- Linux-stable-mirror - lists.linaro.org

[PATCH v3] ASoC: sgtl5000: Fix suspend/resume

by Fabio Estevam

From: Fabio Estevam <fabio.estevam(a)nxp.com> Commit 8419caa72702 ("ASoC: sgtl5000: Do not disable regulators in SND_SOC_BIAS_OFF") causes the sgtl5000 to fail after a suspend/resume sequence: # aplay /media/a2002011001-e02.wav Playing WAVE '/media/a2002011001-e02.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo aplay: pcm_write:2051: write error: Input/output error The problem is caused by the fact that the aforementioned commit dropped the cache handling, so re-introduce the register map resync to fix the problem. Cc: <stable(a)vger.kernel.org> Suggested-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- Changes since v2: - Rebased against Linus' tree sound/soc/codecs/sgtl5000.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index e1ab553..7ff5cb7 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -871,15 +871,26 @@ static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream, static int sgtl5000_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { + struct sgtl5000_priv *sgtl = snd_soc_codec_get_drvdata(codec); + int ret; + switch (level) { case SND_SOC_BIAS_ON: case SND_SOC_BIAS_PREPARE: case SND_SOC_BIAS_STANDBY: + regcache_cache_only(sgtl->regmap, false); + ret = regcache_sync(sgtl->regmap); + if (ret) { + regcache_cache_only(sgtl->regmap, true); + return ret; + } + snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_REFTOP_POWERUP, SGTL5000_REFTOP_POWERUP); break; case SND_SOC_BIAS_OFF: + regcache_cache_only(sgtl->regmap, true); snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_REFTOP_POWERUP, 0); break; -- 2.7.4

7 years, 10 months

2
1
0 0

patch "binder: replace "%p" with "%pK"" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled binder: replace "%p" with "%pK" to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 8ca86f1639ec5890d400fff9211aca22d0a392eb Mon Sep 17 00:00:00 2001 From: Todd Kjos <tkjos(a)android.com> Date: Wed, 7 Feb 2018 13:57:37 -0800 Subject: binder: replace "%p" with "%pK" The format specifier "%p" can leak kernel addresses. Use "%pK" instead. There were 4 remaining cases in binder.c. Signed-off-by: Todd Kjos <tkjos(a)google.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/android/binder.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 31322e9a235d..a85f9033b57e 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -2199,7 +2199,7 @@ static void binder_transaction_buffer_release(struct binder_proc *proc, int debug_id = buffer->debug_id; binder_debug(BINDER_DEBUG_TRANSACTION, - "%d buffer release %d, size %zd-%zd, failed at %p\n", + "%d buffer release %d, size %zd-%zd, failed at %pK\n", proc->pid, buffer->debug_id, buffer->data_size, buffer->offsets_size, failed_at); @@ -3711,7 +3711,7 @@ static int binder_thread_write(struct binder_proc *proc, } } binder_debug(BINDER_DEBUG_DEAD_BINDER, - "%d:%d BC_DEAD_BINDER_DONE %016llx found %p\n", + "%d:%d BC_DEAD_BINDER_DONE %016llx found %pK\n", proc->pid, thread->pid, (u64)cookie, death); if (death == NULL) { @@ -5042,7 +5042,7 @@ static void print_binder_transaction_ilocked(struct seq_file *m, spin_lock(&t->lock); to_proc = t->to_proc; seq_printf(m, - "%s %d: %p from %d:%d to %d:%d code %x flags %x pri %ld r%d", + "%s %d: %pK from %d:%d to %d:%d code %x flags %x pri %ld r%d", prefix, t->debug_id, t, t->from ? t->from->proc->pid : 0, t->from ? t->from->pid : 0, @@ -5066,7 +5066,7 @@ static void print_binder_transaction_ilocked(struct seq_file *m, } if (buffer->target_node) seq_printf(m, " node %d", buffer->target_node->debug_id); - seq_printf(m, " size %zd:%zd data %p\n", + seq_printf(m, " size %zd:%zd data %pK\n", buffer->data_size, buffer->offsets_size, buffer->data); } -- 2.16.1

7 years, 10 months

1
0
0 0

patch "ANDROID: binder: synchronize_rcu() when using POLLFREE." added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ANDROID: binder: synchronize_rcu() when using POLLFREE. to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 5eeb2ca02a2f6084fc57ae5c244a38baab07033a Mon Sep 17 00:00:00 2001 From: Martijn Coenen <maco(a)android.com> Date: Fri, 16 Feb 2018 09:47:15 +0100 Subject: ANDROID: binder: synchronize_rcu() when using POLLFREE. To prevent races with ep_remove_waitqueue() removing the waitqueue at the same time. Reported-by: syzbot+a2a3c4909716e271487e(a)syzkaller.appspotmail.com Signed-off-by: Martijn Coenen <maco(a)android.com> Cc: stable <stable(a)vger.kernel.org> # 4.14+ Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/android/binder.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index a85f9033b57e..764b63a5aade 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -4382,6 +4382,15 @@ static int binder_thread_release(struct binder_proc *proc, binder_inner_proc_unlock(thread->proc); + /* + * This is needed to avoid races between wake_up_poll() above and + * and ep_remove_waitqueue() called for other reasons (eg the epoll file + * descriptor being closed); ep_remove_waitqueue() holds an RCU read + * lock, so we can be sure it's done after calling synchronize_rcu(). + */ + if (thread->looper & BINDER_LOOPER_STATE_POLL) + synchronize_rcu(); + if (send_reply) binder_send_failed_reply(send_reply, BR_DEAD_REPLY); binder_release_work(proc, &thread->todo); -- 2.16.1

7 years, 10 months

1
0
0 0

patch "ANDROID: binder: remove WARN() for redundant txn error" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ANDROID: binder: remove WARN() for redundant txn error to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From e46a3b3ba7509cb7fda0e07bc7c63a2cd90f579b Mon Sep 17 00:00:00 2001 From: Todd Kjos <tkjos(a)android.com> Date: Wed, 7 Feb 2018 12:38:47 -0800 Subject: ANDROID: binder: remove WARN() for redundant txn error binder_send_failed_reply() is called when a synchronous transaction fails. It reports an error to the thread that is waiting for the completion. Given that the transaction is synchronous, there should never be more than 1 error response to that thread -- this was being asserted with a WARN(). However, when exercising the driver with syzbot tests, cases were observed where multiple "synchronous" requests were sent without waiting for responses, so it is possible that multiple errors would be reported to the thread. This testing was conducted with panic_on_warn set which forced the crash. This is easily reproduced by sending back-to-back "synchronous" transactions without checking for any response (eg, set read_size to 0): bwr.write_buffer = (uintptr_t)&bc1; bwr.write_size = sizeof(bc1); bwr.read_buffer = (uintptr_t)&br; bwr.read_size = 0; ioctl(fd, BINDER_WRITE_READ, &bwr); sleep(1); bwr2.write_buffer = (uintptr_t)&bc2; bwr2.write_size = sizeof(bc2); bwr2.read_buffer = (uintptr_t)&br; bwr2.read_size = 0; ioctl(fd, BINDER_WRITE_READ, &bwr2); sleep(1); The first transaction is sent to the servicemanager and the reply fails because no VMA is set up by this client. After binder_send_failed_reply() is called, the BINDER_WORK_RETURN_ERROR is sitting on the thread's todo list since the read_size was 0 and the client is not waiting for a response. The 2nd transaction is sent and the BINDER_WORK_RETURN_ERROR has not been consumed, so the thread's reply_error.cmd is still set (normally cleared when the BINDER_WORK_RETURN_ERROR is handled). Therefore when the servicemanager attempts to reply to the 2nd failed transaction, the error is already set and it triggers this warning. This is a user error since it is not waiting for the synchronous transaction to complete. If it ever does check, it will see an error. Changed the WARN() to a pr_warn(). Signed-off-by: Todd Kjos <tkjos(a)android.com> Reported-by: syzbot <syzkaller(a)googlegroups.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/android/binder.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index ad5e662e3e14..31322e9a235d 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -1991,8 +1991,14 @@ static void binder_send_failed_reply(struct binder_transaction *t, &target_thread->reply_error.work); wake_up_interruptible(&target_thread->wait); } else { - WARN(1, "Unexpected reply error: %u\n", - target_thread->reply_error.cmd); + /* + * Cannot get here for normal operation, but + * we can if multiple synchronous transactions + * are sent without blocking for responses. + * Just ignore the 2nd error in this case. + */ + pr_warn("Unexpected reply error: %u\n", + target_thread->reply_error.cmd); } binder_inner_proc_unlock(target_thread->proc); binder_thread_dec_tmpref(target_thread); -- 2.16.1

7 years, 10 months

1
0
0 0

patch "usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 98112041bcca164676367e261c8c1073ef70cb51 Mon Sep 17 00:00:00 2001 From: Roger Quadros <rogerq(a)ti.com> Date: Mon, 12 Feb 2018 15:30:08 +0200 Subject: usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume In order for ULPI PHYs to work, dwc3_phy_setup() and dwc3_ulpi_init() must be doene before dwc3_core_get_phy(). commit 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys") broke this. The other issue is that dwc3_core_get_phy() and dwc3_ulpi_init() should be called only once during the life cycle of the driver. However, as dwc3_core_init() is called during system suspend/resume it will result in multiple calls to dwc3_core_get_phy() and dwc3_ulpi_init() which is wrong. Fix this by moving dwc3_ulpi_init() out of dwc3_phy_setup() into dwc3_core_ulpi_init(). Use a flag 'ulpi_ready' to ensure that dwc3_core_ulpi_init() is called only once from dwc3_core_init(). Use another flag 'phys_ready' to call dwc3_core_get_phy() only once from dwc3_core_init(). Fixes: 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys") Fixes: f54edb539c11 ("usb: dwc3: core: initialize ULPI before trying to get the PHY") Cc: linux-stable <stable(a)vger.kernel.org> # >= v4.13 Signed-off-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> --- drivers/usb/dwc3/core.c | 47 ++++++++++++++++++++++++++++++++++++----------- drivers/usb/dwc3/core.h | 5 +++++ 2 files changed, 41 insertions(+), 11 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 59511f2cd3ac..f1d838a4acd6 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -486,6 +486,22 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); } +static int dwc3_core_ulpi_init(struct dwc3 *dwc) +{ + int intf; + int ret = 0; + + intf = DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3); + + if (intf == DWC3_GHWPARAMS3_HSPHY_IFC_ULPI || + (intf == DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI && + dwc->hsphy_interface && + !strncmp(dwc->hsphy_interface, "ulpi", 4))) + ret = dwc3_ulpi_init(dwc); + + return ret; +} + /** * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core * @dwc: Pointer to our controller context structure @@ -497,7 +513,6 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) static int dwc3_phy_setup(struct dwc3 *dwc) { u32 reg; - int ret; reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); @@ -568,9 +583,6 @@ static int dwc3_phy_setup(struct dwc3 *dwc) } /* FALLTHROUGH */ case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI: - ret = dwc3_ulpi_init(dwc); - if (ret) - return ret; /* FALLTHROUGH */ default: break; @@ -727,6 +739,7 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) } static int dwc3_core_get_phy(struct dwc3 *dwc); +static int dwc3_core_ulpi_init(struct dwc3 *dwc); /** * dwc3_core_init - Low-level initialization of DWC3 Core @@ -758,17 +771,27 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->maximum_speed = USB_SPEED_HIGH; } - ret = dwc3_core_get_phy(dwc); + ret = dwc3_phy_setup(dwc); if (ret) goto err0; - ret = dwc3_core_soft_reset(dwc); - if (ret) - goto err0; + if (!dwc->ulpi_ready) { + ret = dwc3_core_ulpi_init(dwc); + if (ret) + goto err0; + dwc->ulpi_ready = true; + } - ret = dwc3_phy_setup(dwc); + if (!dwc->phys_ready) { + ret = dwc3_core_get_phy(dwc); + if (ret) + goto err0a; + dwc->phys_ready = true; + } + + ret = dwc3_core_soft_reset(dwc); if (ret) - goto err0; + goto err0a; dwc3_core_setup_global_control(dwc); dwc3_core_num_eps(dwc); @@ -841,6 +864,9 @@ static int dwc3_core_init(struct dwc3 *dwc) phy_exit(dwc->usb2_generic_phy); phy_exit(dwc->usb3_generic_phy); +err0a: + dwc3_ulpi_exit(dwc); + err0: return ret; } @@ -1235,7 +1261,6 @@ static int dwc3_probe(struct platform_device *pdev) err3: dwc3_free_event_buffers(dwc); - dwc3_ulpi_exit(dwc); err2: pm_runtime_allow(&pdev->dev); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 185b9603fd98..860d2bc184d1 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -797,7 +797,9 @@ struct dwc3_scratchpad_array { * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY * @usb3_generic_phy: pointer to USB3 PHY + * @phys_ready: flag to indicate that PHYs are ready * @ulpi: pointer to ulpi interface + * @ulpi_ready: flag to indicate that ULPI is initialized * @u2sel: parameter from Set SEL request. * @u2pel: parameter from Set SEL request. * @u1sel: parameter from Set SEL request. @@ -895,7 +897,10 @@ struct dwc3 { struct phy *usb2_generic_phy; struct phy *usb3_generic_phy; + bool phys_ready; + struct ulpi *ulpi; + bool ulpi_ready; void __iomem *regs; size_t regs_size; -- 2.16.1

7 years, 10 months

1
0
0 0

patch "usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 17aa31f13cad25daa19d3f923323f552e87bc874 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Date: Mon, 5 Feb 2018 17:12:35 +0900 Subject: usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path This fixes an issue that a gadget driver (usb_f_fs) is possible to stop rx transactions after the usb-dmac is used because the following functions missed to set/check the "running" flag. - usbhsf_dma_prepare_pop_with_usb_dmac() - usbhsf_dma_pop_done_with_usb_dmac() So, if next transaction uses pio, the usbhsf_prepare_pop() can not start the transaction because the "running" flag is 0. Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Cc: <stable(a)vger.kernel.org> # v3.19+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> --- drivers/usb/renesas_usbhs/fifo.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 5925d111bd47..39fa2fc1b8b7 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -982,6 +982,10 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1)) goto usbhsf_pio_prepare_pop; + /* return at this time if the pipe is running */ + if (usbhs_pipe_is_running(pipe)) + return 0; + usbhs_pipe_config_change_bfre(pipe, 1); ret = usbhsf_fifo_select(pipe, fifo, 0); @@ -1172,6 +1176,7 @@ static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt, usbhsf_fifo_clear(pipe, fifo); pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len); + usbhs_pipe_running(pipe, 0); usbhsf_dma_stop(pipe, fifo); usbhsf_dma_unmap(pkt); usbhsf_fifo_unselect(pipe, pipe->fifo); -- 2.16.1

7 years, 10 months

1
0
0 0

patch "usb: phy: mxs: Fix NULL pointer dereference on i.MX23/28" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: phy: mxs: Fix NULL pointer dereference on i.MX23/28 to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 499350865387f8b8c40a9e9453a9a7eb3cec5dc4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam <fabio.estevam(a)nxp.com> Date: Thu, 18 Jan 2018 00:22:45 -0200 Subject: usb: phy: mxs: Fix NULL pointer dereference on i.MX23/28 Commit e93650994a95 ("usb: phy: mxs: add usb charger type detection") causes the following kernel hang on i.MX28: [ 2.207973] usbcore: registered new interface driver usb-storage [ 2.235659] Unable to handle kernel NULL pointer dereference at virtual address 00000188 [ 2.244195] pgd = (ptrval) [ 2.246994] [00000188] *pgd=00000000 [ 2.250676] Internal error: Oops: 5 [#1] ARM [ 2.254979] Modules linked in: [ 2.258089] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc8-next-20180117-00002-g75d5f21 #7 [ 2.266724] Hardware name: Freescale MXS (Device Tree) [ 2.271921] PC is at regmap_read+0x0/0x5c [ 2.275977] LR is at mxs_phy_charger_detect+0x34/0x1dc mxs_phy_charger_detect() makes accesses to the anatop registers via regmap, however i.MX23/28 do not have such registers, which causes a NULL pointer dereference. Fix the issue by doing a NULL check on the 'regmap' pointer. Fixes: e93650994a95 ("usb: phy: mxs: add usb charger type detection") Cc: <stable(a)vger.kernel.org> # v4.15 Reviewed-by: Li Jun <jun.li(a)nxp.com> Acked-by: Peter Chen <peter.chen(a)nxp.com> Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> --- drivers/usb/phy/phy-mxs-usb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index da031c45395a..fbec863350f6 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -602,6 +602,9 @@ static enum usb_charger_type mxs_phy_charger_detect(struct usb_phy *phy) void __iomem *base = phy->io_priv; enum usb_charger_type chgr_type = UNKNOWN_TYPE; + if (!regmap) + return UNKNOWN_TYPE; + if (mxs_charger_data_contact_detect(mxs_phy)) return chgr_type; -- 2.16.1

7 years, 10 months

1
0
0 0

[PATCH v2] megaraid_sas: Do not use 32-bit atomic request descriptor for Ventura controllers

by Shivasharan S

Problem Statement: Sending I/O through 32 bit descriptors to Ventura series of controller results in IO timeout on certain conditions. This error only occurs on systems with high I/O activity on Ventura series controllers. Changes in this patch will prevent driver from using 32 bit descriptor and use 64 bit Descriptors. Cc: <stable(a)vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai(a)broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Tomas Henzl <thenzl(a)redhat.com> --- Changes in v2: Removed below text from function description: * Ventura supports 32 bit Descriptor. * Prior to Ventura (12G) MR controller supports 64 bit Descriptor. drivers/scsi/megaraid/megaraid_sas_fusion.c | 42 ++++++++++------------------- 1 file changed, 14 insertions(+), 28 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 073ced07e662..dc8e850fbfd2 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -216,36 +216,30 @@ inline void megasas_return_cmd_fusion(struct megasas_instance *instance, /** * megasas_fire_cmd_fusion - Sends command to the FW * @instance: Adapter soft state - * @req_desc: 32bit or 64bit Request descriptor + * @req_desc: 64bit Request descriptor * - * Perform PCI Write. Ventura supports 32 bit Descriptor. - * Prior to Ventura (12G) MR controller supports 64 bit Descriptor. + * Perform PCI Write. */ static void megasas_fire_cmd_fusion(struct megasas_instance *instance, union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc) { - if (instance->adapter_type == VENTURA_SERIES) - writel(le32_to_cpu(req_desc->u.low), - &instance->reg_set->inbound_single_queue_port); - else { #if defined(writeq) && defined(CONFIG_64BIT) - u64 req_data = (((u64)le32_to_cpu(req_desc->u.high) << 32) | - le32_to_cpu(req_desc->u.low)); + u64 req_data = (((u64)le32_to_cpu(req_desc->u.high) << 32) | + le32_to_cpu(req_desc->u.low)); - writeq(req_data, &instance->reg_set->inbound_low_queue_port); + writeq(req_data, &instance->reg_set->inbound_low_queue_port); #else - unsigned long flags; - spin_lock_irqsave(&instance->hba_lock, flags); - writel(le32_to_cpu(req_desc->u.low), - &instance->reg_set->inbound_low_queue_port); - writel(le32_to_cpu(req_desc->u.high), - &instance->reg_set->inbound_high_queue_port); - mmiowb(); - spin_unlock_irqrestore(&instance->hba_lock, flags); + unsigned long flags; + spin_lock_irqsave(&instance->hba_lock, flags); + writel(le32_to_cpu(req_desc->u.low), + &instance->reg_set->inbound_low_queue_port); + writel(le32_to_cpu(req_desc->u.high), + &instance->reg_set->inbound_high_queue_port); + mmiowb(); + spin_unlock_irqrestore(&instance->hba_lock, flags); #endif - } } /** @@ -982,7 +976,6 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) const char *sys_info; MFI_CAPABILITIES *drv_ops; u32 scratch_pad_2; - unsigned long flags; ktime_t time; bool cur_fw_64bit_dma_capable; @@ -1121,14 +1114,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) break; } - /* For Ventura also IOC INIT required 64 bit Descriptor write. */ - spin_lock_irqsave(&instance->hba_lock, flags); - writel(le32_to_cpu(req_desc.u.low), - &instance->reg_set->inbound_low_queue_port); - writel(le32_to_cpu(req_desc.u.high), - &instance->reg_set->inbound_high_queue_port); - mmiowb(); - spin_unlock_irqrestore(&instance->hba_lock, flags); + megasas_fire_cmd_fusion(instance, &req_desc); wait_and_poll(instance, cmd, MFI_POLL_TIMEOUT_SECS); -- 2.16.1

7 years, 10 months

2
1
0 0

[Linux-stable-mirror] [PATCH] IB/srp: Fix completion vector assignment algorithm

by Bart Van Assche

Ensure that cv_end is equal to ibdev->num_comp_vectors for the NUMA node with the highest index. This patch improves spreading of RDMA channels over completion vectors and thereby improves performance, especially on systems with only a single NUMA node. This patch drops support for the comp_vector login parameter by ignoring the value of that parameter since I have not found a good way to combine support for that parameter and automatic spreading of RDMA channels over completion vectors. Fixes: d92c0da71a35 ("IB/srp: Add multichannel support") Reported-by: Alexander Schmid <alex(a)modula-shop-systems.de> Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Alexander Schmid <alex(a)modula-shop-systems.de> Cc: stable(a)vger.kernel.org --- drivers/infiniband/ulp/srp/ib_srp.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index b48843833d69..241c0e72dce3 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -3871,12 +3871,10 @@ static ssize_t srp_create_target(struct device *dev, num_online_nodes()); const int ch_end = ((node_idx + 1) * target->ch_count / num_online_nodes()); - const int cv_start = (node_idx * ibdev->num_comp_vectors / - num_online_nodes() + target->comp_vector) - % ibdev->num_comp_vectors; - const int cv_end = ((node_idx + 1) * ibdev->num_comp_vectors / - num_online_nodes() + target->comp_vector) - % ibdev->num_comp_vectors; + const int cv_start = node_idx * ibdev->num_comp_vectors / + num_online_nodes(); + const int cv_end = (node_idx + 1) * ibdev->num_comp_vectors / + num_online_nodes(); int cpu_idx = 0; for_each_online_cpu(cpu) { -- 2.16.1

7 years, 10 months

2
1
0 0

[PATCH] linux/nospec.h: allow index argument to have const-qualified type

by Rasmus Villemoes

The last expression in a statement expression need not be a bare variable, quoting gcc docs The last thing in the compound statement should be an expression followed by a semicolon; the value of this subexpression serves as the value of the entire construct. and we already use that in e.g. the min/max macros which end with a ternary expression. This way, we can allow index to have const-qualified type, which will in some cases avoid the need for introducing a local copy of index of non-const qualified type. That, in turn, can prevent readers not familiar with the internals of array_index_nospec from wondering about the seemingly redundant extra variable, and I think that's worthwhile considering how confusing the whole _nospec business is. The expression _i&_mask has type unsigned long (since that is the type of _mask, and the BUILD_BUG_ONs guarantee that _i will get promoted to that), so in order not to change the type of the whole expression, add a cast back to typeof(_i). Cc: stable(a)vger.kernel.org Signed-off-by: Rasmus Villemoes <linux(a)rasmusvillemoes.dk> --- cc stable because if this is ok, there will probably be future users relying on this which also get cc'ed to -stable. include/linux/nospec.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/nospec.h b/include/linux/nospec.h index fbc98e2c8228..132e3f5a2e0d 100644 --- a/include/linux/nospec.h +++ b/include/linux/nospec.h @@ -72,7 +72,6 @@ static inline unsigned long array_index_mask_nospec(unsigned long index, BUILD_BUG_ON(sizeof(_i) > sizeof(long)); \ BUILD_BUG_ON(sizeof(_s) > sizeof(long)); \ \ - _i &= _mask; \ - _i; \ + (typeof(_i)) (_i & _mask); \ }) #endif /* _LINUX_NOSPEC_H */ -- 2.15.1

7 years, 10 months

3
4
0 0

patch "Add delay-init quirk for Corsair K70 RGB keyboards" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Add delay-init quirk for Corsair K70 RGB keyboards to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 7a1646d922577b5b48c0d222e03831141664bb59 Mon Sep 17 00:00:00 2001 From: Jack Stocker <jackstocker.93(a)gmail.com> Date: Thu, 15 Feb 2018 18:24:10 +0000 Subject: Add delay-init quirk for Corsair K70 RGB keyboards Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Device ids found here: usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: Corsair K70 RGB Gaming Keyboard Signed-off-by: Jack Stocker <jackstocker.93(a)gmail.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 4024926c1d68..f4a548471f0f 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -226,6 +226,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Corsair K70 RGB */ + { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Corsair Strafe RGB */ { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT }, -- 2.16.1

7 years, 10 months

1
0
0 0

[PATCH] xfrm: Fix return value check of copy_sec_ctx.

by Dmitry Shmidt

Please add this patch to stable 3.18, 4.4 and 4.9 It exists in 4.14. ---------------------------------------------------------------------------- commit 8598112d04af21cf6c895670e72dcb8a9f58e74f Author: Steffen Klassert <steffen.klassert(a)secunet.com> Date: Thu Aug 31 10:37:00 2017 +0200 xfrm: Fix return value check of copy_sec_ctx. A recent commit added an output_mark. When copying this output_mark, the return value of copy_sec_ctx is overwitten without a check. Fix this by copying the output_mark before the security context. Fixes: 077fbac405bf ("net: xfrm: support setting an output mark.") Signed-off-by: Steffen Klassert <steffen.klassert(a)secunet.com>

7 years, 10 months

2
2
0 0

patch "usb: ohci: Proper handling of ed_rm_list to handle race condition" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: ohci: Proper handling of ed_rm_list to handle race condition to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 46408ea558df13b110e0866b99624384a33bdeba Mon Sep 17 00:00:00 2001 From: AMAN DEEP <aman.deep(a)samsung.com> Date: Thu, 8 Feb 2018 11:55:01 +0800 Subject: usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() There is a race condition between finish_unlinks->finish_urb() function and usb_kill_urb() in ohci controller case. The finish_urb calls spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call, then if during this time, usb_kill_urb is called for another endpoint, then new ed will be added to ed_rm_list at beginning for unlink, and ed_rm_list will point to newly added. When finish_urb() is completed in finish_unlinks() and ed->td_list becomes empty as in below code (in finish_unlinks() function): if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; ed->ed_next = NULL; ed_schedule(ohci, ed); } The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next and previously added ed by usb_kill_urb will be left unreferenced by ed_rm_list. This causes usb_kill_urb() hang forever waiting for finish_unlink to remove added ed from ed_rm_list. The main reason for hang in this race condtion is addition and removal of ed from ed_rm_list in the beginning during usb_kill_urb and later last* is modified in finish_unlinks(). As suggested by Alan Stern, the solution for proper handling of ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing any URBs. Then at the end, we can add ed back to the list if necessary. This properly handle the updated ohci->ed_rm_list in usb_kill_urb(). Fixes: 977dcfdc6031 ("USB: OHCI: don't lose track of EDs when a controller dies") Acked-by: Alan Stern <stern(a)rowland.harvard.edu> CC: <stable(a)vger.kernel.org> Signed-off-by: Aman Deep <aman.deep(a)samsung.com> Signed-off-by: Jeffy Chen <jeffy.chen(a)rock-chips.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/host/ohci-q.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index b2ec8c399363..4ccb85a67bb3 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -1019,6 +1019,8 @@ static void finish_unlinks(struct ohci_hcd *ohci) * have modified this list. normally it's just prepending * entries (which we'd ignore), but paranoia won't hurt. */ + *last = ed->ed_next; + ed->ed_next = NULL; modified = 0; /* unlink urbs as requested, but rescan the list after @@ -1077,21 +1079,22 @@ static void finish_unlinks(struct ohci_hcd *ohci) goto rescan_this; /* - * If no TDs are queued, take ED off the ed_rm_list. + * If no TDs are queued, ED is now idle. * Otherwise, if the HC is running, reschedule. - * If not, leave it on the list for further dequeues. + * If the HC isn't running, add ED back to the + * start of the list for later processing. */ if (list_empty(&ed->td_list)) { - *last = ed->ed_next; - ed->ed_next = NULL; ed->state = ED_IDLE; list_del(&ed->in_use_list); } else if (ohci->rh_state == OHCI_RH_RUNNING) { - *last = ed->ed_next; - ed->ed_next = NULL; ed_schedule(ohci, ed); } else { - last = &ed->ed_next; + ed->ed_next = ohci->ed_rm_list; + ohci->ed_rm_list = ed; + /* Don't loop on the same ED */ + if (last == &ohci->ed_rm_list) + last = &ed->ed_next; } if (modified) -- 2.16.1

7 years, 10 months

1
0
0 0

patch "usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From d6efa938ac366fe8cb92d6157f74d43cc35f1c67 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Date: Mon, 5 Feb 2018 17:12:35 +0900 Subject: usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path This fixes an issue that a gadget driver (usb_f_fs) is possible to stop rx transactions after the usb-dmac is used because the following functions missed to set/check the "running" flag. - usbhsf_dma_prepare_pop_with_usb_dmac() - usbhsf_dma_pop_done_with_usb_dmac() So, if next transaction uses pio, the usbhsf_prepare_pop() can not start the transaction because the "running" flag is 0. Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Cc: <stable(a)vger.kernel.org> # v3.19+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/renesas_usbhs/fifo.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 5925d111bd47..39fa2fc1b8b7 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -982,6 +982,10 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1)) goto usbhsf_pio_prepare_pop; + /* return at this time if the pipe is running */ + if (usbhs_pipe_is_running(pipe)) + return 0; + usbhs_pipe_config_change_bfre(pipe, 1); ret = usbhsf_fifo_select(pipe, fifo, 0); @@ -1172,6 +1176,7 @@ static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt, usbhsf_fifo_clear(pipe, fifo); pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len); + usbhs_pipe_running(pipe, 0); usbhsf_dma_stop(pipe, fifo); usbhsf_dma_unmap(pkt); usbhsf_fifo_unselect(pipe, pipe->fifo); -- 2.16.1

7 years, 10 months

1
0
0 0

patch "usb: ldusb: add PIDs for new CASSY devices supported by this driver" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: ldusb: add PIDs for new CASSY devices supported by this driver to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 52ad2bd8918158266fc88a05f95429b56b6a33c5 Mon Sep 17 00:00:00 2001 From: Karsten Koop <kkoop(a)ld-didactic.de> Date: Fri, 9 Feb 2018 09:12:06 +0000 Subject: usb: ldusb: add PIDs for new CASSY devices supported by this driver This patch adds support for new CASSY devices to the ldusb driver. The PIDs are also added to the ignore list in hid-quirks. Signed-off-by: Karsten Koop <kkoop(a)ld-didactic.de> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-quirks.c | 3 +++ drivers/usb/misc/ldusb.c | 6 ++++++ 3 files changed, 12 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 43ddcdfbd0da..9454ac134ce2 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -645,6 +645,9 @@ #define USB_DEVICE_ID_LD_MICROCASSYTIME 0x1033 #define USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE 0x1035 #define USB_DEVICE_ID_LD_MICROCASSYPH 0x1038 +#define USB_DEVICE_ID_LD_POWERANALYSERCASSY 0x1040 +#define USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY 0x1042 +#define USB_DEVICE_ID_LD_MACHINETESTCASSY 0x1043 #define USB_DEVICE_ID_LD_JWM 0x1080 #define USB_DEVICE_ID_LD_DMMP 0x1081 #define USB_DEVICE_ID_LD_UMIP 0x1090 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 5f6035a5ce36..e92b77fa574a 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -809,6 +809,9 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTIME) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYPH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERANALYSERCASSY) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETESTCASSY) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP) }, diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 63b9e85dc0e9..236a60f53099 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -42,6 +42,9 @@ #define USB_DEVICE_ID_LD_MICROCASSYTIME 0x1033 /* USB Product ID of Micro-CASSY Time (reserved) */ #define USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE 0x1035 /* USB Product ID of Micro-CASSY Temperature */ #define USB_DEVICE_ID_LD_MICROCASSYPH 0x1038 /* USB Product ID of Micro-CASSY pH */ +#define USB_DEVICE_ID_LD_POWERANALYSERCASSY 0x1040 /* USB Product ID of Power Analyser CASSY */ +#define USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY 0x1042 /* USB Product ID of Converter Controller CASSY */ +#define USB_DEVICE_ID_LD_MACHINETESTCASSY 0x1043 /* USB Product ID of Machine Test CASSY */ #define USB_DEVICE_ID_LD_JWM 0x1080 /* USB Product ID of Joule and Wattmeter */ #define USB_DEVICE_ID_LD_DMMP 0x1081 /* USB Product ID of Digital Multimeter P (reserved) */ #define USB_DEVICE_ID_LD_UMIP 0x1090 /* USB Product ID of UMI P */ @@ -84,6 +87,9 @@ static const struct usb_device_id ld_usb_table[] = { { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTIME) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYPH) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERANALYSERCASSY) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETESTCASSY) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP) }, -- 2.16.1

7 years, 10 months

1
0
0 0

patch "usb: host: ehci: use correct device pointer for dma ops" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: host: ehci: use correct device pointer for dma ops to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 02a10f061a3f8bca1b37332672f50a107198adbe Mon Sep 17 00:00:00 2001 From: Peter Chen <hzpeterchen(a)gmail.com> Date: Thu, 1 Feb 2018 12:26:43 +0800 Subject: usb: host: ehci: use correct device pointer for dma ops commit a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus") converted to use hcd->self.sysdev for DMA operations instead of hcd->self.controller, but forgot to do it for hcd test mode. Replace the correct one in this commit. Fixes: a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus") Signed-off-by: Peter Chen <peter.chen(a)nxp.com> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/host/ehci-hub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index facafdf8fb95..d7641cbdee43 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -774,12 +774,12 @@ static struct urb *request_single_step_set_feature_urb( atomic_inc(&urb->use_count); atomic_inc(&urb->dev->urbnum); urb->setup_dma = dma_map_single( - hcd->self.controller, + hcd->self.sysdev, urb->setup_packet, sizeof(struct usb_ctrlrequest), DMA_TO_DEVICE); urb->transfer_dma = dma_map_single( - hcd->self.controller, + hcd->self.sysdev, urb->transfer_buffer, urb->transfer_buffer_length, DMA_FROM_DEVICE); -- 2.16.1

7 years, 10 months

1
0
0 0

patch "ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From b2685bdacdaab065c172b97b55ab46c6be77a037 Mon Sep 17 00:00:00 2001 From: Shigeru Yoshida <shigeru.yoshida(a)windriver.com> Date: Fri, 2 Feb 2018 13:51:39 +0800 Subject: ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func() Running io_watchdog_func() while ohci_urb_enqueue() is running can cause a race condition where ohci->prev_frame_no is corrupted and the watchdog can mis-detect following error: ohci-platform 664a0800.usb: frame counter not updating; disabled ohci-platform 664a0800.usb: HC died; cleaning up Specifically, following scenario causes a race condition: 1. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 2. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 3. ohci_urb_enqueue() sets ohci->prev_frame_no to a frame number read by ohci_frame_no(ohci) 4. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 5. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section 6. Later, ohci_urb_enqueue() is called 7. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 8. The timer scheduled on step 4 expires and io_watchdog_func() runs 9. io_watchdog_func() calls spin_lock_irqsave(&ohci->lock, flags) and waits on it because ohci_urb_enqueue() is already in the critical section on step 7 10. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 11. ohci_urb_enqueue() sets ohci->prev_frame_no to new frame number read by ohci_frame_no(ohci) because the frame number proceeded between step 3 and 6 12. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 13. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section, then wake up io_watchdog_func() which is waiting on step 9 14. io_watchdog_func() enters the critical section 15. io_watchdog_func() calls ohci_frame_no(ohci) and set frame_no variable to the frame number 16. io_watchdog_func() compares frame_no and ohci->prev_frame_no On step 16, because this calling of io_watchdog_func() is scheduled on step 4, the frame number set in ohci->prev_frame_no is expected to the number set on step 3. However, ohci->prev_frame_no is overwritten on step 11. Because step 16 is executed soon after step 11, the frame number might not proceed, so ohci->prev_frame_no must equals to frame_no. To address above scenario, this patch introduces a special sentinel value IO_WATCHDOG_OFF and set this value to ohci->prev_frame_no when the watchdog is not pending or running. When ohci_urb_enqueue() schedules the watchdog (step 4 and 12 above), it compares ohci->prev_frame_no to IO_WATCHDOG_OFF so that ohci->prev_frame_no is not overwritten while io_watchdog_func() is running. Signed-off-by: Shigeru Yoshida <Shigeru.Yoshida(a)windriver.com> Signed-off-by: Haiqing Bai <Haiqing.Bai(a)windriver.com> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/host/ohci-hcd.c | 10 +++++++--- drivers/usb/host/ohci-hub.c | 4 +++- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index ee9676349333..84f88fa411cd 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -74,6 +74,7 @@ static const char hcd_name [] = "ohci_hcd"; #define STATECHANGE_DELAY msecs_to_jiffies(300) #define IO_WATCHDOG_DELAY msecs_to_jiffies(275) +#define IO_WATCHDOG_OFF 0xffffff00 #include "ohci.h" #include "pci-quirks.h" @@ -231,7 +232,7 @@ static int ohci_urb_enqueue ( } /* Start up the I/O watchdog timer, if it's not running */ - if (!timer_pending(&ohci->io_watchdog) && + if (ohci->prev_frame_no == IO_WATCHDOG_OFF && list_empty(&ohci->eds_in_use) && !(ohci->flags & OHCI_QUIRK_QEMU)) { ohci->prev_frame_no = ohci_frame_no(ohci); @@ -501,6 +502,7 @@ static int ohci_init (struct ohci_hcd *ohci) return 0; timer_setup(&ohci->io_watchdog, io_watchdog_func, 0); + ohci->prev_frame_no = IO_WATCHDOG_OFF; ohci->hcca = dma_alloc_coherent (hcd->self.controller, sizeof(*ohci->hcca), &ohci->hcca_dma, GFP_KERNEL); @@ -730,7 +732,7 @@ static void io_watchdog_func(struct timer_list *t) u32 head; struct ed *ed; struct td *td, *td_start, *td_next; - unsigned frame_no; + unsigned frame_no, prev_frame_no = IO_WATCHDOG_OFF; unsigned long flags; spin_lock_irqsave(&ohci->lock, flags); @@ -835,7 +837,7 @@ static void io_watchdog_func(struct timer_list *t) } } if (!list_empty(&ohci->eds_in_use)) { - ohci->prev_frame_no = frame_no; + prev_frame_no = frame_no; ohci->prev_wdh_cnt = ohci->wdh_cnt; ohci->prev_donehead = ohci_readl(ohci, &ohci->regs->donehead); @@ -845,6 +847,7 @@ static void io_watchdog_func(struct timer_list *t) } done: + ohci->prev_frame_no = prev_frame_no; spin_unlock_irqrestore(&ohci->lock, flags); } @@ -973,6 +976,7 @@ static void ohci_stop (struct usb_hcd *hcd) if (quirk_nec(ohci)) flush_work(&ohci->nec_work); del_timer_sync(&ohci->io_watchdog); + ohci->prev_frame_no = IO_WATCHDOG_OFF; ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); ohci_usb_reset(ohci); diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index fb7aaa3b9d06..634f3c7bf774 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -311,8 +311,10 @@ static int ohci_bus_suspend (struct usb_hcd *hcd) rc = ohci_rh_suspend (ohci, 0); spin_unlock_irq (&ohci->lock); - if (rc == 0) + if (rc == 0) { del_timer_sync(&ohci->io_watchdog); + ohci->prev_frame_no = IO_WATCHDOG_OFF; + } return rc; } -- 2.16.1

7 years, 10 months

1
0
0 0

patch "xhci: fix xhci debugfs errors in xhci_stop" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xhci: fix xhci debugfs errors in xhci_stop to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 11cd764dc9a030991880ad4d51db93918afa5822 Mon Sep 17 00:00:00 2001 From: Zhengjun Xing <zhengjun.xing(a)linux.intel.com> Date: Mon, 12 Feb 2018 14:24:51 +0200 Subject: xhci: fix xhci debugfs errors in xhci_stop In function xhci_stop, xhci_debugfs_exit called before xhci_mem_cleanup. xhci_debugfs_exit removed the xhci debugfs root nodes, xhci_mem_cleanup called function xhci_free_virt_devices_depth_first which in turn called function xhci_debugfs_remove_slot. Function xhci_debugfs_remove_slot removed the nodes for devices, the nodes folders are sub folder of xhci debugfs. It is unreasonable to remove xhci debugfs root folder before xhci debugfs sub folder. Function xhci_mem_cleanup should be called before function xhci_debugfs_exit. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: <stable(a)vger.kernel.org> # v4.15 Signed-off-by: Zhengjun Xing <zhengjun.xing(a)linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/host/xhci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 4adb6da0bd38..25d4b748a56f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -646,8 +646,6 @@ static void xhci_stop(struct usb_hcd *hcd) return; } - xhci_debugfs_exit(xhci); - xhci_dbc_exit(xhci); spin_lock_irq(&xhci->lock); @@ -680,6 +678,7 @@ static void xhci_stop(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "cleaning up memory"); xhci_mem_cleanup(xhci); + xhci_debugfs_exit(xhci); xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_stop completed - status = %x", readl(&xhci->op_regs->status)); -- 2.16.1

7 years, 10 months

1
0
0 0

patch "xhci: xhci debugfs device nodes weren't removed after device plugged" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xhci: xhci debugfs device nodes weren't removed after device plugged to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 8c5a93ebf7ac56d47f879b3c7c2f8c83b40c2cdb Mon Sep 17 00:00:00 2001 From: Zhengjun Xing <zhengjun.xing(a)linux.intel.com> Date: Mon, 12 Feb 2018 14:24:50 +0200 Subject: xhci: xhci debugfs device nodes weren't removed after device plugged out There is a bug after plugged out USB device, the device and its ep00 nodes are still kept, we need to remove the nodes in xhci_free_dev when USB device is plugged out. Fixes: 052f71e25a7e ("xhci: Fix xhci debugfs NULL pointer dereference in resume from hibernate") Cc: <stable(a)vger.kernel.org> # v4.15 Signed-off-by: Zhengjun Xing <zhengjun.xing(a)linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/host/xhci.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b01bd643f905..4adb6da0bd38 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3545,12 +3545,10 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) virt_dev->eps[i].ep_state &= ~EP_STOP_CMD_PENDING; del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); } - + xhci_debugfs_remove_slot(xhci, udev->slot_id); ret = xhci_disable_slot(xhci, udev->slot_id); - if (ret) { - xhci_debugfs_remove_slot(xhci, udev->slot_id); + if (ret) xhci_free_virt_device(xhci, udev->slot_id); - } } int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id) -- 2.16.1

7 years, 10 months

1
0
0 0

patch "xhci: Fix NULL pointer in xhci debugfs" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xhci: Fix NULL pointer in xhci debugfs to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From fa2dfd0ec22e0069c84dfae162972cbbc7c75488 Mon Sep 17 00:00:00 2001 From: Zhengjun Xing <zhengjun.xing(a)linux.intel.com> Date: Mon, 12 Feb 2018 14:24:48 +0200 Subject: xhci: Fix NULL pointer in xhci debugfs Commit dde634057da7 ("xhci: Fix use-after-free in xhci debugfs") causes a null pointer dereference while fixing xhci-debugfs usage of ring pointers that were freed during hibernate. The fix passed addresses to ring pointers instead, but forgot to do this change for the xhci_ring_trb_show function. The address of the ring pointer passed to xhci-debugfs was of a temporary ring pointer "new_ring" instead of the actual ring "ring" pointer. The temporary new_ring pointer will be set to NULL later causing the NULL pointer dereference. This issue was seen when reading xhci related files in debugfs: cat /sys/kernel/debug/usb/xhci/*/devices/*/ep*/trbs [ 184.604861] BUG: unable to handle kernel NULL pointer dereference at (null) [ 184.613776] IP: xhci_ring_trb_show+0x3a/0x890 [ 184.618733] PGD 264193067 P4D 264193067 PUD 263238067 PMD 0 [ 184.625184] Oops: 0000 [#1] SMP [ 184.726410] RIP: 0010:xhci_ring_trb_show+0x3a/0x890 [ 184.731944] RSP: 0018:ffffba8243c0fd90 EFLAGS: 00010246 [ 184.737880] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000000295d6 [ 184.746020] RDX: 00000000000295d5 RSI: 0000000000000001 RDI: ffff971a6418d400 [ 184.754121] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 184.762222] R10: ffff971a64c98a80 R11: ffff971a62a00e40 R12: ffff971a62a85500 [ 184.770325] R13: 0000000000020000 R14: ffff971a6418d400 R15: ffff971a6418d400 [ 184.778448] FS: 00007fe725a79700(0000) GS:ffff971a6ec00000(0000) knlGS:0000000000000000 [ 184.787644] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 184.794168] CR2: 0000000000000000 CR3: 000000025f365005 CR4: 00000000003606f0 [ 184.802318] Call Trace: [ 184.805094] ? seq_read+0x281/0x3b0 [ 184.809068] seq_read+0xeb/0x3b0 [ 184.812735] full_proxy_read+0x4d/0x70 [ 184.817007] __vfs_read+0x23/0x120 [ 184.820870] vfs_read+0x91/0x130 [ 184.824538] SyS_read+0x42/0x90 [ 184.828106] entry_SYSCALL_64_fastpath+0x1a/0x7d Fixes: dde634057da7 ("xhci: Fix use-after-free in xhci debugfs") Cc: <stable(a)vger.kernel.org> # v4.15 Signed-off-by: Zhengjun Xing <zhengjun.xing(a)linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/host/xhci-debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index e26e685d8a57..5851052d4668 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -211,7 +211,7 @@ static void xhci_ring_dump_segment(struct seq_file *s, static int xhci_ring_trb_show(struct seq_file *s, void *unused) { int i; - struct xhci_ring *ring = s->private; + struct xhci_ring *ring = *(struct xhci_ring **)s->private; struct xhci_segment *seg = ring->first_seg; for (i = 0; i < ring->num_segs; i++) { @@ -387,7 +387,7 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, snprintf(epriv->name, sizeof(epriv->name), "ep%02d", ep_index); epriv->root = xhci_debugfs_create_ring_dir(xhci, - &dev->eps[ep_index].new_ring, + &dev->eps[ep_index].ring, epriv->name, spriv->root); spriv->eps[ep_index] = epriv; -- 2.16.1

7 years, 10 months

1
0
0 0

patch "xhci: Fix xhci debugfs devices node disappearance after hibernation" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xhci: Fix xhci debugfs devices node disappearance after hibernation to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From d91676717261578f429d3577dbe9154b26e8abf7 Mon Sep 17 00:00:00 2001 From: Zhengjun Xing <zhengjun.xing(a)linux.intel.com> Date: Mon, 12 Feb 2018 14:24:49 +0200 Subject: xhci: Fix xhci debugfs devices node disappearance after hibernation During system resume from hibernation, xhci host is reset, all the nodes in devices folder are removed in xhci_mem_cleanup function. Later nodes in /sys/kernel/debug/usb/xhci/* are created again in function xhci_run, but the nodes already exist, so the nodes still keep the old ones, finally device nodes in xhci debugfs folder /sys/kernel/debug/usb/xhci/*/devices/* are disappeared. This fix removed xhci debugfs nodes before the nodes are re-created, so all the nodes in xhci debugfs can be re-created successfully. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: <stable(a)vger.kernel.org> # v4.15 Signed-off-by: Zhengjun Xing <zhengjun.xing(a)linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/host/xhci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1eeb3396300f..b01bd643f905 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1014,6 +1014,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); + xhci_debugfs_exit(xhci); xhci_dbg(xhci, "xhci_stop completed - status = %x\n", readl(&xhci->op_regs->status)); -- 2.16.1

7 years, 10 months

1
0
0 0

Re: [PATCH 3.18 00/45] 3.18.95-stable review

by Greg Kroah-Hartman

On Thu, Feb 15, 2018 at 03:35:03PM +0000, Harsh Shandilya wrote: > On Thu 15 Feb, 2018, 8:50 PM Greg Kroah-Hartman, <gregkh(a)linuxfoundation.org> > wrote: > > > This is the start of the stable review cycle for the 3.18.95 release. > > There are 45 patches in this series, all will be posted as a response > > to this one. If anyone has any issues with these being applied, please > > let me know. > > > > Responses should be made by Sat Feb 17 14:40:54 UTC 2018. > > Anything received after that time might be too late. > > > > The whole patch series can be found in one patch at: > > > > kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.95-rc1.gz > > or in the git tree and branch at: > > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git > > linux-3.18.y > > and the diffstat can be found below. > > > > thanks, > > > > greg k-h > > > > Builds and boots on the OnePlus 3T, no regressions in general usage or > dmesg. Another peaceful and boring update :P Boring is good, it's what you want with a stable kernel update :) thanks for testing and letting me know. greg k-h

7 years, 10 months

1
0
0 0

Patch "rcu: Export init_rcu_head() and destroy_rcu_head() to GPL modules" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rcu: Export init_rcu_head() and destroy_rcu_head() to GPL modules to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rcu-export-init_rcu_head-and-destroy_rcu_head-to-gpl-modules.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 156baec39732f025dc778e00da95fc10d6e45885 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" <paulmck(a)linux.vnet.ibm.com> Date: Thu, 7 Dec 2017 09:40:38 -0800 Subject: rcu: Export init_rcu_head() and destroy_rcu_head() to GPL modules From: Paul E. McKenney <paulmck(a)linux.vnet.ibm.com> commit 156baec39732f025dc778e00da95fc10d6e45885 upstream. Use of init_rcu_head() and destroy_rcu_head() from modules results in the following build-time error with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y: ERROR: "init_rcu_head" [drivers/scsi/scsi_mod.ko] undefined! ERROR: "destroy_rcu_head" [drivers/scsi/scsi_mod.ko] undefined! This commit therefore adds EXPORT_SYMBOL_GPL() for each to allow them to be used by GPL-licensed kernel modules. Reported-by: Bart Van Assche <Bart.VanAssche(a)wdc.com> Reported-by: Stephen Rothwell <sfr(a)canb.auug.org.au> Signed-off-by: Paul E. McKenney <paulmck(a)linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/rcu/update.c | 2 ++ 1 file changed, 2 insertions(+) --- a/kernel/rcu/update.c +++ b/kernel/rcu/update.c @@ -422,11 +422,13 @@ void init_rcu_head(struct rcu_head *head { debug_object_init(head, &rcuhead_debug_descr); } +EXPORT_SYMBOL_GPL(init_rcu_head); void destroy_rcu_head(struct rcu_head *head) { debug_object_free(head, &rcuhead_debug_descr); } +EXPORT_SYMBOL_GPL(destroy_rcu_head); static bool rcuhead_is_static_object(void *addr) { Patches currently in stable-queue which might be from paulmck(a)linux.vnet.ibm.com are queue-4.15/rcu-export-init_rcu_head-and-destroy_rcu_head-to-gpl-modules.patch

7 years, 10 months

1
0
0 0

Patch "rcu: Export init_rcu_head() and destroy_rcu_head() to GPL modules" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rcu: Export init_rcu_head() and destroy_rcu_head() to GPL modules to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rcu-export-init_rcu_head-and-destroy_rcu_head-to-gpl-modules.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 156baec39732f025dc778e00da95fc10d6e45885 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" <paulmck(a)linux.vnet.ibm.com> Date: Thu, 7 Dec 2017 09:40:38 -0800 Subject: rcu: Export init_rcu_head() and destroy_rcu_head() to GPL modules From: Paul E. McKenney <paulmck(a)linux.vnet.ibm.com> commit 156baec39732f025dc778e00da95fc10d6e45885 upstream. Use of init_rcu_head() and destroy_rcu_head() from modules results in the following build-time error with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y: ERROR: "init_rcu_head" [drivers/scsi/scsi_mod.ko] undefined! ERROR: "destroy_rcu_head" [drivers/scsi/scsi_mod.ko] undefined! This commit therefore adds EXPORT_SYMBOL_GPL() for each to allow them to be used by GPL-licensed kernel modules. Reported-by: Bart Van Assche <Bart.VanAssche(a)wdc.com> Reported-by: Stephen Rothwell <sfr(a)canb.auug.org.au> Signed-off-by: Paul E. McKenney <paulmck(a)linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/rcu/update.c | 2 ++ 1 file changed, 2 insertions(+) --- a/kernel/rcu/update.c +++ b/kernel/rcu/update.c @@ -421,11 +421,13 @@ void init_rcu_head(struct rcu_head *head { debug_object_init(head, &rcuhead_debug_descr); } +EXPORT_SYMBOL_GPL(init_rcu_head); void destroy_rcu_head(struct rcu_head *head) { debug_object_free(head, &rcuhead_debug_descr); } +EXPORT_SYMBOL_GPL(destroy_rcu_head); static bool rcuhead_is_static_object(void *addr) { Patches currently in stable-queue which might be from paulmck(a)linux.vnet.ibm.com are queue-4.14/rcu-export-init_rcu_head-and-destroy_rcu_head-to-gpl-modules.patch

7 years, 10 months

1
0
0 0

FAILED: patch "[PATCH] ovl: take mnt_want_write() for work/index dir setup" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 2ba9d57e65044859f7ff133bcb0a902769bf3bc6 Mon Sep 17 00:00:00 2001 From: Amir Goldstein <amir73il(a)gmail.com> Date: Wed, 3 Jan 2018 18:54:41 +0200 Subject: [PATCH] ovl: take mnt_want_write() for work/index dir setup There are several write operations on upper fs not covered by mnt_want_write(): - test set/remove OPAQUE xattr - test create O_TMPFILE - set ORIGIN xattr in ovl_verify_origin() - cleanup of index entries in ovl_indexdir_cleanup() Some of these go way back, but this patch only applies over the v4.14 re-factoring of ovl_fill_super(). Cc: <stable(a)vger.kernel.org> #v4.14 Signed-off-by: Amir Goldstein <amir73il(a)gmail.com> Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index 1a436fa92a04..3387e6d639a5 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -521,10 +521,6 @@ static struct dentry *ovl_workdir_create(struct ovl_fs *ofs, bool retried = false; bool locked = false; - err = mnt_want_write(mnt); - if (err) - goto out_err; - inode_lock_nested(dir, I_MUTEX_PARENT); locked = true; @@ -589,7 +585,6 @@ static struct dentry *ovl_workdir_create(struct ovl_fs *ofs, goto out_err; } out_unlock: - mnt_drop_write(mnt); if (locked) inode_unlock(dir); @@ -930,12 +925,17 @@ static int ovl_get_upper(struct ovl_fs *ofs, struct path *upperpath) static int ovl_make_workdir(struct ovl_fs *ofs, struct path *workpath) { + struct vfsmount *mnt = ofs->upper_mnt; struct dentry *temp; int err; + err = mnt_want_write(mnt); + if (err) + return err; + ofs->workdir = ovl_workdir_create(ofs, OVL_WORKDIR_NAME, false); if (!ofs->workdir) - return 0; + goto out; /* * Upper should support d_type, else whiteouts are visible. Given @@ -945,7 +945,7 @@ static int ovl_make_workdir(struct ovl_fs *ofs, struct path *workpath) */ err = ovl_check_d_type_supported(workpath); if (err < 0) - return err; + goto out; /* * We allowed this configuration and don't want to break users over @@ -969,6 +969,7 @@ static int ovl_make_workdir(struct ovl_fs *ofs, struct path *workpath) if (err) { ofs->noxattr = true; pr_warn("overlayfs: upper fs does not support xattr.\n"); + err = 0; } else { vfs_removexattr(ofs->workdir, OVL_XATTR_OPAQUE); } @@ -980,7 +981,9 @@ static int ovl_make_workdir(struct ovl_fs *ofs, struct path *workpath) pr_warn("overlayfs: upper fs does not support file handles, falling back to index=off.\n"); } - return 0; +out: + mnt_drop_write(mnt); + return err; } static int ovl_get_workdir(struct ovl_fs *ofs, struct path *upperpath) @@ -1027,8 +1030,13 @@ static int ovl_get_workdir(struct ovl_fs *ofs, struct path *upperpath) static int ovl_get_indexdir(struct ovl_fs *ofs, struct ovl_entry *oe, struct path *upperpath) { + struct vfsmount *mnt = ofs->upper_mnt; int err; + err = mnt_want_write(mnt); + if (err) + return err; + /* Verify lower root is upper root origin */ err = ovl_verify_origin(upperpath->dentry, oe->lowerstack[0].dentry, false, true); @@ -1056,6 +1064,7 @@ static int ovl_get_indexdir(struct ovl_fs *ofs, struct ovl_entry *oe, pr_warn("overlayfs: try deleting index dir or mounting with '-o index=off' to disable inodes index.\n"); out: + mnt_drop_write(mnt); return err; }

7 years, 10 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror