This is a note to let you know that I've just added the patch titled
mmc: sdhci-of-esdhc: fix the mmc error after sleep on ls1046ardb
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
mmc-sdhci-of-esdhc-fix-the-mmc-error-after-sleep-on-ls1046ardb.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From f2bc600008bd6f7f5d0b6b56238d14f95cd454d2 Mon Sep 17 00:00:00 2001
From: "yinbo.zhu" <yinbo.zhu(a)nxp.com>
Date: Fri, 1 Dec 2017 15:09:34 +0800
Subject: mmc: sdhci-of-esdhc: fix the mmc error after sleep on ls1046ardb
From: yinbo.zhu <yinbo.zhu(a)nxp.com>
commit f2bc600008bd6f7f5d0b6b56238d14f95cd454d2 upstream.
When system wakes up from sleep on ls1046ardb, the SD operation fails
with mmc error messages since ESDHC_TB_EN bit couldn't be cleaned by
eSDHC_SYSCTL[RSTA]. It's proper to clean this bit in esdhc_reset()
rather than in probe.
Signed-off-by: yinbo.zhu <yinbo.zhu(a)nxp.com>
Acked-by: Yangbo Lu <yangbo.lu(a)nxp.com>
Acked-by: Adrian Hunter <adrian.hunter(a)intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org>
Cc: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/mmc/host/sdhci-of-esdhc.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -589,10 +589,18 @@ static void esdhc_pltfm_set_bus_width(st
static void esdhc_reset(struct sdhci_host *host, u8 mask)
{
+ u32 val;
+
sdhci_reset(host, mask);
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+
+ if (mask & SDHCI_RESET_ALL) {
+ val = sdhci_readl(host, ESDHC_TBCTL);
+ val &= ~ESDHC_TB_EN;
+ sdhci_writel(host, val, ESDHC_TBCTL);
+ }
}
/* The SCFG, Supplemental Configuration Unit, provides SoC specific
@@ -785,10 +793,6 @@ static void esdhc_init(struct platform_d
pltfm_host = sdhci_priv(host);
esdhc = sdhci_pltfm_priv(pltfm_host);
- val = sdhci_readl(host, ESDHC_TBCTL);
- val &= ~ESDHC_TB_EN;
- sdhci_writel(host, val, ESDHC_TBCTL);
-
host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
SDHCI_VENDOR_VER_SHIFT;
Patches currently in stable-queue which might be from yinbo.zhu(a)nxp.com are
queue-4.14/mmc-sdhci-of-esdhc-fix-the-mmc-error-after-sleep-on-ls1046ardb.patch
queue-4.14/mmc-sdhci-of-esdhc-fix-emmc-couldn-t-work-after-kexec.patch
This is a note to let you know that I've just added the patch titled
mmc: sdhci-of-esdhc: fix eMMC couldn't work after kexec
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
mmc-sdhci-of-esdhc-fix-emmc-couldn-t-work-after-kexec.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 97618aca1440b5addc5c3d78659d3e176be23b80 Mon Sep 17 00:00:00 2001
From: "yinbo.zhu" <yinbo.zhu(a)nxp.com>
Date: Wed, 8 Nov 2017 17:09:50 +0800
Subject: mmc: sdhci-of-esdhc: fix eMMC couldn't work after kexec
From: yinbo.zhu <yinbo.zhu(a)nxp.com>
commit 97618aca1440b5addc5c3d78659d3e176be23b80 upstream.
The bit eSDHC_TBCTL[TB_EN] couldn't be reset by eSDHC_SYSCTL[RSTA] which is
used to reset for all. The driver should make sure it's cleared before card
initialization, otherwise the initialization would fail.
Signed-off-by: yinbo.zhu <yinbo.zhu(a)nxp.com>
Acked-by: Adrian Hunter <adrian.hunter(a)intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org>
Cc: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/mmc/host/sdhci-of-esdhc.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -785,6 +785,10 @@ static void esdhc_init(struct platform_d
pltfm_host = sdhci_priv(host);
esdhc = sdhci_pltfm_priv(pltfm_host);
+ val = sdhci_readl(host, ESDHC_TBCTL);
+ val &= ~ESDHC_TB_EN;
+ sdhci_writel(host, val, ESDHC_TBCTL);
+
host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
SDHCI_VENDOR_VER_SHIFT;
Patches currently in stable-queue which might be from yinbo.zhu(a)nxp.com are
queue-4.14/mmc-sdhci-of-esdhc-fix-the-mmc-error-after-sleep-on-ls1046ardb.patch
queue-4.14/mmc-sdhci-of-esdhc-fix-emmc-couldn-t-work-after-kexec.patch
This is a note to let you know that I've just added the patch titled
mmc: sdhci-of-esdhc: disable SD clock for clock value 0
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
mmc-sdhci-of-esdhc-disable-sd-clock-for-clock-value-0.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From dd3f6983b4a468efca9e8caa0e2b4aa20946d801 Mon Sep 17 00:00:00 2001
From: yangbo lu <yangbo.lu(a)nxp.com>
Date: Thu, 21 Sep 2017 16:43:31 +0800
Subject: mmc: sdhci-of-esdhc: disable SD clock for clock value 0
From: yangbo lu <yangbo.lu(a)nxp.com>
commit dd3f6983b4a468efca9e8caa0e2b4aa20946d801 upstream.
SD clock should be disabled for clock value 0. It's not
right to just return. This may cause failure of signal
voltage switching.
Signed-off-by: Yangbo Lu <yangbo.lu(a)nxp.com>
Acked-by: Adrian Hunter <adrian.hunter(a)intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org>
Cc: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/mmc/host/sdhci-of-esdhc.c | 58 +++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 28 deletions(-)
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -458,6 +458,33 @@ static unsigned int esdhc_of_get_min_clo
return clock / 256 / 16;
}
+static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
+{
+ u32 val;
+ ktime_t timeout;
+
+ val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+
+ if (enable)
+ val |= ESDHC_CLOCK_SDCLKEN;
+ else
+ val &= ~ESDHC_CLOCK_SDCLKEN;
+
+ sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ val = ESDHC_CLOCK_STABLE;
+ while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
+ if (ktime_after(ktime_get(), timeout)) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ break;
+ }
+ udelay(10);
+ }
+}
+
static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -469,8 +496,10 @@ static void esdhc_of_set_clock(struct sd
host->mmc->actual_clock = 0;
- if (clock == 0)
+ if (clock == 0) {
+ esdhc_clock_enable(host, false);
return;
+ }
/* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
if (esdhc->vendor_ver < VENDOR_V_23)
@@ -558,33 +587,6 @@ static void esdhc_pltfm_set_bus_width(st
sdhci_writel(host, ctrl, ESDHC_PROCTL);
}
-static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
-{
- u32 val;
- ktime_t timeout;
-
- val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
-
- if (enable)
- val |= ESDHC_CLOCK_SDCLKEN;
- else
- val &= ~ESDHC_CLOCK_SDCLKEN;
-
- sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
-
- /* Wait max 20 ms */
- timeout = ktime_add_ms(ktime_get(), 20);
- val = ESDHC_CLOCK_STABLE;
- while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
- if (ktime_after(ktime_get(), timeout)) {
- pr_err("%s: Internal clock never stabilised.\n",
- mmc_hostname(host->mmc));
- break;
- }
- udelay(10);
- }
-}
-
static void esdhc_reset(struct sdhci_host *host, u8 mask)
{
sdhci_reset(host, mask);
Patches currently in stable-queue which might be from yangbo.lu(a)nxp.com are
queue-4.14/mmc-sdhci-of-esdhc-fix-the-mmc-error-after-sleep-on-ls1046ardb.patch
queue-4.14/mmc-sdhci-of-esdhc-disable-sd-clock-for-clock-value-0.patch
This is a note to let you know that I've just added the patch titled
media: r820t: fix r820t_write_reg for KASAN
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
media-r820t-fix-r820t_write_reg-for-kasan.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Thu, 30 Nov 2017 06:08:05 -0500
Subject: media: r820t: fix r820t_write_reg for KASAN
From: Arnd Bergmann <arnd(a)arndb.de>
commit 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 upstream.
With CONFIG_KASAN, we get an overly long stack frame due to inlining
the register access functions:
drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7':
drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
This is caused by a gcc bug that has now been fixed in gcc-8.
To work around the problem, we can pass the register data
through a local variable that older gcc versions can optimize
out as well.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/media/tuners/r820t.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/media/tuners/r820t.c
+++ b/drivers/media/tuners/r820t.c
@@ -396,9 +396,11 @@ static int r820t_write(struct r820t_priv
return 0;
}
-static int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
+static inline int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
{
- return r820t_write(priv, reg, &val, 1);
+ u8 tmp = val; /* work around GCC PR81715 with asan-stack=1 */
+
+ return r820t_write(priv, reg, &tmp, 1);
}
static int r820t_read_cache_reg(struct r820t_priv *priv, int reg)
@@ -411,17 +413,18 @@ static int r820t_read_cache_reg(struct r
return -EINVAL;
}
-static int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
+static inline int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
u8 bit_mask)
{
+ u8 tmp = val;
int rc = r820t_read_cache_reg(priv, reg);
if (rc < 0)
return rc;
- val = (rc & ~bit_mask) | (val & bit_mask);
+ tmp = (rc & ~bit_mask) | (tmp & bit_mask);
- return r820t_write(priv, reg, &val, 1);
+ return r820t_write(priv, reg, &tmp, 1);
}
static int r820t_read(struct r820t_priv *priv, u8 reg, u8 *val, int len)
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-4.14/arm-spear600-add-missing-interrupt-parent-of-rtc.patch
queue-4.14/media-r820t-fix-r820t_write_reg-for-kasan.patch
queue-4.14/arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch
queue-4.14/kselftest-fix-oom-in-memory-compaction-test.patch
queue-4.14/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch
queue-4.14/arm-dts-delete-bogus-reference-to-the-charlcd.patch
queue-4.14/mm-hide-a-warning-for-compile_test.patch
queue-4.14/tracing-prevent-profile_all_branches-when-fortify_source-y.patch
queue-4.14/arm-pxa-tosa-bt-add-module_license-tag.patch
queue-4.14/arm-lpc3250-fix-uda1380-gpio-numbers.patch
queue-4.14/arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
queue-4.14/bluetooth-bt_hciuart-now-depends-on-serial_dev_bus.patch
queue-4.14/arm-spear13xx-fix-dmas-cells.patch
queue-4.14/arm-dts-exynos-fix-rtc-interrupt-for-exynos5410.patch
queue-4.14/arm-dts-nomadik-add-interrupt-parent-for-clcd.patch
This is a note to let you know that I've just added the patch titled
Bluetooth: BT_HCIUART now depends on SERIAL_DEV_BUS
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
bluetooth-bt_hciuart-now-depends-on-serial_dev_bus.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 05e89fb576f580ac95e7a5d00bdb34830b09671a Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Wed, 11 Oct 2017 15:47:54 +0200
Subject: Bluetooth: BT_HCIUART now depends on SERIAL_DEV_BUS
From: Arnd Bergmann <arnd(a)arndb.de>
commit 05e89fb576f580ac95e7a5d00bdb34830b09671a upstream.
It is no longer possible to build BT_HCIUART into the kernel
when SERIAL_DEV_BUS is a loadable module, even if none of the
SERIAL_DEV_BUS based implementations are selected:
drivers/bluetooth/hci_ldisc.o: In function `hci_uart_set_flow_control':
hci_ldisc.c:(.text+0xb40): undefined reference to `serdev_device_set_flow_control'
hci_ldisc.c:(.text+0xb5c): undefined reference to `serdev_device_set_tiocm'
This adds a dependency to avoid the broken configuration.
Fixes: 7841d554809b ("Bluetooth: hci_uart_set_flow_control: Fix NULL deref when using serdev")
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/bluetooth/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -66,6 +66,7 @@ config BT_HCIBTSDIO
config BT_HCIUART
tristate "HCI UART driver"
+ depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
depends on TTY
help
Bluetooth HCI UART driver.
@@ -80,7 +81,6 @@ config BT_HCIUART
config BT_HCIUART_SERDEV
bool
depends on SERIAL_DEV_BUS && BT_HCIUART
- depends on SERIAL_DEV_BUS=y || SERIAL_DEV_BUS=BT_HCIUART
default y
config BT_HCIUART_H4
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-4.14/arm-spear600-add-missing-interrupt-parent-of-rtc.patch
queue-4.14/media-r820t-fix-r820t_write_reg-for-kasan.patch
queue-4.14/arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch
queue-4.14/kselftest-fix-oom-in-memory-compaction-test.patch
queue-4.14/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch
queue-4.14/arm-dts-delete-bogus-reference-to-the-charlcd.patch
queue-4.14/mm-hide-a-warning-for-compile_test.patch
queue-4.14/tracing-prevent-profile_all_branches-when-fortify_source-y.patch
queue-4.14/arm-pxa-tosa-bt-add-module_license-tag.patch
queue-4.14/arm-lpc3250-fix-uda1380-gpio-numbers.patch
queue-4.14/arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
queue-4.14/bluetooth-bt_hciuart-now-depends-on-serial_dev_bus.patch
queue-4.14/arm-spear13xx-fix-dmas-cells.patch
queue-4.14/arm-dts-exynos-fix-rtc-interrupt-for-exynos5410.patch
queue-4.14/arm-dts-nomadik-add-interrupt-parent-for-clcd.patch
This is a note to let you know that I've just added the patch titled
ASoC: acpi: fix machine driver selection based on quirk
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
asoc-acpi-fix-machine-driver-selection-based-on-quirk.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 5c256045b87b8aa8e5bc9d2e2fdc0802351c1f99 Mon Sep 17 00:00:00 2001
From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com>
Date: Fri, 5 Jan 2018 14:55:33 -0600
Subject: ASoC: acpi: fix machine driver selection based on quirk
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com>
commit 5c256045b87b8aa8e5bc9d2e2fdc0802351c1f99 upstream.
The ACPI/machine-driver code refactoring introduced in 4.13 introduced
a regression for cases where we need a DMI-based quirk to select the
machine driver (the BIOS reports an invalid HID). The fix is just to
make sure the results of the quirk are actually used.
Fixes: 54746dabf770 ('ASoC: Improve machine driver selection based on quirk data')
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691
Tested-by: Nicole Færber <nicole.faerber(a)dpin.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com>
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Cc: stable(a)vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
sound/soc/intel/common/sst-match-acpi.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/sound/soc/intel/common/sst-match-acpi.c
+++ b/sound/soc/intel/common/sst-match-acpi.c
@@ -83,11 +83,9 @@ struct sst_acpi_mach *sst_acpi_find_mach
for (mach = machines; mach->id[0]; mach++) {
if (sst_acpi_check_hid(mach->id) == true) {
- if (mach->machine_quirk == NULL)
- return mach;
-
- if (mach->machine_quirk(mach) != NULL)
- return mach;
+ if (mach->machine_quirk)
+ mach = mach->machine_quirk(mach);
+ return mach;
}
}
return NULL;
Patches currently in stable-queue which might be from pierre-louis.bossart(a)linux.intel.com are
queue-4.14/asoc-acpi-fix-machine-driver-selection-based-on-quirk.patch
This is a note to let you know that I've just added the patch titled
arm64: dts: msm8916: Add missing #phy-cells
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm64-dts-msm8916-add-missing-phy-cells.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From b0ab681285aa66064f2de5b74191c0cabba381ff Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <bjorn.andersson(a)linaro.org>
Date: Tue, 7 Nov 2017 19:45:01 -0800
Subject: arm64: dts: msm8916: Add missing #phy-cells
From: Bjorn Andersson <bjorn.andersson(a)linaro.org>
commit b0ab681285aa66064f2de5b74191c0cabba381ff upstream.
Add a missing #phy-cells to the dsi-phy, to silence dtc warning.
Cc: Archit Taneja <architt(a)codeaurora.org>
Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Bjorn Andersson <bjorn.andersson(a)linaro.org>
Reviewed-by: Archit Taneja <architt(a)codeaurora.org>
Signed-off-by: Andy Gross <andy.gross(a)linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -901,6 +901,7 @@
"dsi_phy_regulator";
#clock-cells = <1>;
+ #phy-cells = <0>;
clocks = <&gcc GCC_MDSS_AHB_CLK>;
clock-names = "iface_clk";
Patches currently in stable-queue which might be from bjorn.andersson(a)linaro.org are
queue-4.14/pm-devfreq-propagate-error-from-devfreq_add_device.patch
queue-4.14/arm64-dts-msm8916-add-missing-phy-cells.patch
queue-4.14/arm64-dts-msm8916-correct-ipc-references-for-smsm.patch
This is a note to let you know that I've just added the patch titled
ARM: pxa/tosa-bt: add MODULE_LICENSE tag
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm-pxa-tosa-bt-add-module_license-tag.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 3343647813fdf0f2409fbf5816ee3e0622168079 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Wed, 10 Jan 2018 15:40:37 +0100
Subject: ARM: pxa/tosa-bt: add MODULE_LICENSE tag
From: Arnd Bergmann <arnd(a)arndb.de>
commit 3343647813fdf0f2409fbf5816ee3e0622168079 upstream.
Without this tag, we get a build warning:
WARNING: modpost: missing MODULE_LICENSE() in arch/arm/mach-pxa/tosa-bt.o
For completeness, I'm also adding author and description fields.
Acked-by: Robert Jarzmik <robert.jarzmik(a)free.fr>
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm/mach-pxa/tosa-bt.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -132,3 +132,7 @@ static struct platform_driver tosa_bt_dr
},
};
module_platform_driver(tosa_bt_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Bluetooth built-in chip control");
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-4.14/arm-spear600-add-missing-interrupt-parent-of-rtc.patch
queue-4.14/media-r820t-fix-r820t_write_reg-for-kasan.patch
queue-4.14/arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch
queue-4.14/kselftest-fix-oom-in-memory-compaction-test.patch
queue-4.14/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch
queue-4.14/arm-dts-delete-bogus-reference-to-the-charlcd.patch
queue-4.14/mm-hide-a-warning-for-compile_test.patch
queue-4.14/tracing-prevent-profile_all_branches-when-fortify_source-y.patch
queue-4.14/arm-pxa-tosa-bt-add-module_license-tag.patch
queue-4.14/arm-lpc3250-fix-uda1380-gpio-numbers.patch
queue-4.14/arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
queue-4.14/bluetooth-bt_hciuart-now-depends-on-serial_dev_bus.patch
queue-4.14/arm-spear13xx-fix-dmas-cells.patch
queue-4.14/arm-dts-exynos-fix-rtc-interrupt-for-exynos5410.patch
queue-4.14/arm-dts-nomadik-add-interrupt-parent-for-clcd.patch
This is a note to let you know that I've just added the patch titled
ARM: dts: s5pv210: add interrupt-parent for ohci
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 5c1037196b9ee75897c211972de370ed1336ec8f Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Wed, 10 Jan 2018 17:10:11 +0100
Subject: ARM: dts: s5pv210: add interrupt-parent for ohci
From: Arnd Bergmann <arnd(a)arndb.de>
commit 5c1037196b9ee75897c211972de370ed1336ec8f upstream.
The ohci-hcd node has an interrupt number but no interrupt-parent,
leading to a warning with current dtc versions:
arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
As seen from the related exynos dts files, the ohci and ehci controllers
always share one interrupt number, and the number is the same here as
well, so setting the same interrupt-parent is the reasonable solution
here.
Reviewed-by: Krzysztof Kozlowski <krzk(a)kernel.org>
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm/boot/dts/s5pv210.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -463,6 +463,7 @@
compatible = "samsung,exynos4210-ohci";
reg = <0xec300000 0x100>;
interrupts = <23>;
+ interrupt-parent = <&vic1>;
clocks = <&clocks CLK_USB_HOST>;
clock-names = "usbhost";
#address-cells = <1>;
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-4.14/arm-spear600-add-missing-interrupt-parent-of-rtc.patch
queue-4.14/media-r820t-fix-r820t_write_reg-for-kasan.patch
queue-4.14/arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch
queue-4.14/kselftest-fix-oom-in-memory-compaction-test.patch
queue-4.14/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch
queue-4.14/arm-dts-delete-bogus-reference-to-the-charlcd.patch
queue-4.14/mm-hide-a-warning-for-compile_test.patch
queue-4.14/tracing-prevent-profile_all_branches-when-fortify_source-y.patch
queue-4.14/arm-pxa-tosa-bt-add-module_license-tag.patch
queue-4.14/arm-lpc3250-fix-uda1380-gpio-numbers.patch
queue-4.14/arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
queue-4.14/bluetooth-bt_hciuart-now-depends-on-serial_dev_bus.patch
queue-4.14/arm-spear13xx-fix-dmas-cells.patch
queue-4.14/arm-dts-exynos-fix-rtc-interrupt-for-exynos5410.patch
queue-4.14/arm-dts-nomadik-add-interrupt-parent-for-clcd.patch
This is a note to let you know that I've just added the patch titled
arm: dts: mt7623: Update ethsys binding
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm-dts-mt7623-update-ethsys-binding.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 76a09ce214addb8ddc0f6d50dc1106a5f829e713 Mon Sep 17 00:00:00 2001
From: Matthias Brugger <matthias.bgg(a)gmail.com>
Date: Fri, 1 Dec 2017 13:07:07 +0100
Subject: arm: dts: mt7623: Update ethsys binding
From: Matthias Brugger <matthias.bgg(a)gmail.com>
commit 76a09ce214addb8ddc0f6d50dc1106a5f829e713 upstream.
The ethsys binding misses the reset-cells, this patch
adds this property.
Reviewed-by: Rob Herring <robh(a)kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg(a)gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm/boot/dts/mt7623.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -753,6 +753,7 @@
"syscon";
reg = <0 0x1b000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
eth: ethernet@1b100000 {
Patches currently in stable-queue which might be from matthias.bgg(a)gmail.com are
queue-4.14/arm-dts-mt7623-update-ethsys-binding.patch
queue-4.14/arm-dts-mt2701-add-reset-cells.patch
queue-4.14/arm-dts-mt7623-fix-card-detection-issue-on-bananapi-r2.patch
This is a note to let you know that I've just added the patch titled
arm: dts: mt2701: Add reset-cells
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm-dts-mt2701-add-reset-cells.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From ae72e95b5e4ded145bfc6926ad9457b74e3af41a Mon Sep 17 00:00:00 2001
From: Matthias Brugger <matthias.bgg(a)gmail.com>
Date: Fri, 1 Dec 2017 13:07:08 +0100
Subject: arm: dts: mt2701: Add reset-cells
From: Matthias Brugger <matthias.bgg(a)gmail.com>
commit ae72e95b5e4ded145bfc6926ad9457b74e3af41a upstream.
The hifsys and ethsys needs the definition of the reset-cells
property. Fix this.
Reviewed-by: Rob Herring <robh(a)kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg(a)gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm/boot/dts/mt2701.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -593,6 +593,7 @@
compatible = "mediatek,mt2701-hifsys", "syscon";
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
usb0: usb@1a1c0000 {
@@ -677,6 +678,7 @@
compatible = "mediatek,mt2701-ethsys", "syscon";
reg = <0 0x1b000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
eth: ethernet@1b100000 {
Patches currently in stable-queue which might be from matthias.bgg(a)gmail.com are
queue-4.14/arm-dts-mt7623-update-ethsys-binding.patch
queue-4.14/arm-dts-mt2701-add-reset-cells.patch
queue-4.14/arm-dts-mt7623-fix-card-detection-issue-on-bananapi-r2.patch
This is a note to let you know that I've just added the patch titled
ARM: dts: exynos: fix RTC interrupt for exynos5410
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm-dts-exynos-fix-rtc-interrupt-for-exynos5410.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 5628a8ca14149ba4226e3bdce3a04c3b688435ad Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Thu, 21 Dec 2017 22:30:07 +0100
Subject: ARM: dts: exynos: fix RTC interrupt for exynos5410
From: Arnd Bergmann <arnd(a)arndb.de>
commit 5628a8ca14149ba4226e3bdce3a04c3b688435ad upstream.
According to the comment added to exynos_dt_pmu_match[] in commit
8b283c025443 ("ARM: exynos4/5: convert pmu wakeup to stacked domains"),
the RTC is not able to wake up the system through the PMU on Exynos5410,
unlike Exynos5420.
However, when the RTC DT node got added, it was a straight copy of
the Exynos5420 node, which now causes a warning from dtc.
This removes the incorrect interrupt-parent, which should get the
interrupt working and avoid the warning.
Fixes: e1e146b1b062 ("ARM: dts: exynos: Add RTC and I2C to Exynos5410")
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm/boot/dts/exynos5410.dtsi | 1 -
1 file changed, 1 deletion(-)
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -333,7 +333,6 @@
&rtc {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
- interrupt-parent = <&pmu_system_controller>;
status = "disabled";
};
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-4.14/arm-spear600-add-missing-interrupt-parent-of-rtc.patch
queue-4.14/media-r820t-fix-r820t_write_reg-for-kasan.patch
queue-4.14/arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch
queue-4.14/kselftest-fix-oom-in-memory-compaction-test.patch
queue-4.14/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch
queue-4.14/arm-dts-delete-bogus-reference-to-the-charlcd.patch
queue-4.14/mm-hide-a-warning-for-compile_test.patch
queue-4.14/tracing-prevent-profile_all_branches-when-fortify_source-y.patch
queue-4.14/arm-pxa-tosa-bt-add-module_license-tag.patch
queue-4.14/arm-lpc3250-fix-uda1380-gpio-numbers.patch
queue-4.14/arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
queue-4.14/bluetooth-bt_hciuart-now-depends-on-serial_dev_bus.patch
queue-4.14/arm-spear13xx-fix-dmas-cells.patch
queue-4.14/arm-dts-exynos-fix-rtc-interrupt-for-exynos5410.patch
queue-4.14/arm-dts-nomadik-add-interrupt-parent-for-clcd.patch
This is a note to let you know that I've just added the patch titled
ARM: dts: Delete bogus reference to the charlcd
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm-dts-delete-bogus-reference-to-the-charlcd.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 586b2a4befad88cd87b372a1cea01e58c6811ea9 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij(a)linaro.org>
Date: Tue, 2 Jan 2018 08:57:17 +0100
Subject: ARM: dts: Delete bogus reference to the charlcd
From: Linus Walleij <linus.walleij(a)linaro.org>
commit 586b2a4befad88cd87b372a1cea01e58c6811ea9 upstream.
The EB MP board probably has a character LCD but the board manual does
not really state which IRQ it has assigned to this device. The invalid
assignment was a mistake by me during submission of the DTSI where I was
looking for the reference, didn't find it and didn't fill it in.
Delete this for now: it can probably be fixed but that requires access
to the actual board for some trial-and-error experiments.
Reported-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org>
Signed-off-by: Olof Johansson <olof(a)lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm/boot/dts/arm-realview-eb-mp.dtsi | 5 -----
1 file changed, 5 deletions(-)
--- a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
@@ -150,11 +150,6 @@
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
};
-&charlcd {
- interrupt-parent = <&intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-};
-
&serial0 {
interrupt-parent = <&intc>;
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
Patches currently in stable-queue which might be from linus.walleij(a)linaro.org are
queue-4.14/arm-dts-delete-bogus-reference-to-the-charlcd.patch
queue-4.14/mmc-sdhci-implement-an-sdhci-specific-bounce-buffer.patch
queue-4.14/arm-dts-nomadik-add-interrupt-parent-for-clcd.patch
This is a note to let you know that I've just added the patch titled
ARM: pxa/tosa-bt: add MODULE_LICENSE tag
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm-pxa-tosa-bt-add-module_license-tag.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 3343647813fdf0f2409fbf5816ee3e0622168079 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Wed, 10 Jan 2018 15:40:37 +0100
Subject: ARM: pxa/tosa-bt: add MODULE_LICENSE tag
From: Arnd Bergmann <arnd(a)arndb.de>
commit 3343647813fdf0f2409fbf5816ee3e0622168079 upstream.
Without this tag, we get a build warning:
WARNING: modpost: missing MODULE_LICENSE() in arch/arm/mach-pxa/tosa-bt.o
For completeness, I'm also adding author and description fields.
Acked-by: Robert Jarzmik <robert.jarzmik(a)free.fr>
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm/mach-pxa/tosa-bt.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -132,3 +132,7 @@ static struct platform_driver tosa_bt_dr
},
};
module_platform_driver(tosa_bt_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Bluetooth built-in chip control");
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-4.4/arm-spear600-add-missing-interrupt-parent-of-rtc.patch
queue-4.4/media-r820t-fix-r820t_write_reg-for-kasan.patch
queue-4.4/arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch
queue-4.4/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch
queue-4.4/x86-fix-build-warnign-with-32-bit-pae.patch
queue-4.4/mm-hide-a-warning-for-compile_test.patch
queue-4.4/arm-pxa-tosa-bt-add-module_license-tag.patch
queue-4.4/arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
queue-4.4/arm-spear13xx-fix-dmas-cells.patch
This is a note to let you know that I've just added the patch titled
media: r820t: fix r820t_write_reg for KASAN
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
media-r820t-fix-r820t_write_reg-for-kasan.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Thu, 30 Nov 2017 06:08:05 -0500
Subject: media: r820t: fix r820t_write_reg for KASAN
From: Arnd Bergmann <arnd(a)arndb.de>
commit 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 upstream.
With CONFIG_KASAN, we get an overly long stack frame due to inlining
the register access functions:
drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7':
drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
This is caused by a gcc bug that has now been fixed in gcc-8.
To work around the problem, we can pass the register data
through a local variable that older gcc versions can optimize
out as well.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/media/tuners/r820t.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/media/tuners/r820t.c
+++ b/drivers/media/tuners/r820t.c
@@ -410,9 +410,11 @@ static int r820t_write(struct r820t_priv
return 0;
}
-static int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
+static inline int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
{
- return r820t_write(priv, reg, &val, 1);
+ u8 tmp = val; /* work around GCC PR81715 with asan-stack=1 */
+
+ return r820t_write(priv, reg, &tmp, 1);
}
static int r820t_read_cache_reg(struct r820t_priv *priv, int reg)
@@ -425,17 +427,18 @@ static int r820t_read_cache_reg(struct r
return -EINVAL;
}
-static int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
+static inline int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
u8 bit_mask)
{
+ u8 tmp = val;
int rc = r820t_read_cache_reg(priv, reg);
if (rc < 0)
return rc;
- val = (rc & ~bit_mask) | (val & bit_mask);
+ tmp = (rc & ~bit_mask) | (tmp & bit_mask);
- return r820t_write(priv, reg, &val, 1);
+ return r820t_write(priv, reg, &tmp, 1);
}
static int r820t_read(struct r820t_priv *priv, u8 reg, u8 *val, int len)
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-4.4/arm-spear600-add-missing-interrupt-parent-of-rtc.patch
queue-4.4/media-r820t-fix-r820t_write_reg-for-kasan.patch
queue-4.4/arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch
queue-4.4/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch
queue-4.4/x86-fix-build-warnign-with-32-bit-pae.patch
queue-4.4/mm-hide-a-warning-for-compile_test.patch
queue-4.4/arm-pxa-tosa-bt-add-module_license-tag.patch
queue-4.4/arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
queue-4.4/arm-spear13xx-fix-dmas-cells.patch
This is a note to let you know that I've just added the patch titled
ARM: dts: s5pv210: add interrupt-parent for ohci
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 5c1037196b9ee75897c211972de370ed1336ec8f Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Wed, 10 Jan 2018 17:10:11 +0100
Subject: ARM: dts: s5pv210: add interrupt-parent for ohci
From: Arnd Bergmann <arnd(a)arndb.de>
commit 5c1037196b9ee75897c211972de370ed1336ec8f upstream.
The ohci-hcd node has an interrupt number but no interrupt-parent,
leading to a warning with current dtc versions:
arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
As seen from the related exynos dts files, the ohci and ehci controllers
always share one interrupt number, and the number is the same here as
well, so setting the same interrupt-parent is the reasonable solution
here.
Reviewed-by: Krzysztof Kozlowski <krzk(a)kernel.org>
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm/boot/dts/s5pv210.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -461,6 +461,7 @@
compatible = "samsung,exynos4210-ohci";
reg = <0xec300000 0x100>;
interrupts = <23>;
+ interrupt-parent = <&vic1>;
clocks = <&clocks CLK_USB_HOST>;
clock-names = "usbhost";
#address-cells = <1>;
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-4.4/arm-spear600-add-missing-interrupt-parent-of-rtc.patch
queue-4.4/media-r820t-fix-r820t_write_reg-for-kasan.patch
queue-4.4/arm-dts-sti-add-gpio-polarity-for-hdmi-hpd-gpio-property.patch
queue-4.4/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch
queue-4.4/x86-fix-build-warnign-with-32-bit-pae.patch
queue-4.4/mm-hide-a-warning-for-compile_test.patch
queue-4.4/arm-pxa-tosa-bt-add-module_license-tag.patch
queue-4.4/arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
queue-4.4/arm-spear13xx-fix-dmas-cells.patch
This is a note to let you know that I've just added the patch titled
media: r820t: fix r820t_write_reg for KASAN
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
media-r820t-fix-r820t_write_reg-for-kasan.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Thu, 30 Nov 2017 06:08:05 -0500
Subject: media: r820t: fix r820t_write_reg for KASAN
From: Arnd Bergmann <arnd(a)arndb.de>
commit 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 upstream.
With CONFIG_KASAN, we get an overly long stack frame due to inlining
the register access functions:
drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7':
drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
This is caused by a gcc bug that has now been fixed in gcc-8.
To work around the problem, we can pass the register data
through a local variable that older gcc versions can optimize
out as well.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/media/tuners/r820t.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/media/tuners/r820t.c
+++ b/drivers/media/tuners/r820t.c
@@ -410,9 +410,11 @@ static int r820t_write(struct r820t_priv
return 0;
}
-static int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
+static inline int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
{
- return r820t_write(priv, reg, &val, 1);
+ u8 tmp = val; /* work around GCC PR81715 with asan-stack=1 */
+
+ return r820t_write(priv, reg, &tmp, 1);
}
static int r820t_read_cache_reg(struct r820t_priv *priv, int reg)
@@ -425,17 +427,18 @@ static int r820t_read_cache_reg(struct r
return -EINVAL;
}
-static int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
+static inline int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
u8 bit_mask)
{
+ u8 tmp = val;
int rc = r820t_read_cache_reg(priv, reg);
if (rc < 0)
return rc;
- val = (rc & ~bit_mask) | (val & bit_mask);
+ tmp = (rc & ~bit_mask) | (tmp & bit_mask);
- return r820t_write(priv, reg, &val, 1);
+ return r820t_write(priv, reg, &tmp, 1);
}
static int r820t_read(struct r820t_priv *priv, u8 reg, u8 *val, int len)
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-3.18/arm-spear600-add-missing-interrupt-parent-of-rtc.patch
queue-3.18/media-r820t-fix-r820t_write_reg-for-kasan.patch
queue-3.18/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch
queue-3.18/arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
queue-3.18/arm-spear13xx-fix-dmas-cells.patch
This is a note to let you know that I've just added the patch titled
ARM: dts: s5pv210: add interrupt-parent for ohci
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 5c1037196b9ee75897c211972de370ed1336ec8f Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd(a)arndb.de>
Date: Wed, 10 Jan 2018 17:10:11 +0100
Subject: ARM: dts: s5pv210: add interrupt-parent for ohci
From: Arnd Bergmann <arnd(a)arndb.de>
commit 5c1037196b9ee75897c211972de370ed1336ec8f upstream.
The ohci-hcd node has an interrupt number but no interrupt-parent,
leading to a warning with current dtc versions:
arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
As seen from the related exynos dts files, the ohci and ehci controllers
always share one interrupt number, and the number is the same here as
well, so setting the same interrupt-parent is the reasonable solution
here.
Reviewed-by: Krzysztof Kozlowski <krzk(a)kernel.org>
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm/boot/dts/s5pv210.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -461,6 +461,7 @@
compatible = "samsung,exynos4210-ohci";
reg = <0xec300000 0x100>;
interrupts = <23>;
+ interrupt-parent = <&vic1>;
clocks = <&clocks CLK_USB_HOST>;
clock-names = "usbhost";
#address-cells = <1>;
Patches currently in stable-queue which might be from arnd(a)arndb.de are
queue-3.18/arm-spear600-add-missing-interrupt-parent-of-rtc.patch
queue-3.18/media-r820t-fix-r820t_write_reg-for-kasan.patch
queue-3.18/arm-spear13xx-fix-spics-gpio-controller-s-warning.patch
queue-3.18/arm-dts-s5pv210-add-interrupt-parent-for-ohci.patch
queue-3.18/arm-spear13xx-fix-dmas-cells.patch
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 31747eda41ef3c30c09c5c096b380bf54013746a Mon Sep 17 00:00:00 2001
From: Amir Goldstein <amir73il(a)gmail.com>
Date: Sun, 14 Jan 2018 18:35:40 +0200
Subject: [PATCH] ovl: hash directory inodes for fsnotify
fsnotify pins a watched directory inode in cache, but if directory dentry
is released, new lookup will allocate a new dentry and a new inode.
Directory events will be notified on the new inode, while fsnotify listener
is watching the old pinned inode.
Hash all directory inodes to reuse the pinned inode on lookup. Pure upper
dirs are hashes by real upper inode, merge and lower dirs are hashed by
real lower inode.
The reference to lower inode was being held by the lower dentry object
in the overlay dentry (oe->lowerstack[0]). Releasing the overlay dentry
may drop lower inode refcount to zero. Add a refcount on behalf of the
overlay inode to prevent that.
As a by-product, hashing directory inodes also detects multiple
redirected dirs to the same lower dir and uncovered redirected dir
target on and returns -ESTALE on lookup.
The reported issue dates back to initial version of overlayfs, but this
patch depends on ovl_inode code that was introduced in kernel v4.13.
Cc: <stable(a)vger.kernel.org> #v4.13
Reported-by: Niklas Cassel <niklas.cassel(a)axis.com>
Signed-off-by: Amir Goldstein <amir73il(a)gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com>
Tested-by: Niklas Cassel <niklas.cassel(a)axis.com>
diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index 00b6b294272a..94d2f8a8b779 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -606,6 +606,16 @@ static int ovl_inode_set(struct inode *inode, void *data)
static bool ovl_verify_inode(struct inode *inode, struct dentry *lowerdentry,
struct dentry *upperdentry)
{
+ if (S_ISDIR(inode->i_mode)) {
+ /* Real lower dir moved to upper layer under us? */
+ if (!lowerdentry && ovl_inode_lower(inode))
+ return false;
+
+ /* Lookup of an uncovered redirect origin? */
+ if (!upperdentry && ovl_inode_upper(inode))
+ return false;
+ }
+
/*
* Allow non-NULL lower inode in ovl_inode even if lowerdentry is NULL.
* This happens when finding a copied up overlay inode for a renamed
@@ -633,6 +643,8 @@ struct inode *ovl_get_inode(struct dentry *dentry, struct dentry *upperdentry,
struct inode *inode;
/* Already indexed or could be indexed on copy up? */
bool indexed = (index || (ovl_indexdir(dentry->d_sb) && !upperdentry));
+ struct dentry *origin = indexed ? lowerdentry : NULL;
+ bool is_dir;
if (WARN_ON(upperdentry && indexed && !lowerdentry))
return ERR_PTR(-EIO);
@@ -641,15 +653,19 @@ struct inode *ovl_get_inode(struct dentry *dentry, struct dentry *upperdentry,
realinode = d_inode(lowerdentry);
/*
- * Copy up origin (lower) may exist for non-indexed upper, but we must
- * not use lower as hash key in that case.
- * Hash inodes that are or could be indexed by origin inode and
- * non-indexed upper inodes that could be hard linked by upper inode.
+ * Copy up origin (lower) may exist for non-indexed non-dir upper, but
+ * we must not use lower as hash key in that case.
+ * Hash non-dir that is or could be indexed by origin inode.
+ * Hash dir that is or could be merged by origin inode.
+ * Hash pure upper and non-indexed non-dir by upper inode.
*/
- if (!S_ISDIR(realinode->i_mode) && (upperdentry || indexed)) {
- struct inode *key = d_inode(indexed ? lowerdentry :
- upperdentry);
- unsigned int nlink;
+ is_dir = S_ISDIR(realinode->i_mode);
+ if (is_dir)
+ origin = lowerdentry;
+
+ if (upperdentry || origin) {
+ struct inode *key = d_inode(origin ?: upperdentry);
+ unsigned int nlink = is_dir ? 1 : realinode->i_nlink;
inode = iget5_locked(dentry->d_sb, (unsigned long) key,
ovl_inode_test, ovl_inode_set, key);
@@ -670,8 +686,9 @@ struct inode *ovl_get_inode(struct dentry *dentry, struct dentry *upperdentry,
goto out;
}
- nlink = ovl_get_nlink(lowerdentry, upperdentry,
- realinode->i_nlink);
+ /* Recalculate nlink for non-dir due to indexing */
+ if (!is_dir)
+ nlink = ovl_get_nlink(lowerdentry, upperdentry, nlink);
set_nlink(inode, nlink);
} else {
inode = new_inode(dentry->d_sb);
@@ -685,7 +702,7 @@ struct inode *ovl_get_inode(struct dentry *dentry, struct dentry *upperdentry,
ovl_set_flag(OVL_IMPURE, inode);
/* Check for non-merge dir that may have whiteouts */
- if (S_ISDIR(realinode->i_mode)) {
+ if (is_dir) {
struct ovl_entry *oe = dentry->d_fsdata;
if (((upperdentry && lowerdentry) || oe->numlower > 1) ||
diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
index 76440feb79f6..1a436fa92a04 100644
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -211,6 +211,7 @@ static void ovl_destroy_inode(struct inode *inode)
struct ovl_inode *oi = OVL_I(inode);
dput(oi->__upperdentry);
+ iput(oi->lower);
kfree(oi->redirect);
ovl_dir_cache_free(inode);
mutex_destroy(&oi->lock);
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c
index d6bb1c9f5e7a..06119f34a69d 100644
--- a/fs/overlayfs/util.c
+++ b/fs/overlayfs/util.c
@@ -257,7 +257,7 @@ void ovl_inode_init(struct inode *inode, struct dentry *upperdentry,
if (upperdentry)
OVL_I(inode)->__upperdentry = upperdentry;
if (lowerdentry)
- OVL_I(inode)->lower = d_inode(lowerdentry);
+ OVL_I(inode)->lower = igrab(d_inode(lowerdentry));
ovl_copyattr(d_inode(upperdentry ?: lowerdentry), inode);
}
@@ -273,7 +273,7 @@ void ovl_inode_update(struct inode *inode, struct dentry *upperdentry)
*/
smp_wmb();
OVL_I(inode)->__upperdentry = upperdentry;
- if (!S_ISDIR(upperinode->i_mode) && inode_unhashed(inode)) {
+ if (inode_unhashed(inode)) {
inode->i_private = upperinode;
__insert_inode_hash(inode, (unsigned long) upperinode);
}
The ACPI/machine-driver code refactoring introduced in 4.13 introduced
a regression for cases where we need a DMI-based quirk to select the
machine driver (the BIOS reports an invalid HID). The fix is just to
make sure the results of the quirk are actually used.
back-ported to 4.14-stable from commit 5c256045b87b ("ASoC: acpi: fix
machine driver selection based on quirk") which did not apply cleanly.
Fixes: 54746dabf770 ('ASoC: Improve machine driver selection based on quirk data')
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691
Tested-by: Nicole Færber <nicole.faerber(a)dpin.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com>
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Cc: stable(a)vger.kernel.org
---
sound/soc/intel/common/sst-match-acpi.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/sound/soc/intel/common/sst-match-acpi.c b/sound/soc/intel/common/sst-match-acpi.c
index 56d26f36a3cb..b4a929562218 100644
--- a/sound/soc/intel/common/sst-match-acpi.c
+++ b/sound/soc/intel/common/sst-match-acpi.c
@@ -83,11 +83,9 @@ struct sst_acpi_mach *sst_acpi_find_machine(struct sst_acpi_mach *machines)
for (mach = machines; mach->id[0]; mach++) {
if (sst_acpi_check_hid(mach->id) == true) {
- if (mach->machine_quirk == NULL)
- return mach;
-
- if (mach->machine_quirk(mach) != NULL)
- return mach;
+ if (mach->machine_quirk)
+ mach = mach->machine_quirk(mach);
+ return mach;
}
}
return NULL;
--
2.14.1
Hi,
Please consider adding
dd3f6983b4a4 mmc: sdhci-of-esdhc: disable SD clock for clock value 0
97618aca1440 mmc: sdhci-of-esdhc: fix eMMC couldn't work after kexec
f2bc600008bd mmc: sdhci-of-esdhc: fix the mmc error after sleep on
ls1046ardb
(present in mainline since 4.15-rc1, 4.16-rc1 and 4.16-rc1,
respectively) to 4.14-stable.
The third removes all the code added by the second, but the clearing of
the ESDHC_TB_EN bit from esdhc_init() (whose sole user is esdhc_probe)
still happens during esdhc_probe() due to
esdhc_probe() ->
sdhci_add_host() ->
__sdhci_add_host() ->
sdhci_init(soft=0) ->
sdhci_do_reset(host, mask=SDHCI_RESET_ALL) ->
host->ops->reset(host, mask);
Presumably they could/should have been squashed, but I suppose -stable
prefers keeping a 1-1 correspondence with mainline when possible.
Thanks,
Rasmus
On Tue, Feb 20, 2018 at 1:47 PM, Olof's autobuilder <build(a)lixom.net> wrote:
> Warnings:
>
> arm64.allmodconfig:
> drivers/media/tuners/r820t.c:1334:1: warning: the frame size of 2896 bytes is larger than 2048 bytes [-Wframe-larger-than=]
Hi Greg,
please add
16c3ada89cff ("media: r820t: fix r820t_write_reg for KASAN")
This is an old bug, but hasn't shown up before as the stack warning
limit was turned off
in allmodconfig kernels. The fix is also on the backport lists I sent
for 4.9 and 4.4.
Arnd
On Mon, Feb 5, 2018 at 9:49 PM, kernelci.org bot <bot(a)kernelci.org> wrote:
>
> stable-rc/linux-4.15.y build: 185 builds: 0 failed, 185 passed, 46 warnings (v4.15.1-61-g7ab5513e4cbc)
Hi Greg,
FYI, the device tree compiler warnings are all fixed in
linux-4.16-rc1. These are basically fixes
that we ended up not submitting last minute for the release after one
of them (the USB PHY
one, if you remember) had blown up.
Anyway, I think the risk is rather low for any of them (they are
mostly platforms that
are not widely used, and the fixes make things work that didn't), so
to get a clean
build, feel free to pick up the remaining patches from mainline now or
after -rc1:
> Warnings Detected:
>
> Warnings summary:
> 2 arch/arm/boot/dts/spear1340-evb.dtb: Warning (dmas_property): Property 'dmas', cell 4 is not a phandle reference in /ahb/apb/serial@b4100000
> 2 arch/arm/boot/dts/spear1340-evb.dtb: Warning (dmas_property): Missing property '#dma-cells' in node /interrupt-controller@ec801000 or bad phandle (referred from /ahb/apb/serial@b4100000:dmas[4])
cdd104099141 ("arm: spear13xx: Fix dmas cells")
> 2 arch/arm/boot/dts/spear1310-evb.dtb: Warning (gpios_property): Property 'cs-gpios', cell 6 is not a phandle reference in /ahb/apb/spi@e0100000
> 2 arch/arm/boot/dts/spear1310-evb.dtb: Warning (gpios_property): Missing property '#gpio-cells' in node /interrupt-controller@ec801000 or bad phandle (referred from /ahb/apb/spi@e0100000:cs-gpios[6])
f8975cb1b8a3 ("arm: spear13xx: Fix spics gpio controller's warning")
> 2 arch/arm/boot/dts/exynos5410-smdk5410.dtb: Warning (interrupts_property): Missing interrupt-controller or interrupt-map property in /soc/system-controller@10040000
> 2 arch/arm/boot/dts/exynos5410-smdk5410.dtb: Warning (interrupts_property): Missing #interrupt-cells in interrupt-parent /soc/system-controller@10040000
> 2 arch/arm/boot/dts/exynos5410-odroidxu.dtb: Warning (interrupts_property): Missing interrupt-controller or interrupt-map property in /soc/system-controller@10040000
> 2 arch/arm/boot/dts/exynos5410-odroidxu.dtb: Warning (interrupts_property): Missing #interrupt-cells in interrupt-parent /soc/system-controller@10040000
5628a8ca1414 ("ARM: dts: exynos: fix RTC interrupt for exynos5410")
> 2 WARNING: modpost: missing MODULE_LICENSE() in arch/arm/mach-pxa/tosa-bt.o
3343647813fd ("ARM: pxa/tosa-bt: add MODULE_LICENSE tag")
> 1 arch/arm64/boot/dts/qcom/msm8916-mtp.dtb: Warning (phys_property): Missing property '#phy-cells' in node /soc/mdss@1a00000/dsi-phy@1a98300 or bad phandle (referred from /soc/mdss@1a00000/dsi@1a98000:phys[0])
> 1 arch/arm64/boot/dts/qcom/apq8016-sbc.dtb: Warning (phys_property): Missing property '#phy-cells' in node /soc/mdss@1a00000/dsi-phy@1a98300 or bad phandle (referred from /soc/mdss@1a00000/dsi@1a98000:phys[0])
b0ab681285aa ("arm64: dts: msm8916: Add missing #phy-cells")
> 1 arch/arm64/boot/dts/mediatek/mt8173-evb.dtb: Warning (cooling_device_property): Missing property '#cooling-cells' in node /cpus/cpu@100 or bad phandle (referred from /thermal-zones/cpu_thermal/cooling-maps/map@1:cooling-device[0])
> 1 arch/arm64/boot/dts/mediatek/mt8173-evb.dtb: Warning (cooling_device_property): Missing property '#cooling-cells' in node /cpus/cpu@0 or bad phandle (referred from /thermal-zones/cpu_thermal/cooling-maps/map@0:cooling-device[0])
acbf76ee0506 ("arm64: dts: add #cooling-cells to CPU nodes")
> 1 arch/arm/boot/dts/stih410-b2260.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
> 1 arch/arm/boot/dts/stih410-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
> 1 arch/arm/boot/dts/stih407-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
7ac1f59c09a6 ("ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property")
> 1 arch/arm/boot/dts/ste-nomadik-s8815.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000
> 1 arch/arm/boot/dts/ste-nomadik-nhk15.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000
e8bfa0422469 ("ARM: dts: nomadik: add interrupt-parent for clcd")
> 1 arch/arm/boot/dts/spear600-evb.dtb: Warning (interrupts_property): Missing interrupt-parent for /ahb/apb/rtc@fc900000
6ffb5b4f248f ("arm: spear600: Add missing interrupt-parent of rtc")
> 1 arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
> 1 arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
> 1 arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
> 1 arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
> 1 arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
5c1037196b9e ("ARM: dts: s5pv210: add interrupt-parent for ohci")
> 1 arch/arm/boot/dts/mt7623n-rfb-nand.dtb: Warning (resets_property): Missing property '#reset-cells' in node /syscon@1b000000 or bad phandle (referred from /ethernet@1b100000:resets[0])
> 1 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dtb: Warning (resets_property): Missing property '#reset-cells' in node /syscon@1b000000 or bad phandle (referred from /ethernet@1b100000:resets[0])
76a09ce214ad ("arm: dts: mt7623: Update ethsys binding")
> 1 arch/arm/boot/dts/mt2701-evb.dtb: Warning (resets_property): Missing property '#reset-cells' in node /syscon@1b000000 or bad phandle (referred from /ethernet@1b100000:resets[0])
ae72e95b5e4d ("arm: dts: mt2701: Add reset-cells")
> 1 arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
> 1 arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
> 1 arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
> 1 arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
ca32e0c4bf9c ("ARM: lpc3250: fix uda1380 gpio numbers")
> 1 arch/arm/boot/dts/arm-realview-eb-a9mp.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /fpga/charlcd@10008000
> 1 arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /fpga/charlcd@10008000
> 1 arch/arm/boot/dts/arm-realview-eb-11mp.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /fpga/charlcd@10008000
> 1 arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /fpga/charlcd@10008000
> 1 arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /fpga/charlcd@10008000
> 1 arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /fpga/charlcd@10008000
586b2a4befad ("ARM: dts: Delete bogus reference to the charlcd")
Arnd
When KMEMCHECK is enabled without UNWINDER_FRAME_POINTER, we get a
Kconfig warning, presumably harmless:
warning: (FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && KMEMCHECK && LOCKDEP && UNWINDER_FRAME_POINTER) selects FRAME_POINTER which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || SUPERH || BLACKFIN || MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS || !UNWINDER_ORC && !UNWINDER_GUESS)
In newer mainline kernels, the KMEMCHECK option has been removed, so
this no longer happens. Adding the unwinder as a direct dependency
for KMEMCHECK works for 4.14-stable as well and documents the
dependency better.
Fixes: 81d387190039 ("x86/kconfig: Consolidate unwinders into multiple choice selection")
Cc: Josh Poimboeuf <jpoimboe(a)redhat.com>
Signed-off-by: Arnd Bergmann <arnd(a)arndb.de>
---
arch/x86/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 17de6acc0eab..3fc58c1a166b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -111,7 +111,7 @@ config X86
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KASAN if X86_64
select HAVE_ARCH_KGDB
- select HAVE_ARCH_KMEMCHECK
+ select HAVE_ARCH_KMEMCHECK if !UNWINDER_ORC && !UNWINDER_GUESS
select HAVE_ARCH_MMAP_RND_BITS if MMU
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT
select HAVE_ARCH_COMPAT_MMAP_BASES if MMU && COMPAT
--
2.9.0
> As already explained in the previous mail, there is a fixup for this in
> commit 81b6c9998979 ('scsi: core: check for device state in
> __scsi_remove_target()').
> Please check if this is applied, too.
I tested commit 81b6c9998979 cherry-picked on top of 4.14.20 and it
indeed solves the problem.
Can it be backported to 4.14 LTS, please?