- Linux-stable-mirror - lists.linaro.org

Patch "bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnxt_en-need-to-unconditionally-shut-down-roce-in-bnxt_shutdown.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Ray Jui <ray.jui(a)broadcom.com> Date: Fri, 1 Dec 2017 03:13:02 -0500 Subject: bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown From: Ray Jui <ray.jui(a)broadcom.com> [ Upstream commit a7f3f939dd7d8398acebecd1ceb2e9e7ffbe91d2 ] The current 'bnxt_shutdown' implementation only invokes 'bnxt_ulp_shutdown' to shut down RoCE in the case when the system is in the path of power off (SYSTEM_POWER_OFF). While this may work in most cases, it does not work in the smart NIC case, when Linux 'reboot' command is initiated from the Linux that runs on the ARM cores of the NIC card. In this particular case, Linux 'reboot' results in a system 'L3' level reset where the entire ARM and associated subsystems are being reset, but at the same time, Nitro core is being kept in sane state (to allow external PCIe connected servers to continue to work). Without properly shutting down RoCE and freeing all associated resources, it results in the ARM core to hang immediately after the 'reboot' By always invoking 'bnxt_ulp_shutdown' in 'bnxt_shutdown', it fixes the above issue Fixes: 0efd2fc65c92 ("bnxt_en: Add a callback to inform RDMA driver during PCI shutdown.") Signed-off-by: Ray Jui <ray.jui(a)broadcom.com> Signed-off-by: Michael Chan <michael.chan(a)broadcom.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8218,8 +8218,9 @@ static void bnxt_shutdown(struct pci_dev if (netif_running(dev)) dev_close(dev); + bnxt_ulp_shutdown(bp); + if (system_state == SYSTEM_POWER_OFF) { - bnxt_ulp_shutdown(bp); bnxt_clear_int_mode(bp); pci_wake_from_d3(pdev, bp->wol); pci_set_power_state(pdev, PCI_D3hot); Patches currently in stable-queue which might be from ray.jui(a)broadcom.com are queue-4.14/bnxt_en-need-to-unconditionally-shut-down-roce-in-bnxt_shutdown.patch

7 years, 10 months

1
0
0 0

Patch "ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-rsnd-ssi-fix-race-condition-in-rsnd_ssi_pointer_update.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Jiada Wang <jiada_wang(a)mentor.com> Date: Thu, 7 Dec 2017 22:15:38 -0800 Subject: ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update From: Jiada Wang <jiada_wang(a)mentor.com> [ Upstream commit 33f801366bdf3f8b67dfe325b84f4051a090d01e ] Currently there is race condition between set of byte_pos and wrap it around when new buffer starts. If .pointer is called in-between it will result in inconsistent pointer position be returned from .pointer callback. This patch increments buffer pointer atomically to avoid this issue. Signed-off-by: Jiada Wang <jiada_wang(a)mentor.com> Reviewed-by: Takashi Sakamoto <takashi.sakamoto(a)miraclelinux.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/sh/rcar/ssi.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -449,25 +449,29 @@ static bool rsnd_ssi_pointer_update(stru int byte) { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); + bool ret = false; + int byte_pos; - ssi->byte_pos += byte; + byte_pos = ssi->byte_pos + byte; - if (ssi->byte_pos >= ssi->next_period_byte) { + if (byte_pos >= ssi->next_period_byte) { struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); ssi->period_pos++; ssi->next_period_byte += ssi->byte_per_period; if (ssi->period_pos >= runtime->periods) { - ssi->byte_pos = 0; + byte_pos = 0; ssi->period_pos = 0; ssi->next_period_byte = ssi->byte_per_period; } - return true; + ret = true; } - return false; + WRITE_ONCE(ssi->byte_pos, byte_pos); + + return ret; } /* @@ -838,7 +842,7 @@ static int rsnd_ssi_pointer(struct rsnd_ struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); - *pointer = bytes_to_frames(runtime, ssi->byte_pos); + *pointer = bytes_to_frames(runtime, READ_ONCE(ssi->byte_pos)); return 0; } Patches currently in stable-queue which might be from jiada_wang(a)mentor.com are queue-4.14/asoc-rsnd-ssi-fix-race-condition-in-rsnd_ssi_pointer_update.patch

7 years, 10 months

1
0
0 0

Patch "ASoC: rockchip: disable clock on error" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: rockchip: disable clock on error to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-rockchip-disable-clock-on-error.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Stefan Potyra <Stefan.Potyra(a)elektrobit.com> Date: Wed, 6 Dec 2017 16:03:24 +0100 Subject: ASoC: rockchip: disable clock on error From: Stefan Potyra <Stefan.Potyra(a)elektrobit.com> [ Upstream commit c7b92172a61b91936be985cb9bc499a4ebc6489b ] Disable the clocks in rk_spdif_probe when an error occurs after one of the clocks has been enabled previously. Found by Linux Driver Verification project (linuxtesting.org). Fixes: f874b80e1571 ASoC: rockchip: Add rockchip SPDIF transceiver driver Signed-off-by: Stefan Potyra <Stefan.Potyra(a)elektrobit.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/rockchip/rockchip_spdif.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) --- a/sound/soc/rockchip/rockchip_spdif.c +++ b/sound/soc/rockchip/rockchip_spdif.c @@ -322,26 +322,30 @@ static int rk_spdif_probe(struct platfor spdif->mclk = devm_clk_get(&pdev->dev, "mclk"); if (IS_ERR(spdif->mclk)) { dev_err(&pdev->dev, "Can't retrieve rk_spdif master clock\n"); - return PTR_ERR(spdif->mclk); + ret = PTR_ERR(spdif->mclk); + goto err_disable_hclk; } ret = clk_prepare_enable(spdif->mclk); if (ret) { dev_err(spdif->dev, "clock enable failed %d\n", ret); - return ret; + goto err_disable_clocks; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(regs)) - return PTR_ERR(regs); + if (IS_ERR(regs)) { + ret = PTR_ERR(regs); + goto err_disable_clocks; + } spdif->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "hclk", regs, &rk_spdif_regmap_config); if (IS_ERR(spdif->regmap)) { dev_err(&pdev->dev, "Failed to initialise managed register map\n"); - return PTR_ERR(spdif->regmap); + ret = PTR_ERR(spdif->regmap); + goto err_disable_clocks; } spdif->playback_dma_data.addr = res->start + SPDIF_SMPDR; @@ -373,6 +377,10 @@ static int rk_spdif_probe(struct platfor err_pm_runtime: pm_runtime_disable(&pdev->dev); +err_disable_clocks: + clk_disable_unprepare(spdif->mclk); +err_disable_hclk: + clk_disable_unprepare(spdif->hclk); return ret; } Patches currently in stable-queue which might be from Stefan.Potyra(a)elektrobit.com are queue-4.14/asoc-rockchip-disable-clock-on-error.patch

7 years, 10 months

1
0
0 0

Patch "ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-omap2-fix-sram-virt-to-phys-translation-for-save_secure_ram_context.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Mon, 27 Nov 2017 08:57:26 -0800 Subject: ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit d09220a887f70368afa79e850c95e74890c0a32d ] With the CMA changes from Joonsoo Kim <iamjoonsoo.kim(a)lge.com>, it was noticed that n900 stopped booting. After investigating it turned out that n900 save_secure_ram_context does some whacky virtual to physical address translation for the SRAM data address. As we now only have minimal parts of omap3 idle code copied to SRAM, running save_secure_ram_context() in SRAM is not needed. It only gets called on PM init. And it seems there's no need to ever call this from SRAM idle code. So let's just keep save_secure_ram_context() in DDR, and pass it the physical address of the parameters. We can do everything else in omap-secure.c like we already do for other secure code. And since we don't have any documentation, I still have no clue what the values for 0, 1 and 1 for the parameters might be. If somebody has figured it out, please do send a patch to add some comments. Debugged-by: Joonsoo Kim <iamjoonsoo.kim(a)lge.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/mach-omap2/omap-secure.c | 19 +++++++++++++++++++ arch/arm/mach-omap2/omap-secure.h | 4 ++++ arch/arm/mach-omap2/pm.h | 4 ---- arch/arm/mach-omap2/pm34xx.c | 13 ++++--------- arch/arm/mach-omap2/sleep34xx.S | 26 ++++---------------------- 5 files changed, 31 insertions(+), 35 deletions(-) --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -73,6 +73,25 @@ phys_addr_t omap_secure_ram_mempool_base return omap_secure_memblock_base; } +u32 omap3_save_secure_ram(void __iomem *addr, int size) +{ + u32 ret; + u32 param[5]; + + if (size != OMAP3_SAVE_SECURE_RAM_SZ) + return OMAP3_SAVE_SECURE_RAM_SZ; + + param[0] = 4; /* Number of arguments */ + param[1] = __pa(addr); /* Physical address for saving */ + param[2] = 0; + param[3] = 1; + param[4] = 1; + + ret = save_secure_ram_context(__pa(param)); + + return ret; +} + /** * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls * @idx: The PPA API index --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -31,6 +31,8 @@ /* Maximum Secure memory storage size */ #define OMAP_SECURE_RAM_STORAGE (88 * SZ_1K) +#define OMAP3_SAVE_SECURE_RAM_SZ 0x803F + /* Secure low power HAL API index */ #define OMAP4_HAL_SAVESECURERAM_INDEX 0x1a #define OMAP4_HAL_SAVEHW_INDEX 0x1b @@ -65,6 +67,8 @@ extern u32 omap_smc2(u32 id, u32 falg, u extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs); extern phys_addr_t omap_secure_ram_mempool_base(void); extern int omap_secure_ram_reserve_memblock(void); +extern u32 save_secure_ram_context(u32 args_pa); +extern u32 omap3_save_secure_ram(void __iomem *save_regs, int size); extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs, u32 arg1, u32 arg2, u32 arg3, u32 arg4); --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -81,10 +81,6 @@ extern unsigned int omap3_do_wfi_sz; /* ... and its pointer from SRAM after copy */ extern void (*omap3_do_wfi_sram)(void); -/* save_secure_ram_context function pointer and size, for copy to SRAM */ -extern int save_secure_ram_context(u32 *addr); -extern unsigned int save_secure_ram_context_sz; - extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -48,6 +48,7 @@ #include "prm3xxx.h" #include "pm.h" #include "sdrc.h" +#include "omap-secure.h" #include "sram.h" #include "control.h" #include "vc.h" @@ -66,7 +67,6 @@ struct power_state { static LIST_HEAD(pwrst_list); -static int (*_omap_save_secure_sram)(u32 *addr); void (*omap3_do_wfi_sram)(void); static struct powerdomain *mpu_pwrdm, *neon_pwrdm; @@ -121,8 +121,8 @@ static void omap3_save_secure_ram_contex * will hang the system. */ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); - ret = _omap_save_secure_sram((u32 *)(unsigned long) - __pa(omap3_secure_ram_storage)); + ret = omap3_save_secure_ram(omap3_secure_ram_storage, + OMAP3_SAVE_SECURE_RAM_SZ); pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { @@ -434,15 +434,10 @@ static int __init pwrdms_setup(struct po * * The minimum set of functions is pushed to SRAM for execution: * - omap3_do_wfi for erratum i581 WA, - * - save_secure_ram_context for security extensions. */ void omap_push_sram_idle(void) { omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz); - - if (omap_type() != OMAP2_DEVICE_TYPE_GP) - _omap_save_secure_sram = omap_sram_push(save_secure_ram_context, - save_secure_ram_context_sz); } static void __init pm_errata_configure(void) @@ -553,7 +548,7 @@ int __init omap3_pm_init(void) clkdm_add_wkdep(neon_clkdm, mpu_clkdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { omap3_secure_ram_storage = - kmalloc(0x803F, GFP_KERNEL); + kmalloc(OMAP3_SAVE_SECURE_RAM_SZ, GFP_KERNEL); if (!omap3_secure_ram_storage) pr_err("Memory allocation failed when allocating for secure sram context\n"); --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -93,20 +93,13 @@ ENTRY(enable_omap3630_toggle_l2_on_resto ENDPROC(enable_omap3630_toggle_l2_on_restore) /* - * Function to call rom code to save secure ram context. This gets - * relocated to SRAM, so it can be all in .data section. Otherwise - * we need to initialize api_params separately. + * Function to call rom code to save secure ram context. + * + * r0 = physical address of the parameters */ - .data - .align 3 ENTRY(save_secure_ram_context) stmfd sp!, {r4 - r11, lr} @ save registers on stack - adr r3, api_params @ r3 points to parameters - str r0, [r3,#0x4] @ r0 has sdram address - ldr r12, high_mask - and r3, r3, r12 - ldr r12, sram_phy_addr_mask - orr r3, r3, r12 + mov r3, r0 @ physical address of parameters mov r0, #25 @ set service ID for PPA mov r12, r0 @ copy secure service ID in r12 mov r1, #0 @ set task id for ROM code in r1 @@ -120,18 +113,7 @@ ENTRY(save_secure_ram_context) nop nop ldmfd sp!, {r4 - r11, pc} - .align -sram_phy_addr_mask: - .word SRAM_BASE_P -high_mask: - .word 0xffff -api_params: - .word 0x4, 0x0, 0x0, 0x1, 0x1 ENDPROC(save_secure_ram_context) -ENTRY(save_secure_ram_context_sz) - .word . - save_secure_ram_context - - .text /* * ====================== Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.14/arm-dts-fix-elm-interrupt-compiler-warning.patch queue-4.14/arm-omap2-fix-sram-virt-to-phys-translation-for-save_secure_ram_context.patch queue-4.14/arm-dts-fix-omap4-hang-with-gps-connected-to-usb-by-using-wakeupgen.patch queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 10 months

1
0
0 0

Patch "ARM: dts: logicpd-somlv: Fix wl127x pinmux" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: logicpd-somlv: Fix wl127x pinmux to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Adam Ford <aford173(a)gmail.com> Date: Tue, 31 Oct 2017 13:45:59 -0500 Subject: ARM: dts: logicpd-somlv: Fix wl127x pinmux From: Adam Ford <aford173(a)gmail.com> [ Upstream commit cd7594ac3281722cb8f10d6f6c7e4287747c7a9d ] The pin assignment for the wl127x interrupt was incorrect. I am not sure how this every worked. This also eliminates a conflict with the SMC911x ethernet driver and properly moves pinmuxes for the related gpio to omap3_pmx_wkup from omap3_pmx_core. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford <aford173(a)gmail.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -121,7 +121,7 @@ &mmc3 { interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; - pinctrl-0 = <&mmc3_pins>; + pinctrl-0 = <&mmc3_pins &wl127x_gpio>; pinctrl-names = "default"; vmmc-supply = <&wl12xx_vmmc>; non-removable; @@ -132,8 +132,8 @@ wlcore: wlcore@2 { compatible = "ti,wl1273"; reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */ ref-clock-frequency = <26000000>; }; }; @@ -157,8 +157,6 @@ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ - OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ - OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */ >; @@ -228,6 +226,12 @@ OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ >; }; + wl127x_gpio: pinmux_wl127x_gpio_pin { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + >; + }; }; &omap3_pmx_core2 { Patches currently in stable-queue which might be from aford173(a)gmail.com are queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch

7 years, 10 months

1
0
0 0

Patch "ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Adam Ford <aford173(a)gmail.com> Date: Tue, 31 Oct 2017 13:42:13 -0500 Subject: ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet From: Adam Ford <aford173(a)gmail.com> [ Upstream commit 3c18bbf3d11d2005da08b57ff26f44ff1c2b12d0 ] This patch fixes and issue where the NAND and GPMC based ethernet controller stopped working. This also updates the GPMC settings to be consistent with the Logic PD Torpedo development from the commit listed above. Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes") Signed-off-by: Adam Ford <aford173(a)gmail.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 3 ++- arch/arm/boot/dts/logicpd-som-lv.dtsi | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -72,7 +72,8 @@ }; &gpmc { - ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ ethernet@gpmc { pinctrl-names = "default"; --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -37,7 +37,7 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { compatible = "ti,omap2-nand"; Patches currently in stable-queue which might be from aford173(a)gmail.com are queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch

7 years, 10 months

1
0
0 0

Patch "ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-fix-omap4-hang-with-gps-connected-to-usb-by-using-wakeupgen.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Fri, 17 Nov 2017 08:56:58 -0800 Subject: ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit cf87634c8b24e24bf379b8c6807c8b0fb5f23567 ] There's been a reproducable USB OHCI/EHCI cpuidle related hang on omap4 for a while that happens after about 20 - 40 minutes on an idle system with some data feeding device being connected, like a USB GPS device or a cellular modem. This issue happens in cpuidle states C2 and C3 and does not happen if cpuidle is limited to C1 state only. The symptoms are that the whole system hangs and never wakes up from idle, and if a watchdog is configured the system reboots after a while. Turns out that OHCI/EHCI devices on omap4 are trying to use the GIC interrupt controller directly as a parent instead of the WUGEN. We need to pass the interrupts through WUGEN to GIC to provide the wakeup events for the processor. Let's fix the issue by removing the gic interrupt-parent and use the default interrupt-parent wakeupgen instead. Note that omap5.dtsi had this already fixes earlier by commit 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains") but we somehow missed omap4 at that point. Fixes: 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains") Cc: Dave Gerlach <d-gerlach(a)ti.com> Cc: Nishanth Menon <nm(a)ti.com> Cc: Marc Zyngier <marc.zyngier(a)arm.com> Cc: Sebastian Reichel <sebastian.reichel(a)collabora.co.uk> Reviewed-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/omap4.dtsi | 2 -- 1 file changed, 2 deletions(-) --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -861,14 +861,12 @@ usbhsohci: ohci@4a064800 { compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; }; usbhsehci: ehci@4a064c00 { compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; }; Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.14/arm-dts-fix-elm-interrupt-compiler-warning.patch queue-4.14/arm-omap2-fix-sram-virt-to-phys-translation-for-save_secure_ram_context.patch queue-4.14/arm-dts-fix-omap4-hang-with-gps-connected-to-usb-by-using-wakeupgen.patch queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 10 months

1
0
0 0

Patch "ARM: dts: Fix elm interrupt compiler warning" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Fix elm interrupt compiler warning to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-fix-elm-interrupt-compiler-warning.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Mon, 4 Dec 2017 08:27:17 -0800 Subject: ARM: dts: Fix elm interrupt compiler warning From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit d364b038bc962f494cffb8f6cb6cddbe41bcb5b6 ] Looks like the interrupt property is missing the controller and level information causing: Warning (interrupts_property): interrupts size is (4), expected multiple of 12 in /ocp/elm@48078000 Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/omap4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -354,7 +354,7 @@ elm: elm@48078000 { compatible = "ti,am3352-elm"; reg = <0x48078000 0x2000>; - interrupts = <4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "elm"; status = "disabled"; }; Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.14/arm-dts-fix-elm-interrupt-compiler-warning.patch queue-4.14/arm-omap2-fix-sram-virt-to-phys-translation-for-save_secure_ram_context.patch queue-4.14/arm-dts-fix-omap4-hang-with-gps-connected-to-usb-by-using-wakeupgen.patch queue-4.14/arm-dts-logicpd-som-lv-fix-gpmc-addresses-for-nand-and-enet.patch queue-4.14/arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch queue-4.14/arm-dts-logicpd-somlv-fix-wl127x-pinmux.patch queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 10 months

1
0
0 0

Patch "ARM: dts: am437x-cm-t43: Correct the dmas property of spi0" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: am437x-cm-t43: Correct the dmas property of spi0 to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Date: Wed, 1 Nov 2017 11:03:40 +0200 Subject: ARM: dts: am437x-cm-t43: Correct the dmas property of spi0 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> [ Upstream commit ca41e244517d6d3f1600c229ff7ca615049c1e9c ] The DMA binding for eDMA needs 2 parameters, not 1. The second, missing parameter is the tptc to be used for the channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am437x-cm-t43.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -301,8 +301,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - dmas = <&edma 16 - &edma 17>; + dmas = <&edma 16 0 + &edma 17 0>; dma-names = "tx0", "rx0"; flash: w25q64cvzpig@0 { Patches currently in stable-queue which might be from peter.ujfalusi(a)ti.com are queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 10 months

1
0
0 0

Patch "ARM: dts: am4372: Correct the interrupts_properties of McASP" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: am4372: Correct the interrupts_properties of McASP to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Date: Wed, 1 Nov 2017 11:03:31 +0200 Subject: ARM: dts: am4372: Correct the interrupts_properties of McASP From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> [ Upstream commit 627395a6f8091c0aa18f49dca7df59ba3ec147ef ] Fixes the following warnings: arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /ocp@44000000/mcasp@48038000 arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /ocp@44000000/mcasp@4803C000 Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am4372.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -927,7 +927,8 @@ reg = <0x48038000 0x2000>, <0x46000000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <80>, <81>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8 2>, @@ -941,7 +942,8 @@ reg = <0x4803C000 0x2000>, <0x46400000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <82>, <83>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10 2>, Patches currently in stable-queue which might be from peter.ujfalusi(a)ti.com are queue-4.14/arm-dts-am4372-correct-the-interrupts_properties-of-mcasp.patch queue-4.14/arm-dts-am437x-cm-t43-correct-the-dmas-property-of-spi0.patch

7 years, 10 months

1
0
0 0

Patch "ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Keerthy <j-keerthy(a)ti.com> Date: Fri, 10 Nov 2017 16:56:52 +0530 Subject: ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function From: Keerthy <j-keerthy(a)ti.com> [ Upstream commit b6d6af7226465b6d11eac09d0be2ab78a4a9eb62 ] Referring TRM Am335X series: http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf The LastPowerStateEntered bitfield is present only for PM_CEFUSE domain. This is not present in any of the other power domains. Hence remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly reads the reserved bit fields for all the other power domains. Reading the reserved bits leads to wrongly interpreting the low power transitions for various power domains that do not have the LastPowerStateEntered field. The pm debug counters values are wrong currently as we are incrementing them based on the reserved bits. Signed-off-by: Keerthy <j-keerthy(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/mach-omap2/prm33xx.c | 12 ------------ 1 file changed, 12 deletions(-) --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -176,17 +176,6 @@ static int am33xx_pwrdm_read_pwrst(struc return v; } -static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); - v &= AM33XX_LASTPOWERSTATEENTERED_MASK; - v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT; - - return v; -} - static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) { am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK, @@ -357,7 +346,6 @@ struct pwrdm_ops am33xx_pwrdm_operations .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst, .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst, .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst, - .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst, .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst, .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst, .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst, Patches currently in stable-queue which might be from j-keerthy(a)ti.com are queue-4.14/gpio-davinci-assign-first-bank-regs-for-unbanked-case.patch queue-4.14/arm-am33xx-prm-remove-am33xx_pwrdm_read_prev_pwrst-function.patch

7 years, 10 months

1
0
0 0

Patch "509: fix printing uninitialized stack memory when OID is empty" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled 509: fix printing uninitialized stack memory when OID is empty to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: 509-fix-printing-uninitialized-stack-memory-when-oid-is-empty.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 11:45:09 CET 2018 From: Eric Biggers <ebiggers3(a)gmail.com> Date: Fri, 8 Dec 2017 15:13:28 +0000 Subject: 509: fix printing uninitialized stack memory when OID is empty From: Eric Biggers <ebiggers3(a)gmail.com> [ Upstream commit 8dfd2f22d3bf3ab7714f7495ad5d897b8845e8c1 ] Callers of sprint_oid() do not check its return value before printing the result. In the case where the OID is zero-length, -EBADMSG was being returned without anything being written to the buffer, resulting in uninitialized stack memory being printed. Fix this by writing "(bad)" to the buffer in the cases where -EBADMSG is returned. Fixes: 4f73175d0375 ("X.509: Add utility functions to render OIDs as strings") Signed-off-by: Eric Biggers <ebiggers(a)google.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- lib/oid_registry.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/lib/oid_registry.c +++ b/lib/oid_registry.c @@ -116,7 +116,7 @@ int sprint_oid(const void *data, size_t int count; if (v >= end) - return -EBADMSG; + goto bad; n = *v++; ret = count = snprintf(buffer, bufsize, "%u.%u", n / 40, n % 40); @@ -134,7 +134,7 @@ int sprint_oid(const void *data, size_t num = n & 0x7f; do { if (v >= end) - return -EBADMSG; + goto bad; n = *v++; num <<= 7; num |= n & 0x7f; @@ -148,6 +148,10 @@ int sprint_oid(const void *data, size_t } return ret; + +bad: + snprintf(buffer, bufsize, "(bad)"); + return -EBADMSG; } EXPORT_SYMBOL_GPL(sprint_oid); Patches currently in stable-queue which might be from ebiggers3(a)gmail.com are queue-4.14/509-fix-printing-uninitialized-stack-memory-when-oid-is-empty.patch

7 years, 10 months

1
0
0 0

Patch "xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies." has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies. to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xfrm-fix-stack-out-of-bounds-with-misconfigured-transport-mode-policies.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Steffen Klassert <steffen.klassert(a)secunet.com> Date: Fri, 8 Dec 2017 08:07:25 +0100 Subject: xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies. From: Steffen Klassert <steffen.klassert(a)secunet.com> [ Upstream commit 732706afe1cc46ef48493b3d2b69c98f36314ae4 ] On policies with a transport mode template, we pass the addresses from the flowi to xfrm_state_find(), assuming that the IP addresses (and address family) don't change during transformation. Unfortunately our policy template validation is not strict enough. It is possible to configure policies with transport mode template where the address family of the template does not match the selectors address family. This lead to stack-out-of-bound reads because we compare arddesses of the wrong family. Fix this by refusing such a configuration, address family can not change on transport mode. We use the assumption that, on transport mode, the first templates address family must match the address family of the policy selector. Subsequent transport mode templates must mach the address family of the previous template. Signed-off-by: Steffen Klassert <steffen.klassert(a)secunet.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/xfrm/xfrm_user.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1349,11 +1349,14 @@ static void copy_templates(struct xfrm_p static int validate_tmpl(int nr, struct xfrm_user_tmpl *ut, u16 family) { + u16 prev_family; int i; if (nr > XFRM_MAX_DEPTH) return -EINVAL; + prev_family = family; + for (i = 0; i < nr; i++) { /* We never validated the ut->family value, so many * applications simply leave it at zero. The check was @@ -1365,6 +1368,12 @@ static int validate_tmpl(int nr, struct if (!ut[i].family) ut[i].family = family; + if ((ut[i].mode == XFRM_MODE_TRANSPORT) && + (ut[i].family != prev_family)) + return -EINVAL; + + prev_family = ut[i].family; + switch (ut[i].family) { case AF_INET: break; Patches currently in stable-queue which might be from steffen.klassert(a)secunet.com are queue-3.18/xfrm-fix-stack-out-of-bounds-with-misconfigured-transport-mode-policies.patch queue-3.18/xfrm-check-id-proto-in-validate_tmpl.patch

7 years, 10 months

1
0
0 0

Patch "xen: XEN_ACPI_PROCESSOR is Dom0-only" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xen: XEN_ACPI_PROCESSOR is Dom0-only to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xen-xen_acpi_processor-is-dom0-only.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Jan Beulich <JBeulich(a)suse.com> Date: Tue, 12 Dec 2017 03:18:11 -0700 Subject: xen: XEN_ACPI_PROCESSOR is Dom0-only From: Jan Beulich <JBeulich(a)suse.com> [ Upstream commit c4f9d9cb2c29ff04c6b4bb09b72802d8aedfc7cb ] Add a respective dependency. Signed-off-by: Jan Beulich <jbeulich(a)suse.com> Reviewed-by: Juergen Gross <jgross(a)suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/xen/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -222,7 +222,7 @@ config XEN_ACPI_HOTPLUG_CPU config XEN_ACPI_PROCESSOR tristate "Xen ACPI processor" - depends on XEN && X86 && ACPI_PROCESSOR && CPU_FREQ + depends on XEN && XEN_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ default m help This ACPI processor uploads Power Management information to the Xen Patches currently in stable-queue which might be from JBeulich(a)suse.com are queue-3.18/xen-xen_acpi_processor-is-dom0-only.patch

7 years, 10 months

1
0
0 0

Patch "x86/mm/kmmio: Fix mmiotrace for page unaligned addresses" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/mm/kmmio: Fix mmiotrace for page unaligned addresses to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-mm-kmmio-fix-mmiotrace-for-page-unaligned-addresses.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Karol Herbst <kherbst(a)redhat.com> Date: Mon, 27 Nov 2017 08:51:39 +0100 Subject: x86/mm/kmmio: Fix mmiotrace for page unaligned addresses From: Karol Herbst <kherbst(a)redhat.com> [ Upstream commit 6d60ce384d1d5ca32b595244db4077a419acc687 ] If something calls ioremap() with an address not aligned to PAGE_SIZE, the returned address might be not aligned as well. This led to a probe registered on exactly the returned address, but the entire page was armed for mmiotracing. On calling iounmap() the address passed to unregister_kmmio_probe() was PAGE_SIZE aligned by the caller leading to a complete freeze of the machine. We should always page align addresses while (un)registerung mappings, because the mmiotracer works on top of pages, not mappings. We still keep track of the probes based on their real addresses and lengths though, because the mmiotrace still needs to know what are mapped memory regions. Also move the call to mmiotrace_iounmap() prior page aligning the address, so that all probes are unregistered properly, otherwise the kernel ends up failing memory allocations randomly after disabling the mmiotracer. Tested-by: Lyude <lyude(a)redhat.com> Signed-off-by: Karol Herbst <kherbst(a)redhat.com> Acked-by: Pekka Paalanen <ppaalanen(a)gmail.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: nouveau(a)lists.freedesktop.org Link: http://lkml.kernel.org/r/20171127075139.4928-1-kherbst@redhat.com Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/mm/ioremap.c | 4 ++-- arch/x86/mm/kmmio.c | 12 +++++++----- 2 files changed, 9 insertions(+), 7 deletions(-) --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -296,11 +296,11 @@ void iounmap(volatile void __iomem *addr (void __force *)addr < phys_to_virt(ISA_END_ADDRESS)) return; + mmiotrace_iounmap(addr); + addr = (volatile void __iomem *) (PAGE_MASK & (unsigned long __force)addr); - mmiotrace_iounmap(addr); - /* Use the vm area unlocked, assuming the caller ensures there isn't another iounmap for the same address in parallel. Reuse of the virtual address is prevented by --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -434,17 +434,18 @@ int register_kmmio_probe(struct kmmio_pr unsigned long flags; int ret = 0; unsigned long size = 0; + unsigned long addr = p->addr & PAGE_MASK; const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK); unsigned int l; pte_t *pte; spin_lock_irqsave(&kmmio_lock, flags); - if (get_kmmio_probe(p->addr)) { + if (get_kmmio_probe(addr)) { ret = -EEXIST; goto out; } - pte = lookup_address(p->addr, &l); + pte = lookup_address(addr, &l); if (!pte) { ret = -EINVAL; goto out; @@ -453,7 +454,7 @@ int register_kmmio_probe(struct kmmio_pr kmmio_count++; list_add_rcu(&p->list, &kmmio_probes); while (size < size_lim) { - if (add_kmmio_fault_page(p->addr + size)) + if (add_kmmio_fault_page(addr + size)) pr_err("Unable to set page fault.\n"); size += page_level_size(l); } @@ -527,19 +528,20 @@ void unregister_kmmio_probe(struct kmmio { unsigned long flags; unsigned long size = 0; + unsigned long addr = p->addr & PAGE_MASK; const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK); struct kmmio_fault_page *release_list = NULL; struct kmmio_delayed_release *drelease; unsigned int l; pte_t *pte; - pte = lookup_address(p->addr, &l); + pte = lookup_address(addr, &l); if (!pte) return; spin_lock_irqsave(&kmmio_lock, flags); while (size < size_lim) { - release_kmmio_fault_page(p->addr + size, &release_list); + release_kmmio_fault_page(addr + size, &release_list); size += page_level_size(l); } list_del_rcu(&p->list); Patches currently in stable-queue which might be from kherbst(a)redhat.com are queue-3.18/x86-mm-kmmio-fix-mmiotrace-for-page-unaligned-addresses.patch

7 years, 10 months

1
0
0 0

Patch "usb: build drivers/usb/common/ when USB_SUPPORT is set" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: build drivers/usb/common/ when USB_SUPPORT is set to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-build-drivers-usb-common-when-usb_support-is-set.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Randy Dunlap <rdunlap(a)infradead.org> Date: Fri, 17 Nov 2017 11:00:45 -0800 Subject: usb: build drivers/usb/common/ when USB_SUPPORT is set From: Randy Dunlap <rdunlap(a)infradead.org> [ Upstream commit c9d24f78268be444e803fb2bb138a2f598de9c23 ] PHY drivers can use ULPI interfaces when CONFIG_USB (which is host side support) is not enabled, so also build drivers/usb/ when CONFIG_USB_SUPPORT is enabled so that drivers/usb/common/ is built. ERROR: "ulpi_unregister_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "__ulpi_register_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "ulpi_read" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "ulpi_write" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "ulpi_unregister_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined! ERROR: "__ulpi_register_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined! ERROR: "ulpi_write" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/Makefile | 1 + 1 file changed, 1 insertion(+) --- a/drivers/Makefile +++ b/drivers/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_TC) += tc/ obj-$(CONFIG_UWB) += uwb/ obj-$(CONFIG_USB_PHY) += usb/ obj-$(CONFIG_USB) += usb/ +obj-$(CONFIG_USB_SUPPORT) += usb/ obj-$(CONFIG_PCI) += usb/ obj-$(CONFIG_USB_GADGET) += usb/ obj-$(CONFIG_SERIO) += input/serio/ Patches currently in stable-queue which might be from rdunlap(a)infradead.org are queue-3.18/usb-build-drivers-usb-common-when-usb_support-is-set.patch

7 years, 10 months

1
0
0 0

Patch "spi: sun4i: disable clocks in the remove function" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled spi: sun4i: disable clocks in the remove function to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: spi-sun4i-disable-clocks-in-the-remove-function.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Takuo Koguchi <takuo.koguchi(a)gmail.com> Date: Thu, 7 Dec 2017 16:20:14 +0900 Subject: spi: sun4i: disable clocks in the remove function From: Takuo Koguchi <takuo.koguchi(a)gmail.com> [ Upstream commit c810daba0ab5226084a56893a789af427a801146 ] mclk and hclk need to be disabled. Since pm_runtime_disable does not disable the clocks, use pm_runtime_force_suspend instead. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Takuo Koguchi <takuo.koguchi.sw(a)hitachi.com> Acked-by: Maxime Ripard <maxime.ripard(a)free-electrons.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/spi/spi-sun4i.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -458,7 +458,7 @@ err_free_master: static int sun4i_spi_remove(struct platform_device *pdev) { - pm_runtime_disable(&pdev->dev); + pm_runtime_force_suspend(&pdev->dev); return 0; } Patches currently in stable-queue which might be from takuo.koguchi(a)gmail.com are queue-3.18/spi-sun4i-disable-clocks-in-the-remove-function.patch

7 years, 10 months

1
0
0 0

Patch "scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scripts-kernel-doc-don-t-fail-with-status-0-if-error-encountered-with-none.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Will Deacon <will.deacon(a)arm.com> Date: Wed, 29 Nov 2017 15:20:03 +0000 Subject: scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none From: Will Deacon <will.deacon(a)arm.com> [ Upstream commit e814bccbafece52a24e152d2395b5d49eef55841 ] My bisect scripts starting running into build failures when trying to compile 4.15-rc1 with the builds failing with things like: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union! The line in question is actually just a #define, but after some digging it turns out that my scripts pass W=1 and since commit 3a025e1d1c2ea ("Add optional check for bad kernel-doc comments") that results in kernel-doc running on each source file. The file in question has a badly formatted comment immediately before the #define: /** * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for * bus layer usage. */ which causes the regex in dump_struct to fail (lack of braces following struct declaration) and kernel-doc returns 1, which causes the build to fail. Fix the issue by always returning 0 from kernel-doc when invoked with -none. It successfully generates no documentation, and prints out any issues. Cc: Matthew Wilcox <mawilcox(a)microsoft.com> Cc: Jonathan Corbet <corbet(a)lwn.net> Signed-off-by: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Jonathan Corbet <corbet(a)lwn.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- scripts/kernel-doc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -2616,4 +2616,4 @@ if ($verbose && $warnings) { print STDERR "$warnings warnings\n"; } -exit($errors); +exit($output_mode eq "none" ? 0 : $errors); Patches currently in stable-queue which might be from will.deacon(a)arm.com are queue-3.18/scripts-kernel-doc-don-t-fail-with-status-0-if-error-encountered-with-none.patch

7 years, 10 months

1
0
0 0

Patch "s390/dasd: prevent prefix I/O error" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/dasd: prevent prefix I/O error to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-dasd-prevent-prefix-i-o-error.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Stefan Haberland <sth(a)linux.vnet.ibm.com> Date: Thu, 26 Oct 2017 14:37:35 +0200 Subject: s390/dasd: prevent prefix I/O error From: Stefan Haberland <sth(a)linux.vnet.ibm.com> [ Upstream commit da340f921d3454f1521671c7a5a43ad3331fbe50 ] Prevent that a prefix flag is set based on invalid configuration data. The validity.verify_base flag should only be set for alias devices. Usually the unit address type is either one of base, PAV alias or HyperPAV alias. But in cases where the unit address type is not set or any other value the validity.verify_base flag might be set as well. This would lead to follow on errors. Explicitly check for alias devices and set the validity flag only for them. Signed-off-by: Stefan Haberland <sth(a)linux.vnet.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner(a)linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/block/dasd_eckd.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -518,10 +518,12 @@ static int prefix_LRE(struct ccw1 *ccw, pfxdata->validity.define_extent = 1; /* private uid is kept up to date, conf_data may be outdated */ - if (startpriv->uid.type != UA_BASE_DEVICE) { + if (startpriv->uid.type == UA_BASE_PAV_ALIAS) pfxdata->validity.verify_base = 1; - if (startpriv->uid.type == UA_HYPER_PAV_ALIAS) - pfxdata->validity.hyper_pav = 1; + + if (startpriv->uid.type == UA_HYPER_PAV_ALIAS) { + pfxdata->validity.verify_base = 1; + pfxdata->validity.hyper_pav = 1; } /* define extend data (mostly)*/ @@ -2969,10 +2971,12 @@ static int prepare_itcw(struct itcw *itc pfxdata.validity.define_extent = 1; /* private uid is kept up to date, conf_data may be outdated */ - if (startpriv->uid.type != UA_BASE_DEVICE) { + if (startpriv->uid.type == UA_BASE_PAV_ALIAS) + pfxdata.validity.verify_base = 1; + + if (startpriv->uid.type == UA_HYPER_PAV_ALIAS) { pfxdata.validity.verify_base = 1; - if (startpriv->uid.type == UA_HYPER_PAV_ALIAS) - pfxdata.validity.hyper_pav = 1; + pfxdata.validity.hyper_pav = 1; } switch (cmd) { Patches currently in stable-queue which might be from sth(a)linux.vnet.ibm.com are queue-3.18/s390-dasd-prevent-prefix-i-o-error.patch

7 years, 10 months

1
0
0 0

Patch "powerpc/perf: Fix oops when grouping different pmu events" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/perf: Fix oops when grouping different pmu events to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-perf-fix-oops-when-grouping-different-pmu-events.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Ravi Bangoria <ravi.bangoria(a)linux.vnet.ibm.com> Date: Thu, 30 Nov 2017 14:03:22 +0530 Subject: powerpc/perf: Fix oops when grouping different pmu events From: Ravi Bangoria <ravi.bangoria(a)linux.vnet.ibm.com> [ Upstream commit 5aa04b3eb6fca63d2e9827be656dcadc26d54e11 ] When user tries to group imc (In-Memory Collections) event with normal event, (sometime) kernel crashes with following log: Faulting instruction address: 0x00000000 [link register ] c00000000010ce88 power_check_constraints+0x128/0x980 ... c00000000010e238 power_pmu_event_init+0x268/0x6f0 c0000000002dc60c perf_try_init_event+0xdc/0x1a0 c0000000002dce88 perf_event_alloc+0x7b8/0xac0 c0000000002e92e0 SyS_perf_event_open+0x530/0xda0 c00000000000b004 system_call+0x38/0xe0 'event_base' field of 'struct hw_perf_event' is used as flags for normal hw events and used as memory address for imc events. While grouping these two types of events, collect_events() tries to interpret imc 'event_base' as a flag, which causes a corruption resulting in a crash. Consider only those events which belongs to 'perf_hw_context' in collect_events(). Signed-off-by: Ravi Bangoria <ravi.bangoria(a)linux.vnet.ibm.com> Reviewed-By: Madhavan Srinivasan <maddy(a)linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/perf/core-book3s.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1376,7 +1376,7 @@ static int collect_events(struct perf_ev int n = 0; struct perf_event *event; - if (!is_software_event(group)) { + if (group->pmu->task_ctx_nr == perf_hw_context) { if (n >= max_count) return -1; ctrs[n] = group; @@ -1384,7 +1384,7 @@ static int collect_events(struct perf_ev events[n++] = group->hw.config; } list_for_each_entry(event, &group->sibling_list, group_entry) { - if (!is_software_event(event) && + if (event->pmu->task_ctx_nr == perf_hw_context && event->state != PERF_EVENT_STATE_OFF) { if (n >= max_count) return -1; Patches currently in stable-queue which might be from ravi.bangoria(a)linux.vnet.ibm.com are queue-3.18/perf-top-fix-window-dimensions-change-handling.patch queue-3.18/powerpc-perf-fix-oops-when-grouping-different-pmu-events.patch

7 years, 10 months

1
0
0 0

Patch "perf top: Fix window dimensions change handling" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf top: Fix window dimensions change handling to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-top-fix-window-dimensions-change-handling.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Jiri Olsa <jolsa(a)kernel.org> Date: Tue, 14 Nov 2017 10:23:39 +0100 Subject: perf top: Fix window dimensions change handling From: Jiri Olsa <jolsa(a)kernel.org> [ Upstream commit 89d0aeab4252adc2a7ea693637dd21c588bfa2d1 ] The stdio perf top crashes when we change the terminal window size. The reason is that we assumed we get the perf_top pointer as a signal handler argument which is not the case. Changing the SIGWINCH handler logic to change global resize variable, which is checked in the main thread loop. Signed-off-by: Jiri Olsa <jolsa(a)kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Tested-by: Ravi Bangoria <ravi.bangoria(a)linux.vnet.ibm.com> Cc: Adrian Hunter <adrian.hunter(a)intel.com> Cc: Andi Kleen <andi(a)firstfloor.org> Cc: David Ahern <dsahern(a)gmail.com> Cc: Namhyung Kim <namhyung(a)kernel.org> Cc: Wang Nan <wangnan0(a)huawei.com> Link: http://lkml.kernel.org/n/tip-ysuzwz77oev1ftgvdscn9bpu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/builtin-top.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -70,6 +70,7 @@ #include <linux/types.h> static volatile int done; +static volatile int resize; #define HEADER_LINE_NR 5 @@ -79,10 +80,13 @@ static void perf_top__update_print_entri } static void perf_top__sig_winch(int sig __maybe_unused, - siginfo_t *info __maybe_unused, void *arg) + siginfo_t *info __maybe_unused, void *arg __maybe_unused) { - struct perf_top *top = arg; + resize = 1; +} +static void perf_top__resize(struct perf_top *top) +{ get_term_dimensions(&top->winsize); perf_top__update_print_entries(top); } @@ -461,7 +465,7 @@ static bool perf_top__handle_keypress(st .sa_sigaction = perf_top__sig_winch, .sa_flags = SA_SIGINFO, }; - perf_top__sig_winch(SIGWINCH, NULL, top); + perf_top__resize(top); sigaction(SIGWINCH, &act, NULL); } else { signal(SIGWINCH, SIG_DFL); @@ -997,6 +1001,11 @@ static int __cmd_top(struct perf_top *to if (hits == top->samples) ret = perf_evlist__poll(top->evlist, 100); + + if (resize) { + perf_top__resize(top); + resize = 0; + } } ret = 0; Patches currently in stable-queue which might be from jolsa(a)kernel.org are queue-3.18/perf-top-fix-window-dimensions-change-handling.patch

7 years, 10 months

1
0
0 0

Patch "net_sched: red: Avoid illegal values" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net_sched: red: Avoid illegal values to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net_sched-red-avoid-illegal-values.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Nogah Frankel <nogahf(a)mellanox.com> Date: Mon, 4 Dec 2017 13:31:11 +0200 Subject: net_sched: red: Avoid illegal values From: Nogah Frankel <nogahf(a)mellanox.com> [ Upstream commit 8afa10cbe281b10371fee5a87ab266e48d71a7f9 ] Check the qmin & qmax values doesn't overflow for the given Wlog value. Check that qmin <= qmax. Fixes: a783474591f2 ("[PKT_SCHED]: Generic RED layer") Signed-off-by: Nogah Frankel <nogahf(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/net/red.h | 11 +++++++++++ net/sched/sch_choke.c | 3 +++ net/sched/sch_gred.c | 3 +++ net/sched/sch_red.c | 2 ++ net/sched/sch_sfq.c | 3 +++ 5 files changed, 22 insertions(+) --- a/include/net/red.h +++ b/include/net/red.h @@ -167,6 +167,17 @@ static inline void red_set_vars(struct r v->qcount = -1; } +static inline bool red_check_params(u32 qth_min, u32 qth_max, u8 Wlog) +{ + if (fls(qth_min) + Wlog > 32) + return false; + if (fls(qth_max) + Wlog > 32) + return false; + if (qth_max < qth_min) + return false; + return true; +} + static inline void red_set_parms(struct red_parms *p, u32 qth_min, u32 qth_max, u8 Wlog, u8 Plog, u8 Scell_log, u8 *stab, u32 max_P) --- a/net/sched/sch_choke.c +++ b/net/sched/sch_choke.c @@ -431,6 +431,9 @@ static int choke_change(struct Qdisc *sc ctl = nla_data(tb[TCA_CHOKE_PARMS]); + if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog)) + return -EINVAL; + if (ctl->limit > CHOKE_MAX_QUEUE) return -EINVAL; --- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -388,6 +388,9 @@ static inline int gred_change_vq(struct struct gred_sched *table = qdisc_priv(sch); struct gred_sched_data *q = table->tab[dp]; + if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog)) + return -EINVAL; + if (!q) { table->tab[dp] = q = *prealloc; *prealloc = NULL; --- a/net/sched/sch_red.c +++ b/net/sched/sch_red.c @@ -199,6 +199,8 @@ static int red_change(struct Qdisc *sch, max_P = tb[TCA_RED_MAX_P] ? nla_get_u32(tb[TCA_RED_MAX_P]) : 0; ctl = nla_data(tb[TCA_RED_PARMS]); + if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog)) + return -EINVAL; if (ctl->limit > 0) { child = fifo_create_dflt(sch, &bfifo_qdisc_ops, ctl->limit); --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -653,6 +653,9 @@ static int sfq_change(struct Qdisc *sch, if (ctl->divisor && (!is_power_of_2(ctl->divisor) || ctl->divisor > 65536)) return -EINVAL; + if (ctl_v1 && !red_check_params(ctl_v1->qth_min, ctl_v1->qth_max, + ctl_v1->Wlog)) + return -EINVAL; if (ctl_v1 && ctl_v1->qth_min) { p = kmalloc(sizeof(*p), GFP_KERNEL); if (!p) Patches currently in stable-queue which might be from nogahf(a)mellanox.com are queue-3.18/net_sched-red-avoid-devision-by-zero.patch queue-3.18/net_sched-red-avoid-illegal-values.patch

7 years, 10 months

1
0
0 0

Patch "perf bench numa: Fixup discontiguous/sparse numa nodes" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf bench numa: Fixup discontiguous/sparse numa nodes to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-bench-numa-fixup-discontiguous-sparse-numa-nodes.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Satheesh Rajendran <sathnaga(a)linux.vnet.ibm.com> Date: Wed, 22 Nov 2017 22:13:53 +0530 Subject: perf bench numa: Fixup discontiguous/sparse numa nodes From: Satheesh Rajendran <sathnaga(a)linux.vnet.ibm.com> [ Upstream commit 321a7c35c90cc834851ceda18a8ee18f1d032b92 ] Certain systems are designed to have sparse/discontiguous nodes. On such systems, 'perf bench numa' hangs, shows wrong number of nodes and shows values for non-existent nodes. Handle this by only taking nodes that are exposed by kernel to userspace. Signed-off-by: Satheesh Rajendran <sathnaga(a)linux.vnet.ibm.com> Reviewed-by: Srikar Dronamraju <srikar(a)linux.vnet.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao(a)linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1edbcd353c009e109e93d78f2f46381930c340fe.151136864… Signed-off-by: Balamuruhan S <bala24(a)linux.vnet.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/bench/numa.c | 56 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 51 insertions(+), 5 deletions(-) --- a/tools/perf/bench/numa.c +++ b/tools/perf/bench/numa.c @@ -203,6 +203,47 @@ static const char * const numa_usage[] = NULL }; +/* + * To get number of numa nodes present. + */ +static int nr_numa_nodes(void) +{ + int i, nr_nodes = 0; + + for (i = 0; i < g->p.nr_nodes; i++) { + if (numa_bitmask_isbitset(numa_nodes_ptr, i)) + nr_nodes++; + } + + return nr_nodes; +} + +/* + * To check if given numa node is present. + */ +static int is_node_present(int node) +{ + return numa_bitmask_isbitset(numa_nodes_ptr, node); +} + +/* + * To check given numa node has cpus. + */ +static bool node_has_cpus(int node) +{ + struct bitmask *cpu = numa_allocate_cpumask(); + unsigned int i; + + if (cpu && !numa_node_to_cpus(node, cpu)) { + for (i = 0; i < cpu->size; i++) { + if (numa_bitmask_isbitset(cpu, i)) + return true; + } + } + + return false; /* lets fall back to nocpus safely */ +} + static cpu_set_t bind_to_cpu(int target_cpu) { cpu_set_t orig_mask, mask; @@ -231,12 +272,12 @@ static cpu_set_t bind_to_cpu(int target_ static cpu_set_t bind_to_node(int target_node) { - int cpus_per_node = g->p.nr_cpus/g->p.nr_nodes; + int cpus_per_node = g->p.nr_cpus / nr_numa_nodes(); cpu_set_t orig_mask, mask; int cpu; int ret; - BUG_ON(cpus_per_node*g->p.nr_nodes != g->p.nr_cpus); + BUG_ON(cpus_per_node * nr_numa_nodes() != g->p.nr_cpus); BUG_ON(!cpus_per_node); ret = sched_getaffinity(0, sizeof(orig_mask), &orig_mask); @@ -636,7 +677,7 @@ static int parse_setup_node_list(void) int i; for (i = 0; i < mul; i++) { - if (t >= g->p.nr_tasks) { + if (t >= g->p.nr_tasks || !node_has_cpus(bind_node)) { printf("\n# NOTE: ignoring bind NODEs starting at NODE#%d\n", bind_node); goto out; } @@ -943,6 +984,8 @@ static void calc_convergence(double runt sum = 0; for (node = 0; node < g->p.nr_nodes; node++) { + if (!is_node_present(node)) + continue; nr = nodes[node]; nr_min = min(nr, nr_min); nr_max = max(nr, nr_max); @@ -963,8 +1006,11 @@ static void calc_convergence(double runt process_groups = 0; for (node = 0; node < g->p.nr_nodes; node++) { - int processes = count_node_processes(node); + int processes; + if (!is_node_present(node)) + continue; + processes = count_node_processes(node); nr = nodes[node]; tprintf(" %2d/%-2d", nr, processes); @@ -1262,7 +1308,7 @@ static void print_summary(void) printf("\n ###\n"); printf(" # %d %s will execute (on %d nodes, %d CPUs):\n", - g->p.nr_tasks, g->p.nr_tasks == 1 ? "task" : "tasks", g->p.nr_nodes, g->p.nr_cpus); + g->p.nr_tasks, g->p.nr_tasks == 1 ? "task" : "tasks", nr_numa_nodes(), g->p.nr_cpus); printf(" # %5dx %5ldMB global shared mem operations\n", g->p.nr_loops, g->p.bytes_global/1024/1024); printf(" # %5dx %5ldMB process shared mem operations\n", Patches currently in stable-queue which might be from sathnaga(a)linux.vnet.ibm.com are queue-3.18/perf-bench-numa-fixup-discontiguous-sparse-numa-nodes.patch

7 years, 10 months

1
0
0 0

Patch "mm/early_ioremap: Fix boot hang with earlyprintk=efi, keep" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mm-early_ioremap-fix-boot-hang-with-earlyprintk-efi-keep.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Dave Young <dyoung(a)redhat.com> Date: Sat, 9 Dec 2017 12:16:10 +0800 Subject: mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep From: Dave Young <dyoung(a)redhat.com> [ Upstream commit 7f6f60a1ba52538c16f26930bfbcfe193d9d746a ] earlyprintk=efi,keep does not work any more with a warning in mm/early_ioremap.c: WARN_ON(system_state != SYSTEM_BOOTING): Boot just hangs because of the earlyprintk within the earlyprintk implementation code itself. This is caused by a new introduced middle state in: 69a78ff226fe ("init: Introduce SYSTEM_SCHEDULING state") early_ioremap() is fine in both SYSTEM_BOOTING and SYSTEM_SCHEDULING states, original condition should be updated accordingly. Signed-off-by: Dave Young <dyoung(a)redhat.com> Acked-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: bp(a)suse.de Cc: linux-efi(a)vger.kernel.org Cc: linux-mm(a)kvack.org Link: http://lkml.kernel.org/r/20171209041610.GA3249@dhcp-128-65.nay.redhat.com Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- mm/early_ioremap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/mm/early_ioremap.c +++ b/mm/early_ioremap.c @@ -102,7 +102,7 @@ __early_ioremap(resource_size_t phys_add enum fixed_addresses idx; int i, slot; - WARN_ON(system_state != SYSTEM_BOOTING); + WARN_ON(system_state >= SYSTEM_RUNNING); slot = -1; for (i = 0; i < FIX_BTMAPS_SLOTS; i++) { Patches currently in stable-queue which might be from dyoung(a)redhat.com are queue-3.18/mm-early_ioremap-fix-boot-hang-with-earlyprintk-efi-keep.patch

7 years, 10 months

1
0
0 0

Patch "net_sched: red: Avoid devision by zero" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net_sched: red: Avoid devision by zero to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net_sched-red-avoid-devision-by-zero.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Feb 23 12:01:27 CET 2018 From: Nogah Frankel <nogahf(a)mellanox.com> Date: Mon, 4 Dec 2017 13:31:10 +0200 Subject: net_sched: red: Avoid devision by zero From: Nogah Frankel <nogahf(a)mellanox.com> [ Upstream commit 5c472203421ab4f928aa1ae9e1dbcfdd80324148 ] Do not allow delta value to be zero since it is used as a divisor. Fixes: 8af2a218de38 ("sch_red: Adaptative RED AQM") Signed-off-by: Nogah Frankel <nogahf(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/net/red.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/include/net/red.h +++ b/include/net/red.h @@ -178,7 +178,7 @@ static inline void red_set_parms(struct p->qth_max = qth_max << Wlog; p->Wlog = Wlog; p->Plog = Plog; - if (delta < 0) + if (delta <= 0) delta = 1; p->qth_delta = delta; if (!max_P) { Patches currently in stable-queue which might be from nogahf(a)mellanox.com are queue-3.18/net_sched-red-avoid-devision-by-zero.patch queue-3.18/net_sched-red-avoid-illegal-values.patch

7 years, 10 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror