- Linux-stable-mirror - lists.linaro.org

Patch "ip6_tunnel: get the min mtu properly in ip6_tnl_xmit" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ip6_tunnel: get the min mtu properly in ip6_tnl_xmit to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ip6_tunnel-get-the-min-mtu-properly-in-ip6_tnl_xmit.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Xin Long <lucien.xin(a)gmail.com> Date: Mon, 18 Dec 2017 14:26:21 +0800 Subject: ip6_tunnel: get the min mtu properly in ip6_tnl_xmit From: Xin Long <lucien.xin(a)gmail.com> [ Upstream commit c9fefa08190fc879fb2e681035d7774e0a8c5170 ] Now it's using IPV6_MIN_MTU as the min mtu in ip6_tnl_xmit, but IPV6_MIN_MTU actually only works when the inner packet is ipv6. With IPV6_MIN_MTU for ipv4 packets, the new pmtu for inner dst couldn't be set less than 1280. It would cause tx_err and the packet to be dropped when the outer dst pmtu is close to 1280. Jianlin found it by running ipv4 traffic with the topo: (client) gre6 <---> eth1 (route) eth2 <---> gre6 (server) After changing eth2 mtu to 1300, the performance became very low, or the connection was even broken. The issue also affects ip4ip6 and ip6ip6 tunnels. So if the inner packet is ipv4, 576 should be considered as the min mtu. Note that for ip4ip6 and ip6ip6 tunnels, the inner packet can only be ipv4 or ipv6, but for gre6 tunnel, it may also be ARP. This patch using 576 as the min mtu for non-ipv6 packet works for all those cases. Reported-by: Jianlin Shi <jishi(a)redhat.com> Signed-off-by: Xin Long <lucien.xin(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/ip6_tunnel.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1127,8 +1127,13 @@ route_lookup: max_headroom += 8; mtu -= 8; } - if (mtu < IPV6_MIN_MTU) - mtu = IPV6_MIN_MTU; + if (skb->protocol == htons(ETH_P_IPV6)) { + if (mtu < IPV6_MIN_MTU) + mtu = IPV6_MIN_MTU; + } else if (mtu < 576) { + mtu = 576; + } + if (skb_dst(skb) && !t->parms.collect_md) skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu); if (skb->len - t->tun_hlen - eth_hlen > mtu && !skb_is_gso(skb)) { Patches currently in stable-queue which might be from lucien.xin(a)gmail.com are queue-4.9/ip6_tunnel-get-the-min-mtu-properly-in-ip6_tnl_xmit.patch

7 years, 4 months

1
0
0 0

Patch "IB/mlx5: Fix mlx5_ib_alloc_mr error flow" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/mlx5: Fix mlx5_ib_alloc_mr error flow to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-mlx5-fix-mlx5_ib_alloc_mr-error-flow.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Nitzan Carmi <nitzanc(a)mellanox.com> Date: Tue, 26 Dec 2017 11:20:20 +0200 Subject: IB/mlx5: Fix mlx5_ib_alloc_mr error flow From: Nitzan Carmi <nitzanc(a)mellanox.com> [ Upstream commit 45e6ae7ef21b907dacb18da62d5787d74a31d860 ] ibmr.device is being set only after ib_alloc_mr() is (successfully) complete. Therefore, in case mlx5_core_create_mkey() return with error, the error flow calls mlx5_free_priv_descs() which uses ibmr.device (which doesn't exist yet), causing a NULL dereference oops. To fix this, the IB device should be set in the mr struct earlier stage (e.g. prior to calling mlx5_core_create_mkey()). Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API") Signed-off-by: Max Gurtovoy <maxg(a)mellanox.com> Signed-off-by: Nitzan Carmi <nitzanc(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/hw/mlx5/mr.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -1648,6 +1648,7 @@ struct ib_mr *mlx5_ib_alloc_mr(struct ib MLX5_SET(mkc, mkc, access_mode, mr->access_mode); MLX5_SET(mkc, mkc, umr_en, 1); + mr->ibmr.device = pd->device; err = mlx5_core_create_mkey(dev->mdev, &mr->mmkey, in, inlen); if (err) goto err_destroy_psv; Patches currently in stable-queue which might be from nitzanc(a)mellanox.com are queue-4.9/ib-mlx5-fix-mlx5_ib_alloc_mr-error-flow.patch queue-4.9/ib-mlx4-fix-mlx4_ib_alloc_mr-error-flow.patch

7 years, 4 months

1
0
0 0

Patch "IB/mlx4: Fix mlx4_ib_alloc_mr error flow" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/mlx4: Fix mlx4_ib_alloc_mr error flow to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-mlx4-fix-mlx4_ib_alloc_mr-error-flow.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Leon Romanovsky <leonro(a)mellanox.com> Date: Sun, 31 Dec 2017 15:33:14 +0200 Subject: IB/mlx4: Fix mlx4_ib_alloc_mr error flow From: Leon Romanovsky <leonro(a)mellanox.com> [ Upstream commit 5a371cf87e145b86efd32007e46146e78c1eff6d ] ibmr.device is being set only after ib_alloc_mr() is successfully complete. Therefore, in case imlx4_mr_enable() returns with error, the error flow unwinder calls to mlx4_free_priv_pages(), which uses ibmr.device. Such usage causes to NULL dereference oops and to fix it, the IB device should be set in the mr struct earlier stage (e.g. prior to calling mlx4_free_priv_pages()). Fixes: 1b2cd0fc673c ("IB/mlx4: Support the new memory registration API") Signed-off-by: Nitzan Carmi <nitzanc(a)mellanox.com> Signed-off-by: Leon Romanovsky <leonro(a)mellanox.com> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/hw/mlx4/mr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -406,7 +406,6 @@ struct ib_mr *mlx4_ib_alloc_mr(struct ib goto err_free_mr; mr->max_pages = max_num_sg; - err = mlx4_mr_enable(dev->dev, &mr->mmr); if (err) goto err_free_pl; @@ -417,6 +416,7 @@ struct ib_mr *mlx4_ib_alloc_mr(struct ib return &mr->ibmr; err_free_pl: + mr->ibmr.device = pd->device; mlx4_free_priv_pages(mr); err_free_mr: (void) mlx4_mr_free(dev->dev, &mr->mmr); Patches currently in stable-queue which might be from leonro(a)mellanox.com are queue-4.9/ib-mlx4-fix-mlx4_ib_alloc_mr-error-flow.patch

7 years, 4 months

1
0
0 0

Patch "IB/ipoib: Fix race condition in neigh creation" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/ipoib: Fix race condition in neigh creation to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-ipoib-fix-race-condition-in-neigh-creation.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Erez Shitrit <erezsh(a)mellanox.com> Date: Sun, 31 Dec 2017 15:33:15 +0200 Subject: IB/ipoib: Fix race condition in neigh creation From: Erez Shitrit <erezsh(a)mellanox.com> [ Upstream commit 16ba3defb8bd01a9464ba4820a487f5b196b455b ] When using enhanced mode for IPoIB, two threads may execute xmit in parallel to two different TX queues while the target is the same. In this case, both of them will add the same neighbor to the path's neigh link list and we might see the following message: list_add double add: new=ffff88024767a348, prev=ffff88024767a348... WARNING: lib/list_debug.c:31__list_add_valid+0x4e/0x70 ipoib_start_xmit+0x477/0x680 [ib_ipoib] dev_hard_start_xmit+0xb9/0x3e0 sch_direct_xmit+0xf9/0x250 __qdisc_run+0x176/0x5d0 __dev_queue_xmit+0x1f5/0xb10 __dev_queue_xmit+0x55/0xb10 Analysis: Two SKB are scheduled to be transmitted from two cores. In ipoib_start_xmit, both gets NULL when calling ipoib_neigh_get. Two calls to neigh_add_path are made. One thread takes the spin-lock and calls ipoib_neigh_alloc which creates the neigh structure, then (after the __path_find) the neigh is added to the path's neigh link list. When the second thread enters the critical section it also calls ipoib_neigh_alloc but in this case it gets the already allocated ipoib_neigh structure, which is already linked to the path's neigh link list and adds it again to the list. Which beside of triggering the list, it creates a loop in the linked list. This loop leads to endless loop inside path_rec_completion. Solution: Check list_empty(&neigh->list) before adding to the list. Add a similar fix in "ipoib_multicast.c::ipoib_mcast_send" Fixes: b63b70d87741 ('IPoIB: Use a private hash table for path lookup in xmit path') Signed-off-by: Erez Shitrit <erezsh(a)mellanox.com> Reviewed-by: Alex Vesker <valex(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 25 ++++++++++++++++++------- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 5 ++++- 2 files changed, 22 insertions(+), 8 deletions(-) --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -919,8 +919,8 @@ static int path_rec_start(struct net_dev return 0; } -static void neigh_add_path(struct sk_buff *skb, u8 *daddr, - struct net_device *dev) +static struct ipoib_neigh *neigh_add_path(struct sk_buff *skb, u8 *daddr, + struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ipoib_path *path; @@ -933,7 +933,15 @@ static void neigh_add_path(struct sk_buf spin_unlock_irqrestore(&priv->lock, flags); ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); - return; + return NULL; + } + + /* To avoid race condition, make sure that the + * neigh will be added only once. + */ + if (unlikely(!list_empty(&neigh->list))) { + spin_unlock_irqrestore(&priv->lock, flags); + return neigh; } path = __path_find(dev, daddr + 4); @@ -971,7 +979,7 @@ static void neigh_add_path(struct sk_buf spin_unlock_irqrestore(&priv->lock, flags); ipoib_send(dev, skb, path->ah, IPOIB_QPN(daddr)); ipoib_neigh_put(neigh); - return; + return NULL; } } else { neigh->ah = NULL; @@ -988,7 +996,7 @@ static void neigh_add_path(struct sk_buf spin_unlock_irqrestore(&priv->lock, flags); ipoib_neigh_put(neigh); - return; + return NULL; err_path: ipoib_neigh_free(neigh); @@ -998,6 +1006,8 @@ err_drop: spin_unlock_irqrestore(&priv->lock, flags); ipoib_neigh_put(neigh); + + return NULL; } static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, @@ -1103,8 +1113,9 @@ static int ipoib_start_xmit(struct sk_bu case htons(ETH_P_TIPC): neigh = ipoib_neigh_get(dev, phdr->hwaddr); if (unlikely(!neigh)) { - neigh_add_path(skb, phdr->hwaddr, dev); - return NETDEV_TX_OK; + neigh = neigh_add_path(skb, phdr->hwaddr, dev); + if (likely(!neigh)) + return NETDEV_TX_OK; } break; case htons(ETH_P_ARP): --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -818,7 +818,10 @@ void ipoib_mcast_send(struct net_device spin_lock_irqsave(&priv->lock, flags); if (!neigh) { neigh = ipoib_neigh_alloc(daddr, dev); - if (neigh) { + /* Make sure that the neigh will be added only + * once to mcast list. + */ + if (neigh && list_empty(&neigh->list)) { kref_get(&mcast->ah->ref); neigh->ah = mcast->ah; list_add_tail(&neigh->list, &mcast->neigh_list); Patches currently in stable-queue which might be from erezsh(a)mellanox.com are queue-4.9/ib-ipoib-fix-race-condition-in-neigh-creation.patch

7 years, 4 months

1
0
0 0

Patch "i40e/i40evf: Account for frags split over multiple descriptors in check linearize" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled i40e/i40evf: Account for frags split over multiple descriptors in check linearize to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: i40e-i40evf-account-for-frags-split-over-multiple-descriptors-in-check-linearize.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Alexander Duyck <alexander.h.duyck(a)intel.com> Date: Fri, 8 Dec 2017 10:55:04 -0800 Subject: i40e/i40evf: Account for frags split over multiple descriptors in check linearize From: Alexander Duyck <alexander.h.duyck(a)intel.com> [ Upstream commit 248de22e638f10bd5bfc7624a357f940f66ba137 ] The original code for __i40e_chk_linearize didn't take into account the fact that if a fragment is 16K in size or larger it has to be split over 2 descriptors and the smaller of those 2 descriptors will be on the trailing edge of the transmit. As a result we can get into situations where we didn't catch requests that could result in a Tx hang. This patch takes care of that by subtracting the length of all but the trailing edge of the stale fragment before we test for sum. By doing this we can guarantee that we have all cases covered, including the case of a fragment that spans multiple descriptors. We don't need to worry about checking the inner portions of this since 12K is the maximum aligned DMA size and that is larger than any MSS will ever be since the MTU limit for jumbos is something on the order of 9K. Signed-off-by: Alexander Duyck <alexander.h.duyck(a)intel.com> Tested-by: Andrew Bowers <andrewx.bowers(a)intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 26 +++++++++++++++++++++++--- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 26 +++++++++++++++++++++++--- 2 files changed, 46 insertions(+), 6 deletions(-) --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2670,10 +2670,30 @@ bool __i40e_chk_linearize(struct sk_buff /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++); + /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -2681,7 +2701,7 @@ bool __i40e_chk_linearize(struct sk_buff if (!nr_frags--) break; - sum -= skb_frag_size(stale++); + sum -= stale_size; } return false; --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -1872,10 +1872,30 @@ bool __i40evf_chk_linearize(struct sk_bu /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++); + /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -1883,7 +1903,7 @@ bool __i40evf_chk_linearize(struct sk_bu if (!nr_frags--) break; - sum -= skb_frag_size(stale++); + sum -= stale_size; } return false; Patches currently in stable-queue which might be from alexander.h.duyck(a)intel.com are queue-4.9/i40e-i40evf-account-for-frags-split-over-multiple-descriptors-in-check-linearize.patch

7 years, 4 months

1
0
0 0

[GIT PULL] commits for Linux 4.9

by Sasha Levin

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi Greg, Pleae pull commits for Linux 4.9 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit 331b057d4f3ccf2290e6e651b5728db81e9249c6: Linux 4.9.80 (2018-02-03 17:05:43 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-4.9-23022018 for you to fetch changes up to c7d6e7d081e1943667564c44312888076817af54: net: gianfar_ptp: move set_fipers() to spinlock protecting area (2018-02-03 12:53:00 -0500) - ---------------------------------------------------------------- for-greg-4.9-23022018 - ---------------------------------------------------------------- Abhijeet Kumar (1): ASoC: nau8825: fix issue that pop noise when start capture Al Viro (1): sget(): handle failures of register_shrinker() Albert Hsieh (1): mtd: nand: brcmnand: Zero bitflip is not an error Alexander Duyck (1): i40e/i40evf: Account for frags split over multiple descriptors in check linearize Alexander Kochetkov (1): net: arc_emac: fix arc_emac_rx() error paths Alexey Khoroshilov (1): net: phy: xgene: disable clk on error paths Aliaksei Karaliou (2): xfs: quota: fix missed destroy of qi_tree_lock xfs: quota: check result of register_shrinker() Andreas Platschek (1): dmaengine: fsl-edma: disable clks on all error paths Arnaldo Carvalho de Melo (1): x86/asm: Allow again using asm.h when building for the 'bpf' clang target Arnd Bergmann (1): ARM: dts: ls1021a: fix incorrect clock references Brendan McGrath (1): ipv6: icmp6: Allow icmp messages to be looped back Cathy Avery (1): scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error Christophe JAILLET (1): mdio-sun4i: Fix a memory leak Chunyan Zhang (1): ARM: 8731/1: Fix csum_partial_copy_from_user() stack mismatch Daniele Palmas (1): net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support Eduardo Otubo (1): xen-netfront: enable device after manual module load Erez Shitrit (1): IB/ipoib: Fix race condition in neigh creation Felix Janda (1): uapi libc compat: add fallback for unsupported libcs Fredrik Hallenberg (1): net: stmmac: Fix TX timestamp calculation Gao Feng (1): macvlan: Fix one possible double free Guenter Roeck (1): genirq: Guard handle_bad_irq log messages Guilherme G. Piccoli (1): bnx2x: Improve reliability in case of nested PCI errors Hao Chen (1): nl80211: Check for the required netlink attribute presence James Hogan (1): lib/mpi: Fix umul_ppmm() for MIPS64r6 Jia-Ju Bai (1): mac80211_hwsim: Fix a possible sleep-in-atomic bug in hwsim_get_radio_nl Johannes Berg (1): mac80211: mesh: drop frames appearing to be from us Karol Herbst (1): drm/nouveau/pci: do a msi rearm on init Keith Busch (1): nvme: check hw sectors before setting chunk sectors Leon Romanovsky (1): IB/mlx4: Fix mlx4_ib_alloc_mr error flow Luu An Phu (1): can: flex_can: Correct the checking for frame length in flexcan_start_xmit() Marcelo Ricardo Leitner (1): sctp: make use of pre-calculated len Matthieu CASTET (1): led: core: Fix brightness setting when setting delay_off=0 Nitzan Carmi (1): IB/mlx5: Fix mlx5_ib_alloc_mr error flow Radu Pirea (1): spi: atmel: fixed spin_lock usage inside atmel_spi_remove Ross Lagerwall (2): xen/gntdev: Fix off-by-one error when unmapping with holes xen/gntdev: Fix partial gntdev_mmap() cleanup SZ Lin (林上智) (1): NET: usb: qmi_wwan: add support for YUGA CLM920-NC5 PID 0x9625 Sascha Hauer (1): mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM Sean Wang (1): net: mediatek: setup proper state for disabled GMAC on the default Sergei Shtylyov (1): SolutionEngine771x: fix Ether platform data Siva Reddy Kallam (2): tg3: Add workaround to restrict 5762 MRRS to 2048 tg3: Enable PHY reset in MTU change path for 5720 Stefan Haberland (1): s390/dasd: fix wrongly assigned configuration data Tetsuo Handa (1): mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed. Tommi Rantala (2): tipc: error path leak fixes in tipc_enable_bearer() tipc: fix tipc_mon_delete() oops in tipc_enable_bearer() error path Tushar Dave (1): e1000: fix disabling already-disabled warning Venkat Duvvuru (1): bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine. Xin Long (1): ip6_tunnel: get the min mtu properly in ip6_tnl_xmit Xiongwei Song (1): drm/ttm: check the return value of kzalloc Yangbo Lu (1): net: gianfar_ptp: move set_fipers() to spinlock protecting area arch/arm/boot/dts/ls1021a-qds.dts | 2 +- arch/arm/boot/dts/ls1021a-twr.dts | 2 +- arch/arm/lib/csumpartialcopyuser.S | 4 ++ arch/sh/boards/mach-se/770x/setup.c | 10 +++- arch/x86/include/asm/asm.h | 2 + drivers/dma/fsl-edma.c | 28 +++++------ drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c | 7 +++ drivers/gpu/drm/ttm/ttm_page_alloc.c | 2 + drivers/infiniband/hw/mlx4/mr.c | 2 +- drivers/infiniband/hw/mlx5/mr.c | 1 + drivers/infiniband/ulp/ipoib/ipoib_main.c | 25 +++++++--- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 5 +- drivers/leds/led-core.c | 2 +- drivers/mtd/nand/brcmnand/brcmnand.c | 2 +- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 6 +-- drivers/net/can/flexcan.c | 2 +- drivers/net/ethernet/arc/emac_main.c | 53 ++++++++++++--------- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 +++++- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 2 +- drivers/net/ethernet/broadcom/tg3.c | 13 ++++- drivers/net/ethernet/broadcom/tg3.h | 4 ++ drivers/net/ethernet/freescale/gianfar_ptp.c | 3 +- drivers/net/ethernet/intel/e1000/e1000.h | 3 +- drivers/net/ethernet/intel/e1000/e1000_main.c | 27 +++++++++-- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 26 ++++++++-- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 26 ++++++++-- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 11 +++-- .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 6 ++- drivers/net/macvlan.c | 7 ++- drivers/net/phy/mdio-sun4i.c | 6 ++- drivers/net/phy/mdio-xgene.c | 21 ++++++--- drivers/net/usb/qmi_wwan.c | 2 + drivers/net/wireless/mac80211_hwsim.c | 2 +- drivers/net/xen-netfront.c | 1 + drivers/nvme/host/core.c | 3 +- drivers/s390/block/dasd_3990_erp.c | 10 ++++ drivers/scsi/storvsc_drv.c | 3 +- drivers/spi/spi-atmel.c | 2 +- drivers/xen/gntdev.c | 8 ++-- fs/super.c | 6 ++- fs/xfs/xfs_qm.c | 46 +++++++++++------- include/uapi/linux/libc-compat.h | 55 +++++++++++++++++++++- kernel/irq/debug.h | 5 ++ lib/mpi/longlong.h | 18 ++++++- mm/vmscan.c | 3 ++ net/ipv6/ip6_tunnel.c | 9 +++- net/ipv6/route.c | 1 + net/mac80211/rx.c | 2 + net/sctp/socket.c | 16 ++++--- net/tipc/bearer.c | 5 +- net/tipc/monitor.c | 6 ++- net/wireless/nl80211.c | 3 +- sound/soc/codecs/nau8825.c | 1 + 54 files changed, 407 insertions(+), 128 deletions(-) -----BEGIN PGP SIGNATURE----- iQIcBAEBCAAGBQJakgpcAAoJEN6mb/eXdyzcYeQP/2MlZj2rqiRlWcjceq3kn899 1yFsScoCH/7HqJbOP3gyfT4S+SbXjs55vCYNbKynNeXUFqG7mPk/h1VQxo06qiao oBdhegFByKYr3HkY4BJopPssmofecHi2JT7e1P1Ow+eqIxCQECl5txjkb/oa0t+1 NMbCju60uQlgPtUc/m5qCICzzERKecJPGb5v9xrZ69bEXgfv7+6v9V6F2PsC0SRR tCkuRrQuOyI7y9S8UcL0ECb98mTVVwqNs48VG1yGpt5mSyopgDprdJJvlw0jOzhk 7XtX8eTtxkEt8rs4RSH+aSQxwmFVVWpbGo3fmZLyhIeEQVBLiXcjtT1sRvrPQyXM n68Oy06s8QOXrtRTGE1w3DpfRkB0d2LUeEX7oqpuoOG/ypqunjmHn1E5StDXEH7S xx7fXMkZWplCnFADRWKkAIRkutc1ISbnOI9u+79eQPQu55KBeW3HxX0jxcgQFUb+ qIhzUQM/r94P93xvGSOVMArt8Q+a1RIG1QnH+LdMRCQsQon6QIlokdBpRsQtVHUX vosYNk4kWChL2fF9C8jat0QUZzaqtqiyCKZK2wCDMQPUx7ERyL3wFLkWK/c/LSYk V22R6dGvfRyM+ifug00dZBuP4MTlLFhuQ+Q04afiqC9J1IjM6cXFDbucYmWLrwAr ktgD88//umVLWN6qsizR =Un5c -----END PGP SIGNATURE-----

7 years, 4 months

2
1
0 0

Patch "genirq: Guard handle_bad_irq log messages" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled genirq: Guard handle_bad_irq log messages to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: genirq-guard-handle_bad_irq-log-messages.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Guenter Roeck <linux(a)roeck-us.net> Date: Sat, 2 Dec 2017 09:13:04 -0800 Subject: genirq: Guard handle_bad_irq log messages From: Guenter Roeck <linux(a)roeck-us.net> [ Upstream commit 11bca0a83f83f6093d816295668e74ef24595944 ] An interrupt storm on a bad interrupt will cause the kernel log to be clogged. [ 60.089234] ->handle_irq(): ffffffffbe2f803f, [ 60.090455] 0xffffffffbf2af380 [ 60.090510] handle_bad_irq+0x0/0x2e5 [ 60.090522] ->irq_data.chip(): ffffffffbf2af380, [ 60.090553] IRQ_NOPROBE set [ 60.090584] ->handle_irq(): ffffffffbe2f803f, [ 60.090590] handle_bad_irq+0x0/0x2e5 [ 60.090596] ->irq_data.chip(): ffffffffbf2af380, [ 60.090602] 0xffffffffbf2af380 [ 60.090608] ->action(): (null) [ 60.090779] handle_bad_irq+0x0/0x2e5 This was seen when running an upstream kernel on Acer Chromebook R11. The system was unstable as result. Guard the log message with __printk_ratelimit to reduce the impact. This won't prevent the interrupt storm from happening, but at least the system remains stable. Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Dmitry Torokhov <dtor(a)chromium.org> Cc: Joe Perches <joe(a)perches.com> Cc: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Cc: Mika Westerberg <mika.westerberg(a)linux.intel.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Link: https://lkml.kernel.org/r/1512234784-21038-1-git-send-email-linux@roeck-us.… Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/irq/debug.h | 5 +++++ 1 file changed, 5 insertions(+) --- a/kernel/irq/debug.h +++ b/kernel/irq/debug.h @@ -11,6 +11,11 @@ static inline void print_irq_desc(unsigned int irq, struct irq_desc *desc) { + static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5); + + if (!__ratelimit(&ratelimit)) + return; + printk("irq %d, desc: %p, depth: %d, count: %d, unhandled: %d\n", irq, desc, desc->depth, desc->irq_count, desc->irqs_unhandled); printk("->handle_irq(): %p, ", desc->handle_irq); Patches currently in stable-queue which might be from linux(a)roeck-us.net are queue-4.9/genirq-guard-handle_bad_irq-log-messages.patch

7 years, 4 months

1
0
0 0

Patch "e1000: fix disabling already-disabled warning" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled e1000: fix disabling already-disabled warning to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: e1000-fix-disabling-already-disabled-warning.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Tushar Dave <tushar.n.dave(a)oracle.com> Date: Wed, 6 Dec 2017 02:26:29 +0530 Subject: e1000: fix disabling already-disabled warning From: Tushar Dave <tushar.n.dave(a)oracle.com> [ Upstream commit 0b76aae741abb9d16d2c0e67f8b1e766576f897d ] This patch adds check so that driver does not disable already disabled device. [ 44.637743] advantechwdt: Unexpected close, not stopping watchdog! [ 44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 45.013419] e1000 0000:00:03.0: disabling already-disabled device [ 45.013447] ------------[ cut here ]------------ [ 45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c07399 #1 [ 45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000 [ 45.017987] RIP: 0010:pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286 [ 45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000 [ 45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203 [ 45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000 [ 45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001 [ 45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f [ 45.023842] FS: 0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 [ 45.024863] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0 [ 45.026478] Call Trace: [ 45.026811] __e1000_shutdown+0x1d4/0x1e2: __e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162 [ 45.027344] ? rcu_perf_cleanup+0x2a1/0x2a1: rcu_perf_shutdown at kernel/rcu/rcuperf.c:627 [ 45.027883] e1000_shutdown+0x14/0x3a: e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235 [ 45.028351] device_shutdown+0x110/0x1aa: device_shutdown at drivers/base/core.c:2807 [ 45.028858] kernel_power_off+0x31/0x64: kernel_power_off at kernel/reboot.c:260 [ 45.029343] rcu_perf_shutdown+0x9b/0xa7: rcu_perf_shutdown at kernel/rcu/rcuperf.c:637 [ 45.029852] ? __wake_up_common_lock+0xa2/0xa2: autoremove_wake_function at kernel/sched/wait.c:376 [ 45.030414] kthread+0x126/0x12e: kthread at kernel/kthread.c:233 [ 45.030834] ? __kthread_bind_mask+0x8e/0x8e: kthread at kernel/kthread.c:190 [ 45.031399] ? ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.031883] ? kernel_init+0xa/0xf5: kernel_init at init/main.c:997 [ 45.032325] ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82 [ 45.035222] ---[ end trace c257137b1b1976ef ]--- [ 45.037838] ACPI: Preparing to enter system sleep state S5 Signed-off-by: Tushar Dave <tushar.n.dave(a)oracle.com> Tested-by: Fengguang Wu <fengguang.wu(a)intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/intel/e1000/e1000.h | 3 +- drivers/net/ethernet/intel/e1000/e1000_main.c | 27 +++++++++++++++++++++----- 2 files changed, 24 insertions(+), 6 deletions(-) --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -331,7 +331,8 @@ struct e1000_adapter { enum e1000_state_t { __E1000_TESTING, __E1000_RESETTING, - __E1000_DOWN + __E1000_DOWN, + __E1000_DISABLED }; #undef pr_fmt --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -940,7 +940,7 @@ static int e1000_init_hw_struct(struct e static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct net_device *netdev; - struct e1000_adapter *adapter; + struct e1000_adapter *adapter = NULL; struct e1000_hw *hw; static int cards_found; @@ -950,6 +950,7 @@ static int e1000_probe(struct pci_dev *p u16 tmp = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; int bars, need_ioport; + bool disable_dev = false; /* do not allocate ioport bars when not needed */ need_ioport = e1000_is_need_ioport(pdev); @@ -1250,11 +1251,13 @@ err_mdio_ioremap: iounmap(hw->ce4100_gbe_mdio_base_virt); iounmap(hw->hw_addr); err_ioremap: + disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags); free_netdev(netdev); err_alloc_etherdev: pci_release_selected_regions(pdev, bars); err_pci_reg: - pci_disable_device(pdev); + if (!adapter || disable_dev) + pci_disable_device(pdev); return err; } @@ -1272,6 +1275,7 @@ static void e1000_remove(struct pci_dev struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + bool disable_dev; e1000_down_and_stop(adapter); e1000_release_manageability(adapter); @@ -1290,9 +1294,11 @@ static void e1000_remove(struct pci_dev iounmap(hw->flash_address); pci_release_selected_regions(pdev, adapter->bars); + disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags); free_netdev(netdev); - pci_disable_device(pdev); + if (disable_dev) + pci_disable_device(pdev); } /** @@ -5166,7 +5172,8 @@ static int __e1000_shutdown(struct pci_d if (netif_running(netdev)) e1000_free_irq(adapter); - pci_disable_device(pdev); + if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags)) + pci_disable_device(pdev); return 0; } @@ -5210,6 +5217,10 @@ static int e1000_resume(struct pci_dev * pr_err("Cannot enable PCI device from suspend\n"); return err; } + + /* flush memory to make sure state is correct */ + smp_mb__before_atomic(); + clear_bit(__E1000_DISABLED, &adapter->flags); pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); @@ -5284,7 +5295,9 @@ static pci_ers_result_t e1000_io_error_d if (netif_running(netdev)) e1000_down(adapter); - pci_disable_device(pdev); + + if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags)) + pci_disable_device(pdev); /* Request a slot slot reset. */ return PCI_ERS_RESULT_NEED_RESET; @@ -5312,6 +5325,10 @@ static pci_ers_result_t e1000_io_slot_re pr_err("Cannot re-enable PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; } + + /* flush memory to make sure state is correct */ + smp_mb__before_atomic(); + clear_bit(__E1000_DISABLED, &adapter->flags); pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); Patches currently in stable-queue which might be from tushar.n.dave(a)oracle.com are queue-4.9/e1000-fix-disabling-already-disabled-warning.patch

7 years, 4 months

1
0
0 0

Patch "drm/ttm: check the return value of kzalloc" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/ttm: check the return value of kzalloc to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-ttm-check-the-return-value-of-kzalloc.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Xiongwei Song <sxwjean(a)gmail.com> Date: Tue, 2 Jan 2018 21:24:55 +0800 Subject: drm/ttm: check the return value of kzalloc From: Xiongwei Song <sxwjean(a)gmail.com> [ Upstream commit 19d859a7205bc59ffc38303eb25ae394f61d21dc ] In the function ttm_page_alloc_init, kzalloc call is made for variable _manager, we need to check its return value, it may return NULL. Signed-off-by: Xiongwei Song <sxwjean(a)gmail.com> Reviewed-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/ttm/ttm_page_alloc.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/gpu/drm/ttm/ttm_page_alloc.c +++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c @@ -818,6 +818,8 @@ int ttm_page_alloc_init(struct ttm_mem_g pr_info("Initializing pool allocator\n"); _manager = kzalloc(sizeof(*_manager), GFP_KERNEL); + if (!_manager) + return -ENOMEM; ttm_page_pool_init_locked(&_manager->wc_pool, GFP_HIGHUSER, "wc"); Patches currently in stable-queue which might be from sxwjean(a)gmail.com are queue-4.9/drm-ttm-check-the-return-value-of-kzalloc.patch

7 years, 4 months

1
0
0 0

Patch "drm/nouveau/pci: do a msi rearm on init" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/nouveau/pci: do a msi rearm on init to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-nouveau-pci-do-a-msi-rearm-on-init.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Karol Herbst <kherbst(a)redhat.com> Date: Fri, 24 Nov 2017 03:56:26 +0100 Subject: drm/nouveau/pci: do a msi rearm on init From: Karol Herbst <kherbst(a)redhat.com> [ Upstream commit a121027d2747168df0aac0c3da35509eea39f61c ] On my GP107 when I load nouveau after unloading it, for some reason the GPU stopped sending or the CPU stopped receiving interrupts if MSI was enabled. Doing a rearm once before getting any interrupts fixes this. Signed-off-by: Karol Herbst <kherbst(a)redhat.com> Reviewed-by: Thierry Reding <treding(a)nvidia.com> Signed-off-by: Ben Skeggs <bskeggs(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c @@ -136,6 +136,13 @@ nvkm_pci_init(struct nvkm_subdev *subdev return ret; pci->irq = pdev->irq; + + /* Ensure MSI interrupts are armed, for the case where there are + * already interrupts pending (for whatever reason) at load time. + */ + if (pci->msi) + pci->func->msi_rearm(pci); + return ret; } Patches currently in stable-queue which might be from kherbst(a)redhat.com are queue-4.9/drm-nouveau-pci-do-a-msi-rearm-on-init.patch

7 years, 4 months

1
0
0 0

Patch "dmaengine: fsl-edma: disable clks on all error paths" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dmaengine: fsl-edma: disable clks on all error paths to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dmaengine-fsl-edma-disable-clks-on-all-error-paths.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Andreas Platschek <andreas.platschek(a)opentech.at> Date: Thu, 14 Dec 2017 12:50:51 +0100 Subject: dmaengine: fsl-edma: disable clks on all error paths From: Andreas Platschek <andreas.platschek(a)opentech.at> [ Upstream commit 2610acf46b9ed528ec2cacd717bc9d354e452b73 ] Previously enabled clks are only disabled if clk_prepare_enable() fails. However, there are other error paths were the previously enabled clocks are not disabled. To fix the problem, fsl_disable_clocks() now takes the number of clocks that shall be disabled + unprepared. For existing calls were all clocks were already successfully prepared + enabled, DMAMUX_NR is passed to disable + unprepare all clocks. In error paths were only some clocks were successfully prepared + enabled the loop counter is passed, in order to disable + unprepare all successfully prepared + enabled clocks. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Andreas Platschek <andreas.platschek(a)opentech.at> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma/fsl-edma.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) --- a/drivers/dma/fsl-edma.c +++ b/drivers/dma/fsl-edma.c @@ -863,11 +863,11 @@ static void fsl_edma_irq_exit( } } -static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma) +static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma, int nr_clocks) { int i; - for (i = 0; i < DMAMUX_NR; i++) + for (i = 0; i < nr_clocks; i++) clk_disable_unprepare(fsl_edma->muxclk[i]); } @@ -904,25 +904,25 @@ static int fsl_edma_probe(struct platfor res = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i); fsl_edma->muxbase[i] = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(fsl_edma->muxbase[i])) + if (IS_ERR(fsl_edma->muxbase[i])) { + /* on error: disable all previously enabled clks */ + fsl_disable_clocks(fsl_edma, i); return PTR_ERR(fsl_edma->muxbase[i]); + } sprintf(clkname, "dmamux%d", i); fsl_edma->muxclk[i] = devm_clk_get(&pdev->dev, clkname); if (IS_ERR(fsl_edma->muxclk[i])) { dev_err(&pdev->dev, "Missing DMAMUX block clock.\n"); + /* on error: disable all previously enabled clks */ + fsl_disable_clocks(fsl_edma, i); return PTR_ERR(fsl_edma->muxclk[i]); } ret = clk_prepare_enable(fsl_edma->muxclk[i]); - if (ret) { - /* disable only clks which were enabled on error */ - for (; i >= 0; i--) - clk_disable_unprepare(fsl_edma->muxclk[i]); - - dev_err(&pdev->dev, "DMAMUX clk block failed.\n"); - return ret; - } + if (ret) + /* on error: disable all previously enabled clks */ + fsl_disable_clocks(fsl_edma, i); } @@ -976,7 +976,7 @@ static int fsl_edma_probe(struct platfor if (ret) { dev_err(&pdev->dev, "Can't register Freescale eDMA engine. (%d)\n", ret); - fsl_disable_clocks(fsl_edma); + fsl_disable_clocks(fsl_edma, DMAMUX_NR); return ret; } @@ -985,7 +985,7 @@ static int fsl_edma_probe(struct platfor dev_err(&pdev->dev, "Can't register Freescale eDMA of_dma. (%d)\n", ret); dma_async_device_unregister(&fsl_edma->dma_dev); - fsl_disable_clocks(fsl_edma); + fsl_disable_clocks(fsl_edma, DMAMUX_NR); return ret; } @@ -1015,7 +1015,7 @@ static int fsl_edma_remove(struct platfo fsl_edma_cleanup_vchan(&fsl_edma->dma_dev); of_dma_controller_free(np); dma_async_device_unregister(&fsl_edma->dma_dev); - fsl_disable_clocks(fsl_edma); + fsl_disable_clocks(fsl_edma, DMAMUX_NR); return 0; } Patches currently in stable-queue which might be from andreas.platschek(a)opentech.at are queue-4.9/dmaengine-fsl-edma-disable-clks-on-all-error-paths.patch

7 years, 4 months

1
0
0 0

Patch "can: flex_can: Correct the checking for frame length in flexcan_start_xmit()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled can: flex_can: Correct the checking for frame length in flexcan_start_xmit() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: can-flex_can-correct-the-checking-for-frame-length-in-flexcan_start_xmit.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Luu An Phu <phu.luuan(a)nxp.com> Date: Tue, 2 Jan 2018 10:44:18 +0700 Subject: can: flex_can: Correct the checking for frame length in flexcan_start_xmit() From: Luu An Phu <phu.luuan(a)nxp.com> [ Upstream commit 13454c14550065fcc1705d6bd4ee6d40e057099f ] The flexcan_start_xmit() function compares the frame length with data register length to write frame content into data[0] and data[1] register. Data register length is 4 bytes and frame maximum length is 8 bytes. Fix the check that compares frame length with 3. Because the register length is 4. Signed-off-by: Luu An Phu <phu.luuan(a)nxp.com> Reviewed-by: Oliver Hartkopp <socketcan(a)hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/can/flexcan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -493,7 +493,7 @@ static int flexcan_start_xmit(struct sk_ data = be32_to_cpup((__be32 *)&cf->data[0]); flexcan_write(data, &regs->mb[FLEXCAN_TX_BUF_ID].data[0]); } - if (cf->can_dlc > 3) { + if (cf->can_dlc > 4) { data = be32_to_cpup((__be32 *)&cf->data[4]); flexcan_write(data, &regs->mb[FLEXCAN_TX_BUF_ID].data[1]); } Patches currently in stable-queue which might be from phu.luuan(a)nxp.com are queue-4.9/can-flex_can-correct-the-checking-for-frame-length-in-flexcan_start_xmit.patch

7 years, 4 months

1
0
0 0

Patch "bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnxt_en-fix-the-invalid-vf-id-check-in-bnxt_vf_ndo_prep-routine.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Venkat Duvvuru <venkatkumar.duvvuru(a)broadcom.com> Date: Thu, 4 Jan 2018 18:46:55 -0500 Subject: bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine. From: Venkat Duvvuru <venkatkumar.duvvuru(a)broadcom.com> [ Upstream commit 78f300049335ae81a5cc6b4b232481dc5e1f9d41 ] In bnxt_vf_ndo_prep (which is called by bnxt_get_vf_config ndo), there is a check for "Invalid VF id". Currently, the check is done against max_vfs. However, the user doesn't always create max_vfs. So, the check should be against the created number of VFs. The number of bnxt_vf_info structures that are allocated in bnxt_alloc_vf_resources routine is the "number of requested VFs". So, if an "invalid VF id" falls between the requested number of VFs and the max_vfs, the driver will be dereferencing an invalid pointer. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Venkat Devvuru <venkatkumar.duvvuru(a)broadcom.com> Signed-off-by: Michael Chan <michael.chan(a)broadcom.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c @@ -68,7 +68,7 @@ static int bnxt_vf_ndo_prep(struct bnxt netdev_err(bp->dev, "vf ndo called though sriov is disabled\n"); return -EINVAL; } - if (vf_id >= bp->pf.max_vfs) { + if (vf_id >= bp->pf.active_vfs) { netdev_err(bp->dev, "Invalid VF id %d\n", vf_id); return -EINVAL; } Patches currently in stable-queue which might be from venkatkumar.duvvuru(a)broadcom.com are queue-4.9/bnxt_en-fix-the-invalid-vf-id-check-in-bnxt_vf_ndo_prep-routine.patch

7 years, 4 months

1
0
0 0

Patch "bnx2x: Improve reliability in case of nested PCI errors" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnx2x: Improve reliability in case of nested PCI errors to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnx2x-improve-reliability-in-case-of-nested-pci-errors.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: "Guilherme G. Piccoli" <gpiccoli(a)linux.vnet.ibm.com> Date: Fri, 22 Dec 2017 13:01:39 -0200 Subject: bnx2x: Improve reliability in case of nested PCI errors From: "Guilherme G. Piccoli" <gpiccoli(a)linux.vnet.ibm.com> [ Upstream commit f7084059a9cb9e56a186e1677b1dcffd76c2cd24 ] While in recovery process of PCI error (called EEH on PowerPC arch), another PCI transaction could be corrupted causing a situation of nested PCI errors. Also, this scenario could be reproduced with error injection mechanisms (for debug purposes). We observe that in case of nested PCI errors, bnx2x might attempt to initialize its shmem and cause a kernel crash due to bad addresses read from MCP. Multiple different stack traces were observed depending on the point the second PCI error happens. This patch avoids the crashes by: * failing PCI recovery in case of nested errors (since multiple PCI errors in a row are not expected to lead to a functional adapter anyway), and by, * preventing access to adapter FW when MCP is failed (we mark it as failed when shmem cannot get initialized properly). Reported-by: Abdul Haleem <abdhalee(a)linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli(a)linux.vnet.ibm.com> Acked-by: Shahed Shaikh <Shahed.Shaikh(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 ++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 +++++++++++++- 2 files changed, 15 insertions(+), 3 deletions(-) --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3034,7 +3034,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, i del_timer_sync(&bp->timer); - if (IS_PF(bp)) { + if (IS_PF(bp) && !BP_NOMCP(bp)) { /* Set ALWAYS_ALIVE bit in shmem */ bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE; bnx2x_drv_pulse(bp); @@ -3120,7 +3120,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, i bp->cnic_loaded = false; /* Clear driver version indication in shmem */ - if (IS_PF(bp)) + if (IS_PF(bp) && !BP_NOMCP(bp)) bnx2x_update_mng_version(bp); /* Check if there are pending parity attentions. If there are - set --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9578,6 +9578,15 @@ static int bnx2x_init_shmem(struct bnx2x do { bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + + /* If we read all 0xFFs, means we are in PCI error state and + * should bail out to avoid crashes on adapter's FW reads. + */ + if (bp->common.shmem_base == 0xFFFFFFFF) { + bp->flags |= NO_MCP_FLAG; + return -ENODEV; + } + if (bp->common.shmem_base) { val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]); if (val & SHR_MEM_VALIDITY_MB) @@ -14312,7 +14321,10 @@ static pci_ers_result_t bnx2x_io_slot_re BNX2X_ERR("IO slot reset --> driver unload\n"); /* MCP should have been reset; Need to wait for validity */ - bnx2x_init_shmem(bp); + if (bnx2x_init_shmem(bp)) { + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { u32 v; Patches currently in stable-queue which might be from gpiccoli(a)linux.vnet.ibm.com are queue-4.9/bnx2x-improve-reliability-in-case-of-nested-pci-errors.patch

7 years, 4 months

1
0
0 0

Patch "ARM: dts: ls1021a: fix incorrect clock references" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: ls1021a: fix incorrect clock references to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-ls1021a-fix-incorrect-clock-references.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Arnd Bergmann <arnd(a)arndb.de> Date: Thu, 21 Dec 2017 22:35:19 +0100 Subject: ARM: dts: ls1021a: fix incorrect clock references From: Arnd Bergmann <arnd(a)arndb.de> [ Upstream commit 506e8a912661c97b41adc8a286b875d01323ec45 ] dtc warns about two 'clocks' properties that have an extraneous '1' at the end: arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a:clocks[1]) Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2190000/sgtl5000@a arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2190000/sgtl5000@a:clocks[1]) The clocks that get referenced here are fixed-rate, so they do not take any argument, and dtc interprets the next cell as a phandle, which is invalid. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/ls1021a-qds.dts | 2 +- arch/arm/boot/dts/ls1021a-twr.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -215,7 +215,7 @@ reg = <0x2a>; VDDA-supply = <&reg_3p3v>; VDDIO-supply = <&reg_3p3v>; - clocks = <&sys_mclk 1>; + clocks = <&sys_mclk>; }; }; }; --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -187,7 +187,7 @@ reg = <0x0a>; VDDA-supply = <&reg_3p3v>; VDDIO-supply = <&reg_3p3v>; - clocks = <&sys_mclk 1>; + clocks = <&sys_mclk>; }; }; Patches currently in stable-queue which might be from arnd(a)arndb.de are queue-4.9/x86-asm-allow-again-using-asm.h-when-building-for-the-bpf-clang-target.patch queue-4.9/arm-dts-ls1021a-fix-incorrect-clock-references.patch

7 years, 4 months

1
0
0 0

Patch "ASoC: nau8825: fix issue that pop noise when start capture" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: nau8825: fix issue that pop noise when start capture to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-nau8825-fix-issue-that-pop-noise-when-start-capture.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Abhijeet Kumar <abhijeet.kumar(a)intel.com> Date: Tue, 12 Dec 2017 00:40:25 +0530 Subject: ASoC: nau8825: fix issue that pop noise when start capture From: Abhijeet Kumar <abhijeet.kumar(a)intel.com> [ Upstream commit d070f7c703ef26e3db613f24206823f916272fc6 ] In skylake platform, we hear a loud pop noise(0 dB) at start of audio capture power up sequence. This patch removes the pop noise from the recording by adding a delay before enabling ADC. Signed-off-by: Abhijeet Kumar <abhijeet.kumar(a)intel.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/codecs/nau8825.c | 1 + 1 file changed, 1 insertion(+) --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -882,6 +882,7 @@ static int nau8825_adc_event(struct snd_ switch (event) { case SND_SOC_DAPM_POST_PMU: + msleep(125); regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC); break; Patches currently in stable-queue which might be from abhijeet.kumar(a)intel.com are queue-4.9/asoc-nau8825-fix-issue-that-pop-noise-when-start-capture.patch

7 years, 4 months

1
0
0 0

Patch "ARM: 8731/1: Fix csum_partial_copy_from_user() stack mismatch" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: 8731/1: Fix csum_partial_copy_from_user() stack mismatch to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-8731-1-fix-csum_partial_copy_from_user-stack-mismatch.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:13:29 CET 2018 From: Chunyan Zhang <zhang.lyra(a)gmail.com> Date: Fri, 1 Dec 2017 03:51:04 +0100 Subject: ARM: 8731/1: Fix csum_partial_copy_from_user() stack mismatch From: Chunyan Zhang <zhang.lyra(a)gmail.com> [ Upstream commit 36b0cb84ee858f02c256d26f0cb4229c78e3399e ] An additional 'ip' will be pushed to the stack, for restoring the DACR later, if CONFIG_CPU_SW_DOMAIN_PAN defined. However, the fixup still get the err_ptr by add #8*4 to sp, which results in the fact that the code area pointed by the LR will be overwritten, or the kernel will crash if CONFIG_DEBUG_RODATA is enabled. This patch fixes the stack mismatch. Fixes: a5e090acbf54 ("ARM: software-based priviledged-no-access support") Signed-off-by: Lvqiang Huang <Lvqiang.Huang(a)spreadtrum.com> Signed-off-by: Chunyan Zhang <zhang.lyra(a)gmail.com> Signed-off-by: Russell King <rmk+kernel(a)armlinux.org.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/lib/csumpartialcopyuser.S | 4 ++++ 1 file changed, 4 insertions(+) --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -85,7 +85,11 @@ .pushsection .text.fixup,"ax" .align 4 9001: mov r4, #-EFAULT +#ifdef CONFIG_CPU_SW_DOMAIN_PAN + ldr r5, [sp, #9*4] @ *err_ptr +#else ldr r5, [sp, #8*4] @ *err_ptr +#endif str r4, [r5] ldmia sp, {r1, r2} @ retrieve dst, len add r2, r2, r1 Patches currently in stable-queue which might be from zhang.lyra(a)gmail.com are queue-4.9/arm-8731-1-fix-csum_partial_copy_from_user-stack-mismatch.patch

7 years, 4 months

1
0
0 0

v4.14.23 build: 0 failures 1 warnings (v4.14.23)

by Build bot for Mark Brown

Tree/Branch: v4.14.23 Git describe: v4.14.23 Commit: 267ef1d332 Linux 4.14.23 Build Time: 109 min 25 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 1 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 1 warnings 0 mismatches : arm64-allmodconfig ------------------------------------------------------------------------------- Warnings Summary: 1 1 ../include/linux/sched/mm.h:188:56: warning: 'noio_flag' may be used uninitialized in this function [-Wmaybe-uninitialized] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/sched/mm.h:188:56: warning: 'noio_flag' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

7 years, 4 months

1
0
0 0

[PATCH] rtl8187: Fix NULL pointer dereference in priv->conf_mutex

by Sudhir Sreedharan

This can be reproduced by bind/unbind the driver multiple times in AM3517 board. Analysis revealed that rtl8187_start() was invoked before probe finishes(ie. before the mutex is initialized). INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) [<c010e0d8>] (unwind_backtrace) from [<c010beac>] (show_stack+0x10/0x14) [<c010beac>] (show_stack) from [<c017401c>] (register_lock_class+0x4f4/0x55c) [<c017401c>] (register_lock_class) from [<c0176fe0>] (__lock_acquire+0x74/0x1938) [<c0176fe0>] (__lock_acquire) from [<c0178cfc>] (lock_acquire+0xfc/0x23c) [<c0178cfc>] (lock_acquire) from [<c08aa2f8>] (mutex_lock_nested+0x50/0x3b0) [<c08aa2f8>] (mutex_lock_nested) from [<c05f5bf8>] (rtl8187_start+0x2c/0xd54) [<c05f5bf8>] (rtl8187_start) from [<c082dea0>] (drv_start+0xa8/0x320) [<c082dea0>] (drv_start) from [<c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4) [<c084d1d4>] (ieee80211_do_open) from [<c069be94>] (__dev_open+0xb8/0x120) [<c069be94>] (__dev_open) from [<c069c11c>] (__dev_change_flags+0x88/0x14c) [<c069c11c>] (__dev_change_flags) from [<c069c1f8>] (dev_change_flags+0x18/0x48) [<c069c1f8>] (dev_change_flags) from [<c0710b08>] (devinet_ioctl+0x738/0x840) [<c0710b08>] (devinet_ioctl) from [<c067925c>] (sock_ioctl+0x164/0x2f4) [<c067925c>] (sock_ioctl) from [<c02883f8>] (do_vfs_ioctl+0x8c/0x9d0) [<c02883f8>] (do_vfs_ioctl) from [<c0288da8>] (SyS_ioctl+0x6c/0x7c) [<c0288da8>] (SyS_ioctl) from [<c0107760>] (ret_fast_syscall+0x0/0x1c) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = cd1ec000 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) task: ce73eec0 task.stack: cd1ea000 PC is at mutex_lock_nested+0xe8/0x3b0 LR is at mutex_lock_nested+0xd0/0x3b0 Cc: stable(a)vger.kernel.org Signed-off-by: Sudhir Sreedharan <ssreedharan(a)mvista.com> --- drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c index 121b94f..9a1d15b 100644 --- a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c @@ -1450,6 +1450,7 @@ static int rtl8187_probe(struct usb_interface *intf, goto err_free_dev; } mutex_init(&priv->io_mutex); + mutex_init(&priv->conf_mutex); SET_IEEE80211_DEV(dev, &intf->dev); usb_set_intfdata(intf, dev); @@ -1625,7 +1626,6 @@ static int rtl8187_probe(struct usb_interface *intf, printk(KERN_ERR "rtl8187: Cannot register device\n"); goto err_free_dmabuf; } - mutex_init(&priv->conf_mutex); skb_queue_head_init(&priv->b_tx_status.queue); wiphy_info(dev->wiphy, "hwaddr %pM, %s V%d + %s, rfkill mask %d\n", -- 2.6.4

7 years, 4 months

2
1
0 0

Patch "platform/x86: dell-laptop: Allocate buffer on heap rather than globally" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled platform/x86: dell-laptop: Allocate buffer on heap rather than globally to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: platform-x86-dell-laptop-allocate-buffer-on-heap-rather-than-globally.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 9862b43624a5450a097cc4122732857b869dbbca Mon Sep 17 00:00:00 2001 From: Mario Limonciello <mario.limonciello(a)dell.com> Date: Wed, 31 Jan 2018 11:47:35 -0600 Subject: platform/x86: dell-laptop: Allocate buffer on heap rather than globally From: Mario Limonciello <mario.limonciello(a)dell.com> commit 9862b43624a5450a097cc4122732857b869dbbca upstream. There is no longer a need for the buffer to be defined in first 4GB physical address space. Furthermore there may be race conditions with multiple different functions working on a module wide buffer causing incorrect results. Fixes: 549b4930f057658dc50d8010e66219233119a4d8 Suggested-by: Pali Rohar <pali.rohar(a)gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello(a)dell.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/platform/x86/dell-laptop.c | 188 ++++++++++++++++++++----------------- 1 file changed, 103 insertions(+), 85 deletions(-) --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -78,7 +78,6 @@ static struct platform_driver platform_d } }; -static struct calling_interface_buffer *buffer; static struct platform_device *platform_device; static struct backlight_device *dell_backlight_device; static struct rfkill *wifi_rfkill; @@ -286,7 +285,8 @@ static const struct dmi_system_id dell_q { } }; -void dell_set_arguments(u32 arg0, u32 arg1, u32 arg2, u32 arg3) +static void dell_fill_request(struct calling_interface_buffer *buffer, + u32 arg0, u32 arg1, u32 arg2, u32 arg3) { memset(buffer, 0, sizeof(struct calling_interface_buffer)); buffer->input[0] = arg0; @@ -295,7 +295,8 @@ void dell_set_arguments(u32 arg0, u32 ar buffer->input[3] = arg3; } -int dell_send_request(u16 class, u16 select) +static int dell_send_request(struct calling_interface_buffer *buffer, + u16 class, u16 select) { int ret; @@ -432,21 +433,22 @@ static int dell_rfkill_set(void *data, b int disable = blocked ? 1 : 0; unsigned long radio = (unsigned long)data; int hwswitch_bit = (unsigned long)data - 1; + struct calling_interface_buffer buffer; int hwswitch; int status; int ret; - dell_set_arguments(0, 0, 0, 0); - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL); + dell_fill_request(&buffer, 0, 0, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL); if (ret) return ret; - status = buffer->output[1]; + status = buffer.output[1]; - dell_set_arguments(0x2, 0, 0, 0); - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL); + dell_fill_request(&buffer, 0x2, 0, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL); if (ret) return ret; - hwswitch = buffer->output[1]; + hwswitch = buffer.output[1]; /* If the hardware switch controls this radio, and the hardware switch is disabled, always disable the radio */ @@ -454,8 +456,8 @@ static int dell_rfkill_set(void *data, b (status & BIT(0)) && !(status & BIT(16))) disable = 1; - dell_set_arguments(1 | (radio<<8) | (disable << 16), 0, 0, 0); - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL); + dell_fill_request(&buffer, 1 | (radio<<8) | (disable << 16), 0, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL); return ret; } @@ -464,9 +466,11 @@ static void dell_rfkill_update_sw_state( { if (status & BIT(0)) { /* Has hw-switch, sync sw_state to BIOS */ + struct calling_interface_buffer buffer; int block = rfkill_blocked(rfkill); - dell_set_arguments(1 | (radio << 8) | (block << 16), 0, 0, 0); - dell_send_request(CLASS_INFO, SELECT_RFKILL); + dell_fill_request(&buffer, + 1 | (radio << 8) | (block << 16), 0, 0, 0); + dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL); } else { /* No hw-switch, sync BIOS state to sw_state */ rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16))); @@ -483,21 +487,22 @@ static void dell_rfkill_update_hw_state( static void dell_rfkill_query(struct rfkill *rfkill, void *data) { int radio = ((unsigned long)data & 0xF); + struct calling_interface_buffer buffer; int hwswitch; int status; int ret; - dell_set_arguments(0, 0, 0, 0); - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL); - status = buffer->output[1]; + dell_fill_request(&buffer, 0, 0, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL); + status = buffer.output[1]; if (ret != 0 || !(status & BIT(0))) { return; } - dell_set_arguments(0, 0x2, 0, 0); - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL); - hwswitch = buffer->output[1]; + dell_fill_request(&buffer, 0, 0x2, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL); + hwswitch = buffer.output[1]; if (ret != 0) return; @@ -514,22 +519,23 @@ static struct dentry *dell_laptop_dir; static int dell_debugfs_show(struct seq_file *s, void *data) { + struct calling_interface_buffer buffer; int hwswitch_state; int hwswitch_ret; int status; int ret; - dell_set_arguments(0, 0, 0, 0); - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL); + dell_fill_request(&buffer, 0, 0, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL); if (ret) return ret; - status = buffer->output[1]; + status = buffer.output[1]; - dell_set_arguments(0, 0x2, 0, 0); - hwswitch_ret = dell_send_request(CLASS_INFO, SELECT_RFKILL); + dell_fill_request(&buffer, 0, 0x2, 0, 0); + hwswitch_ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL); if (hwswitch_ret) return hwswitch_ret; - hwswitch_state = buffer->output[1]; + hwswitch_state = buffer.output[1]; seq_printf(s, "return:\t%d\n", ret); seq_printf(s, "status:\t0x%X\n", status); @@ -610,22 +616,23 @@ static const struct file_operations dell static void dell_update_rfkill(struct work_struct *ignored) { + struct calling_interface_buffer buffer; int hwswitch = 0; int status; int ret; - dell_set_arguments(0, 0, 0, 0); - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL); - status = buffer->output[1]; + dell_fill_request(&buffer, 0, 0, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL); + status = buffer.output[1]; if (ret != 0) return; - dell_set_arguments(0, 0x2, 0, 0); - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL); + dell_fill_request(&buffer, 0, 0x2, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL); if (ret == 0 && (status & BIT(0))) - hwswitch = buffer->output[1]; + hwswitch = buffer.output[1]; if (wifi_rfkill) { dell_rfkill_update_hw_state(wifi_rfkill, 1, status, hwswitch); @@ -683,6 +690,7 @@ static struct notifier_block dell_laptop static int __init dell_setup_rfkill(void) { + struct calling_interface_buffer buffer; int status, ret, whitelisted; const char *product; @@ -698,9 +706,9 @@ static int __init dell_setup_rfkill(void if (!force_rfkill && !whitelisted) return 0; - dell_set_arguments(0, 0, 0, 0); - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL); - status = buffer->output[1]; + dell_fill_request(&buffer, 0, 0, 0, 0); + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL); + status = buffer.output[1]; /* dell wireless info smbios call is not supported */ if (ret != 0) @@ -853,6 +861,7 @@ static void dell_cleanup_rfkill(void) static int dell_send_intensity(struct backlight_device *bd) { + struct calling_interface_buffer buffer; struct calling_interface_token *token; int ret; @@ -860,17 +869,21 @@ static int dell_send_intensity(struct ba if (!token) return -ENODEV; - dell_set_arguments(token->location, bd->props.brightness, 0, 0); + dell_fill_request(&buffer, + token->location, bd->props.brightness, 0, 0); if (power_supply_is_system_supplied() > 0) - ret = dell_send_request(CLASS_TOKEN_WRITE, SELECT_TOKEN_AC); + ret = dell_send_request(&buffer, + CLASS_TOKEN_WRITE, SELECT_TOKEN_AC); else - ret = dell_send_request(CLASS_TOKEN_WRITE, SELECT_TOKEN_BAT); + ret = dell_send_request(&buffer, + CLASS_TOKEN_WRITE, SELECT_TOKEN_BAT); return ret; } static int dell_get_intensity(struct backlight_device *bd) { + struct calling_interface_buffer buffer; struct calling_interface_token *token; int ret; @@ -878,14 +891,17 @@ static int dell_get_intensity(struct bac if (!token) return -ENODEV; - dell_set_arguments(token->location, 0, 0, 0); + dell_fill_request(&buffer, token->location, 0, 0, 0); if (power_supply_is_system_supplied() > 0) - ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_AC); + ret = dell_send_request(&buffer, + CLASS_TOKEN_READ, SELECT_TOKEN_AC); else - ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_BAT); + ret = dell_send_request(&buffer, + CLASS_TOKEN_READ, SELECT_TOKEN_BAT); if (ret == 0) - ret = buffer->output[1]; + ret = buffer.output[1]; + return ret; } @@ -1149,31 +1165,33 @@ static DEFINE_MUTEX(kbd_led_mutex); static int kbd_get_info(struct kbd_info *info) { + struct calling_interface_buffer buffer; u8 units; int ret; - dell_set_arguments(0, 0, 0, 0); - ret = dell_send_request(CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT); + dell_fill_request(&buffer, 0, 0, 0, 0); + ret = dell_send_request(&buffer, + CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT); if (ret) return ret; - info->modes = buffer->output[1] & 0xFFFF; - info->type = (buffer->output[1] >> 24) & 0xFF; - info->triggers = buffer->output[2] & 0xFF; - units = (buffer->output[2] >> 8) & 0xFF; - info->levels = (buffer->output[2] >> 16) & 0xFF; + info->modes = buffer.output[1] & 0xFFFF; + info->type = (buffer.output[1] >> 24) & 0xFF; + info->triggers = buffer.output[2] & 0xFF; + units = (buffer.output[2] >> 8) & 0xFF; + info->levels = (buffer.output[2] >> 16) & 0xFF; if (quirks && quirks->kbd_led_levels_off_1 && info->levels) info->levels--; if (units & BIT(0)) - info->seconds = (buffer->output[3] >> 0) & 0xFF; + info->seconds = (buffer.output[3] >> 0) & 0xFF; if (units & BIT(1)) - info->minutes = (buffer->output[3] >> 8) & 0xFF; + info->minutes = (buffer.output[3] >> 8) & 0xFF; if (units & BIT(2)) - info->hours = (buffer->output[3] >> 16) & 0xFF; + info->hours = (buffer.output[3] >> 16) & 0xFF; if (units & BIT(3)) - info->days = (buffer->output[3] >> 24) & 0xFF; + info->days = (buffer.output[3] >> 24) & 0xFF; return ret; } @@ -1233,31 +1251,34 @@ static int kbd_set_level(struct kbd_stat static int kbd_get_state(struct kbd_state *state) { + struct calling_interface_buffer buffer; int ret; - dell_set_arguments(0x1, 0, 0, 0); - ret = dell_send_request(CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT); + dell_fill_request(&buffer, 0, 0, 0, 0); + ret = dell_send_request(&buffer, + CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT); if (ret) return ret; - state->mode_bit = ffs(buffer->output[1] & 0xFFFF); + state->mode_bit = ffs(buffer.output[1] & 0xFFFF); if (state->mode_bit != 0) state->mode_bit--; - state->triggers = (buffer->output[1] >> 16) & 0xFF; - state->timeout_value = (buffer->output[1] >> 24) & 0x3F; - state->timeout_unit = (buffer->output[1] >> 30) & 0x3; - state->als_setting = buffer->output[2] & 0xFF; - state->als_value = (buffer->output[2] >> 8) & 0xFF; - state->level = (buffer->output[2] >> 16) & 0xFF; - state->timeout_value_ac = (buffer->output[2] >> 24) & 0x3F; - state->timeout_unit_ac = (buffer->output[2] >> 30) & 0x3; + state->triggers = (buffer.output[1] >> 16) & 0xFF; + state->timeout_value = (buffer.output[1] >> 24) & 0x3F; + state->timeout_unit = (buffer.output[1] >> 30) & 0x3; + state->als_setting = buffer.output[2] & 0xFF; + state->als_value = (buffer.output[2] >> 8) & 0xFF; + state->level = (buffer.output[2] >> 16) & 0xFF; + state->timeout_value_ac = (buffer.output[2] >> 24) & 0x3F; + state->timeout_unit_ac = (buffer.output[2] >> 30) & 0x3; return ret; } static int kbd_set_state(struct kbd_state *state) { + struct calling_interface_buffer buffer; int ret; u32 input1; u32 input2; @@ -1270,8 +1291,9 @@ static int kbd_set_state(struct kbd_stat input2 |= (state->level & 0xFF) << 16; input2 |= (state->timeout_value_ac & 0x3F) << 24; input2 |= (state->timeout_unit_ac & 0x3) << 30; - dell_set_arguments(0x2, input1, input2, 0); - ret = dell_send_request(CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT); + dell_fill_request(&buffer, 0x2, input1, input2, 0); + ret = dell_send_request(&buffer, + CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT); return ret; } @@ -1298,6 +1320,7 @@ static int kbd_set_state_safe(struct kbd static int kbd_set_token_bit(u8 bit) { + struct calling_interface_buffer buffer; struct calling_interface_token *token; int ret; @@ -1308,14 +1331,15 @@ static int kbd_set_token_bit(u8 bit) if (!token) return -EINVAL; - dell_set_arguments(token->location, token->value, 0, 0); - ret = dell_send_request(CLASS_TOKEN_WRITE, SELECT_TOKEN_STD); + dell_fill_request(&buffer, token->location, token->value, 0, 0); + ret = dell_send_request(&buffer, CLASS_TOKEN_WRITE, SELECT_TOKEN_STD); return ret; } static int kbd_get_token_bit(u8 bit) { + struct calling_interface_buffer buffer; struct calling_interface_token *token; int ret; int val; @@ -1327,9 +1351,9 @@ static int kbd_get_token_bit(u8 bit) if (!token) return -EINVAL; - dell_set_arguments(token->location, 0, 0, 0); - ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_STD); - val = buffer->output[1]; + dell_fill_request(&buffer, token->location, 0, 0, 0); + ret = dell_send_request(&buffer, CLASS_TOKEN_READ, SELECT_TOKEN_STD); + val = buffer.output[1]; if (ret) return ret; @@ -2046,6 +2070,7 @@ static struct notifier_block dell_laptop int dell_micmute_led_set(int state) { + struct calling_interface_buffer buffer; struct calling_interface_token *token; if (state == 0) @@ -2058,8 +2083,8 @@ int dell_micmute_led_set(int state) if (!token) return -ENODEV; - dell_set_arguments(token->location, token->value, 0, 0); - dell_send_request(CLASS_TOKEN_WRITE, SELECT_TOKEN_STD); + dell_fill_request(&buffer, token->location, token->value, 0, 0); + dell_send_request(&buffer, CLASS_TOKEN_WRITE, SELECT_TOKEN_STD); return state; } @@ -2090,13 +2115,6 @@ static int __init dell_init(void) if (ret) goto fail_platform_device2; - buffer = kzalloc(sizeof(struct calling_interface_buffer), GFP_KERNEL); - if (!buffer) { - ret = -ENOMEM; - goto fail_buffer; - } - - ret = dell_setup_rfkill(); if (ret) { @@ -2121,10 +2139,13 @@ static int __init dell_init(void) token = dell_smbios_find_token(BRIGHTNESS_TOKEN); if (token) { - dell_set_arguments(token->location, 0, 0, 0); - ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_AC); + struct calling_interface_buffer buffer; + + dell_fill_request(&buffer, token->location, 0, 0, 0); + ret = dell_send_request(&buffer, + CLASS_TOKEN_READ, SELECT_TOKEN_AC); if (ret) - max_intensity = buffer->output[3]; + max_intensity = buffer.output[3]; } if (max_intensity) { @@ -2158,8 +2179,6 @@ static int __init dell_init(void) fail_get_brightness: backlight_device_unregister(dell_backlight_device); fail_backlight: - kfree(buffer); -fail_buffer: dell_cleanup_rfkill(); fail_rfkill: platform_device_del(platform_device); @@ -2179,7 +2198,6 @@ static void __exit dell_exit(void) touchpad_led_exit(); kbd_led_exit(); backlight_device_unregister(dell_backlight_device); - kfree(buffer); dell_cleanup_rfkill(); if (platform_device) { platform_device_unregister(platform_device); Patches currently in stable-queue which might be from mario.limonciello(a)dell.com are queue-4.15/platform-x86-dell-laptop-allocate-buffer-on-heap-rather-than-globally.patch

7 years, 4 months

1
0
0 0

Patch "f2fs: fix a bug caused by NULL extent tree" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled f2fs: fix a bug caused by NULL extent tree to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: f2fs-fix-a-bug-caused-by-null-extent-tree.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From dad48e73127ba10279ea33e6dbc8d3905c4d31c0 Mon Sep 17 00:00:00 2001 From: Yunlei He <heyunlei(a)huawei.com> Date: Fri, 19 May 2017 15:06:12 +0800 Subject: f2fs: fix a bug caused by NULL extent tree From: Yunlei He <heyunlei(a)huawei.com> commit dad48e73127ba10279ea33e6dbc8d3905c4d31c0 upstream. Thread A: Thread B: -f2fs_remount -sbi->mount_opt.opt = 0; <--- -f2fs_iget -do_read_inode -f2fs_init_extent_tree -F2FS_I(inode)->extent_tree is NULL -default_options && parse_options -remount return <--- -f2fs_map_blocks -f2fs_lookup_extent_tree -f2fs_bug_on(sbi, !et); The same problem with f2fs_new_inode. Signed-off-by: Yunlei He <heyunlei(a)huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk(a)kernel.org> Signed-off-by: Nikolay Borisov <nborisov(a)suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/f2fs/extent_cache.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) --- a/fs/f2fs/extent_cache.c +++ b/fs/f2fs/extent_cache.c @@ -177,7 +177,7 @@ static void __drop_largest_extent(struct } /* return true, if inode page is changed */ -bool f2fs_init_extent_tree(struct inode *inode, struct f2fs_extent *i_ext) +static bool __f2fs_init_extent_tree(struct inode *inode, struct f2fs_extent *i_ext) { struct f2fs_sb_info *sbi = F2FS_I_SB(inode); struct extent_tree *et; @@ -215,6 +215,16 @@ out: return false; } +bool f2fs_init_extent_tree(struct inode *inode, struct f2fs_extent *i_ext) +{ + bool ret = __f2fs_init_extent_tree(inode, i_ext); + + if (!F2FS_I(inode)->extent_tree) + set_inode_flag(inode, FI_NO_EXTENT); + + return ret; +} + static bool f2fs_lookup_extent_tree(struct inode *inode, pgoff_t pgofs, struct extent_info *ei) { Patches currently in stable-queue which might be from heyunlei(a)huawei.com are queue-4.9/f2fs-fix-a-bug-caused-by-null-extent-tree.patch

7 years, 4 months

1
0
0 0

Patch "f2fs: fix a bug caused by NULL extent tree" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled f2fs: fix a bug caused by NULL extent tree to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: f2fs-fix-a-bug-caused-by-null-extent-tree.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From dad48e73127ba10279ea33e6dbc8d3905c4d31c0 Mon Sep 17 00:00:00 2001 From: Yunlei He <heyunlei(a)huawei.com> Date: Fri, 19 May 2017 15:06:12 +0800 Subject: f2fs: fix a bug caused by NULL extent tree From: Yunlei He <heyunlei(a)huawei.com> commit dad48e73127ba10279ea33e6dbc8d3905c4d31c0 upstream. Thread A: Thread B: -f2fs_remount -sbi->mount_opt.opt = 0; <--- -f2fs_iget -do_read_inode -f2fs_init_extent_tree -F2FS_I(inode)->extent_tree is NULL -default_options && parse_options -remount return <--- -f2fs_map_blocks -f2fs_lookup_extent_tree -f2fs_bug_on(sbi, !et); The same problem with f2fs_new_inode. Signed-off-by: Yunlei He <heyunlei(a)huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk(a)kernel.org> Signed-off-by: Nikolay Borisov <nborisov(a)suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/f2fs/extent_cache.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) --- a/fs/f2fs/extent_cache.c +++ b/fs/f2fs/extent_cache.c @@ -172,7 +172,7 @@ void f2fs_drop_largest_extent(struct ino __drop_largest_extent(inode, fofs, 1); } -void f2fs_init_extent_tree(struct inode *inode, struct f2fs_extent *i_ext) +static void __f2fs_init_extent_tree(struct inode *inode, struct f2fs_extent *i_ext) { struct f2fs_sb_info *sbi = F2FS_I_SB(inode); struct extent_tree *et; @@ -204,6 +204,14 @@ out: write_unlock(&et->lock); } +void f2fs_init_extent_tree(struct inode *inode, struct f2fs_extent *i_ext) +{ + __f2fs_init_extent_tree(inode, i_ext); + + if (!F2FS_I(inode)->extent_tree) + set_inode_flag(F2FS_I(inode), FI_NO_EXTENT); +} + static bool f2fs_lookup_extent_tree(struct inode *inode, pgoff_t pgofs, struct extent_info *ei) { Patches currently in stable-queue which might be from heyunlei(a)huawei.com are queue-4.4/f2fs-fix-a-bug-caused-by-null-extent-tree.patch

7 years, 4 months

1
0
0 0

[PATCH 4.4] f2fs: fix a bug caused by NULL extent tree

by Nikolay Borisov

From: Yunlei He <heyunlei(a)huawei.com> Thread A: Thread B: -f2fs_remount -sbi->mount_opt.opt = 0; <--- -f2fs_iget -do_read_inode -f2fs_init_extent_tree -F2FS_I(inode)->extent_tree is NULL -default_options && parse_options -remount return <--- -f2fs_map_blocks -f2fs_lookup_extent_tree -f2fs_bug_on(sbi, !et); The same problem with f2fs_new_inode. Signed-off-by: Yunlei He <heyunlei(a)huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk(a)kernel.org> Signed-off-by: Nikolay Borisov <nborisov(a)suse.com> --- Hello Greg, I would like to have upstream commit dad48e73127b ("f2fs: fix a bug caused by NULL extent tree") included in the 4.4 stable kernel. This is the backport of it. fs/f2fs/extent_cache.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/f2fs/extent_cache.c b/fs/f2fs/extent_cache.c index 7ddba812e11b..6827b9c942dc 100644 --- a/fs/f2fs/extent_cache.c +++ b/fs/f2fs/extent_cache.c @@ -172,7 +172,7 @@ void f2fs_drop_largest_extent(struct inode *inode, pgoff_t fofs) __drop_largest_extent(inode, fofs, 1); } -void f2fs_init_extent_tree(struct inode *inode, struct f2fs_extent *i_ext) +static void __f2fs_init_extent_tree(struct inode *inode, struct f2fs_extent *i_ext) { struct f2fs_sb_info *sbi = F2FS_I_SB(inode); struct extent_tree *et; @@ -204,6 +204,14 @@ void f2fs_init_extent_tree(struct inode *inode, struct f2fs_extent *i_ext) write_unlock(&et->lock); } +void f2fs_init_extent_tree(struct inode *inode, struct f2fs_extent *i_ext) +{ + __f2fs_init_extent_tree(inode, i_ext); + + if (!F2FS_I(inode)->extent_tree) + set_inode_flag(F2FS_I(inode), FI_NO_EXTENT); +} + static bool f2fs_lookup_extent_tree(struct inode *inode, pgoff_t pgofs, struct extent_info *ei) { -- 2.7.4

7 years, 4 months

2
3
0 0

Patch "i2c: designware: must wait for enable" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled i2c: designware: must wait for enable to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: i2c-designware-must-wait-for-enable.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From fba4adbbf670577e605f9ad306629db6031cd48b Mon Sep 17 00:00:00 2001 From: Ben Gardner <gardner.ben(a)gmail.com> Date: Wed, 14 Feb 2018 09:29:52 -0600 Subject: i2c: designware: must wait for enable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Ben Gardner <gardner.ben(a)gmail.com> commit fba4adbbf670577e605f9ad306629db6031cd48b upstream. One I2C bus on my Atom E3845 board has been broken since 4.9. It has two devices, both declared by ACPI and with built-in drivers. There are two back-to-back transactions originating from the kernel, one targeting each device. The first transaction works, the second one locks up the I2C controller. The controller never recovers. These kernel logs show up whenever an I2C transaction is attempted after this failure. i2c-designware-pci 0000:00:18.3: timeout in disabling adapter i2c-designware-pci 0000:00:18.3: timeout waiting for bus ready Waiting for the I2C controller status to indicate that it is enabled before programming it fixes the issue. I have tested this patch on 4.14 and 4.15. Fixes: commit 2702ea7dbec5 ("i2c: designware: wait for disable/enable only if necessary") Cc: linux-stable <stable(a)vger.kernel.org> #4.13+ Signed-off-by: Ben Gardner <gardner.ben(a)gmail.com> Acked-by: Jarkko Nikula <jarkko.nikula(a)linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza(a)intel.com> Signed-off-by: Wolfram Sang <wsa(a)the-dreams.de> Signed-off-by: Ben Gardner <gardner.ben(a)gmail.com> [Jarkko: Backported to v4.9..v4.12 before i2c-designware-core.c was renamed to i2c-designware-master.c] Signed-off-by: Jarkko Nikula <jarkko.nikula(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/i2c/busses/i2c-designware-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -507,7 +507,7 @@ static void i2c_dw_xfer_init(struct dw_i i2c_dw_disable_int(dev); /* Enable the adapter */ - __i2c_dw_enable(dev, true); + __i2c_dw_enable_and_wait(dev, true); /* Clear and enable interrupts */ dw_readl(dev, DW_IC_CLR_INTR); Patches currently in stable-queue which might be from gardner.ben(a)gmail.com are queue-4.9/i2c-designware-must-wait-for-enable.patch

7 years, 4 months

1
0
0 0

Backport request

by Corey Minyard

Requesting backport of: 174134ac760275457bb0d1560a0dbe6cf8a12ad6 ipmi_si: Fix error handling of platform device to 4.15 only. Without it, an oops can occur in certain situations. Thanks, -corey

7 years, 4 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror