- Linux-stable-mirror - lists.linaro.org

Patch "PCI: designware-ep: Fix ->get_msi() to check MSI_EN bit" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI: designware-ep: Fix ->get_msi() to check MSI_EN bit to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-designware-ep-fix-get_msi-to-check-msi_en-bit.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:40 CET 2018 From: Kishon Vijay Abraham I <kishon(a)ti.com> Date: Tue, 19 Dec 2017 15:25:41 +0530 Subject: PCI: designware-ep: Fix ->get_msi() to check MSI_EN bit From: Kishon Vijay Abraham I <kishon(a)ti.com> [ Upstream commit a134a457ed985dca8cce7ac4ea66129ea70eba73 ] ->get_msi() now checks MSI_EN bit in the MSI CAPABILITY register to find whether the host supports MSI instead of using the MSI ADDRESS in the MSI CAPABILITY register. This fixes the issue with the following sequence 'modprobe pci_endpoint_test' enables MSI 'rmmod pci_endpoint_test' disables MSI but MSI address (in EP's capability register) has a valid value 'modprobe pci_endpoint_test no_msi=1' - Since MSI address (in EP's capability register) has a valid value (set during the previous insertion of the module), EP thinks host supports MSI. Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support") Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/dwc/pcie-designware-ep.c | 12 +++--------- drivers/pci/dwc/pcie-designware.h | 1 + 2 files changed, 4 insertions(+), 9 deletions(-) --- a/drivers/pci/dwc/pcie-designware-ep.c +++ b/drivers/pci/dwc/pcie-designware-ep.c @@ -197,20 +197,14 @@ static int dw_pcie_ep_map_addr(struct pc static int dw_pcie_ep_get_msi(struct pci_epc *epc) { int val; - u32 lower_addr; - u32 upper_addr; struct dw_pcie_ep *ep = epc_get_drvdata(epc); struct dw_pcie *pci = to_dw_pcie_from_ep(ep); - val = dw_pcie_readb_dbi(pci, MSI_MESSAGE_CONTROL); - val = (val & MSI_CAP_MME_MASK) >> MSI_CAP_MME_SHIFT; - - lower_addr = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_L32); - upper_addr = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_U32); - - if (!(lower_addr || upper_addr)) + val = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL); + if (!(val & MSI_CAP_MSI_EN_MASK)) return -EINVAL; + val = (val & MSI_CAP_MME_MASK) >> MSI_CAP_MME_SHIFT; return val; } --- a/drivers/pci/dwc/pcie-designware.h +++ b/drivers/pci/dwc/pcie-designware.h @@ -101,6 +101,7 @@ #define MSI_MESSAGE_CONTROL 0x52 #define MSI_CAP_MMC_SHIFT 1 #define MSI_CAP_MME_SHIFT 4 +#define MSI_CAP_MSI_EN_MASK 0x1 #define MSI_CAP_MME_MASK (7 << MSI_CAP_MME_SHIFT) #define MSI_MESSAGE_ADDR_L32 0x54 #define MSI_MESSAGE_ADDR_U32 0x58 Patches currently in stable-queue which might be from kishon(a)ti.com are queue-4.15/pci-endpoint-fix-find_first_zero_bit-usage.patch queue-4.15/pci-designware-ep-fix-get_msi-to-check-msi_en-bit.patch

7 years, 3 months

1
0
0 0

Patch "PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-aspm-calculate-ltr_l1.2_threshold-from-device-characteristics.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Bjorn Helgaas <bhelgaas(a)google.com> Date: Fri, 17 Nov 2017 14:26:42 -0600 Subject: PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics From: Bjorn Helgaas <bhelgaas(a)google.com> [ Upstream commit 80d7d7a904fac3f8114448dbb8cc9fa253b10120 ] Per PCIe r3.1, sec 5.5.1, LTR_L1.2_THRESHOLD determines whether we enter the L1.2 Link state: if L1.2 is enabled and downstream devices have reported that they can tolerate latency of at least LTR_L1.2_THRESHOLD, we must enter L1.2 when CLKREQ# is de-asserted. The implication is that LTR_L1.2_THRESHOLD is the time required to transition the Link from L0 to L1.2 and back to L0, and per sec 5.5.3.3.1, Figures 5-16 and 5-17, it appears that the absolute minimum time for those transitions would be T(POWER_OFF) + T(L1.2) + T(POWER_ON) + T(COMMONMODE). Therefore, compute LTR_L1.2_THRESHOLD as: 2us T(POWER_OFF) + 4us T(L1.2) + T(POWER_ON) + T(COMMONMODE) = LTR_L1.2_THRESHOLD Previously we set LTR_L1.2_THRESHOLD to a fixed value of 163840ns (163.84us): #define LTR_L1_2_THRESHOLD_BITS ((1 << 21) | (1 << 23) | (1 << 30)) ((1 << 21) | (1 << 23) | (1 << 30)) = 0x40a00000 LTR_L1.2_THRESHOLD_Value = (0x40a00000 & 0x03ff0000) >> 16 = 0xa0 = 160 LTR_L1.2_THRESHOLD_Scale = (0x40a00000 & 0xe0000000) >> 29 = 0x2 (* 1024ns) LTR_L1.2_THRESHOLD = 160 * 1024ns = 163840ns Obviously this doesn't account for the circuit characteristics of different implementations. Note that while firmware may enable LTR, Linux itself currently does not enable LTR. When L1.2 is enabled but LTR is not, LTR_L1.2_THRESHOLD is ignored and we always enter L1.2 when it is enabled and CLKREQ# is de-asserted. So this patch should not have any effect unless firmware enables LTR. Fixes: f1f0366dd6be ("PCI/ASPM: Calculate and save the L1.2 timing parameters") Link: https://www.coreboot.org/pipermail/coreboot-gerrit/2015-March/021134.html Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Reviewed-by: Vidya Sagar <vidyas(a)nvidia.com> Cc: Kenji Chen <kenji.chen(a)intel.com> Cc: Patrick Georgi <pgeorgi(a)google.com> Cc: Rajat Jain <rajatja(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/pcie/aspm.c | 71 +++++++++++++++++++++++++++++++----------------- 1 file changed, 47 insertions(+), 24 deletions(-) --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -43,18 +43,6 @@ #define ASPM_STATE_ALL (ASPM_STATE_L0S | ASPM_STATE_L1 | \ ASPM_STATE_L1SS) -/* - * When L1 substates are enabled, the LTR L1.2 threshold is a timing parameter - * that decides whether L1.1 or L1.2 is entered (Refer PCIe spec for details). - * Not sure is there is a way to "calculate" this on the fly, but maybe we - * could turn it into a parameter in future. This value has been taken from - * the following files from Intel's coreboot (which is the only code I found - * to have used this): - * https://www.coreboot.org/pipermail/coreboot-gerrit/2015-March/021134.html - * https://review.coreboot.org/#/c/8832/ - */ -#define LTR_L1_2_THRESHOLD_BITS ((1 << 21) | (1 << 23) | (1 << 30)) - struct aspm_latency { u32 l0s; /* L0s latency (nsec) */ u32 l1; /* L1 latency (nsec) */ @@ -333,6 +321,32 @@ static u32 calc_l1ss_pwron(struct pci_de return 0; } +static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value) +{ + u64 threshold_ns = threshold_us * 1000; + + /* See PCIe r3.1, sec 7.33.3 and sec 6.18 */ + if (threshold_ns < 32) { + *scale = 0; + *value = threshold_ns; + } else if (threshold_ns < 1024) { + *scale = 1; + *value = threshold_ns >> 5; + } else if (threshold_ns < 32768) { + *scale = 2; + *value = threshold_ns >> 10; + } else if (threshold_ns < 1048576) { + *scale = 3; + *value = threshold_ns >> 15; + } else if (threshold_ns < 33554432) { + *scale = 4; + *value = threshold_ns >> 20; + } else { + *scale = 5; + *value = threshold_ns >> 25; + } +} + struct aspm_register_info { u32 support:2; u32 enabled:2; @@ -443,6 +457,7 @@ static void aspm_calc_l1ss_info(struct p struct aspm_register_info *dwreg) { u32 val1, val2, scale1, scale2; + u32 t_common_mode, t_power_on, l1_2_threshold, scale, value; link->l1ss.up_cap_ptr = upreg->l1ss_cap_ptr; link->l1ss.dw_cap_ptr = dwreg->l1ss_cap_ptr; @@ -454,16 +469,7 @@ static void aspm_calc_l1ss_info(struct p /* Choose the greater of the two Port Common_Mode_Restore_Times */ val1 = (upreg->l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8; val2 = (dwreg->l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8; - if (val1 > val2) - link->l1ss.ctl1 |= val1 << 8; - else - link->l1ss.ctl1 |= val2 << 8; - - /* - * We currently use LTR L1.2 threshold to be fixed constant picked from - * Intel's coreboot. - */ - link->l1ss.ctl1 |= LTR_L1_2_THRESHOLD_BITS; + t_common_mode = max(val1, val2); /* Choose the greater of the two Port T_POWER_ON times */ val1 = (upreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19; @@ -472,10 +478,27 @@ static void aspm_calc_l1ss_info(struct p scale2 = (dwreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16; if (calc_l1ss_pwron(link->pdev, scale1, val1) > - calc_l1ss_pwron(link->downstream, scale2, val2)) + calc_l1ss_pwron(link->downstream, scale2, val2)) { link->l1ss.ctl2 |= scale1 | (val1 << 3); - else + t_power_on = calc_l1ss_pwron(link->pdev, scale1, val1); + } else { link->l1ss.ctl2 |= scale2 | (val2 << 3); + t_power_on = calc_l1ss_pwron(link->downstream, scale2, val2); + } + + /* + * Set LTR_L1.2_THRESHOLD to the time required to transition the + * Link from L0 to L1.2 and back to L0 so we enter L1.2 only if + * downstream devices report (via LTR) that they can tolerate at + * least that much latency. + * + * Based on PCIe r3.1, sec 5.5.3.3.1, Figures 5-16 and 5-17, and + * Table 5-11. T(POWER_OFF) is at most 2us and T(L1.2) is at + * least 4us. + */ + l1_2_threshold = 2 + 4 + t_common_mode + t_power_on; + encode_l12_threshold(l1_2_threshold, &scale, &value); + link->l1ss.ctl1 |= t_common_mode << 8 | scale << 29 | value << 16; } static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) Patches currently in stable-queue which might be from bhelgaas(a)google.com are queue-4.15/vgacon-set-vga-struct-resource-types.patch queue-4.15/pci-aspm-calculate-ltr_l1.2_threshold-from-device-characteristics.patch

7 years, 3 months

1
0
0 0

Patch "omapdrm: panel: fix compatible vendor string for td028ttec1" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled omapdrm: panel: fix compatible vendor string for td028ttec1 to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: omapdrm-panel-fix-compatible-vendor-string-for-td028ttec1.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: "H. Nikolaus Schaller" <hns(a)goldelico.com> Date: Tue, 28 Nov 2017 16:48:54 +0100 Subject: omapdrm: panel: fix compatible vendor string for td028ttec1 From: "H. Nikolaus Schaller" <hns(a)goldelico.com> [ Upstream commit c1b9d4c75cd549e08bd0596d7f9dcc20f7f6e8fa ] The vendor name was "toppoly" but other panels and the vendor list have defined it as "tpo". So let's fix it in driver and bindings. We keep the old definition in parallel to stay compatible with potential older DTB setup. Signed-off-by: H. Nikolaus Schaller <hns(a)goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen(a)ti.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt | 30 ---------- Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt | 30 ++++++++++ drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c | 3 + drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c | 3 + 4 files changed, 36 insertions(+), 30 deletions(-) rename Documentation/devicetree/bindings/display/panel/{toppoly,td028ttec1.txt => tpo,td028ttec1.txt} (84%) --- a/Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt +++ /dev/null @@ -1,30 +0,0 @@ -Toppoly TD028TTEC1 Panel -======================== - -Required properties: -- compatible: "toppoly,td028ttec1" - -Optional properties: -- label: a symbolic name for the panel - -Required nodes: -- Video port for DPI input - -Example -------- - -lcd-panel: td028ttec1@0 { - compatible = "toppoly,td028ttec1"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - label = "lcd"; - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; - --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt @@ -0,0 +1,30 @@ +Toppoly TD028TTEC1 Panel +======================== + +Required properties: +- compatible: "tpo,td028ttec1" + +Optional properties: +- label: a symbolic name for the panel + +Required nodes: +- Video port for DPI input + +Example +------- + +lcd-panel: td028ttec1@0 { + compatible = "tpo,td028ttec1"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; +}; + --- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c +++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c @@ -452,6 +452,8 @@ static int td028ttec1_panel_remove(struc } static const struct of_device_id td028ttec1_of_match[] = { + { .compatible = "omapdss,tpo,td028ttec1", }, + /* keep to not break older DTB */ { .compatible = "omapdss,toppoly,td028ttec1", }, {}, }; @@ -471,6 +473,7 @@ static struct spi_driver td028ttec1_spi_ module_spi_driver(td028ttec1_spi_driver); +MODULE_ALIAS("spi:tpo,td028ttec1"); MODULE_ALIAS("spi:toppoly,td028ttec1"); MODULE_AUTHOR("H. Nikolaus Schaller <hns(a)goldelico.com>"); MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver"); --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c @@ -455,6 +455,8 @@ static int td028ttec1_panel_remove(struc } static const struct of_device_id td028ttec1_of_match[] = { + { .compatible = "omapdss,tpo,td028ttec1", }, + /* keep to not break older DTB */ { .compatible = "omapdss,toppoly,td028ttec1", }, {}, }; @@ -474,6 +476,7 @@ static struct spi_driver td028ttec1_spi_ module_spi_driver(td028ttec1_spi_driver); +MODULE_ALIAS("spi:tpo,td028ttec1"); MODULE_ALIAS("spi:toppoly,td028ttec1"); MODULE_AUTHOR("H. Nikolaus Schaller <hns(a)goldelico.com>"); MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver"); Patches currently in stable-queue which might be from hns(a)goldelico.com are queue-4.15/omapdrm-panel-fix-compatible-vendor-string-for-td028ttec1.patch

7 years, 3 months

1
0
0 0

Patch "nfsd4: permit layoutget of executable-only files" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nfsd4: permit layoutget of executable-only files to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nfsd4-permit-layoutget-of-executable-only-files.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:40 CET 2018 From: Benjamin Coddington <bcodding(a)redhat.com> Date: Tue, 19 Dec 2017 09:35:25 -0500 Subject: nfsd4: permit layoutget of executable-only files From: Benjamin Coddington <bcodding(a)redhat.com> [ Upstream commit 66282ec1cf004c09083c29cb5e49019037937bbd ] Clients must be able to read a file in order to execute it, and for pNFS that means the client needs to be able to perform a LAYOUTGET on the file. This behavior for executable-only files was added for OPEN in commit a043226bc140 "nfsd4: permit read opens of executable-only files". This fixes up xfstests generic/126 on block/scsi layouts. Signed-off-by: Benjamin Coddington <bcodding(a)redhat.com> Signed-off-by: J. Bruce Fields <bfields(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfsd/nfs4proc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -1363,14 +1363,14 @@ nfsd4_layoutget(struct svc_rqst *rqstp, const struct nfsd4_layout_ops *ops; struct nfs4_layout_stateid *ls; __be32 nfserr; - int accmode; + int accmode = NFSD_MAY_READ_IF_EXEC; switch (lgp->lg_seg.iomode) { case IOMODE_READ: - accmode = NFSD_MAY_READ; + accmode |= NFSD_MAY_READ; break; case IOMODE_RW: - accmode = NFSD_MAY_READ | NFSD_MAY_WRITE; + accmode |= NFSD_MAY_READ | NFSD_MAY_WRITE; break; default: dprintk("%s: invalid iomode %d\n", Patches currently in stable-queue which might be from bcodding(a)redhat.com are queue-4.15/nfsd4-permit-layoutget-of-executable-only-files.patch

7 years, 3 months

1
0
0 0

Patch "net: phy: meson-gxl: check phy_write return value" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: phy: meson-gxl: check phy_write return value to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-phy-meson-gxl-check-phy_write-return-value.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Jerome Brunet <jbrunet(a)baylibre.com> Date: Mon, 18 Dec 2017 10:44:40 +0100 Subject: net: phy: meson-gxl: check phy_write return value From: Jerome Brunet <jbrunet(a)baylibre.com> [ Upstream commit 9042b46eda33ef5db3cdfc9e12b3c8cabb196141 ] Always check phy_write return values. Better to be safe than sorry Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> Signed-off-by: Jerome Brunet <jbrunet(a)baylibre.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/phy/meson-gxl.c | 50 +++++++++++++++++++++++++++++++++----------- 1 file changed, 38 insertions(+), 12 deletions(-) --- a/drivers/net/phy/meson-gxl.c +++ b/drivers/net/phy/meson-gxl.c @@ -26,27 +26,53 @@ static int meson_gxl_config_init(struct phy_device *phydev) { + int ret; + /* Enable Analog and DSP register Bank access by */ - phy_write(phydev, 0x14, 0x0000); - phy_write(phydev, 0x14, 0x0400); - phy_write(phydev, 0x14, 0x0000); - phy_write(phydev, 0x14, 0x0400); + ret = phy_write(phydev, 0x14, 0x0000); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x0400); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x0000); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x0400); + if (ret) + return ret; /* Write Analog register 23 */ - phy_write(phydev, 0x17, 0x8E0D); - phy_write(phydev, 0x14, 0x4417); + ret = phy_write(phydev, 0x17, 0x8E0D); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x4417); + if (ret) + return ret; /* Enable fractional PLL */ - phy_write(phydev, 0x17, 0x0005); - phy_write(phydev, 0x14, 0x5C1B); + ret = phy_write(phydev, 0x17, 0x0005); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x5C1B); + if (ret) + return ret; /* Program fraction FR_PLL_DIV1 */ - phy_write(phydev, 0x17, 0x029A); - phy_write(phydev, 0x14, 0x5C1D); + ret = phy_write(phydev, 0x17, 0x029A); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x5C1D); + if (ret) + return ret; /* Program fraction FR_PLL_DIV1 */ - phy_write(phydev, 0x17, 0xAAAA); - phy_write(phydev, 0x14, 0x5C1C); + ret = phy_write(phydev, 0x17, 0xAAAA); + if (ret) + return ret; + ret = phy_write(phydev, 0x14, 0x5C1C); + if (ret) + return ret; return 0; } Patches currently in stable-queue which might be from jbrunet(a)baylibre.com are queue-4.15/clk-check-ops-pointer-on-clock-register.patch queue-4.15/net-phy-meson-gxl-check-phy_write-return-value.patch queue-4.15/clk-use-round-rate-to-bail-out-early-in-set_rate.patch

7 years, 3 months

1
0
0 0

Patch "net: fec: add phy_reset_after_clk_enable() support" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: fec: add phy_reset_after_clk_enable() support to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-fec-add-phy_reset_after_clk_enable-support.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Richard Leitner <richard.leitner(a)skidata.com> Date: Mon, 11 Dec 2017 13:17:00 +0100 Subject: net: fec: add phy_reset_after_clk_enable() support From: Richard Leitner <richard.leitner(a)skidata.com> [ Upstream commit 1b0a83ac04e383e3bed21332962b90710fcf2828 ] Some PHYs (for example the SMSC LAN8710/LAN8720) doesn't allow turning the refclk on and off again during operation (according to their datasheet). Nonetheless exactly this behaviour was introduced for power saving reasons by commit e8fcfcd5684a ("net: fec: optimize the clock management to save power"). Therefore add support for the phy_reset_after_clk_enable function from phylib to mitigate this issue. Generally speaking this issue is only relevant if the ref clk for the PHY is generated by the SoC and therefore the PHY is configured to "REF_CLK In Mode". In our specific case (PCB) this problem does occur at about every 10th to 50th POR of an LAN8710 connected to an i.MX6SOLO SoC. The typical symptom of this problem is a "swinging" ethernet link. Similar issues were reported by users of the NXP forum: https://community.nxp.com/thread/389902 https://community.nxp.com/message/309354 With this patch applied the issue didn't occur for at least a few hundret PORs of our board. Fixes: e8fcfcd5684a ("net: fec: optimize the clock management to save power") Signed-off-by: Richard Leitner <richard.leitner(a)skidata.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/freescale/fec_main.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -1868,6 +1868,8 @@ static int fec_enet_clk_enable(struct ne ret = clk_prepare_enable(fep->clk_ref); if (ret) goto failed_clk_ref; + + phy_reset_after_clk_enable(ndev->phydev); } else { clk_disable_unprepare(fep->clk_ahb); clk_disable_unprepare(fep->clk_enet_out); @@ -2840,6 +2842,7 @@ fec_enet_open(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); int ret; + bool reset_again; ret = pm_runtime_get_sync(&fep->pdev->dev); if (ret < 0) @@ -2850,6 +2853,17 @@ fec_enet_open(struct net_device *ndev) if (ret) goto clk_enable; + /* During the first fec_enet_open call the PHY isn't probed at this + * point. Therefore the phy_reset_after_clk_enable() call within + * fec_enet_clk_enable() fails. As we need this reset in order to be + * sure the PHY is working correctly we check if we need to reset again + * later when the PHY is probed + */ + if (ndev->phydev && ndev->phydev->drv) + reset_again = false; + else + reset_again = true; + /* I should reset the ring buffers here, but I don't yet know * a simple way to do that. */ @@ -2866,6 +2880,12 @@ fec_enet_open(struct net_device *ndev) if (ret) goto err_enet_mii_probe; + /* Call phy_reset_after_clk_enable() again if it failed during + * phy_reset_after_clk_enable() before because the PHY wasn't probed. + */ + if (reset_again) + phy_reset_after_clk_enable(ndev->phydev); + if (fep->quirks & FEC_QUIRK_ERR006687) imx6q_cpuidle_fec_irqs_used(); Patches currently in stable-queue which might be from richard.leitner(a)skidata.com are queue-4.15/net-fec-add-phy_reset_after_clk_enable-support.patch

7 years, 3 months

1
0
0 0

Patch "mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mmc-sdhci-xenon-wait-5ms-after-set-1.8v-signal-enable.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Zhoujie Wu <zjwu(a)marvell.com> Date: Mon, 18 Dec 2017 14:38:47 -0800 Subject: mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable From: Zhoujie Wu <zjwu(a)marvell.com> [ Upstream commit 8d876bf472dba73c015cea9feea80dcb80626a7c ] According to SD spec 3.00 3.6.1 signal voltage switch procedure step 6~8, (6) Set 1.8V Signal Enable in the Host Control 2 register. (7) Wait 5ms. 1.8V voltage regulator shall be stable within this period. (8) If 1.8V Signal Enable is cleared by Host Controller, go to step (12). Host should wait 5ms after set 1.8V signal enable bit in Host Control 2 register and check if 1.8V is stable or not. But current code checks this bit right after set it. On some platforms with xenon controller found the bit is cleared right away and host reports "1.8V regulator output did not became stable" and 5ms delay can help. Implement voltage_switch callback for xenon controller to add 5ms delay to make sure the 1.8V signal enable bit is set by controller. Signed-off-by: Zhoujie Wu <zjwu(a)marvell.com> Acked-by: Adrian Hunter <adrian.hunter(a)intel.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mmc/host/sdhci-xenon.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/mmc/host/sdhci-xenon.c +++ b/drivers/mmc/host/sdhci-xenon.c @@ -230,7 +230,14 @@ static void xenon_set_power(struct sdhci mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); } +static void xenon_voltage_switch(struct sdhci_host *host) +{ + /* Wait for 5ms after set 1.8V signal enable bit */ + usleep_range(5000, 5500); +} + static const struct sdhci_ops sdhci_xenon_ops = { + .voltage_switch = xenon_voltage_switch, .set_clock = sdhci_set_clock, .set_power = xenon_set_power, .set_bus_width = sdhci_set_bus_width, Patches currently in stable-queue which might be from zjwu(a)marvell.com are queue-4.15/mmc-sdhci-xenon-wait-5ms-after-set-1.8v-signal-enable.patch

7 years, 3 months

1
0
0 0

Patch "mmc: block: fix logical error to avoid memory leak" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mmc: block: fix logical error to avoid memory leak to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mmc-block-fix-logical-error-to-avoid-memory-leak.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: "Liu, Changcheng" <changcheng.liu(a)intel.com> Date: Sat, 16 Dec 2017 23:15:45 +0800 Subject: mmc: block: fix logical error to avoid memory leak From: "Liu, Changcheng" <changcheng.liu(a)intel.com> [ Upstream commit 0be55579a127916ebe39db2a74d906a2dfceed42 ] If the MMC_DRV_OP_GET_EXT_CSD request completes successfully, then ext_csd must be freed, but in one case it was not. Fix that. Signed-off-by: Liu Changcheng <changcheng.liu(a)intel.com> Acked-by: Adrian Hunter <adrian.hunter(a)intel.com> Acked-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mmc/core/block.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -2623,6 +2623,7 @@ static int mmc_ext_csd_open(struct inode if (n != EXT_CSD_STR_LEN) { err = -EINVAL; + kfree(ext_csd); goto out_free; } Patches currently in stable-queue which might be from changcheng.liu(a)intel.com are queue-4.15/mmc-block-fix-logical-error-to-avoid-memory-leak.patch

7 years, 3 months

1
0
0 0

Patch "mmc: avoid removing non-removable hosts during suspend" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mmc: avoid removing non-removable hosts during suspend to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mmc-avoid-removing-non-removable-hosts-during-suspend.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Daniel Drake <drake(a)endlessm.com> Date: Tue, 12 Dec 2017 10:49:02 +0000 Subject: mmc: avoid removing non-removable hosts during suspend From: Daniel Drake <drake(a)endlessm.com> [ Upstream commit de8dcc3d2c0e08e5068ee1e26fc46415c15e3637 ] The Weibu F3C MiniPC has an onboard AP6255 module, presenting two SDIO functions on a single MMC host (Bluetooth/btsdio and WiFi/brcmfmac), and the mmc layer correctly detects this as non-removable. After suspend/resume, the wifi and bluetooth interfaces disappear and do not get probed again. The conditions here are: 1. During suspend, we reach mmc_pm_notify() 2. mmc_pm_notify() calls mmc_sdio_pre_suspend() to see if we can suspend the SDIO host. However, mmc_sdio_pre_suspend() returns -ENOSYS because btsdio_driver does not have a suspend method. 3. mmc_pm_notify() proceeds to remove the card 4. Upon resume, mmc_rescan() does nothing with this host, because of the rescan_entered check which aims to only scan a non-removable device a single time (i.e. during boot). Fix the loss of functionality by detecting that we are unable to suspend a non-removable host, so avoid the forced removal in that case. The comment above this function already indicates that this code was only intended for removable devices. Signed-off-by: Daniel Drake <drake(a)endlessm.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mmc/core/core.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2959,6 +2959,14 @@ static int mmc_pm_notify(struct notifier if (!err) break; + if (!mmc_card_is_removable(host)) { + dev_warn(mmc_dev(host), + "pre_suspend failed for non-removable host: " + "%d\n", err); + /* Avoid removing non-removable hosts */ + break; + } + /* Calling bus_ops->remove() with a claimed host can deadlock */ host->bus_ops->remove(host); mmc_claim_host(host); Patches currently in stable-queue which might be from drake(a)endlessm.com are queue-4.15/mmc-avoid-removing-non-removable-hosts-during-suspend.patch

7 years, 3 months

1
0
0 0

Patch "media: s5p-mfc: Fix lock contention - request_firmware() once" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: s5p-mfc: Fix lock contention - request_firmware() once to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-s5p-mfc-fix-lock-contention-request_firmware-once.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Shuah Khan <shuahkh(a)osg.samsung.com> Date: Fri, 3 Nov 2017 22:01:58 -0400 Subject: media: s5p-mfc: Fix lock contention - request_firmware() once From: Shuah Khan <shuahkh(a)osg.samsung.com> [ Upstream commit f45ce9877561044090010e0eb0fad644232ded04 ] Driver calls request_firmware() whenever the device is opened for the first time. As the device gets opened and closed, dev->num_inst == 1 is true several times. This is not necessary since the firmware is saved in the fw_buf. s5p_mfc_load_firmware() copies the buffer returned by the request_firmware() to dev->fw_buf. fw_buf sticks around until it gets released from s5p_mfc_remove(), hence there is no need to keep requesting firmware and copying it to fw_buf. This might have been overlooked when changes are made to free fw_buf from the device release interface s5p_mfc_release(). Fix s5p_mfc_load_firmware() to call request_firmware() once and keep state. Change _probe() to load firmware once fw_buf has been allocated. s5p_mfc_open() and it continues to call s5p_mfc_load_firmware() and init hardware which is the step where firmware is written to the device. This addresses the mfc_mutex contention due to repeated request_firmware() calls from open() in the following circular locking warning: [ 552.194115] qtdemux0:sink/2710 is trying to acquire lock: [ 552.199488] (&dev->mfc_mutex){+.+.}, at: [<bf145544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc] [ 552.207459] but task is already holding lock: [ 552.213264] (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8 [ 552.220284] which lock already depends on the new lock. [ 552.228429] the existing dependency chain (in reverse order) is: [ 552.235881] -> #2 (&mm->mmap_sem){++++}: [ 552.241259] __might_fault+0x80/0xb0 [ 552.245331] filldir64+0xc0/0x2f8 [ 552.249144] call_filldir+0xb0/0x14c [ 552.253214] ext4_readdir+0x768/0x90c [ 552.257374] iterate_dir+0x74/0x168 [ 552.261360] SyS_getdents64+0x7c/0x1a0 [ 552.265608] ret_fast_syscall+0x0/0x28 [ 552.269850] -> #1 (&type->i_mutex_dir_key#2){++++}: [ 552.276180] down_read+0x48/0x90 [ 552.279904] lookup_slow+0x74/0x178 [ 552.283889] walk_component+0x1a4/0x2e4 [ 552.288222] link_path_walk+0x174/0x4a0 [ 552.292555] path_openat+0x68/0x944 [ 552.296541] do_filp_open+0x60/0xc4 [ 552.300528] file_open_name+0xe4/0x114 [ 552.304772] filp_open+0x28/0x48 [ 552.308499] kernel_read_file_from_path+0x30/0x78 [ 552.313700] _request_firmware+0x3ec/0x78c [ 552.318291] request_firmware+0x3c/0x54 [ 552.322642] s5p_mfc_load_firmware+0x54/0x150 [s5p_mfc] [ 552.328358] s5p_mfc_open+0x4e4/0x550 [s5p_mfc] [ 552.333394] v4l2_open+0xa0/0x104 [videodev] [ 552.338137] chrdev_open+0xa4/0x18c [ 552.342121] do_dentry_open+0x208/0x310 [ 552.346454] path_openat+0x28c/0x944 [ 552.350526] do_filp_open+0x60/0xc4 [ 552.354512] do_sys_open+0x118/0x1c8 [ 552.358586] ret_fast_syscall+0x0/0x28 [ 552.362830] -> #0 (&dev->mfc_mutex){+.+.}: -> #0 (&dev->mfc_mutex){+.+.}: [ 552.368379] lock_acquire+0x6c/0x88 [ 552.372364] __mutex_lock+0x68/0xa34 [ 552.376437] mutex_lock_interruptible_nested+0x1c/0x24 [ 552.382086] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc] [ 552.386939] v4l2_mmap+0x54/0x88 [videodev] [ 552.391601] mmap_region+0x3a8/0x638 [ 552.395673] do_mmap+0x330/0x3a4 [ 552.399400] vm_mmap_pgoff+0x90/0xb8 [ 552.403472] SyS_mmap_pgoff+0x90/0xc0 [ 552.407632] ret_fast_syscall+0x0/0x28 [ 552.411876] other info that might help us debug this: [ 552.419848] Chain exists of: &dev->mfc_mutex --> &type->i_mutex_dir_key#2 --> &mm->mmap_sem [ 552.431200] Possible unsafe locking scenario: [ 552.437092] CPU0 CPU1 [ 552.441598] ---- ---- [ 552.446104] lock(&mm->mmap_sem); [ 552.449484] lock(&type->i_mutex_dir_key#2); [ 552.456329] lock(&mm->mmap_sem); [ 552.462222] lock(&dev->mfc_mutex); [ 552.465775] *** DEADLOCK *** Signed-off-by: Shuah Khan <shuahkh(a)osg.samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki(a)samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/platform/s5p-mfc/s5p_mfc.c | 6 ++++++ drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 3 +++ drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 5 +++++ 3 files changed, 14 insertions(+) --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -1309,6 +1309,12 @@ static int s5p_mfc_probe(struct platform goto err_dma; } + /* + * Load fails if fs isn't mounted. Try loading anyway. + * _open() will load it, it it fails now. Ignore failure. + */ + s5p_mfc_load_firmware(dev); + mutex_init(&dev->mfc_mutex); init_waitqueue_head(&dev->queue); dev->hw_lock = 0; --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -290,6 +290,8 @@ struct s5p_mfc_priv_buf { * @mfc_cmds: cmd structure holding HW commands function pointers * @mfc_regs: structure holding MFC registers * @fw_ver: loaded firmware sub-version + * @fw_get_done flag set when request_firmware() is complete and + * copied into fw_buf * risc_on: flag indicates RISC is on or off * */ @@ -336,6 +338,7 @@ struct s5p_mfc_dev { struct s5p_mfc_hw_cmds *mfc_cmds; const struct s5p_mfc_regs *mfc_regs; enum s5p_mfc_fw_ver fw_ver; + bool fw_get_done; bool risc_on; /* indicates if RISC is on or off */ }; --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c @@ -55,6 +55,9 @@ int s5p_mfc_load_firmware(struct s5p_mfc * into kernel. */ mfc_debug_enter(); + if (dev->fw_get_done) + return 0; + for (i = MFC_FW_MAX_VERSIONS - 1; i >= 0; i--) { if (!dev->variant->fw_name[i]) continue; @@ -82,6 +85,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc } memcpy(dev->fw_buf.virt, fw_blob->data, fw_blob->size); wmb(); + dev->fw_get_done = true; release_firmware(fw_blob); mfc_debug_leave(); return 0; @@ -93,6 +97,7 @@ int s5p_mfc_release_firmware(struct s5p_ /* Before calling this function one has to make sure * that MFC is no longer processing */ s5p_mfc_release_priv_buf(dev, &dev->fw_buf); + dev->fw_get_done = false; return 0; } Patches currently in stable-queue which might be from shuahkh(a)osg.samsung.com are queue-4.15/media-s5p-mfc-fix-lock-contention-request_firmware-once.patch

7 years, 3 months

1
0
0 0

Patch "media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-media-dvb-frontends-add-delay-to-si2168-restart.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Ron Economos <w6rz(a)comcast.net> Date: Mon, 11 Dec 2017 19:51:53 -0500 Subject: media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart From: Ron Economos <w6rz(a)comcast.net> [ Upstream commit 380a6c86457573aa42d27ae11e025eb25941a0b7 ] On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart. Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem. Signed-off-by: Ron Economos <w6rz(a)comcast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/dvb-frontends/si2168.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/media/dvb-frontends/si2168.c +++ b/drivers/media/dvb-frontends/si2168.c @@ -14,6 +14,8 @@ * GNU General Public License for more details. */ +#include <linux/delay.h> + #include "si2168_priv.h" static const struct dvb_frontend_ops si2168_ops; @@ -435,6 +437,7 @@ static int si2168_init(struct dvb_fronte if (ret) goto err; + udelay(100); memcpy(cmd.args, "\x85", 1); cmd.wlen = 1; cmd.rlen = 1; Patches currently in stable-queue which might be from w6rz(a)comcast.net are queue-4.15/media-media-dvb-frontends-add-delay-to-si2168-restart.patch

7 years, 3 months

1
0
0 0

Patch "media: davinci: fix a debug printk" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: davinci: fix a debug printk to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-davinci-fix-a-debug-printk.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:40 CET 2018 From: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Date: Wed, 1 Nov 2017 17:05:49 -0400 Subject: media: davinci: fix a debug printk From: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> [ Upstream commit 4f6c11044f512356cb63d3df0f3b38db79dc6736 ] Two orthogonal changesets caused a breakage at a printk inside davinci. Commit a2d17962c9ca ("[media] davinci: Switch from V4L2 OF to V4L2 fwnode") made davinci to use struct fwnode_handle instead of struct device_node. Commit 68d9c47b1679 ("media: Convert to using %pOF instead of full_name") changed the printk to not use ->full_name, but, instead, to rely on %pOF. With both patches applied, the Kernel will do the wrong thing, as warned by smatch: drivers/media/platform/davinci/vpif_capture.c:1399 vpif_async_bound() error: '%pOF' expects argument of type 'struct device_node*', argument 5 has type 'void*' So, change the logic to actually print the device name that was obtained before the print logic. Fixes: 68d9c47b1679 ("media: Convert to using %pOF instead of full_name") Fixes: a2d17962c9ca ("[media] davinci: Switch from V4L2 OF to V4L2 fwnode") Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Acked-by: Lad, Prabhakar <prabhakar.csengg(a)gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/platform/davinci/vpif_capture.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/media/platform/davinci/vpif_capture.c +++ b/drivers/media/platform/davinci/vpif_capture.c @@ -1397,9 +1397,9 @@ static int vpif_async_bound(struct v4l2_ vpif_obj.config->chan_config->inputs[i].subdev_name = (char *)to_of_node(subdev->fwnode)->full_name; vpif_dbg(2, debug, - "%s: setting input %d subdev_name = %pOF\n", + "%s: setting input %d subdev_name = %s\n", __func__, i, - to_of_node(subdev->fwnode)); + vpif_obj.config->chan_config->inputs[i].subdev_name); return 0; } } Patches currently in stable-queue which might be from mchehab(a)s-opensource.com are queue-4.15/media-s5p-mfc-fix-lock-contention-request_firmware-once.patch queue-4.15/media-media-dvb-frontends-add-delay-to-si2168-restart.patch queue-4.15/media-c8sectpfe-fix-potential-null-pointer-dereference-in-c8sectpfe_timer_interrupt.patch queue-4.15/media-davinci-fix-a-debug-printk.patch queue-4.15/media-bt8xx-fix-err-bt878_probe.patch

7 years, 3 months

1
0
0 0

Patch "media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-c8sectpfe-fix-potential-null-pointer-dereference-in-c8sectpfe_timer_interrupt.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> Date: Mon, 20 Nov 2017 09:00:55 -0500 Subject: media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> [ Upstream commit baed3c4bc4c13de93e0dba0a26d601411ebcb389 ] _channel_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _channel_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support") Signed-off-by: Gustavo A. R. Silva <garsilva(a)embeddedor.com> Acked-by: Patrice Chotard <patrice.chotard(a)st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c @@ -83,7 +83,7 @@ static void c8sectpfe_timer_interrupt(st static void channel_swdemux_tsklet(unsigned long data) { struct channel_info *channel = (struct channel_info *)data; - struct c8sectpfei *fei = channel->fei; + struct c8sectpfei *fei; unsigned long wp, rp; int pos, num_packets, n, size; u8 *buf; @@ -91,6 +91,8 @@ static void channel_swdemux_tsklet(unsig if (unlikely(!channel || !channel->irec)) return; + fei = channel->fei; + wp = readl(channel->irec + DMA_PRDS_BUSWP_TP(0)); rp = readl(channel->irec + DMA_PRDS_BUSRP_TP(0)); Patches currently in stable-queue which might be from garsilva(a)embeddedor.com are queue-4.15/media-c8sectpfe-fix-potential-null-pointer-dereference-in-c8sectpfe_timer_interrupt.patch

7 years, 3 months

1
0
0 0

Patch "media: bt8xx: Fix err 'bt878_probe()'" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: bt8xx: Fix err 'bt878_probe()' to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-bt8xx-fix-err-bt878_probe.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Thu, 21 Sep 2017 19:23:56 -0400 Subject: media: bt8xx: Fix err 'bt878_probe()' From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 45392ff6881dbe56d41ef0b17c2e576065f8ffa1 ] This is odd to call 'pci_disable_device()' in an error path before a coresponding successful 'pci_enable_device()'. Return directly instead. Fixes: 77e0be12100a ("V4L/DVB (4176): Bug-fix: Fix memory overflow") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/pci/bt8xx/bt878.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/drivers/media/pci/bt8xx/bt878.c +++ b/drivers/media/pci/bt8xx/bt878.c @@ -422,8 +422,7 @@ static int bt878_probe(struct pci_dev *d bt878_num); if (bt878_num >= BT878_MAX) { printk(KERN_ERR "bt878: Too many devices inserted\n"); - result = -ENOMEM; - goto fail0; + return -ENOMEM; } if (pci_enable_device(dev)) return -EIO; Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.15/media-bt8xx-fix-err-bt878_probe.patch

7 years, 3 months

1
0
0 0

Patch "libbpf: prefer global symbols as bpf program name source" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled libbpf: prefer global symbols as bpf program name source to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: libbpf-prefer-global-symbols-as-bpf-program-name-source.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Roman Gushchin <guro(a)fb.com> Date: Wed, 13 Dec 2017 15:18:52 +0000 Subject: libbpf: prefer global symbols as bpf program name source From: Roman Gushchin <guro(a)fb.com> [ Upstream commit fe4d44b23f6b38194a92c6b8a50d921a071c4db4 ] Libbpf picks the name of the first symbol in the corresponding elf section to use as a program name. But without taking symbol's scope into account it may end's up with some local label as a program name. E.g.: $ bpftool prog 1: type 15 name LBB0_10 tag 0390a5136ba23f5c loaded_at Dec 07/17:22 uid 0 xlated 456B not jited memlock 4096B Fix this by preferring global symbols as program name. For instance: $ bpftool prog 1: type 15 name bpf_prog1 tag 0390a5136ba23f5c loaded_at Dec 07/17:26 uid 0 xlated 456B not jited memlock 4096B Signed-off-by: Roman Gushchin <guro(a)fb.com> Cc: Alexei Starovoitov <ast(a)kernel.org> Cc: Daniel Borkmann <daniel(a)iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski(a)netronome.com> Cc: Martin KaFai Lau <kafai(a)fb.com> Cc: Quentin Monnet <quentin.monnet(a)netronome.com> Cc: David Ahern <dsahern(a)gmail.com> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/lib/bpf/libbpf.c | 2 ++ 1 file changed, 2 insertions(+) --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -387,6 +387,8 @@ bpf_object__init_prog_names(struct bpf_o continue; if (sym.st_shndx != prog->idx) continue; + if (GELF_ST_BIND(sym.st_info) != STB_GLOBAL) + continue; name = elf_strptr(obj->efile.elf, obj->efile.strtabidx, Patches currently in stable-queue which might be from guro(a)fb.com are queue-4.15/libbpf-prefer-global-symbols-as-bpf-program-name-source.patch queue-4.15/bpf-cgroup-fix-a-verification-error-for-a-cgroup_device-type-prog.patch

7 years, 3 months

1
0
0 0

Patch "iser-target: avoid reinitializing rdma contexts for isert commands" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iser-target: avoid reinitializing rdma contexts for isert commands to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iser-target-avoid-reinitializing-rdma-contexts-for-isert-commands.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Bharat Potnuri <bharat(a)chelsio.com> Date: Tue, 28 Nov 2017 23:58:07 +0530 Subject: iser-target: avoid reinitializing rdma contexts for isert commands From: Bharat Potnuri <bharat(a)chelsio.com> [ Upstream commit 66f53e6f5400578bae58db0c06d85a8820831f40 ] isert commands that failed during isert_rdma_rw_ctx_post() are queued to Queue-Full(QF) queue and are scheduled to be reposted during queue-full queue processing. During this reposting, the rdma contexts are initialised again in isert_rdma_rw_ctx_post(), which is leaking significant memory. unreferenced object 0xffff8830201d9640 (size 64): comm "kworker/0:2", pid 195, jiffies 4295374851 (age 4528.436s) hex dump (first 32 bytes): 00 60 8b cb 2e 00 00 00 00 10 00 00 00 00 00 00 .`.............. 00 90 e3 cb 2e 00 00 00 00 10 00 00 00 00 00 00 ................ backtrace: [<ffffffff8170711e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811f8ba5>] __kmalloc+0x125/0x2b0 [<ffffffffa046b24f>] rdma_rw_ctx_init+0x15f/0x6f0 [ib_core] [<ffffffffa07ab644>] isert_rdma_rw_ctx_post+0xc4/0x3c0 [ib_isert] [<ffffffffa07ad972>] isert_put_datain+0x112/0x1c0 [ib_isert] [<ffffffffa07dddce>] lio_queue_data_in+0x2e/0x30 [iscsi_target_mod] [<ffffffffa076c322>] target_qf_do_work+0x2b2/0x4b0 [target_core_mod] [<ffffffff81080c3b>] process_one_work+0x1db/0x5d0 [<ffffffff8108107d>] worker_thread+0x4d/0x3e0 [<ffffffff81088667>] kthread+0x117/0x150 [<ffffffff81713fa7>] ret_from_fork+0x27/0x40 [<ffffffffffffffff>] 0xffffffffffffffff Here is patch to use the older rdma contexts while reposting the isert commands intead of reinitialising them. Signed-off-by: Potnuri Bharat Teja <bharat(a)chelsio.com> Reviewed-by: Sagi Grimberg <sagi(a)grimberg.me> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/isert/ib_isert.c | 7 +++++++ drivers/infiniband/ulp/isert/ib_isert.h | 1 + 2 files changed, 8 insertions(+) --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -2124,6 +2124,9 @@ isert_rdma_rw_ctx_post(struct isert_cmd u32 rkey, offset; int ret; + if (cmd->ctx_init_done) + goto rdma_ctx_post; + if (dir == DMA_FROM_DEVICE) { addr = cmd->write_va; rkey = cmd->write_stag; @@ -2151,11 +2154,15 @@ isert_rdma_rw_ctx_post(struct isert_cmd se_cmd->t_data_sg, se_cmd->t_data_nents, offset, addr, rkey, dir); } + if (ret < 0) { isert_err("Cmd: %p failed to prepare RDMA res\n", cmd); return ret; } + cmd->ctx_init_done = true; + +rdma_ctx_post: ret = rdma_rw_ctx_post(&cmd->rw, conn->qp, port_num, cqe, chain_wr); if (ret < 0) isert_err("Cmd: %p failed to post RDMA res\n", cmd); --- a/drivers/infiniband/ulp/isert/ib_isert.h +++ b/drivers/infiniband/ulp/isert/ib_isert.h @@ -126,6 +126,7 @@ struct isert_cmd { struct rdma_rw_ctx rw; struct work_struct comp_work; struct scatterlist sg; + bool ctx_init_done; }; static inline struct isert_cmd *tx_desc_to_cmd(struct iser_tx_desc *desc) Patches currently in stable-queue which might be from bharat(a)chelsio.com are queue-4.15/iser-target-avoid-reinitializing-rdma-contexts-for-isert-commands.patch

7 years, 3 months

1
0
0 0

Patch "ip_gre: fix potential memory leak in erspan_rcv" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ip_gre: fix potential memory leak in erspan_rcv to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ip_gre-fix-potential-memory-leak-in-erspan_rcv.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:40 CET 2018 From: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> Date: Wed, 20 Dec 2017 10:07:00 +0800 Subject: ip_gre: fix potential memory leak in erspan_rcv From: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> [ Upstream commit 50670b6ee9bc4ae8f9ce3112b437987adf273245 ] If md is NULL, tun_dst must be freed, otherwise it will cause memory leak. Fixes: 1a66a836da6 ("gre: add collect_md mode to ERSPAN tunnel") Cc: William Tu <u9012063(a)gmail.com> Signed-off-by: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/ip_gre.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -303,8 +303,10 @@ static int erspan_rcv(struct sk_buff *sk return PACKET_REJECT; md = ip_tunnel_info_opts(&tun_dst->u.tun_info); - if (!md) + if (!md) { + dst_release((struct dst_entry *)tun_dst); return PACKET_REJECT; + } md->index = index; info = &tun_dst->u.tun_info; Patches currently in stable-queue which might be from yanhaishuang(a)cmss.chinamobile.com are queue-4.15/ip_gre-fix-error-path-when-erspan_rcv-failed.patch queue-4.15/ip_gre-fix-potential-memory-leak-in-erspan_rcv.patch

7 years, 3 months

1
0
0 0

Patch "ip_gre: fix error path when erspan_rcv failed" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ip_gre: fix error path when erspan_rcv failed to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ip_gre-fix-error-path-when-erspan_rcv-failed.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:40 CET 2018 From: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> Date: Wed, 20 Dec 2017 10:21:46 +0800 Subject: ip_gre: fix error path when erspan_rcv failed From: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> [ Upstream commit dd8d5b8c5b22e31079b259b8bfb686f1fac1080a ] When erspan_rcv call return PACKET_REJECT, we shoudn't call ipgre_rcv to process packets again, instead send icmp unreachable message in error path. Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN") Acked-by: William Tu <u9012063(a)gmail.com> Cc: William Tu <u9012063(a)gmail.com> Signed-off-by: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/ip_gre.c | 2 ++ 1 file changed, 2 insertions(+) --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -408,11 +408,13 @@ static int gre_rcv(struct sk_buff *skb) if (unlikely(tpi.proto == htons(ETH_P_ERSPAN))) { if (erspan_rcv(skb, &tpi, hdr_len) == PACKET_RCVD) return 0; + goto out; } if (ipgre_rcv(skb, &tpi, hdr_len) == PACKET_RCVD) return 0; +out: icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0); drop: kfree_skb(skb); Patches currently in stable-queue which might be from yanhaishuang(a)cmss.chinamobile.com are queue-4.15/ip_gre-fix-error-path-when-erspan_rcv-failed.patch queue-4.15/ip_gre-fix-potential-memory-leak-in-erspan_rcv.patch

7 years, 3 months

1
0
0 0

Patch "ip6_vti: adjust vti mtu according to mtu of lower device" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ip6_vti: adjust vti mtu according to mtu of lower device to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ip6_vti-adjust-vti-mtu-according-to-mtu-of-lower-device.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:40 CET 2018 From: Alexey Kodanev <alexey.kodanev(a)oracle.com> Date: Tue, 19 Dec 2017 16:59:21 +0300 Subject: ip6_vti: adjust vti mtu according to mtu of lower device From: Alexey Kodanev <alexey.kodanev(a)oracle.com> [ Upstream commit 53c81e95df1793933f87748d36070a721f6cb287 ] LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over ip6_vti that require fragmentation and the underlying device has an MTU smaller than 1500 plus some extra space for headers. This happens because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating it depending on a destination address or link parameter. Further attempts to send UDP packets may succeed because pmtu gets updated on ICMPV6_PKT_TOOBIG in vti6_err(). In case the lower device has larger MTU size, e.g. 9000, ip6_vti works but not using the possible maximum size, output packets have 1500 limit. The above cases require manual MTU setup after ip6_vti creation. However ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev(). Here is the example when the lower device MTU is set to 9000: # ip a sh ltp_ns_veth2 ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ... inet 10.0.0.2/24 scope global ltp_ns_veth2 inet6 fd00::2/64 scope global # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ... link/tunnel6 fd00::2 peer fd00::1 After the patch: # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ... link/tunnel6 fd00::2 peer fd00::1 Reported-by: Petr Vorel <pvorel(a)suse.cz> Signed-off-by: Alexey Kodanev <alexey.kodanev(a)oracle.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/ip6_vti.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -626,6 +626,7 @@ static void vti6_link_config(struct ip6_ { struct net_device *dev = t->dev; struct __ip6_tnl_parm *p = &t->parms; + struct net_device *tdev = NULL; memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr)); memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr)); @@ -638,6 +639,25 @@ static void vti6_link_config(struct ip6_ dev->flags |= IFF_POINTOPOINT; else dev->flags &= ~IFF_POINTOPOINT; + + if (p->flags & IP6_TNL_F_CAP_XMIT) { + int strict = (ipv6_addr_type(&p->raddr) & + (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL)); + struct rt6_info *rt = rt6_lookup(t->net, + &p->raddr, &p->laddr, + p->link, strict); + + if (rt) + tdev = rt->dst.dev; + ip6_rt_put(rt); + } + + if (!tdev && p->link) + tdev = __dev_get_by_index(t->net, p->link); + + if (tdev) + dev->mtu = max_t(int, tdev->mtu - dev->hard_header_len, + IPV6_MIN_MTU); } /** Patches currently in stable-queue which might be from alexey.kodanev(a)oracle.com are queue-4.15/ip6_vti-adjust-vti-mtu-according-to-mtu-of-lower-device.patch

7 years, 3 months

1
0
0 0

Patch "iommu/vt-d: clean up pr_irq if request_threaded_irq fails" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iommu/vt-d: clean up pr_irq if request_threaded_irq fails to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iommu-vt-d-clean-up-pr_irq-if-request_threaded_irq-fails.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:40 CET 2018 From: Jerry Snitselaar <jsnitsel(a)redhat.com> Date: Wed, 20 Dec 2017 09:48:56 -0700 Subject: iommu/vt-d: clean up pr_irq if request_threaded_irq fails From: Jerry Snitselaar <jsnitsel(a)redhat.com> [ Upstream commit 72d548113881dd32bf7f0b221d031e6586468437 ] It is unlikely request_threaded_irq will fail, but if it does for some reason we should clear iommu->pr_irq in the error path. Also intel_svm_finish_prq shouldn't try to clean up the page request interrupt if pr_irq is 0. Without these, if request_threaded_irq were to fail the following occurs: fail with no fixes: [ 0.683147] ------------[ cut here ]------------ [ 0.683148] NULL pointer, cannot free irq [ 0.683158] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:1632 irq_domain_free_irqs+0x126/0x140 [ 0.683160] Modules linked in: [ 0.683163] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #3 [ 0.683165] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.683168] RIP: 0010:irq_domain_free_irqs+0x126/0x140 [ 0.683169] RSP: 0000:ffffc90000037ce8 EFLAGS: 00010292 [ 0.683171] RAX: 000000000000001d RBX: ffff880276283c00 RCX: ffffffff81c5e5e8 [ 0.683172] RDX: 0000000000000001 RSI: 0000000000000096 RDI: 0000000000000246 [ 0.683174] RBP: ffff880276283c00 R08: 0000000000000000 R09: 000000000000023c [ 0.683175] R10: 0000000000000007 R11: 0000000000000000 R12: 000000000000007a [ 0.683176] R13: 0000000000000001 R14: 0000000000000000 R15: 0000010010000000 [ 0.683178] FS: 0000000000000000(0000) GS:ffff88027ec80000(0000) knlGS:0000000000000000 [ 0.683180] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.683181] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.683182] Call Trace: [ 0.683189] intel_svm_finish_prq+0x3c/0x60 [ 0.683191] free_dmar_iommu+0x1ac/0x1b0 [ 0.683195] init_dmars+0xaaa/0xaea [ 0.683200] ? klist_next+0x19/0xc0 [ 0.683203] ? pci_do_find_bus+0x50/0x50 [ 0.683205] ? pci_get_dev_by_id+0x52/0x70 [ 0.683208] intel_iommu_init+0x498/0x5c7 [ 0.683211] pci_iommu_init+0x13/0x3c [ 0.683214] ? e820__memblock_setup+0x61/0x61 [ 0.683217] do_one_initcall+0x4d/0x1a0 [ 0.683220] kernel_init_freeable+0x186/0x20e [ 0.683222] ? set_debug_rodata+0x11/0x11 [ 0.683225] ? rest_init+0xb0/0xb0 [ 0.683226] kernel_init+0xa/0xff [ 0.683229] ret_from_fork+0x1f/0x30 [ 0.683259] Code: 89 ee 44 89 e7 e8 3b e8 ff ff 5b 5d 44 89 e7 44 89 ee 41 5c 41 5d 41 5e e9 a8 84 ff ff 48 c7 c7 a8 71 a7 81 31 c0 e8 6a d3 f9 ff <0f> ff 5b 5d 41 5c 41 5d 41 5 e c3 0f 1f 44 00 00 66 2e 0f 1f 84 [ 0.683285] ---[ end trace f7650e42792627ca ]--- with iommu->pr_irq = 0, but no check in intel_svm_finish_prq: [ 0.669561] ------------[ cut here ]------------ [ 0.669563] Trying to free already-free IRQ 0 [ 0.669573] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1546 __free_irq+0xa4/0x2c0 [ 0.669574] Modules linked in: [ 0.669577] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #4 [ 0.669579] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.669581] RIP: 0010:__free_irq+0xa4/0x2c0 [ 0.669582] RSP: 0000:ffffc90000037cc0 EFLAGS: 00010082 [ 0.669584] RAX: 0000000000000021 RBX: 0000000000000000 RCX: ffffffff81c5e5e8 [ 0.669585] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046 [ 0.669587] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000023c [ 0.669588] R10: 0000000000000007 R11: 0000000000000000 R12: ffff880276253960 [ 0.669589] R13: ffff8802762538a4 R14: ffff880276253800 R15: ffff880276283600 [ 0.669593] FS: 0000000000000000(0000) GS:ffff88027ed80000(0000) knlGS:0000000000000000 [ 0.669594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.669596] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.669602] Call Trace: [ 0.669616] free_irq+0x30/0x60 [ 0.669620] intel_svm_finish_prq+0x34/0x60 [ 0.669623] free_dmar_iommu+0x1ac/0x1b0 [ 0.669627] init_dmars+0xaaa/0xaea [ 0.669631] ? klist_next+0x19/0xc0 [ 0.669634] ? pci_do_find_bus+0x50/0x50 [ 0.669637] ? pci_get_dev_by_id+0x52/0x70 [ 0.669639] intel_iommu_init+0x498/0x5c7 [ 0.669642] pci_iommu_init+0x13/0x3c [ 0.669645] ? e820__memblock_setup+0x61/0x61 [ 0.669648] do_one_initcall+0x4d/0x1a0 [ 0.669651] kernel_init_freeable+0x186/0x20e [ 0.669653] ? set_debug_rodata+0x11/0x11 [ 0.669656] ? rest_init+0xb0/0xb0 [ 0.669658] kernel_init+0xa/0xff [ 0.669661] ret_from_fork+0x1f/0x30 [ 0.669662] Code: 7a 08 75 0e e9 c3 01 00 00 4c 39 7b 08 74 57 48 89 da 48 8b 5a 18 48 85 db 75 ee 89 ee 48 c7 c7 78 67 a7 81 31 c0 e8 4c 37 fa ff <0f> ff 48 8b 34 24 4c 89 ef e 8 0e 4c 68 00 49 8b 46 40 48 8b 80 [ 0.669688] ---[ end trace 58a470248700f2fc ]--- Cc: Alex Williamson <alex.williamson(a)redhat.com> Cc: Joerg Roedel <joro(a)8bytes.org> Cc: Ashok Raj <ashok.raj(a)intel.com> Signed-off-by: Jerry Snitselaar <jsnitsel(a)redhat.com> Reviewed-by: Ashok Raj <ashok.raj(a)intel.com> Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iommu/intel-svm.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) --- a/drivers/iommu/intel-svm.c +++ b/drivers/iommu/intel-svm.c @@ -129,6 +129,7 @@ int intel_svm_enable_prq(struct intel_io pr_err("IOMMU: %s: Failed to request IRQ for page request queue\n", iommu->name); dmar_free_hwirq(irq); + iommu->pr_irq = 0; goto err; } dmar_writeq(iommu->reg + DMAR_PQH_REG, 0ULL); @@ -144,9 +145,11 @@ int intel_svm_finish_prq(struct intel_io dmar_writeq(iommu->reg + DMAR_PQT_REG, 0ULL); dmar_writeq(iommu->reg + DMAR_PQA_REG, 0ULL); - free_irq(iommu->pr_irq, iommu); - dmar_free_hwirq(iommu->pr_irq); - iommu->pr_irq = 0; + if (iommu->pr_irq) { + free_irq(iommu->pr_irq, iommu); + dmar_free_hwirq(iommu->pr_irq); + iommu->pr_irq = 0; + } free_pages((unsigned long)iommu->prq, PRQ_ORDER); iommu->prq = NULL; Patches currently in stable-queue which might be from jsnitsel(a)redhat.com are queue-4.15/iommu-vt-d-clean-up-pr_irq-if-request_threaded_irq-fails.patch

7 years, 3 months

1
0
0 0

Patch "IB/umem: Fix use of npages/nmap fields" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/umem: Fix use of npages/nmap fields to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-umem-fix-use-of-npages-nmap-fields.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Artemy Kovalyov <artemyko(a)mellanox.com> Date: Tue, 14 Nov 2017 14:51:59 +0200 Subject: IB/umem: Fix use of npages/nmap fields From: Artemy Kovalyov <artemyko(a)mellanox.com> [ Upstream commit edf1a84fe37c51290e2c88154ecaf48dadff3d27 ] In ib_umem structure npages holds original number of sg entries, while nmap is number of DMA blocks returned by dma_map_sg. Fixes: c5d76f130b28 ('IB/core: Add umem function to read data from user-space') Signed-off-by: Artemy Kovalyov <artemyko(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/core/umem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -352,7 +352,7 @@ int ib_umem_copy_from(void *dst, struct return -EINVAL; } - ret = sg_pcopy_to_buffer(umem->sg_head.sgl, umem->nmap, dst, length, + ret = sg_pcopy_to_buffer(umem->sg_head.sgl, umem->npages, dst, length, offset + ib_umem_offset(umem)); if (ret < 0) Patches currently in stable-queue which might be from artemyko(a)mellanox.com are queue-4.15/ib-umem-fix-use-of-npages-nmap-fields.patch

7 years, 3 months

1
0
0 0

Patch "IB/ipoib: Warn when one port fails to initialize" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/ipoib: Warn when one port fails to initialize to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-ipoib-warn-when-one-port-fails-to-initialize.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Yuval Shaia <yuval.shaia(a)oracle.com> Date: Wed, 29 Nov 2017 08:34:02 +0200 Subject: IB/ipoib: Warn when one port fails to initialize From: Yuval Shaia <yuval.shaia(a)oracle.com> [ Upstream commit ac6dbf7fa4707c75a247b540cc0b5c881f3d0ba8 ] If one port fails to initialize an error message should indicate the reason and driver should continue serving the working port(s) and other HCA(s). Fixes: e4b2d06892c7 ("IB/ipoib: Remove device when one port fails to init"). Signed-off-by: Yuval Shaia <yuval.shaia(a)oracle.com> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -2207,8 +2207,10 @@ static struct net_device *ipoib_add_port int result = -ENOMEM; priv = ipoib_intf_alloc(hca, port, format); - if (!priv) + if (!priv) { + pr_warn("%s, %d: ipoib_intf_alloc failed\n", hca->name, port); goto alloc_mem_failed; + } SET_NETDEV_DEV(priv->dev, hca->dev.parent); priv->dev->dev_id = port - 1; @@ -2337,8 +2339,7 @@ static void ipoib_add_one(struct ib_devi } if (!count) { - pr_err("Failed to init port, removing it\n"); - ipoib_remove_one(device, dev_list); + kfree(dev_list); return; } Patches currently in stable-queue which might be from yuval.shaia(a)oracle.com are queue-4.15/ib-ipoib-warn-when-one-port-fails-to-initialize.patch

7 years, 3 months

1
0
0 0

Patch "IB/ipoib: Avoid memory leak if the SA returns a different DGID" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/ipoib: Avoid memory leak if the SA returns a different DGID to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-ipoib-avoid-memory-leak-if-the-sa-returns-a-different-dgid.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Erez Shitrit <erezsh(a)mellanox.com> Date: Tue, 14 Nov 2017 14:51:53 +0200 Subject: IB/ipoib: Avoid memory leak if the SA returns a different DGID From: Erez Shitrit <erezsh(a)mellanox.com> [ Upstream commit 439000892ee17a9c92f1e4297818790ef8bb4ced ] The ipoib path database is organized around DGIDs from the LLADDR, but the SA is free to return a different GID when asked for path. This causes a bug because the SA's modified DGID is copied into the database key, even though it is no longer the correct lookup key, causing a memory leak and other malfunctions. Ensure the database key does not change after the SA query completes. Demonstration of the bug is as follows ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it creates new record in the DB with that gid as a key, and issues a new request to the SM. Now, the SM from some reason returns path-record with other SGID (for example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local subnet prefix) now ipoib will overwrite the current entry with the new one, and if new request to the original GID arrives ipoib will not find it in the DB (was overwritten) and will create new record that in its turn will also be overwritten by the response from the SM, and so on till the driver eats all the device memory. Signed-off-by: Erez Shitrit <erezsh(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -775,6 +775,22 @@ static void path_rec_completion(int stat spin_lock_irqsave(&priv->lock, flags); if (!IS_ERR_OR_NULL(ah)) { + /* + * pathrec.dgid is used as the database key from the LLADDR, + * it must remain unchanged even if the SA returns a different + * GID to use in the AH. + */ + if (memcmp(pathrec->dgid.raw, path->pathrec.dgid.raw, + sizeof(union ib_gid))) { + ipoib_dbg( + priv, + "%s got PathRec for gid %pI6 while asked for %pI6\n", + dev->name, pathrec->dgid.raw, + path->pathrec.dgid.raw); + memcpy(pathrec->dgid.raw, path->pathrec.dgid.raw, + sizeof(union ib_gid)); + } + path->pathrec = *pathrec; old_ah = path->ah; Patches currently in stable-queue which might be from erezsh(a)mellanox.com are queue-4.15/ib-ipoib-avoid-memory-leak-if-the-sa-returns-a-different-dgid.patch

7 years, 3 months

1
0
0 0

Patch "hwrng: core - Clean up RNG list when last hwrng is unregistered" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled hwrng: core - Clean up RNG list when last hwrng is unregistered to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: hwrng-core-clean-up-rng-list-when-last-hwrng-is-unregistered.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:40 CET 2018 From: Gary R Hook <gary.hook(a)amd.com> Date: Fri, 15 Dec 2017 13:55:59 -0600 Subject: hwrng: core - Clean up RNG list when last hwrng is unregistered From: Gary R Hook <gary.hook(a)amd.com> [ Upstream commit 0e4b52942b1c76f89e0dcb829f72e123d0678f54 ] Commit 142a27f0a731 added support for a "best" RNG, and in doing so introduced a hang from rmmod/modprobe -r when the last RNG on the list was unloaded. When the hwrng list is depleted, return the global variables to their original state and decrement all references to the object. Fixes: 142a27f0a731 ("hwrng: core - Reset user selected rng by writing "" to rng_current") Signed-off-by: Gary R Hook <gary.hook(a)amd.com> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar(a)gmail.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/char/hw_random/core.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -306,6 +306,10 @@ static int enable_best_rng(void) ret = ((new_rng == current_rng) ? 0 : set_current_rng(new_rng)); if (!ret) cur_rng_set_by_user = 0; + } else { + drop_current_rng(); + cur_rng_set_by_user = 0; + ret = 0; } return ret; Patches currently in stable-queue which might be from gary.hook(a)amd.com are queue-4.15/hwrng-core-clean-up-rng-list-when-last-hwrng-is-unregistered.patch

7 years, 3 months

1
0
0 0

Patch "hv_netvsc: Fix the TX/RX buffer default sizes" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled hv_netvsc: Fix the TX/RX buffer default sizes to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: hv_netvsc-fix-the-tx-rx-buffer-default-sizes.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:03:39 CET 2018 From: Haiyang Zhang <haiyangz(a)microsoft.com> Date: Mon, 11 Dec 2017 08:56:58 -0800 Subject: hv_netvsc: Fix the TX/RX buffer default sizes From: Haiyang Zhang <haiyangz(a)microsoft.com> [ Upstream commit 41f61db2cd24d5ad802386719cccde1479aa82a6 ] The values were not computed correctly. There are no significant visible impact, though. The intended size of RX buffer is 16 MB, and the default slot size is 1728. So, NETVSC_DEFAULT_RX should be 16*1024*1024 / 1728 = 9709. The intended size of TX buffer is 1 MB, and the slot size is 6144. So, NETVSC_DEFAULT_TX should be 1024*1024 / 6144 = 170. The patch puts the formula directly into the macro, and moves them to hyperv_net.h, together with related macros. Fixes: 5023a6db73196 ("netvsc: increase default receive buffer size") Signed-off-by: Haiyang Zhang <haiyangz(a)microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin(a)microsoft.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/hyperv/hyperv_net.h | 13 ++++++++++++- drivers/net/hyperv/netvsc_drv.c | 4 ---- 2 files changed, 12 insertions(+), 5 deletions(-) --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -638,13 +638,24 @@ struct nvsp_message { /* Max buffer sizes allowed by a host */ #define NETVSC_RECEIVE_BUFFER_SIZE (1024 * 1024 * 31) /* 31MB */ #define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY (1024 * 1024 * 15) /* 15MB */ -#define NETVSC_SEND_BUFFER_SIZE (1024 * 1024 * 15) /* 15MB */ +#define NETVSC_RECEIVE_BUFFER_DEFAULT (1024 * 1024 * 16) + +#define NETVSC_SEND_BUFFER_SIZE (1024 * 1024 * 15) /* 15MB */ +#define NETVSC_SEND_BUFFER_DEFAULT (1024 * 1024) #define NETVSC_INVALID_INDEX -1 #define NETVSC_SEND_SECTION_SIZE 6144 #define NETVSC_RECV_SECTION_SIZE 1728 +/* Default size of TX buf: 1MB, RX buf: 16MB */ +#define NETVSC_MIN_TX_SECTIONS 10 +#define NETVSC_DEFAULT_TX (NETVSC_SEND_BUFFER_DEFAULT \ + / NETVSC_SEND_SECTION_SIZE) +#define NETVSC_MIN_RX_SECTIONS 10 +#define NETVSC_DEFAULT_RX (NETVSC_RECEIVE_BUFFER_DEFAULT \ + / NETVSC_RECV_SECTION_SIZE) + #define NETVSC_RECEIVE_BUFFER_ID 0xcafe #define NETVSC_SEND_BUFFER_ID 0 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -46,10 +46,6 @@ #include "hyperv_net.h" #define RING_SIZE_MIN 64 -#define NETVSC_MIN_TX_SECTIONS 10 -#define NETVSC_DEFAULT_TX 192 /* ~1M */ -#define NETVSC_MIN_RX_SECTIONS 10 /* ~64K */ -#define NETVSC_DEFAULT_RX 10485 /* Max ~16M */ #define LINKCHANGE_INT (2 * HZ) #define VF_TAKEOVER_INT (HZ / 10) Patches currently in stable-queue which might be from haiyangz(a)microsoft.com are queue-4.15/hv_netvsc-fix-the-tx-rx-buffer-default-sizes.patch queue-4.15/hv_netvsc-fix-the-receive-buffer-size-limit.patch

7 years, 3 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror