- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] patch "firmware: vpd: Tie firmware kobject to device lifetime" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled firmware: vpd: Tie firmware kobject to device lifetime to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From e4b28b3c3a405b251fa25db58abe1512814a680a Mon Sep 17 00:00:00 2001 From: Guenter Roeck <linux(a)roeck-us.net> Date: Wed, 15 Nov 2017 13:00:44 -0800 Subject: firmware: vpd: Tie firmware kobject to device lifetime It doesn't make sense to have /sys/firmware/vpd if the device is not instantiated, so tie its lifetime to the device. Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver") Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> Cc: stable <stable(a)vger.kernel.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Tested-by: Randy Dunlap <rdunlap(a)infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/firmware/google/vpd.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/firmware/google/vpd.c b/drivers/firmware/google/vpd.c index 84217172297b..942e358efa60 100644 --- a/drivers/firmware/google/vpd.c +++ b/drivers/firmware/google/vpd.c @@ -295,7 +295,17 @@ static int vpd_probe(struct platform_device *pdev) if (ret) return ret; - return vpd_sections_init(entry.cbmem_addr); + vpd_kobj = kobject_create_and_add("vpd", firmware_kobj); + if (!vpd_kobj) + return -ENOMEM; + + ret = vpd_sections_init(entry.cbmem_addr); + if (ret) { + kobject_put(vpd_kobj); + return ret; + } + + return 0; } static int vpd_remove(struct platform_device *pdev) @@ -303,6 +313,8 @@ static int vpd_remove(struct platform_device *pdev) vpd_section_destroy(&ro_vpd); vpd_section_destroy(&rw_vpd); + kobject_put(vpd_kobj); + return 0; } @@ -322,10 +334,6 @@ static int __init vpd_platform_init(void) if (IS_ERR(pdev)) return PTR_ERR(pdev); - vpd_kobj = kobject_create_and_add("vpd", firmware_kobj); - if (!vpd_kobj) - return -ENOMEM; - platform_driver_register(&vpd_driver); return 0; @@ -333,7 +341,6 @@ static int __init vpd_platform_init(void) static void __exit vpd_platform_exit(void) { - kobject_put(vpd_kobj); } module_init(vpd_platform_init); -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "firmware: vpd: Fix platform driver and device" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled firmware: vpd: Fix platform driver and device to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 0631fb8b027f5968c2f5031f0b3ff7be3e4bebcc Mon Sep 17 00:00:00 2001 From: Guenter Roeck <linux(a)roeck-us.net> Date: Wed, 15 Nov 2017 13:00:45 -0800 Subject: firmware: vpd: Fix platform driver and device registration/unregistration The driver exit function needs to unregister both platform device and driver. Also, during registration, register driver first and perform error checks. Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver") Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> Cc: stable <stable(a)vger.kernel.org> Tested-by: Randy Dunlap <rdunlap(a)infradead.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/firmware/google/vpd.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/firmware/google/vpd.c b/drivers/firmware/google/vpd.c index 942e358efa60..e4b40f2b4627 100644 --- a/drivers/firmware/google/vpd.c +++ b/drivers/firmware/google/vpd.c @@ -326,21 +326,29 @@ static struct platform_driver vpd_driver = { }, }; +static struct platform_device *vpd_pdev; + static int __init vpd_platform_init(void) { - struct platform_device *pdev; + int ret; - pdev = platform_device_register_simple("vpd", -1, NULL, 0); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); + ret = platform_driver_register(&vpd_driver); + if (ret) + return ret; - platform_driver_register(&vpd_driver); + vpd_pdev = platform_device_register_simple("vpd", -1, NULL, 0); + if (IS_ERR(vpd_pdev)) { + platform_driver_unregister(&vpd_driver); + return PTR_ERR(vpd_pdev); + } return 0; } static void __exit vpd_platform_exit(void) { + platform_device_unregister(vpd_pdev); + platform_driver_unregister(&vpd_driver); } module_init(vpd_platform_init); -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "firmware: vpd: Destroy vpd sections in remove function" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled firmware: vpd: Destroy vpd sections in remove function to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 811d7e0215fb738fb9a9f0bcb1276516ad161ed1 Mon Sep 17 00:00:00 2001 From: Guenter Roeck <linux(a)roeck-us.net> Date: Wed, 15 Nov 2017 13:00:43 -0800 Subject: firmware: vpd: Destroy vpd sections in remove function vpd sections are initialized during probe and thus should be destroyed in the remove function. Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> Reviewed-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Tested-by: Randy Dunlap <rdunlap(a)infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/firmware/google/vpd.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/google/vpd.c b/drivers/firmware/google/vpd.c index 35e553b3b190..84217172297b 100644 --- a/drivers/firmware/google/vpd.c +++ b/drivers/firmware/google/vpd.c @@ -298,8 +298,17 @@ static int vpd_probe(struct platform_device *pdev) return vpd_sections_init(entry.cbmem_addr); } +static int vpd_remove(struct platform_device *pdev) +{ + vpd_section_destroy(&ro_vpd); + vpd_section_destroy(&rw_vpd); + + return 0; +} + static struct platform_driver vpd_driver = { .probe = vpd_probe, + .remove = vpd_remove, .driver = { .name = "vpd", }, @@ -324,8 +333,6 @@ static int __init vpd_platform_init(void) static void __exit vpd_platform_exit(void) { - vpd_section_destroy(&ro_vpd); - vpd_section_destroy(&rw_vpd); kobject_put(vpd_kobj); } -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "ANDROID: binder: fix transaction leak." added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ANDROID: binder: fix transaction leak. to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From fb2c445277e7b0b4ffe10de8114bad4eccaca948 Mon Sep 17 00:00:00 2001 From: Martijn Coenen <maco(a)android.com> Date: Mon, 13 Nov 2017 10:06:08 +0100 Subject: ANDROID: binder: fix transaction leak. If a call to put_user() fails, we failed to properly free a transaction and send a failed reply (if necessary). Signed-off-by: Martijn Coenen <maco(a)android.com> Cc: stable <stable(a)vger.kernel.org> # 4.14 Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/android/binder.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index a73596a4f804..bccec9de0533 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -1947,6 +1947,26 @@ static void binder_send_failed_reply(struct binder_transaction *t, } } +/** + * binder_cleanup_transaction() - cleans up undelivered transaction + * @t: transaction that needs to be cleaned up + * @reason: reason the transaction wasn't delivered + * @error_code: error to return to caller (if synchronous call) + */ +static void binder_cleanup_transaction(struct binder_transaction *t, + const char *reason, + uint32_t error_code) +{ + if (t->buffer->target_node && !(t->flags & TF_ONE_WAY)) { + binder_send_failed_reply(t, error_code); + } else { + binder_debug(BINDER_DEBUG_DEAD_TRANSACTION, + "undelivered transaction %d, %s\n", + t->debug_id, reason); + binder_free_transaction(t); + } +} + /** * binder_validate_object() - checks for a valid metadata object in a buffer. * @buffer: binder_buffer that we're parsing. @@ -4015,12 +4035,20 @@ static int binder_thread_read(struct binder_proc *proc, if (put_user(cmd, (uint32_t __user *)ptr)) { if (t_from) binder_thread_dec_tmpref(t_from); + + binder_cleanup_transaction(t, "put_user failed", + BR_FAILED_REPLY); + return -EFAULT; } ptr += sizeof(uint32_t); if (copy_to_user(ptr, &tr, sizeof(tr))) { if (t_from) binder_thread_dec_tmpref(t_from); + + binder_cleanup_transaction(t, "copy_to_user failed", + BR_FAILED_REPLY); + return -EFAULT; } ptr += sizeof(tr); @@ -4090,15 +4118,9 @@ static void binder_release_work(struct binder_proc *proc, struct binder_transaction *t; t = container_of(w, struct binder_transaction, work); - if (t->buffer->target_node && - !(t->flags & TF_ONE_WAY)) { - binder_send_failed_reply(t, BR_DEAD_REPLY); - } else { - binder_debug(BINDER_DEBUG_DEAD_TRANSACTION, - "undelivered transaction %d\n", - t->debug_id); - binder_free_transaction(t); - } + + binder_cleanup_transaction(t, "process died.", + BR_DEAD_REPLY); } break; case BINDER_WORK_RETURN_ERROR: { struct binder_error *e = container_of( -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" added to tty-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: Add custom serial.h with BASE_BAUD override for generic kernel to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From c8ec2041f549e7f2dee0c34d25381be6f7805f99 Mon Sep 17 00:00:00 2001 From: Matt Redfearn <matt.redfearn(a)mips.com> Date: Tue, 28 Nov 2017 15:22:20 +0000 Subject: MIPS: Add custom serial.h with BASE_BAUD override for generic kernel Add a custom serial.h header for MIPS, allowing platforms to override the asm-generic version if required. The generic platform uses this header to set BASE_BAUD to 0. The generic platform supports multiple boards, which may have different UART clocks. Also one of the boards supported is the Boston FPGA board, where the UART clock depends on the loaded FPGA bitfile. As such there is no way that the generic kernel can set a compile time default BASE_BAUD. Commit 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure") changed the behavior of of_setup_earlycon such that any baud rate set in the device tree is now set in the earlycon structure. The UART driver will then calculate a divisor based on BASE_BAUD and set it. With MIPS generic kernels this resulted in garbage output due to the incorrect uart clock rate being used to calculate a divisor. This commit, combined with "serial: 8250_early: Only set divisor if valid clk & baud" prevents the earlycon code setting a bad divisor and restores earlycon output. Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure") Cc: stable <stable(a)vger.kernel.org> # 4.14 Signed-off-by: Matt Redfearn <matt.redfearn(a)mips.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/include/asm/Kbuild | 1 - arch/mips/include/asm/serial.h | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 1 deletion(-) create mode 100644 arch/mips/include/asm/serial.h diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild index 7c8aab23bce8..b1f66699677d 100644 --- a/arch/mips/include/asm/Kbuild +++ b/arch/mips/include/asm/Kbuild @@ -16,7 +16,6 @@ generic-y += qrwlock.h generic-y += qspinlock.h generic-y += sections.h generic-y += segment.h -generic-y += serial.h generic-y += trace_clock.h generic-y += unaligned.h generic-y += user.h diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h new file mode 100644 index 000000000000..1d830c6666c2 --- /dev/null +++ b/arch/mips/include/asm/serial.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2017 MIPS Tech, LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __ASM__SERIAL_H +#define __ASM__SERIAL_H + +#ifdef CONFIG_MIPS_GENERIC +/* + * Generic kernels cannot know a correct value for all platforms at + * compile time. Set it to 0 to prevent 8250_early using it + */ +#define BASE_BAUD 0 +#else +#include <asm-generic/serial.h> +#endif + +#endif /* __ASM__SERIAL_H */ -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "firmware: cleanup FIRMWARE_IN_KERNEL message" added to driver-core-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled firmware: cleanup FIRMWARE_IN_KERNEL message to my driver-core git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git in the driver-core-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 0946b2fb38fdb6585a5ac3ca84ac73924f645952 Mon Sep 17 00:00:00 2001 From: "Robin H. Johnson" <robbat2(a)gentoo.org> Date: Thu, 16 Nov 2017 14:36:12 -0800 Subject: firmware: cleanup FIRMWARE_IN_KERNEL message The help for FIRMWARE_IN_KERNEL still references the firmware_install command that was recently removed by commit 5620a0d1aacd ("firmware: delete in-kernel firmware"). Clean up the message to direct the user to their distribution's linux-firmware package, and remove any reference to firmware being included in the kernel source tree. Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware"). Cc: Masahiro Yamada <yamada.masahiro(a)socionext.com> Cc: stable <stable(a)vger.kernel.org> Cc: David Woodhouse <dwmw2(a)infradead.org> Signed-off-by: Robin H. Johnson <robbat2(a)gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/base/Kconfig | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index 2f6614c9a229..bdc87907d6a1 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -91,22 +91,23 @@ config FIRMWARE_IN_KERNEL depends on FW_LOADER default y help - The kernel source tree includes a number of firmware 'blobs' - that are used by various drivers. The recommended way to - use these is to run "make firmware_install", which, after - converting ihex files to binary, copies all of the needed - binary files in firmware/ to /lib/firmware/ on your system so - that they can be loaded by userspace helpers on request. + Various drivers in the kernel source tree may require firmware, + which is generally available in your distribution's linux-firmware + package. + + The linux-firmware package should install firmware into + /lib/firmware/ on your system, so they can be loaded by userspace + helpers on request. Enabling this option will build each required firmware blob - into the kernel directly, where request_firmware() will find - them without having to call out to userspace. This may be - useful if your root file system requires a device that uses - such firmware and do not wish to use an initrd. + specified by EXTRA_FIRMWARE into the kernel directly, where + request_firmware() will find them without having to call out to + userspace. This may be useful if your root file system requires a + device that uses such firmware and you do not wish to use an + initrd. This single option controls the inclusion of firmware for - every driver that uses request_firmware() and ships its - firmware in the kernel source tree, which avoids a + every driver that uses request_firmware(), which avoids a proliferation of 'Include firmware for xxx device' options. Say 'N' and let firmware be loaded from userspace. -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "isa: Prevent NULL dereference in isa_bus driver callbacks" added to driver-core-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled isa: Prevent NULL dereference in isa_bus driver callbacks to my driver-core git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git in the driver-core-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 5a244727f428a06634f22bb890e78024ab0c89f3 Mon Sep 17 00:00:00 2001 From: William Breathitt Gray <vilhelm.gray(a)gmail.com> Date: Wed, 8 Nov 2017 10:23:11 -0500 Subject: isa: Prevent NULL dereference in isa_bus driver callbacks The isa_driver structure for an isa_bus device is stored in the device platform_data member of the respective device structure. This platform_data member may be reset to NULL if isa_driver match callback for the device fails, indicating a device unsupported by the ISA driver. This patch fixes a possible NULL pointer dereference if one of the isa_driver callbacks to attempted for an unsupported device. This error should not occur in practice since ISA devices are typically manually configured and loaded by the users, but we may as well prevent this error from popping up for the 0day testers. Fixes: a5117ba7da37 ("[PATCH] Driver model: add ISA bus") Signed-off-by: William Breathitt Gray <vilhelm.gray(a)gmail.com> Cc: stable <stable(a)vger.kernel.org> Acked-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/base/isa.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/base/isa.c b/drivers/base/isa.c index cd6ccdcf9df0..372d10af2600 100644 --- a/drivers/base/isa.c +++ b/drivers/base/isa.c @@ -39,7 +39,7 @@ static int isa_bus_probe(struct device *dev) { struct isa_driver *isa_driver = dev->platform_data; - if (isa_driver->probe) + if (isa_driver && isa_driver->probe) return isa_driver->probe(dev, to_isa_dev(dev)->id); return 0; @@ -49,7 +49,7 @@ static int isa_bus_remove(struct device *dev) { struct isa_driver *isa_driver = dev->platform_data; - if (isa_driver->remove) + if (isa_driver && isa_driver->remove) return isa_driver->remove(dev, to_isa_dev(dev)->id); return 0; @@ -59,7 +59,7 @@ static void isa_bus_shutdown(struct device *dev) { struct isa_driver *isa_driver = dev->platform_data; - if (isa_driver->shutdown) + if (isa_driver && isa_driver->shutdown) isa_driver->shutdown(dev, to_isa_dev(dev)->id); } @@ -67,7 +67,7 @@ static int isa_bus_suspend(struct device *dev, pm_message_t state) { struct isa_driver *isa_driver = dev->platform_data; - if (isa_driver->suspend) + if (isa_driver && isa_driver->suspend) return isa_driver->suspend(dev, to_isa_dev(dev)->id, state); return 0; @@ -77,7 +77,7 @@ static int isa_bus_resume(struct device *dev) { struct isa_driver *isa_driver = dev->platform_data; - if (isa_driver->resume) + if (isa_driver && isa_driver->resume) return isa_driver->resume(dev, to_isa_dev(dev)->id); return 0; -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] [PATCH] Ensure that the SCSI error handler gets woken up

by Bart Van Assche

If scsi_eh_scmd_add() is called concurrently with scsi_host_queue_ready() while shost->host_blocked > 0 then it can happen that neither function wakes up the SCSI error handler. Fix this by making every function that decreases the host_busy counter to wake up the error handler if necessary. Reported-by: Pavel Tikhomirov <ptikhomirov(a)virtuozzo.com> Fixes: commit 746650160866 ("scsi: convert host_busy to atomic_t") Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Konstantin Khorenko <khorenko(a)virtuozzo.com> Cc: Stuart Hayes <stuart.w.hayes(a)gmail.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Hannes Reinecke <hare(a)suse.com> Cc: Johannes Thumshirn <jthumshirn(a)suse.de> Cc: <stable(a)vger.kernel.org> --- drivers/scsi/scsi_error.c | 3 ++- drivers/scsi/scsi_lib.c | 22 ++++++++++++++-------- 2 files changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 5e89049e9b4e..f7f014c755d7 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -61,9 +61,10 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd); static int scsi_try_to_abort_cmd(struct scsi_host_template *, struct scsi_cmnd *); -/* called with shost->host_lock held */ void scsi_eh_wakeup(struct Scsi_Host *shost) { + lockdep_assert_held(shost->host_lock); + if (atomic_read(&shost->host_busy) == shost->host_failed) { trace_scsi_eh_wakeup(shost); wake_up_process(shost->ehandler); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 1e05e1885ac8..abd37d77af2d 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -318,22 +318,28 @@ static void scsi_init_cmd_errh(struct scsi_cmnd *cmd) cmd->cmd_len = scsi_command_size(cmd->cmnd); } -void scsi_device_unbusy(struct scsi_device *sdev) +static void scsi_dec_host_busy(struct Scsi_Host *shost) { - struct Scsi_Host *shost = sdev->host; - struct scsi_target *starget = scsi_target(sdev); unsigned long flags; atomic_dec(&shost->host_busy); - if (starget->can_queue > 0) - atomic_dec(&starget->target_busy); - if (unlikely(scsi_host_in_recovery(shost) && (shost->host_failed || shost->host_eh_scheduled))) { spin_lock_irqsave(shost->host_lock, flags); scsi_eh_wakeup(shost); spin_unlock_irqrestore(shost->host_lock, flags); } +} + +void scsi_device_unbusy(struct scsi_device *sdev) +{ + struct Scsi_Host *shost = sdev->host; + struct scsi_target *starget = scsi_target(sdev); + + scsi_dec_host_busy(shost); + + if (starget->can_queue > 0) + atomic_dec(&starget->target_busy); atomic_dec(&sdev->device_busy); } @@ -1532,7 +1538,7 @@ static inline int scsi_host_queue_ready(struct request_queue *q, list_add_tail(&sdev->starved_entry, &shost->starved_list); spin_unlock_irq(shost->host_lock); out_dec: - atomic_dec(&shost->host_busy); + scsi_dec_host_busy(shost); return 0; } @@ -2020,7 +2026,7 @@ static blk_status_t scsi_queue_rq(struct blk_mq_hw_ctx *hctx, return BLK_STS_OK; out_dec_host_busy: - atomic_dec(&shost->host_busy); + scsi_dec_host_busy(shost); out_dec_target_busy: if (scsi_target(sdev)->can_queue > 0) atomic_dec(&scsi_target(sdev)->target_busy); -- 2.15.0

7 years, 7 months

6
7
0 0

[Linux-stable-mirror] patch "fpga: region: release of_parse_phandle nodes after use" added to char-misc-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled fpga: region: release of_parse_phandle nodes after use to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the char-misc-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. >From 0f5eb1545907edeea7672a9c1652c4231150ff22 Mon Sep 17 00:00:00 2001 From: Ian Abbott <abbotti(a)mev.co.uk> Date: Wed, 15 Nov 2017 16:33:12 -0600 Subject: fpga: region: release of_parse_phandle nodes after use Both fpga_region_get_manager() and fpga_region_get_bridges() call of_parse_phandle(), but nothing calls of_node_put() on the returned struct device_node pointers. Make sure to do that to stop their reference counters getting out of whack. Fixes: 0fa20cdfcc1f ("fpga: fpga-region: device tree control for FPGA") Cc: <stable(a)vger.kernel.org> # 4.10+ Signed-off-by: Ian Abbott <abbotti(a)mev.co.uk> Signed-off-by: Alan Tull <atull(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/fpga/of-fpga-region.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/fpga/of-fpga-region.c b/drivers/fpga/of-fpga-region.c index c6b21194dcbc..119ff75522f1 100644 --- a/drivers/fpga/of-fpga-region.c +++ b/drivers/fpga/of-fpga-region.c @@ -73,6 +73,7 @@ static struct fpga_manager *of_fpga_region_get_mgr(struct device_node *np) mgr_node = of_parse_phandle(np, "fpga-mgr", 0); if (mgr_node) { mgr = of_fpga_mgr_get(mgr_node); + of_node_put(mgr_node); of_node_put(np); return mgr; } @@ -120,10 +121,13 @@ static int of_fpga_region_get_bridges(struct fpga_region *region) parent_br = region_np->parent; /* If overlay has a list of bridges, use it. */ - if (of_parse_phandle(info->overlay, "fpga-bridges", 0)) + br = of_parse_phandle(info->overlay, "fpga-bridges", 0); + if (br) { + of_node_put(br); np = info->overlay; - else + } else { np = region_np; + } for (i = 0; ; i++) { br = of_parse_phandle(np, "fpga-bridges", i); @@ -131,12 +135,15 @@ static int of_fpga_region_get_bridges(struct fpga_region *region) break; /* If parent bridge is in list, skip it. */ - if (br == parent_br) + if (br == parent_br) { + of_node_put(br); continue; + } /* If node is a bridge, get it and add to list */ ret = of_fpga_bridge_get_to_list(br, info, &region->bridge_list); + of_node_put(br); /* If any of the bridges are in use, give up */ if (ret == -EBUSY) { -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] [PATCH v2] MIPS: Add custom serial.h with BASE_BAUD override for generic kernel

by Matt Redfearn

Add a custom serial.h header for MIPS, allowing platforms to override the asm-generic version if required. The generic platform uses this header to set BASE_BAUD to 0. The generic platform supports multiple boards, which may have different UART clocks. Also one of the boards supported is the Boston FPGA board, where the UART clock depends on the loaded FPGA bitfile. As such there is no way that the generic kernel can set a compile time default BASE_BAUD. Commit 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure") changed the behavior of of_setup_earlycon such that any baud rate set in the device tree is now set in the earlycon structure. The UART driver will then calculate a divisor based on BASE_BAUD and set it. With MIPS generic kernels this resulted in garbage output due to the incorrect uart clock rate being used to calculate a divisor. This commit, combined with "serial: 8250_early: Only set divisor if valid clk & baud" prevents the earlycon code setting a bad divisor and restores earlycon output. Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure") Cc: stable <stable(a)vger.kernel.org> # 4.14 Signed-off-by: Matt Redfearn <matt.redfearn(a)mips.com> --- Changes in v2: GPL v2 arch/mips/include/asm/Kbuild | 1 - arch/mips/include/asm/serial.h | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 1 deletion(-) create mode 100644 arch/mips/include/asm/serial.h diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild index 7c8aab23bce8..b1f66699677d 100644 --- a/arch/mips/include/asm/Kbuild +++ b/arch/mips/include/asm/Kbuild @@ -16,7 +16,6 @@ generic-y += qrwlock.h generic-y += qspinlock.h generic-y += sections.h generic-y += segment.h -generic-y += serial.h generic-y += trace_clock.h generic-y += unaligned.h generic-y += user.h diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h new file mode 100644 index 000000000000..1d830c6666c2 --- /dev/null +++ b/arch/mips/include/asm/serial.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2017 MIPS Tech, LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __ASM__SERIAL_H +#define __ASM__SERIAL_H + +#ifdef CONFIG_MIPS_GENERIC +/* + * Generic kernels cannot know a correct value for all platforms at + * compile time. Set it to 0 to prevent 8250_early using it + */ +#define BASE_BAUD 0 +#else +#include <asm-generic/serial.h> +#endif + +#endif /* __ASM__SERIAL_H */ -- 2.7.4

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] [PATCH 1/2] serial: 8250_early: Only set divisor if valid clk & baud

by Matt Redfearn

If either uartclk or baud are 0, avoid calculating and setting a divisor based on them since the output will almost certainly be garbage. This also allows platforms such as the MIPS generic kernel, which has no way to know a valid BASE_BASE for the board it is actually booted on at compile time, to set BASE_BAUD to 0 and avoid early_8250 setting a bad divisor. This fixes a regression caused by commit 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure"), which changed the behavior of of_setup_earlycon such that it sets a baud rate in the earlycon structure where previously it was left as 0. All boards supported by the MIPS generic kernel started outputting garbage from the boot console due to an incorrect divisor being set. Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure") Cc: stable <stable(a)vger.kernel.org> # 4.14 Signed-off-by: Matt Redfearn <matt.redfearn(a)mips.com> --- drivers/tty/serial/8250/8250_early.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index af72ec32e404..f135c1846477 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -125,12 +125,14 @@ static void __init init_port(struct earlycon_device *device) serial8250_early_out(port, UART_FCR, 0); /* no fifo */ serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */ - divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud); - c = serial8250_early_in(port, UART_LCR); - serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB); - serial8250_early_out(port, UART_DLL, divisor & 0xff); - serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff); - serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); + if (port->uartclk && device->baud) { + divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud); + c = serial8250_early_in(port, UART_LCR); + serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB); + serial8250_early_out(port, UART_DLL, divisor & 0xff); + serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff); + serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); + } } int __init early_serial8250_setup(struct earlycon_device *device, -- 2.7.4

7 years, 7 months

2
3
0 0

[Linux-stable-mirror] [PATCH AUTOSEL for 4.14 01/51] ima: fix hash algorithm initialization

by alexander.levin＠verizon.com

From: Boshi Wang <wangboshi(a)huawei.com> [ Upstream commit ebe7c0a7be92bbd34c6ff5b55810546a0ee05bee ] The hash_setup function always sets the hash_setup_done flag, even when the hash algorithm is invalid. This prevents the default hash algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used. This patch sets hash_setup_done flag only for valid hash algorithms. Fixes: e7a2ad7eb6f4 "ima: enable support for larger default filedata hash algorithms" Signed-off-by: Boshi Wang <wangboshi(a)huawei.com> Signed-off-by: Mimi Zohar <zohar(a)linux.vnet.ibm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> --- security/integrity/ima/ima_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index 2aebb7984437..ab70a395f490 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -51,6 +51,8 @@ static int __init hash_setup(char *str) ima_hash_algo = HASH_ALGO_SHA1; else if (strncmp(str, "md5", 3) == 0) ima_hash_algo = HASH_ALGO_MD5; + else + return 1; goto out; } @@ -60,6 +62,8 @@ static int __init hash_setup(char *str) break; } } + if (i == HASH_ALGO__LAST) + return 1; out: hash_setup_done = 1; return 1; -- 2.11.0

7 years, 7 months

3
54
0 0

Re: [Linux-stable-mirror] [PATCH AUTOSEL for 4.14 18/51] perf callchain: Compare symbol name for inlined frames when matching

by alexander.levin＠verizon.com

On Thu, Nov 23, 2017 at 09:55:37AM +0100, Milian Wolff wrote: >On Wednesday, November 22, 2017 11:25:40 PM CET alexander.levin(a)verizon.com >wrote: >> From: Milian Wolff <milian.wolff(a)kdab.com> >> >> [ Upstream commit 9856240ad3269f2fdab0b2fa4400ef8aab792061 ] > >Hello Alexander, > >this is the first time I encounter AUTOSEL. I just want to check: The patch >below depends on others in a whole series that reworks the handling of inline >frames. Why is only this one getting selected? I don't even think it can work >stand-alone? AUTOSEL just means that it was automatically selected, but I reviewed it before sending. Thanks for the comments, I'll drop the patch. -- Thanks, Sasha

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "serdev: ttyport: fix tty locking in close" added to tty-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serdev: ttyport: fix tty locking in close to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 90dbad8cd6efccbdce109d5ef0724f8434a6cdde Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Fri, 3 Nov 2017 15:30:56 +0100 Subject: serdev: ttyport: fix tty locking in close Make sure to hold the tty lock as required when calling tty-driver close() (e.g. to avoid racing with hangup()). Note that the serport active flag is currently set under the lock at controller open, but really isn't protected by it. Fixes: cd6484e1830b ("serdev: Introduce new bus for serial attached devices") Signed-off-by: Johan Hovold <johan(a)kernel.org> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serdev/serdev-ttyport.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c index 12cb9139073e..247788a16f0b 100644 --- a/drivers/tty/serdev/serdev-ttyport.c +++ b/drivers/tty/serdev/serdev-ttyport.c @@ -154,8 +154,10 @@ static void ttyport_close(struct serdev_controller *ctrl) clear_bit(SERPORT_ACTIVE, &serport->flags); + tty_lock(tty); if (tty->ops->close) tty->ops->close(tty, NULL); + tty_unlock(tty); tty_release_struct(tty, serport->tty_idx); } -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "serdev: ttyport: fix NULL-deref on hangup" added to tty-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serdev: ttyport: fix NULL-deref on hangup to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 8bcd4e6a8decac251d55c4377e2e67f052777ce0 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Fri, 3 Nov 2017 15:30:55 +0100 Subject: serdev: ttyport: fix NULL-deref on hangup Make sure to use a properly refcounted tty_struct in write_wake up to avoid dereferencing a NULL-pointer when a port is being hung up. Fixes: bed35c6dfa6a ("serdev: add a tty port controller driver") Cc: stable <stable(a)vger.kernel.org> # 4.11 Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serdev/serdev-ttyport.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c index 09fbdd52a561..12cb9139073e 100644 --- a/drivers/tty/serdev/serdev-ttyport.c +++ b/drivers/tty/serdev/serdev-ttyport.c @@ -49,12 +49,19 @@ static void ttyport_write_wakeup(struct tty_port *port) { struct serdev_controller *ctrl = port->client_data; struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty; + + tty = tty_port_tty_get(port); + if (!tty) + return; - if (test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &port->tty->flags) && + if (test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) && test_bit(SERPORT_ACTIVE, &serport->flags)) serdev_controller_write_wakeup(ctrl); - wake_up_interruptible_poll(&port->tty->write_wait, POLLOUT); + wake_up_interruptible_poll(&tty->write_wait, POLLOUT); + + tty_kref_put(tty); } static const struct tty_port_client_operations client_ops = { -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "serdev: ttyport: add missing receive_buf sanity checks" added to tty-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serdev: ttyport: add missing receive_buf sanity checks to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From eb281683621b71ab9710d9dccbbef0c2e1769c97 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Fri, 3 Nov 2017 15:30:52 +0100 Subject: serdev: ttyport: add missing receive_buf sanity checks The receive_buf tty-port callback should return the number of bytes accepted and must specifically never return a negative errno (or a value larger than the buffer size) to the tty layer. A serdev driver not providing a receive_buf callback would currently cause the flush_to_ldisc() worker to spin in a tight loop when the tty buffer pointers are incremented with -EINVAL (-22) after data has been received. A serdev driver occasionally returning a negative errno (or a too large byte count) could cause information leaks or crashes when accessing memory outside the tty buffers in consecutive callbacks. Fixes: cd6484e1830b ("serdev: Introduce new bus for serial attached devices") Cc: stable <stable(a)vger.kernel.org> # 4.11 Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serdev/serdev-ttyport.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c index ce7ad0acee7a..09fbdd52a561 100644 --- a/drivers/tty/serdev/serdev-ttyport.c +++ b/drivers/tty/serdev/serdev-ttyport.c @@ -27,11 +27,22 @@ static int ttyport_receive_buf(struct tty_port *port, const unsigned char *cp, { struct serdev_controller *ctrl = port->client_data; struct serport *serport = serdev_controller_get_drvdata(ctrl); + int ret; if (!test_bit(SERPORT_ACTIVE, &serport->flags)) return 0; - return serdev_controller_receive_buf(ctrl, cp, count); + ret = serdev_controller_receive_buf(ctrl, cp, count); + + dev_WARN_ONCE(&ctrl->dev, ret < 0 || ret > count, + "receive_buf returns %d (count = %zu)\n", + ret, count); + if (ret < 0) + return 0; + else if (ret > count) + return count; + + return ret; } static void ttyport_write_wakeup(struct tty_port *port) -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "serial: 8250_early: Only set divisor if valid clk & baud" added to tty-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: 8250_early: Only set divisor if valid clk & baud to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 0ff3ab701963a845d52337ded7eebf2d1a14fe00 Mon Sep 17 00:00:00 2001 From: Matt Redfearn <matt.redfearn(a)mips.com> Date: Wed, 22 Nov 2017 09:57:28 +0000 Subject: serial: 8250_early: Only set divisor if valid clk & baud If either uartclk or baud are 0, avoid calculating and setting a divisor based on them since the output will almost certainly be garbage. This also allows platforms such as the MIPS generic kernel, which has no way to know a valid BASE_BASE for the board it is actually booted on at compile time, to set BASE_BAUD to 0 and avoid early_8250 setting a bad divisor. This fixes a regression caused by commit 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure"), which changed the behavior of of_setup_earlycon such that it sets a baud rate in the earlycon structure where previously it was left as 0. All boards supported by the MIPS generic kernel started outputting garbage from the boot console due to an incorrect divisor being set. Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure") Cc: stable <stable(a)vger.kernel.org> # 4.14 Signed-off-by: Matt Redfearn <matt.redfearn(a)mips.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/8250/8250_early.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 362c25ff188a..ae6a256524d8 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -122,12 +122,14 @@ static void __init init_port(struct earlycon_device *device) serial8250_early_out(port, UART_FCR, 0); /* no fifo */ serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */ - divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud); - c = serial8250_early_in(port, UART_LCR); - serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB); - serial8250_early_out(port, UART_DLL, divisor & 0xff); - serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff); - serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); + if (port->uartclk && device->baud) { + divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud); + c = serial8250_early_in(port, UART_LCR); + serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB); + serial8250_early_out(port, UART_DLL, divisor & 0xff); + serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff); + serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); + } } int __init early_serial8250_setup(struct earlycon_device *device, -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "serial: 8250_pci: Add Amazon PCI serial device ID" added to tty-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: 8250_pci: Add Amazon PCI serial device ID to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 3bfd1300abfe3adb18e84a89d97a0e82a22124bb Mon Sep 17 00:00:00 2001 From: Matt Wilson <msw(a)amazon.com> Date: Mon, 13 Nov 2017 11:31:31 -0800 Subject: serial: 8250_pci: Add Amazon PCI serial device ID This device will be used in future Amazon EC2 instances as the primary serial port (i.e., data sent to this port will be available via the GetConsoleOuput [1] EC2 API). [1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.… Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Matt Wilson <msw(a)amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/8250/8250_pci.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index b7e0e3416641..54adf8d56350 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5135,6 +5135,9 @@ static const struct pci_device_id serial_pci_tbl[] = { { PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 }, { PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 }, + /* Amazon PCI serial device */ + { PCI_DEVICE(0x1d0f, 0x8250), .driver_data = pbn_b0_1_115200 }, + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL -- 2.15.0

7 years, 7 months

1
0
0 0

Re: [Linux-stable-mirror] ARM: tegra: Select appropriate DMA options for LPAE

by Greg KH

On Tue, Nov 28, 2017 at 03:30:56PM +0100, Paul Kocialkowski wrote: > I would like to request that the patch with subject: > ARM: tegra: Select appropriate DMA options for LPAE > and git commit id 6aa26c5d66595494e810c791602d87a572c78808 > be applied to the stable branches for kernel versions v4.12 and v4.13. Both of those branches are "end of life", so there's nothing I can do here, everyone should have already moved to 4.14 by now. thanks, greg k-h

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] [PATCH V3] ovl: Pass ovl_get_nlink() parameters in right order

by Vivek Goyal

Right now we seem to be passing index as "lowerdentry" and origin.dentry as "upperdentry". IIUC, we should pass these parameters in reversed order and this looks like a bug. Fixes: caf70cb2ba5d ("ovl: cleanup orphan index entries") Cc: <stable(a)vger.kernel.org> #4.13 Signed-off-by: Vivek Goyal <vgoyal(a)redhat.com> --- fs/overlayfs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c index 625ed8066570..5ef69bc09e0c 100644 --- a/fs/overlayfs/namei.c +++ b/fs/overlayfs/namei.c @@ -435,7 +435,7 @@ int ovl_verify_index(struct dentry *index, struct ovl_path *lower, /* Check if index is orphan and don't warn before cleaning it */ if (d_inode(index)->i_nlink == 1 && - ovl_get_nlink(index, origin.dentry, 0) == 0) + ovl_get_nlink(origin.dentry, index, 0) == 0) err = -ENOENT; dput(origin.dentry);

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From e43a12f1793ae1fe006e26fe9327a8840a92233c Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Date: Tue, 14 Nov 2017 01:31:15 -0500 Subject: usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub KY-688 USB 3.1 Type-C Hub internally uses a Genesys Logic hub to connect to Realtek r8153. Similar to commit ("7496cfe5431f2 usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter"), no-lpm can make r8153 ethernet work. Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f1dbab6f798f..a10b346b9777 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -146,6 +146,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* appletouch */ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */ + { USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM }, + /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */ { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM }, -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 7fee72d5e8f1e7b8d8212e28291b1a0243ecf2f1 Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Tue, 14 Nov 2017 19:27:22 +0100 Subject: uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices We've been adding this as a quirk on a per device basis hoping that newer disk enclosures would do better, but that has not happened, so simply apply this quirk to all Seagate devices. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/storage/uas-detect.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h index 1fcd758a961f..3734a25e09e5 100644 --- a/drivers/usb/storage/uas-detect.h +++ b/drivers/usb/storage/uas-detect.h @@ -112,6 +112,10 @@ static int uas_use_uas_driver(struct usb_interface *intf, } } + /* All Seagate disk enclosures have broken ATA pass-through support */ + if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bc2) + flags |= US_FL_NO_ATA_1X; + usb_stor_adjust_quirks(udev, &flags); if (flags & US_FL_IGNORE_UAS) { -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "usb: hub: Cycle HUB power when initialization fails" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: hub: Cycle HUB power when initialization fails to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 973593a960ddac0f14f0d8877d2d0abe0afda795 Mon Sep 17 00:00:00 2001 From: Mike Looijmans <mike.looijmans(a)topic.nl> Date: Thu, 9 Nov 2017 13:16:46 +0100 Subject: usb: hub: Cycle HUB power when initialization fails Sometimes the USB device gets confused about the state of the initialization and the connection fails. In particular, the device thinks that it's already set up and running while the host thinks the device still needs to be configured. To work around this issue, power-cycle the hub's output to issue a sort of "reset" to the device. This makes the device restart its state machine and then the initialization succeeds. This fixes problems where the kernel reports a list of errors like this: usb 1-1.3: device not accepting address 19, error -71 The end result is a non-functioning device. After this patch, the sequence becomes like this: usb 1-1.3: new high-speed USB device number 18 using ci_hdrc usb 1-1.3: device not accepting address 18, error -71 usb 1-1.3: new high-speed USB device number 19 using ci_hdrc usb 1-1.3: device not accepting address 19, error -71 usb 1-1-port3: attempt power cycle usb 1-1.3: new high-speed USB device number 21 using ci_hdrc usb-storage 1-1.3:1.2: USB Mass Storage device detected Signed-off-by: Mike Looijmans <mike.looijmans(a)topic.nl> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/hub.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 7ccdd3d4db84..cf7bbcb9a63c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4948,6 +4948,15 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, usb_put_dev(udev); if ((status == -ENOTCONN) || (status == -ENOTSUPP)) break; + + /* When halfway through our retry count, power-cycle the port */ + if (i == (SET_CONFIG_TRIES / 2) - 1) { + dev_info(&port_dev->dev, "attempt power cycle\n"); + usb_hub_set_port_power(hdev, hub, port1, false); + msleep(2 * hub_power_on_good_delay(hub)); + usb_hub_set_port_power(hdev, hub, port1, true); + msleep(hub_power_on_good_delay(hub)); + } } if (hub->hdev->parent || !hcd->driver->port_handed_over || -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "USB: core: Add type-specific length check of BOS descriptors" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: core: Add type-specific length check of BOS descriptors to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 81cf4a45360f70528f1f64ba018d61cb5767249a Mon Sep 17 00:00:00 2001 From: Masakazu Mokuno <masakazu.mokuno(a)gmail.com> Date: Fri, 10 Nov 2017 01:25:50 +0900 Subject: USB: core: Add type-specific length check of BOS descriptors As most of BOS descriptors are longer in length than their header 'struct usb_dev_cap_header', comparing solely with it is not sufficient to avoid out-of-bounds access to BOS descriptors. This patch adds descriptor type specific length check in usb_get_bos_descriptor() to fix the issue. Signed-off-by: Masakazu Mokuno <masakazu.mokuno(a)gmail.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/config.c | 28 ++++++++++++++++++++++++---- include/uapi/linux/usb/ch9.h | 3 +++ 2 files changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index da8acd980fc6..55b198ba629b 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -905,14 +905,25 @@ void usb_release_bos_descriptor(struct usb_device *dev) } } +static const __u8 bos_desc_len[256] = { + [USB_CAP_TYPE_WIRELESS_USB] = USB_DT_USB_WIRELESS_CAP_SIZE, + [USB_CAP_TYPE_EXT] = USB_DT_USB_EXT_CAP_SIZE, + [USB_SS_CAP_TYPE] = USB_DT_USB_SS_CAP_SIZE, + [USB_SSP_CAP_TYPE] = USB_DT_USB_SSP_CAP_SIZE(1), + [CONTAINER_ID_TYPE] = USB_DT_USB_SS_CONTN_ID_SIZE, + [USB_PTM_CAP_TYPE] = USB_DT_USB_PTM_ID_SIZE, +}; + /* Get BOS descriptor set */ int usb_get_bos_descriptor(struct usb_device *dev) { struct device *ddev = &dev->dev; struct usb_bos_descriptor *bos; struct usb_dev_cap_header *cap; + struct usb_ssp_cap_descriptor *ssp_cap; unsigned char *buffer; - int length, total_len, num, i; + int length, total_len, num, i, ssac; + __u8 cap_type; int ret; bos = kzalloc(sizeof(struct usb_bos_descriptor), GFP_KERNEL); @@ -965,7 +976,13 @@ int usb_get_bos_descriptor(struct usb_device *dev) dev->bos->desc->bNumDeviceCaps = i; break; } + cap_type = cap->bDevCapabilityType; length = cap->bLength; + if (bos_desc_len[cap_type] && length < bos_desc_len[cap_type]) { + dev->bos->desc->bNumDeviceCaps = i; + break; + } + total_len -= length; if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) { @@ -973,7 +990,7 @@ int usb_get_bos_descriptor(struct usb_device *dev) continue; } - switch (cap->bDevCapabilityType) { + switch (cap_type) { case USB_CAP_TYPE_WIRELESS_USB: /* Wireless USB cap descriptor is handled by wusb */ break; @@ -986,8 +1003,11 @@ int usb_get_bos_descriptor(struct usb_device *dev) (struct usb_ss_cap_descriptor *)buffer; break; case USB_SSP_CAP_TYPE: - dev->bos->ssp_cap = - (struct usb_ssp_cap_descriptor *)buffer; + ssp_cap = (struct usb_ssp_cap_descriptor *)buffer; + ssac = (le32_to_cpu(ssp_cap->bmAttributes) & + USB_SSP_SUBLINK_SPEED_ATTRIBS) + 1; + if (length >= USB_DT_USB_SSP_CAP_SIZE(ssac)) + dev->bos->ssp_cap = ssp_cap; break; case CONTAINER_ID_TYPE: dev->bos->ss_id = diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h index 41a0a81b01e6..c4c79aa331bd 100644 --- a/include/uapi/linux/usb/ch9.h +++ b/include/uapi/linux/usb/ch9.h @@ -880,6 +880,8 @@ struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ __u8 bReserved; } __attribute__((packed)); +#define USB_DT_USB_WIRELESS_CAP_SIZE 11 + /* USB 2.0 Extension descriptor */ #define USB_CAP_TYPE_EXT 2 @@ -1072,6 +1074,7 @@ struct usb_ptm_cap_descriptor { __u8 bDevCapabilityType; } __attribute__((packed)); +#define USB_DT_USB_PTM_ID_SIZE 3 /* * The size of the descriptor for the Sublink Speed Attribute Count * (SSAC) specified in bmAttributes[4:0]. -- 2.15.0

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] patch "usb: host: fix incorrect updating of offset" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: host: fix incorrect updating of offset to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 1d5a31582ef046d3b233f0da1a68ae26519b2f0a Mon Sep 17 00:00:00 2001 From: Colin Ian King <colin.king(a)canonical.com> Date: Tue, 7 Nov 2017 16:45:04 +0000 Subject: usb: host: fix incorrect updating of offset The variable temp is incorrectly being updated, instead it should be offset otherwise the loop just reads the same capability value and loops forever. Thanks to Alan Stern for pointing out the correct fix to my original fix. Fix also cleans up clang warning: drivers/usb/host/ehci-dbg.c:840:4: warning: Value stored to 'temp' is never read Fixes: d49d43174400 ("USB: misc ehci updates") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/host/ehci-dbg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 19f00424f53e..3ed75aaa09d9 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -827,7 +827,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) default: /* unknown */ break; } - temp = (cap >> 8) & 0xff; + offset = (cap >> 8) & 0xff; } } #endif -- 2.15.0

7 years, 7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror