- Linux-stable-mirror - lists.linaro.org

Patch "video/hdmi: Allow "empty" HDMI infoframes" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled video/hdmi: Allow "empty" HDMI infoframes to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: video-hdmi-allow-empty-hdmi-infoframes.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: "Ville Syrjälä" <ville.syrjala(a)linux.intel.com> Date: Mon, 13 Nov 2017 19:04:18 +0200 Subject: video/hdmi: Allow "empty" HDMI infoframes From: "Ville Syrjälä" <ville.syrjala(a)linux.intel.com> [ Upstream commit 593f4b19a094c4426bd1e1e3cbab87a48bd13c71 ] HDMI 2.0 Appendix F suggest that we should keep sending the infoframe when switching from 3D to 2D mode, even if the infoframe isn't strictly necessary (ie. not needed to transmit the VIC or stereo information). This is a workaround against some sinks that fail to realize that they should switch from 3D to 2D mode when the source stop transmitting the infoframe. v2: Handle unpack() as well Pull the length calculation into a helper Cc: Shashank Sharma <shashank.sharma(a)intel.com> Cc: Andrzej Hajda <a.hajda(a)samsung.com> Cc: Thierry Reding <thierry.reding(a)gmail.com> Cc: Hans Verkuil <hans.verkuil(a)cisco.com> Cc: linux-media(a)vger.kernel.org Reviewed-by: Andrzej Hajda <a.hajda(a)samsung.com> #v1 Signed-off-by: Ville SyrjÃ¤lÃ¤ <ville.syrjala(a)linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-2-ville.s… Reviewed-by: Shashank Sharma <shashank.sharma(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/hdmi.c | 51 +++++++++++++++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 20 deletions(-) --- a/drivers/video/hdmi.c +++ b/drivers/video/hdmi.c @@ -321,6 +321,17 @@ int hdmi_vendor_infoframe_init(struct hd } EXPORT_SYMBOL(hdmi_vendor_infoframe_init); +static int hdmi_vendor_infoframe_length(const struct hdmi_vendor_infoframe *frame) +{ + /* for side by side (half) we also need to provide 3D_Ext_Data */ + if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) + return 6; + else if (frame->vic != 0 || frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID) + return 5; + else + return 4; +} + /** * hdmi_vendor_infoframe_pack() - write a HDMI vendor infoframe to binary buffer * @frame: HDMI infoframe @@ -341,19 +352,11 @@ ssize_t hdmi_vendor_infoframe_pack(struc u8 *ptr = buffer; size_t length; - /* empty info frame */ - if (frame->vic == 0 && frame->s3d_struct == HDMI_3D_STRUCTURE_INVALID) - return -EINVAL; - /* only one of those can be supplied */ if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID) return -EINVAL; - /* for side by side (half) we also need to provide 3D_Ext_Data */ - if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) - frame->length = 6; - else - frame->length = 5; + frame->length = hdmi_vendor_infoframe_length(frame); length = HDMI_INFOFRAME_HEADER_SIZE + frame->length; @@ -372,14 +375,16 @@ ssize_t hdmi_vendor_infoframe_pack(struc ptr[5] = 0x0c; ptr[6] = 0x00; - if (frame->vic) { - ptr[7] = 0x1 << 5; /* video format */ - ptr[8] = frame->vic; - } else { + if (frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID) { ptr[7] = 0x2 << 5; /* video format */ ptr[8] = (frame->s3d_struct & 0xf) << 4; if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) ptr[9] = (frame->s3d_ext_data & 0xf) << 4; + } else if (frame->vic) { + ptr[7] = 0x1 << 5; /* video format */ + ptr[8] = frame->vic; + } else { + ptr[7] = 0x0 << 5; /* video format */ } hdmi_infoframe_set_checksum(buffer, length); @@ -1161,7 +1166,7 @@ hdmi_vendor_any_infoframe_unpack(union h if (ptr[0] != HDMI_INFOFRAME_TYPE_VENDOR || ptr[1] != 1 || - (ptr[2] != 5 && ptr[2] != 6)) + (ptr[2] != 4 && ptr[2] != 5 && ptr[2] != 6)) return -EINVAL; length = ptr[2]; @@ -1189,16 +1194,22 @@ hdmi_vendor_any_infoframe_unpack(union h hvf->length = length; - if (hdmi_video_format == 0x1) { - hvf->vic = ptr[4]; - } else if (hdmi_video_format == 0x2) { + if (hdmi_video_format == 0x2) { + if (length != 5 && length != 6) + return -EINVAL; hvf->s3d_struct = ptr[4] >> 4; if (hvf->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) { - if (length == 6) - hvf->s3d_ext_data = ptr[5] >> 4; - else + if (length != 6) return -EINVAL; + hvf->s3d_ext_data = ptr[5] >> 4; } + } else if (hdmi_video_format == 0x1) { + if (length != 5) + return -EINVAL; + hvf->vic = ptr[4]; + } else { + if (length != 4) + return -EINVAL; } return 0; Patches currently in stable-queue which might be from ville.syrjala(a)linux.intel.com are queue-4.4/drm-defer-disabling-the-vblank-irq-until-the-next-interrupt-for-instant-off.patch queue-4.4/video-hdmi-allow-empty-hdmi-infoframes.patch queue-4.4/drm-edid-set-eld-connector-type-in-drm_edid_to_eld.patch

7 years, 3 months

1
0
0 0

Patch "video: ARM CLCD: fix dma allocation size" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled video: ARM CLCD: fix dma allocation size to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: video-arm-clcd-fix-dma-allocation-size.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Liam Beguin <lbeguin(a)tycoint.com> Date: Fri, 7 Apr 2017 17:03:24 +0200 Subject: video: ARM CLCD: fix dma allocation size From: Liam Beguin <lbeguin(a)tycoint.com> [ Upstream commit 9a1c779e6b06855e41099caa6f15b3b584dfa88c ] This patch forces the frambuffer size to be aligned on kernel pages. During the board startup, the splash screed did appear; the "ts_test" program or our application were not able to start. The following error message was reported: error: failed to map framebuffer device to memory. LinuxFB: driver cannot connect The issue was discovered, on the LPC32xx platform, during the migration of the LCD definition from the board file to the device tree. Signed-off-by: Liam Beguin <lbeguin(a)tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux(a)tycoint.com> Cc: Vladimir Zapolskiy <vz(a)mleia.com> Cc: Russell King <linux(a)armlinux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/amba-clcd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/video/fbdev/amba-clcd.c +++ b/drivers/video/fbdev/amba-clcd.c @@ -759,8 +759,8 @@ static int clcdfb_of_dma_setup(struct cl if (err) return err; - framesize = fb->panel->mode.xres * fb->panel->mode.yres * - fb->panel->bpp / 8; + framesize = PAGE_ALIGN(fb->panel->mode.xres * fb->panel->mode.yres * + fb->panel->bpp / 8); fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize, &dma, GFP_KERNEL); if (!fb->fb.screen_base) Patches currently in stable-queue which might be from lbeguin(a)tycoint.com are queue-4.4/video-arm-clcd-fix-dma-allocation-size.patch

7 years, 3 months

1
0
0 0

Patch "veth: set peer GSO values" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled veth: set peer GSO values to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: veth-set-peer-gso-values.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Stephen Hemminger <stephen(a)networkplumber.org> Date: Thu, 7 Dec 2017 15:40:20 -0800 Subject: veth: set peer GSO values From: Stephen Hemminger <stephen(a)networkplumber.org> [ Upstream commit 72d24955b44a4039db54a1c252b5031969eeaac3 ] When new veth is created, and GSO values have been configured on one device, clone those values to the peer. For example: # ip link add dev vm1 gso_max_size 65530 type veth peer name vm2 This should create vm1 <--> vm2 with both having GSO maximum size set to 65530. Signed-off-by: Stephen Hemminger <sthemmin(a)microsoft.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/veth.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -399,6 +399,9 @@ static int veth_newlink(struct net *src_ if (ifmp && (dev->ifindex != 0)) peer->ifindex = ifmp->ifi_index; + peer->gso_max_size = dev->gso_max_size; + peer->gso_max_segs = dev->gso_max_segs; + err = register_netdevice(peer); put_net(net); net = NULL; Patches currently in stable-queue which might be from stephen(a)networkplumber.org are queue-4.4/veth-set-peer-gso-values.patch

7 years, 3 months

1
0
0 0

Patch "usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in dummy_hub_control()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in dummy_hub_control() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-gadget-dummy_hcd-fix-wrong-power-status-bit-clear-reset-in-dummy_hub_control.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Yuyang Du <yuyang.du(a)intel.com> Date: Fri, 24 Mar 2017 04:06:11 +0800 Subject: usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in dummy_hub_control() From: Yuyang Du <yuyang.du(a)intel.com> [ Upstream commit 9f20dfb44d03745d0d3cef2ffb3abf8d8024fa61 ] This fixes the commit: 1cd8fd2887e1 ("usb: gadget: dummy_hcd: add SuperSpeed support"). In the case of ClearPortFeature and USB_PORT_FEAT_POWER, simply clear the right bit regardless of what the wValue is. Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Signed-off-by: Yuyang Du <yuyang.du(a)intel.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/gadget/udc/dummy_hcd.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -2105,16 +2105,13 @@ static int dummy_hub_control( } break; case USB_PORT_FEAT_POWER: - if (hcd->speed == HCD_USB3) { - if (dum_hcd->port_status & USB_PORT_STAT_POWER) - dev_dbg(dummy_dev(dum_hcd), - "power-off\n"); - } else - if (dum_hcd->port_status & - USB_SS_PORT_STAT_POWER) - dev_dbg(dummy_dev(dum_hcd), - "power-off\n"); - /* FALLS THROUGH */ + dev_dbg(dummy_dev(dum_hcd), "power-off\n"); + if (hcd->speed == HCD_USB3) + dum_hcd->port_status &= ~USB_SS_PORT_STAT_POWER; + else + dum_hcd->port_status &= ~USB_PORT_STAT_POWER; + set_link_state(dum_hcd); + break; default: dum_hcd->port_status &= ~(1 << wValue); set_link_state(dum_hcd); @@ -2285,14 +2282,13 @@ static int dummy_hub_control( if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) != 0) { dum_hcd->port_status |= (1 << wValue); - set_link_state(dum_hcd); } } else if ((dum_hcd->port_status & USB_PORT_STAT_POWER) != 0) { dum_hcd->port_status |= (1 << wValue); - set_link_state(dum_hcd); } + set_link_state(dum_hcd); } break; case GetPortErrorCount: Patches currently in stable-queue which might be from yuyang.du(a)intel.com are queue-4.4/usb-gadget-dummy_hcd-fix-wrong-power-status-bit-clear-reset-in-dummy_hub_control.patch

7 years, 3 months

1
0
0 0

Patch "usb: dwc2: Make sure we disconnect the gadget state" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc2: Make sure we disconnect the gadget state to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-dwc2-make-sure-we-disconnect-the-gadget-state.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: John Stultz <john.stultz(a)linaro.org> Date: Mon, 13 Feb 2017 20:08:08 -0800 Subject: usb: dwc2: Make sure we disconnect the gadget state From: John Stultz <john.stultz(a)linaro.org> [ Upstream commit dad3f793f20fbb5c0c342f0f5a0bdf69a4d76089 ] I had seen some odd behavior with HiKey's usb-gadget interface that I finally seemed to have chased down. Basically every other time I plugged in the OTG port, the gadget interface would properly initialize. The other times, I'd get a big WARN_ON in dwc2_hsotg_init_fifo() about the fifo_map not being clear. Ends up if we don't disconnect the gadget state, the fifo-map doesn't get cleared properly, which causes WARN_ON messages and also results in the device not properly being setup as a gadget every other time the OTG port is connected. So this patch adds a call to dwc2_hsotg_disconnect() in the reset path so the state is properly cleared. With it, the gadget interface initializes properly on every plug in. Cc: Wei Xu <xuwei5(a)hisilicon.com> Cc: Guodong Xu <guodong.xu(a)linaro.org> Cc: Amit Pundir <amit.pundir(a)linaro.org> Cc: Rob Herring <robh+dt(a)kernel.org> Cc: John Youn <johnyoun(a)synopsys.com> Cc: Douglas Anderson <dianders(a)chromium.org> Cc: Chen Yu <chenyu56(a)huawei.com> Cc: Felipe Balbi <felipe.balbi(a)linux.intel.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: linux-usb(a)vger.kernel.org Acked-by: John Youn <johnyoun(a)synopsys.com> Signed-off-by: John Stultz <john.stultz(a)linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc2/hcd.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -1385,6 +1385,7 @@ static void dwc2_conn_id_status_change(s dwc2_core_init(hsotg, false, -1); dwc2_enable_global_interrupts(hsotg); spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hsotg_disconnect(hsotg); dwc2_hsotg_core_init_disconnected(hsotg, false); spin_unlock_irqrestore(&hsotg->lock, flags); dwc2_hsotg_core_connect(hsotg); Patches currently in stable-queue which might be from john.stultz(a)linaro.org are queue-4.4/usb-dwc2-make-sure-we-disconnect-the-gadget-state.patch queue-4.4/sysrq-reset-the-watchdog-timers-while-displaying-high-resolution-timers.patch queue-4.4/timers-sched_clock-update-timeout-for-clock-wrap.patch

7 years, 3 months

1
0
0 0

Patch "timers, sched_clock: Update timeout for clock wrap" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled timers, sched_clock: Update timeout for clock wrap to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: timers-sched_clock-update-timeout-for-clock-wrap.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: David Engraf <david.engraf(a)sysgo.com> Date: Fri, 17 Feb 2017 08:51:03 +0100 Subject: timers, sched_clock: Update timeout for clock wrap From: David Engraf <david.engraf(a)sysgo.com> [ Upstream commit 1b8955bc5ac575009835e371ae55e7f3af2197a9 ] The scheduler clock framework may not use the correct timeout for the clock wrap. This happens when a new clock driver calls sched_clock_register() after the kernel called sched_clock_postinit(). In this case the clock wrap timeout is too long thus sched_clock_poll() is called too late and the clock already wrapped. On my ARM system the scheduler was no longer scheduling any other task than the idle task because the sched_clock() wrapped. Signed-off-by: David Engraf <david.engraf(a)sysgo.com> Signed-off-by: John Stultz <john.stultz(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/time/sched_clock.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/kernel/time/sched_clock.c +++ b/kernel/time/sched_clock.c @@ -205,6 +205,11 @@ sched_clock_register(u64 (*read)(void), update_clock_read_data(&rd); + if (sched_clock_timer.function != NULL) { + /* update timeout for clock wrap */ + hrtimer_start(&sched_clock_timer, cd.wrap_kt, HRTIMER_MODE_REL); + } + r = rate; if (r >= 4000000) { r /= 1000000; Patches currently in stable-queue which might be from david.engraf(a)sysgo.com are queue-4.4/timers-sched_clock-update-timeout-for-clock-wrap.patch

7 years, 3 months

1
0
0 0

Patch "tools/usbip: fixes build with musl libc toolchain" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tools/usbip: fixes build with musl libc toolchain to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tools-usbip-fixes-build-with-musl-libc-toolchain.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Julien BOIBESSOT <julien.boibessot(a)armadeus.com> Date: Tue, 5 Dec 2017 18:48:14 +0100 Subject: tools/usbip: fixes build with musl libc toolchain From: Julien BOIBESSOT <julien.boibessot(a)armadeus.com> [ Upstream commit 77be4c878c72e411ad22af96b6f81dd45c26450a ] Indeed musl doesn't define old SIGCLD signal name but only new one SIGCHLD. SIGCHLD is the new POSIX name for that signal so it doesn't change anything on other libcs. This fixes this kind of build error: usbipd.c: In function ‘set_signal’: usbipd.c:459:12: error: 'SIGCLD' undeclared (first use in this function) sigaction(SIGCLD, &act, NULL); ^~~~~~ usbipd.c:459:12: note: each undeclared identifier is reported only once for each function it appears in Makefile:407: recipe for target 'usbipd.o' failed make[3]: *** [usbipd.o] Error 1 Signed-off-by: Julien BOIBESSOT <julien.boibessot(a)armadeus.com> Acked-by: Shuah Khan <shuahkh(a)osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/usb/usbip/src/usbipd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/tools/usb/usbip/src/usbipd.c +++ b/tools/usb/usbip/src/usbipd.c @@ -451,7 +451,7 @@ static void set_signal(void) sigaction(SIGTERM, &act, NULL); sigaction(SIGINT, &act, NULL); act.sa_handler = SIG_IGN; - sigaction(SIGCLD, &act, NULL); + sigaction(SIGCHLD, &act, NULL); } static const char *pid_file; Patches currently in stable-queue which might be from julien.boibessot(a)armadeus.com are queue-4.4/tools-usbip-fixes-build-with-musl-libc-toolchain.patch

7 years, 3 months

1
0
0 0

Patch "test_firmware: fix setting old custom fw path back on exit" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled test_firmware: fix setting old custom fw path back on exit to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: test_firmware-fix-setting-old-custom-fw-path-back-on-exit.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: "Luis R. Rodriguez" <mcgrof(a)kernel.org> Date: Mon, 20 Nov 2017 09:45:35 -0800 Subject: test_firmware: fix setting old custom fw path back on exit From: "Luis R. Rodriguez" <mcgrof(a)kernel.org> [ Upstream commit 65c79230576873b312c3599479c1e42355c9f349 ] The file /sys/module/firmware_class/parameters/path can be used to set a custom firmware path. The fw_filesystem.sh script creates a temporary directory to add a test firmware file to be used during testing, in order for this to work it uses the custom path syfs file and it was supposed to reset back the file on execution exit. The script failed to do this due to a typo, it was using OLD_PATH instead of OLD_FWPATH, since its inception since v3.17. Its not as easy to just keep the old setting, it turns out that resetting an empty setting won't actually do what we want, we need to check if it was empty and set an empty space. Without this we end up having the temporary path always set after we run these tests. Fixes: 0a8adf58475 ("test: add firmware_class loader test") Signed-off-by: Luis R. Rodriguez <mcgrof(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/firmware/fw_filesystem.sh | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/tools/testing/selftests/firmware/fw_filesystem.sh +++ b/tools/testing/selftests/firmware/fw_filesystem.sh @@ -28,7 +28,10 @@ test_finish() if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout fi - echo -n "$OLD_PATH" >/sys/module/firmware_class/parameters/path + if [ "$OLD_FWPATH" = "" ]; then + OLD_FWPATH=" " + fi + echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path rm -f "$FW" rmdir "$FWPATH" } Patches currently in stable-queue which might be from mcgrof(a)kernel.org are queue-4.4/test_firmware-fix-setting-old-custom-fw-path-back-on-exit.patch

7 years, 3 months

1
0
0 0

Patch "sysrq: Reset the watchdog timers while displaying high-resolution timers" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sysrq: Reset the watchdog timers while displaying high-resolution timers to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sysrq-reset-the-watchdog-timers-while-displaying-high-resolution-timers.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Tom Hromatka <tom.hromatka(a)oracle.com> Date: Wed, 4 Jan 2017 15:28:04 -0700 Subject: sysrq: Reset the watchdog timers while displaying high-resolution timers From: Tom Hromatka <tom.hromatka(a)oracle.com> [ Upstream commit 0107042768658fea9f5f5a9c00b1c90f5dab6a06 ] On systems with a large number of CPUs, running sysrq-<q> can cause watchdog timeouts. There are two slow sections of code in the sysrq-<q> path in timer_list.c. 1. print_active_timers() - This function is called by print_cpu() and contains a slow goto loop. On a machine with hundreds of CPUs, this loop took approximately 100ms for the first CPU in a NUMA node. (Subsequent CPUs in the same node ran much quicker.) The total time to print all of the CPUs is ultimately long enough to trigger the soft lockup watchdog. 2. print_tickdevice() - This function outputs a large amount of textual information. This function also took approximately 100ms per CPU. Since sysrq-<q> is not a performance critical path, there should be no harm in touching the nmi watchdog in both slow sections above. Touching it in just one location was insufficient on systems with hundreds of CPUs as occasional timeouts were still observed during testing. This issue was observed on an Oracle T7 machine with 128 CPUs, but I anticipate it may affect other systems with similarly large numbers of CPUs. Signed-off-by: Tom Hromatka <tom.hromatka(a)oracle.com> Reviewed-by: Rob Gardner <rob.gardner(a)oracle.com> Signed-off-by: John Stultz <john.stultz(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/time/timer_list.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/kernel/time/timer_list.c +++ b/kernel/time/timer_list.c @@ -16,6 +16,7 @@ #include <linux/sched.h> #include <linux/seq_file.h> #include <linux/kallsyms.h> +#include <linux/nmi.h> #include <asm/uaccess.h> @@ -96,6 +97,9 @@ print_active_timers(struct seq_file *m, next_one: i = 0; + + touch_nmi_watchdog(); + raw_spin_lock_irqsave(&base->cpu_base->lock, flags); curr = timerqueue_getnext(&base->active); @@ -207,6 +211,8 @@ print_tickdevice(struct seq_file *m, str { struct clock_event_device *dev = td->evtdev; + touch_nmi_watchdog(); + SEQ_printf(m, "Tick Device: mode: %d\n", td->mode); if (cpu < 0) SEQ_printf(m, "Broadcast device\n"); Patches currently in stable-queue which might be from tom.hromatka(a)oracle.com are queue-4.4/sysrq-reset-the-watchdog-timers-while-displaying-high-resolution-timers.patch

7 years, 3 months

1
0
0 0

Patch "tcp: sysctl: Fix a race to avoid unexpected 0 window from space" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tcp: sysctl: Fix a race to avoid unexpected 0 window from space to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tcp-sysctl-fix-a-race-to-avoid-unexpected-0-window-from-space.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Gao Feng <fgao(a)ikuai8.com> Date: Fri, 24 Mar 2017 07:05:12 +0800 Subject: tcp: sysctl: Fix a race to avoid unexpected 0 window from space From: Gao Feng <fgao(a)ikuai8.com> [ Upstream commit c48367427a39ea0b85c7cf018fe4256627abfd9e ] Because sysctl_tcp_adv_win_scale could be changed any time, so there is one race in tcp_win_from_space. For example, 1.sysctl_tcp_adv_win_scale<=0 (sysctl_tcp_adv_win_scale is negative now) 2.space>>(-sysctl_tcp_adv_win_scale) (sysctl_tcp_adv_win_scale is postive now) As a result, tcp_win_from_space returns 0. It is unexpected. Certainly if the compiler put the sysctl_tcp_adv_win_scale into one register firstly, then use the register directly, it would be ok. But we could not depend on the compiler behavior. Signed-off-by: Gao Feng <fgao(a)ikuai8.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/net/tcp.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -1199,9 +1199,11 @@ void tcp_select_initial_window(int __spa static inline int tcp_win_from_space(int space) { - return sysctl_tcp_adv_win_scale<=0 ? - (space>>(-sysctl_tcp_adv_win_scale)) : - space - (space>>sysctl_tcp_adv_win_scale); + int tcp_adv_win_scale = sysctl_tcp_adv_win_scale; + + return tcp_adv_win_scale <= 0 ? + (space>>(-tcp_adv_win_scale)) : + space - (space>>tcp_adv_win_scale); } /* Note: caller must be prepared to deal with negative returns */ Patches currently in stable-queue which might be from fgao(a)ikuai8.com are queue-4.4/tcp-sysctl-fix-a-race-to-avoid-unexpected-0-window-from-space.patch

7 years, 3 months

1
0
0 0

Patch "staging: wilc1000: add check for kmalloc allocation failure." has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: wilc1000: add check for kmalloc allocation failure. to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: staging-wilc1000-add-check-for-kmalloc-allocation-failure.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Colin Ian King <colin.king(a)canonical.com> Date: Tue, 28 Feb 2017 11:47:33 +0000 Subject: staging: wilc1000: add check for kmalloc allocation failure. From: Colin Ian King <colin.king(a)canonical.com> [ Upstream commit 6cc0c259d034c6ab48f4e12f505213988e73d380 ] Add a sanity check that wid.val has been allocated, fixes a null pointer deference on stamac when calling ether_add_copy. Detected by CoverityScan, CID#1369537 ("Dereference null return value") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/wilc1000/host_interface.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/staging/wilc1000/host_interface.c +++ b/drivers/staging/wilc1000/host_interface.c @@ -2179,6 +2179,8 @@ static s32 Handle_Get_InActiveTime(struc wid.type = WID_STR; wid.size = ETH_ALEN; wid.val = kmalloc(wid.size, GFP_KERNEL); + if (!wid.val) + return -ENOMEM; stamac = wid.val; memcpy(stamac, strHostIfStaInactiveT->mac, ETH_ALEN); Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.4/staging-wilc1000-add-check-for-kmalloc-allocation-failure.patch

7 years, 3 months

1
0
0 0

Patch "spi: sun6i: disable/unprepare clocks on remove" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled spi: sun6i: disable/unprepare clocks on remove to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: spi-sun6i-disable-unprepare-clocks-on-remove.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Tobias Jordan <Tobias.Jordan(a)elektrobit.com> Date: Thu, 7 Dec 2017 15:04:53 +0100 Subject: spi: sun6i: disable/unprepare clocks on remove From: Tobias Jordan <Tobias.Jordan(a)elektrobit.com> [ Upstream commit 2d9bbd02c54094ceffa555143b0d68cd06504d63 ] sun6i_spi_probe() uses sun6i_spi_runtime_resume() to prepare/enable clocks, so sun6i_spi_remove() should use sun6i_spi_runtime_suspend() to disable/unprepare them if we're not suspended. Replacing pm_runtime_disable() by pm_runtime_force_suspend() will ensure that sun6i_spi_runtime_suspend() is called if needed. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 3558fe900e8af (spi: sunxi: Add Allwinner A31 SPI controller driver) Signed-off-by: Tobias Jordan <Tobias.Jordan(a)elektrobit.com> Acked-by: Maxime Ripard <maxime.ripard(a)free-electrons.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/spi/spi-sun6i.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -457,7 +457,7 @@ err_free_master: static int sun6i_spi_remove(struct platform_device *pdev) { - pm_runtime_disable(&pdev->dev); + pm_runtime_force_suspend(&pdev->dev); return 0; } Patches currently in stable-queue which might be from Tobias.Jordan(a)elektrobit.com are queue-4.4/spi-sun6i-disable-unprepare-clocks-on-remove.patch

7 years, 3 months

1
0
0 0

Patch "staging: speakup: Replace BUG_ON() with WARN_ON()." has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: speakup: Replace BUG_ON() with WARN_ON(). to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: staging-speakup-replace-bug_on-with-warn_on.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:11 CET 2018 From: Varsha Rao <rvarsha016(a)gmail.com> Date: Sat, 25 Feb 2017 17:53:58 +0530 Subject: staging: speakup: Replace BUG_ON() with WARN_ON(). From: Varsha Rao <rvarsha016(a)gmail.com> [ Upstream commit d351c2db5420bb17dcd2d9aac7ddb5f64c6d04b3 ] BUG_ON() is replaced with WARN_ON() and EINVAL is returned, when WARN_ON() is true. This fixes the following checkpatch issue: Avoid crashing the kernel - try using WARN_ON & recovery code rather than BUG() or BUG_ON(). Signed-off-by: Varsha Rao <rvarsha016(a)gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault(a)ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/speakup/kobjects.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/drivers/staging/speakup/kobjects.c +++ b/drivers/staging/speakup/kobjects.c @@ -831,7 +831,9 @@ static ssize_t message_show(struct kobje struct msg_group_t *group = spk_find_msg_group(attr->attr.name); unsigned long flags; - BUG_ON(!group); + if (WARN_ON(!group)) + return -EINVAL; + spin_lock_irqsave(&speakup_info.spinlock, flags); retval = message_show_helper(buf, group->start, group->end); spin_unlock_irqrestore(&speakup_info.spinlock, flags); @@ -843,7 +845,9 @@ static ssize_t message_store(struct kobj { struct msg_group_t *group = spk_find_msg_group(attr->attr.name); - BUG_ON(!group); + if (WARN_ON(!group)) + return -EINVAL; + return message_store_helper(buf, count, group); } Patches currently in stable-queue which might be from rvarsha016(a)gmail.com are queue-4.4/staging-speakup-replace-bug_on-with-warn_on.patch

7 years, 3 months

1
0
0 0

Patch "[media] solo6x10: release vb2 buffers in solo_stop_streaming()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled [media] solo6x10: release vb2 buffers in solo_stop_streaming() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: solo6x10-release-vb2-buffers-in-solo_stop_streaming.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Anton Sviridenko <anton(a)corp.bluecherry.net> Date: Thu, 9 Mar 2017 10:46:18 -0300 Subject: [media] solo6x10: release vb2 buffers in solo_stop_streaming() From: Anton Sviridenko <anton(a)corp.bluecherry.net> [ Upstream commit 6e4c8480bd2eb95309ad3c875e11d2cad98f9188 ] Fixes warning that appears in dmesg after closing V4L2 userspace application that plays video from the display device (first device from V4L2 device nodes provided by solo, usually /dev/video0 when no other V4L2 devices are present). Encoder device nodes are not affected. Can be reproduced by starting and closing ffplay -f video4linux2 /dev/video0 [ 8130.281251] ------------[ cut here ]------------ [ 8130.281256] WARNING: CPU: 1 PID: 20414 at drivers/media/v4l2-core/videobuf2-core.c:1651 __vb2_queue_cancel+0x14b/0x230 [ 8130.281257] Modules linked in: ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat solo6x10 x86_pkg_temp_thermal vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) [ 8130.281264] CPU: 1 PID: 20414 Comm: ffplay Tainted: G O 4.10.0-gentoo #1 [ 8130.281264] Hardware name: ASUS All Series/B85M-E, BIOS 2301 03/30/2015 [ 8130.281265] Call Trace: [ 8130.281267] dump_stack+0x4f/0x72 [ 8130.281270] __warn+0xc7/0xf0 [ 8130.281271] warn_slowpath_null+0x18/0x20 [ 8130.281272] __vb2_queue_cancel+0x14b/0x230 [ 8130.281273] vb2_core_streamoff+0x23/0x90 [ 8130.281275] vb2_streamoff+0x24/0x50 [ 8130.281276] vb2_ioctl_streamoff+0x3d/0x50 [ 8130.281278] v4l_streamoff+0x15/0x20 [ 8130.281279] __video_do_ioctl+0x25e/0x2f0 [ 8130.281280] video_usercopy+0x279/0x520 [ 8130.281282] ? v4l_enum_fmt+0x1330/0x1330 [ 8130.281285] ? unmap_region+0xdf/0x110 [ 8130.281285] video_ioctl2+0x10/0x20 [ 8130.281286] v4l2_ioctl+0xce/0xe0 [ 8130.281289] do_vfs_ioctl+0x8b/0x5b0 [ 8130.281290] ? __fget+0x72/0xa0 [ 8130.281291] SyS_ioctl+0x74/0x80 [ 8130.281294] entry_SYSCALL_64_fastpath+0x13/0x94 [ 8130.281295] RIP: 0033:0x7ff86fee6b27 [ 8130.281296] RSP: 002b:00007ffe467f6a08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 8130.281297] RAX: ffffffffffffffda RBX: 00000000d1a4d788 RCX: 00007ff86fee6b27 [ 8130.281297] RDX: 00007ffe467f6a14 RSI: 0000000040045613 RDI: 0000000000000006 [ 8130.281298] RBP: 000000000373f8d0 R08: 00000000ffffffff R09: 00007ff860001140 [ 8130.281298] R10: 0000000000000243 R11: 0000000000000246 R12: 0000000000000000 [ 8130.281299] R13: 00000000000000a0 R14: 00007ffe467f6530 R15: 0000000001f32228 [ 8130.281300] ---[ end trace 00695dc96be646e7 ]--- Signed-off-by: Anton Sviridenko <anton(a)corp.bluecherry.net> Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/pci/solo6x10/solo6x10-v4l2.c | 11 +++++++++++ 1 file changed, 11 insertions(+) --- a/drivers/media/pci/solo6x10/solo6x10-v4l2.c +++ b/drivers/media/pci/solo6x10/solo6x10-v4l2.c @@ -342,6 +342,17 @@ static void solo_stop_streaming(struct v struct solo_dev *solo_dev = vb2_get_drv_priv(q); solo_stop_thread(solo_dev); + + spin_lock(&solo_dev->slock); + while (!list_empty(&solo_dev->vidq_active)) { + struct solo_vb2_buf *buf = list_entry( + solo_dev->vidq_active.next, + struct solo_vb2_buf, list); + + list_del(&buf->list); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + } + spin_unlock(&solo_dev->slock); INIT_LIST_HEAD(&solo_dev->vidq_active); } Patches currently in stable-queue which might be from anton(a)corp.bluecherry.net are queue-4.4/solo6x10-release-vb2-buffers-in-solo_stop_streaming.patch

7 years, 3 months

1
0
0 0

Patch "spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: spi-omap2-mcspi-poll-omap2_mcspi_chstat_rxs-for-pio-transfer.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Akinobu Mita <akinobu.mita(a)gmail.com> Date: Wed, 22 Mar 2017 09:18:26 +0900 Subject: spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer From: Akinobu Mita <akinobu.mita(a)gmail.com> [ Upstream commit 812613591cb652344186c4cd912304ed02138566 ] When running the spi-loopback-test with slower clock rate like 10 KHz, the test for 251 bytes transfer was failed. This failure triggered an spi-omap2-mcspi's error message "DMA RX last word empty". This message means that PIO for reading the remaining bytes due to the DMA transfer length reduction is failed. This problem can be fixed by polling OMAP2_MCSPI_CHSTAT_RXS bit in channel status register to wait until the receive buffer register is filled. Cc: Mark Brown <broonie(a)kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita(a)gmail.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/spi/spi-omap2-mcspi.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -457,6 +457,8 @@ omap2_mcspi_rx_dma(struct spi_device *sp int elements = 0; int word_len, element_count; struct omap2_mcspi_cs *cs = spi->controller_state; + void __iomem *chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; + mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; count = xfer->len; @@ -517,8 +519,8 @@ omap2_mcspi_rx_dma(struct spi_device *sp if (l & OMAP2_MCSPI_CHCONF_TURBO) { elements--; - if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) - & OMAP2_MCSPI_CHSTAT_RXS)) { + if (!mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_RXS)) { u32 w; w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0); @@ -536,8 +538,7 @@ omap2_mcspi_rx_dma(struct spi_device *sp return count; } } - if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) - & OMAP2_MCSPI_CHSTAT_RXS)) { + if (!mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS)) { u32 w; w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0); Patches currently in stable-queue which might be from akinobu.mita(a)gmail.com are queue-4.4/spi-omap2-mcspi-poll-omap2_mcspi_chstat_rxs-for-pio-transfer.patch

7 years, 3 months

1
0
0 0

Patch "selinux: check for address length in selinux_socket_bind()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selinux: check for address length in selinux_socket_bind() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selinux-check-for-address-length-in-selinux_socket_bind.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Alexander Potapenko <glider(a)google.com> Date: Mon, 6 Mar 2017 19:46:14 +0100 Subject: selinux: check for address length in selinux_socket_bind() From: Alexander Potapenko <glider(a)google.com> [ Upstream commit e2f586bd83177d22072b275edd4b8b872daba924 ] KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of uninitialized memory in selinux_socket_bind(): ================================================================== BUG: KMSAN: use of unitialized memory inter: 0 CPU: 3 PID: 1074 Comm: packet2 Tainted: G B 4.8.0-rc6+ #1916 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000000 ffff8800882ffb08 ffffffff825759c8 ffff8800882ffa48 ffffffff818bf551 ffffffff85bab870 0000000000000092 ffffffff85bab550 0000000000000000 0000000000000092 00000000bb0009bb 0000000000000002 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff825759c8>] dump_stack+0x238/0x290 lib/dump_stack.c:51 [<ffffffff818bdee6>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1008 [<ffffffff818bf0fb>] __msan_warning+0x5b/0xb0 mm/kmsan/kmsan_instr.c:424 [<ffffffff822dae71>] selinux_socket_bind+0xf41/0x1080 security/selinux/hooks.c:4288 [<ffffffff8229357c>] security_socket_bind+0x1ec/0x240 security/security.c:1240 [<ffffffff84265d98>] SYSC_bind+0x358/0x5f0 net/socket.c:1366 [<ffffffff84265a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff81005678>] do_syscall_64+0x58/0x70 arch/x86/entry/common.c:292 [<ffffffff8518217c>] entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.o:? chained origin: 00000000ba6009bb [<ffffffff810bb7a7>] save_stack_trace+0x27/0x50 arch/x86/kernel/stacktrace.c:67 [< inline >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322 [< inline >] kmsan_save_stack mm/kmsan/kmsan.c:337 [<ffffffff818bd2b8>] kmsan_internal_chain_origin+0x118/0x1e0 mm/kmsan/kmsan.c:530 [<ffffffff818bf033>] __msan_set_alloca_origin4+0xc3/0x130 mm/kmsan/kmsan_instr.c:380 [<ffffffff84265b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356 [<ffffffff84265a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff81005678>] do_syscall_64+0x58/0x70 arch/x86/entry/common.c:292 [<ffffffff8518217c>] return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.o:? origin description: ----address@SYSC_bind (origin=00000000b8c00900) ================================================================== (the line numbers are relative to 4.8-rc6, but the bug persists upstream) , when I run the following program as root: ======================================================= #include <string.h> #include <sys/socket.h> #include <netinet/in.h> int main(int argc, char *argv[]) { struct sockaddr addr; int size = 0; if (argc > 1) { size = atoi(argv[1]); } memset(&addr, 0, sizeof(addr)); int fd = socket(PF_INET6, SOCK_DGRAM, IPPROTO_IP); bind(fd, &addr, size); return 0; } ======================================================= (for different values of |size| other error reports are printed). This happens because bind() unconditionally copies |size| bytes of |addr| to the kernel, leaving the rest uninitialized. Then security_socket_bind() reads the IP address bytes, including the uninitialized ones, to determine the port, or e.g. pass them further to sel_netnode_find(), which uses them to calculate a hash. Signed-off-by: Alexander Potapenko <glider(a)google.com> Acked-by: Eric Dumazet <edumazet(a)google.com> [PM: fixed some whitespace damage] Signed-off-by: Paul Moore <paul(a)paul-moore.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- security/selinux/hooks.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -4124,10 +4124,18 @@ static int selinux_socket_bind(struct so u32 sid, node_perm; if (family == PF_INET) { + if (addrlen < sizeof(struct sockaddr_in)) { + err = -EINVAL; + goto out; + } addr4 = (struct sockaddr_in *)address; snum = ntohs(addr4->sin_port); addrp = (char *)&addr4->sin_addr.s_addr; } else { + if (addrlen < SIN6_LEN_RFC2133) { + err = -EINVAL; + goto out; + } addr6 = (struct sockaddr_in6 *)address; snum = ntohs(addr6->sin6_port); addrp = (char *)&addr6->sin6_addr.s6_addr; Patches currently in stable-queue which might be from glider(a)google.com are queue-4.4/selinux-check-for-address-length-in-selinux_socket_bind.patch

7 years, 3 months

1
0
0 0

Patch "scsi: sg: close race condition in sg_remove_sfp_usercontext()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: sg: close race condition in sg_remove_sfp_usercontext() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-sg-close-race-condition-in-sg_remove_sfp_usercontext.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Hannes Reinecke <hare(a)suse.de> Date: Fri, 7 Apr 2017 09:34:17 +0200 Subject: scsi: sg: close race condition in sg_remove_sfp_usercontext() From: Hannes Reinecke <hare(a)suse.de> [ Upstream commit 97d27b0dd015e980ade63fda111fd1353276e28b ] sg_remove_sfp_usercontext() is clearing any sg requests, but needs to take 'rq_list_lock' when modifying the list. Reported-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn(a)suse.de> Tested-by: Johannes Thumshirn <jthumshirn(a)suse.de> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/sg.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -535,6 +535,7 @@ sg_read(struct file *filp, char __user * } else count = (old_hdr->result == 0) ? 0 : -EIO; sg_finish_rem_req(srp); + sg_remove_request(sfp, srp); retval = count; free_old_hdr: kfree(old_hdr); @@ -575,6 +576,7 @@ sg_new_read(Sg_fd * sfp, char __user *bu } err_out: err2 = sg_finish_rem_req(srp); + sg_remove_request(sfp, srp); return err ? : err2 ? : count; } @@ -811,6 +813,7 @@ sg_common_write(Sg_fd * sfp, Sg_request SCSI_LOG_TIMEOUT(1, sg_printk(KERN_INFO, sfp->parentdp, "sg_common_write: start_req err=%d\n", k)); sg_finish_rem_req(srp); + sg_remove_request(sfp, srp); return k; /* probably out of space --> ENOMEM */ } if (atomic_read(&sdp->detaching)) { @@ -823,6 +826,7 @@ sg_common_write(Sg_fd * sfp, Sg_request } sg_finish_rem_req(srp); + sg_remove_request(sfp, srp); return -ENODEV; } @@ -1312,6 +1316,7 @@ sg_rq_end_io_usercontext(struct work_str struct sg_fd *sfp = srp->parentfp; sg_finish_rem_req(srp); + sg_remove_request(sfp, srp); kref_put(&sfp->f_ref, sg_remove_sfp); } @@ -1856,8 +1861,6 @@ sg_finish_rem_req(Sg_request *srp) else sg_remove_scat(sfp, req_schp); - sg_remove_request(sfp, srp); - return ret; } @@ -2204,12 +2207,17 @@ sg_remove_sfp_usercontext(struct work_st struct sg_fd *sfp = container_of(work, struct sg_fd, ew.work); struct sg_device *sdp = sfp->parentdp; Sg_request *srp; + unsigned long iflags; /* Cleanup any responses which were never read(). */ + write_lock_irqsave(&sfp->rq_list_lock, iflags); while (!list_empty(&sfp->rq_list)) { srp = list_first_entry(&sfp->rq_list, Sg_request, entry); sg_finish_rem_req(srp); + list_del(&srp->entry); + srp->parentfp = NULL; } + write_unlock_irqrestore(&sfp->rq_list_lock, iflags); if (sfp->reserve.bufflen > 0) { SCSI_LOG_TIMEOUT(6, sg_printk(KERN_INFO, sdp, Patches currently in stable-queue which might be from hare(a)suse.de are queue-4.4/scsi-devinfo-apply-to-hp-xp-the-same-flags-as-hitachi-vsp.patch queue-4.4/scsi-sg-close-race-condition-in-sg_remove_sfp_usercontext.patch queue-4.4/scsi-dh-add-new-rdac-devices.patch

7 years, 3 months

1
0
0 0

Patch "scsi: sg: check for valid direction before starting the request" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: sg: check for valid direction before starting the request to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-sg-check-for-valid-direction-before-starting-the-request.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Johannes Thumshirn <jthumshirn(a)suse.de> Date: Fri, 7 Apr 2017 09:34:15 +0200 Subject: scsi: sg: check for valid direction before starting the request From: Johannes Thumshirn <jthumshirn(a)suse.de> [ Upstream commit 28676d869bbb5257b5f14c0c95ad3af3a7019dd5 ] Check for a valid direction before starting the request, otherwise we risk running into an assertion in the scsi midlayer checking for valid requests. [mkp: fixed typo] Signed-off-by: Johannes Thumshirn <jthumshirn(a)suse.de> Link: http://www.spinics.net/lists/linux-scsi/msg104400.html Reported-by: Dmitry Vyukov <dvyukov(a)google.com> Signed-off-by: Hannes Reinecke <hare(a)suse.com> Tested-by: Johannes Thumshirn <jthumshirn(a)suse.de> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/sg.c | 46 ++++++++++++++++++++++++++++++++++------------ 1 file changed, 34 insertions(+), 12 deletions(-) --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -674,18 +674,14 @@ sg_write(struct file *filp, const char _ * is a non-zero input_size, so emit a warning. */ if (hp->dxfer_direction == SG_DXFER_TO_FROM_DEV) { - static char cmd[TASK_COMM_LEN]; - if (strcmp(current->comm, cmd)) { - printk_ratelimited(KERN_WARNING - "sg_write: data in/out %d/%d bytes " - "for SCSI command 0x%x-- guessing " - "data in;\n program %s not setting " - "count and/or reply_len properly\n", - old_hdr.reply_len - (int)SZ_SG_HEADER, - input_size, (unsigned int) cmnd[0], - current->comm); - strcpy(cmd, current->comm); - } + printk_ratelimited(KERN_WARNING + "sg_write: data in/out %d/%d bytes " + "for SCSI command 0x%x-- guessing " + "data in;\n program %s not setting " + "count and/or reply_len properly\n", + old_hdr.reply_len - (int)SZ_SG_HEADER, + input_size, (unsigned int) cmnd[0], + current->comm); } k = sg_common_write(sfp, srp, cmnd, sfp->timeout, blocking); return (k < 0) ? k : count; @@ -764,6 +760,29 @@ sg_new_write(Sg_fd *sfp, struct file *fi return count; } +static bool sg_is_valid_dxfer(sg_io_hdr_t *hp) +{ + switch (hp->dxfer_direction) { + case SG_DXFER_NONE: + if (hp->dxferp || hp->dxfer_len > 0) + return false; + return true; + case SG_DXFER_TO_DEV: + case SG_DXFER_FROM_DEV: + case SG_DXFER_TO_FROM_DEV: + if (!hp->dxferp || hp->dxfer_len == 0) + return false; + return true; + case SG_DXFER_UNKNOWN: + if ((!hp->dxferp && hp->dxfer_len) || + (hp->dxferp && hp->dxfer_len == 0)) + return false; + return true; + default: + return false; + } +} + static int sg_common_write(Sg_fd * sfp, Sg_request * srp, unsigned char *cmnd, int timeout, int blocking) @@ -784,6 +803,9 @@ sg_common_write(Sg_fd * sfp, Sg_request "sg_common_write: scsi opcode=0x%02x, cmd_size=%d\n", (int) cmnd[0], (int) hp->cmd_len)); + if (!sg_is_valid_dxfer(hp)) + return -EINVAL; + k = sg_start_req(srp, cmnd); if (k) { SCSI_LOG_TIMEOUT(1, sg_printk(KERN_INFO, sfp->parentdp, Patches currently in stable-queue which might be from jthumshirn(a)suse.de are queue-4.4/scsi-sg-check-for-valid-direction-before-starting-the-request.patch queue-4.4/scsi-sg-close-race-condition-in-sg_remove_sfp_usercontext.patch queue-4.4/scsi-core-scsi_get_device_flags_keyed-always-return-device-flags.patch

7 years, 3 months

1
0
0 0

Patch "scsi: ses: don't get power status of SES device slot on probe" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: ses: don't get power status of SES device slot on probe to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-ses-don-t-get-power-status-of-ses-device-slot-on-probe.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Mauricio Faria de Oliveira <mauricfo(a)linux.vnet.ibm.com> Date: Wed, 5 Apr 2017 12:18:19 -0300 Subject: scsi: ses: don't get power status of SES device slot on probe From: Mauricio Faria de Oliveira <mauricfo(a)linux.vnet.ibm.com> [ Upstream commit 75106523f39751390b5789b36ee1d213b3af1945 ] The commit 08024885a2a3 ("ses: Add power_status to SES device slot") introduced the 'power_status' attribute to enclosure components and the associated callbacks. There are 2 callbacks available to get the power status of a device: 1) ses_get_power_status() for 'struct enclosure_component_callbacks' 2) get_component_power_status() for the sysfs device attribute (these are available for kernel-space and user-space, respectively.) However, despite both methods being available to get power status on demand, that commit also introduced a call to get power status in ses_enclosure_data_process(). This dramatically increased the total probe time for SCSI devices on larger configurations, because ses_enclosure_data_process() is called several times during the SCSI devices probe and loops over the component devices (but that is another problem, another patch). That results in a tremendous continuous hammering of SCSI Receive Diagnostics commands to the enclosure-services device, which does delay the total probe time for the SCSI devices __significantly__: Originally, ~34 minutes on a system attached to ~170 disks: [ 9214.490703] mpt3sas version 13.100.00.00 loaded ... [11256.580231] scsi 17:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) With this patch, it decreased to ~2.5 minutes -- a 13.6x faster [ 1002.992533] mpt3sas version 13.100.00.00 loaded ... [ 1151.978831] scsi 11:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) Back to the commit discussion.. on the ses_get_power_status() call introduced in ses_enclosure_data_process(): impact of removing it. That may possibly be in place to initialize the power status value on device probe. However, those 2 functions available to retrieve that value _do_ automatically refresh/update it. So the potential benefit would be a direct access of the 'power_status' field which does not use the callbacks... But the only reader of 'struct enclosure_component::power_status' is the get_component_power_status() callback for sysfs attribute, and it _does_ check for and call the .get_power_status callback, (which indeed is defined and implemented by that commit), so the power status value is, again, automatically updated. So, the remaining potential for a direct/non-callback access to the power_status attribute would be out-of-tree modules -- well, for those, if they are for whatever reason interested in values that are set during device probe and not up-to-date by the time they need it.. well, that would be curious. Well, to handle that more properly, set the initial power state value to '-1' (i.e., uninitialized) instead of '1' (power 'on'), and check for it in that callback which may do an direct access to the field value _if_ a callback function is not defined. Signed-off-by: Mauricio Faria de Oliveira <mauricfo(a)linux.vnet.ibm.com> Fixes: 08024885a2a3 ("ses: Add power_status to SES device slot") Reviewed-by: Dan Williams <dan.j.williams(a)intel.com> Reviewed-by: Song Liu <songliubraving(a)fb.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/misc/enclosure.c | 7 ++++++- drivers/scsi/ses.c | 1 - 2 files changed, 6 insertions(+), 2 deletions(-) --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -148,7 +148,7 @@ enclosure_register(struct device *dev, c for (i = 0; i < components; i++) { edev->component[i].number = -1; edev->component[i].slot = -1; - edev->component[i].power_status = 1; + edev->component[i].power_status = -1; } mutex_lock(&container_list_lock); @@ -600,6 +600,11 @@ static ssize_t get_component_power_statu if (edev->cb->get_power_status) edev->cb->get_power_status(edev, ecomp); + + /* If still uninitialized, the callback failed or does not exist. */ + if (ecomp->power_status == -1) + return (edev->cb->get_power_status) ? -EIO : -ENOTTY; + return snprintf(buf, 40, "%s\n", ecomp->power_status ? "on" : "off"); } --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -546,7 +546,6 @@ static void ses_enclosure_data_process(s ecomp = &edev->component[components++]; if (!IS_ERR(ecomp)) { - ses_get_power_status(edev, ecomp); if (addl_desc_ptr) ses_process_descriptor( ecomp, Patches currently in stable-queue which might be from mauricfo(a)linux.vnet.ibm.com are queue-4.4/scsi-ses-don-t-get-power-status-of-ses-device-slot-on-probe.patch

7 years, 3 months

1
0
0 0

Patch "scsi: ipr: Fix missed EH wakeup" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: ipr: Fix missed EH wakeup to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-ipr-fix-missed-eh-wakeup.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Brian King <brking(a)linux.vnet.ibm.com> Date: Wed, 15 Mar 2017 16:58:36 -0500 Subject: scsi: ipr: Fix missed EH wakeup From: Brian King <brking(a)linux.vnet.ibm.com> [ Upstream commit 66a0d59cdd12546ddf01d229de28b07ccf6d637f ] Following a command abort or device reset, ipr's EH handlers wait for the commands getting aborted to get sent back from the adapter prior to returning from the EH handler. This fixes up some cases where the completion handler was not getting called, which would have resulted in the EH thread waiting until it timed out, greatly extending EH time. Signed-off-by: Brian King <brking(a)linux.vnet.ibm.com> Reviewed-by: Wendy Xiong <wenxiong(a)linux.vnet.ibm.com> Tested-by: Wendy Xiong <wenxiong(a)linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/ipr.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -835,8 +835,10 @@ static void ipr_sata_eh_done(struct ipr_ qc->err_mask |= AC_ERR_OTHER; sata_port->ioasa.status |= ATA_BUSY; - list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); ata_qc_complete(qc); + if (ipr_cmd->eh_comp) + complete(ipr_cmd->eh_comp); + list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); } /** @@ -5864,8 +5866,10 @@ static void ipr_erp_done(struct ipr_cmnd res->in_erp = 0; } scsi_dma_unmap(ipr_cmd->scsi_cmd); - list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); scsi_cmd->scsi_done(scsi_cmd); + if (ipr_cmd->eh_comp) + complete(ipr_cmd->eh_comp); + list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); } /** @@ -6255,8 +6259,10 @@ static void ipr_erp_start(struct ipr_ioa } scsi_dma_unmap(ipr_cmd->scsi_cmd); - list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); scsi_cmd->scsi_done(scsi_cmd); + if (ipr_cmd->eh_comp) + complete(ipr_cmd->eh_comp); + list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); } /** @@ -6282,8 +6288,10 @@ static void ipr_scsi_done(struct ipr_cmn scsi_dma_unmap(scsi_cmd); spin_lock_irqsave(ipr_cmd->hrrq->lock, lock_flags); - list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); scsi_cmd->scsi_done(scsi_cmd); + if (ipr_cmd->eh_comp) + complete(ipr_cmd->eh_comp); + list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); spin_unlock_irqrestore(ipr_cmd->hrrq->lock, lock_flags); } else { spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); Patches currently in stable-queue which might be from brking(a)linux.vnet.ibm.com are queue-4.4/scsi-ipr-fix-missed-eh-wakeup.patch

7 years, 3 months

1
0
0 0

Patch "scsi: dh: add new rdac devices" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: dh: add new rdac devices to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-dh-add-new-rdac-devices.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Xose Vazquez Perez <xose.vazquez(a)gmail.com> Date: Fri, 17 Nov 2017 22:05:13 +0100 Subject: scsi: dh: add new rdac devices From: Xose Vazquez Perez <xose.vazquez(a)gmail.com> [ Upstream commit 4b3aec2bbbce1c35f50e7475a9fd78d24b9ea4ea ] Add IBM 3542 and 3552, arrays: FAStT200 and FAStT500. Add full STK OPENstorage family, arrays: 9176, D173, D178, D210, D220, D240 and D280. Add STK BladeCtlr family, arrays: B210, B220, B240 and B280. These changes were done in multipath-tools time ago. Cc: NetApp RDAC team <ng-eseries-upstream-maintainers(a)netapp.com> Cc: Hannes Reinecke <hare(a)suse.de> Cc: Christophe Varoqui <christophe.varoqui(a)opensvc.com> Cc: Martin K. Petersen <martin.petersen(a)oracle.com> Cc: James E.J. Bottomley <jejb(a)linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi(a)vger.kernel.org> Cc: device-mapper development <dm-devel(a)redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez(a)gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/scsi_dh.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/scsi/scsi_dh.c +++ b/drivers/scsi/scsi_dh.c @@ -56,10 +56,13 @@ static const struct scsi_dh_blist scsi_d {"IBM", "1815", "rdac", }, {"IBM", "1818", "rdac", }, {"IBM", "3526", "rdac", }, + {"IBM", "3542", "rdac", }, + {"IBM", "3552", "rdac", }, {"SGI", "TP9", "rdac", }, {"SGI", "IS", "rdac", }, - {"STK", "OPENstorage D280", "rdac", }, + {"STK", "OPENstorage", "rdac", }, {"STK", "FLEXLINE 380", "rdac", }, + {"STK", "BladeCtlr", "rdac", }, {"SUN", "CSM", "rdac", }, {"SUN", "LCSM100", "rdac", }, {"SUN", "STK6580_6780", "rdac", }, Patches currently in stable-queue which might be from xose.vazquez(a)gmail.com are queue-4.4/scsi-devinfo-apply-to-hp-xp-the-same-flags-as-hitachi-vsp.patch queue-4.4/scsi-dh-add-new-rdac-devices.patch

7 years, 3 months

1
0
0 0

Patch "scsi: devinfo: apply to HP XP the same flags as Hitachi VSP" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: devinfo: apply to HP XP the same flags as Hitachi VSP to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-devinfo-apply-to-hp-xp-the-same-flags-as-hitachi-vsp.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Xose Vazquez Perez <xose.vazquez(a)gmail.com> Date: Fri, 17 Nov 2017 21:31:36 +0100 Subject: scsi: devinfo: apply to HP XP the same flags as Hitachi VSP From: Xose Vazquez Perez <xose.vazquez(a)gmail.com> [ Upstream commit b369a0471503130cfc74f9f62071db97f48948c3 ] Commit 56f3d383f37b ("scsi: scsi_devinfo: Add TRY_VPD_PAGES to HITACHI OPEN-V blacklist entry") modified some Hitachi entries: HITACHI is always supporting VPD pages, even though it's claiming to support SCSI Revision 3 only. The same should have been done also for HP-rebranded. [mkp: checkpatch and tweaked commit message] Cc: Hannes Reinecke <hare(a)suse.de> Cc: Takahiro Yasui <takahiro.yasui(a)hds.com> Cc: Matthias Rudolph <Matthias.Rudolph(a)hitachivantara.com> Cc: Martin K. Petersen <martin.petersen(a)oracle.com> Cc: James E.J. Bottomley <jejb(a)linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi(a)vger.kernel.org> Signed-off-by: Xose Vazquez Perez <xose.vazquez(a)gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/scsi_devinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -180,7 +180,7 @@ static struct { {"HITACHI", "6586-", "*", BLIST_SPARSELUN | BLIST_LARGELUN}, {"HITACHI", "6588-", "*", BLIST_SPARSELUN | BLIST_LARGELUN}, {"HP", "A6189A", NULL, BLIST_SPARSELUN | BLIST_LARGELUN}, /* HP VA7400 */ - {"HP", "OPEN-", "*", BLIST_REPORTLUN2}, /* HP XP Arrays */ + {"HP", "OPEN-", "*", BLIST_REPORTLUN2 | BLIST_TRY_VPD_PAGES}, /* HP XP Arrays */ {"HP", "NetRAID-4M", NULL, BLIST_FORCELUN}, {"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD}, {"HP", "C1557A", NULL, BLIST_FORCELUN}, Patches currently in stable-queue which might be from xose.vazquez(a)gmail.com are queue-4.4/scsi-devinfo-apply-to-hp-xp-the-same-flags-as-hitachi-vsp.patch queue-4.4/scsi-dh-add-new-rdac-devices.patch

7 years, 3 months

1
0
0 0

Patch "scsi: core: scsi_get_device_flags_keyed(): Always return device flags" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: core: scsi_get_device_flags_keyed(): Always return device flags to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-core-scsi_get_device_flags_keyed-always-return-device-flags.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Bart Van Assche <bart.vanassche(a)wdc.com> Date: Mon, 4 Dec 2017 10:36:31 -0800 Subject: scsi: core: scsi_get_device_flags_keyed(): Always return device flags From: Bart Van Assche <bart.vanassche(a)wdc.com> [ Upstream commit a44c9d36509c83cf64f33b93f6ab2e63822c01eb ] Since scsi_get_device_flags_keyed() callers do not check whether or not the returned value is an error code, change that function such that it returns a flags value even if the 'key' argument is invalid. Note: since commit 28a0bc4120d3 ("scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP") bit 31 is a valid device information flag so checking whether bit 31 is set in the return value is not sufficient to tell the difference between an error code and a flags value. Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Hannes Reinecke <hare(a)suse.com> Cc: Johannes Thumshirn <jthumshirn(a)suse.de> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/scsi_devinfo.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -589,17 +589,12 @@ int scsi_get_device_flags_keyed(struct s int key) { struct scsi_dev_info_list *devinfo; - int err; devinfo = scsi_dev_info_list_find(vendor, model, key); if (!IS_ERR(devinfo)) return devinfo->flags; - err = PTR_ERR(devinfo); - if (err != -ENOENT) - return err; - - /* nothing found, return nothing */ + /* key or device not found: return nothing */ if (key != SCSI_DEVINFO_GLOBAL) return 0; Patches currently in stable-queue which might be from bart.vanassche(a)wdc.com are queue-4.4/scsi-core-scsi_get_device_flags_keyed-always-return-device-flags.patch

7 years, 3 months

1
0
0 0

Patch "sched: Stop switched_to_rt() from sending IPIs to offline CPUs" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sched: Stop switched_to_rt() from sending IPIs to offline CPUs to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sched-stop-switched_to_rt-from-sending-ipis-to-offline-cpus.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: "Paul E. McKenney" <paulmck(a)linux.vnet.ibm.com> Date: Fri, 13 Oct 2017 17:00:18 -0700 Subject: sched: Stop switched_to_rt() from sending IPIs to offline CPUs From: "Paul E. McKenney" <paulmck(a)linux.vnet.ibm.com> [ Upstream commit 2fe2582649aa2355f79acddb86bd4d6c5363eb63 ] The rcutorture test suite occasionally provokes a splat due to invoking rt_mutex_lock() which needs to boost the priority of a task currently sitting on a runqueue that belongs to an offline CPU: WARNING: CPU: 0 PID: 12 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40 Modules linked in: CPU: 0 PID: 12 Comm: rcub/7 Not tainted 4.14.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff9ed3de5f8cc0 task.stack: ffffbbf80012c000 RIP: 0010:native_smp_send_reschedule+0x37/0x40 RSP: 0018:ffffbbf80012fd10 EFLAGS: 00010082 RAX: 000000000000002f RBX: ffff9ed3dd9cb300 RCX: 0000000000000004 RDX: 0000000080000004 RSI: 0000000000000086 RDI: 00000000ffffffff RBP: ffffbbf80012fd10 R08: 000000000009da7a R09: 0000000000007b9d R10: 0000000000000001 R11: ffffffffbb57c2cd R12: 000000000000000d R13: ffff9ed3de5f8cc0 R14: 0000000000000061 R15: ffff9ed3ded59200 FS: 0000000000000000(0000) GS:ffff9ed3dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000080686f0 CR3: 000000001b9e0000 CR4: 00000000000006f0 Call Trace: resched_curr+0x61/0xd0 switched_to_rt+0x8f/0xa0 rt_mutex_setprio+0x25c/0x410 task_blocks_on_rt_mutex+0x1b3/0x1f0 rt_mutex_slowlock+0xa9/0x1e0 rt_mutex_lock+0x29/0x30 rcu_boost_kthread+0x127/0x3c0 kthread+0x104/0x140 ? rcu_report_unblock_qs_rnp+0x90/0x90 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x22/0x30 Code: f0 00 0f 92 c0 84 c0 74 14 48 8b 05 34 74 c5 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 a0 c6 fc b9 e8 d5 b5 06 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 a2 d1 13 02 85 c0 75 38 55 48 But the target task's priority has already been adjusted, so the only purpose of switched_to_rt() invoking resched_curr() is to wake up the CPU running some task that needs to be preempted by the boosted task. But the CPU is offline, which presumably means that the task must be migrated to some other CPU, and that this other CPU will undertake any needed preemption at the time of migration. Because the runqueue lock is held when resched_curr() is invoked, we know that the boosted task cannot go anywhere, so it is not necessary to invoke resched_curr() in this particular case. This commit therefore makes switched_to_rt() refrain from invoking resched_curr() when the target CPU is offline. Signed-off-by: Paul E. McKenney <paulmck(a)linux.vnet.ibm.com> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/sched/rt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -2144,7 +2144,7 @@ static void switched_to_rt(struct rq *rq if (p->nr_cpus_allowed > 1 && rq->rt.overloaded) queue_push_tasks(rq); #endif /* CONFIG_SMP */ - if (p->prio < rq->curr->prio) + if (p->prio < rq->curr->prio && cpu_online(cpu_of(rq))) resched_curr(rq); } } Patches currently in stable-queue which might be from paulmck(a)linux.vnet.ibm.com are queue-4.4/sched-stop-resched_cpu-from-sending-ipis-to-offline-cpus.patch queue-4.4/sched-stop-switched_to_rt-from-sending-ipis-to-offline-cpus.patch queue-4.4/rcutorture-configinit-fix-build-directory-error-message.patch

7 years, 3 months

1
0
0 0

Patch "sched: Stop resched_cpu() from sending IPIs to offline CPUs" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sched: Stop resched_cpu() from sending IPIs to offline CPUs to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sched-stop-resched_cpu-from-sending-ipis-to-offline-cpus.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: "Paul E. McKenney" <paulmck(a)linux.vnet.ibm.com> Date: Fri, 13 Oct 2017 16:24:28 -0700 Subject: sched: Stop resched_cpu() from sending IPIs to offline CPUs From: "Paul E. McKenney" <paulmck(a)linux.vnet.ibm.com> [ Upstream commit a0982dfa03efca6c239c52cabebcea4afb93ea6b ] The rcutorture test suite occasionally provokes a splat due to invoking resched_cpu() on an offline CPU: WARNING: CPU: 2 PID: 8 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40 Modules linked in: CPU: 2 PID: 8 Comm: rcu_preempt Not tainted 4.14.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff902ede9daf00 task.stack: ffff96c50010c000 RIP: 0010:native_smp_send_reschedule+0x37/0x40 RSP: 0018:ffff96c50010fdb8 EFLAGS: 00010096 RAX: 000000000000002e RBX: ffff902edaab4680 RCX: 0000000000000003 RDX: 0000000080000003 RSI: 0000000000000000 RDI: 00000000ffffffff RBP: ffff96c50010fdb8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 00000000299f36ae R12: 0000000000000001 R13: ffffffff9de64240 R14: 0000000000000001 R15: ffffffff9de64240 FS: 0000000000000000(0000) GS:ffff902edfc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f7d4c642 CR3: 000000001e0e2000 CR4: 00000000000006e0 Call Trace: resched_curr+0x8f/0x1c0 resched_cpu+0x2c/0x40 rcu_implicit_dynticks_qs+0x152/0x220 force_qs_rnp+0x147/0x1d0 ? sync_rcu_exp_select_cpus+0x450/0x450 rcu_gp_kthread+0x5a9/0x950 kthread+0x142/0x180 ? force_qs_rnp+0x1d0/0x1d0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Code: 14 01 0f 92 c0 84 c0 74 14 48 8b 05 14 4f f4 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 38 89 ca 9d e8 e5 56 08 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 52 9e 37 02 85 c0 75 38 55 48 ---[ end trace 26df9e5df4bba4ac ]--- This splat cannot be generated by expedited grace periods because they always invoke resched_cpu() on the current CPU, which is good because expedited grace periods require that resched_cpu() unconditionally succeed. However, other parts of RCU can tolerate resched_cpu() acting as a no-op, at least as long as it doesn't happen too often. This commit therefore makes resched_cpu() invoke resched_curr() only if the CPU is either online or is the current CPU. Signed-off-by: Paul E. McKenney <paulmck(a)linux.vnet.ibm.com> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/sched/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -601,7 +601,8 @@ void resched_cpu(int cpu) unsigned long flags; raw_spin_lock_irqsave(&rq->lock, flags); - resched_curr(rq); + if (cpu_online(cpu) || cpu == smp_processor_id()) + resched_curr(rq); raw_spin_unlock_irqrestore(&rq->lock, flags); } Patches currently in stable-queue which might be from paulmck(a)linux.vnet.ibm.com are queue-4.4/sched-stop-resched_cpu-from-sending-ipis-to-offline-cpus.patch queue-4.4/sched-stop-switched_to_rt-from-sending-ipis-to-offline-cpus.patch queue-4.4/rcutorture-configinit-fix-build-directory-error-message.patch

7 years, 3 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror