- Linux-stable-mirror - lists.linaro.org

Patch "drivers: net: xgene: Fix wrong logical operation" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drivers: net: xgene: Fix wrong logical operation to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drivers-net-xgene-fix-wrong-logical-operation.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Quan Nguyen <qnguyen(a)apm.com> Date: Wed, 15 Mar 2017 13:27:17 -0700 Subject: drivers: net: xgene: Fix wrong logical operation From: Quan Nguyen <qnguyen(a)apm.com> [ Upstream commit 11623fce0f9afef30c45e3f2120b063de3809a8f ] This patch fixes the wrong logical OR operation by changing it to bit-wise OR operation. Fixes: 3bb502f83080 ("drivers: net: xgene: fix statistics counters race condition") Signed-off-by: Iyappan Subramanian <isubramanian(a)apm.com> Signed-off-by: Quan Nguyen <qnguyen(a)apm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c @@ -537,9 +537,9 @@ static int xgene_enet_rx_frame(struct xg buf_pool->rx_skb[skb_index] = NULL; /* checking for error */ - status = (GET_VAL(ELERR, le64_to_cpu(raw_desc->m0)) << LERR_LEN) || + status = (GET_VAL(ELERR, le64_to_cpu(raw_desc->m0)) << LERR_LEN) | GET_VAL(LERR, le64_to_cpu(raw_desc->m0)); - if (unlikely(status > 2)) { + if (unlikely(status)) { dev_kfree_skb_any(skb); xgene_enet_parse_error(rx_ring, netdev_priv(rx_ring->ndev), status); Patches currently in stable-queue which might be from qnguyen(a)apm.com are queue-4.9/drivers-net-xgene-fix-wrong-logical-operation.patch queue-4.9/drivers-net-xgene-fix-hardware-checksum-setting.patch queue-4.9/drivers-net-phy-xgene-fix-mdio-write.patch

7 years, 3 months

1
0
0 0

Patch "drivers: net: xgene: Fix Rx checksum validation logic" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drivers: net: xgene: Fix Rx checksum validation logic to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drivers-net-xgene-fix-rx-checksum-validation-logic.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Iyappan Subramanian <isubramanian(a)apm.com> Date: Wed, 15 Mar 2017 13:27:18 -0700 Subject: drivers: net: xgene: Fix Rx checksum validation logic From: Iyappan Subramanian <isubramanian(a)apm.com> [ Upstream commit 0a0400c3094b5d5cedd479ddbf1329de74c09c4b ] This patch fixes Rx checksum validation logic and adds NETIF_F_RXCSUM flag. Signed-off-by: Iyappan Subramanian <isubramanian(a)apm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 27 ++++++++++++++--------- 1 file changed, 17 insertions(+), 10 deletions(-) --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c @@ -505,14 +505,24 @@ static netdev_tx_t xgene_enet_start_xmit return NETDEV_TX_OK; } -static void xgene_enet_skip_csum(struct sk_buff *skb) +static void xgene_enet_rx_csum(struct sk_buff *skb) { + struct net_device *ndev = skb->dev; struct iphdr *iph = ip_hdr(skb); - if (!ip_is_fragment(iph) || - (iph->protocol != IPPROTO_TCP && iph->protocol != IPPROTO_UDP)) { - skb->ip_summed = CHECKSUM_UNNECESSARY; - } + if (!(ndev->features & NETIF_F_RXCSUM)) + return; + + if (skb->protocol != htons(ETH_P_IP)) + return; + + if (ip_is_fragment(iph)) + return; + + if (iph->protocol != IPPROTO_TCP && iph->protocol != IPPROTO_UDP) + return; + + skb->ip_summed = CHECKSUM_UNNECESSARY; } static int xgene_enet_rx_frame(struct xgene_enet_desc_ring *rx_ring, @@ -555,10 +565,7 @@ static int xgene_enet_rx_frame(struct xg skb_checksum_none_assert(skb); skb->protocol = eth_type_trans(skb, ndev); - if (likely((ndev->features & NETIF_F_IP_CSUM) && - skb->protocol == htons(ETH_P_IP))) { - xgene_enet_skip_csum(skb); - } + xgene_enet_rx_csum(skb); rx_ring->rx_packets++; rx_ring->rx_bytes += datalen; @@ -1725,7 +1732,7 @@ static int xgene_enet_probe(struct platf xgene_enet_setup_ops(pdata); if (pdata->phy_mode == PHY_INTERFACE_MODE_XGMII) { - ndev->features |= NETIF_F_TSO; + ndev->features |= NETIF_F_TSO | NETIF_F_RXCSUM; spin_lock_init(&pdata->mss_lock); } ndev->hw_features = ndev->features; Patches currently in stable-queue which might be from isubramanian(a)apm.com are queue-4.9/drivers-net-xgene-fix-wrong-logical-operation.patch queue-4.9/drivers-net-xgene-fix-hardware-checksum-setting.patch queue-4.9/drivers-net-xgene-fix-rx-checksum-validation-logic.patch queue-4.9/drivers-net-phy-xgene-fix-mdio-write.patch

7 years, 3 months

1
0
0 0

Patch "drivers: net: xgene: Fix hardware checksum setting" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drivers: net: xgene: Fix hardware checksum setting to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drivers-net-xgene-fix-hardware-checksum-setting.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Quan Nguyen <qnguyen(a)apm.com> Date: Wed, 15 Mar 2017 13:27:16 -0700 Subject: drivers: net: xgene: Fix hardware checksum setting From: Quan Nguyen <qnguyen(a)apm.com> [ Upstream commit e026e700d940a1ea3d3bc84d92ac668b1f015462 ] This patch fixes the hardware checksum settings by properly program the classifier. Otherwise, packet may be received with checksum error on X-Gene1 SoC. Signed-off-by: Quan Nguyen <qnguyen(a)apm.com> Signed-off-by: Iyappan Subramanian <isubramanian(a)apm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 1 + drivers/net/ethernet/apm/xgene/xgene_enet_hw.h | 1 + 2 files changed, 2 insertions(+) --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c @@ -560,6 +560,7 @@ static void xgene_enet_cle_bypass(struct xgene_enet_rd_csr(pdata, CLE_BYPASS_REG0_0_ADDR, &cb); cb |= CFG_CLE_BYPASS_EN0; CFG_CLE_IP_PROTOCOL0_SET(&cb, 3); + CFG_CLE_IP_HDR_LEN_SET(&cb, 0); xgene_enet_wr_csr(pdata, CLE_BYPASS_REG0_0_ADDR, cb); xgene_enet_rd_csr(pdata, CLE_BYPASS_REG1_0_ADDR, &cb); --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h @@ -163,6 +163,7 @@ enum xgene_enet_rm { #define CFG_RXCLK_MUXSEL0_SET(dst, val) xgene_set_bits(dst, val, 26, 3) #define CFG_CLE_IP_PROTOCOL0_SET(dst, val) xgene_set_bits(dst, val, 16, 2) +#define CFG_CLE_IP_HDR_LEN_SET(dst, val) xgene_set_bits(dst, val, 8, 5) #define CFG_CLE_DSTQID0_SET(dst, val) xgene_set_bits(dst, val, 0, 12) #define CFG_CLE_FPSEL0_SET(dst, val) xgene_set_bits(dst, val, 16, 4) #define CFG_MACMODE_SET(dst, val) xgene_set_bits(dst, val, 18, 2) Patches currently in stable-queue which might be from qnguyen(a)apm.com are queue-4.9/drivers-net-xgene-fix-wrong-logical-operation.patch queue-4.9/drivers-net-xgene-fix-hardware-checksum-setting.patch queue-4.9/drivers-net-phy-xgene-fix-mdio-write.patch

7 years, 3 months

1
0
0 0

Patch "drivers: net: phy: xgene: Fix mdio write" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drivers: net: phy: xgene: Fix mdio write to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drivers-net-phy-xgene-fix-mdio-write.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Quan Nguyen <qnguyen(a)apm.com> Date: Wed, 15 Mar 2017 13:27:15 -0700 Subject: drivers: net: phy: xgene: Fix mdio write From: Quan Nguyen <qnguyen(a)apm.com> [ Upstream commit 4b72436dc3dd2457056b22d6f147777368c869fa ] This patches fixes a typo in the argument to xgene_enet_wr_mdio_csr(). Signed-off-by: Quan Nguyen <qnguyen(a)apm.com> Signed-off-by: Iyappan Subramanian <isubramanian(a)apm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/phy/mdio-xgene.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/phy/mdio-xgene.c +++ b/drivers/net/phy/mdio-xgene.c @@ -232,7 +232,7 @@ static int xgene_xfi_mdio_write(struct m val = SET_VAL(HSTPHYADX, phy_id) | SET_VAL(HSTREGADX, reg) | SET_VAL(HSTMIIMWRDAT, data); - xgene_enet_wr_mdio_csr(addr, MIIM_FIELD_ADDR, data); + xgene_enet_wr_mdio_csr(addr, MIIM_FIELD_ADDR, val); val = HSTLDCMD | SET_VAL(HSTMIIMCMD, MIIM_CMD_LEGACY_WRITE); xgene_enet_wr_mdio_csr(addr, MIIM_COMMAND_ADDR, val); Patches currently in stable-queue which might be from qnguyen(a)apm.com are queue-4.9/drivers-net-xgene-fix-wrong-logical-operation.patch queue-4.9/drivers-net-xgene-fix-hardware-checksum-setting.patch queue-4.9/drivers-net-phy-xgene-fix-mdio-write.patch

7 years, 3 months

1
0
0 0

Patch "driver: (adm1275) set the m, b and R coefficients correctly for power" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled driver: (adm1275) set the m,b and R coefficients correctly for power to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: driver-adm1275-set-the-m-b-and-r-coefficients-correctly-for-power.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Shikhar Dogra <shidogra(a)cisco.com> Date: Mon, 27 Mar 2017 16:16:44 -0700 Subject: driver: (adm1275) set the m,b and R coefficients correctly for power From: Shikhar Dogra <shidogra(a)cisco.com> [ Upstream commit 6faecba0b3da7b617bf72bef422bf0d3bb6dfe7d ] Seems like coefficient values for m, b and R under power have been put in the wrong order. Rearranging them properly to get correct values of coefficients for power. For specs, please refer to table 7 (page 35) on http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1075.… Fixes: 904b296f308d ("hwmon: (adm1275) Introduce configuration data structure for coeffcients") Signed-off-by: Shikhar Dogra <shidogra(a)cisco.com> Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hwmon/pmbus/adm1275.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/hwmon/pmbus/adm1275.c +++ b/drivers/hwmon/pmbus/adm1275.c @@ -101,8 +101,8 @@ static const struct coefficients adm1075 [0] = { 27169, 0, -1 }, /* voltage */ [1] = { 806, 20475, -1 }, /* current, irange25 */ [2] = { 404, 20475, -1 }, /* current, irange50 */ - [3] = { 0, -1, 8549 }, /* power, irange25 */ - [4] = { 0, -1, 4279 }, /* power, irange50 */ + [3] = { 8549, 0, -1 }, /* power, irange25 */ + [4] = { 4279, 0, -1 }, /* power, irange50 */ }; static const struct coefficients adm1275_coefficients[] = { Patches currently in stable-queue which might be from shidogra(a)cisco.com are queue-4.9/driver-adm1275-set-the-m-b-and-r-coefficients-correctly-for-power.patch

7 years, 3 months

1
0
0 0

Patch "dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dmaengine-imx-sdma-add-1ms-delay-to-ensure-sdma-channel-is-stopped.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Jiada Wang <jiada_wang(a)mentor.com> Date: Thu, 16 Mar 2017 23:12:09 -0700 Subject: dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped From: Jiada Wang <jiada_wang(a)mentor.com> [ Upstream commit 7f3ff14b7eb1ffad132117f08a1973b48e653d43 ] sdma_disable_channel() cannot ensure dma is stopped to access module's FIFOs. There is chance SDMA core is running and accessing BD when disable of corresponding channel, this may cause sometimes even after call of .sdma_disable_channel(), SDMA core still be running and accessing module's FIFOs. According to NXP R&D team a delay of one BD SDMA cost time (maximum is 1ms) should be added after disable of the channel bit, to ensure SDMA core has really been stopped after SDMA clients call .device_terminate_all. This patch introduces adds a new function sdma_disable_channel_with_delay() which simply adds 1ms delay after call sdma_disable_channel(), and set it as .device_terminate_all. Signed-off-by: Jiada Wang <jiada_wang(a)mentor.com> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma/imx-sdma.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -937,6 +937,21 @@ static int sdma_disable_channel(struct d return 0; } +static int sdma_disable_channel_with_delay(struct dma_chan *chan) +{ + sdma_disable_channel(chan); + + /* + * According to NXP R&D team a delay of one BD SDMA cost time + * (maximum is 1ms) should be added after disable of the channel + * bit, to ensure SDMA core has really been stopped after SDMA + * clients call .device_terminate_all. + */ + mdelay(1); + + return 0; +} + static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac) { struct sdma_engine *sdma = sdmac->sdma; @@ -1828,7 +1843,7 @@ static int sdma_probe(struct platform_de sdma->dma_device.device_prep_slave_sg = sdma_prep_slave_sg; sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic; sdma->dma_device.device_config = sdma_config; - sdma->dma_device.device_terminate_all = sdma_disable_channel; + sdma->dma_device.device_terminate_all = sdma_disable_channel_with_delay; sdma->dma_device.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); sdma->dma_device.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); sdma->dma_device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); Patches currently in stable-queue which might be from jiada_wang(a)mentor.com are queue-4.9/dmaengine-imx-sdma-add-1ms-delay-to-ensure-sdma-channel-is-stopped.patch

7 years, 3 months

1
0
0 0

Patch "dmaengine: bcm2835-dma: Use vchan_terminate_vdesc() instead of desc_free" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dmaengine: bcm2835-dma: Use vchan_terminate_vdesc() instead of desc_free to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dmaengine-bcm2835-dma-use-vchan_terminate_vdesc-instead-of-desc_free.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Date: Tue, 14 Nov 2017 16:32:07 +0200 Subject: dmaengine: bcm2835-dma: Use vchan_terminate_vdesc() instead of desc_free From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> [ Upstream commit de92436ac40ffe9933230aa503e24dbb5ede9201 ] To avoid race with vchan_complete, use the race free way to terminate running transfer. Implement the device_synchronize callback to make sure that the terminated descriptor is freed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Acked-by: Eric Anholt <eric(a)anholt.net> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma/bcm2835-dma.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) --- a/drivers/dma/bcm2835-dma.c +++ b/drivers/dma/bcm2835-dma.c @@ -812,7 +812,7 @@ static int bcm2835_dma_terminate_all(str * c->desc is NULL and exit.) */ if (c->desc) { - bcm2835_dma_desc_free(&c->desc->vd); + vchan_terminate_vdesc(&c->desc->vd); c->desc = NULL; bcm2835_dma_abort(c->chan_base); @@ -836,6 +836,13 @@ static int bcm2835_dma_terminate_all(str return 0; } +static void bcm2835_dma_synchronize(struct dma_chan *chan) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + + vchan_synchronize(&c->vc); +} + static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id, int irq, unsigned int irq_flags) { @@ -942,6 +949,7 @@ static int bcm2835_dma_probe(struct plat od->ddev.device_prep_dma_memcpy = bcm2835_dma_prep_dma_memcpy; od->ddev.device_config = bcm2835_dma_slave_config; od->ddev.device_terminate_all = bcm2835_dma_terminate_all; + od->ddev.device_synchronize = bcm2835_dma_synchronize; od->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); od->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) | Patches currently in stable-queue which might be from peter.ujfalusi(a)ti.com are queue-4.9/dmaengine-bcm2835-dma-use-vchan_terminate_vdesc-instead-of-desc_free.patch

7 years, 3 months

1
0
0 0

Patch "coresight: Fixes coresight DT parse to get correct output port ID." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled coresight: Fixes coresight DT parse to get correct output port ID. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: coresight-fixes-coresight-dt-parse-to-get-correct-output-port-id.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Mike Leach <mike.leach(a)linaro.org> Date: Mon, 27 Mar 2017 11:09:33 -0600 Subject: coresight: Fixes coresight DT parse to get correct output port ID. From: Mike Leach <mike.leach(a)linaro.org> [ Upstream commit eeedc5421dd3b51de73e6106405c5c77f920f281 ] Corrected to get the port numbering to allow programmable replicator driver to operate correctly. By convention, CoreSight devices number ports, not endpoints in the .dts files:- port { reg<N> endpoint { } } Existing code read endpoint number - always 0x0, rather than the correct port number. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hwtracing/coresight/of_coresight.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/hwtracing/coresight/of_coresight.c +++ b/drivers/hwtracing/coresight/of_coresight.c @@ -149,7 +149,7 @@ struct coresight_platform_data *of_get_c continue; /* The local out port number */ - pdata->outports[i] = endpoint.id; + pdata->outports[i] = endpoint.port; /* * Get a handle on the remote port and parent Patches currently in stable-queue which might be from mike.leach(a)linaro.org are queue-4.9/coresight-fixes-coresight-dt-parse-to-get-correct-output-port-id.patch

7 years, 3 months

1
0
0 0

Patch "clk: sunxi-ng: a33: Add offset and minimum value for DDR1 PLL N factor" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: sunxi-ng: a33: Add offset and minimum value for DDR1 PLL N factor to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-sunxi-ng-a33-add-offset-and-minimum-value-for-ddr1-pll-n-factor.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Chen-Yu Tsai <wens(a)csie.org> Date: Wed, 5 Apr 2017 14:37:44 +0800 Subject: clk: sunxi-ng: a33: Add offset and minimum value for DDR1 PLL N factor From: Chen-Yu Tsai <wens(a)csie.org> [ Upstream commit 68f37d862403e8f95337b2eca90af15d0b8cd5d7 ] The DDR1 PLL on the A33 is an oddball amongst the A33 CCU clocks. It is a clock multiplier, with the effective multiplier in the range of 12 ~ 255 and no offset between the multiplier value and the value programmed into the register. Implement the zero offset and minimum value of 12 for this clock. Fixes: d05c748bd730 ("clk: sunxi-ng: Add A33 CCU support") Signed-off-by: Chen-Yu Tsai <wens(a)csie.org> Signed-off-by: Maxime Ripard <maxime.ripard(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) --- a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c +++ b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c @@ -159,13 +159,17 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK( BIT(28), /* lock */ CLK_SET_RATE_UNGATE); -/* TODO: Fix N */ -static SUNXI_CCU_N_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1", - "osc24M", 0x04c, - 8, 6, /* N */ - BIT(31), /* gate */ - BIT(28), /* lock */ - CLK_SET_RATE_UNGATE); +static struct ccu_mult pll_ddr1_clk = { + .enable = BIT(31), + .lock = BIT(28), + .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 6, 0, 12, 0), + .common = { + .reg = 0x04c, + .hw.init = CLK_HW_INIT("pll-ddr1", "osc24M", + &ccu_mult_ops, + CLK_SET_RATE_UNGATE), + }, +}; static const char * const cpux_parents[] = { "osc32k", "osc24M", "pll-cpux" , "pll-cpux" }; Patches currently in stable-queue which might be from wens(a)csie.org are queue-4.9/drm-sun4i-fix-up-error-path-cleanup-for-master-bind-function.patch queue-4.9/drm-sun4i-set-drm_crtc.port-to-the-underlying-tcon-s-output-port-node.patch queue-4.9/drm-sun4i-fix-tcon-clock-and-regmap-initialization-sequence.patch queue-4.9/clk-sunxi-ng-a33-add-offset-and-minimum-value-for-ddr1-pll-n-factor.patch

7 years, 3 months

1
0
0 0

Patch "clk: qcom: msm8996: Fix the vfe1 powerdomain name" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: qcom: msm8996: Fix the vfe1 powerdomain name to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-qcom-msm8996-fix-the-vfe1-powerdomain-name.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Rajendra Nayak <rnayak(a)codeaurora.org> Date: Thu, 23 Mar 2017 13:13:40 +0530 Subject: clk: qcom: msm8996: Fix the vfe1 powerdomain name From: Rajendra Nayak <rnayak(a)codeaurora.org> [ Upstream commit a62ca337b36e31621b582cbe8f17d9404a48e120 ] Fix a typo which caused both vfe0 and vfe1 powerdomains to be named as vfe0. Signed-off-by: Rajendra Nayak <rnayak(a)codeaurora.org> Fixes: 7e824d507909 ("clk: qcom: gdsc: Add mmcc gdscs for msm8996 family") Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Michael Turquette <mturquette(a)baylibre.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/qcom/mmcc-msm8996.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/clk/qcom/mmcc-msm8996.c +++ b/drivers/clk/qcom/mmcc-msm8996.c @@ -2984,7 +2984,7 @@ static struct gdsc vfe1_gdsc = { .cxcs = (unsigned int []){ 0x36ac }, .cxc_count = 1, .pd = { - .name = "vfe0", + .name = "vfe1", }, .parent = &camss_gdsc.pd, .pwrsts = PWRSTS_OFF_ON, Patches currently in stable-queue which might be from rnayak(a)codeaurora.org are queue-4.9/clk-qcom-msm8996-fix-the-vfe1-powerdomain-name.patch

7 years, 3 months

1
0
0 0

Patch "clk: qcom: msm8916: fix mnd_width for codec_digcodec" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: qcom: msm8916: fix mnd_width for codec_digcodec to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-qcom-msm8916-fix-mnd_width-for-codec_digcodec.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Date: Wed, 6 Dec 2017 12:11:38 +0000 Subject: clk: qcom: msm8916: fix mnd_width for codec_digcodec From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> [ Upstream commit d8e488e8242ecf129eebc440c92d800a99ca109d ] This patch fixes missing mnd_width for codec_digital clk, this is now set to 8 inline with datasheet. Fixes: 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/qcom/gcc-msm8916.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/clk/qcom/gcc-msm8916.c +++ b/drivers/clk/qcom/gcc-msm8916.c @@ -1437,6 +1437,7 @@ static const struct freq_tbl ftbl_codec_ static struct clk_rcg2 codec_digcodec_clk_src = { .cmd_rcgr = 0x1c09c, + .mnd_width = 8, .hid_width = 5, .parent_map = gcc_xo_gpll1_emclk_sleep_map, .freq_tbl = ftbl_codec_clk, Patches currently in stable-queue which might be from srinivas.kandagatla(a)linaro.org are queue-4.9/clk-qcom-msm8916-fix-mnd_width-for-codec_digcodec.patch

7 years, 3 months

1
0
0 0

Patch "clk: meson: gxbb: fix wrong clock for SARADC/SANA" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: meson: gxbb: fix wrong clock for SARADC/SANA to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-meson-gxbb-fix-wrong-clock-for-saradc-sana.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Yixun Lan <yixun.lan(a)amlogic.com> Date: Tue, 7 Nov 2017 22:12:23 +0800 Subject: clk: meson: gxbb: fix wrong clock for SARADC/SANA From: Yixun Lan <yixun.lan(a)amlogic.com> [ Upstream commit 75eccf5ed83250c0aeaeeb76f7288254ac0a87b4 ] According to the datasheet, in Meson-GXBB/GXL series, The clock gate bit for SARADC is HHI_GCLK_MPEG2 bit[22], while clock gate bit for SANA is HHI_GCLK_MPEG0 bit[10]. Test passed at gxl-s905x-p212 board. The following published datasheets are wrong and should be updated [1] GXBB v1.1.4 [2] GXL v0.3_20170314 Fixes: 738f66d3211d ("clk: gxbb: add AmLogic GXBB clk controller driver") Tested-by: Xingyu Chen <xingyu.chen(a)amlogic.com> Signed-off-by: Yixun Lan <yixun.lan(a)amlogic.com> Signed-off-by: Jerome Brunet <jbrunet(a)baylibre.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/meson/gxbb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -572,7 +572,7 @@ static MESON_GATE(gxbb_pl301, HHI_GCLK_M static MESON_GATE(gxbb_periphs, HHI_GCLK_MPEG0, 7); static MESON_GATE(gxbb_spicc, HHI_GCLK_MPEG0, 8); static MESON_GATE(gxbb_i2c, HHI_GCLK_MPEG0, 9); -static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG0, 10); +static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG0, 10); static MESON_GATE(gxbb_smart_card, HHI_GCLK_MPEG0, 11); static MESON_GATE(gxbb_rng0, HHI_GCLK_MPEG0, 12); static MESON_GATE(gxbb_uart0, HHI_GCLK_MPEG0, 13); @@ -623,7 +623,7 @@ static MESON_GATE(gxbb_usb0_ddr_bridge, static MESON_GATE(gxbb_mmc_pclk, HHI_GCLK_MPEG2, 11); static MESON_GATE(gxbb_dvin, HHI_GCLK_MPEG2, 12); static MESON_GATE(gxbb_uart2, HHI_GCLK_MPEG2, 15); -static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG2, 22); +static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG2, 22); static MESON_GATE(gxbb_vpu_intr, HHI_GCLK_MPEG2, 25); static MESON_GATE(gxbb_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26); static MESON_GATE(gxbb_clk81_a53, HHI_GCLK_MPEG2, 29); Patches currently in stable-queue which might be from yixun.lan(a)amlogic.com are queue-4.9/clk-meson-gxbb-fix-wrong-clock-for-saradc-sana.patch

7 years, 3 months

1
0
0 0

Patch "braille-console: Fix value returned by _braille_console_setup" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled braille-console: Fix value returned by _braille_console_setup to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: braille-console-fix-value-returned-by-_braille_console_setup.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Samuel Thibault <samuel.thibault(a)ens-lyon.org> Date: Sun, 26 Mar 2017 22:47:36 +0200 Subject: braille-console: Fix value returned by _braille_console_setup From: Samuel Thibault <samuel.thibault(a)ens-lyon.org> [ Upstream commit 2ed2b8621be2708c0f6d61fe9841e9ad8b9753f0 ] commit bbeddf52adc1 ("printk: move braille console support into separate braille.[ch] files") introduced _braille_console_setup() to outline the braille initialization code. There was however some confusion over the value it was supposed to return. commit 2cfe6c4ac7ee ("printk: Fix return of braille_register_console()") tried to fix it but failed to. This fixes and documents the returned value according to the use in printk.c: non-zero return means a parsing error, and thus this console configuration should be ignored. Signed-off-by: Samuel Thibault <samuel.thibault(a)ens-lyon.org> Cc: Aleksey Makarov <aleksey.makarov(a)linaro.org> Cc: Joe Perches <joe(a)perches.com> Cc: Ming Lei <ming.lei(a)canonical.com> Cc: Steven Rostedt <rostedt(a)goodmis.org> Acked-by: Petr Mladek <pmladek(a)suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/printk/braille.c | 15 ++++++++------- kernel/printk/braille.h | 13 ++++++++++--- 2 files changed, 18 insertions(+), 10 deletions(-) --- a/kernel/printk/braille.c +++ b/kernel/printk/braille.c @@ -2,12 +2,13 @@ #include <linux/kernel.h> #include <linux/console.h> +#include <linux/errno.h> #include <linux/string.h> #include "console_cmdline.h" #include "braille.h" -char *_braille_console_setup(char **str, char **brl_options) +int _braille_console_setup(char **str, char **brl_options) { if (!strncmp(*str, "brl,", 4)) { *brl_options = ""; @@ -15,14 +16,14 @@ char *_braille_console_setup(char **str, } else if (!strncmp(*str, "brl=", 4)) { *brl_options = *str + 4; *str = strchr(*brl_options, ','); - if (!*str) + if (!*str) { pr_err("need port name after brl=\n"); - else - *((*str)++) = 0; - } else - return NULL; + return -EINVAL; + } + *((*str)++) = 0; + } - return *str; + return 0; } int --- a/kernel/printk/braille.h +++ b/kernel/printk/braille.h @@ -9,7 +9,14 @@ braille_set_options(struct console_cmdli c->brl_options = brl_options; } -char * +/* + * Setup console according to braille options. + * Return -EINVAL on syntax error, 0 on success (or no braille option was + * actually given). + * Modifies str to point to the serial options + * Sets brl_options to the parsed braille options. + */ +int _braille_console_setup(char **str, char **brl_options); int @@ -25,10 +32,10 @@ braille_set_options(struct console_cmdli { } -static inline char * +static inline int _braille_console_setup(char **str, char **brl_options) { - return NULL; + return 0; } static inline int Patches currently in stable-queue which might be from samuel.thibault(a)ens-lyon.org are queue-4.9/braille-console-fix-value-returned-by-_braille_console_setup.patch queue-4.9/staging-speakup-replace-bug_on-with-warn_on.patch

7 years, 3 months

1
0
0 0

Patch "bonding: refine bond_fold_stats() wrap detection" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bonding: refine bond_fold_stats() wrap detection to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bonding-refine-bond_fold_stats-wrap-detection.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Eric Dumazet <edumazet(a)google.com> Date: Wed, 29 Mar 2017 10:45:44 -0700 Subject: bonding: refine bond_fold_stats() wrap detection From: Eric Dumazet <edumazet(a)google.com> [ Upstream commit 142c6594acbcc32391af9c15f8cd65c6c177698f ] Some device drivers reset their stats at down/up events, possibly fooling bonding stats, since they operate with relative deltas. It is nearly not possible to fix drivers, since some of them compute the tx/rx counters based on per rx/tx queue stats, and the queues can be reconfigured (ethtool -L) between the down/up sequence. Lets avoid accumulating 'negative' values that render bonding stats useless. It is better to lose small deltas, assuming the bonding stats are fetched at a reasonable frequency. Fixes: 5f0c5f73e5ef ("bonding: make global bonding stats more reliable") Signed-off-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/bonding/bond_main.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3331,12 +3331,17 @@ static void bond_fold_stats(struct rtnl_ for (i = 0; i < sizeof(*_res) / sizeof(u64); i++) { u64 nv = new[i]; u64 ov = old[i]; + s64 delta = nv - ov; /* detects if this particular field is 32bit only */ if (((nv | ov) >> 32) == 0) - res[i] += (u32)nv - (u32)ov; - else - res[i] += nv - ov; + delta = (s64)(s32)((u32)nv - (u32)ov); + + /* filter anomalies, some drivers reset their stats + * at down/up events. + */ + if (delta > 0) + res[i] += delta; } } Patches currently in stable-queue which might be from edumazet(a)google.com are queue-4.9/selinux-check-for-address-length-in-selinux_socket_bind.patch queue-4.9/bonding-refine-bond_fold_stats-wrap-detection.patch

7 years, 3 months

1
0
0 0

Patch "bonding: make speed, duplex setting consistent with link state" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bonding: make speed, duplex setting consistent with link state to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bonding-make-speed-duplex-setting-consistent-with-link-state.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Mahesh Bandewar <maheshb(a)google.com> Date: Mon, 27 Mar 2017 11:37:35 -0700 Subject: bonding: make speed, duplex setting consistent with link state From: Mahesh Bandewar <maheshb(a)google.com> [ Upstream commit c4adfc822bf5d8e97660b6114b5a8892530ce8cb ] bond_update_speed_duplex() retrieves speed and duplex settings. There is a possibility of failure in retrieving these values but caller has to assume it's always successful. This leads to having inconsistent slave link settings. If these (speed, duplex) values cannot be retrieved, then keeping the link UP causes problems. The updated bond_update_speed_duplex() returns 0 on success if it retrieves sane values for speed and duplex. On failure it returns 1 and marks the link down. Signed-off-by: Mahesh Bandewar <maheshb(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/bonding/bond_main.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -371,9 +371,10 @@ down: /* Get link speed and duplex from the slave's base driver * using ethtool. If for some reason the call fails or the * values are invalid, set speed and duplex to -1, - * and return. + * and return. Return 1 if speed or duplex settings are + * UNKNOWN; 0 otherwise. */ -static void bond_update_speed_duplex(struct slave *slave) +static int bond_update_speed_duplex(struct slave *slave) { struct net_device *slave_dev = slave->dev; struct ethtool_link_ksettings ecmd; @@ -383,24 +384,27 @@ static void bond_update_speed_duplex(str slave->duplex = DUPLEX_UNKNOWN; res = __ethtool_get_link_ksettings(slave_dev, &ecmd); - if (res < 0) - return; - - if (ecmd.base.speed == 0 || ecmd.base.speed == ((__u32)-1)) - return; - + if (res < 0) { + slave->link = BOND_LINK_DOWN; + return 1; + } + if (ecmd.base.speed == 0 || ecmd.base.speed == ((__u32)-1)) { + slave->link = BOND_LINK_DOWN; + return 1; + } switch (ecmd.base.duplex) { case DUPLEX_FULL: case DUPLEX_HALF: break; default: - return; + slave->link = BOND_LINK_DOWN; + return 1; } slave->speed = ecmd.base.speed; slave->duplex = ecmd.base.duplex; - return; + return 0; } const char *bond_slave_link_status(s8 link) Patches currently in stable-queue which might be from maheshb(a)google.com are queue-4.9/bonding-make-speed-duplex-setting-consistent-with-link-state.patch queue-4.9/ipvlan-add-l2-check-for-packets-arriving-via-virtual-devices.patch

7 years, 3 months

1
0
0 0

Patch "bnxt_en: Don't print "Link speed -1 no longer supported" messages." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnxt_en: Don't print "Link speed -1 no longer supported" messages. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnxt_en-don-t-print-link-speed-1-no-longer-supported-messages.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Michael Chan <michael.chan(a)broadcom.com> Date: Wed, 6 Dec 2017 17:31:22 -0500 Subject: bnxt_en: Don't print "Link speed -1 no longer supported" messages. From: Michael Chan <michael.chan(a)broadcom.com> [ Upstream commit a8168b6cee6e9334dfebb4b9108e8d73794f6088 ] On some dual port NICs, the 2 ports have to be configured with compatible link speeds. Under some conditions, a port's configured speed may no longer be supported. The firmware will send a message to the driver when this happens. Improve this logic that prints out the warning by only printing it if we can determine the link speed that is no longer supported. If the speed is unknown or it is in autoneg mode, skip the warning message. Reported-by: Thomas Bogendoerfer <tbogendoerfer(a)suse.de> Signed-off-by: Michael Chan <michael.chan(a)broadcom.com> Tested-by: Thomas Bogendoerfer <tbogendoerfer(a)suse.de> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1498,12 +1498,16 @@ static int bnxt_async_event_process(stru if (BNXT_VF(bp)) goto async_event_process_exit; - if (data1 & 0x20000) { + + /* print unsupported speed warning in forced speed mode only */ + if (!(link_info->autoneg & BNXT_AUTONEG_SPEED) && + (data1 & 0x20000)) { u16 fw_speed = link_info->force_link_speed; u32 speed = bnxt_fw_to_ethtool_speed(fw_speed); - netdev_warn(bp->dev, "Link speed %d no longer supported\n", - speed); + if (speed != SPEED_UNKNOWN) + netdev_warn(bp->dev, "Link speed %d no longer supported\n", + speed); } set_bit(BNXT_LINK_SPEED_CHNG_SP_EVENT, &bp->sp_event); /* fall thru */ Patches currently in stable-queue which might be from michael.chan(a)broadcom.com are queue-4.9/bnxt_en-don-t-print-link-speed-1-no-longer-supported-messages.patch

7 years, 3 months

1
0
0 0

Patch "Bluetooth: Avoid bt_accept_unlink() double unlinking" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: Avoid bt_accept_unlink() double unlinking to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-avoid-bt_accept_unlink-double-unlinking.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Dean Jenkins <Dean_Jenkins(a)mentor.com> Date: Fri, 10 Mar 2017 11:34:46 +0000 Subject: Bluetooth: Avoid bt_accept_unlink() double unlinking From: Dean Jenkins <Dean_Jenkins(a)mentor.com> [ Upstream commit 27bfbc21a0c0f711fa5382de026c7c0700c9ea28 ] There is a race condition between a thread calling bt_accept_dequeue() and a different thread calling bt_accept_unlink(). Protection against concurrency is implemented using sk locking. However, sk locking causes serialisation of the bt_accept_dequeue() and bt_accept_unlink() threads. This serialisation can cause bt_accept_dequeue() to obtain the sk from the parent list but becomes blocked waiting for the sk lock held by the bt_accept_unlink() thread. bt_accept_unlink() unlinks sk and this thread releases the sk lock unblocking bt_accept_dequeue() which potentially runs bt_accept_unlink() again on the same sk causing a crash. The attempt to double unlink the same sk from the parent list can cause a NULL pointer dereference crash due to bt_sk(sk)->parent becoming NULL on the first unlink, followed by the second unlink trying to execute bt_sk(sk)->parent->sk_ack_backlog-- in bt_accept_unlink() which crashes. When sk is in the parent list, bt_sk(sk)->parent will be not be NULL. When sk is removed from the parent list, bt_sk(sk)->parent is set to NULL. Therefore, add a defensive check for bt_sk(sk)->parent not being NULL to ensure that sk is still in the parent list after the sk lock has been taken in bt_accept_dequeue(). If bt_sk(sk)->parent is detected as being NULL then restart the loop so that the loop variables are refreshed to use the latest values. This is necessary as list_for_each_entry_safe() is not thread safe so causing a risk of an infinite loop occurring as sk could point to itself. In addition, in bt_accept_dequeue() increase the sk reference count to protect against early freeing of sk. Early freeing can be possible if the bt_accept_unlink() thread calls l2cap_sock_kill() or rfcomm_sock_kill() functions before bt_accept_dequeue() gets the sk lock. For test purposes, the probability of failure can be increased by putting a msleep of 1 second in bt_accept_dequeue() between getting the sk and waiting for the sk lock. This exposes the fact that the loop list_for_each_entry_safe(p, n, &bt_sk(parent)->accept_q) is not safe from threads that unlink sk from the list in parallel with the loop which can cause sk to become stale within the loop. Signed-off-by: Dean Jenkins <Dean_Jenkins(a)mentor.com> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/bluetooth/af_bluetooth.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -163,6 +163,9 @@ void bt_accept_enqueue(struct sock *pare } EXPORT_SYMBOL(bt_accept_enqueue); +/* Calling function must hold the sk lock. + * bt_sk(sk)->parent must be non-NULL meaning sk is in the parent list. + */ void bt_accept_unlink(struct sock *sk) { BT_DBG("sk %p state %d", sk, sk->sk_state); @@ -181,11 +184,32 @@ struct sock *bt_accept_dequeue(struct so BT_DBG("parent %p", parent); +restart: list_for_each_entry_safe(s, n, &bt_sk(parent)->accept_q, accept_q) { sk = (struct sock *)s; + /* Prevent early freeing of sk due to unlink and sock_kill */ + sock_hold(sk); lock_sock(sk); + /* Check sk has not already been unlinked via + * bt_accept_unlink() due to serialisation caused by sk locking + */ + if (!bt_sk(sk)->parent) { + BT_DBG("sk %p, already unlinked", sk); + release_sock(sk); + sock_put(sk); + + /* Restart the loop as sk is no longer in the list + * and also avoid a potential infinite loop because + * list_for_each_entry_safe() is not thread safe. + */ + goto restart; + } + + /* sk is safely in the parent list so reduce reference count */ + sock_put(sk); + /* FIXME: Is this check still needed */ if (sk->sk_state == BT_CLOSED) { bt_accept_unlink(sk); Patches currently in stable-queue which might be from Dean_Jenkins(a)mentor.com are queue-4.9/bluetooth-avoid-bt_accept_unlink-double-unlinking.patch

7 years, 3 months

1
0
0 0

Patch "Bluetooth: 6lowpan: fix delay work init in add_peer_chan()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: 6lowpan: fix delay work init in add_peer_chan() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-6lowpan-fix-delay-work-init-in-add_peer_chan.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Michael Scott <michael.scott(a)linaro.org> Date: Tue, 28 Mar 2017 23:10:54 -0700 Subject: Bluetooth: 6lowpan: fix delay work init in add_peer_chan() From: Michael Scott <michael.scott(a)linaro.org> [ Upstream commit d2891c4d071d807f01cc911dc42a68f4568d65cf ] When adding 6lowpan devices very rapidly we sometimes see a crash: [23122.306615] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0-43-arm64 #1 Debian 4.9.9.linaro.43-1 [23122.315400] Hardware name: HiKey Development Board (DT) [23122.320623] task: ffff800075443080 task.stack: ffff800075484000 [23122.326551] PC is at expire_timers+0x70/0x150 [23122.330907] LR is at run_timer_softirq+0xa0/0x1a0 [23122.335616] pc : [<ffff000008142dd8>] lr : [<ffff000008142f58>] pstate: 600001c5 This was due to add_peer_chan() unconditionally initializing the lowpan_btle_dev->notify_peers delayed work structure, even if the lowpan_btle_dev passed into add_peer_chan() had previously been initialized. Normally, this would go unnoticed as the delayed work timer is set for 100 msec, however when calling add_peer_chan() faster than 100 msec it clears out a previously queued delay work causing the crash above. To fix this, let add_peer_chan() know when a new lowpan_btle_dev is passed in so that it only performs the delay work initialization when needed. Signed-off-by: Michael Scott <michael.scott(a)linaro.org> Acked-by: Jukka Rissanen <jukka.rissanen(a)linux.intel.com> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/bluetooth/6lowpan.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/net/bluetooth/6lowpan.c +++ b/net/bluetooth/6lowpan.c @@ -755,7 +755,8 @@ static void set_ip_addr_bits(u8 addr_typ } static struct l2cap_chan *add_peer_chan(struct l2cap_chan *chan, - struct lowpan_btle_dev *dev) + struct lowpan_btle_dev *dev, + bool new_netdev) { struct lowpan_peer *peer; @@ -786,7 +787,8 @@ static struct l2cap_chan *add_peer_chan( spin_unlock(&devices_lock); /* Notifying peers about us needs to be done without locks held */ - INIT_DELAYED_WORK(&dev->notify_peers, do_notify_peers); + if (new_netdev) + INIT_DELAYED_WORK(&dev->notify_peers, do_notify_peers); schedule_delayed_work(&dev->notify_peers, msecs_to_jiffies(100)); return peer->chan; @@ -843,6 +845,7 @@ out: static inline void chan_ready_cb(struct l2cap_chan *chan) { struct lowpan_btle_dev *dev; + bool new_netdev = false; dev = lookup_dev(chan->conn); @@ -853,12 +856,13 @@ static inline void chan_ready_cb(struct l2cap_chan_del(chan, -ENOENT); return; } + new_netdev = true; } if (!try_module_get(THIS_MODULE)) return; - add_peer_chan(chan, dev); + add_peer_chan(chan, dev, new_netdev); ifup(dev->netdev); } Patches currently in stable-queue which might be from michael.scott(a)linaro.org are queue-4.9/bluetooth-6lowpan-fix-delay-work-init-in-add_peer_chan.patch

7 years, 3 months

1
0
0 0

Patch "blk-throttle: make sure expire time isn't too big" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled blk-throttle: make sure expire time isn't too big to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: blk-throttle-make-sure-expire-time-isn-t-too-big.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Shaohua Li <shli(a)fb.com> Date: Mon, 27 Mar 2017 10:51:36 -0700 Subject: blk-throttle: make sure expire time isn't too big From: Shaohua Li <shli(a)fb.com> [ Upstream commit 06cceedcca67a93ac7f7aa93bbd9980c7496d14e ] cgroup could be throttled to a limit but when all cgroups cross high limit, queue enters a higher state and so the group should be throttled to a higher limit. It's possible the cgroup is sleeping because of throttle and other cgroups don't dispatch IO any more. In this case, nobody can trigger current downgrade/upgrade logic. To fix this issue, we could either set up a timer to wakeup the cgroup if other cgroups are idle or make sure this cgroup doesn't sleep too long. Setting up a timer means we must change the timer very frequently. This patch chooses the latter. Making cgroup sleep time not too big wouldn't change cgroup bps/iops, but could make it wakeup more frequently, which isn't a big issue because throtl_slice * 8 is already quite big. Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/blk-throttle.c | 11 +++++++++++ 1 file changed, 11 insertions(+) --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -499,6 +499,17 @@ static void throtl_dequeue_tg(struct thr static void throtl_schedule_pending_timer(struct throtl_service_queue *sq, unsigned long expires) { + unsigned long max_expire = jiffies + 8 * throtl_slice; + + /* + * Since we are adjusting the throttle limit dynamically, the sleep + * time calculated according to previous limit might be invalid. It's + * possible the cgroup sleep time is very long and no other cgroups + * have IO running so notify the limit changes. Make sure the cgroup + * doesn't sleep too long to avoid the missed notification. + */ + if (time_after(expires, max_expire)) + expires = max_expire; mod_timer(&sq->pending_timer, expires); throtl_log(sq, "schedule timer. delay=%lu jiffies=%lu", expires - jiffies, jiffies); Patches currently in stable-queue which might be from shli(a)fb.com are queue-4.9/md.c-didn-t-unlock-the-mddev-before-return-einval-in-array_size_store.patch queue-4.9/md-raid6-fix-anomily-when-recovering-a-single-device-in-raid6.patch queue-4.9/blk-throttle-make-sure-expire-time-isn-t-too-big.patch

7 years, 3 months

1
0
0 0

Patch "batman-adv: handle race condition for claims between gateways" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled batman-adv: handle race condition for claims between gateways to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: batman-adv-handle-race-condition-for-claims-between-gateways.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Andreas Pape <APape(a)phoenixcontact.com> Date: Mon, 5 Sep 2016 13:20:29 +0200 Subject: batman-adv: handle race condition for claims between gateways From: Andreas Pape <APape(a)phoenixcontact.com> [ Upstream commit a3a5129e122709306cfa6409781716c2933df99b ] Consider the following situation which has been found in a test setup: Gateway B has claimed client C and gateway A has the same backbone network as B. C sends a broad- or multicast to B and directly after this packet decides to send another packet to A due to a better TQ value. B will forward the broad-/multicast into the backbone as it is the responsible gw and after that A will claim C as it has been chosen by C as the best gateway. If it now happens that A claims C before it has received the broad-/multicast forwarded by B (due to backbone topology or due to some delay in B when forwarding the packet) we get a critical situation: in the current code A will immediately unclaim C when receiving the multicast due to the roaming client scenario although the position of C has not changed in the mesh. If this happens the multi-/broadcast forwarded by B will be sent back into the mesh by A and we have looping packets until one of the gateways claims C again. In order to prevent this, unclaiming of a client due to the roaming client scenario is only done after a certain time is expired after the last claim of the client. 100 ms are used here, which should be slow enough for big backbones and slow gateways but fast enough not to break the roaming client use case. Acked-by: Simon Wunderlich <sw(a)simonwunderlich.de> Signed-off-by: Andreas Pape <apape(a)phoenixcontact.com> [sven(a)narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/batman-adv/bridge_loop_avoidance.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1964,10 +1964,22 @@ bool batadv_bla_tx(struct batadv_priv *b /* if yes, the client has roamed and we have * to unclaim it. */ - batadv_handle_unclaim(bat_priv, primary_if, - primary_if->net_dev->dev_addr, - ethhdr->h_source, vid); - goto allow; + if (batadv_has_timed_out(claim->lasttime, 100)) { + /* only unclaim if the last claim entry is + * older than 100 ms to make sure we really + * have a roaming client here. + */ + batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla_tx(): Roaming client %pM detected. Unclaim it.\n", + ethhdr->h_source); + batadv_handle_unclaim(bat_priv, primary_if, + primary_if->net_dev->dev_addr, + ethhdr->h_source, vid); + goto allow; + } else { + batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla_tx(): Race for claim %pM detected. Drop packet.\n", + ethhdr->h_source); + goto handled; + } } /* check if it is a multicast/broadcast frame */ Patches currently in stable-queue which might be from APape(a)phoenixcontact.com are queue-4.9/batman-adv-handle-race-condition-for-claims-between-gateways.patch

7 years, 3 months

1
0
0 0

Patch "ath10k: update tdls teardown state to target" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: update tdls teardown state to target to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-update-tdls-teardown-state-to-target.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Manikanta Pubbisetty <mpubbise(a)qti.qualcomm.com> Date: Mon, 6 Nov 2017 13:39:31 +0530 Subject: ath10k: update tdls teardown state to target From: Manikanta Pubbisetty <mpubbise(a)qti.qualcomm.com> [ Upstream commit 424ea0d174e82365f85c6770225dba098b8f1d5f ] It is required to update the teardown state of the peer when a tdls link with that peer is terminated. This information is useful for the target to perform some cleanups wrt the tdls peer. Without proper cleanup, target assumes that the peer is connected and blocks future connection requests, updating the teardown state of the peer addresses the problem. Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version. Signed-off-by: Manikanta Pubbisetty <mpubbise(a)qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/mac.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -6054,6 +6054,16 @@ static int ath10k_sta_state(struct ieee8 "mac vdev %d peer delete %pM sta %pK (sta gone)\n", arvif->vdev_id, sta->addr, sta); + if (sta->tdls) { + ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, + sta, + WMI_TDLS_PEER_STATE_TEARDOWN); + if (ret) + ath10k_warn(ar, "failed to update tdls peer state for %pM state %d: %i\n", + sta->addr, + WMI_TDLS_PEER_STATE_TEARDOWN, ret); + } + ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); if (ret) ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n", Patches currently in stable-queue which might be from mpubbise(a)qti.qualcomm.com are queue-4.9/ath10k-update-tdls-teardown-state-to-target.patch

7 years, 3 months

1
0
0 0

Patch "ath10k: fix invalid STS_CAP_OFFSET_MASK" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: fix invalid STS_CAP_OFFSET_MASK to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-fix-invalid-sts_cap_offset_mask.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Ben Greear <greearb(a)candelatech.com> Date: Sat, 2 Dec 2017 16:50:49 +0200 Subject: ath10k: fix invalid STS_CAP_OFFSET_MASK From: Ben Greear <greearb(a)candelatech.com> [ Upstream commit 8cec57f5277ef0e354e37a0bf909dc71bc1f865b ] The 10.4 firmware defines this as a 3-bit field, as does the mac80211 stack. The 4th bit is defined as CONF_IMPLICIT_BF at least in the firmware header I have seen. This patch fixes the ath10k wmi header to match the firmware. Signed-off-by: Ben Greear <greearb(a)candelatech.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/wmi.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -5017,7 +5017,8 @@ enum wmi_10_4_vdev_param { #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 -#define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0 +#define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 +#define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 Patches currently in stable-queue which might be from greearb(a)candelatech.com are queue-4.9/ath10k-fix-invalid-sts_cap_offset_mask.patch

7 years, 3 months

1
0
0 0

Patch "ath10k: fix fetching channel during potential radar detection" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: fix fetching channel during potential radar detection to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-fix-fetching-channel-during-potential-radar-detection.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Date: Wed, 8 Mar 2017 18:03:32 +0530 Subject: ath10k: fix fetching channel during potential radar detection From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> [ Upstream commit a28f6f27a88f047f03f04b9246ca260ebc91455e ] Fetch target operating channel during potential radar detection when the interface is just brought up, but no channel is assigned from userspace. In this scenario rx_channel may not be having a valid pointer hence fetch the target operating channel to avoid warnings as below which can be triggered by the commands with DFS testing over longer run comamnds: iw wlan1 set type mesh ifconfig wlan1 up (valid tgt_oper_chan only) iw wlan1 cac trigger freq 5260 HT20 (valid rx_channel, tgt_oper_chan) iw wlan1 cac trigger freq 5280 HT20 iw wlan1 cac trigger freq 5300 HT20 Once the CAC expires, current channel context will be removed and we are only left with the fallback option of using 'target operating channel' Firmware and driver log: ath: phy1: DFS: radar found on freq=5300: id=1, pri=1125, count=5, count_false=4 ath: phy1: DFS: radar found on freq=5260: id=5, pri=3151, count=6, count_false=11 ath: phy1: DFS: radar found on freq=5280: id=1, pri=1351, count=6, count_false=4 ath: phy1: DFS: radar found on freq=5300: id=1, pri=1125, count=5, count_false=4 ath10k_pci 0001:01:00.0: failed to derive channel for radar pulse, treating as radar ath10k_pci 0001:01:00.0: failed to derive channel for radar pulse, treating as radar Call trace: WARNING: CPU: 1 PID: 2145 at backports-20161201-3.14.77-9ab3068/net/wireless/chan.c:265 cfg80211_set_dfs_state+0x3c/0x88 [cfg80211]() Workqueue: phy1 ieee80211_dfs_radar_detected_work [mac80211] [<c0320770>] (warn_slowpath_null) from [<bf79b90c>] (cfg80211_set_dfs_state+0x3c/0x88 [cfg80211]) [<bf79b90c>] (cfg80211_set_dfs_state [cfg80211]) from [<bf79697c>] (cfg80211_radar_event+0xc4/0x140 [cfg80211]) [<bf79697c>] (cfg80211_radar_event [cfg80211]) from [<bf83c058>] (ieee80211_dfs_radar_detected_work+0xa8/0xb4 [mac80211]) [<bf83c058>] (ieee80211_dfs_radar_detected_work [mac80211]) from [<c0339518>] (process_one_work+0x298/0x4a4) Signed-off-by: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/wmi.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -3638,6 +3638,11 @@ static void ath10k_dfs_radar_report(stru spin_lock_bh(&ar->data_lock); ch = ar->rx_channel; + + /* fetch target operating channel during channel change */ + if (!ch) + ch = ar->tgt_oper_chan; + spin_unlock_bh(&ar->data_lock); if (!ch) { Patches currently in stable-queue which might be from mohammed(a)qti.qualcomm.com are queue-4.9/ath10k-fix-fetching-channel-during-potential-radar-detection.patch queue-4.9/ath10k-fix-compile-time-sanity-check-for-ce4-buffer-size.patch queue-4.9/ath10k-fix-a-warning-during-channel-switch-with-multiple-vaps.patch queue-4.9/ath10k-disallow-dfs-simulation-if-dfs-channel-is-not-enabled.patch

7 years, 3 months

1
0
0 0

Patch "ath10k: fix compile time sanity check for CE4 buffer size" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: fix compile time sanity check for CE4 buffer size to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-fix-compile-time-sanity-check-for-ce4-buffer-size.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Date: Tue, 4 Apr 2017 22:22:56 +0530 Subject: ath10k: fix compile time sanity check for CE4 buffer size From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> [ Upstream commit 62ca0690cd495bb7c1414cdf0cf790c2922a1d79 ] In 'ath10k_ce_alloc_pipe' the compile time sanity check to ensure that there is sufficient buffers in CE4 for HTT Tx MSDU descriptors, but this did not take into account of the case with 'peer flow control' enabled, fix this. Cc: Michal Kazior <michal.kazior(a)tieto.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/ce.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -1059,7 +1059,7 @@ int ath10k_ce_alloc_pipe(struct ath10k * */ BUILD_BUG_ON(2 * TARGET_NUM_MSDU_DESC > (CE_HTT_H2T_MSG_SRC_NENTRIES - 1)); - BUILD_BUG_ON(2 * TARGET_10X_NUM_MSDU_DESC > + BUILD_BUG_ON(2 * TARGET_10_4_NUM_MSDU_DESC_PFC > (CE_HTT_H2T_MSG_SRC_NENTRIES - 1)); BUILD_BUG_ON(2 * TARGET_TLV_NUM_MSDU_DESC > (CE_HTT_H2T_MSG_SRC_NENTRIES - 1)); Patches currently in stable-queue which might be from mohammed(a)qti.qualcomm.com are queue-4.9/ath10k-fix-fetching-channel-during-potential-radar-detection.patch queue-4.9/ath10k-fix-compile-time-sanity-check-for-ce4-buffer-size.patch queue-4.9/ath10k-fix-a-warning-during-channel-switch-with-multiple-vaps.patch queue-4.9/ath10k-disallow-dfs-simulation-if-dfs-channel-is-not-enabled.patch

7 years, 3 months

1
0
0 0

Patch "ath10k: fix a warning during channel switch with multiple vaps" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: fix a warning during channel switch with multiple vaps to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-fix-a-warning-during-channel-switch-with-multiple-vaps.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Date: Wed, 8 Mar 2017 13:52:06 +0200 Subject: ath10k: fix a warning during channel switch with multiple vaps From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> [ Upstream commit c73f8c00330f59ce9b1ace9ff698aca83390d358 ] Doing a channel switch via hostapd_cli seems to update the new channel context for each VAP's appropriately as below in 'ath10k_mac_update_vif_chan', hence we can safely suppress the warning that shows up during this operation and dump the warning only if no vaps are available for channel switch hostapd_cli -i wlan0 chan_switch 5 5200 OK ath10k_pci : mac chanctx switch n_vifs 3 mode 1 ath10k_pci : mac chanctx switch vdev_id 2 freq 5180->5200 width 0->0 ath10k_pci : mac chanctx switch vdev_id 1 freq 5180->5200 width 0->0 ath10k_pci : mac chanctx switch vdev_id 0 freq 5180->5200 width 0->0 Call Trace: WARNING: backports-20161201-3.14.77-9ab3068/drivers/net/wireless/ath/ath10k/mac.c:7126 [<c022f2d4>] (warn_slowpath_null) from [<bf7f150c>] (ath10k_reconfig_complete+0xe4/0x25c [ath10k_core]) [<bf7f150c>] (ath10k_reconfig_complete [ath10k_core]) [<bf7f35f0>] (ath10k_mac_vif_ap_csa_work+0x214/0x370 [ath10k_core]) [<bf7f38b8>] (ath10k_mac_op_change_chanctx+0x108/0x128 [ath10k_core]) [<bf782ac0>] (ieee80211_recalc_chanctx_min_def+0x30c/0x430 [mac80211]) [<bf7830a4>] (ieee80211_recalc_smps_chanctx+0x2ec/0x840 [mac80211]) [<bf7843e8>] (ieee80211_vif_use_reserved_context+0x7c/0xf8 [mac80211]) [<bf7843e8>] (ieee80211_vif_use_reserved_context [mac80211]) [<bf76e5d4>] (ieee80211_csa_finalize_work+0x5c/0x88 [mac80211]) Fixes: d7bf4b4aba05 ("ath10k: fix ar->rx_channel updating logic") Signed-off-by: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -7070,7 +7070,7 @@ ath10k_mac_update_rx_channel(struct ath1 lockdep_assert_held(&ar->data_lock); WARN_ON(ctx && vifs); - WARN_ON(vifs && n_vifs != 1); + WARN_ON(vifs && !n_vifs); /* FIXME: Sort of an optimization and a workaround. Peers and vifs are * on a linked list now. Doing a lookup peer -> vif -> chanctx for each Patches currently in stable-queue which might be from mohammed(a)qti.qualcomm.com are queue-4.9/ath10k-fix-fetching-channel-during-potential-radar-detection.patch queue-4.9/ath10k-fix-compile-time-sanity-check-for-ce4-buffer-size.patch queue-4.9/ath10k-fix-a-warning-during-channel-switch-with-multiple-vaps.patch queue-4.9/ath10k-disallow-dfs-simulation-if-dfs-channel-is-not-enabled.patch

7 years, 3 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror