- Linux-stable-mirror - lists.linaro.org

Patch "scsi: qla2xxx: Fix extraneous ref on sp's after adapter break" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: qla2xxx: Fix extraneous ref on sp's after adapter break to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-qla2xxx-fix-extraneous-ref-on-sp-s-after-adapter-break.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4cd3b6ebff8510b2139d64024411207090cfe0a9 Mon Sep 17 00:00:00 2001 From: Bill Kuzeja <William.Kuzeja(a)stratus.com> Date: Thu, 25 May 2017 15:26:31 -0400 Subject: scsi: qla2xxx: Fix extraneous ref on sp's after adapter break From: Bill Kuzeja <William.Kuzeja(a)stratus.com> commit 4cd3b6ebff8510b2139d64024411207090cfe0a9 upstream. Hung task timeouts can result if a qlogic board breaks unexpectedly while running I/O. These tasks become hung because command srb reference counts are not going to zero, hence the affected srbs and commands do not get freed. This fix accounts for this extra reference in the srbs in the case of a board failure. Fixes: a465537ad1a4 ("qla2xxx: Disable the adapter and skip error recovery in case of register disconnect") Signed-off-by: Bill Kuzeja <william.kuzeja(a)stratus.com> Acked-by: Himanshu Madhani <himanshu.madhani(a)cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/qla2xxx/qla_os.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1443,7 +1443,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha) void qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) { - int que, cnt; + int que, cnt, status; unsigned long flags; srb_t *sp; struct qla_hw_data *ha = vha->hw; @@ -1473,8 +1473,12 @@ qla2x00_abort_all_cmds(scsi_qla_host_t * */ sp_get(sp); spin_unlock_irqrestore(&ha->hardware_lock, flags); - qla2xxx_eh_abort(GET_CMD_SP(sp)); + status = qla2xxx_eh_abort(GET_CMD_SP(sp)); spin_lock_irqsave(&ha->hardware_lock, flags); + /* Get rid of extra reference if immediate exit + * from ql2xxx_eh_abort */ + if (status == FAILED && (qla2x00_isp_reg_stat(ha))) + atomic_dec(&sp->ref_count); } req->outstanding_cmds[cnt] = NULL; sp->done(vha, sp, res); Patches currently in stable-queue which might be from William.Kuzeja(a)stratus.com are queue-4.9/scsi-qla2xxx-fix-extraneous-ref-on-sp-s-after-adapter-break.patch

7 years, 6 months

1
0
0 0

Patch "usb: gadget: bdc: 64-bit pointer capability check" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: gadget: bdc: 64-bit pointer capability check to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-gadget-bdc-64-bit-pointer-capability-check.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c8e4e5bdb62a5ac6f860ebcaaf7b467b62f453f1 Mon Sep 17 00:00:00 2001 From: Srinath Mannam <srinath.mannam(a)broadcom.com> Date: Thu, 15 Jun 2017 14:39:22 +0530 Subject: usb: gadget: bdc: 64-bit pointer capability check From: Srinath Mannam <srinath.mannam(a)broadcom.com> commit c8e4e5bdb62a5ac6f860ebcaaf7b467b62f453f1 upstream. Corrected the register to check the 64-bit pointer capability state. 64-bit pointer implementation capability was checking in wrong register, which causes the BDC enumeration failure in 64-bit memory address. Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Srinath Mannam <srinath.mannam(a)broadcom.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/gadget/udc/bdc/bdc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/usb/gadget/udc/bdc/bdc_core.c +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c @@ -475,7 +475,7 @@ static int bdc_probe(struct platform_dev bdc->dev = dev; dev_dbg(bdc->dev, "bdc->regs: %p irq=%d\n", bdc->regs, bdc->irq); - temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp = bdc_readl(bdc->regs, BDC_BDCCAP1); if ((temp & BDC_P64) && !dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) { dev_dbg(bdc->dev, "Using 64-bit address\n"); Patches currently in stable-queue which might be from srinath.mannam(a)broadcom.com are queue-4.9/usb-gadget-bdc-64-bit-pointer-capability-check.patch

7 years, 6 months

1
0
0 0

Patch "USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-gadget-udc-add-missing-platform_device_put-on-error-in-bdc_pci_probe.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun <weiyongjun1(a)huawei.com> Date: Tue, 23 Jan 2018 09:35:14 +0000 Subject: USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe() From: Wei Yongjun <weiyongjun1(a)huawei.com> commit 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 upstream. Add the missing platform_device_put() before return from bdc_pci_probe() in the platform_device_add_resources() error handling case. Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/gadget/udc/bdc/bdc_pci.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/usb/gadget/udc/bdc/bdc_pci.c +++ b/drivers/usb/gadget/udc/bdc/bdc_pci.c @@ -82,6 +82,7 @@ static int bdc_pci_probe(struct pci_dev if (ret) { dev_err(&pci->dev, "couldn't add resources to bdc device\n"); + platform_device_put(bdc); return ret; } Patches currently in stable-queue which might be from weiyongjun1(a)huawei.com are queue-4.4/usb-gadget-udc-add-missing-platform_device_put-on-error-in-bdc_pci_probe.patch

7 years, 6 months

1
0
0 0

Patch "usb: gadget: bdc: 64-bit pointer capability check" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: gadget: bdc: 64-bit pointer capability check to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-gadget-bdc-64-bit-pointer-capability-check.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c8e4e5bdb62a5ac6f860ebcaaf7b467b62f453f1 Mon Sep 17 00:00:00 2001 From: Srinath Mannam <srinath.mannam(a)broadcom.com> Date: Thu, 15 Jun 2017 14:39:22 +0530 Subject: usb: gadget: bdc: 64-bit pointer capability check From: Srinath Mannam <srinath.mannam(a)broadcom.com> commit c8e4e5bdb62a5ac6f860ebcaaf7b467b62f453f1 upstream. Corrected the register to check the 64-bit pointer capability state. 64-bit pointer implementation capability was checking in wrong register, which causes the BDC enumeration failure in 64-bit memory address. Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Srinath Mannam <srinath.mannam(a)broadcom.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/gadget/udc/bdc/bdc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/usb/gadget/udc/bdc/bdc_core.c +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c @@ -475,7 +475,7 @@ static int bdc_probe(struct platform_dev bdc->dev = dev; dev_dbg(bdc->dev, "bdc->regs: %p irq=%d\n", bdc->regs, bdc->irq); - temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp = bdc_readl(bdc->regs, BDC_BDCCAP1); if ((temp & BDC_P64) && !dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) { dev_dbg(bdc->dev, "Using 64-bit address\n"); Patches currently in stable-queue which might be from srinath.mannam(a)broadcom.com are queue-4.4/usb-gadget-bdc-64-bit-pointer-capability-check.patch

7 years, 6 months

1
0
0 0

Patch "usb: gadget: udc: renesas_usb3: fix oops in renesas_usb3_remove()" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: gadget: udc: renesas_usb3: fix oops in renesas_usb3_remove() to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-gadget-udc-renesas_usb3-fix-oops-in-renesas_usb3_remove.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e3190868e5f52fb26544f16463593d54ce46ce61 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Date: Fri, 12 Jan 2018 20:00:56 +0900 Subject: usb: gadget: udc: renesas_usb3: fix oops in renesas_usb3_remove() From: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> commit e3190868e5f52fb26544f16463593d54ce46ce61 upstream. This patch fixes an issue that the renesas_usb3_remove() causes NULL pointer dereference because the usb3_to_dev() macro will use the gadget instance and it will be deleted before. Fixes: cf06df3fae28 ("usb: gadget: udc: renesas_usb3: move pm_runtime_{en,dis}able()") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/gadget/udc/renesas_usb3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -2410,7 +2410,7 @@ static int renesas_usb3_remove(struct pl __renesas_usb3_ep_free_request(usb3->ep0_req); if (usb3->phy) phy_put(usb3->phy); - pm_runtime_disable(usb3_to_dev(usb3)); + pm_runtime_disable(&pdev->dev); return 0; } Patches currently in stable-queue which might be from yoshihiro.shimoda.uh(a)renesas.com are queue-4.15/usb-gadget-udc-renesas_usb3-fix-oops-in-renesas_usb3_remove.patch

7 years, 6 months

1
0
0 0

Patch "USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe() to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-gadget-udc-add-missing-platform_device_put-on-error-in-bdc_pci_probe.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun <weiyongjun1(a)huawei.com> Date: Tue, 23 Jan 2018 09:35:14 +0000 Subject: USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe() From: Wei Yongjun <weiyongjun1(a)huawei.com> commit 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 upstream. Add the missing platform_device_put() before return from bdc_pci_probe() in the platform_device_add_resources() error handling case. Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/gadget/udc/bdc/bdc_pci.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/usb/gadget/udc/bdc/bdc_pci.c +++ b/drivers/usb/gadget/udc/bdc/bdc_pci.c @@ -77,6 +77,7 @@ static int bdc_pci_probe(struct pci_dev if (ret) { dev_err(&pci->dev, "couldn't add resources to bdc device\n"); + platform_device_put(bdc); return ret; } Patches currently in stable-queue which might be from weiyongjun1(a)huawei.com are queue-4.15/usb-gadget-udc-add-missing-platform_device_put-on-error-in-bdc_pci_probe.patch

7 years, 6 months

1
0
0 0

Patch "usb: dwc3: of-simple: fix oops by unbalanced clk disable call" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc3: of-simple: fix oops by unbalanced clk disable call to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-dwc3-of-simple-fix-oops-by-unbalanced-clk-disable-call.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From bff52352e0ccc2481f2b6b0d612ff8ff56c50f3a Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra <enric.balletbo(a)collabora.com> Date: Mon, 18 Dec 2017 16:14:36 +0100 Subject: usb: dwc3: of-simple: fix oops by unbalanced clk disable call From: Enric Balletbo i Serra <enric.balletbo(a)collabora.com> commit bff52352e0ccc2481f2b6b0d612ff8ff56c50f3a upstream. dwc3_of_simple_dev_pm_ops has never been used since commit a0d8c4cfdf31 ("usb: dwc3: of-simple: set dev_pm_ops"), but this commit has brought and oops when unbind the device due this sequence: dwc3_of_simple_remove -> clk_disable ... -> pm_runtime_put_sync -> dwc3_of_simple_runtime_suspend -> clk_disable (again) This double call to clk_core_disable causes a kernel oops like this: WARNING: CPU: 1 PID: 4022 at drivers/clk/clk.c:656 clk_core_disable+0x78/0x80 CPU: 1 PID: 4022 Comm: bash Not tainted 4.15.0-rc4+ #44 Hardware name: Google Kevin (DT) pstate: 80000085 (Nzcv daIf -PAN -UAO) pc : clk_core_disable+0x78/0x80 lr : clk_core_disable_lock+0x20/0x38 sp : ffff00000bbf3a90 ... Call trace: clk_core_disable+0x78/0x80 clk_disable+0x1c/0x30 dwc3_of_simple_runtime_suspend+0x30/0x50 pm_generic_runtime_suspend+0x28/0x40 This patch fixes the unbalanced clk disable call by setting the num_clocks variable to zero once the clocks were disabled. Fixes: a0d8c4cfdf31 ("usb: dwc3: of-simple: set dev_pm_ops") Signed-off-by: Enric Balletbo i Serra <enric.balletbo(a)collabora.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc3/dwc3-of-simple.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -143,6 +143,7 @@ static int dwc3_of_simple_remove(struct clk_disable_unprepare(simple->clks[i]); clk_put(simple->clks[i]); } + simple->num_clocks = 0; reset_control_assert(simple->resets); reset_control_put(simple->resets); Patches currently in stable-queue which might be from enric.balletbo(a)collabora.com are queue-4.15/usb-dwc3-of-simple-fix-oops-by-unbalanced-clk-disable-call.patch

7 years, 6 months

1
0
0 0

Patch "usb: dwc3: Fix GDBGFIFOSPACE_TYPE values" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc3: Fix GDBGFIFOSPACE_TYPE values to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-dwc3-fix-gdbgfifospace_type-values.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b16ea8b9492e99e03b1269fe93ebdbf8e4eabf8a Mon Sep 17 00:00:00 2001 From: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com> Date: Fri, 2 Feb 2018 13:21:35 -0800 Subject: usb: dwc3: Fix GDBGFIFOSPACE_TYPE values From: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com> commit b16ea8b9492e99e03b1269fe93ebdbf8e4eabf8a upstream. The FIFO/Queue type values are incorrect. Correct them according to DWC_usb3 programming guide section 1.2.27 (or DWC_usb31 section 1.2.25). Additionally, this patch includes ProtocolStatusQ and AuxEventQ types. Fixes: cf6d867d3b57 ("usb: dwc3: core: add fifo space helper") Signed-off-by: Thinh Nguyen <thinhn(a)synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc3/core.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -158,13 +158,15 @@ #define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0) #define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff) -#define DWC3_TXFIFOQ 1 -#define DWC3_RXFIFOQ 3 -#define DWC3_TXREQQ 5 -#define DWC3_RXREQQ 7 -#define DWC3_RXINFOQ 9 -#define DWC3_DESCFETCHQ 13 -#define DWC3_EVENTQ 15 +#define DWC3_TXFIFOQ 0 +#define DWC3_RXFIFOQ 1 +#define DWC3_TXREQQ 2 +#define DWC3_RXREQQ 3 +#define DWC3_RXINFOQ 4 +#define DWC3_PSTATQ 5 +#define DWC3_DESCFETCHQ 6 +#define DWC3_EVENTQ 7 +#define DWC3_AUXEVENTQ 8 /* Global RX Threshold Configuration Register */ #define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19) Patches currently in stable-queue which might be from Thinh.Nguyen(a)synopsys.com are queue-4.15/usb-dwc3-fix-gdbgfifospace_type-values.patch

7 years, 6 months

1
0
0 0

Patch "usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-dwc3-core-power-off-core-phys-on-system_suspend-in-host-mode.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c4a5153e87fdf6805f63ff57556260e2554155a5 Mon Sep 17 00:00:00 2001 From: Manu Gautam <mgautam(a)codeaurora.org> Date: Thu, 18 Jan 2018 16:54:30 +0530 Subject: usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode From: Manu Gautam <mgautam(a)codeaurora.org> commit c4a5153e87fdf6805f63ff57556260e2554155a5 upstream. Commit 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during host bus-suspend/resume") updated suspend/resume routines to not power_off and reinit PHYs/core for host mode. It broke platforms that rely on DWC3 core to power_off PHYs to enter low power state on system suspend. Perform dwc3_core_exit/init only during host mode system_suspend/ resume to addresses power regression from above mentioned patch and also allow USB session to stay connected across runtime_suspend/resume in host mode. While at it also replace existing checks for HOST only dr_mode with current_dr_role to have similar core driver behavior for both Host-only and DRD+Host configurations. Fixes: 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during host bus-suspend/resume") Reviewed-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Manu Gautam <mgautam(a)codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc3/core.c | 36 ++++++++++++++++++++++-------------- 1 file changed, 22 insertions(+), 14 deletions(-) --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -100,6 +100,8 @@ static void dwc3_set_prtcap(struct dwc3 reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); reg |= DWC3_GCTL_PRTCAPDIR(mode); dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + dwc->current_dr_role = mode; } static void __dwc3_set_mode(struct work_struct *work) @@ -133,8 +135,6 @@ static void __dwc3_set_mode(struct work_ dwc3_set_prtcap(dwc, dwc->desired_dr_role); - dwc->current_dr_role = dwc->desired_dr_role; - spin_unlock_irqrestore(&dwc->lock, flags); switch (dwc->desired_dr_role) { @@ -218,7 +218,7 @@ static int dwc3_core_soft_reset(struct d * XHCI driver will reset the host block. If dwc3 was configured for * host-only mode, then we can return early. */ - if (dwc->dr_mode == USB_DR_MODE_HOST) + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; reg = dwc3_readl(dwc->regs, DWC3_DCTL); @@ -915,7 +915,6 @@ static int dwc3_core_init_mode(struct dw switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: - dwc->current_dr_role = DWC3_GCTL_PRTCAP_DEVICE; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); if (dwc->usb2_phy) @@ -931,7 +930,6 @@ static int dwc3_core_init_mode(struct dw } break; case USB_DR_MODE_HOST: - dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); if (dwc->usb2_phy) @@ -1279,7 +1277,7 @@ static int dwc3_remove(struct platform_d } #ifdef CONFIG_PM -static int dwc3_suspend_common(struct dwc3 *dwc) +static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; @@ -1291,6 +1289,10 @@ static int dwc3_suspend_common(struct dw dwc3_core_exit(dwc); break; case DWC3_GCTL_PRTCAP_HOST: + /* do nothing during host runtime_suspend */ + if (!PMSG_IS_AUTO(msg)) + dwc3_core_exit(dwc); + break; default: /* do nothing */ break; @@ -1299,7 +1301,7 @@ static int dwc3_suspend_common(struct dw return 0; } -static int dwc3_resume_common(struct dwc3 *dwc) +static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; int ret; @@ -1315,6 +1317,13 @@ static int dwc3_resume_common(struct dwc spin_unlock_irqrestore(&dwc->lock, flags); break; case DWC3_GCTL_PRTCAP_HOST: + /* nothing to do on host runtime_resume */ + if (!PMSG_IS_AUTO(msg)) { + ret = dwc3_core_init(dwc); + if (ret) + return ret; + } + break; default: /* do nothing */ break; @@ -1326,12 +1335,11 @@ static int dwc3_resume_common(struct dwc static int dwc3_runtime_checks(struct dwc3 *dwc) { switch (dwc->current_dr_role) { - case USB_DR_MODE_PERIPHERAL: - case USB_DR_MODE_OTG: + case DWC3_GCTL_PRTCAP_DEVICE: if (dwc->connected) return -EBUSY; break; - case USB_DR_MODE_HOST: + case DWC3_GCTL_PRTCAP_HOST: default: /* do nothing */ break; @@ -1348,7 +1356,7 @@ static int dwc3_runtime_suspend(struct d if (dwc3_runtime_checks(dwc)) return -EBUSY; - ret = dwc3_suspend_common(dwc); + ret = dwc3_suspend_common(dwc, PMSG_AUTO_SUSPEND); if (ret) return ret; @@ -1364,7 +1372,7 @@ static int dwc3_runtime_resume(struct de device_init_wakeup(dev, false); - ret = dwc3_resume_common(dwc); + ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME); if (ret) return ret; @@ -1411,7 +1419,7 @@ static int dwc3_suspend(struct device *d struct dwc3 *dwc = dev_get_drvdata(dev); int ret; - ret = dwc3_suspend_common(dwc); + ret = dwc3_suspend_common(dwc, PMSG_SUSPEND); if (ret) return ret; @@ -1427,7 +1435,7 @@ static int dwc3_resume(struct device *de pinctrl_pm_select_default_state(dev); - ret = dwc3_resume_common(dwc); + ret = dwc3_resume_common(dwc, PMSG_RESUME); if (ret) return ret; Patches currently in stable-queue which might be from mgautam(a)codeaurora.org are queue-4.15/usb-dwc3-core-power-off-core-phys-on-system_suspend-in-host-mode.patch

7 years, 6 months

1
0
0 0

Patch "scsi: qla2xxx: Fix smatch warning in qla25xx_delete_{rsp|req}_que" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: qla2xxx: Fix smatch warning in qla25xx_delete_{rsp|req}_que to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-qla2xxx-fix-smatch-warning-in-qla25xx_delete_-rsp-req-_que.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 62aa281470fdb7c0796d63a1cc918a8c1f02dde2 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani <himanshu.madhani(a)cavium.com> Date: Sat, 16 Dec 2017 16:05:09 -0800 Subject: scsi: qla2xxx: Fix smatch warning in qla25xx_delete_{rsp|req}_que From: Himanshu Madhani <himanshu.madhani(a)cavium.com> commit 62aa281470fdb7c0796d63a1cc918a8c1f02dde2 upstream. This patch fixes following warnings reported by smatch: drivers/scsi/qla2xxx/qla_mid.c:586 qla25xx_delete_req_que() error: we previously assumed 'req' could be null (see line 580) drivers/scsi/qla2xxx/qla_mid.c:602 qla25xx_delete_rsp_que() error: we previously assumed 'rsp' could be null (see line 596) Fixes: 7867b98dceb7 ("scsi: qla2xxx: Fix memory leak in dual/target mode") Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani(a)cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/qla2xxx/qla_mid.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -582,8 +582,9 @@ qla25xx_delete_req_que(struct scsi_qla_h ret = qla25xx_init_req_que(vha, req); if (ret != QLA_SUCCESS) return QLA_FUNCTION_FAILED; + + qla25xx_free_req_que(vha, req); } - qla25xx_free_req_que(vha, req); return ret; } @@ -598,8 +599,9 @@ qla25xx_delete_rsp_que(struct scsi_qla_h ret = qla25xx_init_rsp_que(vha, rsp); if (ret != QLA_SUCCESS) return QLA_FUNCTION_FAILED; + + qla25xx_free_rsp_que(vha, rsp); } - qla25xx_free_rsp_que(vha, rsp); return ret; } Patches currently in stable-queue which might be from himanshu.madhani(a)cavium.com are queue-4.15/scsi-qla2xxx-fix-smatch-warning-in-qla25xx_delete_-rsp-req-_que.patch queue-4.15/scsi-qla2xxx-fix-crashes-in-qla2x00_probe_one-on-probe-failure.patch queue-4.15/scsi-qla2xxx-fix-null-pointer-access-for-fcport-structure.patch

7 years, 6 months

1
0
0 0

Patch "usb: dwc2: fix STM32F7 USB OTG HS compatible" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc2: fix STM32F7 USB OTG HS compatible to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-dwc2-fix-stm32f7-usb-otg-hs-compatible.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1a149e3554e0324a3d551dfb327bdb67b150a320 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay <amelie.delaunay(a)st.com> Date: Thu, 1 Mar 2018 11:05:35 +0100 Subject: usb: dwc2: fix STM32F7 USB OTG HS compatible From: Amelie Delaunay <amelie.delaunay(a)st.com> commit 1a149e3554e0324a3d551dfb327bdb67b150a320 upstream. This patch fixes compatible for STM32F7 USB OTG HS and consistently rename dw2_set_params function. The v2 former patch [1] had been acked by Paul Young, but v1 was merged. [1] https://patchwork.kernel.org/patch/9925573/ Fixes: d8fae8b93682 ("usb: dwc2: add support for STM32F7xx USB OTG HS") Signed-off-by: Amelie Delaunay <amelie.delaunay(a)st.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc2/params.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -137,7 +137,7 @@ static void dwc2_set_stm32f4x9_fsotg_par p->activate_stm_fs_transceiver = true; } -static void dwc2_set_stm32f7xx_hsotg_params(struct dwc2_hsotg *hsotg) +static void dwc2_set_stm32f7_hsotg_params(struct dwc2_hsotg *hsotg) { struct dwc2_core_params *p = &hsotg->params; @@ -164,8 +164,8 @@ const struct of_device_id dwc2_of_match_ { .compatible = "st,stm32f4x9-fsotg", .data = dwc2_set_stm32f4x9_fsotg_params }, { .compatible = "st,stm32f4x9-hsotg" }, - { .compatible = "st,stm32f7xx-hsotg", - .data = dwc2_set_stm32f7xx_hsotg_params }, + { .compatible = "st,stm32f7-hsotg", + .data = dwc2_set_stm32f7_hsotg_params }, {}, }; MODULE_DEVICE_TABLE(of, dwc2_of_match_table); Patches currently in stable-queue which might be from amelie.delaunay(a)st.com are queue-4.15/usb-dwc2-fix-stm32f7-usb-otg-hs-compatible.patch queue-4.15/dt-bindings-usb-fix-the-stm32f7-dwc2-otg-hs-core-binding.patch

7 years, 6 months

1
0
0 0

Patch "scsi: qla2xxx: Fix NULL pointer access for fcport structure" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: qla2xxx: Fix NULL pointer access for fcport structure to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-qla2xxx-fix-null-pointer-access-for-fcport-structure.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 5c25d451163cab9be80744cbc5448d6b95ab8d1a Mon Sep 17 00:00:00 2001 From: Quinn Tran <quinn.tran(a)cavium.com> Date: Thu, 28 Dec 2017 12:33:09 -0800 Subject: scsi: qla2xxx: Fix NULL pointer access for fcport structure From: Quinn Tran <quinn.tran(a)cavium.com> commit 5c25d451163cab9be80744cbc5448d6b95ab8d1a upstream. when processing iocb in a timeout case, driver was trying to log messages without verifying if the fcport structure could have valid data. This results in a NULL pointer access. Fixes: 726b85487067("qla2xxx: Add framework for async fabric discovery") Signed-off-by: Quinn Tran <quinn.tran(a)cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani(a)cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/qla2xxx/qla_init.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -102,11 +102,16 @@ qla2x00_async_iocb_timeout(void *data) struct srb_iocb *lio = &sp->u.iocb_cmd; struct event_arg ea; - ql_dbg(ql_dbg_disc, fcport->vha, 0x2071, - "Async-%s timeout - hdl=%x portid=%06x %8phC.\n", - sp->name, sp->handle, fcport->d_id.b24, fcport->port_name); + if (fcport) { + ql_dbg(ql_dbg_disc, fcport->vha, 0x2071, + "Async-%s timeout - hdl=%x portid=%06x %8phC.\n", + sp->name, sp->handle, fcport->d_id.b24, fcport->port_name); - fcport->flags &= ~FCF_ASYNC_SENT; + fcport->flags &= ~FCF_ASYNC_SENT; + } else { + pr_info("Async-%s timeout - hdl=%x.\n", + sp->name, sp->handle); + } switch (sp->type) { case SRB_LOGIN_CMD: Patches currently in stable-queue which might be from quinn.tran(a)cavium.com are queue-4.15/scsi-qla2xxx-fix-null-pointer-access-for-fcport-structure.patch

7 years, 6 months

1
0
0 0

Patch "scsi: qla2xxx: Fix logo flag for qlt_free_session_done()" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: qla2xxx: Fix logo flag for qlt_free_session_done() to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-qla2xxx-fix-logo-flag-for-qlt_free_session_done.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a2390348c19d0819d525d375414a7cfdacb51a68 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani <hmadhani(a)redhat.com> Date: Mon, 22 Jan 2018 12:04:20 -0800 Subject: scsi: qla2xxx: Fix logo flag for qlt_free_session_done() From: Himanshu Madhani <hmadhani(a)redhat.com> commit a2390348c19d0819d525d375414a7cfdacb51a68 upstream. Commit 3515832cc614 ("scsi: qla2xxx: Reset the logo flag, after target re-login.")fixed the target re-login after session relogin is complete, but missed out the qlt_free_session_done() path. This patch clears send_els_logo flag in qlt_free_session_done() callback. [mkp: checkpatch] Fixes: 3515832cc614 ("scsi: qla2xxx: Reset the logo flag, after target re-login.") Signed-off-by: Himanshu Madhani <hmadhani(a)redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/qla2xxx/qla_target.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -982,6 +982,7 @@ static void qlt_free_session_done(struct logo.id = sess->d_id; logo.cmd_count = 0; + sess->send_els_logo = 0; qlt_send_first_logo(vha, &logo); } Patches currently in stable-queue which might be from hmadhani(a)redhat.com are queue-4.15/scsi-qla2xxx-fix-logo-flag-for-qlt_free_session_done.patch

7 years, 6 months

1
0
0 0

Patch "scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-qla2xxx-fix-crashes-in-qla2x00_probe_one-on-probe-failure.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 6a2cf8d3663e13e19af636c2a8d92e766261dc45 Mon Sep 17 00:00:00 2001 From: Bill Kuzeja <William.Kuzeja(a)stratus.com> Date: Mon, 5 Mar 2018 00:02:55 -0500 Subject: scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure From: Bill Kuzeja <William.Kuzeja(a)stratus.com> commit 6a2cf8d3663e13e19af636c2a8d92e766261dc45 upstream. Because of the shifting around of code in qla2x00_probe_one recently, failures during adapter initialization can lead to problems, i.e. NULL pointer crashes and doubly freed data structures which cause eventual panics. This V2 version makes the relevant memory free routines idempotent, so repeat calls won't cause any harm. I also removed the problematic probe_init_failed exit point as it is not needed. Fixes: d64d6c5671db ("scsi: qla2xxx: Fix NULL pointer crash due to probe failure") Signed-off-by: Bill Kuzeja <william.kuzeja(a)stratus.com> Acked-by: Himanshu Madhani <himanshu.madhani(a)cavium.com> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/qla2xxx/qla_os.c | 59 ++++++++++++++++++++++++++---------------- 1 file changed, 37 insertions(+), 22 deletions(-) --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -449,7 +449,7 @@ static int qla2x00_alloc_queues(struct q ha->req_q_map[0] = req; set_bit(0, ha->rsp_qid_map); set_bit(0, ha->req_qid_map); - return 1; + return 0; fail_qpair_map: kfree(ha->base_qpair); @@ -466,6 +466,9 @@ fail_req_map: static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req) { + if (!ha->req_q_map) + return; + if (IS_QLAFX00(ha)) { if (req && req->ring_fx00) dma_free_coherent(&ha->pdev->dev, @@ -476,14 +479,17 @@ static void qla2x00_free_req_que(struct (req->length + 1) * sizeof(request_t), req->ring, req->dma); - if (req) + if (req) { kfree(req->outstanding_cmds); - - kfree(req); + kfree(req); + } } static void qla2x00_free_rsp_que(struct qla_hw_data *ha, struct rsp_que *rsp) { + if (!ha->rsp_q_map) + return; + if (IS_QLAFX00(ha)) { if (rsp && rsp->ring) dma_free_coherent(&ha->pdev->dev, @@ -494,7 +500,8 @@ static void qla2x00_free_rsp_que(struct (rsp->length + 1) * sizeof(response_t), rsp->ring, rsp->dma); } - kfree(rsp); + if (rsp) + kfree(rsp); } static void qla2x00_free_queues(struct qla_hw_data *ha) @@ -1717,6 +1724,8 @@ qla2x00_abort_all_cmds(scsi_qla_host_t * struct qla_tgt_cmd *cmd; uint8_t trace = 0; + if (!ha->req_q_map) + return; spin_lock_irqsave(&ha->hardware_lock, flags); for (que = 0; que < ha->max_req_queues; que++) { req = ha->req_q_map[que]; @@ -3071,14 +3080,14 @@ qla2x00_probe_one(struct pci_dev *pdev, /* Set up the irqs */ ret = qla2x00_request_irqs(ha, rsp); if (ret) - goto probe_hw_failed; + goto probe_failed; /* Alloc arrays of request and response ring ptrs */ - if (!qla2x00_alloc_queues(ha, req, rsp)) { + if (qla2x00_alloc_queues(ha, req, rsp)) { ql_log(ql_log_fatal, base_vha, 0x003d, "Failed to allocate memory for queue pointers..." "aborting.\n"); - goto probe_init_failed; + goto probe_failed; } if (ha->mqenable && shost_use_blk_mq(host)) { @@ -3363,15 +3372,6 @@ skip_dpc: return 0; -probe_init_failed: - qla2x00_free_req_que(ha, req); - ha->req_q_map[0] = NULL; - clear_bit(0, ha->req_qid_map); - qla2x00_free_rsp_que(ha, rsp); - ha->rsp_q_map[0] = NULL; - clear_bit(0, ha->rsp_qid_map); - ha->max_req_queues = ha->max_rsp_queues = 0; - probe_failed: if (base_vha->timer_active) qla2x00_stop_timer(base_vha); @@ -4451,11 +4451,17 @@ qla2x00_mem_free(struct qla_hw_data *ha) if (ha->init_cb) dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, ha->init_cb, ha->init_cb_dma); - vfree(ha->optrom_buffer); - kfree(ha->nvram); - kfree(ha->npiv_info); - kfree(ha->swl); - kfree(ha->loop_id_map); + + if (ha->optrom_buffer) + vfree(ha->optrom_buffer); + if (ha->nvram) + kfree(ha->nvram); + if (ha->npiv_info) + kfree(ha->npiv_info); + if (ha->swl) + kfree(ha->swl); + if (ha->loop_id_map) + kfree(ha->loop_id_map); ha->srb_mempool = NULL; ha->ctx_mempool = NULL; @@ -4471,6 +4477,15 @@ qla2x00_mem_free(struct qla_hw_data *ha) ha->ex_init_cb_dma = 0; ha->async_pd = NULL; ha->async_pd_dma = 0; + ha->loop_id_map = NULL; + ha->npiv_info = NULL; + ha->optrom_buffer = NULL; + ha->swl = NULL; + ha->nvram = NULL; + ha->mctp_dump = NULL; + ha->dcbx_tlv = NULL; + ha->xgmac_data = NULL; + ha->sfp_data = NULL; ha->s_dma_pool = NULL; ha->dl_dma_pool = NULL; Patches currently in stable-queue which might be from William.Kuzeja(a)stratus.com are queue-4.15/scsi-qla2xxx-fix-crashes-in-qla2x00_probe_one-on-probe-failure.patch

7 years, 6 months

1
0
0 0

Patch "phy: phy-brcm-usb-init: Some Low Speed keyboards fail on 7271" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled phy: phy-brcm-usb-init: Some Low Speed keyboards fail on 7271 to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: phy-phy-brcm-usb-init-some-low-speed-keyboards-fail-on-7271.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 279a0cd0e02aa1e506d9acf94a7ecb530821359c Mon Sep 17 00:00:00 2001 From: Al Cooper <al.cooper(a)broadcom.com> Date: Wed, 27 Dec 2017 14:28:49 -0500 Subject: phy: phy-brcm-usb-init: Some Low Speed keyboards fail on 7271 From: Al Cooper <al.cooper(a)broadcom.com> commit 279a0cd0e02aa1e506d9acf94a7ecb530821359c upstream. Enable the the Low Speed Keep Alive signal on the 7271b0 by setting the LS_KEEP_ALIVE bit in the USB CTRL OBRIDGE register otherwise some Dell Low Speed keyboards fail. Also do a little cleanup of the EBRIDGE ESTOP_SCB_REQ bit. Since this is only used on one platform, remove it from the platform tables and just use "if (family == "). Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver") Signed-off-by: Al Cooper <alcooperx(a)gmail.com> Acked-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/phy/broadcom/phy-brcm-usb-init.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) --- a/drivers/phy/broadcom/phy-brcm-usb-init.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init.c @@ -50,6 +50,8 @@ #define USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK 0x80000000 /* option */ #define USB_CTRL_EBRIDGE 0x0c #define USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK 0x00020000 /* option */ +#define USB_CTRL_OBRIDGE 0x10 +#define USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK 0x08000000 #define USB_CTRL_MDIO 0x14 #define USB_CTRL_MDIO2 0x18 #define USB_CTRL_UTMI_CTL_1 0x2c @@ -116,7 +118,6 @@ enum { USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR, USB_CTRL_SETUP_OC3_DISABLE_SELECTOR, USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR, - USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_SELECTOR, USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR, USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR, USB_CTRL_USB_PM_USB_PWRDN_SELECTOR, @@ -203,7 +204,6 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, USB_CTRL_SETUP_OC3_DISABLE_MASK, 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ - USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK, 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, USB_CTRL_USB_PM_USB_PWRDN_MASK, @@ -225,7 +225,6 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ USB_CTRL_SETUP_OC3_DISABLE_MASK, USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, - USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK, 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ @@ -247,7 +246,6 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, USB_CTRL_SETUP_OC3_DISABLE_MASK, 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ - USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK, USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, USB_CTRL_USB_PM_USB_PWRDN_MASK, @@ -269,7 +267,6 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ USB_CTRL_SETUP_OC3_DISABLE_MASK, USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, - USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK, 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ @@ -291,7 +288,6 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ USB_CTRL_SETUP_OC3_DISABLE_MASK, 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ - USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK, 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK, USB_CTRL_USB_PM_USB_PWRDN_MASK, @@ -313,7 +309,6 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ 0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */ USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, - 0, /* USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK */ 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */ 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ @@ -335,7 +330,6 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, USB_CTRL_SETUP_OC3_DISABLE_MASK, 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ - 0, /* USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK */ USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, USB_CTRL_USB_PM_USB_PWRDN_MASK, @@ -357,7 +351,6 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT 0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */ USB_CTRL_SETUP_OC3_DISABLE_MASK, USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK, - 0, /* USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK */ 0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */ 0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */ 0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */ @@ -379,7 +372,6 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, USB_CTRL_SETUP_OC3_DISABLE_MASK, 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ - USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK, USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, USB_CTRL_USB_PM_USB_PWRDN_MASK, @@ -401,7 +393,6 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT USB_CTRL_SETUP_STRAP_IPP_SEL_MASK, USB_CTRL_SETUP_OC3_DISABLE_MASK, 0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */ - USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK, USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK, USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK, USB_CTRL_USB_PM_USB_PWRDN_MASK, @@ -952,13 +943,17 @@ void brcm_usb_init_eohci(struct brcm_usb * Don't enable this so the memory controller doesn't read * into memory holes. NOTE: This bit is low true on 7366C0. */ - USB_CTRL_SET_FAMILY(params, EBRIDGE, ESTOP_SCB_REQ); + USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ); /* Setup the endian bits */ reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); reg &= ~USB_CTRL_SETUP_ENDIAN_BITS; reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN); brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + + if (params->selected_family == BRCM_FAMILY_7271A0) + /* Enable LS keep alive fix for certain keyboards */ + USB_CTRL_SET(ctrl, OBRIDGE, LS_KEEP_ALIVE); } void brcm_usb_init_xhci(struct brcm_usb_init_params *params) Patches currently in stable-queue which might be from al.cooper(a)broadcom.com are queue-4.15/phy-phy-brcm-usb-init-power-down-usb-3.0-phy-when-xhci-disabled.patch queue-4.15/phy-phy-brcm-usb-init-drd-mode-can-cause-crash-on-startup.patch queue-4.15/phy-phy-brcm-usb-init-some-low-speed-keyboards-fail-on-7271.patch

7 years, 6 months

1
0
0 0

Patch "phy: phy-brcm-usb-init: Power down USB 3.0 PHY when XHCI disabled" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled phy: phy-brcm-usb-init: Power down USB 3.0 PHY when XHCI disabled to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: phy-phy-brcm-usb-init-power-down-usb-3.0-phy-when-xhci-disabled.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From cd6f769fdea7ff7d77a6cc97658c60ca0b836d0e Mon Sep 17 00:00:00 2001 From: Al Cooper <al.cooper(a)broadcom.com> Date: Wed, 27 Dec 2017 14:28:50 -0500 Subject: phy: phy-brcm-usb-init: Power down USB 3.0 PHY when XHCI disabled From: Al Cooper <al.cooper(a)broadcom.com> commit cd6f769fdea7ff7d77a6cc97658c60ca0b836d0e upstream. Set PHY3_IDDQ_OVERRIDE in the xhci uninit routine. This will save additional power when the XHCI driver is not enabled. Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver") Signed-off-by: Al Cooper <alcooperx(a)gmail.com> Acked-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/phy/broadcom/phy-brcm-usb-init.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/phy/broadcom/phy-brcm-usb-init.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init.c @@ -73,6 +73,7 @@ #define USB_CTRL_USB30_CTL1_USB3_IPP_MASK 0x20000000 /* option */ #define USB_CTRL_USB30_PCTL 0x70 #define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK 0x00000002 +#define USB_CTRL_USB30_PCTL_PHY3_IDDQ_OVERRIDE_MASK 0x00008000 #define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK 0x00020000 #define USB_CTRL_USB_DEVICE_CTL1 0x90 #define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 /* option */ @@ -999,6 +1000,7 @@ void brcm_usb_uninit_eohci(struct brcm_u void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params) { brcmusb_xhci_soft_reset(params, 1); + USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE); } void brcm_usb_set_family_map(struct brcm_usb_init_params *params) Patches currently in stable-queue which might be from al.cooper(a)broadcom.com are queue-4.15/phy-phy-brcm-usb-init-power-down-usb-3.0-phy-when-xhci-disabled.patch queue-4.15/phy-phy-brcm-usb-init-drd-mode-can-cause-crash-on-startup.patch queue-4.15/phy-phy-brcm-usb-init-some-low-speed-keyboards-fail-on-7271.patch

7 years, 6 months

1
0
0 0

Patch "phy: phy-brcm-usb-init: DRD mode can cause crash on startup" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled phy: phy-brcm-usb-init: DRD mode can cause crash on startup to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: phy-phy-brcm-usb-init-drd-mode-can-cause-crash-on-startup.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 0aa0c12262fd848c48448c39ff6c1c097be00dd4 Mon Sep 17 00:00:00 2001 From: Al Cooper <al.cooper(a)broadcom.com> Date: Wed, 27 Dec 2017 14:28:51 -0500 Subject: phy: phy-brcm-usb-init: DRD mode can cause crash on startup From: Al Cooper <al.cooper(a)broadcom.com> commit 0aa0c12262fd848c48448c39ff6c1c097be00dd4 upstream. This is caused by a bug in the BDC core. When the BDC core comes out of reset and it's not selected, it gets a backup clock. When the BDC core is selected, it get's the main clock. If HOST mode is then selected the BDC core has the main clock shut off but the backup clock is not restored. The failure scenario and cause are as follows: - DRD mode is active - Device mode is selected first in bootloader - When host mode is now selected, the clock to the BDC is cut off. - BDC registers are inaccessible and therefore the BDC driver crashes upon Linux boot. The fix is to have the phy driver always force a BDC reset on startup. Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver") Signed-off-by: Al Cooper <alcooperx(a)gmail.com> Acked-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/phy/broadcom/phy-brcm-usb-init.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/phy/broadcom/phy-brcm-usb-init.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init.c @@ -917,6 +917,7 @@ void brcm_usb_init_common(struct brcm_us USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); break; default: + USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); USB_CTRL_SET_FAMILY(params, USB_PM, BDC_SOFT_RESETB); break; } Patches currently in stable-queue which might be from al.cooper(a)broadcom.com are queue-4.15/phy-phy-brcm-usb-init-power-down-usb-3.0-phy-when-xhci-disabled.patch queue-4.15/phy-phy-brcm-usb-init-drd-mode-can-cause-crash-on-startup.patch queue-4.15/phy-phy-brcm-usb-init-some-low-speed-keyboards-fail-on-7271.patch

7 years, 6 months

1
0
0 0

Patch "phy: phy-brcm-usb: Fix two DT properties to match bindings doc" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled phy: phy-brcm-usb: Fix two DT properties to match bindings doc to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: phy-phy-brcm-usb-fix-two-dt-properties-to-match-bindings-doc.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 5e498ff117c19fd80181b5bb09ecb024b552ece8 Mon Sep 17 00:00:00 2001 From: Al Cooper <alcooperx(a)gmail.com> Date: Wed, 27 Dec 2017 14:28:48 -0500 Subject: phy: phy-brcm-usb: Fix two DT properties to match bindings doc From: Al Cooper <alcooperx(a)gmail.com> commit 5e498ff117c19fd80181b5bb09ecb024b552ece8 upstream. Change "brcm,has_xhci" and "brcm,has_eohci" device tree properties to the preferred "brcm,has-xhci" and "brcm,has-eohci". This also matches the existing device tree bindings document. Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver") Signed-off-by: Al Cooper <alcooperx(a)gmail.com> Acked-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/phy/broadcom/phy-brcm-usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/phy/broadcom/phy-brcm-usb.c +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -338,9 +338,9 @@ static int brcm_usb_phy_probe(struct pla ARRAY_SIZE(brcm_dr_mode_to_name), mode, &priv->ini.mode); } - if (of_property_read_bool(dn, "brcm,has_xhci")) + if (of_property_read_bool(dn, "brcm,has-xhci")) priv->has_xhci = true; - if (of_property_read_bool(dn, "brcm,has_eohci")) + if (of_property_read_bool(dn, "brcm,has-eohci")) priv->has_eohci = true; err = brcm_usb_phy_dvr_init(dev, priv, dn); Patches currently in stable-queue which might be from alcooperx(a)gmail.com are queue-4.15/phy-phy-brcm-usb-fix-two-dt-properties-to-match-bindings-doc.patch queue-4.15/phy-phy-brcm-usb-init-power-down-usb-3.0-phy-when-xhci-disabled.patch queue-4.15/phy-phy-brcm-usb-init-drd-mode-can-cause-crash-on-startup.patch queue-4.15/phy-phy-brcm-usb-init-some-low-speed-keyboards-fail-on-7271.patch

7 years, 6 months

1
0
0 0

Patch "dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dt-bindings-usb-fix-the-stm32f7-dwc2-otg-hs-core-binding.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4c437920fa216f66f6a5d469cae2a0360cc2d9c7 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay <amelie.delaunay(a)st.com> Date: Thu, 1 Mar 2018 11:05:34 +0100 Subject: dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding From: Amelie Delaunay <amelie.delaunay(a)st.com> commit 4c437920fa216f66f6a5d469cae2a0360cc2d9c7 upstream. This patch fixes binding documentation for DWC2 controller in HS mode found on STMicroelectronics STM32F7 SoC. The v2 former patch [1] had been acked by Rob Herring, but v1 was merged. [1] https://patchwork.kernel.org/patch/9925575/ Fixes: 000777dadc7e ("dt-bindings: usb: Document the STM32F7xx DWC2 ...") Signed-off-by: Amelie Delaunay <amelie.delaunay(a)st.com> Reviewed-by: Rob Herring <robh(a)kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/devicetree/bindings/usb/dwc2.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -19,7 +19,7 @@ Required properties: configured in FS mode; - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs configured in HS mode; - - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs + - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs configured in HS mode; - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt Patches currently in stable-queue which might be from amelie.delaunay(a)st.com are queue-4.15/usb-dwc2-fix-stm32f7-usb-otg-hs-compatible.patch queue-4.15/dt-bindings-usb-fix-the-stm32f7-dwc2-otg-hs-core-binding.patch

7 years, 6 months

1
0
0 0

Patch "USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-gadget-udc-add-missing-platform_device_put-on-error-in-bdc_pci_probe.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun <weiyongjun1(a)huawei.com> Date: Tue, 23 Jan 2018 09:35:14 +0000 Subject: USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe() From: Wei Yongjun <weiyongjun1(a)huawei.com> commit 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 upstream. Add the missing platform_device_put() before return from bdc_pci_probe() in the platform_device_add_resources() error handling case. Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/gadget/udc/bdc/bdc_pci.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/usb/gadget/udc/bdc/bdc_pci.c +++ b/drivers/usb/gadget/udc/bdc/bdc_pci.c @@ -82,6 +82,7 @@ static int bdc_pci_probe(struct pci_dev if (ret) { dev_err(&pci->dev, "couldn't add resources to bdc device\n"); + platform_device_put(bdc); return ret; } Patches currently in stable-queue which might be from weiyongjun1(a)huawei.com are queue-4.14/usb-gadget-udc-add-missing-platform_device_put-on-error-in-bdc_pci_probe.patch

7 years, 6 months

1
0
0 0

Patch "scsi: qla2xxx: Fix smatch warning in qla25xx_delete_{rsp|req}_que" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: qla2xxx: Fix smatch warning in qla25xx_delete_{rsp|req}_que to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-qla2xxx-fix-smatch-warning-in-qla25xx_delete_-rsp-req-_que.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 62aa281470fdb7c0796d63a1cc918a8c1f02dde2 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani <himanshu.madhani(a)cavium.com> Date: Sat, 16 Dec 2017 16:05:09 -0800 Subject: scsi: qla2xxx: Fix smatch warning in qla25xx_delete_{rsp|req}_que From: Himanshu Madhani <himanshu.madhani(a)cavium.com> commit 62aa281470fdb7c0796d63a1cc918a8c1f02dde2 upstream. This patch fixes following warnings reported by smatch: drivers/scsi/qla2xxx/qla_mid.c:586 qla25xx_delete_req_que() error: we previously assumed 'req' could be null (see line 580) drivers/scsi/qla2xxx/qla_mid.c:602 qla25xx_delete_rsp_que() error: we previously assumed 'rsp' could be null (see line 596) Fixes: 7867b98dceb7 ("scsi: qla2xxx: Fix memory leak in dual/target mode") Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani(a)cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/qla2xxx/qla_mid.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -582,8 +582,9 @@ qla25xx_delete_req_que(struct scsi_qla_h ret = qla25xx_init_req_que(vha, req); if (ret != QLA_SUCCESS) return QLA_FUNCTION_FAILED; + + qla25xx_free_req_que(vha, req); } - qla25xx_free_req_que(vha, req); return ret; } @@ -598,8 +599,9 @@ qla25xx_delete_rsp_que(struct scsi_qla_h ret = qla25xx_init_rsp_que(vha, rsp); if (ret != QLA_SUCCESS) return QLA_FUNCTION_FAILED; + + qla25xx_free_rsp_que(vha, rsp); } - qla25xx_free_rsp_que(vha, rsp); return ret; } Patches currently in stable-queue which might be from himanshu.madhani(a)cavium.com are queue-4.14/scsi-qla2xxx-fix-smatch-warning-in-qla25xx_delete_-rsp-req-_que.patch queue-4.14/scsi-qla2xxx-fix-crashes-in-qla2x00_probe_one-on-probe-failure.patch queue-4.14/scsi-qla2xxx-fix-null-pointer-access-for-fcport-structure.patch

7 years, 6 months

1
0
0 0

Patch "usb: dwc3: Fix GDBGFIFOSPACE_TYPE values" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc3: Fix GDBGFIFOSPACE_TYPE values to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-dwc3-fix-gdbgfifospace_type-values.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b16ea8b9492e99e03b1269fe93ebdbf8e4eabf8a Mon Sep 17 00:00:00 2001 From: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com> Date: Fri, 2 Feb 2018 13:21:35 -0800 Subject: usb: dwc3: Fix GDBGFIFOSPACE_TYPE values From: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com> commit b16ea8b9492e99e03b1269fe93ebdbf8e4eabf8a upstream. The FIFO/Queue type values are incorrect. Correct them according to DWC_usb3 programming guide section 1.2.27 (or DWC_usb31 section 1.2.25). Additionally, this patch includes ProtocolStatusQ and AuxEventQ types. Fixes: cf6d867d3b57 ("usb: dwc3: core: add fifo space helper") Signed-off-by: Thinh Nguyen <thinhn(a)synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc3/core.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -166,13 +166,15 @@ #define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0) #define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff) -#define DWC3_TXFIFOQ 1 -#define DWC3_RXFIFOQ 3 -#define DWC3_TXREQQ 5 -#define DWC3_RXREQQ 7 -#define DWC3_RXINFOQ 9 -#define DWC3_DESCFETCHQ 13 -#define DWC3_EVENTQ 15 +#define DWC3_TXFIFOQ 0 +#define DWC3_RXFIFOQ 1 +#define DWC3_TXREQQ 2 +#define DWC3_RXREQQ 3 +#define DWC3_RXINFOQ 4 +#define DWC3_PSTATQ 5 +#define DWC3_DESCFETCHQ 6 +#define DWC3_EVENTQ 7 +#define DWC3_AUXEVENTQ 8 /* Global RX Threshold Configuration Register */ #define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19) Patches currently in stable-queue which might be from Thinh.Nguyen(a)synopsys.com are queue-4.14/usb-dwc3-fix-gdbgfifospace_type-values.patch

7 years, 6 months

1
0
0 0

Patch "scsi: qla2xxx: Fix NULL pointer access for fcport structure" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: qla2xxx: Fix NULL pointer access for fcport structure to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-qla2xxx-fix-null-pointer-access-for-fcport-structure.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 5c25d451163cab9be80744cbc5448d6b95ab8d1a Mon Sep 17 00:00:00 2001 From: Quinn Tran <quinn.tran(a)cavium.com> Date: Thu, 28 Dec 2017 12:33:09 -0800 Subject: scsi: qla2xxx: Fix NULL pointer access for fcport structure From: Quinn Tran <quinn.tran(a)cavium.com> commit 5c25d451163cab9be80744cbc5448d6b95ab8d1a upstream. when processing iocb in a timeout case, driver was trying to log messages without verifying if the fcport structure could have valid data. This results in a NULL pointer access. Fixes: 726b85487067("qla2xxx: Add framework for async fabric discovery") Signed-off-by: Quinn Tran <quinn.tran(a)cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani(a)cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/qla2xxx/qla_init.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -102,11 +102,16 @@ qla2x00_async_iocb_timeout(void *data) struct srb_iocb *lio = &sp->u.iocb_cmd; struct event_arg ea; - ql_dbg(ql_dbg_disc, fcport->vha, 0x2071, - "Async-%s timeout - hdl=%x portid=%06x %8phC.\n", - sp->name, sp->handle, fcport->d_id.b24, fcport->port_name); + if (fcport) { + ql_dbg(ql_dbg_disc, fcport->vha, 0x2071, + "Async-%s timeout - hdl=%x portid=%06x %8phC.\n", + sp->name, sp->handle, fcport->d_id.b24, fcport->port_name); - fcport->flags &= ~FCF_ASYNC_SENT; + fcport->flags &= ~FCF_ASYNC_SENT; + } else { + pr_info("Async-%s timeout - hdl=%x.\n", + sp->name, sp->handle); + } switch (sp->type) { case SRB_LOGIN_CMD: Patches currently in stable-queue which might be from quinn.tran(a)cavium.com are queue-4.14/scsi-qla2xxx-fix-null-pointer-access-for-fcport-structure.patch

7 years, 6 months

1
0
0 0

Patch "scsi: qla2xxx: Fix logo flag for qlt_free_session_done()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: qla2xxx: Fix logo flag for qlt_free_session_done() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-qla2xxx-fix-logo-flag-for-qlt_free_session_done.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a2390348c19d0819d525d375414a7cfdacb51a68 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani <hmadhani(a)redhat.com> Date: Mon, 22 Jan 2018 12:04:20 -0800 Subject: scsi: qla2xxx: Fix logo flag for qlt_free_session_done() From: Himanshu Madhani <hmadhani(a)redhat.com> commit a2390348c19d0819d525d375414a7cfdacb51a68 upstream. Commit 3515832cc614 ("scsi: qla2xxx: Reset the logo flag, after target re-login.")fixed the target re-login after session relogin is complete, but missed out the qlt_free_session_done() path. This patch clears send_els_logo flag in qlt_free_session_done() callback. [mkp: checkpatch] Fixes: 3515832cc614 ("scsi: qla2xxx: Reset the logo flag, after target re-login.") Signed-off-by: Himanshu Madhani <hmadhani(a)redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/qla2xxx/qla_target.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -971,6 +971,7 @@ static void qlt_free_session_done(struct logo.id = sess->d_id; logo.cmd_count = 0; + sess->send_els_logo = 0; qlt_send_first_logo(vha, &logo); } Patches currently in stable-queue which might be from hmadhani(a)redhat.com are queue-4.14/scsi-qla2xxx-fix-logo-flag-for-qlt_free_session_done.patch

7 years, 6 months

1
0
0 0

Patch "scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-qla2xxx-fix-crashes-in-qla2x00_probe_one-on-probe-failure.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 6a2cf8d3663e13e19af636c2a8d92e766261dc45 Mon Sep 17 00:00:00 2001 From: Bill Kuzeja <William.Kuzeja(a)stratus.com> Date: Mon, 5 Mar 2018 00:02:55 -0500 Subject: scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure From: Bill Kuzeja <William.Kuzeja(a)stratus.com> commit 6a2cf8d3663e13e19af636c2a8d92e766261dc45 upstream. Because of the shifting around of code in qla2x00_probe_one recently, failures during adapter initialization can lead to problems, i.e. NULL pointer crashes and doubly freed data structures which cause eventual panics. This V2 version makes the relevant memory free routines idempotent, so repeat calls won't cause any harm. I also removed the problematic probe_init_failed exit point as it is not needed. Fixes: d64d6c5671db ("scsi: qla2xxx: Fix NULL pointer crash due to probe failure") Signed-off-by: Bill Kuzeja <william.kuzeja(a)stratus.com> Acked-by: Himanshu Madhani <himanshu.madhani(a)cavium.com> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/qla2xxx/qla_os.c | 59 ++++++++++++++++++++++++++---------------- 1 file changed, 37 insertions(+), 22 deletions(-) --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -442,7 +442,7 @@ static int qla2x00_alloc_queues(struct q ha->req_q_map[0] = req; set_bit(0, ha->rsp_qid_map); set_bit(0, ha->req_qid_map); - return 1; + return 0; fail_qpair_map: kfree(ha->base_qpair); @@ -459,6 +459,9 @@ fail_req_map: static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req) { + if (!ha->req_q_map) + return; + if (IS_QLAFX00(ha)) { if (req && req->ring_fx00) dma_free_coherent(&ha->pdev->dev, @@ -469,14 +472,17 @@ static void qla2x00_free_req_que(struct (req->length + 1) * sizeof(request_t), req->ring, req->dma); - if (req) + if (req) { kfree(req->outstanding_cmds); - - kfree(req); + kfree(req); + } } static void qla2x00_free_rsp_que(struct qla_hw_data *ha, struct rsp_que *rsp) { + if (!ha->rsp_q_map) + return; + if (IS_QLAFX00(ha)) { if (rsp && rsp->ring) dma_free_coherent(&ha->pdev->dev, @@ -487,7 +493,8 @@ static void qla2x00_free_rsp_que(struct (rsp->length + 1) * sizeof(response_t), rsp->ring, rsp->dma); } - kfree(rsp); + if (rsp) + kfree(rsp); } static void qla2x00_free_queues(struct qla_hw_data *ha) @@ -1710,6 +1717,8 @@ qla2x00_abort_all_cmds(scsi_qla_host_t * struct qla_tgt_cmd *cmd; uint8_t trace = 0; + if (!ha->req_q_map) + return; spin_lock_irqsave(&ha->hardware_lock, flags); for (que = 0; que < ha->max_req_queues; que++) { req = ha->req_q_map[que]; @@ -3063,14 +3072,14 @@ qla2x00_probe_one(struct pci_dev *pdev, /* Set up the irqs */ ret = qla2x00_request_irqs(ha, rsp); if (ret) - goto probe_hw_failed; + goto probe_failed; /* Alloc arrays of request and response ring ptrs */ - if (!qla2x00_alloc_queues(ha, req, rsp)) { + if (qla2x00_alloc_queues(ha, req, rsp)) { ql_log(ql_log_fatal, base_vha, 0x003d, "Failed to allocate memory for queue pointers..." "aborting.\n"); - goto probe_init_failed; + goto probe_failed; } if (ha->mqenable && shost_use_blk_mq(host)) { @@ -3347,15 +3356,6 @@ skip_dpc: return 0; -probe_init_failed: - qla2x00_free_req_que(ha, req); - ha->req_q_map[0] = NULL; - clear_bit(0, ha->req_qid_map); - qla2x00_free_rsp_que(ha, rsp); - ha->rsp_q_map[0] = NULL; - clear_bit(0, ha->rsp_qid_map); - ha->max_req_queues = ha->max_rsp_queues = 0; - probe_failed: if (base_vha->timer_active) qla2x00_stop_timer(base_vha); @@ -4435,11 +4435,17 @@ qla2x00_mem_free(struct qla_hw_data *ha) if (ha->init_cb) dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, ha->init_cb, ha->init_cb_dma); - vfree(ha->optrom_buffer); - kfree(ha->nvram); - kfree(ha->npiv_info); - kfree(ha->swl); - kfree(ha->loop_id_map); + + if (ha->optrom_buffer) + vfree(ha->optrom_buffer); + if (ha->nvram) + kfree(ha->nvram); + if (ha->npiv_info) + kfree(ha->npiv_info); + if (ha->swl) + kfree(ha->swl); + if (ha->loop_id_map) + kfree(ha->loop_id_map); ha->srb_mempool = NULL; ha->ctx_mempool = NULL; @@ -4455,6 +4461,15 @@ qla2x00_mem_free(struct qla_hw_data *ha) ha->ex_init_cb_dma = 0; ha->async_pd = NULL; ha->async_pd_dma = 0; + ha->loop_id_map = NULL; + ha->npiv_info = NULL; + ha->optrom_buffer = NULL; + ha->swl = NULL; + ha->nvram = NULL; + ha->mctp_dump = NULL; + ha->dcbx_tlv = NULL; + ha->xgmac_data = NULL; + ha->sfp_data = NULL; ha->s_dma_pool = NULL; ha->dl_dma_pool = NULL; Patches currently in stable-queue which might be from William.Kuzeja(a)stratus.com are queue-4.14/scsi-qla2xxx-fix-crashes-in-qla2x00_probe_one-on-probe-failure.patch

7 years, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror