- Linux-stable-mirror - lists.linaro.org

Patch "spi: atmel: fixed spin_lock usage inside atmel_spi_remove" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled spi: atmel: fixed spin_lock usage inside atmel_spi_remove to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: spi-atmel-fixed-spin_lock-usage-inside-atmel_spi_remove.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Radu Pirea <radu.pirea(a)microchip.com> Date: Fri, 15 Dec 2017 17:40:17 +0200 Subject: spi: atmel: fixed spin_lock usage inside atmel_spi_remove From: Radu Pirea <radu.pirea(a)microchip.com> [ Upstream commit 66e900a3d225575c8b48b59ae1fe74bb6e5a65cc ] The only part of atmel_spi_remove which needs to be atomic is hardware reset. atmel_spi_stop_dma calls dma_terminate_all and this needs interrupts enabled. atmel_spi_release_dma calls dma_release_channel and dma_release_channel locks a mutex inside of spin_lock. So the call of these functions can't be inside a spin_lock. Reported-by: Jia-Ju Bai <baijiaju1990(a)gmail.com> Signed-off-by: Radu Pirea <radu.pirea(a)microchip.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/spi/spi-atmel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1669,12 +1669,12 @@ static int atmel_spi_remove(struct platf pm_runtime_get_sync(&pdev->dev); /* reset the hardware and block queue progress */ - spin_lock_irq(&as->lock); if (as->use_dma) { atmel_spi_stop_dma(as); atmel_spi_release_dma(as); } + spin_lock_irq(&as->lock); spi_writel(as, CR, SPI_BIT(SWRST)); spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_readl(as, SR); Patches currently in stable-queue which might be from radu.pirea(a)microchip.com are queue-4.9/spi-atmel-fixed-spin_lock-usage-inside-atmel_spi_remove.patch

7 years, 4 months

1
0
0 0

Patch "SolutionEngine771x: fix Ether platform data" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled SolutionEngine771x: fix Ether platform data to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: solutionengine771x-fix-ether-platform-data.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Sergei Shtylyov <sergei.shtylyov(a)cogentembedded.com> Date: Sat, 6 Jan 2018 21:53:26 +0300 Subject: SolutionEngine771x: fix Ether platform data From: Sergei Shtylyov <sergei.shtylyov(a)cogentembedded.com> [ Upstream commit 195e2addbce09e5afbc766efc1e6567c9ce840d3 ] The 'sh_eth' driver's probe() method would fail on the SolutionEngine7710 board and crash on SolutionEngine7712 board as the platform code is hopelessly behind the driver's platform data -- it passes the PHY address instead of 'struct sh_eth_plat_data *'; pass the latter to the driver in order to fix the bug... Fixes: 71557a37adb5 ("[netdrvr] sh_eth: Add SH7619 support") Signed-off-by: Sergei Shtylyov <sergei.shtylyov(a)cogentembedded.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/sh/boards/mach-se/770x/setup.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) --- a/arch/sh/boards/mach-se/770x/setup.c +++ b/arch/sh/boards/mach-se/770x/setup.c @@ -8,6 +8,7 @@ */ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/sh_eth.h> #include <mach-se/mach/se.h> #include <mach-se/mach/mrshpc.h> #include <asm/machvec.h> @@ -114,6 +115,11 @@ static struct platform_device heartbeat_ #if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ defined(CONFIG_CPU_SUBTYPE_SH7712) /* SH771X Ethernet driver */ +static struct sh_eth_plat_data sh_eth_plat = { + .phy = PHY_ID, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + static struct resource sh_eth0_resources[] = { [0] = { .start = SH_ETH0_BASE, @@ -131,7 +137,7 @@ static struct platform_device sh_eth0_de .name = "sh771x-ether", .id = 0, .dev = { - .platform_data = PHY_ID, + .platform_data = &sh_eth_plat, }, .num_resources = ARRAY_SIZE(sh_eth0_resources), .resource = sh_eth0_resources, @@ -154,7 +160,7 @@ static struct platform_device sh_eth1_de .name = "sh771x-ether", .id = 1, .dev = { - .platform_data = PHY_ID, + .platform_data = &sh_eth_plat, }, .num_resources = ARRAY_SIZE(sh_eth1_resources), .resource = sh_eth1_resources, Patches currently in stable-queue which might be from sergei.shtylyov(a)cogentembedded.com are queue-4.9/solutionengine771x-fix-ether-platform-data.patch

7 years, 4 months

1
0
0 0

Patch "sget(): handle failures of register_shrinker()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sget(): handle failures of register_shrinker() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sget-handle-failures-of-register_shrinker.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Al Viro <viro(a)zeniv.linux.org.uk> Date: Mon, 18 Dec 2017 15:05:07 -0500 Subject: sget(): handle failures of register_shrinker() From: Al Viro <viro(a)zeniv.linux.org.uk> [ Upstream commit 9ee332d99e4d5a97548943b81c54668450ce641b ] Signed-off-by: Al Viro <viro(a)zeniv.linux.org.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/super.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/fs/super.c +++ b/fs/super.c @@ -519,7 +519,11 @@ retry: hlist_add_head(&s->s_instances, &type->fs_supers); spin_unlock(&sb_lock); get_filesystem(type); - register_shrinker(&s->s_shrink); + err = register_shrinker(&s->s_shrink); + if (err) { + deactivate_locked_super(s); + s = ERR_PTR(err); + } return s; } Patches currently in stable-queue which might be from viro(a)zeniv.linux.org.uk are queue-4.9/sget-handle-failures-of-register_shrinker.patch

7 years, 4 months

1
0
0 0

Patch "sctp: make use of pre-calculated len" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sctp: make use of pre-calculated len to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sctp-make-use-of-pre-calculated-len.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Marcelo Ricardo Leitner <marcelo.leitner(a)gmail.com> Date: Mon, 8 Jan 2018 19:02:29 -0200 Subject: sctp: make use of pre-calculated len From: Marcelo Ricardo Leitner <marcelo.leitner(a)gmail.com> [ Upstream commit c76f97c99ae6d26d14c7f0e50e074382bfbc9f98 ] Some sockopt handling functions were calculating the length of the buffer to be written to userspace and then calculating it again when actually writing the buffer, which could lead to some write not using an up-to-date length. This patch updates such places to just make use of the len variable. Also, replace some sizeof(type) to sizeof(var). Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/sctp/socket.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4765,7 +4765,7 @@ static int sctp_getsockopt_autoclose(str len = sizeof(int); if (put_user(len, optlen)) return -EFAULT; - if (copy_to_user(optval, &sctp_sk(sk)->autoclose, sizeof(int))) + if (copy_to_user(optval, &sctp_sk(sk)->autoclose, len)) return -EFAULT; return 0; } @@ -5342,6 +5342,9 @@ copy_getaddrs: err = -EFAULT; goto out; } + /* XXX: We should have accounted for sizeof(struct sctp_getaddrs) too, + * but we can't change it anymore. + */ if (put_user(bytes_copied, optlen)) err = -EFAULT; out: @@ -5778,7 +5781,7 @@ static int sctp_getsockopt_maxseg(struct params.assoc_id = 0; } else if (len >= sizeof(struct sctp_assoc_value)) { len = sizeof(struct sctp_assoc_value); - if (copy_from_user(&params, optval, sizeof(params))) + if (copy_from_user(&params, optval, len)) return -EFAULT; } else return -EINVAL; @@ -5947,7 +5950,9 @@ static int sctp_getsockopt_active_key(st if (len < sizeof(struct sctp_authkeyid)) return -EINVAL; - if (copy_from_user(&val, optval, sizeof(struct sctp_authkeyid))) + + len = sizeof(struct sctp_authkeyid); + if (copy_from_user(&val, optval, len)) return -EFAULT; asoc = sctp_id2assoc(sk, val.scact_assoc_id); @@ -5959,7 +5964,6 @@ static int sctp_getsockopt_active_key(st else val.scact_keynumber = ep->active_key_id; - len = sizeof(struct sctp_authkeyid); if (put_user(len, optlen)) return -EFAULT; if (copy_to_user(optval, &val, len)) @@ -5985,7 +5989,7 @@ static int sctp_getsockopt_peer_auth_chu if (len < sizeof(struct sctp_authchunks)) return -EINVAL; - if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks))) + if (copy_from_user(&val, optval, sizeof(val))) return -EFAULT; to = p->gauth_chunks; @@ -6030,7 +6034,7 @@ static int sctp_getsockopt_local_auth_ch if (len < sizeof(struct sctp_authchunks)) return -EINVAL; - if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks))) + if (copy_from_user(&val, optval, sizeof(val))) return -EFAULT; to = p->gauth_chunks; Patches currently in stable-queue which might be from marcelo.leitner(a)gmail.com are queue-4.9/sctp-make-use-of-pre-calculated-len.patch

7 years, 4 months

1
0
0 0

Patch "scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-storvsc-fix-scsi_cmd-error-assignments-in-storvsc_handle_error.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Cathy Avery <cavery(a)redhat.com> Date: Tue, 19 Dec 2017 13:32:48 -0500 Subject: scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error From: Cathy Avery <cavery(a)redhat.com> [ Upstream commit d1b8b2391c24751e44f618fcf86fb55d9a9247fd ] When an I/O is returned with an srb_status of SRB_STATUS_INVALID_LUN which has zero good_bytes it must be assigned an error. Otherwise the I/O will be continuously requeued and will cause a deadlock in the case where disks are being hot added and removed. sd_probe_async will wait forever for its I/O to complete while holding scsi_sd_probe_domain. Also returning the default error of DID_TARGET_FAILURE causes multipath to not retry the I/O resulting in applications receiving I/O errors before a failover can occur. Signed-off-by: Cathy Avery <cavery(a)redhat.com> Signed-off-by: Long Li <longli(a)microsoft.com> Reviewed-by: Stephen Hemminger <stephen(a)networkplumber.org> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/storvsc_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -915,10 +915,11 @@ static void storvsc_handle_error(struct case TEST_UNIT_READY: break; default: - set_host_byte(scmnd, DID_TARGET_FAILURE); + set_host_byte(scmnd, DID_ERROR); } break; case SRB_STATUS_INVALID_LUN: + set_host_byte(scmnd, DID_NO_CONNECT); do_work = true; process_err_fn = storvsc_remove_lun; break; Patches currently in stable-queue which might be from cavery(a)redhat.com are queue-4.9/scsi-storvsc-fix-scsi_cmd-error-assignments-in-storvsc_handle_error.patch

7 years, 4 months

1
0
0 0

Patch "s390/dasd: fix wrongly assigned configuration data" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/dasd: fix wrongly assigned configuration data to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-dasd-fix-wrongly-assigned-configuration-data.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Stefan Haberland <sth(a)linux.vnet.ibm.com> Date: Wed, 6 Dec 2017 10:30:39 +0100 Subject: s390/dasd: fix wrongly assigned configuration data From: Stefan Haberland <sth(a)linux.vnet.ibm.com> [ Upstream commit 8a9bd4f8ebc6800bfc0596e28631ff6809a2f615 ] We store per path and per device configuration data to identify the path or device correctly. The per path configuration data might get mixed up if the original request gets into error recovery and is started with a random path mask. This would lead to a wrong identification of a path in case of a CUIR event for example. Fix by copying the path mask from the original request to the error recovery request in case it is a path verification request. Signed-off-by: Stefan Haberland <sth(a)linux.vnet.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner(a)linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/block/dasd_3990_erp.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/drivers/s390/block/dasd_3990_erp.c +++ b/drivers/s390/block/dasd_3990_erp.c @@ -2755,6 +2755,16 @@ dasd_3990_erp_action(struct dasd_ccw_req erp = dasd_3990_erp_handle_match_erp(cqr, erp); } + + /* + * For path verification work we need to stick with the path that was + * originally chosen so that the per path configuration data is + * assigned correctly. + */ + if (test_bit(DASD_CQR_VERIFY_PATH, &erp->flags) && cqr->lpm) { + erp->lpm = cqr->lpm; + } + if (device->features & DASD_FEATURE_ERPLOG) { /* print current erp_chain */ dev_err(&device->cdev->dev, Patches currently in stable-queue which might be from sth(a)linux.vnet.ibm.com are queue-4.9/s390-dasd-fix-wrongly-assigned-configuration-data.patch

7 years, 4 months

1
0
0 0

Patch "nvme: check hw sectors before setting chunk sectors" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nvme: check hw sectors before setting chunk sectors to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nvme-check-hw-sectors-before-setting-chunk-sectors.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Keith Busch <keith.busch(a)intel.com> Date: Thu, 14 Dec 2017 11:20:14 -0700 Subject: nvme: check hw sectors before setting chunk sectors From: Keith Busch <keith.busch(a)intel.com> [ Upstream commit 249159c5f15812140fa216f9997d799ac0023a1f ] Some devices with IDs matching the "stripe" quirk don't actually have this quirk, and don't have an MDTS value. When MDTS is not set, the driver sets the max sectors to UINT_MAX, which is not a power of 2, hitting a BUG_ON from blk_queue_chunk_sectors. This patch skips setting chunk sectors for such devices. Signed-off-by: Keith Busch <keith.busch(a)intel.com> Reviewed-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/nvme/host/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1204,7 +1204,8 @@ static void nvme_set_queue_limits(struct blk_queue_max_hw_sectors(q, ctrl->max_hw_sectors); blk_queue_max_segments(q, min_t(u32, max_segments, USHRT_MAX)); } - if (ctrl->quirks & NVME_QUIRK_STRIPE_SIZE) + if ((ctrl->quirks & NVME_QUIRK_STRIPE_SIZE) && + is_power_of_2(ctrl->max_hw_sectors)) blk_queue_chunk_sectors(q, ctrl->max_hw_sectors); blk_queue_virt_boundary(q, ctrl->page_size - 1); if (ctrl->vwc & NVME_CTRL_VWC_PRESENT) Patches currently in stable-queue which might be from keith.busch(a)intel.com are queue-4.9/nvme-check-hw-sectors-before-setting-chunk-sectors.patch

7 years, 4 months

1
0
0 0

Patch "nl80211: Check for the required netlink attribute presence" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nl80211: Check for the required netlink attribute presence to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nl80211-check-for-the-required-netlink-attribute-presence.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Hao Chen <flank3rsky(a)gmail.com> Date: Wed, 3 Jan 2018 11:00:31 +0800 Subject: nl80211: Check for the required netlink attribute presence From: Hao Chen <flank3rsky(a)gmail.com> [ Upstream commit 3ea15452ee85754f70f3b9fa1f23165ef2e77ba7 ] nl80211_nan_add_func() does not check if the required attribute NL80211_NAN_FUNC_FOLLOW_UP_DEST is present when processing NL80211_CMD_ADD_NAN_FUNCTION request. This request can be issued by users with CAP_NET_ADMIN privilege and may result in NULL dereference and a system crash. Add a check for the required attribute presence. Signed-off-by: Hao Chen <flank3rsky(a)gmail.com> Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/wireless/nl80211.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -10777,7 +10777,8 @@ static int nl80211_nan_add_func(struct s break; case NL80211_NAN_FUNC_FOLLOW_UP: if (!tb[NL80211_NAN_FUNC_FOLLOW_UP_ID] || - !tb[NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID]) { + !tb[NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID] || + !tb[NL80211_NAN_FUNC_FOLLOW_UP_DEST]) { err = -EINVAL; goto out; } Patches currently in stable-queue which might be from flank3rsky(a)gmail.com are queue-4.9/nl80211-check-for-the-required-netlink-attribute-presence.patch

7 years, 4 months

1
0
0 0

Patch "net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-usb-qmi_wwan-add-telit-me910-pid-0x1101-support.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Daniele Palmas <dnlplm(a)gmail.com> Date: Thu, 14 Dec 2017 16:56:14 +0100 Subject: net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support From: Daniele Palmas <dnlplm(a)gmail.com> [ Upstream commit c647c0d62c82eb3ddf78a0d8b3d58819d9f552aa ] This patch adds support for Telit ME910 PID 0x1101. Signed-off-by: Daniele Palmas <dnlplm(a)gmail.com> Acked-by: Bjørn Mork <bjorn(a)mork.no> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -914,6 +914,7 @@ static const struct usb_device_id produc {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */ + {QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ {QMI_FIXED_INTF(0x1bc7, 0x1201, 2)}, /* Telit LE920 */ {QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)}, /* XS Stick W100-2 from 4G Systems */ Patches currently in stable-queue which might be from dnlplm(a)gmail.com are queue-4.9/net-usb-qmi_wwan-add-telit-me910-pid-0x1101-support.patch

7 years, 4 months

1
0
0 0

Patch "NET: usb: qmi_wwan: add support for YUGA CLM920-NC5 PID 0x9625" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled NET: usb: qmi_wwan: add support for YUGA CLM920-NC5 PID 0x9625 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-usb-qmi_wwan-add-support-for-yuga-clm920-nc5-pid-0x9625.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: "SZ Lin (林上智)" <sz.lin(a)moxa.com> Date: Fri, 29 Dec 2017 17:02:17 +0800 Subject: NET: usb: qmi_wwan: add support for YUGA CLM920-NC5 PID 0x9625 From: "SZ Lin (林上智)" <sz.lin(a)moxa.com> [ Upstream commit bd30ffc414e55194ed6149fad69a145550cb7c18 ] This patch adds support for PID 0x9625 of YUGA CLM920-NC5. YUGA CLM920-NC5 needs to enable QMI_WWAN_QUIRK_DTR before QMI operation. qmicli -d /dev/cdc-wdm0 -p --dms-get-revision [/dev/cdc-wdm0] Device revision retrieved: Revision: 'CLM920_NC5-V1 1 [Oct 23 2016 19:00:00]' Signed-off-by: SZ Lin (林上智) <sz.lin(a)moxa.com> Acked-by: Bjørn Mork <bjorn(a)mork.no> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -805,6 +805,7 @@ static const struct usb_device_id produc {QMI_FIXED_INTF(0x05c6, 0x9084, 4)}, {QMI_FIXED_INTF(0x05c6, 0x920d, 0)}, {QMI_FIXED_INTF(0x05c6, 0x920d, 5)}, + {QMI_QUIRK_SET_DTR(0x05c6, 0x9625, 4)}, /* YUGA CLM920-NC5 */ {QMI_FIXED_INTF(0x0846, 0x68a2, 8)}, {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */ {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */ Patches currently in stable-queue which might be from sz.lin(a)moxa.com are queue-4.9/net-usb-qmi_wwan-add-support-for-yuga-clm920-nc5-pid-0x9625.patch

7 years, 4 months

1
0
0 0

Patch "net: stmmac: Fix TX timestamp calculation" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: stmmac: Fix TX timestamp calculation to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-stmmac-fix-tx-timestamp-calculation.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Fredrik Hallenberg <megahallon(a)gmail.com> Date: Mon, 18 Dec 2017 23:33:59 +0100 Subject: net: stmmac: Fix TX timestamp calculation From: Fredrik Hallenberg <megahallon(a)gmail.com> [ Upstream commit 200922c93f008e03ddc804c6dacdf26ca1ba86d7 ] When using GMAC4 the value written in PTP_SSIR should be shifted however the shifted value is also used in subsequent calculations which results in a bad timestamp value. Signed-off-by: Fredrik Hallenberg <megahallon(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c @@ -38,6 +38,7 @@ static u32 stmmac_config_sub_second_incr { u32 value = readl(ioaddr + PTP_TCR); unsigned long data; + u32 reg_value; /* For GMAC3.x, 4.x versions, convert the ptp_clock to nano second * formula = (1/ptp_clock) * 1000000000 @@ -54,10 +55,11 @@ static u32 stmmac_config_sub_second_incr data &= PTP_SSIR_SSINC_MASK; + reg_value = data; if (gmac4) - data = data << GMAC4_PTP_SSIR_SSINC_SHIFT; + reg_value <<= GMAC4_PTP_SSIR_SSINC_SHIFT; - writel(data, ioaddr + PTP_SSIR); + writel(reg_value, ioaddr + PTP_SSIR); return data; } Patches currently in stable-queue which might be from megahallon(a)gmail.com are queue-4.9/net-stmmac-fix-tx-timestamp-calculation.patch

7 years, 4 months

1
0
0 0

Patch "net: phy: xgene: disable clk on error paths" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: phy: xgene: disable clk on error paths to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-phy-xgene-disable-clk-on-error-paths.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Alexey Khoroshilov <khoroshilov(a)ispras.ru> Date: Sat, 16 Dec 2017 00:52:39 +0300 Subject: net: phy: xgene: disable clk on error paths From: Alexey Khoroshilov <khoroshilov(a)ispras.ru> [ Upstream commit ab14436065c8066c265540312742390d6d07ddd2 ] There are several error paths in xgene_mdio_probe(), where clk is left undisabled. The patch fixes them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov(a)ispras.ru> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/phy/mdio-xgene.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) --- a/drivers/net/phy/mdio-xgene.c +++ b/drivers/net/phy/mdio-xgene.c @@ -197,8 +197,11 @@ static int xgene_mdio_reset(struct xgene } ret = xgene_enet_ecc_init(pdata); - if (ret) + if (ret) { + if (pdata->dev->of_node) + clk_disable_unprepare(pdata->clk); return ret; + } xgene_gmac_reset(pdata); return 0; @@ -364,8 +367,10 @@ static int xgene_mdio_probe(struct platf return ret; mdio_bus = mdiobus_alloc(); - if (!mdio_bus) - return -ENOMEM; + if (!mdio_bus) { + ret = -ENOMEM; + goto out_clk; + } mdio_bus->name = "APM X-Gene MDIO bus"; @@ -394,7 +399,7 @@ static int xgene_mdio_probe(struct platf mdio_bus->phy_mask = ~0; ret = mdiobus_register(mdio_bus); if (ret) - goto out; + goto out_mdiobus; acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_HANDLE(dev), 1, acpi_register_phy, NULL, mdio_bus, NULL); @@ -402,16 +407,20 @@ static int xgene_mdio_probe(struct platf } if (ret) - goto out; + goto out_mdiobus; pdata->mdio_bus = mdio_bus; xgene_mdio_status = true; return 0; -out: +out_mdiobus: mdiobus_free(mdio_bus); +out_clk: + if (dev->of_node) + clk_disable_unprepare(pdata->clk); + return ret; } Patches currently in stable-queue which might be from khoroshilov(a)ispras.ru are queue-4.9/net-phy-xgene-disable-clk-on-error-paths.patch

7 years, 4 months

1
0
0 0

Patch "net: mediatek: setup proper state for disabled GMAC on the default" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: mediatek: setup proper state for disabled GMAC on the default to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mediatek-setup-proper-state-for-disabled-gmac-on-the-default.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Sean Wang <sean.wang(a)mediatek.com> Date: Mon, 18 Dec 2017 17:00:17 +0800 Subject: net: mediatek: setup proper state for disabled GMAC on the default From: Sean Wang <sean.wang(a)mediatek.com> [ Upstream commit 7352e252b5bf40d59342494a70354a2d436fd0cd ] The current solution would setup fixed and force link of 1Gbps to the both GMAC on the default. However, The GMAC should always be put to link down state when the GMAC is disabled on certain target boards. Otherwise, the driver possibly receives unexpected data from the floating hardware connection through the unused GMAC. Although the driver had been added certain protection in RX path to get rid of such kind of unexpected data sent to the upper stack. Signed-off-by: Sean Wang <sean.wang(a)mediatek.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1842,11 +1842,12 @@ static int mtk_hw_init(struct mtk_eth *e /* set GE2 TUNE */ regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0); - /* GE1, Force 1000M/FD, FC ON */ - mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(0)); - - /* GE2, Force 1000M/FD, FC ON */ - mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(1)); + /* Set linkdown as the default for each GMAC. Its own MCR would be set + * up with the more appropriate value when mtk_phy_link_adjust call is + * being invoked. + */ + for (i = 0; i < MTK_MAC_COUNT; i++) + mtk_w32(eth, 0, MTK_MAC_MCR(i)); /* Enable RX VLan Offloading */ mtk_w32(eth, 1, MTK_CDMP_EG_CTRL); Patches currently in stable-queue which might be from sean.wang(a)mediatek.com are queue-4.9/net-mediatek-setup-proper-state-for-disabled-gmac-on-the-default.patch

7 years, 4 months

1
0
0 0

Patch "net: gianfar_ptp: move set_fipers() to spinlock protecting area" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: gianfar_ptp: move set_fipers() to spinlock protecting area to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-gianfar_ptp-move-set_fipers-to-spinlock-protecting-area.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Yangbo Lu <yangbo.lu(a)nxp.com> Date: Tue, 9 Jan 2018 11:02:33 +0800 Subject: net: gianfar_ptp: move set_fipers() to spinlock protecting area From: Yangbo Lu <yangbo.lu(a)nxp.com> [ Upstream commit 11d827a993a969c3c6ec56758ff63a44ba19b466 ] set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by: Yangbo Lu <yangbo.lu(a)nxp.com> Acked-by: Richard Cochran <richardcochran(a)gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam(a)nxp.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/freescale/gianfar_ptp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -314,11 +314,10 @@ static int ptp_gianfar_adjtime(struct pt now = tmr_cnt_read(etsects); now += delta; tmr_cnt_write(etsects, now); + set_fipers(etsects); spin_unlock_irqrestore(&etsects->lock, flags); - set_fipers(etsects); - return 0; } Patches currently in stable-queue which might be from yangbo.lu(a)nxp.com are queue-4.9/net-gianfar_ptp-move-set_fipers-to-spinlock-protecting-area.patch

7 years, 4 months

1
0
0 0

Patch "net: arc_emac: fix arc_emac_rx() error paths" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: arc_emac: fix arc_emac_rx() error paths to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-arc_emac-fix-arc_emac_rx-error-paths.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Alexander Kochetkov <al.kochet(a)gmail.com> Date: Fri, 15 Dec 2017 20:20:06 +0300 Subject: net: arc_emac: fix arc_emac_rx() error paths From: Alexander Kochetkov <al.kochet(a)gmail.com> [ Upstream commit e688822d035b494071ecbadcccbd6f3325fb0f59 ] arc_emac_rx() has some issues found by code review. In case netdev_alloc_skb_ip_align() or dma_map_single() failure rx fifo entry will not be returned to EMAC. In case dma_map_single() failure previously allocated skb became lost to driver. At the same time address of newly allocated skb will not be provided to EMAC. Signed-off-by: Alexander Kochetkov <al.kochet(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/arc/emac_main.c | 53 ++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 22 deletions(-) --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -210,39 +210,48 @@ static int arc_emac_rx(struct net_device continue; } - pktlen = info & LEN_MASK; - stats->rx_packets++; - stats->rx_bytes += pktlen; - skb = rx_buff->skb; - skb_put(skb, pktlen); - skb->dev = ndev; - skb->protocol = eth_type_trans(skb, ndev); - - dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), - dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); - - /* Prepare the BD for next cycle */ - rx_buff->skb = netdev_alloc_skb_ip_align(ndev, - EMAC_BUFFER_SIZE); - if (unlikely(!rx_buff->skb)) { + /* Prepare the BD for next cycle. netif_receive_skb() + * only if new skb was allocated and mapped to avoid holes + * in the RX fifo. + */ + skb = netdev_alloc_skb_ip_align(ndev, EMAC_BUFFER_SIZE); + if (unlikely(!skb)) { + if (net_ratelimit()) + netdev_err(ndev, "cannot allocate skb\n"); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; - /* Because receive_skb is below, increment rx_dropped */ stats->rx_dropped++; continue; } - /* receive_skb only if new skb was allocated to avoid holes */ - netif_receive_skb(skb); - - addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data, + addr = dma_map_single(&ndev->dev, (void *)skb->data, EMAC_BUFFER_SIZE, DMA_FROM_DEVICE); if (dma_mapping_error(&ndev->dev, addr)) { if (net_ratelimit()) - netdev_err(ndev, "cannot dma map\n"); - dev_kfree_skb(rx_buff->skb); + netdev_err(ndev, "cannot map dma buffer\n"); + dev_kfree_skb(skb); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; + stats->rx_dropped++; continue; } + + /* unmap previosly mapped skb */ + dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), + dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); + + pktlen = info & LEN_MASK; + stats->rx_packets++; + stats->rx_bytes += pktlen; + skb_put(rx_buff->skb, pktlen); + rx_buff->skb->dev = ndev; + rx_buff->skb->protocol = eth_type_trans(rx_buff->skb, ndev); + + netif_receive_skb(rx_buff->skb); + + rx_buff->skb = skb; dma_unmap_addr_set(rx_buff, addr, addr); dma_unmap_len_set(rx_buff, len, EMAC_BUFFER_SIZE); Patches currently in stable-queue which might be from al.kochet(a)gmail.com are queue-4.9/net-arc_emac-fix-arc_emac_rx-error-paths.patch

7 years, 4 months

1
0
0 0

Patch "mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mtd-nand-gpmi-fix-failure-when-a-erased-page-has-a-bitflip-at-bbm.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Sascha Hauer <s.hauer(a)pengutronix.de> Date: Tue, 5 Dec 2017 11:51:40 +0100 Subject: mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM From: Sascha Hauer <s.hauer(a)pengutronix.de> [ Upstream commit fdf2e821052958a114618a95ab18a300d0b080cb ] When erased subpages are read then the BCH decoder returns STATUS_ERASED if they are all empty, or STATUS_UNCORRECTABLE if there are bitflips. When there are bitflips, we have to set these bits again to show the upper layers a completely erased page. When a bitflip happens in the exact byte where the bad block marker is, then this byte is swapped with another byte in block_mark_swapping(). The correction code then detects a bitflip in another subpage and no longer corrects the bitflip where it really happens. Correct this behaviour by calling block_mark_swapping() after the bitflips have been corrected. In our case UBIFS failed with this bug because it expects erased pages to be really empty: UBIFS error (pid 187): ubifs_scan: corrupt empty space at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: corruption at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: first 8192 bytes from LEB 36:118735 UBIFS error (pid 187): ubifs_scan: LEB 36 scanning failed UBIFS error (pid 187): do_commit: commit failed, error -117 Signed-off-by: Sascha Hauer <s.hauer(a)pengutronix.de> Reviewed-by: Richard Weinberger <richard(a)nod.at> Acked-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> Signed-off-by: Richard Weinberger <richard(a)nod.at> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1059,9 +1059,6 @@ static int gpmi_ecc_read_page(struct mtd return ret; } - /* handle the block mark swapping */ - block_mark_swapping(this, payload_virt, auxiliary_virt); - /* Loop over status bytes, accumulating ECC status. */ status = auxiliary_virt + nfc_geo->auxiliary_status_offset; @@ -1150,6 +1147,9 @@ static int gpmi_ecc_read_page(struct mtd max_bitflips = max_t(unsigned int, max_bitflips, *status); } + /* handle the block mark swapping */ + block_mark_swapping(this, buf, auxiliary_virt); + if (oob_required) { /* * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() Patches currently in stable-queue which might be from s.hauer(a)pengutronix.de are queue-4.9/mtd-nand-gpmi-fix-failure-when-a-erased-page-has-a-bitflip-at-bbm.patch

7 years, 4 months

1
0
0 0

Patch "mtd: nand: brcmnand: Zero bitflip is not an error" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mtd: nand: brcmnand: Zero bitflip is not an error to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mtd-nand-brcmnand-zero-bitflip-is-not-an-error.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Albert Hsieh <wen.hsieh(a)broadcom.com> Date: Mon, 20 Nov 2017 11:26:26 +0800 Subject: mtd: nand: brcmnand: Zero bitflip is not an error From: Albert Hsieh <wen.hsieh(a)broadcom.com> [ Upstream commit e44b9a9c135727f3410e029910275f40681dc8bc ] A negative return value of brcmstb_nand_verify_erased_page() indicates a real bitflip error of an erased page, and other return values (>= 0) show the corrected bitflip number. Zero return value means no bitflip, but the current driver code treats it as an error, and eventually leads to falsely reported ECC error. Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflip") Signed-off-by: Albert Hsieh <wen.hsieh(a)broadcom.com> Acked-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> Signed-off-by: Richard Weinberger <richard(a)nod.at> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/nand/brcmnand/brcmnand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/mtd/nand/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/brcmnand/brcmnand.c @@ -1763,7 +1763,7 @@ try_dmaread: err = brcmstb_nand_verify_erased_page(mtd, chip, buf, addr); /* erased page bitflips corrected */ - if (err > 0) + if (err >= 0) return err; } Patches currently in stable-queue which might be from wen.hsieh(a)broadcom.com are queue-4.9/mtd-nand-brcmnand-zero-bitflip-is-not-an-error.patch

7 years, 4 months

1
0
0 0

Patch "mdio-sun4i: Fix a memory leak" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mdio-sun4i: Fix a memory leak to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mdio-sun4i-fix-a-memory-leak.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Sat, 6 Jan 2018 09:00:09 +0100 Subject: mdio-sun4i: Fix a memory leak From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 56c0290202ab94a2f2780c449395d4ae8495fab4 ] If the probing of the regulator is deferred, the memory allocated by 'mdiobus_alloc_size()' will be leaking. It should be freed before the next call to 'sun4i_mdio_probe()' which will reallocate it. Fixes: 4bdcb1dd9feb ("net: Add MDIO bus driver for the Allwinner EMAC") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/phy/mdio-sun4i.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/net/phy/mdio-sun4i.c +++ b/drivers/net/phy/mdio-sun4i.c @@ -118,8 +118,10 @@ static int sun4i_mdio_probe(struct platf data->regulator = devm_regulator_get(&pdev->dev, "phy"); if (IS_ERR(data->regulator)) { - if (PTR_ERR(data->regulator) == -EPROBE_DEFER) - return -EPROBE_DEFER; + if (PTR_ERR(data->regulator) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_out_free_mdiobus; + } dev_info(&pdev->dev, "no regulator found\n"); data->regulator = NULL; Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.9/mdio-sun4i-fix-a-memory-leak.patch

7 years, 4 months

1
0
0 0

Patch "macvlan: Fix one possible double free" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled macvlan: Fix one possible double free to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: macvlan-fix-one-possible-double-free.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Gao Feng <gfree.wind(a)vip.163.com> Date: Tue, 26 Dec 2017 21:44:32 +0800 Subject: macvlan: Fix one possible double free From: Gao Feng <gfree.wind(a)vip.163.com> [ Upstream commit d02fd6e7d2933ede6478a15f9e4ce8a93845824e ] Because the macvlan_uninit would free the macvlan port, so there is one double free case in macvlan_common_newlink. When the macvlan port is just created, then register_netdevice or netdev_upper_dev_link failed and they would invoke macvlan_uninit. Then it would reach the macvlan_port_destroy which triggers the double free. Signed-off-by: Gao Feng <gfree.wind(a)vip.163.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/macvlan.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -1377,9 +1377,14 @@ int macvlan_common_newlink(struct net *s return 0; unregister_netdev: + /* macvlan_uninit would free the macvlan port */ unregister_netdevice(dev); + return err; destroy_macvlan_port: - if (create) + /* the macvlan port may be freed by macvlan_uninit when fail to register. + * so we destroy the macvlan port only when it's valid. + */ + if (create && macvlan_port_get_rtnl(dev)) macvlan_port_destroy(port->dev); return err; } Patches currently in stable-queue which might be from gfree.wind(a)vip.163.com are queue-4.9/macvlan-fix-one-possible-double-free.patch

7 years, 4 months

1
0
0 0

Patch "mac80211_hwsim: Fix a possible sleep-in-atomic bug in hwsim_get_radio_nl" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mac80211_hwsim: Fix a possible sleep-in-atomic bug in hwsim_get_radio_nl to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mac80211_hwsim-fix-a-possible-sleep-in-atomic-bug-in-hwsim_get_radio_nl.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Jia-Ju Bai <baijiaju1990(a)163.com> Date: Tue, 12 Dec 2017 17:26:36 +0800 Subject: mac80211_hwsim: Fix a possible sleep-in-atomic bug in hwsim_get_radio_nl From: Jia-Ju Bai <baijiaju1990(a)163.com> [ Upstream commit 162bd5e5fd921785077b5862d8f2ffabe2fe11e5 ] The driver may sleep under a spinlock. The function call path is: hwsim_get_radio_nl (acquire the spinlock) nlmsg_new(GFP_KERNEL) --> may sleep To fix it, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool(DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990(a)163.com> Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -3154,7 +3154,7 @@ static int hwsim_get_radio_nl(struct sk_ if (!net_eq(wiphy_net(data->hw->wiphy), genl_info_net(info))) continue; - skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC); if (!skb) { res = -ENOMEM; goto out_err; Patches currently in stable-queue which might be from baijiaju1990(a)163.com are queue-4.9/mac80211_hwsim-fix-a-possible-sleep-in-atomic-bug-in-hwsim_get_radio_nl.patch

7 years, 4 months

1
0
0 0

Patch "mac80211: mesh: drop frames appearing to be from us" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mac80211: mesh: drop frames appearing to be from us to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mac80211-mesh-drop-frames-appearing-to-be-from-us.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Johannes Berg <johannes.berg(a)intel.com> Date: Thu, 4 Jan 2018 15:51:53 +0100 Subject: mac80211: mesh: drop frames appearing to be from us From: Johannes Berg <johannes.berg(a)intel.com> [ Upstream commit 736a80bbfda709fb3631f5f62056f250a38e5804 ] If there are multiple mesh stations with the same MAC address, they will both get confused and start throwing warnings. Obviously in this case nothing can actually work anyway, so just drop frames that look like they're from ourselves early on. Reported-by: Gui Iribarren <gui(a)altermundi.net> Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/mac80211/rx.c | 2 ++ 1 file changed, 2 insertions(+) --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -3611,6 +3611,8 @@ static bool ieee80211_accept_frame(struc } return true; case NL80211_IFTYPE_MESH_POINT: + if (ether_addr_equal(sdata->vif.addr, hdr->addr2)) + return false; if (multicast) return true; return ether_addr_equal(sdata->vif.addr, hdr->addr1); Patches currently in stable-queue which might be from johannes.berg(a)intel.com are queue-4.9/mac80211_hwsim-fix-a-possible-sleep-in-atomic-bug-in-hwsim_get_radio_nl.patch queue-4.9/nl80211-check-for-the-required-netlink-attribute-presence.patch queue-4.9/mac80211-mesh-drop-frames-appearing-to-be-from-us.patch

7 years, 4 months

1
0
0 0

Patch "lib/mpi: Fix umul_ppmm() for MIPS64r6" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled lib/mpi: Fix umul_ppmm() for MIPS64r6 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: lib-mpi-fix-umul_ppmm-for-mips64r6.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: James Hogan <jhogan(a)kernel.org> Date: Tue, 5 Dec 2017 23:31:35 +0000 Subject: lib/mpi: Fix umul_ppmm() for MIPS64r6 From: James Hogan <jhogan(a)kernel.org> [ Upstream commit bbc25bee37d2b32cf3a1fab9195b6da3a185614a ] Current MIPS64r6 toolchains aren't able to generate efficient DMULU/DMUHU based code for the C implementation of umul_ppmm(), which performs an unsigned 64 x 64 bit multiply and returns the upper and lower 64-bit halves of the 128-bit result. Instead it widens the 64-bit inputs to 128-bits and emits a __multi3 intrinsic call to perform a 128 x 128 multiply. This is both inefficient, and it results in a link error since we don't include __multi3 in MIPS linux. For example commit 90a53e4432b1 ("cfg80211: implement regdb signature checking") merged in v4.15-rc1 recently broke the 64r6_defconfig and 64r6el_defconfig builds by indirectly selecting MPILIB. The same build errors can be reproduced on older kernels by enabling e.g. CRYPTO_RSA: lib/mpi/generic_mpih-mul1.o: In function `mpihelp_mul_1': lib/mpi/generic_mpih-mul1.c:50: undefined reference to `__multi3' lib/mpi/generic_mpih-mul2.o: In function `mpihelp_addmul_1': lib/mpi/generic_mpih-mul2.c:49: undefined reference to `__multi3' lib/mpi/generic_mpih-mul3.o: In function `mpihelp_submul_1': lib/mpi/generic_mpih-mul3.c:49: undefined reference to `__multi3' lib/mpi/mpih-div.o In function `mpihelp_divrem': lib/mpi/mpih-div.c:205: undefined reference to `__multi3' lib/mpi/mpih-div.c:142: undefined reference to `__multi3' Therefore add an efficient MIPS64r6 implementation of umul_ppmm() using inline assembly and the DMULU/DMUHU instructions, to prevent __multi3 calls being emitted. Fixes: 7fd08ca58ae6 ("MIPS: Add build support for the MIPS R6 ISA") Signed-off-by: James Hogan <jhogan(a)kernel.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Herbert Xu <herbert(a)gondor.apana.org.au> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: linux-mips(a)linux-mips.org Cc: linux-crypto(a)vger.kernel.org Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- lib/mpi/longlong.h | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) --- a/lib/mpi/longlong.h +++ b/lib/mpi/longlong.h @@ -671,7 +671,23 @@ do { \ ************** MIPS/64 ************** ***************************************/ #if (defined(__mips) && __mips >= 3) && W_TYPE_SIZE == 64 -#if (__GNUC__ >= 5) || (__GNUC__ >= 4 && __GNUC_MINOR__ >= 4) +#if defined(__mips_isa_rev) && __mips_isa_rev >= 6 +/* + * GCC ends up emitting a __multi3 intrinsic call for MIPS64r6 with the plain C + * code below, so we special case MIPS64r6 until the compiler can do better. + */ +#define umul_ppmm(w1, w0, u, v) \ +do { \ + __asm__ ("dmulu %0,%1,%2" \ + : "=d" ((UDItype)(w0)) \ + : "d" ((UDItype)(u)), \ + "d" ((UDItype)(v))); \ + __asm__ ("dmuhu %0,%1,%2" \ + : "=d" ((UDItype)(w1)) \ + : "d" ((UDItype)(u)), \ + "d" ((UDItype)(v))); \ +} while (0) +#elif (__GNUC__ >= 5) || (__GNUC__ >= 4 && __GNUC_MINOR__ >= 4) #define umul_ppmm(w1, w0, u, v) \ do { \ typedef unsigned int __ll_UTItype __attribute__((mode(TI))); \ Patches currently in stable-queue which might be from jhogan(a)kernel.org are queue-4.9/lib-mpi-fix-umul_ppmm-for-mips64r6.patch

7 years, 4 months

1
0
0 0

Patch "ipv6: icmp6: Allow icmp messages to be looped back" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ipv6: icmp6: Allow icmp messages to be looped back to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipv6-icmp6-allow-icmp-messages-to-be-looped-back.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Brendan McGrath <redmcg(a)redmandi.dyndns.org> Date: Wed, 13 Dec 2017 22:14:57 +1100 Subject: ipv6: icmp6: Allow icmp messages to be looped back From: Brendan McGrath <redmcg(a)redmandi.dyndns.org> [ Upstream commit 588753f1eb18978512b1c9b85fddb457d46f9033 ] One example of when an ICMPv6 packet is required to be looped back is when a host acts as both a Multicast Listener and a Multicast Router. A Multicast Router will listen on address ff02::16 for MLDv2 messages. Currently, MLDv2 messages originating from a Multicast Listener running on the same host as the Multicast Router are not being delivered to the Multicast Router. This is due to dst.input being assigned the default value of dst_discard. This results in the packet being looped back but discarded before being delivered to the Multicast Router. This patch sets dst.input to ip6_input to ensure a looped back packet is delivered to the Multicast Router. Signed-off-by: Brendan McGrath <redmcg(a)redmandi.dyndns.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/route.c | 1 + 1 file changed, 1 insertion(+) --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1651,6 +1651,7 @@ struct dst_entry *icmp6_dst_alloc(struct } rt->dst.flags |= DST_HOST; + rt->dst.input = ip6_input; rt->dst.output = ip6_output; atomic_set(&rt->dst.__refcnt, 1); rt->rt6i_gateway = fl6->daddr; Patches currently in stable-queue which might be from redmcg(a)redmandi.dyndns.org are queue-4.9/ipv6-icmp6-allow-icmp-messages-to-be-looped-back.patch

7 years, 4 months

1
0
0 0

Patch "led: core: Fix brightness setting when setting delay_off=0" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled led: core: Fix brightness setting when setting delay_off=0 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: led-core-fix-brightness-setting-when-setting-delay_off-0.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Matthieu CASTET <matthieu.castet(a)parrot.com> Date: Tue, 12 Dec 2017 11:10:44 +0100 Subject: led: core: Fix brightness setting when setting delay_off=0 From: Matthieu CASTET <matthieu.castet(a)parrot.com> [ Upstream commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c ] With the current code, the following sequence won't work : echo timer > trigger echo 0 > delay_off * at this point we call ** led_delay_off_store ** led_blink_set --- drivers/leds/led-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/leds/led-core.c +++ b/drivers/leds/led-core.c @@ -186,7 +186,7 @@ void led_blink_set(struct led_classdev * unsigned long *delay_on, unsigned long *delay_off) { - del_timer_sync(&led_cdev->blink_timer); + led_stop_software_blink(led_cdev); led_cdev->flags &= ~LED_BLINK_ONESHOT; led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP; Patches currently in stable-queue which might be from matthieu.castet(a)parrot.com are queue-4.9/led-core-fix-brightness-setting-when-setting-delay_off-0.patch

7 years, 4 months

1
0
0 0

Patch "ip6_tunnel: get the min mtu properly in ip6_tnl_xmit" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ip6_tunnel: get the min mtu properly in ip6_tnl_xmit to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ip6_tunnel-get-the-min-mtu-properly-in-ip6_tnl_xmit.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Xin Long <lucien.xin(a)gmail.com> Date: Mon, 18 Dec 2017 14:26:21 +0800 Subject: ip6_tunnel: get the min mtu properly in ip6_tnl_xmit From: Xin Long <lucien.xin(a)gmail.com> [ Upstream commit c9fefa08190fc879fb2e681035d7774e0a8c5170 ] Now it's using IPV6_MIN_MTU as the min mtu in ip6_tnl_xmit, but IPV6_MIN_MTU actually only works when the inner packet is ipv6. With IPV6_MIN_MTU for ipv4 packets, the new pmtu for inner dst couldn't be set less than 1280. It would cause tx_err and the packet to be dropped when the outer dst pmtu is close to 1280. Jianlin found it by running ipv4 traffic with the topo: (client) gre6 <---> eth1 (route) eth2 <---> gre6 (server) After changing eth2 mtu to 1300, the performance became very low, or the connection was even broken. The issue also affects ip4ip6 and ip6ip6 tunnels. So if the inner packet is ipv4, 576 should be considered as the min mtu. Note that for ip4ip6 and ip6ip6 tunnels, the inner packet can only be ipv4 or ipv6, but for gre6 tunnel, it may also be ARP. This patch using 576 as the min mtu for non-ipv6 packet works for all those cases. Reported-by: Jianlin Shi <jishi(a)redhat.com> Signed-off-by: Xin Long <lucien.xin(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/ip6_tunnel.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1127,8 +1127,13 @@ route_lookup: max_headroom += 8; mtu -= 8; } - if (mtu < IPV6_MIN_MTU) - mtu = IPV6_MIN_MTU; + if (skb->protocol == htons(ETH_P_IPV6)) { + if (mtu < IPV6_MIN_MTU) + mtu = IPV6_MIN_MTU; + } else if (mtu < 576) { + mtu = 576; + } + if (skb_dst(skb) && !t->parms.collect_md) skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu); if (skb->len - t->tun_hlen - eth_hlen > mtu && !skb_is_gso(skb)) { Patches currently in stable-queue which might be from lucien.xin(a)gmail.com are queue-4.9/ip6_tunnel-get-the-min-mtu-properly-in-ip6_tnl_xmit.patch

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror