- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "dm: fix race between dm_get_from_kobject() and __dm_destroy()" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dm: fix race between dm_get_from_kobject() and __dm_destroy() to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dm-fix-race-between-dm_get_from_kobject-and-__dm_destroy.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b9a41d21dceadf8104812626ef85dc56ee8a60ed Mon Sep 17 00:00:00 2001 From: Hou Tao <houtao1(a)huawei.com> Date: Wed, 1 Nov 2017 15:42:36 +0800 Subject: dm: fix race between dm_get_from_kobject() and __dm_destroy() From: Hou Tao <houtao1(a)huawei.com> commit b9a41d21dceadf8104812626ef85dc56ee8a60ed upstream. The following BUG_ON was hit when testing repeat creation and removal of DM devices: kernel BUG at drivers/md/dm.c:2919! CPU: 7 PID: 750 Comm: systemd-udevd Not tainted 4.1.44 Call Trace: [<ffffffff81649e8b>] dm_get_from_kobject+0x34/0x3a [<ffffffff81650ef1>] dm_attr_show+0x2b/0x5e [<ffffffff817b46d1>] ? mutex_lock+0x26/0x44 [<ffffffff811df7f5>] sysfs_kf_seq_show+0x83/0xcf [<ffffffff811de257>] kernfs_seq_show+0x23/0x25 [<ffffffff81199118>] seq_read+0x16f/0x325 [<ffffffff811de994>] kernfs_fop_read+0x3a/0x13f [<ffffffff8117b625>] __vfs_read+0x26/0x9d [<ffffffff8130eb59>] ? security_file_permission+0x3c/0x44 [<ffffffff8117bdb8>] ? rw_verify_area+0x83/0xd9 [<ffffffff8117be9d>] vfs_read+0x8f/0xcf [<ffffffff81193e34>] ? __fdget_pos+0x12/0x41 [<ffffffff8117c686>] SyS_read+0x4b/0x76 [<ffffffff817b606e>] system_call_fastpath+0x12/0x71 The bug can be easily triggered, if an extra delay (e.g. 10ms) is added between the test of DMF_FREEING & DMF_DELETING and dm_get() in dm_get_from_kobject(). To fix it, we need to ensure the test of DMF_FREEING & DMF_DELETING and dm_get() are done in an atomic way, so _minor_lock is used. The other callers of dm_get() have also been checked to be OK: some callers invoke dm_get() under _minor_lock, some callers invoke it under _hash_lock, and dm_start_request() invoke it after increasing md->open_count. Signed-off-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Mike Snitzer <snitzer(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/dm.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -3033,11 +3033,15 @@ struct mapped_device *dm_get_from_kobjec md = container_of(kobj, struct mapped_device, kobj_holder.kobj); - if (test_bit(DMF_FREEING, &md->flags) || - dm_deleting_md(md)) - return NULL; - + spin_lock(&_minor_lock); + if (test_bit(DMF_FREEING, &md->flags) || dm_deleting_md(md)) { + md = NULL; + goto out; + } dm_get(md); +out: + spin_unlock(&_minor_lock); + return md; } Patches currently in stable-queue which might be from houtao1(a)huawei.com are queue-3.18/dm-fix-race-between-dm_get_from_kobject-and-__dm_destroy.patch

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] Patch "bcache: only permit to recovery read error when cache device is clean" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bcache: only permit to recovery read error when cache device is clean to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bcache-only-permit-to-recovery-read-error-when-cache-device-is-clean.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From d59b23795933678c9638fd20c942d2b4f3cd6185 Mon Sep 17 00:00:00 2001 From: Coly Li <colyli(a)suse.de> Date: Mon, 30 Oct 2017 14:46:31 -0700 Subject: bcache: only permit to recovery read error when cache device is clean From: Coly Li <colyli(a)suse.de> commit d59b23795933678c9638fd20c942d2b4f3cd6185 upstream. When bcache does read I/Os, for example in writeback or writethrough mode, if a read request on cache device is failed, bcache will try to recovery the request by reading from cached device. If the data on cached device is not synced with cache device, then requester will get a stale data. For critical storage system like database, providing stale data from recovery may result an application level data corruption, which is unacceptible. With this patch, for a failed read request in writeback or writethrough mode, recovery a recoverable read request only happens when cache device is clean. That is to say, all data on cached device is up to update. For other cache modes in bcache, read request will never hit cached_dev_read_error(), they don't need this patch. Please note, because cache mode can be switched arbitrarily in run time, a writethrough mode might be switched from a writeback mode. Therefore checking dc->has_data in writethrough mode still makes sense. Changelog: V4: Fix parens error pointed by Michael Lyle. v3: By response from Kent Oversteet, he thinks recovering stale data is a bug to fix, and option to permit it is unnecessary. So this version the sysfs file is removed. v2: rename sysfs entry from allow_stale_data_on_failure to allow_stale_data_on_failure, and fix the confusing commit log. v1: initial patch posted. [small change to patch comment spelling by mlyle] Signed-off-by: Coly Li <colyli(a)suse.de> Signed-off-by: Michael Lyle <mlyle(a)lyle.org> Reported-by: Arne Wolf <awolf(a)lenovo.com> Reviewed-by: Michael Lyle <mlyle(a)lyle.org> Cc: Kent Overstreet <kent.overstreet(a)gmail.com> Cc: Nix <nix(a)esperi.org.uk> Cc: Kai Krakow <hurikhan77(a)gmail.com> Cc: Eric Wheeler <bcache(a)lists.ewheeler.net> Cc: Junhui Tang <tang.junhui(a)zte.com.cn> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/bcache/request.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) --- a/drivers/md/bcache/request.c +++ b/drivers/md/bcache/request.c @@ -705,8 +705,16 @@ static void cached_dev_read_error(struct { struct search *s = container_of(cl, struct search, cl); struct bio *bio = &s->bio.bio; + struct cached_dev *dc = container_of(s->d, struct cached_dev, disk); - if (s->recoverable) { + /* + * If cache device is dirty (dc->has_dirty is non-zero), then + * recovery a failed read request from cached device may get a + * stale data back. So read failure recovery is only permitted + * when cache device is clean. + */ + if (s->recoverable && + (dc && !atomic_read(&dc->has_dirty))) { /* Retry from the backing device: */ trace_bcache_read_retry(s->orig_bio); Patches currently in stable-queue which might be from colyli(a)suse.de are queue-3.18/bcache-only-permit-to-recovery-read-error-when-cache-device-is-clean.patch queue-3.18/bcache-check-ca-alloc_thread-initialized-before-wake-up-it.patch

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] Patch "bcache: check ca->alloc_thread initialized before wake up it" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bcache: check ca->alloc_thread initialized before wake up it to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bcache-check-ca-alloc_thread-initialized-before-wake-up-it.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 91af8300d9c1d7c6b6a2fd754109e08d4798b8d8 Mon Sep 17 00:00:00 2001 From: Coly Li <colyli(a)suse.de> Date: Fri, 13 Oct 2017 16:35:29 -0700 Subject: bcache: check ca->alloc_thread initialized before wake up it From: Coly Li <colyli(a)suse.de> commit 91af8300d9c1d7c6b6a2fd754109e08d4798b8d8 upstream. In bcache code, sysfs entries are created before all resources get allocated, e.g. allocation thread of a cache set. There is posibility for NULL pointer deference if a resource is accessed but which is not initialized yet. Indeed Jorg Bornschein catches one on cache set allocation thread and gets a kernel oops. The reason for this bug is, when bch_bucket_alloc() is called during cache set registration and attaching, ca->alloc_thread is not properly allocated and initialized yet, call wake_up_process() on ca->alloc_thread triggers NULL pointer deference failure. A simple and fast fix is, before waking up ca->alloc_thread, checking whether it is allocated, and only wake up ca->alloc_thread when it is not NULL. Signed-off-by: Coly Li <colyli(a)suse.de> Reported-by: Jorg Bornschein <jb(a)capsec.org> Cc: Kent Overstreet <kent.overstreet(a)gmail.com> Reviewed-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/bcache/alloc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/md/bcache/alloc.c +++ b/drivers/md/bcache/alloc.c @@ -406,7 +406,8 @@ long bch_bucket_alloc(struct cache *ca, finish_wait(&ca->set->bucket_wait, &w); out: - wake_up_process(ca->alloc_thread); + if (ca->alloc_thread) + wake_up_process(ca->alloc_thread); trace_bcache_alloc(ca, reserve); Patches currently in stable-queue which might be from colyli(a)suse.de are queue-3.18/bcache-only-permit-to-recovery-read-error-when-cache-device-is-clean.patch queue-3.18/bcache-check-ca-alloc_thread-initialized-before-wake-up-it.patch

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] Patch "autofs: don't fail mount for transient error" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled autofs: don't fail mount for transient error to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: autofs-don-t-fail-mount-for-transient-error.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ecc0c469f27765ed1e2b967be0aa17cee1a60b76 Mon Sep 17 00:00:00 2001 From: NeilBrown <neilb(a)suse.com> Date: Fri, 17 Nov 2017 15:29:13 -0800 Subject: autofs: don't fail mount for transient error From: NeilBrown <neilb(a)suse.com> commit ecc0c469f27765ed1e2b967be0aa17cee1a60b76 upstream. Currently if the autofs kernel module gets an error when writing to the pipe which links to the daemon, then it marks the whole moutpoint as catatonic, and it will stop working. It is possible that the error is transient. This can happen if the daemon is slow and more than 16 requests queue up. If a subsequent process tries to queue a request, and is then signalled, the write to the pipe will return -ERESTARTSYS and autofs will take that as total failure. So change the code to assess -ERESTARTSYS and -ENOMEM as transient failures which only abort the current request, not the whole mountpoint. It isn't a crash or a data corruption, but having autofs mountpoints suddenly stop working is rather inconvenient. Ian said: : And given the problems with a half dozen (or so) user space applications : consuming large amounts of CPU under heavy mount and umount activity this : could happen more easily than we expect. Link: http://lkml.kernel.org/r/87y3norvgp.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb(a)suse.com> Acked-by: Ian Kent <raven(a)themaw.net> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/autofs4/waitq.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) --- a/fs/autofs4/waitq.c +++ b/fs/autofs4/waitq.c @@ -87,7 +87,8 @@ static int autofs4_write(struct autofs_s spin_unlock_irqrestore(&current->sighand->siglock, flags); } - return (bytes > 0); + /* if 'wr' returned 0 (impossible) we assume -EIO (safe) */ + return bytes == 0 ? 0 : wr < 0 ? wr : -EIO; } static void autofs4_notify_daemon(struct autofs_sb_info *sbi, @@ -101,6 +102,7 @@ static void autofs4_notify_daemon(struct } pkt; struct file *pipe = NULL; size_t pktsz; + int ret; DPRINTK("wait id = 0x%08lx, name = %.*s, type=%d", (unsigned long) wq->wait_queue_token, wq->name.len, wq->name.name, type); @@ -173,7 +175,18 @@ static void autofs4_notify_daemon(struct mutex_unlock(&sbi->wq_mutex); if (autofs4_write(sbi, pipe, &pkt, pktsz)) + switch (ret = autofs4_write(sbi, pipe, &pkt, pktsz)) { + case 0: + break; + case -ENOMEM: + case -ERESTARTSYS: + /* Just fail this one */ + autofs4_wait_release(sbi, wq->wait_queue_token, ret); + break; + default: autofs4_catatonic_mode(sbi); + break; + } fput(pipe); } Patches currently in stable-queue which might be from neilb(a)suse.com are queue-3.18/autofs-don-t-fail-mount-for-transient-error.patch

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: usb-audio: Fix potential out-of-bound access at parsing SU" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: usb-audio: Fix potential out-of-bound access at parsing SU to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-usb-audio-fix-potential-out-of-bound-access-at-parsing-su.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From f658f17b5e0e339935dca23e77e0f3cad591926b Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Tue, 21 Nov 2017 17:00:32 +0100 Subject: ALSA: usb-audio: Fix potential out-of-bound access at parsing SU From: Takashi Iwai <tiwai(a)suse.de> commit f658f17b5e0e339935dca23e77e0f3cad591926b upstream. The usb-audio driver may trigger an out-of-bound access at parsing a malformed selector unit, as it checks the header length only after evaluating bNrInPins field, which can be already above the given length. Fix it by adding the length check beforehand. Fixes: 99fc86450c43 ("ALSA: usb-mixer: parse descriptors with structs") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/usb/mixer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -2018,7 +2018,8 @@ static int parse_audio_selector_unit(str const struct usbmix_name_map *map; char **namelist; - if (!desc->bNrInPins || desc->bLength < 5 + desc->bNrInPins) { + if (desc->bLength < 5 || !desc->bNrInPins || + desc->bLength < 5 + desc->bNrInPins) { usb_audio_err(state->chip, "invalid SELECTOR UNIT descriptor %d\n", unitid); return -EINVAL; Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-3.18/alsa-usb-audio-fix-potential-zero-division-at-parsing-fu.patch queue-3.18/alsa-timer-remove-kernel-warning-at-compat-ioctl-error-paths.patch queue-3.18/alsa-hda-add-raven-pci-id.patch queue-3.18/alsa-usb-audio-add-sanity-checks-in-v2-clock-parsers.patch queue-3.18/alsa-usb-audio-fix-potential-out-of-bound-access-at-parsing-su.patch queue-3.18/alsa-usb-audio-add-sanity-checks-to-fe-parser.patch

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: usb-audio: Add sanity checks to FE parser" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: usb-audio: Add sanity checks to FE parser to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-usb-audio-add-sanity-checks-to-fe-parser.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From d937cd6790a2bef2d07b500487646bd794c039bb Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Tue, 21 Nov 2017 16:55:51 +0100 Subject: ALSA: usb-audio: Add sanity checks to FE parser From: Takashi Iwai <tiwai(a)suse.de> commit d937cd6790a2bef2d07b500487646bd794c039bb upstream. When the usb-audio descriptor contains the malformed feature unit description with a too short length, the driver may access out-of-bounds. Add a sanity check of the header size at the beginning of parse_audio_feature_unit(). Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by: Andrey Konovalov <andreyknvl(a)google.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/usb/mixer.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1373,6 +1373,12 @@ static int parse_audio_feature_unit(stru __u8 *bmaControls; if (state->mixer->protocol == UAC_VERSION_1) { + if (hdr->bLength < 7) { + usb_audio_err(state->chip, + "unit %u: invalid UAC_FEATURE_UNIT descriptor\n", + unitid); + return -EINVAL; + } csize = hdr->bControlSize; if (!csize) { usb_audio_dbg(state->chip, @@ -1390,6 +1396,12 @@ static int parse_audio_feature_unit(stru } } else { struct uac2_feature_unit_descriptor *ftr = _ftr; + if (hdr->bLength < 6) { + usb_audio_err(state->chip, + "unit %u: invalid UAC_FEATURE_UNIT descriptor\n", + unitid); + return -EINVAL; + } csize = 4; channels = (hdr->bLength - 6) / 4 - 1; bmaControls = ftr->bmaControls; Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-3.18/alsa-usb-audio-fix-potential-zero-division-at-parsing-fu.patch queue-3.18/alsa-timer-remove-kernel-warning-at-compat-ioctl-error-paths.patch queue-3.18/alsa-hda-add-raven-pci-id.patch queue-3.18/alsa-usb-audio-add-sanity-checks-in-v2-clock-parsers.patch queue-3.18/alsa-usb-audio-fix-potential-out-of-bound-access-at-parsing-su.patch queue-3.18/alsa-usb-audio-add-sanity-checks-to-fe-parser.patch

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: usb-audio: Add sanity checks in v2 clock parsers" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: usb-audio: Add sanity checks in v2 clock parsers to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-usb-audio-add-sanity-checks-in-v2-clock-parsers.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 0a62d6c966956d77397c32836a5bbfe3af786fc1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Tue, 21 Nov 2017 17:28:06 +0100 Subject: ALSA: usb-audio: Add sanity checks in v2 clock parsers From: Takashi Iwai <tiwai(a)suse.de> commit 0a62d6c966956d77397c32836a5bbfe3af786fc1 upstream. The helper functions to parse and look for the clock source, selector and multiplier unit may return the descriptor with a too short length than required, while there is no sanity check in the caller side. Add some sanity checks in the parsers, at least, to guarantee the given descriptor size, for avoiding the potential crashes. Fixes: 79f920fbff56 ("ALSA: usb-audio: parse clock topology of UAC2 devices") Reported-by: Andrey Konovalov <andreyknvl(a)google.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/usb/clock.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -43,7 +43,7 @@ static struct uac_clock_source_descripto while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra, ctrl_iface->extralen, cs, UAC2_CLOCK_SOURCE))) { - if (cs->bClockID == clock_id) + if (cs->bLength >= sizeof(*cs) && cs->bClockID == clock_id) return cs; } @@ -59,8 +59,11 @@ static struct uac_clock_selector_descrip while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra, ctrl_iface->extralen, cs, UAC2_CLOCK_SELECTOR))) { - if (cs->bClockID == clock_id) + if (cs->bLength >= sizeof(*cs) && cs->bClockID == clock_id) { + if (cs->bLength < 5 + cs->bNrInPins) + return NULL; return cs; + } } return NULL; @@ -75,7 +78,7 @@ static struct uac_clock_multiplier_descr while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra, ctrl_iface->extralen, cs, UAC2_CLOCK_MULTIPLIER))) { - if (cs->bClockID == clock_id) + if (cs->bLength >= sizeof(*cs) && cs->bClockID == clock_id) return cs; } Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-3.18/alsa-usb-audio-fix-potential-zero-division-at-parsing-fu.patch queue-3.18/alsa-timer-remove-kernel-warning-at-compat-ioctl-error-paths.patch queue-3.18/alsa-hda-add-raven-pci-id.patch queue-3.18/alsa-usb-audio-add-sanity-checks-in-v2-clock-parsers.patch queue-3.18/alsa-usb-audio-fix-potential-out-of-bound-access-at-parsing-su.patch queue-3.18/alsa-usb-audio-add-sanity-checks-to-fe-parser.patch

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: timer: Remove kernel warning at compat ioctl error paths" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: timer: Remove kernel warning at compat ioctl error paths to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-timer-remove-kernel-warning-at-compat-ioctl-error-paths.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 3d4e8303f2c747c8540a0a0126d0151514f6468b Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Tue, 21 Nov 2017 16:36:11 +0100 Subject: ALSA: timer: Remove kernel warning at compat ioctl error paths From: Takashi Iwai <tiwai(a)suse.de> commit 3d4e8303f2c747c8540a0a0126d0151514f6468b upstream. Some timer compat ioctls have NULL checks of timer instance with snd_BUG_ON() that bring up WARN_ON() when the debug option is set. Actually the condition can be met in the normal situation and it's confusing and bad to spew kernel warnings with stack trace there. Let's remove snd_BUG_ON() invocation and replace with the simple checks. Also, correct the error code to EBADFD to follow the native ioctl error handling. Reported-by: syzbot <syzkaller(a)googlegroups.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/core/timer_compat.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- a/sound/core/timer_compat.c +++ b/sound/core/timer_compat.c @@ -40,11 +40,11 @@ static int snd_timer_user_info_compat(st struct snd_timer *t; tu = file->private_data; - if (snd_BUG_ON(!tu->timeri)) - return -ENXIO; + if (!tu->timeri) + return -EBADFD; t = tu->timeri->timer; - if (snd_BUG_ON(!t)) - return -ENXIO; + if (!t) + return -EBADFD; memset(&info, 0, sizeof(info)); info.card = t->card ? t->card->number : -1; if (t->hw.flags & SNDRV_TIMER_HW_SLAVE) @@ -73,8 +73,8 @@ static int snd_timer_user_status_compat( struct snd_timer_status32 status; tu = file->private_data; - if (snd_BUG_ON(!tu->timeri)) - return -ENXIO; + if (!tu->timeri) + return -EBADFD; memset(&status, 0, sizeof(status)); status.tstamp.tv_sec = tu->tstamp.tv_sec; status.tstamp.tv_nsec = tu->tstamp.tv_nsec; Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-3.18/alsa-usb-audio-fix-potential-zero-division-at-parsing-fu.patch queue-3.18/alsa-timer-remove-kernel-warning-at-compat-ioctl-error-paths.patch queue-3.18/alsa-hda-add-raven-pci-id.patch queue-3.18/alsa-usb-audio-add-sanity-checks-in-v2-clock-parsers.patch queue-3.18/alsa-usb-audio-fix-potential-out-of-bound-access-at-parsing-su.patch queue-3.18/alsa-usb-audio-add-sanity-checks-to-fe-parser.patch

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] mtd: nand: Fix writing mtdoops to nand flash." failed to apply to 3.18-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 3.18-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 30863e38ebeb500a31cecee8096fb5002677dd9b Mon Sep 17 00:00:00 2001 From: Brent Taylor <motobud(a)gmail.com> Date: Mon, 30 Oct 2017 22:32:45 -0500 Subject: [PATCH] mtd: nand: Fix writing mtdoops to nand flash. When mtdoops calls mtd_panic_write(), it eventually calls panic_nand_write() in nand_base.c. In order to properly wait for the nand chip to be ready in panic_nand_wait(), the chip must first be selected. When using the atmel nand flash controller, a panic would occur due to a NULL pointer exception. Fixes: 2af7c6539931 ("mtd: Add panic_write for NAND flashes") Cc: <stable(a)vger.kernel.org> Signed-off-by: Brent Taylor <motobud(a)gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 4c867115c53b..e48bf8260f54 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2799,15 +2799,18 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const uint8_t *buf) { struct nand_chip *chip = mtd_to_nand(mtd); + int chipnr = (int)(to >> chip->chip_shift); struct mtd_oob_ops ops; int ret; - /* Wait for the device to get ready */ - panic_nand_wait(mtd, chip, 400); - /* Grab the device */ panic_nand_get_device(chip, mtd, FL_WRITING); + chip->select_chip(mtd, chipnr); + + /* Wait for the device to get ready */ + panic_nand_wait(mtd, chip, 400); + memset(&ops, 0, sizeof(ops)); ops.len = len; ops.datbuf = (uint8_t *)buf;

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] mtd: nand: Fix writing mtdoops to nand flash." failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 30863e38ebeb500a31cecee8096fb5002677dd9b Mon Sep 17 00:00:00 2001 From: Brent Taylor <motobud(a)gmail.com> Date: Mon, 30 Oct 2017 22:32:45 -0500 Subject: [PATCH] mtd: nand: Fix writing mtdoops to nand flash. When mtdoops calls mtd_panic_write(), it eventually calls panic_nand_write() in nand_base.c. In order to properly wait for the nand chip to be ready in panic_nand_wait(), the chip must first be selected. When using the atmel nand flash controller, a panic would occur due to a NULL pointer exception. Fixes: 2af7c6539931 ("mtd: Add panic_write for NAND flashes") Cc: <stable(a)vger.kernel.org> Signed-off-by: Brent Taylor <motobud(a)gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 4c867115c53b..e48bf8260f54 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2799,15 +2799,18 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const uint8_t *buf) { struct nand_chip *chip = mtd_to_nand(mtd); + int chipnr = (int)(to >> chip->chip_shift); struct mtd_oob_ops ops; int ret; - /* Wait for the device to get ready */ - panic_nand_wait(mtd, chip, 400); - /* Grab the device */ panic_nand_get_device(chip, mtd, FL_WRITING); + chip->select_chip(mtd, chipnr); + + /* Wait for the device to get ready */ + panic_nand_wait(mtd, chip, 400); + memset(&ops, 0, sizeof(ops)); ops.len = len; ops.datbuf = (uint8_t *)buf;

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] mtd: nand: omap2: Fix subpage write" failed to apply to 3.18-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 3.18-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 739c64414f01748a36e7d82c8e0611dea94412bd Mon Sep 17 00:00:00 2001 From: Roger Quadros <rogerq(a)ti.com> Date: Fri, 20 Oct 2017 15:16:21 +0300 Subject: [PATCH] mtd: nand: omap2: Fix subpage write Since v4.12, NAND subpage writes were causing a NULL pointer dereference on OMAP platforms (omap2-nand) using OMAP_ECC_BCH4_CODE_HW, OMAP_ECC_BCH8_CODE_HW and OMAP_ECC_BCH16_CODE_HW. This is because for those ECC modes, omap_calculate_ecc_bch() generates ECC bytes for the entire (multi-sector) page and this can overflow the ECC buffer provided by nand_write_subpage_hwecc() as it expects ecc.calculate() to return ECC bytes for just one sector. However, the root cause of the problem is present since v3.9 but was not seen then as NAND buffers were being allocated as one big chunk prior to commit 3deb9979c731 ("mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset"). Fix the issue by providing a OMAP optimized write_subpage() implementation. Fixes: 62116e5171e0 ("mtd: nand: omap2: Support for hardware BCH error correction.") Cc: <stable(a)vger.kernel.org> Signed-off-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index a97c1aeed55e..dad438c4906a 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1133,129 +1133,172 @@ static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2, 0x97, 0x79, 0xe5, 0x24, 0xb5}; /** - * omap_calculate_ecc_bch - Generate bytes of ECC bytes + * _omap_calculate_ecc_bch - Generate ECC bytes for one sector * @mtd: MTD device structure * @dat: The pointer to data on which ecc is computed * @ecc_code: The ecc_code buffer + * @i: The sector number (for a multi sector page) * - * Support calculating of BCH4/8 ecc vectors for the page + * Support calculating of BCH4/8/16 ECC vectors for one sector + * within a page. Sector number is in @i. */ -static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, - const u_char *dat, u_char *ecc_calc) +static int _omap_calculate_ecc_bch(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc, int i) { struct omap_nand_info *info = mtd_to_omap(mtd); int eccbytes = info->nand.ecc.bytes; struct gpmc_nand_regs *gpmc_regs = &info->reg; u8 *ecc_code; - unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4; + unsigned long bch_val1, bch_val2, bch_val3, bch_val4; u32 val; - int i, j; + int j; + + ecc_code = ecc_calc; + switch (info->ecc_opt) { + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + case OMAP_ECC_BCH8_CODE_HW: + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); + bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); + bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); + *ecc_code++ = (bch_val4 & 0xFF); + *ecc_code++ = ((bch_val3 >> 24) & 0xFF); + *ecc_code++ = ((bch_val3 >> 16) & 0xFF); + *ecc_code++ = ((bch_val3 >> 8) & 0xFF); + *ecc_code++ = (bch_val3 & 0xFF); + *ecc_code++ = ((bch_val2 >> 24) & 0xFF); + *ecc_code++ = ((bch_val2 >> 16) & 0xFF); + *ecc_code++ = ((bch_val2 >> 8) & 0xFF); + *ecc_code++ = (bch_val2 & 0xFF); + *ecc_code++ = ((bch_val1 >> 24) & 0xFF); + *ecc_code++ = ((bch_val1 >> 16) & 0xFF); + *ecc_code++ = ((bch_val1 >> 8) & 0xFF); + *ecc_code++ = (bch_val1 & 0xFF); + break; + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + case OMAP_ECC_BCH4_CODE_HW: + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); + *ecc_code++ = ((bch_val2 >> 12) & 0xFF); + *ecc_code++ = ((bch_val2 >> 4) & 0xFF); + *ecc_code++ = ((bch_val2 & 0xF) << 4) | + ((bch_val1 >> 28) & 0xF); + *ecc_code++ = ((bch_val1 >> 20) & 0xFF); + *ecc_code++ = ((bch_val1 >> 12) & 0xFF); + *ecc_code++ = ((bch_val1 >> 4) & 0xFF); + *ecc_code++ = ((bch_val1 & 0xF) << 4); + break; + case OMAP_ECC_BCH16_CODE_HW: + val = readl(gpmc_regs->gpmc_bch_result6[i]); + ecc_code[0] = ((val >> 8) & 0xFF); + ecc_code[1] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result5[i]); + ecc_code[2] = ((val >> 24) & 0xFF); + ecc_code[3] = ((val >> 16) & 0xFF); + ecc_code[4] = ((val >> 8) & 0xFF); + ecc_code[5] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result4[i]); + ecc_code[6] = ((val >> 24) & 0xFF); + ecc_code[7] = ((val >> 16) & 0xFF); + ecc_code[8] = ((val >> 8) & 0xFF); + ecc_code[9] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result3[i]); + ecc_code[10] = ((val >> 24) & 0xFF); + ecc_code[11] = ((val >> 16) & 0xFF); + ecc_code[12] = ((val >> 8) & 0xFF); + ecc_code[13] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result2[i]); + ecc_code[14] = ((val >> 24) & 0xFF); + ecc_code[15] = ((val >> 16) & 0xFF); + ecc_code[16] = ((val >> 8) & 0xFF); + ecc_code[17] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result1[i]); + ecc_code[18] = ((val >> 24) & 0xFF); + ecc_code[19] = ((val >> 16) & 0xFF); + ecc_code[20] = ((val >> 8) & 0xFF); + ecc_code[21] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result0[i]); + ecc_code[22] = ((val >> 24) & 0xFF); + ecc_code[23] = ((val >> 16) & 0xFF); + ecc_code[24] = ((val >> 8) & 0xFF); + ecc_code[25] = ((val >> 0) & 0xFF); + break; + default: + return -EINVAL; + } + + /* ECC scheme specific syndrome customizations */ + switch (info->ecc_opt) { + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + /* Add constant polynomial to remainder, so that + * ECC of blank pages results in 0x0 on reading back + */ + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch4_polynomial[j]; + break; + case OMAP_ECC_BCH4_CODE_HW: + /* Set 8th ECC byte as 0x0 for ROM compatibility */ + ecc_calc[eccbytes - 1] = 0x0; + break; + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + /* Add constant polynomial to remainder, so that + * ECC of blank pages results in 0x0 on reading back + */ + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch8_polynomial[j]; + break; + case OMAP_ECC_BCH8_CODE_HW: + /* Set 14th ECC byte as 0x0 for ROM compatibility */ + ecc_calc[eccbytes - 1] = 0x0; + break; + case OMAP_ECC_BCH16_CODE_HW: + break; + default: + return -EINVAL; + } + + return 0; +} + +/** + * omap_calculate_ecc_bch_sw - ECC generator for sector for SW based correction + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + * + * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used + * when SW based correction is required as ECC is required for one sector + * at a time. + */ +static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc) +{ + return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0); +} + +/** + * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + * + * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go. + */ +static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc) +{ + struct omap_nand_info *info = mtd_to_omap(mtd); + int eccbytes = info->nand.ecc.bytes; + unsigned long nsectors; + int i, ret; nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; for (i = 0; i < nsectors; i++) { - ecc_code = ecc_calc; - switch (info->ecc_opt) { - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: - case OMAP_ECC_BCH8_CODE_HW: - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); - bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); - bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); - *ecc_code++ = (bch_val4 & 0xFF); - *ecc_code++ = ((bch_val3 >> 24) & 0xFF); - *ecc_code++ = ((bch_val3 >> 16) & 0xFF); - *ecc_code++ = ((bch_val3 >> 8) & 0xFF); - *ecc_code++ = (bch_val3 & 0xFF); - *ecc_code++ = ((bch_val2 >> 24) & 0xFF); - *ecc_code++ = ((bch_val2 >> 16) & 0xFF); - *ecc_code++ = ((bch_val2 >> 8) & 0xFF); - *ecc_code++ = (bch_val2 & 0xFF); - *ecc_code++ = ((bch_val1 >> 24) & 0xFF); - *ecc_code++ = ((bch_val1 >> 16) & 0xFF); - *ecc_code++ = ((bch_val1 >> 8) & 0xFF); - *ecc_code++ = (bch_val1 & 0xFF); - break; - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: - case OMAP_ECC_BCH4_CODE_HW: - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); - *ecc_code++ = ((bch_val2 >> 12) & 0xFF); - *ecc_code++ = ((bch_val2 >> 4) & 0xFF); - *ecc_code++ = ((bch_val2 & 0xF) << 4) | - ((bch_val1 >> 28) & 0xF); - *ecc_code++ = ((bch_val1 >> 20) & 0xFF); - *ecc_code++ = ((bch_val1 >> 12) & 0xFF); - *ecc_code++ = ((bch_val1 >> 4) & 0xFF); - *ecc_code++ = ((bch_val1 & 0xF) << 4); - break; - case OMAP_ECC_BCH16_CODE_HW: - val = readl(gpmc_regs->gpmc_bch_result6[i]); - ecc_code[0] = ((val >> 8) & 0xFF); - ecc_code[1] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result5[i]); - ecc_code[2] = ((val >> 24) & 0xFF); - ecc_code[3] = ((val >> 16) & 0xFF); - ecc_code[4] = ((val >> 8) & 0xFF); - ecc_code[5] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result4[i]); - ecc_code[6] = ((val >> 24) & 0xFF); - ecc_code[7] = ((val >> 16) & 0xFF); - ecc_code[8] = ((val >> 8) & 0xFF); - ecc_code[9] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result3[i]); - ecc_code[10] = ((val >> 24) & 0xFF); - ecc_code[11] = ((val >> 16) & 0xFF); - ecc_code[12] = ((val >> 8) & 0xFF); - ecc_code[13] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result2[i]); - ecc_code[14] = ((val >> 24) & 0xFF); - ecc_code[15] = ((val >> 16) & 0xFF); - ecc_code[16] = ((val >> 8) & 0xFF); - ecc_code[17] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result1[i]); - ecc_code[18] = ((val >> 24) & 0xFF); - ecc_code[19] = ((val >> 16) & 0xFF); - ecc_code[20] = ((val >> 8) & 0xFF); - ecc_code[21] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result0[i]); - ecc_code[22] = ((val >> 24) & 0xFF); - ecc_code[23] = ((val >> 16) & 0xFF); - ecc_code[24] = ((val >> 8) & 0xFF); - ecc_code[25] = ((val >> 0) & 0xFF); - break; - default: - return -EINVAL; - } + ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i); + if (ret) + return ret; - /* ECC scheme specific syndrome customizations */ - switch (info->ecc_opt) { - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: - /* Add constant polynomial to remainder, so that - * ECC of blank pages results in 0x0 on reading back */ - for (j = 0; j < eccbytes; j++) - ecc_calc[j] ^= bch4_polynomial[j]; - break; - case OMAP_ECC_BCH4_CODE_HW: - /* Set 8th ECC byte as 0x0 for ROM compatibility */ - ecc_calc[eccbytes - 1] = 0x0; - break; - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: - /* Add constant polynomial to remainder, so that - * ECC of blank pages results in 0x0 on reading back */ - for (j = 0; j < eccbytes; j++) - ecc_calc[j] ^= bch8_polynomial[j]; - break; - case OMAP_ECC_BCH8_CODE_HW: - /* Set 14th ECC byte as 0x0 for ROM compatibility */ - ecc_calc[eccbytes - 1] = 0x0; - break; - case OMAP_ECC_BCH16_CODE_HW: - break; - default: - return -EINVAL; - } - - ecc_calc += eccbytes; + ecc_calc += eccbytes; } return 0; @@ -1496,7 +1539,7 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, chip->write_buf(mtd, buf, mtd->writesize); /* Update ecc vector from GPMC result registers */ - chip->ecc.calculate(mtd, buf, &ecc_calc[0]); + omap_calculate_ecc_bch_multi(mtd, buf, &ecc_calc[0]); ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, chip->ecc.total); @@ -1508,6 +1551,72 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, return 0; } +/** + * omap_write_subpage_bch - BCH hardware ECC based subpage write + * @mtd: mtd info structure + * @chip: nand chip info structure + * @offset: column address of subpage within the page + * @data_len: data length + * @buf: data buffer + * @oob_required: must write chip->oob_poi to OOB + * @page: page number to write + * + * OMAP optimized subpage write method. + */ +static int omap_write_subpage_bch(struct mtd_info *mtd, + struct nand_chip *chip, u32 offset, + u32 data_len, const u8 *buf, + int oob_required, int page) +{ + u8 *ecc_calc = chip->buffers->ecccalc; + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + int ecc_steps = chip->ecc.steps; + u32 start_step = offset / ecc_size; + u32 end_step = (offset + data_len - 1) / ecc_size; + int step, ret = 0; + + /* + * Write entire page at one go as it would be optimal + * as ECC is calculated by hardware. + * ECC is calculated for all subpages but we choose + * only what we want. + */ + + /* Enable GPMC ECC engine */ + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); + + /* Write data */ + chip->write_buf(mtd, buf, mtd->writesize); + + for (step = 0; step < ecc_steps; step++) { + /* mask ECC of un-touched subpages by padding 0xFF */ + if (step < start_step || step > end_step) + memset(ecc_calc, 0xff, ecc_bytes); + else + ret = _omap_calculate_ecc_bch(mtd, buf, ecc_calc, step); + + if (ret) + return ret; + + buf += ecc_size; + ecc_calc += ecc_bytes; + } + + /* copy calculated ECC for whole page to chip->buffer->oob */ + /* this include masked-value(0xFF) for unwritten subpages */ + ecc_calc = chip->buffers->ecccalc; + ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; + + /* write OOB buffer to NAND device */ + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + /** * omap_read_page_bch - BCH ecc based page read function for entire page * @mtd: mtd info structure @@ -1544,7 +1653,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, chip->ecc.total); /* Calculate ecc bytes */ - chip->ecc.calculate(mtd, buf, ecc_calc); + omap_calculate_ecc_bch_multi(mtd, buf, ecc_calc); ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, chip->ecc.total); @@ -2023,7 +2132,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 4; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = nand_bch_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); /* Reserve one byte for the OMAP marker */ oobbytes_per_step = nand_chip->ecc.bytes + 1; @@ -2045,9 +2154,9 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 4; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes; @@ -2066,7 +2175,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 8; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = nand_bch_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); /* Reserve one byte for the OMAP marker */ oobbytes_per_step = nand_chip->ecc.bytes + 1; @@ -2088,9 +2197,9 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 8; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes; @@ -2110,9 +2219,9 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 16; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes;

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] mtd: nand: omap2: Fix subpage write" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 739c64414f01748a36e7d82c8e0611dea94412bd Mon Sep 17 00:00:00 2001 From: Roger Quadros <rogerq(a)ti.com> Date: Fri, 20 Oct 2017 15:16:21 +0300 Subject: [PATCH] mtd: nand: omap2: Fix subpage write Since v4.12, NAND subpage writes were causing a NULL pointer dereference on OMAP platforms (omap2-nand) using OMAP_ECC_BCH4_CODE_HW, OMAP_ECC_BCH8_CODE_HW and OMAP_ECC_BCH16_CODE_HW. This is because for those ECC modes, omap_calculate_ecc_bch() generates ECC bytes for the entire (multi-sector) page and this can overflow the ECC buffer provided by nand_write_subpage_hwecc() as it expects ecc.calculate() to return ECC bytes for just one sector. However, the root cause of the problem is present since v3.9 but was not seen then as NAND buffers were being allocated as one big chunk prior to commit 3deb9979c731 ("mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset"). Fix the issue by providing a OMAP optimized write_subpage() implementation. Fixes: 62116e5171e0 ("mtd: nand: omap2: Support for hardware BCH error correction.") Cc: <stable(a)vger.kernel.org> Signed-off-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index a97c1aeed55e..dad438c4906a 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1133,129 +1133,172 @@ static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2, 0x97, 0x79, 0xe5, 0x24, 0xb5}; /** - * omap_calculate_ecc_bch - Generate bytes of ECC bytes + * _omap_calculate_ecc_bch - Generate ECC bytes for one sector * @mtd: MTD device structure * @dat: The pointer to data on which ecc is computed * @ecc_code: The ecc_code buffer + * @i: The sector number (for a multi sector page) * - * Support calculating of BCH4/8 ecc vectors for the page + * Support calculating of BCH4/8/16 ECC vectors for one sector + * within a page. Sector number is in @i. */ -static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, - const u_char *dat, u_char *ecc_calc) +static int _omap_calculate_ecc_bch(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc, int i) { struct omap_nand_info *info = mtd_to_omap(mtd); int eccbytes = info->nand.ecc.bytes; struct gpmc_nand_regs *gpmc_regs = &info->reg; u8 *ecc_code; - unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4; + unsigned long bch_val1, bch_val2, bch_val3, bch_val4; u32 val; - int i, j; + int j; + + ecc_code = ecc_calc; + switch (info->ecc_opt) { + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + case OMAP_ECC_BCH8_CODE_HW: + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); + bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); + bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); + *ecc_code++ = (bch_val4 & 0xFF); + *ecc_code++ = ((bch_val3 >> 24) & 0xFF); + *ecc_code++ = ((bch_val3 >> 16) & 0xFF); + *ecc_code++ = ((bch_val3 >> 8) & 0xFF); + *ecc_code++ = (bch_val3 & 0xFF); + *ecc_code++ = ((bch_val2 >> 24) & 0xFF); + *ecc_code++ = ((bch_val2 >> 16) & 0xFF); + *ecc_code++ = ((bch_val2 >> 8) & 0xFF); + *ecc_code++ = (bch_val2 & 0xFF); + *ecc_code++ = ((bch_val1 >> 24) & 0xFF); + *ecc_code++ = ((bch_val1 >> 16) & 0xFF); + *ecc_code++ = ((bch_val1 >> 8) & 0xFF); + *ecc_code++ = (bch_val1 & 0xFF); + break; + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + case OMAP_ECC_BCH4_CODE_HW: + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); + *ecc_code++ = ((bch_val2 >> 12) & 0xFF); + *ecc_code++ = ((bch_val2 >> 4) & 0xFF); + *ecc_code++ = ((bch_val2 & 0xF) << 4) | + ((bch_val1 >> 28) & 0xF); + *ecc_code++ = ((bch_val1 >> 20) & 0xFF); + *ecc_code++ = ((bch_val1 >> 12) & 0xFF); + *ecc_code++ = ((bch_val1 >> 4) & 0xFF); + *ecc_code++ = ((bch_val1 & 0xF) << 4); + break; + case OMAP_ECC_BCH16_CODE_HW: + val = readl(gpmc_regs->gpmc_bch_result6[i]); + ecc_code[0] = ((val >> 8) & 0xFF); + ecc_code[1] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result5[i]); + ecc_code[2] = ((val >> 24) & 0xFF); + ecc_code[3] = ((val >> 16) & 0xFF); + ecc_code[4] = ((val >> 8) & 0xFF); + ecc_code[5] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result4[i]); + ecc_code[6] = ((val >> 24) & 0xFF); + ecc_code[7] = ((val >> 16) & 0xFF); + ecc_code[8] = ((val >> 8) & 0xFF); + ecc_code[9] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result3[i]); + ecc_code[10] = ((val >> 24) & 0xFF); + ecc_code[11] = ((val >> 16) & 0xFF); + ecc_code[12] = ((val >> 8) & 0xFF); + ecc_code[13] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result2[i]); + ecc_code[14] = ((val >> 24) & 0xFF); + ecc_code[15] = ((val >> 16) & 0xFF); + ecc_code[16] = ((val >> 8) & 0xFF); + ecc_code[17] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result1[i]); + ecc_code[18] = ((val >> 24) & 0xFF); + ecc_code[19] = ((val >> 16) & 0xFF); + ecc_code[20] = ((val >> 8) & 0xFF); + ecc_code[21] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result0[i]); + ecc_code[22] = ((val >> 24) & 0xFF); + ecc_code[23] = ((val >> 16) & 0xFF); + ecc_code[24] = ((val >> 8) & 0xFF); + ecc_code[25] = ((val >> 0) & 0xFF); + break; + default: + return -EINVAL; + } + + /* ECC scheme specific syndrome customizations */ + switch (info->ecc_opt) { + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + /* Add constant polynomial to remainder, so that + * ECC of blank pages results in 0x0 on reading back + */ + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch4_polynomial[j]; + break; + case OMAP_ECC_BCH4_CODE_HW: + /* Set 8th ECC byte as 0x0 for ROM compatibility */ + ecc_calc[eccbytes - 1] = 0x0; + break; + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + /* Add constant polynomial to remainder, so that + * ECC of blank pages results in 0x0 on reading back + */ + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch8_polynomial[j]; + break; + case OMAP_ECC_BCH8_CODE_HW: + /* Set 14th ECC byte as 0x0 for ROM compatibility */ + ecc_calc[eccbytes - 1] = 0x0; + break; + case OMAP_ECC_BCH16_CODE_HW: + break; + default: + return -EINVAL; + } + + return 0; +} + +/** + * omap_calculate_ecc_bch_sw - ECC generator for sector for SW based correction + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + * + * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used + * when SW based correction is required as ECC is required for one sector + * at a time. + */ +static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc) +{ + return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0); +} + +/** + * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + * + * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go. + */ +static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc) +{ + struct omap_nand_info *info = mtd_to_omap(mtd); + int eccbytes = info->nand.ecc.bytes; + unsigned long nsectors; + int i, ret; nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; for (i = 0; i < nsectors; i++) { - ecc_code = ecc_calc; - switch (info->ecc_opt) { - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: - case OMAP_ECC_BCH8_CODE_HW: - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); - bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); - bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); - *ecc_code++ = (bch_val4 & 0xFF); - *ecc_code++ = ((bch_val3 >> 24) & 0xFF); - *ecc_code++ = ((bch_val3 >> 16) & 0xFF); - *ecc_code++ = ((bch_val3 >> 8) & 0xFF); - *ecc_code++ = (bch_val3 & 0xFF); - *ecc_code++ = ((bch_val2 >> 24) & 0xFF); - *ecc_code++ = ((bch_val2 >> 16) & 0xFF); - *ecc_code++ = ((bch_val2 >> 8) & 0xFF); - *ecc_code++ = (bch_val2 & 0xFF); - *ecc_code++ = ((bch_val1 >> 24) & 0xFF); - *ecc_code++ = ((bch_val1 >> 16) & 0xFF); - *ecc_code++ = ((bch_val1 >> 8) & 0xFF); - *ecc_code++ = (bch_val1 & 0xFF); - break; - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: - case OMAP_ECC_BCH4_CODE_HW: - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); - *ecc_code++ = ((bch_val2 >> 12) & 0xFF); - *ecc_code++ = ((bch_val2 >> 4) & 0xFF); - *ecc_code++ = ((bch_val2 & 0xF) << 4) | - ((bch_val1 >> 28) & 0xF); - *ecc_code++ = ((bch_val1 >> 20) & 0xFF); - *ecc_code++ = ((bch_val1 >> 12) & 0xFF); - *ecc_code++ = ((bch_val1 >> 4) & 0xFF); - *ecc_code++ = ((bch_val1 & 0xF) << 4); - break; - case OMAP_ECC_BCH16_CODE_HW: - val = readl(gpmc_regs->gpmc_bch_result6[i]); - ecc_code[0] = ((val >> 8) & 0xFF); - ecc_code[1] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result5[i]); - ecc_code[2] = ((val >> 24) & 0xFF); - ecc_code[3] = ((val >> 16) & 0xFF); - ecc_code[4] = ((val >> 8) & 0xFF); - ecc_code[5] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result4[i]); - ecc_code[6] = ((val >> 24) & 0xFF); - ecc_code[7] = ((val >> 16) & 0xFF); - ecc_code[8] = ((val >> 8) & 0xFF); - ecc_code[9] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result3[i]); - ecc_code[10] = ((val >> 24) & 0xFF); - ecc_code[11] = ((val >> 16) & 0xFF); - ecc_code[12] = ((val >> 8) & 0xFF); - ecc_code[13] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result2[i]); - ecc_code[14] = ((val >> 24) & 0xFF); - ecc_code[15] = ((val >> 16) & 0xFF); - ecc_code[16] = ((val >> 8) & 0xFF); - ecc_code[17] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result1[i]); - ecc_code[18] = ((val >> 24) & 0xFF); - ecc_code[19] = ((val >> 16) & 0xFF); - ecc_code[20] = ((val >> 8) & 0xFF); - ecc_code[21] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result0[i]); - ecc_code[22] = ((val >> 24) & 0xFF); - ecc_code[23] = ((val >> 16) & 0xFF); - ecc_code[24] = ((val >> 8) & 0xFF); - ecc_code[25] = ((val >> 0) & 0xFF); - break; - default: - return -EINVAL; - } + ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i); + if (ret) + return ret; - /* ECC scheme specific syndrome customizations */ - switch (info->ecc_opt) { - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: - /* Add constant polynomial to remainder, so that - * ECC of blank pages results in 0x0 on reading back */ - for (j = 0; j < eccbytes; j++) - ecc_calc[j] ^= bch4_polynomial[j]; - break; - case OMAP_ECC_BCH4_CODE_HW: - /* Set 8th ECC byte as 0x0 for ROM compatibility */ - ecc_calc[eccbytes - 1] = 0x0; - break; - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: - /* Add constant polynomial to remainder, so that - * ECC of blank pages results in 0x0 on reading back */ - for (j = 0; j < eccbytes; j++) - ecc_calc[j] ^= bch8_polynomial[j]; - break; - case OMAP_ECC_BCH8_CODE_HW: - /* Set 14th ECC byte as 0x0 for ROM compatibility */ - ecc_calc[eccbytes - 1] = 0x0; - break; - case OMAP_ECC_BCH16_CODE_HW: - break; - default: - return -EINVAL; - } - - ecc_calc += eccbytes; + ecc_calc += eccbytes; } return 0; @@ -1496,7 +1539,7 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, chip->write_buf(mtd, buf, mtd->writesize); /* Update ecc vector from GPMC result registers */ - chip->ecc.calculate(mtd, buf, &ecc_calc[0]); + omap_calculate_ecc_bch_multi(mtd, buf, &ecc_calc[0]); ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, chip->ecc.total); @@ -1508,6 +1551,72 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, return 0; } +/** + * omap_write_subpage_bch - BCH hardware ECC based subpage write + * @mtd: mtd info structure + * @chip: nand chip info structure + * @offset: column address of subpage within the page + * @data_len: data length + * @buf: data buffer + * @oob_required: must write chip->oob_poi to OOB + * @page: page number to write + * + * OMAP optimized subpage write method. + */ +static int omap_write_subpage_bch(struct mtd_info *mtd, + struct nand_chip *chip, u32 offset, + u32 data_len, const u8 *buf, + int oob_required, int page) +{ + u8 *ecc_calc = chip->buffers->ecccalc; + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + int ecc_steps = chip->ecc.steps; + u32 start_step = offset / ecc_size; + u32 end_step = (offset + data_len - 1) / ecc_size; + int step, ret = 0; + + /* + * Write entire page at one go as it would be optimal + * as ECC is calculated by hardware. + * ECC is calculated for all subpages but we choose + * only what we want. + */ + + /* Enable GPMC ECC engine */ + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); + + /* Write data */ + chip->write_buf(mtd, buf, mtd->writesize); + + for (step = 0; step < ecc_steps; step++) { + /* mask ECC of un-touched subpages by padding 0xFF */ + if (step < start_step || step > end_step) + memset(ecc_calc, 0xff, ecc_bytes); + else + ret = _omap_calculate_ecc_bch(mtd, buf, ecc_calc, step); + + if (ret) + return ret; + + buf += ecc_size; + ecc_calc += ecc_bytes; + } + + /* copy calculated ECC for whole page to chip->buffer->oob */ + /* this include masked-value(0xFF) for unwritten subpages */ + ecc_calc = chip->buffers->ecccalc; + ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; + + /* write OOB buffer to NAND device */ + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + /** * omap_read_page_bch - BCH ecc based page read function for entire page * @mtd: mtd info structure @@ -1544,7 +1653,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, chip->ecc.total); /* Calculate ecc bytes */ - chip->ecc.calculate(mtd, buf, ecc_calc); + omap_calculate_ecc_bch_multi(mtd, buf, ecc_calc); ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, chip->ecc.total); @@ -2023,7 +2132,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 4; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = nand_bch_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); /* Reserve one byte for the OMAP marker */ oobbytes_per_step = nand_chip->ecc.bytes + 1; @@ -2045,9 +2154,9 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 4; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes; @@ -2066,7 +2175,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 8; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = nand_bch_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); /* Reserve one byte for the OMAP marker */ oobbytes_per_step = nand_chip->ecc.bytes + 1; @@ -2088,9 +2197,9 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 8; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes; @@ -2110,9 +2219,9 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.strength = 16; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes;

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] [PATCH v2 04/18] drm/sun4i: Fix error path handling

by Maxime Ripard

The commit 4c7f16d14a33 ("drm/sun4i: Fix TCON clock and regmap initialization sequence") moved a bunch of logic around, but forgot to update the gotos after the introduction of the err_free_dotclock label. It means that if we fail later that the one introduced in that commit, we'll just to the old label which isn't free the clock we created. This will result in a breakage as soon as someone tries to do something with that clock, since its resources will have been long reclaimed. Cc: <stable(a)vger.kernel.org> Fixes: 4c7f16d14a33 ("drm/sun4i: Fix TCON clock and regmap initialization sequence") Signed-off-by: Maxime Ripard <maxime.ripard(a)free-electrons.com> --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index e122f5b2a395..f4284b51bdca 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -724,12 +724,12 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, if (IS_ERR(tcon->crtc)) { dev_err(dev, "Couldn't create our CRTC\n"); ret = PTR_ERR(tcon->crtc); - goto err_free_clocks; + goto err_free_dotclock; } ret = sun4i_rgb_init(drm, tcon); if (ret < 0) - goto err_free_clocks; + goto err_free_dotclock; if (tcon->quirks->needs_de_be_mux) { /* -- git-series 0.9.1

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] target: Avoid early CMD_T_PRE_EXECUTE failures during" failed to apply to 3.18-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 3.18-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1c21a48055a67ceb693e9c2587824a8de60a217c Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger <nab(a)linux-iscsi.org> Date: Fri, 27 Oct 2017 22:19:26 -0800 Subject: [PATCH] target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK This patch fixes bug where early se_cmd exceptions that occur before backend execution can result in use-after-free if/when a subsequent ABORT_TASK occurs for the same tag. Since an early se_cmd exception will have had se_cmd added to se_session->sess_cmd_list via target_get_sess_cmd(), it will not have CMD_T_COMPLETE set by the usual target_complete_cmd() backend completion path. This causes a subsequent ABORT_TASK + __target_check_io_state() to signal ABORT_TASK should proceed. As core_tmr_abort_task() executes, it will bring the outstanding se_cmd->cmd_kref count down to zero releasing se_cmd, after se_cmd has already been queued with error status into fabric driver response path code. To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is set at target_get_sess_cmd() time, and cleared immediately before backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE is set. Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to determine when an early exception has occured, and avoid aborting this se_cmd since it will have already been queued into fabric driver response path code. Reported-by: Donald White <dew(a)datera.io> Cc: Donald White <dew(a)datera.io> Cc: Mike Christie <mchristi(a)redhat.com> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org # 3.14+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 61909b23e959..9c7bc1ca341a 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -133,6 +133,15 @@ static bool __target_check_io_state(struct se_cmd *se_cmd, spin_unlock(&se_cmd->t_state_lock); return false; } + if (se_cmd->transport_state & CMD_T_PRE_EXECUTE) { + if (se_cmd->scsi_status) { + pr_debug("Attempted to abort io tag: %llu early failure" + " status: 0x%02x\n", se_cmd->tag, + se_cmd->scsi_status); + spin_unlock(&se_cmd->t_state_lock); + return false; + } + } if (sess->sess_tearing_down || se_cmd->cmd_wait_set) { pr_debug("Attempted to abort io tag: %llu already shutdown," " skipping\n", se_cmd->tag); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 0e89db84b200..58caacd54a3b 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1975,6 +1975,7 @@ void target_execute_cmd(struct se_cmd *cmd) } cmd->t_state = TRANSPORT_PROCESSING; + cmd->transport_state &= ~CMD_T_PRE_EXECUTE; cmd->transport_state |= CMD_T_ACTIVE | CMD_T_SENT; spin_unlock_irq(&cmd->t_state_lock); @@ -2667,6 +2668,7 @@ int target_get_sess_cmd(struct se_cmd *se_cmd, bool ack_kref) ret = -ESHUTDOWN; goto out; } + se_cmd->transport_state |= CMD_T_PRE_EXECUTE; list_add_tail(&se_cmd->se_cmd_list, &se_sess->sess_cmd_list); out: spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index d3139a95ea77..ccf501b8359c 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -490,6 +490,7 @@ struct se_cmd { #define CMD_T_STOP (1 << 5) #define CMD_T_TAS (1 << 10) #define CMD_T_FABRIC_STOP (1 << 11) +#define CMD_T_PRE_EXECUTE (1 << 12) spinlock_t t_state_lock; struct kref cmd_kref; struct completion t_transport_stop_comp;

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] target: Avoid early CMD_T_PRE_EXECUTE failures during" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1c21a48055a67ceb693e9c2587824a8de60a217c Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger <nab(a)linux-iscsi.org> Date: Fri, 27 Oct 2017 22:19:26 -0800 Subject: [PATCH] target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK This patch fixes bug where early se_cmd exceptions that occur before backend execution can result in use-after-free if/when a subsequent ABORT_TASK occurs for the same tag. Since an early se_cmd exception will have had se_cmd added to se_session->sess_cmd_list via target_get_sess_cmd(), it will not have CMD_T_COMPLETE set by the usual target_complete_cmd() backend completion path. This causes a subsequent ABORT_TASK + __target_check_io_state() to signal ABORT_TASK should proceed. As core_tmr_abort_task() executes, it will bring the outstanding se_cmd->cmd_kref count down to zero releasing se_cmd, after se_cmd has already been queued with error status into fabric driver response path code. To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is set at target_get_sess_cmd() time, and cleared immediately before backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE is set. Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to determine when an early exception has occured, and avoid aborting this se_cmd since it will have already been queued into fabric driver response path code. Reported-by: Donald White <dew(a)datera.io> Cc: Donald White <dew(a)datera.io> Cc: Mike Christie <mchristi(a)redhat.com> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org # 3.14+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 61909b23e959..9c7bc1ca341a 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -133,6 +133,15 @@ static bool __target_check_io_state(struct se_cmd *se_cmd, spin_unlock(&se_cmd->t_state_lock); return false; } + if (se_cmd->transport_state & CMD_T_PRE_EXECUTE) { + if (se_cmd->scsi_status) { + pr_debug("Attempted to abort io tag: %llu early failure" + " status: 0x%02x\n", se_cmd->tag, + se_cmd->scsi_status); + spin_unlock(&se_cmd->t_state_lock); + return false; + } + } if (sess->sess_tearing_down || se_cmd->cmd_wait_set) { pr_debug("Attempted to abort io tag: %llu already shutdown," " skipping\n", se_cmd->tag); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 0e89db84b200..58caacd54a3b 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1975,6 +1975,7 @@ void target_execute_cmd(struct se_cmd *cmd) } cmd->t_state = TRANSPORT_PROCESSING; + cmd->transport_state &= ~CMD_T_PRE_EXECUTE; cmd->transport_state |= CMD_T_ACTIVE | CMD_T_SENT; spin_unlock_irq(&cmd->t_state_lock); @@ -2667,6 +2668,7 @@ int target_get_sess_cmd(struct se_cmd *se_cmd, bool ack_kref) ret = -ESHUTDOWN; goto out; } + se_cmd->transport_state |= CMD_T_PRE_EXECUTE; list_add_tail(&se_cmd->se_cmd_list, &se_sess->sess_cmd_list); out: spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index d3139a95ea77..ccf501b8359c 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -490,6 +490,7 @@ struct se_cmd { #define CMD_T_STOP (1 << 5) #define CMD_T_TAS (1 << 10) #define CMD_T_FABRIC_STOP (1 << 11) +#define CMD_T_PRE_EXECUTE (1 << 12) spinlock_t t_state_lock; struct kref cmd_kref; struct completion t_transport_stop_comp;

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] target: Avoid early CMD_T_PRE_EXECUTE failures during" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1c21a48055a67ceb693e9c2587824a8de60a217c Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger <nab(a)linux-iscsi.org> Date: Fri, 27 Oct 2017 22:19:26 -0800 Subject: [PATCH] target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK This patch fixes bug where early se_cmd exceptions that occur before backend execution can result in use-after-free if/when a subsequent ABORT_TASK occurs for the same tag. Since an early se_cmd exception will have had se_cmd added to se_session->sess_cmd_list via target_get_sess_cmd(), it will not have CMD_T_COMPLETE set by the usual target_complete_cmd() backend completion path. This causes a subsequent ABORT_TASK + __target_check_io_state() to signal ABORT_TASK should proceed. As core_tmr_abort_task() executes, it will bring the outstanding se_cmd->cmd_kref count down to zero releasing se_cmd, after se_cmd has already been queued with error status into fabric driver response path code. To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is set at target_get_sess_cmd() time, and cleared immediately before backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE is set. Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to determine when an early exception has occured, and avoid aborting this se_cmd since it will have already been queued into fabric driver response path code. Reported-by: Donald White <dew(a)datera.io> Cc: Donald White <dew(a)datera.io> Cc: Mike Christie <mchristi(a)redhat.com> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org # 3.14+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 61909b23e959..9c7bc1ca341a 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -133,6 +133,15 @@ static bool __target_check_io_state(struct se_cmd *se_cmd, spin_unlock(&se_cmd->t_state_lock); return false; } + if (se_cmd->transport_state & CMD_T_PRE_EXECUTE) { + if (se_cmd->scsi_status) { + pr_debug("Attempted to abort io tag: %llu early failure" + " status: 0x%02x\n", se_cmd->tag, + se_cmd->scsi_status); + spin_unlock(&se_cmd->t_state_lock); + return false; + } + } if (sess->sess_tearing_down || se_cmd->cmd_wait_set) { pr_debug("Attempted to abort io tag: %llu already shutdown," " skipping\n", se_cmd->tag); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 0e89db84b200..58caacd54a3b 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1975,6 +1975,7 @@ void target_execute_cmd(struct se_cmd *cmd) } cmd->t_state = TRANSPORT_PROCESSING; + cmd->transport_state &= ~CMD_T_PRE_EXECUTE; cmd->transport_state |= CMD_T_ACTIVE | CMD_T_SENT; spin_unlock_irq(&cmd->t_state_lock); @@ -2667,6 +2668,7 @@ int target_get_sess_cmd(struct se_cmd *se_cmd, bool ack_kref) ret = -ESHUTDOWN; goto out; } + se_cmd->transport_state |= CMD_T_PRE_EXECUTE; list_add_tail(&se_cmd->se_cmd_list, &se_sess->sess_cmd_list); out: spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index d3139a95ea77..ccf501b8359c 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -490,6 +490,7 @@ struct se_cmd { #define CMD_T_STOP (1 << 5) #define CMD_T_TAS (1 << 10) #define CMD_T_FABRIC_STOP (1 << 11) +#define CMD_T_PRE_EXECUTE (1 << 12) spinlock_t t_state_lock; struct kref cmd_kref; struct completion t_transport_stop_comp;

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref" failed to apply to 3.18-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 3.18-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ae072726f6109bb1c94841d6fb3a82dde298ea85 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger <nab(a)linux-iscsi.org> Date: Fri, 27 Oct 2017 12:32:59 -0700 Subject: [PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref Since commit 59b6986dbf fixed a potential NULL pointer dereference by allocating a se_tmr_req for ISCSI_TM_FUNC_TASK_REASSIGN, the se_tmr_req is currently leaked by iscsit_free_cmd() because no iscsi_cmd->se_cmd.se_tfo was associated. To address this, treat ISCSI_TM_FUNC_TASK_REASSIGN like any other TMR and call transport_init_se_cmd() + target_get_sess_cmd() to setup iscsi_cmd->se_cmd.se_tfo with se_cmd->cmd_kref of 2. This will ensure normal release operation once se_cmd->cmd_kref reaches zero and target_release_cmd_kref() is invoked, se_tmr_req will be released via existing target_free_cmd_mem() and core_tmr_release_req() code. Reported-by: Donald White <dew(a)datera.io> Cc: Donald White <dew(a)datera.io> Cc: Mike Christie <mchristi(a)redhat.com> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 541f66a875fc..048d4227327c 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1955,7 +1955,6 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, struct iscsi_tmr_req *tmr_req; struct iscsi_tm *hdr; int out_of_order_cmdsn = 0, ret; - bool sess_ref = false; u8 function, tcm_function = TMR_UNKNOWN; hdr = (struct iscsi_tm *) buf; @@ -1988,22 +1987,23 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, cmd->data_direction = DMA_NONE; cmd->tmr_req = kzalloc(sizeof(*cmd->tmr_req), GFP_KERNEL); - if (!cmd->tmr_req) + if (!cmd->tmr_req) { return iscsit_add_reject_cmd(cmd, ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf); + } + + transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, + conn->sess->se_sess, 0, DMA_NONE, + TCM_SIMPLE_TAG, cmd->sense_buffer + 2); + + target_get_sess_cmd(&cmd->se_cmd, true); /* * TASK_REASSIGN for ERL=2 / connection stays inside of * LIO-Target $FABRIC_MOD */ if (function != ISCSI_TM_FUNC_TASK_REASSIGN) { - transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, - conn->sess->se_sess, 0, DMA_NONE, - TCM_SIMPLE_TAG, cmd->sense_buffer + 2); - - target_get_sess_cmd(&cmd->se_cmd, true); - sess_ref = true; tcm_function = iscsit_convert_tmf(function); if (tcm_function == TMR_UNKNOWN) { pr_err("Unknown iSCSI TMR Function:" @@ -2119,12 +2119,8 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, * For connection recovery, this is also the default action for * TMR TASK_REASSIGN. */ - if (sess_ref) { - pr_debug("Handle TMR, using sess_ref=true check\n"); - target_put_sess_cmd(&cmd->se_cmd); - } - iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state); + target_put_sess_cmd(&cmd->se_cmd); return 0; } EXPORT_SYMBOL(iscsit_handle_task_mgt_cmd);

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ae072726f6109bb1c94841d6fb3a82dde298ea85 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger <nab(a)linux-iscsi.org> Date: Fri, 27 Oct 2017 12:32:59 -0700 Subject: [PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref Since commit 59b6986dbf fixed a potential NULL pointer dereference by allocating a se_tmr_req for ISCSI_TM_FUNC_TASK_REASSIGN, the se_tmr_req is currently leaked by iscsit_free_cmd() because no iscsi_cmd->se_cmd.se_tfo was associated. To address this, treat ISCSI_TM_FUNC_TASK_REASSIGN like any other TMR and call transport_init_se_cmd() + target_get_sess_cmd() to setup iscsi_cmd->se_cmd.se_tfo with se_cmd->cmd_kref of 2. This will ensure normal release operation once se_cmd->cmd_kref reaches zero and target_release_cmd_kref() is invoked, se_tmr_req will be released via existing target_free_cmd_mem() and core_tmr_release_req() code. Reported-by: Donald White <dew(a)datera.io> Cc: Donald White <dew(a)datera.io> Cc: Mike Christie <mchristi(a)redhat.com> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 541f66a875fc..048d4227327c 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1955,7 +1955,6 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, struct iscsi_tmr_req *tmr_req; struct iscsi_tm *hdr; int out_of_order_cmdsn = 0, ret; - bool sess_ref = false; u8 function, tcm_function = TMR_UNKNOWN; hdr = (struct iscsi_tm *) buf; @@ -1988,22 +1987,23 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, cmd->data_direction = DMA_NONE; cmd->tmr_req = kzalloc(sizeof(*cmd->tmr_req), GFP_KERNEL); - if (!cmd->tmr_req) + if (!cmd->tmr_req) { return iscsit_add_reject_cmd(cmd, ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf); + } + + transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, + conn->sess->se_sess, 0, DMA_NONE, + TCM_SIMPLE_TAG, cmd->sense_buffer + 2); + + target_get_sess_cmd(&cmd->se_cmd, true); /* * TASK_REASSIGN for ERL=2 / connection stays inside of * LIO-Target $FABRIC_MOD */ if (function != ISCSI_TM_FUNC_TASK_REASSIGN) { - transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, - conn->sess->se_sess, 0, DMA_NONE, - TCM_SIMPLE_TAG, cmd->sense_buffer + 2); - - target_get_sess_cmd(&cmd->se_cmd, true); - sess_ref = true; tcm_function = iscsit_convert_tmf(function); if (tcm_function == TMR_UNKNOWN) { pr_err("Unknown iSCSI TMR Function:" @@ -2119,12 +2119,8 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, * For connection recovery, this is also the default action for * TMR TASK_REASSIGN. */ - if (sess_ref) { - pr_debug("Handle TMR, using sess_ref=true check\n"); - target_put_sess_cmd(&cmd->se_cmd); - } - iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state); + target_put_sess_cmd(&cmd->se_cmd); return 0; } EXPORT_SYMBOL(iscsit_handle_task_mgt_cmd);

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ae072726f6109bb1c94841d6fb3a82dde298ea85 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger <nab(a)linux-iscsi.org> Date: Fri, 27 Oct 2017 12:32:59 -0700 Subject: [PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref Since commit 59b6986dbf fixed a potential NULL pointer dereference by allocating a se_tmr_req for ISCSI_TM_FUNC_TASK_REASSIGN, the se_tmr_req is currently leaked by iscsit_free_cmd() because no iscsi_cmd->se_cmd.se_tfo was associated. To address this, treat ISCSI_TM_FUNC_TASK_REASSIGN like any other TMR and call transport_init_se_cmd() + target_get_sess_cmd() to setup iscsi_cmd->se_cmd.se_tfo with se_cmd->cmd_kref of 2. This will ensure normal release operation once se_cmd->cmd_kref reaches zero and target_release_cmd_kref() is invoked, se_tmr_req will be released via existing target_free_cmd_mem() and core_tmr_release_req() code. Reported-by: Donald White <dew(a)datera.io> Cc: Donald White <dew(a)datera.io> Cc: Mike Christie <mchristi(a)redhat.com> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 541f66a875fc..048d4227327c 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1955,7 +1955,6 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, struct iscsi_tmr_req *tmr_req; struct iscsi_tm *hdr; int out_of_order_cmdsn = 0, ret; - bool sess_ref = false; u8 function, tcm_function = TMR_UNKNOWN; hdr = (struct iscsi_tm *) buf; @@ -1988,22 +1987,23 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, cmd->data_direction = DMA_NONE; cmd->tmr_req = kzalloc(sizeof(*cmd->tmr_req), GFP_KERNEL); - if (!cmd->tmr_req) + if (!cmd->tmr_req) { return iscsit_add_reject_cmd(cmd, ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf); + } + + transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, + conn->sess->se_sess, 0, DMA_NONE, + TCM_SIMPLE_TAG, cmd->sense_buffer + 2); + + target_get_sess_cmd(&cmd->se_cmd, true); /* * TASK_REASSIGN for ERL=2 / connection stays inside of * LIO-Target $FABRIC_MOD */ if (function != ISCSI_TM_FUNC_TASK_REASSIGN) { - transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, - conn->sess->se_sess, 0, DMA_NONE, - TCM_SIMPLE_TAG, cmd->sense_buffer + 2); - - target_get_sess_cmd(&cmd->se_cmd, true); - sess_ref = true; tcm_function = iscsit_convert_tmf(function); if (tcm_function == TMR_UNKNOWN) { pr_err("Unknown iSCSI TMR Function:" @@ -2119,12 +2119,8 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, * For connection recovery, this is also the default action for * TMR TASK_REASSIGN. */ - if (sess_ref) { - pr_debug("Handle TMR, using sess_ref=true check\n"); - target_put_sess_cmd(&cmd->se_cmd); - } - iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state); + target_put_sess_cmd(&cmd->se_cmd); return 0; } EXPORT_SYMBOL(iscsit_handle_task_mgt_cmd);

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b9637d14dc00d91cef0068cde1f9a8959b051028 Mon Sep 17 00:00:00 2001 From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Date: Thu, 19 Oct 2017 02:49:01 -0700 Subject: [PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k Older firmware version unconditionally pulls 4k frame for IOC INIT MFA frame. But driver allocates 1k or 4k max_chain_frame_sz based on FW capability. During boot time, this results in DMA read errors. Workaround fix in driver by allocating separate ioc_init frame of 4k size to support older firmware. Signed-off-by: Kashyap Desai <kashyap.desai(a)broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Cc: stable(a)vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 277fd16305ee..857bdbb0f79d 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -780,13 +780,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ioc_init_handle = fusion->ioc_init_request_phys; IOCInitMessage = fusion->ioc_init_request; - cmd = megasas_get_cmd(instance); - - if (!cmd) { - dev_err(&instance->pdev->dev, "Could not allocate cmd for INIT Frame\n"); - ret = 1; - goto fail_get_cmd; - } + cmd = fusion->ioc_init_cmd; scratch_pad_2 = readl (&instance->reg_set->outbound_scratch_pad_2); @@ -918,8 +912,6 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ret = 0; fail_fw_init: - megasas_return_cmd(instance, cmd); -fail_get_cmd: dev_err(&instance->pdev->dev, "Init cmd return status %s for SCSI host %d\n", ret ? "FAILED" : "SUCCESS", instance->host->host_no); @@ -1333,6 +1325,56 @@ static inline int megasas_allocate_raid_maps(struct megasas_instance *instance) return -ENOMEM; } +static int megasas_alloc_ioc_init_frame(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + struct megasas_cmd *cmd; + + fusion = instance->ctrl_context; + + cmd = kmalloc(sizeof(struct megasas_cmd), GFP_KERNEL); + + if (!cmd) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + return -ENOMEM; + } + + cmd->frame = dma_alloc_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + &cmd->frame_phys_addr, GFP_KERNEL); + + if (!cmd->frame) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + kfree(cmd); + return -ENOMEM; + } + + fusion->ioc_init_cmd = cmd; + return 0; +} + +/** + * megasas_free_ioc_init_cmd - Free IOC INIT command frame + * @instance: Adapter soft state + */ +static inline void megasas_free_ioc_init_cmd(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + + fusion = instance->ctrl_context; + + if (fusion->ioc_init_cmd && fusion->ioc_init_cmd->frame) + dma_free_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + fusion->ioc_init_cmd->frame, + fusion->ioc_init_cmd->frame_phys_addr); + + if (fusion->ioc_init_cmd) + kfree(fusion->ioc_init_cmd); +} + /** * megasas_init_adapter_fusion - Initializes the FW * @instance: Adapter soft state @@ -1428,6 +1470,9 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) MEGASAS_FUSION_IOCTL_CMDS); sema_init(&instance->ioctl_sem, MEGASAS_FUSION_IOCTL_CMDS); + if (megasas_alloc_ioc_init_frame(instance)) + return 1; + /* * Allocate memory for descriptors * Create a pool of commands @@ -1465,6 +1510,7 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) fail_alloc_cmds: megasas_free_cmds(instance); fail_alloc_mfi_cmds: + megasas_free_ioc_init_cmd(instance); return 1; } @@ -3383,6 +3429,7 @@ megasas_issue_dcmd_fusion(struct megasas_instance *instance, void megasas_release_fusion(struct megasas_instance *instance) { + megasas_free_ioc_init_cmd(instance); megasas_free_cmds(instance); megasas_free_cmds_fusion(instance); diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index 5b3f1dba1ab2..549f86b2e871 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -103,6 +103,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { #define THRESHOLD_REPLY_COUNT 50 #define RAID_1_PEER_CMDS 2 #define JBOD_MAPS_COUNT 2 +#define IOC_INIT_FRAME_SIZE 4096 /* * Raid Context structure which describes MegaRAID specific IO Parameters @@ -1317,6 +1318,7 @@ struct fusion_context { struct LD_STREAM_DETECT **stream_detect_by_ld; dma_addr_t ioc_init_request_phys; struct MPI2_IOC_INIT_REQUEST *ioc_init_request; + struct megasas_cmd *ioc_init_cmd; };

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b9637d14dc00d91cef0068cde1f9a8959b051028 Mon Sep 17 00:00:00 2001 From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Date: Thu, 19 Oct 2017 02:49:01 -0700 Subject: [PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k Older firmware version unconditionally pulls 4k frame for IOC INIT MFA frame. But driver allocates 1k or 4k max_chain_frame_sz based on FW capability. During boot time, this results in DMA read errors. Workaround fix in driver by allocating separate ioc_init frame of 4k size to support older firmware. Signed-off-by: Kashyap Desai <kashyap.desai(a)broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Cc: stable(a)vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 277fd16305ee..857bdbb0f79d 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -780,13 +780,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ioc_init_handle = fusion->ioc_init_request_phys; IOCInitMessage = fusion->ioc_init_request; - cmd = megasas_get_cmd(instance); - - if (!cmd) { - dev_err(&instance->pdev->dev, "Could not allocate cmd for INIT Frame\n"); - ret = 1; - goto fail_get_cmd; - } + cmd = fusion->ioc_init_cmd; scratch_pad_2 = readl (&instance->reg_set->outbound_scratch_pad_2); @@ -918,8 +912,6 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ret = 0; fail_fw_init: - megasas_return_cmd(instance, cmd); -fail_get_cmd: dev_err(&instance->pdev->dev, "Init cmd return status %s for SCSI host %d\n", ret ? "FAILED" : "SUCCESS", instance->host->host_no); @@ -1333,6 +1325,56 @@ static inline int megasas_allocate_raid_maps(struct megasas_instance *instance) return -ENOMEM; } +static int megasas_alloc_ioc_init_frame(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + struct megasas_cmd *cmd; + + fusion = instance->ctrl_context; + + cmd = kmalloc(sizeof(struct megasas_cmd), GFP_KERNEL); + + if (!cmd) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + return -ENOMEM; + } + + cmd->frame = dma_alloc_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + &cmd->frame_phys_addr, GFP_KERNEL); + + if (!cmd->frame) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + kfree(cmd); + return -ENOMEM; + } + + fusion->ioc_init_cmd = cmd; + return 0; +} + +/** + * megasas_free_ioc_init_cmd - Free IOC INIT command frame + * @instance: Adapter soft state + */ +static inline void megasas_free_ioc_init_cmd(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + + fusion = instance->ctrl_context; + + if (fusion->ioc_init_cmd && fusion->ioc_init_cmd->frame) + dma_free_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + fusion->ioc_init_cmd->frame, + fusion->ioc_init_cmd->frame_phys_addr); + + if (fusion->ioc_init_cmd) + kfree(fusion->ioc_init_cmd); +} + /** * megasas_init_adapter_fusion - Initializes the FW * @instance: Adapter soft state @@ -1428,6 +1470,9 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) MEGASAS_FUSION_IOCTL_CMDS); sema_init(&instance->ioctl_sem, MEGASAS_FUSION_IOCTL_CMDS); + if (megasas_alloc_ioc_init_frame(instance)) + return 1; + /* * Allocate memory for descriptors * Create a pool of commands @@ -1465,6 +1510,7 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) fail_alloc_cmds: megasas_free_cmds(instance); fail_alloc_mfi_cmds: + megasas_free_ioc_init_cmd(instance); return 1; } @@ -3383,6 +3429,7 @@ megasas_issue_dcmd_fusion(struct megasas_instance *instance, void megasas_release_fusion(struct megasas_instance *instance) { + megasas_free_ioc_init_cmd(instance); megasas_free_cmds(instance); megasas_free_cmds_fusion(instance); diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index 5b3f1dba1ab2..549f86b2e871 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -103,6 +103,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { #define THRESHOLD_REPLY_COUNT 50 #define RAID_1_PEER_CMDS 2 #define JBOD_MAPS_COUNT 2 +#define IOC_INIT_FRAME_SIZE 4096 /* * Raid Context structure which describes MegaRAID specific IO Parameters @@ -1317,6 +1318,7 @@ struct fusion_context { struct LD_STREAM_DETECT **stream_detect_by_ld; dma_addr_t ioc_init_request_phys; struct MPI2_IOC_INIT_REQUEST *ioc_init_request; + struct megasas_cmd *ioc_init_cmd; };

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b9637d14dc00d91cef0068cde1f9a8959b051028 Mon Sep 17 00:00:00 2001 From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Date: Thu, 19 Oct 2017 02:49:01 -0700 Subject: [PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k Older firmware version unconditionally pulls 4k frame for IOC INIT MFA frame. But driver allocates 1k or 4k max_chain_frame_sz based on FW capability. During boot time, this results in DMA read errors. Workaround fix in driver by allocating separate ioc_init frame of 4k size to support older firmware. Signed-off-by: Kashyap Desai <kashyap.desai(a)broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Cc: stable(a)vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 277fd16305ee..857bdbb0f79d 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -780,13 +780,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ioc_init_handle = fusion->ioc_init_request_phys; IOCInitMessage = fusion->ioc_init_request; - cmd = megasas_get_cmd(instance); - - if (!cmd) { - dev_err(&instance->pdev->dev, "Could not allocate cmd for INIT Frame\n"); - ret = 1; - goto fail_get_cmd; - } + cmd = fusion->ioc_init_cmd; scratch_pad_2 = readl (&instance->reg_set->outbound_scratch_pad_2); @@ -918,8 +912,6 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ret = 0; fail_fw_init: - megasas_return_cmd(instance, cmd); -fail_get_cmd: dev_err(&instance->pdev->dev, "Init cmd return status %s for SCSI host %d\n", ret ? "FAILED" : "SUCCESS", instance->host->host_no); @@ -1333,6 +1325,56 @@ static inline int megasas_allocate_raid_maps(struct megasas_instance *instance) return -ENOMEM; } +static int megasas_alloc_ioc_init_frame(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + struct megasas_cmd *cmd; + + fusion = instance->ctrl_context; + + cmd = kmalloc(sizeof(struct megasas_cmd), GFP_KERNEL); + + if (!cmd) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + return -ENOMEM; + } + + cmd->frame = dma_alloc_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + &cmd->frame_phys_addr, GFP_KERNEL); + + if (!cmd->frame) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + kfree(cmd); + return -ENOMEM; + } + + fusion->ioc_init_cmd = cmd; + return 0; +} + +/** + * megasas_free_ioc_init_cmd - Free IOC INIT command frame + * @instance: Adapter soft state + */ +static inline void megasas_free_ioc_init_cmd(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + + fusion = instance->ctrl_context; + + if (fusion->ioc_init_cmd && fusion->ioc_init_cmd->frame) + dma_free_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + fusion->ioc_init_cmd->frame, + fusion->ioc_init_cmd->frame_phys_addr); + + if (fusion->ioc_init_cmd) + kfree(fusion->ioc_init_cmd); +} + /** * megasas_init_adapter_fusion - Initializes the FW * @instance: Adapter soft state @@ -1428,6 +1470,9 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) MEGASAS_FUSION_IOCTL_CMDS); sema_init(&instance->ioctl_sem, MEGASAS_FUSION_IOCTL_CMDS); + if (megasas_alloc_ioc_init_frame(instance)) + return 1; + /* * Allocate memory for descriptors * Create a pool of commands @@ -1465,6 +1510,7 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) fail_alloc_cmds: megasas_free_cmds(instance); fail_alloc_mfi_cmds: + megasas_free_ioc_init_cmd(instance); return 1; } @@ -3383,6 +3429,7 @@ megasas_issue_dcmd_fusion(struct megasas_instance *instance, void megasas_release_fusion(struct megasas_instance *instance) { + megasas_free_ioc_init_cmd(instance); megasas_free_cmds(instance); megasas_free_cmds_fusion(instance); diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index 5b3f1dba1ab2..549f86b2e871 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -103,6 +103,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { #define THRESHOLD_REPLY_COUNT 50 #define RAID_1_PEER_CMDS 2 #define JBOD_MAPS_COUNT 2 +#define IOC_INIT_FRAME_SIZE 4096 /* * Raid Context structure which describes MegaRAID specific IO Parameters @@ -1317,6 +1318,7 @@ struct fusion_context { struct LD_STREAM_DETECT **stream_detect_by_ld; dma_addr_t ioc_init_request_phys; struct MPI2_IOC_INIT_REQUEST *ioc_init_request; + struct megasas_cmd *ioc_init_cmd; };

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] net/9p: Switch to wait_event_killable()" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 9523feac272ccad2ad8186ba4fcc89103754de52 Mon Sep 17 00:00:00 2001 From: Tuomas Tynkkynen <tuomas(a)tuxera.com> Date: Wed, 6 Sep 2017 17:59:08 +0300 Subject: [PATCH] net/9p: Switch to wait_event_killable() Because userspace gets Very Unhappy when calls like stat() and execve() return -EINTR on 9p filesystem mounts. For instance, when bash is looking in PATH for things to execute and some SIGCHLD interrupts stat(), bash can throw a spurious 'command not found' since it doesn't retry the stat(). In practice, hitting the problem is rare and needs a really slow/bogged down 9p server. Cc: stable(a)vger.kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas(a)tuxera.com> Signed-off-by: Al Viro <viro(a)zeniv.linux.org.uk> diff --git a/net/9p/client.c b/net/9p/client.c index 4674235b0d9b..1beb131dd3e1 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -773,8 +773,7 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...) } again: /* Wait for the response */ - err = wait_event_interruptible(*req->wq, - req->status >= REQ_STATUS_RCVD); + err = wait_event_killable(*req->wq, req->status >= REQ_STATUS_RCVD); /* * Make sure our req is coherent with regard to updates in other diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index f24b25c25106..f3a4efcf1456 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -286,8 +286,8 @@ p9_virtio_request(struct p9_client *client, struct p9_req_t *req) if (err == -ENOSPC) { chan->ring_bufs_avail = 0; spin_unlock_irqrestore(&chan->lock, flags); - err = wait_event_interruptible(*chan->vc_wq, - chan->ring_bufs_avail); + err = wait_event_killable(*chan->vc_wq, + chan->ring_bufs_avail); if (err == -ERESTARTSYS) return err; @@ -327,7 +327,7 @@ static int p9_get_mapped_pages(struct virtio_chan *chan, * Other zc request to finish here */ if (atomic_read(&vp_pinned) >= chan->p9_max_pages) { - err = wait_event_interruptible(vp_wq, + err = wait_event_killable(vp_wq, (atomic_read(&vp_pinned) < chan->p9_max_pages)); if (err == -ERESTARTSYS) return err; @@ -471,8 +471,8 @@ p9_virtio_zc_request(struct p9_client *client, struct p9_req_t *req, if (err == -ENOSPC) { chan->ring_bufs_avail = 0; spin_unlock_irqrestore(&chan->lock, flags); - err = wait_event_interruptible(*chan->vc_wq, - chan->ring_bufs_avail); + err = wait_event_killable(*chan->vc_wq, + chan->ring_bufs_avail); if (err == -ERESTARTSYS) goto err_out; @@ -489,8 +489,7 @@ p9_virtio_zc_request(struct p9_client *client, struct p9_req_t *req, virtqueue_kick(chan->vq); spin_unlock_irqrestore(&chan->lock, flags); p9_debug(P9_DEBUG_TRANS, "virtio request kicked\n"); - err = wait_event_interruptible(*req->wq, - req->status >= REQ_STATUS_RCVD); + err = wait_event_killable(*req->wq, req->status >= REQ_STATUS_RCVD); /* * Non kernel buffers are pinned, unpin them */ diff --git a/net/9p/trans_xen.c b/net/9p/trans_xen.c index 6ad3e043c617..325c56043007 100644 --- a/net/9p/trans_xen.c +++ b/net/9p/trans_xen.c @@ -156,8 +156,8 @@ static int p9_xen_request(struct p9_client *client, struct p9_req_t *p9_req) ring = &priv->rings[num]; again: - while (wait_event_interruptible(ring->wq, - p9_xen_write_todo(ring, size)) != 0) + while (wait_event_killable(ring->wq, + p9_xen_write_todo(ring, size)) != 0) ; spin_lock_irqsave(&ring->lock, flags);

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] net/9p: Switch to wait_event_killable()" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 9523feac272ccad2ad8186ba4fcc89103754de52 Mon Sep 17 00:00:00 2001 From: Tuomas Tynkkynen <tuomas(a)tuxera.com> Date: Wed, 6 Sep 2017 17:59:08 +0300 Subject: [PATCH] net/9p: Switch to wait_event_killable() Because userspace gets Very Unhappy when calls like stat() and execve() return -EINTR on 9p filesystem mounts. For instance, when bash is looking in PATH for things to execute and some SIGCHLD interrupts stat(), bash can throw a spurious 'command not found' since it doesn't retry the stat(). In practice, hitting the problem is rare and needs a really slow/bogged down 9p server. Cc: stable(a)vger.kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas(a)tuxera.com> Signed-off-by: Al Viro <viro(a)zeniv.linux.org.uk> diff --git a/net/9p/client.c b/net/9p/client.c index 4674235b0d9b..1beb131dd3e1 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -773,8 +773,7 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...) } again: /* Wait for the response */ - err = wait_event_interruptible(*req->wq, - req->status >= REQ_STATUS_RCVD); + err = wait_event_killable(*req->wq, req->status >= REQ_STATUS_RCVD); /* * Make sure our req is coherent with regard to updates in other diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index f24b25c25106..f3a4efcf1456 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -286,8 +286,8 @@ p9_virtio_request(struct p9_client *client, struct p9_req_t *req) if (err == -ENOSPC) { chan->ring_bufs_avail = 0; spin_unlock_irqrestore(&chan->lock, flags); - err = wait_event_interruptible(*chan->vc_wq, - chan->ring_bufs_avail); + err = wait_event_killable(*chan->vc_wq, + chan->ring_bufs_avail); if (err == -ERESTARTSYS) return err; @@ -327,7 +327,7 @@ static int p9_get_mapped_pages(struct virtio_chan *chan, * Other zc request to finish here */ if (atomic_read(&vp_pinned) >= chan->p9_max_pages) { - err = wait_event_interruptible(vp_wq, + err = wait_event_killable(vp_wq, (atomic_read(&vp_pinned) < chan->p9_max_pages)); if (err == -ERESTARTSYS) return err; @@ -471,8 +471,8 @@ p9_virtio_zc_request(struct p9_client *client, struct p9_req_t *req, if (err == -ENOSPC) { chan->ring_bufs_avail = 0; spin_unlock_irqrestore(&chan->lock, flags); - err = wait_event_interruptible(*chan->vc_wq, - chan->ring_bufs_avail); + err = wait_event_killable(*chan->vc_wq, + chan->ring_bufs_avail); if (err == -ERESTARTSYS) goto err_out; @@ -489,8 +489,7 @@ p9_virtio_zc_request(struct p9_client *client, struct p9_req_t *req, virtqueue_kick(chan->vq); spin_unlock_irqrestore(&chan->lock, flags); p9_debug(P9_DEBUG_TRANS, "virtio request kicked\n"); - err = wait_event_interruptible(*req->wq, - req->status >= REQ_STATUS_RCVD); + err = wait_event_killable(*req->wq, req->status >= REQ_STATUS_RCVD); /* * Non kernel buffers are pinned, unpin them */ diff --git a/net/9p/trans_xen.c b/net/9p/trans_xen.c index 6ad3e043c617..325c56043007 100644 --- a/net/9p/trans_xen.c +++ b/net/9p/trans_xen.c @@ -156,8 +156,8 @@ static int p9_xen_request(struct p9_client *client, struct p9_req_t *p9_req) ring = &priv->rings[num]; again: - while (wait_event_interruptible(ring->wq, - p9_xen_write_todo(ring, size)) != 0) + while (wait_event_killable(ring->wq, + p9_xen_write_todo(ring, size)) != 0) ; spin_lock_irqsave(&ring->lock, flags);

7 years, 7 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] ext4: prevent data corruption with inline data + DAX" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 559db4c6d784ceedc2a5418ced4d357cb843e221 Mon Sep 17 00:00:00 2001 From: Ross Zwisler <ross.zwisler(a)linux.intel.com> Date: Thu, 12 Oct 2017 11:52:34 -0400 Subject: [PATCH] ext4: prevent data corruption with inline data + DAX If an inode has inline data it is currently prevented from using DAX by a check in ext4_set_inode_flags(). When the inode grows inline data via ext4_create_inline_data() or removes its inline data via ext4_destroy_inline_data_nolock(), the value of S_DAX can change. Currently these changes are unsafe because we don't hold off page faults and I/O, write back dirty radix tree entries and invalidate all mappings. There are also issues with mm-level races when changing the value of S_DAX, as well as issues with the VM_MIXEDMAP flag: https://www.spinics.net/lists/linux-xfs/msg09859.html The unsafe transition of S_DAX can reliably cause data corruption, as shown by the following fstest: https://patchwork.kernel.org/patch/9948381/ Fix this issue by preventing the DAX mount option from being used on filesystems that were created to support inline data. Inline data is an option given to mkfs.ext4. Signed-off-by: Ross Zwisler <ross.zwisler(a)linux.intel.com> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Reviewed-by: Jan Kara <jack(a)suse.cz> CC: stable(a)vger.kernel.org diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index f0bbc8cb6555..1367553c43bb 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -303,11 +303,6 @@ static int ext4_create_inline_data(handle_t *handle, EXT4_I(inode)->i_inline_size = len + EXT4_MIN_INLINE_DATA_SIZE; ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS); ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA); - /* - * Propagate changes to inode->i_flags as well - e.g. S_DAX may - * get cleared - */ - ext4_set_inode_flags(inode); get_bh(is.iloc.bh); error = ext4_mark_iloc_dirty(handle, inode, &is.iloc); @@ -452,11 +447,6 @@ static int ext4_destroy_inline_data_nolock(handle_t *handle, } } ext4_clear_inode_flag(inode, EXT4_INODE_INLINE_DATA); - /* - * Propagate changes to inode->i_flags as well - e.g. S_DAX may - * get set. - */ - ext4_set_inode_flags(inode); get_bh(is.iloc.bh); error = ext4_mark_iloc_dirty(handle, inode, &is.iloc); diff --git a/fs/ext4/super.c b/fs/ext4/super.c index b104096fce9e..986475c0d552 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3708,6 +3708,11 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) } if (sbi->s_mount_opt & EXT4_MOUNT_DAX) { + if (ext4_has_feature_inline_data(sb)) { + ext4_msg(sb, KERN_ERR, "Cannot use DAX on a filesystem" + " that may contain inline data"); + goto failed_mount; + } err = bdev_dax_supported(sb, blocksize); if (err) goto failed_mount;

7 years, 7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror