- Linux-stable-mirror - lists.linaro.org

Patch "dm raid: fix raid set size revalidation" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dm raid: fix raid set size revalidation to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dm-raid-fix-raid-set-size-revalidation.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Heinz Mauelshagen <heinzm(a)redhat.com> Date: Sat, 2 Dec 2017 01:03:51 +0100 Subject: dm raid: fix raid set size revalidation From: Heinz Mauelshagen <heinzm(a)redhat.com> [ Upstream commit 61e06e2c3ebd986050958513bfa40dceed756f8f ] The raid set size is being revalidated unconditionally before a reshaping conversion is started. MD requires the size to only be reduced in case of a stripe removing (i.e. shrinking) reshape but not when growing because the raid array has to stay small until after the growing reshape finishes. Fix by avoiding the size revalidation in preresume unless a shrinking reshape is requested. Signed-off-by: Heinz Mauelshagen <heinzm(a)redhat.com> Signed-off-by: Mike Snitzer <snitzer(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/dm-raid.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -675,15 +675,11 @@ static struct raid_type *get_raid_type_b return NULL; } -/* - * Conditionally change bdev capacity of @rs - * in case of a disk add/remove reshape - */ -static void rs_set_capacity(struct raid_set *rs) +/* Adjust rdev sectors */ +static void rs_set_rdev_sectors(struct raid_set *rs) { struct mddev *mddev = &rs->md; struct md_rdev *rdev; - struct gendisk *gendisk = dm_disk(dm_table_get_md(rs->ti->table)); /* * raid10 sets rdev->sector to the device size, which @@ -692,8 +688,16 @@ static void rs_set_capacity(struct raid_ rdev_for_each(rdev, mddev) if (!test_bit(Journal, &rdev->flags)) rdev->sectors = mddev->dev_sectors; +} - set_capacity(gendisk, mddev->array_sectors); +/* + * Change bdev capacity of @rs in case of a disk add/remove reshape + */ +static void rs_set_capacity(struct raid_set *rs) +{ + struct gendisk *gendisk = dm_disk(dm_table_get_md(rs->ti->table)); + + set_capacity(gendisk, rs->md.array_sectors); revalidate_disk(gendisk); } @@ -1674,8 +1678,11 @@ static void do_table_event(struct work_s struct raid_set *rs = container_of(ws, struct raid_set, md.event_work); smp_rmb(); /* Make sure we access most actual mddev properties */ - if (!rs_is_reshaping(rs)) + if (!rs_is_reshaping(rs)) { + if (rs_is_raid10(rs)) + rs_set_rdev_sectors(rs); rs_set_capacity(rs); + } dm_table_event(rs->ti->table); } @@ -3842,11 +3849,10 @@ static int raid_preresume(struct dm_targ mddev->resync_min = mddev->recovery_cp; } - rs_set_capacity(rs); - /* Check for any reshape request unless new raid set */ if (test_and_clear_bit(RT_FLAG_RESHAPE_RS, &rs->runtime_flags)) { /* Initiate a reshape. */ + rs_set_rdev_sectors(rs); mddev_lock_nointr(mddev); r = rs_start_reshape(rs); mddev_unlock(mddev); @@ -3875,6 +3881,10 @@ static void raid_resume(struct dm_target mddev->ro = 0; mddev->in_sync = 0; + /* Only reduce raid set size before running a disk removing reshape. */ + if (mddev->delta_disks < 0) + rs_set_capacity(rs); + /* * Keep the RAID set frozen if reshape/rebuild flags are set. * The RAID set is unfrozen once the next table load/resume, Patches currently in stable-queue which might be from heinzm(a)redhat.com are queue-4.15/dm-raid-fix-raid-set-size-revalidation.patch

7 years, 9 months

1
0
0 0

Patch "crypto: keywrap - Add missing ULL suffixes for 64-bit constants" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: keywrap - Add missing ULL suffixes for 64-bit constants to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-keywrap-add-missing-ull-suffixes-for-64-bit-constants.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Geert Uytterhoeven <geert(a)linux-m68k.org> Date: Wed, 15 Nov 2017 11:44:28 +0100 Subject: crypto: keywrap - Add missing ULL suffixes for 64-bit constants From: Geert Uytterhoeven <geert(a)linux-m68k.org> [ Upstream commit c9683276dd89906ca9b65696d09104d542171421 ] On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): crypto/keywrap.c: In function ‘crypto_kw_decrypt’: crypto/keywrap.c:191: warning: integer constant is too large for ‘long’ type crypto/keywrap.c: In function ‘crypto_kw_encrypt’: crypto/keywrap.c:224: warning: integer constant is too large for ‘long’ type Fixes: 9e49451d7a15365d ("crypto: keywrap - simplify code") Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> Reviewed-by: Stephan Mueller <smueller(a)chronox.de> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- crypto/keywrap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/crypto/keywrap.c +++ b/crypto/keywrap.c @@ -188,7 +188,7 @@ static int crypto_kw_decrypt(struct blkc } /* Perform authentication check */ - if (block.A != cpu_to_be64(0xa6a6a6a6a6a6a6a6)) + if (block.A != cpu_to_be64(0xa6a6a6a6a6a6a6a6ULL)) ret = -EBADMSG; memzero_explicit(&block, sizeof(struct crypto_kw_block)); @@ -221,7 +221,7 @@ static int crypto_kw_encrypt(struct blkc * Place the predefined IV into block A -- for encrypt, the caller * does not need to provide an IV, but he needs to fetch the final IV. */ - block.A = cpu_to_be64(0xa6a6a6a6a6a6a6a6); + block.A = cpu_to_be64(0xa6a6a6a6a6a6a6a6ULL); /* * src scatterlist is read-only. dst scatterlist is r/w. During the Patches currently in stable-queue which might be from geert(a)linux-m68k.org are queue-4.15/crypto-keywrap-add-missing-ull-suffixes-for-64-bit-constants.patch

7 years, 9 months

1
0
0 0

Patch "crypto: ecc - Fix NULL pointer deref. on no default_rng" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: ecc - Fix NULL pointer deref. on no default_rng to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-ecc-fix-null-pointer-deref.-on-no-default_rng.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Pierre <pinaraf(a)pinaraf.info> Date: Sun, 12 Nov 2017 15:24:32 +0100 Subject: crypto: ecc - Fix NULL pointer deref. on no default_rng From: Pierre <pinaraf(a)pinaraf.info> [ Upstream commit 4c0e22c90510308433272d7ba281b1eb4eda8209 ] If crypto_get_default_rng returns an error, the function ecc_gen_privkey should return an error. Instead, it currently tries to use the default_rng nevertheless, thus creating a kernel panic with a NULL pointer dereference. Returning the error directly, as was supposedly intended when looking at the code, fixes this. Signed-off-by: Pierre Ducroquet <pinaraf(a)pinaraf.info> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar(a)gmail.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- crypto/ecc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/crypto/ecc.c +++ b/crypto/ecc.c @@ -964,7 +964,7 @@ int ecc_gen_privkey(unsigned int curve_i * DRBG with a security strength of 256. */ if (crypto_get_default_rng()) - err = -EFAULT; + return -EFAULT; err = crypto_rng_get_bytes(crypto_default_rng, (u8 *)priv, nbytes); crypto_put_default_rng(); Patches currently in stable-queue which might be from pinaraf(a)pinaraf.info are queue-4.15/crypto-ecc-fix-null-pointer-deref.-on-no-default_rng.patch

7 years, 9 months

1
0
0 0

Patch "crypto: chelsio - Fix an error code in chcr_hash_dma_map()" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: chelsio - Fix an error code in chcr_hash_dma_map() to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-chelsio-fix-an-error-code-in-chcr_hash_dma_map.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Fri, 10 Nov 2017 00:25:43 +0300 Subject: crypto: chelsio - Fix an error code in chcr_hash_dma_map() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 7814f552ff826fefa5e1b24083c7a06a9378e9ef ] The dma_map_sg() function returns zero on error and positive values on success. We want to return -ENOMEM on failure here and zero on success. Fixes: 2f47d5804311 ("crypto: chelsio - Move DMA un/mapping to chcr from lld cxgb4 driver") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/crypto/chelsio/chcr_algo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/crypto/chelsio/chcr_algo.c +++ b/drivers/crypto/chelsio/chcr_algo.c @@ -2414,7 +2414,7 @@ static inline int chcr_hash_dma_map(stru error = dma_map_sg(dev, req->src, sg_nents(req->src), DMA_TO_DEVICE); if (!error) - return error; + return -ENOMEM; req_ctx->is_sg_map = 1; return 0; } Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.15/media-cpia2-fix-a-couple-off-by-one-bugs.patch queue-4.15/crypto-chelsio-fix-an-error-code-in-chcr_hash_dma_map.patch queue-4.15/drm-panel-rpi-touchscreen-propagate-errors-in-rpi_touchscreen_i2c_read.patch queue-4.15/bnxt_en-uninitialized-variable-in-bnxt_tc_parse_actions.patch queue-4.15/power-supply-sbs-message-double-left-shift-bug-in-sbsm_select.patch queue-4.15/asoc-nuc900-fix-a-loop-timeout-test.patch

7 years, 9 months

1
0
0 0

Patch "crypto: cavium - fix memory leak on info" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: cavium - fix memory leak on info to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-cavium-fix-memory-leak-on-info.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Colin Ian King <colin.king(a)canonical.com> Date: Wed, 15 Nov 2017 12:37:19 +0000 Subject: crypto: cavium - fix memory leak on info From: Colin Ian King <colin.king(a)canonical.com> [ Upstream commit 87aae50af730a28dc1d8846d86dca5e9aa724a9f ] The object info is being leaked on an error return path, fix this by setting ret to -ENOMEM and exiting via the request_cleanup path that will free info. Detected by CoverityScan, CID#1408439 ("Resource Leak") Fixes: c694b233295b ("crypto: cavium - Add the Virtual Function driver for CPT") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/crypto/cavium/cpt/cptvf_reqmanager.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/crypto/cavium/cpt/cptvf_reqmanager.c +++ b/drivers/crypto/cavium/cpt/cptvf_reqmanager.c @@ -459,7 +459,8 @@ int process_request(struct cpt_vf *cptvf info->completion_addr = kzalloc(sizeof(union cpt_res_s), GFP_KERNEL); if (unlikely(!info->completion_addr)) { dev_err(&pdev->dev, "Unable to allocate memory for completion_addr\n"); - return -ENOMEM; + ret = -ENOMEM; + goto request_cleanup; } result = (union cpt_res_s *)info->completion_addr; Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.15/usbip-vudc-fix-null-pointer-dereference-on-udc-lock.patch queue-4.15/crypto-cavium-fix-memory-leak-on-info.patch queue-4.15/staging-rtl8822be-fix-missing-null-check-on-dev_alloc_skb-return.patch

7 years, 9 months

1
0
0 0

Patch "crypto: caam/qi - use correct print specifier for size_t" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: caam/qi - use correct print specifier for size_t to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-caam-qi-use-correct-print-specifier-for-size_t.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: "Horia Geantă" <horia.geanta(a)nxp.com> Date: Tue, 28 Nov 2017 18:48:08 +0200 Subject: crypto: caam/qi - use correct print specifier for size_t From: "Horia Geantă" <horia.geanta(a)nxp.com> [ Upstream commit 9db09e3bad65393dc23b0279beb7f3754d77065c ] Fix below warnings on ARMv7 by using %zu for printing size_t values: drivers/crypto/caam/caamalg_qi.c: In function aead_edesc_alloc: drivers/crypto/caam/caamalg_qi.c:417:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=] sizeof(struct qm_sg_entry)) ^ drivers/crypto/caam/caamalg_qi.c:672:16: note: in expansion of macro CAAM_QI_MAX_AEAD_SG qm_sg_ents, CAAM_QI_MAX_AEAD_SG); ^ drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_edesc_alloc: drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=] sizeof(struct qm_sg_entry)) ^ drivers/crypto/caam/caamalg_qi.c:909:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG); ^ drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_giv_edesc_alloc: drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=] sizeof(struct qm_sg_entry)) ^ drivers/crypto/caam/caamalg_qi.c:1062:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG); ^ Fixes: eb9ba37dc15a ("crypto: caam/qi - handle large number of S/Gs case") Signed-off-by: Horia Geantă <horia.geanta(a)nxp.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/crypto/caam/caamalg_qi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/crypto/caam/caamalg_qi.c +++ b/drivers/crypto/caam/caamalg_qi.c @@ -668,7 +668,7 @@ static struct aead_edesc *aead_edesc_all qm_sg_ents = 1 + !!ivsize + mapped_src_nents + (mapped_dst_nents > 1 ? mapped_dst_nents : 0); if (unlikely(qm_sg_ents > CAAM_QI_MAX_AEAD_SG)) { - dev_err(qidev, "Insufficient S/G entries: %d > %lu\n", + dev_err(qidev, "Insufficient S/G entries: %d > %zu\n", qm_sg_ents, CAAM_QI_MAX_AEAD_SG); caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents, iv_dma, ivsize, op_type, 0, 0); @@ -905,7 +905,7 @@ static struct ablkcipher_edesc *ablkciph qm_sg_ents += mapped_dst_nents > 1 ? mapped_dst_nents : 0; if (unlikely(qm_sg_ents > CAAM_QI_MAX_ABLKCIPHER_SG)) { - dev_err(qidev, "Insufficient S/G entries: %d > %lu\n", + dev_err(qidev, "Insufficient S/G entries: %d > %zu\n", qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG); caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents, iv_dma, ivsize, op_type, 0, 0); @@ -1058,7 +1058,7 @@ static struct ablkcipher_edesc *ablkciph } if (unlikely(qm_sg_ents > CAAM_QI_MAX_ABLKCIPHER_SG)) { - dev_err(qidev, "Insufficient S/G entries: %d > %lu\n", + dev_err(qidev, "Insufficient S/G entries: %d > %zu\n", qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG); caam_unmap(qidev, req->src, req->dst, src_nents, dst_nents, iv_dma, ivsize, GIVENCRYPT, 0, 0); Patches currently in stable-queue which might be from horia.geanta(a)nxp.com are queue-4.15/crypto-caam-qi-use-correct-print-specifier-for-size_t.patch

7 years, 9 months

1
0
0 0

Patch "cpufreq: Fix governor module removal race" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cpufreq: Fix governor module removal race to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cpufreq-fix-governor-module-removal-race.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: "Rafael J. Wysocki" <rafael.j.wysocki(a)intel.com> Date: Thu, 23 Nov 2017 14:27:07 +0100 Subject: cpufreq: Fix governor module removal race From: "Rafael J. Wysocki" <rafael.j.wysocki(a)intel.com> [ Upstream commit a8b149d32b663c1a4105273295184b78f53d33cf ] It is possible to remove a cpufreq governor module after cpufreq_parse_governor() has returned success in store_scaling_governor() and before cpufreq_set_policy() acquires a reference to it, because the governor list is not protected during that period and nothing prevents the governor from being unregistered then. Prevent that from happening by acquiring an extra reference to the governor module temporarily in cpufreq_parse_governor(), under cpufreq_governor_mutex, and dropping it in store_scaling_governor(), when cpufreq_set_policy() returns. Note that the second cpufreq_parse_governor() call site is fine, because it only cares about the policy member of new_policy. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Acked-by: Viresh Kumar <viresh.kumar(a)linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/cpufreq/cpufreq.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -637,6 +637,8 @@ static int cpufreq_parse_governor(char * *governor = t; err = 0; } + if (t && !try_module_get(t->owner)) + t = NULL; mutex_unlock(&cpufreq_governor_mutex); } @@ -765,6 +767,10 @@ static ssize_t store_scaling_governor(st return -EINVAL; ret = cpufreq_set_policy(policy, &new_policy); + + if (new_policy.governor) + module_put(new_policy.governor->owner); + return ret ? ret : count; } Patches currently in stable-queue which might be from rafael.j.wysocki(a)intel.com are queue-4.15/cpufreq-fix-governor-module-removal-race.patch

7 years, 9 months

1
0
0 0

Patch "clk: ti: clkctrl: add support for retrying failed init" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: ti: clkctrl: add support for retrying failed init to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-ti-clkctrl-add-support-for-retrying-failed-init.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Tero Kristo <t-kristo(a)ti.com> Date: Thu, 12 Oct 2017 10:55:29 +0300 Subject: clk: ti: clkctrl: add support for retrying failed init From: Tero Kristo <t-kristo(a)ti.com> [ Upstream commit 729e13bf58e643b9accd2a14c55b555958702fb0 ] In case the clkctrl node contains assigned-clock-* entries, registering the provider can fail with -EPROBE_DEFER. In this case, add the provider to the retry_init clock list so it will be cleaned up later. Signed-off-by: Tero Kristo <t-kristo(a)ti.com> Acked-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/ti/clkctrl.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) --- a/drivers/clk/ti/clkctrl.c +++ b/drivers/clk/ti/clkctrl.c @@ -400,6 +400,12 @@ _ti_clkctrl_setup_subclks(struct omap_cl } } +static void __init _clkctrl_add_provider(void *data, + struct device_node *np) +{ + of_clk_add_hw_provider(np, _ti_omap4_clkctrl_xlate, data); +} + static void __init _ti_omap4_clkctrl_setup(struct device_node *node) { struct omap_clkctrl_provider *provider; @@ -411,6 +417,7 @@ static void __init _ti_omap4_clkctrl_set struct omap_clkctrl_clk *clkctrl_clk; const __be32 *addrp; u32 addr; + int ret; addrp = of_get_address(node, 0, NULL, NULL); addr = (u32)of_translate_address(node, addrp); @@ -485,7 +492,10 @@ static void __init _ti_omap4_clkctrl_set reg_data++; } - of_clk_add_hw_provider(node, _ti_omap4_clkctrl_xlate, provider); + ret = of_clk_add_hw_provider(node, _ti_omap4_clkctrl_xlate, provider); + if (ret == -EPROBE_DEFER) + ti_clk_retry_init(node, provider, _clkctrl_add_provider); + return; cleanup: Patches currently in stable-queue which might be from t-kristo(a)ti.com are queue-4.15/clk-ti-clkctrl-add-support-for-retrying-failed-init.patch

7 years, 9 months

1
0
0 0

Patch "clk: renesas: r8a77970: Add LVDS clock" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: renesas: r8a77970: Add LVDS clock to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-renesas-r8a77970-add-lvds-clock.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Sergei Shtylyov <sergei.shtylyov(a)cogentembedded.com> Date: Wed, 6 Dec 2017 00:43:35 +0300 Subject: clk: renesas: r8a77970: Add LVDS clock From: Sergei Shtylyov <sergei.shtylyov(a)cogentembedded.com> [ Upstream commit 64082568dd1e05d349a0d9dfda2bdf6ace3f9f6c ] I seem to have omitted the LVDS clock from the R8A77970 CPG/MSSR support patch for some reason -- add it back... Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns(a)hitachi.com>. Fixes: 8d46e28fb5081b49 ("clk: renesas: cpg-mssr: Add R8A77970 support") Signed-off-by: Vladimir Barinov <vladimir.barinov(a)cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov(a)cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/renesas/r8a77970-cpg-mssr.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/clk/renesas/r8a77970-cpg-mssr.c +++ b/drivers/clk/renesas/r8a77970-cpg-mssr.c @@ -105,6 +105,7 @@ static const struct mssr_mod_clk r8a7797 DEF_MOD("vspd0", 623, R8A77970_CLK_S2D1), DEF_MOD("csi40", 716, R8A77970_CLK_CSI0), DEF_MOD("du0", 724, R8A77970_CLK_S2D1), + DEF_MOD("lvds", 727, R8A77970_CLK_S2D1), DEF_MOD("vin3", 808, R8A77970_CLK_S2D1), DEF_MOD("vin2", 809, R8A77970_CLK_S2D1), DEF_MOD("vin1", 810, R8A77970_CLK_S2D1), Patches currently in stable-queue which might be from sergei.shtylyov(a)cogentembedded.com are queue-4.15/clk-renesas-r8a77970-add-lvds-clock.patch

7 years, 9 months

1
0
0 0

Patch "clk: qcom: msm8916: fix mnd_width for codec_digcodec" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: qcom: msm8916: fix mnd_width for codec_digcodec to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-qcom-msm8916-fix-mnd_width-for-codec_digcodec.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Date: Wed, 6 Dec 2017 12:11:38 +0000 Subject: clk: qcom: msm8916: fix mnd_width for codec_digcodec From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> [ Upstream commit d8e488e8242ecf129eebc440c92d800a99ca109d ] This patch fixes missing mnd_width for codec_digital clk, this is now set to 8 inline with datasheet. Fixes: 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/qcom/gcc-msm8916.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/clk/qcom/gcc-msm8916.c +++ b/drivers/clk/qcom/gcc-msm8916.c @@ -1438,6 +1438,7 @@ static const struct freq_tbl ftbl_codec_ static struct clk_rcg2 codec_digcodec_clk_src = { .cmd_rcgr = 0x1c09c, + .mnd_width = 8, .hid_width = 5, .parent_map = gcc_xo_gpll1_emclk_sleep_map, .freq_tbl = ftbl_codec_clk, Patches currently in stable-queue which might be from srinivas.kandagatla(a)linaro.org are queue-4.15/clk-qcom-msm8916-fix-mnd_width-for-codec_digcodec.patch

7 years, 9 months

1
0
0 0

Patch "clk: meson: gxbb: fix wrong clock for SARADC/SANA" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: meson: gxbb: fix wrong clock for SARADC/SANA to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-meson-gxbb-fix-wrong-clock-for-saradc-sana.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Yixun Lan <yixun.lan(a)amlogic.com> Date: Tue, 7 Nov 2017 22:12:23 +0800 Subject: clk: meson: gxbb: fix wrong clock for SARADC/SANA From: Yixun Lan <yixun.lan(a)amlogic.com> [ Upstream commit 75eccf5ed83250c0aeaeeb76f7288254ac0a87b4 ] According to the datasheet, in Meson-GXBB/GXL series, The clock gate bit for SARADC is HHI_GCLK_MPEG2 bit[22], while clock gate bit for SANA is HHI_GCLK_MPEG0 bit[10]. Test passed at gxl-s905x-p212 board. The following published datasheets are wrong and should be updated [1] GXBB v1.1.4 [2] GXL v0.3_20170314 Fixes: 738f66d3211d ("clk: gxbb: add AmLogic GXBB clk controller driver") Tested-by: Xingyu Chen <xingyu.chen(a)amlogic.com> Signed-off-by: Yixun Lan <yixun.lan(a)amlogic.com> Signed-off-by: Jerome Brunet <jbrunet(a)baylibre.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/meson/gxbb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -1386,7 +1386,7 @@ static MESON_GATE(gxbb_pl301, HHI_GCLK_M static MESON_GATE(gxbb_periphs, HHI_GCLK_MPEG0, 7); static MESON_GATE(gxbb_spicc, HHI_GCLK_MPEG0, 8); static MESON_GATE(gxbb_i2c, HHI_GCLK_MPEG0, 9); -static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG0, 10); +static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG0, 10); static MESON_GATE(gxbb_smart_card, HHI_GCLK_MPEG0, 11); static MESON_GATE(gxbb_rng0, HHI_GCLK_MPEG0, 12); static MESON_GATE(gxbb_uart0, HHI_GCLK_MPEG0, 13); @@ -1437,7 +1437,7 @@ static MESON_GATE(gxbb_usb0_ddr_bridge, static MESON_GATE(gxbb_mmc_pclk, HHI_GCLK_MPEG2, 11); static MESON_GATE(gxbb_dvin, HHI_GCLK_MPEG2, 12); static MESON_GATE(gxbb_uart2, HHI_GCLK_MPEG2, 15); -static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG2, 22); +static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG2, 22); static MESON_GATE(gxbb_vpu_intr, HHI_GCLK_MPEG2, 25); static MESON_GATE(gxbb_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26); static MESON_GATE(gxbb_clk81_a53, HHI_GCLK_MPEG2, 29); Patches currently in stable-queue which might be from yixun.lan(a)amlogic.com are queue-4.15/clk-meson-gxbb-fix-wrong-clock-for-saradc-sana.patch

7 years, 9 months

1
0
0 0

Patch "bpf: fix stack state printing in verifier log" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bpf: fix stack state printing in verifier log to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bpf-fix-stack-state-printing-in-verifier-log.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Alexei Starovoitov <ast(a)fb.com> Date: Thu, 30 Nov 2017 21:31:35 -0800 Subject: bpf: fix stack state printing in verifier log From: Alexei Starovoitov <ast(a)fb.com> [ Upstream commit 12a3cc8424fe1237aaeb982dec4f0914ddd22f3e ] fix incorrect stack state prints in print_verifier_state() Fixes: 638f5b90d460 ("bpf: reduce verifier memory consumption") Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Acked-by: John Fastabend <john.fastabend(a)gmail.com> Acked-by: Daniel Borkmann <daniel(a)iogearbox.net> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/bpf/verifier.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -279,7 +279,7 @@ static void print_verifier_state(struct for (i = 0; i < state->allocated_stack / BPF_REG_SIZE; i++) { if (state->stack[i].slot_type[0] == STACK_SPILL) verbose(env, " fp%d=%s", - -MAX_BPF_STACK + i * BPF_REG_SIZE, + (-i - 1) * BPF_REG_SIZE, reg_type_str[state->stack[i].spilled_ptr.type]); } verbose(env, "\n"); Patches currently in stable-queue which might be from ast(a)fb.com are queue-4.15/bpf-fix-stack-state-printing-in-verifier-log.patch

7 years, 9 months

1
0
0 0

Patch "bnxt_en: Uninitialized variable in bnxt_tc_parse_actions()" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnxt_en: Uninitialized variable in bnxt_tc_parse_actions() to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnxt_en-uninitialized-variable-in-bnxt_tc_parse_actions.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Tue, 5 Dec 2017 17:37:52 +0300 Subject: bnxt_en: Uninitialized variable in bnxt_tc_parse_actions() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 92425c40676d498efccae6fecdb8f8e4dcf7e4a4 ] Smatch warns that: drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c:160 bnxt_tc_parse_actions() error: uninitialized symbol 'rc'. "rc" is either uninitialized or set to zero here so we can just remove the check. Fixes: 8c95f773b4a3 ("bnxt_en: add support for Flower based vxlan encap/decap offload") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Acked-by: Michael Chan <michael.chan(a)broadcom.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c @@ -148,9 +148,6 @@ static int bnxt_tc_parse_actions(struct } } - if (rc) - return rc; - if (actions->flags & BNXT_TC_ACTION_FLAG_FWD) { if (actions->flags & BNXT_TC_ACTION_FLAG_TUNNEL_ENCAP) { /* dst_fid is PF's fid */ @@ -164,7 +161,7 @@ static int bnxt_tc_parse_actions(struct } } - return rc; + return 0; } #define GET_KEY(flow_cmd, key_type) \ Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.15/media-cpia2-fix-a-couple-off-by-one-bugs.patch queue-4.15/crypto-chelsio-fix-an-error-code-in-chcr_hash_dma_map.patch queue-4.15/drm-panel-rpi-touchscreen-propagate-errors-in-rpi_touchscreen_i2c_read.patch queue-4.15/bnxt_en-uninitialized-variable-in-bnxt_tc_parse_actions.patch queue-4.15/power-supply-sbs-message-double-left-shift-bug-in-sbsm_select.patch queue-4.15/asoc-nuc900-fix-a-loop-timeout-test.patch

7 years, 9 months

1
0
0 0

Patch "bnxt_en: Don't print "Link speed -1 no longer supported" messages." has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnxt_en: Don't print "Link speed -1 no longer supported" messages. to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnxt_en-don-t-print-link-speed-1-no-longer-supported-messages.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Michael Chan <michael.chan(a)broadcom.com> Date: Wed, 6 Dec 2017 17:31:22 -0500 Subject: bnxt_en: Don't print "Link speed -1 no longer supported" messages. From: Michael Chan <michael.chan(a)broadcom.com> [ Upstream commit a8168b6cee6e9334dfebb4b9108e8d73794f6088 ] On some dual port NICs, the 2 ports have to be configured with compatible link speeds. Under some conditions, a port's configured speed may no longer be supported. The firmware will send a message to the driver when this happens. Improve this logic that prints out the warning by only printing it if we can determine the link speed that is no longer supported. If the speed is unknown or it is in autoneg mode, skip the warning message. Reported-by: Thomas Bogendoerfer <tbogendoerfer(a)suse.de> Signed-off-by: Michael Chan <michael.chan(a)broadcom.com> Tested-by: Thomas Bogendoerfer <tbogendoerfer(a)suse.de> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1706,12 +1706,16 @@ static int bnxt_async_event_process(stru if (BNXT_VF(bp)) goto async_event_process_exit; - if (data1 & 0x20000) { + + /* print unsupported speed warning in forced speed mode only */ + if (!(link_info->autoneg & BNXT_AUTONEG_SPEED) && + (data1 & 0x20000)) { u16 fw_speed = link_info->force_link_speed; u32 speed = bnxt_fw_to_ethtool_speed(fw_speed); - netdev_warn(bp->dev, "Link speed %d no longer supported\n", - speed); + if (speed != SPEED_UNKNOWN) + netdev_warn(bp->dev, "Link speed %d no longer supported\n", + speed); } set_bit(BNXT_LINK_SPEED_CHNG_SP_EVENT, &bp->sp_event); /* fall thru */ Patches currently in stable-queue which might be from michael.chan(a)broadcom.com are queue-4.15/bnxt_en-don-t-print-link-speed-1-no-longer-supported-messages.patch queue-4.15/bnxt_en-uninitialized-variable-in-bnxt_tc_parse_actions.patch

7 years, 9 months

1
0
0 0

Patch "ath10k: update tdls teardown state to target" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: update tdls teardown state to target to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-update-tdls-teardown-state-to-target.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Manikanta Pubbisetty <mpubbise(a)qti.qualcomm.com> Date: Mon, 6 Nov 2017 13:39:31 +0530 Subject: ath10k: update tdls teardown state to target From: Manikanta Pubbisetty <mpubbise(a)qti.qualcomm.com> [ Upstream commit 424ea0d174e82365f85c6770225dba098b8f1d5f ] It is required to update the teardown state of the peer when a tdls link with that peer is terminated. This information is useful for the target to perform some cleanups wrt the tdls peer. Without proper cleanup, target assumes that the peer is connected and blocks future connection requests, updating the teardown state of the peer addresses the problem. Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version. Signed-off-by: Manikanta Pubbisetty <mpubbise(a)qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/mac.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -6201,6 +6201,16 @@ static int ath10k_sta_state(struct ieee8 "mac vdev %d peer delete %pM sta %pK (sta gone)\n", arvif->vdev_id, sta->addr, sta); + if (sta->tdls) { + ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, + sta, + WMI_TDLS_PEER_STATE_TEARDOWN); + if (ret) + ath10k_warn(ar, "failed to update tdls peer state for %pM state %d: %i\n", + sta->addr, + WMI_TDLS_PEER_STATE_TEARDOWN, ret); + } + ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); if (ret) ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n", Patches currently in stable-queue which might be from mpubbise(a)qti.qualcomm.com are queue-4.15/ath10k-update-tdls-teardown-state-to-target.patch

7 years, 9 months

1
0
0 0

Patch "ath10k: fix invalid STS_CAP_OFFSET_MASK" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: fix invalid STS_CAP_OFFSET_MASK to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-fix-invalid-sts_cap_offset_mask.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Ben Greear <greearb(a)candelatech.com> Date: Sat, 2 Dec 2017 16:50:49 +0200 Subject: ath10k: fix invalid STS_CAP_OFFSET_MASK From: Ben Greear <greearb(a)candelatech.com> [ Upstream commit 8cec57f5277ef0e354e37a0bf909dc71bc1f865b ] The 10.4 firmware defines this as a 3-bit field, as does the mac80211 stack. The 4th bit is defined as CONF_IMPLICIT_BF at least in the firmware header I have seen. This patch fixes the ath10k wmi header to match the firmware. Signed-off-by: Ben Greear <greearb(a)candelatech.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/wmi.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -5236,7 +5236,8 @@ enum wmi_10_4_vdev_param { #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 -#define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0 +#define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 +#define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 Patches currently in stable-queue which might be from greearb(a)candelatech.com are queue-4.15/ath10k-fix-invalid-sts_cap_offset_mask.patch

7 years, 9 months

1
0
0 0

Patch "ASoC: nuc900: Fix a loop timeout test" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: nuc900: Fix a loop timeout test to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-nuc900-fix-a-loop-timeout-test.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Sat, 9 Dec 2017 14:52:28 +0300 Subject: ASoC: nuc900: Fix a loop timeout test From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 65a12b3aafed5fc59f4ce41b22b752b1729e6701 ] We should be finishing the loop with timeout set to zero but because this is a post-op we finish with timeout == -1. Fixes: 1082e2703a2d ("ASoC: NUC900/audio: add nuc900 audio driver support") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/nuc900/nuc900-ac97.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/sound/soc/nuc900/nuc900-ac97.c +++ b/sound/soc/nuc900/nuc900-ac97.c @@ -67,7 +67,7 @@ static unsigned short nuc900_ac97_read(s /* polling the AC_R_FINISH */ while (!(AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_R_FINISH) - && timeout--) + && --timeout) mdelay(1); if (!timeout) { @@ -121,7 +121,7 @@ static void nuc900_ac97_write(struct snd /* polling the AC_W_FINISH */ while ((AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_W_FINISH) - && timeout--) + && --timeout) mdelay(1); if (!timeout) Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.15/media-cpia2-fix-a-couple-off-by-one-bugs.patch queue-4.15/crypto-chelsio-fix-an-error-code-in-chcr_hash_dma_map.patch queue-4.15/drm-panel-rpi-touchscreen-propagate-errors-in-rpi_touchscreen_i2c_read.patch queue-4.15/bnxt_en-uninitialized-variable-in-bnxt_tc_parse_actions.patch queue-4.15/power-supply-sbs-message-double-left-shift-bug-in-sbsm_select.patch queue-4.15/asoc-nuc900-fix-a-loop-timeout-test.patch

7 years, 9 months

1
0
0 0

Patch "arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm64-dts-renesas-salvator-common-add-ethernetavb-phy-reset.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Mon, 4 Dec 2017 11:34:51 +0100 Subject: arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit f5bbcd533a9d1af97b8a0862a421bb8455f1bf6d ] Describe the GPIO used to reset the Ethernet PHY for EthernetAVB. This allows the driver to reset the PHY during probe and after system resume. This fixes Ethernet operation after resume from s2ram on Salvator-XS, where the enable pin of the regulator providing PHY power is connected to PRESETn, and PSCI powers down the SoC during system suspend. On Salvator-X, the enable pin is always pulled high, but the driver may still need to reset the PHY if this wasn't done by the bootloader before. Inspired by patches in the BSP for the individual Salvator-X/XS boards by Kazuya Mizuguchi. Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Simon Horman <horms+renesas(a)verge.net.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 1 + 1 file changed, 1 insertion(+) --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -263,6 +263,7 @@ reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; }; }; Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-4.15/clk-renesas-r8a77970-add-lvds-clock.patch queue-4.15/serial-sh-sci-prevent-lockup-on-full-tty-buffers.patch queue-4.15/pinctrl-sh-pfc-r8a7795-es1-fix-mod_sel1-bit-to-0x3-when-using-stp_isen_1_d.patch queue-4.15/arm64-dts-renesas-salvator-common-add-ethernetavb-phy-reset.patch queue-4.15/pinctrl-sh-pfc-r8a7791-add-can_clk-function.patch

7 years, 9 months

1
0
0 0

Patch "ARM: dts: omap3-n900: Fix the audio CODEC's reset pin" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: omap3-n900: Fix the audio CODEC's reset pin to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-omap3-n900-fix-the-audio-codec-s-reset-pin.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: "Andrew F. Davis" <afd(a)ti.com> Date: Wed, 29 Nov 2017 11:13:59 -0600 Subject: ARM: dts: omap3-n900: Fix the audio CODEC's reset pin From: "Andrew F. Davis" <afd(a)ti.com> [ Upstream commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 ] The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here. Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X support") Signed-off-by: Andrew F. Davis <afd(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/omap3-n900.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -558,7 +558,7 @@ tlv320aic3x: tlv320aic3x@18 { compatible = "ti,tlv320aic3x"; reg = <0x18>; - gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ ai3x-gpio-func = < 0 /* AIC3X_GPIO1_FUNC_DISABLED */ 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ @@ -575,7 +575,7 @@ tlv320aic3x_aux: tlv320aic3x@19 { compatible = "ti,tlv320aic3x"; reg = <0x19>; - gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ AVDD-supply = <&vmmc2>; DRVDD-supply = <&vmmc2>; Patches currently in stable-queue which might be from afd(a)ti.com are queue-4.15/arm-dts-omap3-n900-fix-the-audio-codec-s-reset-pin.patch queue-4.15/arm-dts-am335x-pepper-fix-the-audio-codec-s-reset-pin.patch

7 years, 9 months

1
0
0 0

Patch "ARM: dts: koelsch: Move cec_clock to root node" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: koelsch: Move cec_clock to root node to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-koelsch-move-cec_clock-to-root-node.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Simon Horman <horms+renesas(a)verge.net.au> Date: Thu, 2 Nov 2017 10:18:05 +0100 Subject: ARM: dts: koelsch: Move cec_clock to root node From: Simon Horman <horms+renesas(a)verge.net.au> [ Upstream commit d72f4f03854d1225c72d682bf0e01377e7016419 ] cec-clock is a fixed clock generator that is not controlled by i2c5 and thus should not be a child of the i2c5 bus node. Rather, it should be a child of the root node of the DT. Fixes: 02a5ab18d366 ("ARM: dts: koelsch: Add CEC clock for HDMI transmitter") Reported-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas(a)verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/r8a7791-koelsch.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -278,6 +278,12 @@ }; }; + cec_clock: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -640,12 +646,6 @@ }; }; - cec_clock: cec-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; Patches currently in stable-queue which might be from horms+renesas(a)verge.net.au are queue-4.15/arm64-dts-renesas-salvator-common-add-ethernetavb-phy-reset.patch queue-4.15/usb-host-xhci-rcar-add-support-for-r8a77965.patch queue-4.15/arm-dts-koelsch-move-cec_clock-to-root-node.patch

7 years, 9 months

1
0
0 0

Patch "ARM: dts: exynos: Correct Trats2 panel reset line" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: exynos: Correct Trats2 panel reset line to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-exynos-correct-trats2-panel-reset-line.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Simon Shields <simon(a)lineageos.org> Date: Tue, 21 Nov 2017 22:24:24 +1100 Subject: ARM: dts: exynos: Correct Trats2 panel reset line From: Simon Shields <simon(a)lineageos.org> [ Upstream commit 1b377924841df1e13ab5b225be3a83f807a92b52 ] Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used on early revisions of the board. Fixes: 420ae8451a22 ("ARM: dts: exynos4412-trats2: add panel node") Signed-off-by: Simon Shields <simon(a)lineageos.org> Acked-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Tested-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/exynos4412-trats2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -454,7 +454,7 @@ reg = <0>; vdd3-supply = <&lcd_vdd3_reg>; vci-supply = <&ldo25_reg>; - reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; Patches currently in stable-queue which might be from simon(a)lineageos.org are queue-4.15/arm-dts-exynos-correct-trats2-panel-reset-line.patch

7 years, 9 months

1
0
0 0

Patch "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-am335x-pepper-fix-the-audio-codec-s-reset-pin.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: "Andrew F. Davis" <afd(a)ti.com> Date: Wed, 29 Nov 2017 11:13:56 -0600 Subject: ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin From: "Andrew F. Davis" <afd(a)ti.com> [ Upstream commit e153db03c6b7a035c797bcdf35262586f003ee93 ] The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here. Fixes: 4341881d0562 ("ARM: dts: Add devicetree for Gumstix Pepper board") Signed-off-by: Andrew F. Davis <afd(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am335x-pepper.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -139,7 +139,7 @@ &audio_codec { status = "okay"; - gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; AVDD-supply = <&ldo3_reg>; IOVDD-supply = <&ldo3_reg>; DRVDD-supply = <&ldo3_reg>; Patches currently in stable-queue which might be from afd(a)ti.com are queue-4.15/arm-dts-omap3-n900-fix-the-audio-codec-s-reset-pin.patch queue-4.15/arm-dts-am335x-pepper-fix-the-audio-codec-s-reset-pin.patch

7 years, 9 months

1
0
0 0

Patch "agp/intel: Flush all chipset writes after updating the GGTT" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled agp/intel: Flush all chipset writes after updating the GGTT to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: agp-intel-flush-all-chipset-writes-after-updating-the-ggtt.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Chris Wilson <chris(a)chris-wilson.co.uk> Date: Fri, 8 Dec 2017 21:46:16 +0000 Subject: agp/intel: Flush all chipset writes after updating the GGTT From: Chris Wilson <chris(a)chris-wilson.co.uk> [ Upstream commit 8516673a996870ea0ceb337ee4f83c33c5ec3111 ] Before accessing the GGTT we must flush the PTE writes and make them visible to the chipset, or else the indirect access may end up in the wrong page. In commit 3497971a71d8 ("agp/intel: Flush chipset writes after updating a single PTE"), we noticed corruption of the uploads for pwrite and for capturing GPU error states, but it was presumed that the explicit calls to intel_gtt_chipset_flush() were sufficient for the execbuffer path. However, we have not been flushing the chipset between the PTE writes and access via the GTT itself. For simplicity, do the flush after any PTE update rather than try and batch the flushes on a just-in-time basis. References: 3497971a71d8 ("agp/intel: Flush chipset writes after updating a single PTE") Signed-off-by: Chris Wilson <chris(a)chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin(a)intel.com> Cc: Mika Kuoppala <mika.kuoppala(a)intel.com> Cc: drm-intel-fixes(a)lists.freedesktop.org Reviewed-by: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171208214616.30147-1-chris@… Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/char/agp/intel-gtt.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -872,6 +872,8 @@ void intel_gtt_insert_sg_entries(struct } } wmb(); + if (intel_private.driver->chipset_flush) + intel_private.driver->chipset_flush(); } EXPORT_SYMBOL(intel_gtt_insert_sg_entries); Patches currently in stable-queue which might be from chris(a)chris-wilson.co.uk are queue-4.15/dma-buf-fence-fix-lock-inversion-within-dma-fence-array.patch queue-4.15/agp-intel-flush-all-chipset-writes-after-updating-the-ggtt.patch

7 years, 9 months

1
0
0 0

Fix gfs2 in 4.15.y

by Andreas Gruenbacher

Hi Greg, Andrew Price has observed that mounting gfs2 filesystems is currently broken in the 4.15.y kernels. The reason is that commit 'gfs2: Fixes to "Implement iomap for block_map"' was cherry-picked from mainline in 4.15.5 without adding a commit that that commit depends on. Could you please fix that by adding the following commit to 4.15.y: e8b43fe0c1 gfs2: Clean up {lookup,fillup}_metapath In addition, could you please add the following commit to 4.15.y as well: 3b5da96e45 gfs2: Fixes to "Implement iomap for block_map" (2) Both commits can be cherry-picked cleanly. Thanks a lot, Andreas

7 years, 9 months

2
1
0 0

Patch "gfs2: Fixes to "Implement iomap for block_map" (2)" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled gfs2: Fixes to "Implement iomap for block_map" (2) to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: gfs2-fixes-to-implement-iomap-for-block_map-2.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 3b5da96e4585a2788da6a07619bda3518d76eb30 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher <agruenba(a)redhat.com> Date: Mon, 5 Mar 2018 06:18:25 -0700 Subject: gfs2: Fixes to "Implement iomap for block_map" (2) From: Andreas Gruenbacher <agruenba(a)redhat.com> commit 3b5da96e4585a2788da6a07619bda3518d76eb30 upstream. It turns out that commit 3229c18c0d6b2 'Fixes to "Implement iomap for block_map"' introduced another bug in gfs2_iomap_begin that can cause gfs2_block_map to set bh->b_size of an actual buffer to 0. This can lead to arbitrary incorrect behavior including crashes or disk corruption. Revert the incorrect part of that commit. Signed-off-by: Andreas Gruenbacher <agruenba(a)redhat.com> Signed-off-by: Bob Peterson <rpeterso(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/gfs2/bmap.c | 3 --- 1 file changed, 3 deletions(-) --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -811,9 +811,6 @@ do_alloc: iomap->length = hole_size(inode, lblock, &mp); else iomap->length = size - pos; - } else { - if (height <= ip->i_height) - iomap->length = hole_size(inode, lblock, &mp); } goto out_release; } Patches currently in stable-queue which might be from agruenba(a)redhat.com are queue-4.15/gfs2-clean-up-lookup-fillup-_metapath.patch queue-4.15/gfs2-fixes-to-implement-iomap-for-block_map-2.patch

7 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror