- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mm-avoid-returning-vm_fault_retry-from-page_mkwrite-handlers.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 6 16:43:17 CET 2017 From: Jan Kara <jack(a)suse.cz> Date: Wed, 8 Feb 2017 14:30:53 -0800 Subject: mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers From: Jan Kara <jack(a)suse.cz> [ Upstream commit 0911d0041c22922228ca52a977d7b0b0159fee4b ] Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return code (GFS2 or Lustre can definitely do this). However VM_FAULT_RETRY from ->page_mkwrite is completely unhandled by the mm code and results in locking and writeably mapping the page which definitely is not what the caller wanted. Fix Lustre and block_page_mkwrite_ret() used by other filesystems (notably GFS2) to return VM_FAULT_NOPAGE instead which results in bailing out from the fault code, the CPU then retries the access, and we fault again effectively doing what the handler wanted. Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz Signed-off-by: Jan Kara <jack(a)suse.cz> Reported-by: Al Viro <viro(a)ZenIV.linux.org.uk> Reviewed-by: Jinshan Xiong <jinshan.xiong(a)intel.com> Cc: Matthew Wilcox <willy(a)infradead.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/lustre/lustre/llite/llite_mmap.c | 4 +--- include/linux/buffer_head.h | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-) --- a/drivers/staging/lustre/lustre/llite/llite_mmap.c +++ b/drivers/staging/lustre/lustre/llite/llite_mmap.c @@ -402,15 +402,13 @@ static int ll_page_mkwrite(struct vm_are result = VM_FAULT_LOCKED; break; case -ENODATA: + case -EAGAIN: case -EFAULT: result = VM_FAULT_NOPAGE; break; case -ENOMEM: result = VM_FAULT_OOM; break; - case -EAGAIN: - result = VM_FAULT_RETRY; - break; default: result = VM_FAULT_SIGBUS; break; --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -234,12 +234,10 @@ static inline int block_page_mkwrite_ret { if (err == 0) return VM_FAULT_LOCKED; - if (err == -EFAULT) + if (err == -EFAULT || err == -EAGAIN) return VM_FAULT_NOPAGE; if (err == -ENOMEM) return VM_FAULT_OOM; - if (err == -EAGAIN) - return VM_FAULT_RETRY; /* -ENOSPC, -EDQUOT, -EIO ... */ return VM_FAULT_SIGBUS; } Patches currently in stable-queue which might be from jack(a)suse.cz are queue-4.4/mm-avoid-returning-vm_fault_retry-from-page_mkwrite-handlers.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "net/appletalk: Fix kernel memory disclosure" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/appletalk: Fix kernel memory disclosure to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-appletalk-fix-kernel-memory-disclosure.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 6 16:43:17 CET 2017 From: Vlad Tsyrklevich <vlad(a)tsyrklevich.net> Date: Mon, 9 Jan 2017 20:57:48 +0700 Subject: net/appletalk: Fix kernel memory disclosure From: Vlad Tsyrklevich <vlad(a)tsyrklevich.net> [ Upstream commit ce7e40c432ba84da104438f6799d460a4cad41bc ] ipddp_route structs contain alignment padding so kernel heap memory is leaked when they are copied to user space in ipddp_ioctl(SIOCFINDIPDDPRT). Change kmalloc() to kzalloc() to clear that memory. Signed-off-by: Vlad Tsyrklevich <vlad(a)tsyrklevich.net> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/appletalk/ipddp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/appletalk/ipddp.c +++ b/drivers/net/appletalk/ipddp.c @@ -191,7 +191,7 @@ static netdev_tx_t ipddp_xmit(struct sk_ */ static int ipddp_create(struct ipddp_route *new_rt) { - struct ipddp_route *rt = kmalloc(sizeof(*rt), GFP_KERNEL); + struct ipddp_route *rt = kzalloc(sizeof(*rt), GFP_KERNEL); if (rt == NULL) return -ENOMEM; Patches currently in stable-queue which might be from vlad(a)tsyrklevich.net are queue-4.4/net-appletalk-fix-kernel-memory-disclosure.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "KVM: arm/arm64: Fix occasional warning from the timer work function" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: arm/arm64: Fix occasional warning from the timer work function to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-arm-arm64-fix-occasional-warning-from-the-timer-work-function.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 6 16:43:17 CET 2017 From: Christoffer Dall <christoffer.dall(a)linaro.org> Date: Mon, 9 Jan 2017 12:18:56 +0100 Subject: KVM: arm/arm64: Fix occasional warning from the timer work function From: Christoffer Dall <christoffer.dall(a)linaro.org> [ Upstream commit 63e41226afc3f7a044b70325566fa86ac3142538 ] When a VCPU blocks (WFI) and has programmed the vtimer, we program a soft timer to expire in the future to wake up the vcpu thread when appropriate. Because such as wake up involves a vcpu kick, and the timer expire function can get called from interrupt context, and the kick may sleep, we have to schedule the kick in the work function. The work function currently has a warning that gets raised if it turns out that the timer shouldn't fire when it's run, which was added because the idea was that in that case the work should never have been cancelled. However, it turns out that this whole thing is racy and we can get spurious warnings. The problem is that we clear the armed flag in the work function, which may run in parallel with the kvm_timer_unschedule->timer_disarm() call. This results in a possible situation where the timer_disarm() call does not call cancel_work_sync(), which effectively synchronizes the completion of the work function with running the VCPU. As a result, the VCPU thread proceeds before the work function completees, causing changes to the timer state such that kvm_timer_should_fire(vcpu) returns false in the work function. All we do in the work function is to kick the VCPU, and an occasional rare extra kick never harmed anyone. Since the race above is extremely rare, we don't bother checking if the race happens but simply remove the check and the clearing of the armed flag from the work function. Reported-by: Matthias Brugger <mbrugger(a)suse.com> Reviewed-by: Marc Zyngier <marc.zyngier(a)arm.com> Signed-off-by: Christoffer Dall <christoffer.dall(a)linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- virt/kvm/arm/arch_timer.c | 3 --- 1 file changed, 3 deletions(-) --- a/virt/kvm/arm/arch_timer.c +++ b/virt/kvm/arm/arch_timer.c @@ -84,9 +84,6 @@ static void kvm_timer_inject_irq_work(st struct kvm_vcpu *vcpu; vcpu = container_of(work, struct kvm_vcpu, arch.timer_cpu.expired); - vcpu->arch.timer_cpu.armed = false; - - WARN_ON(!kvm_timer_should_fire(vcpu)); /* * If the vcpu is blocked we want to wake it up so that it will see Patches currently in stable-queue which might be from christoffer.dall(a)linaro.org are queue-4.4/kvm-arm-arm64-fix-occasional-warning-from-the-timer-work-function.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "kprobes/x86: Disable preemption in ftrace-based jprobes" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled kprobes/x86: Disable preemption in ftrace-based jprobes to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kprobes-x86-disable-preemption-in-ftrace-based-jprobes.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 6 16:43:17 CET 2017 From: Masami Hiramatsu <mhiramat(a)kernel.org> Date: Tue, 19 Sep 2017 19:01:40 +0900 Subject: kprobes/x86: Disable preemption in ftrace-based jprobes From: Masami Hiramatsu <mhiramat(a)kernel.org> [ Upstream commit 5bb4fc2d8641219732eb2bb654206775a4219aca ] Disable preemption in ftrace-based jprobe handlers as described in Documentation/kprobes.txt: "Probe handlers are run with preemption disabled." This will fix jprobes behavior when CONFIG_PREEMPT=y. Signed-off-by: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Alexei Starovoitov <ast(a)fb.com> Cc: Alexei Starovoitov <ast(a)kernel.org> Cc: Ananth N Mavinakayanahalli <ananth(a)linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Paul E . McKenney <paulmck(a)linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Link: http://lkml.kernel.org/r/150581530024.32348.9863783558598926771.stgit@devbox Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/kprobes/ftrace.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) --- a/arch/x86/kernel/kprobes/ftrace.c +++ b/arch/x86/kernel/kprobes/ftrace.c @@ -26,7 +26,7 @@ #include "common.h" static nokprobe_inline -int __skip_singlestep(struct kprobe *p, struct pt_regs *regs, +void __skip_singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb, unsigned long orig_ip) { /* @@ -41,20 +41,21 @@ int __skip_singlestep(struct kprobe *p, __this_cpu_write(current_kprobe, NULL); if (orig_ip) regs->ip = orig_ip; - return 1; } int skip_singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { - if (kprobe_ftrace(p)) - return __skip_singlestep(p, regs, kcb, 0); - else - return 0; + if (kprobe_ftrace(p)) { + __skip_singlestep(p, regs, kcb, 0); + preempt_enable_no_resched(); + return 1; + } + return 0; } NOKPROBE_SYMBOL(skip_singlestep); -/* Ftrace callback handler for kprobes */ +/* Ftrace callback handler for kprobes -- called under preepmt disabed */ void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip, struct ftrace_ops *ops, struct pt_regs *regs) { @@ -77,13 +78,17 @@ void kprobe_ftrace_handler(unsigned long /* Kprobe handler expects regs->ip = ip + 1 as breakpoint hit */ regs->ip = ip + sizeof(kprobe_opcode_t); + /* To emulate trap based kprobes, preempt_disable here */ + preempt_disable(); __this_cpu_write(current_kprobe, p); kcb->kprobe_status = KPROBE_HIT_ACTIVE; - if (!p->pre_handler || !p->pre_handler(p, regs)) + if (!p->pre_handler || !p->pre_handler(p, regs)) { __skip_singlestep(p, regs, kcb, orig_ip); + preempt_enable_no_resched(); + } /* * If pre_handler returns !0, it sets regs->ip and - * resets current kprobe. + * resets current kprobe, and keep preempt count +1. */ } end: Patches currently in stable-queue which might be from mhiramat(a)kernel.org are queue-4.4/kprobes-x86-disable-preemption-in-ftrace-based-jprobes.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "EDAC, sb_edac: Fix missing break in switch" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled EDAC, sb_edac: Fix missing break in switch to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: edac-sb_edac-fix-missing-break-in-switch.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 6 16:43:17 CET 2017 From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> Date: Mon, 16 Oct 2017 12:40:29 -0500 Subject: EDAC, sb_edac: Fix missing break in switch From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> [ Upstream commit a8e9b186f153a44690ad0363a56716e7077ad28c ] Add missing break statement in order to prevent the code from falling through. Signed-off-by: Gustavo A. R. Silva <garsilva(a)embeddedor.com> Cc: Qiuxu Zhuo <qiuxu.zhuo(a)intel.com> Cc: linux-edac <linux-edac(a)vger.kernel.org> Link: http://lkml.kernel.org/r/20171016174029.GA19757@embeddedor.com Signed-off-by: Borislav Petkov <bp(a)suse.de> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/edac/sb_edac.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -1773,6 +1773,7 @@ static int ibridge_mci_bind_devs(struct break; case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA: pvt->pci_ta = pdev; + break; case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS: pvt->pci_ras = pdev; break; Patches currently in stable-queue which might be from garsilva(a)embeddedor.com are queue-4.4/edac-sb_edac-fix-missing-break-in-switch.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-exynos-decon5433-set-standalone_update_f-on-output-enablement.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 6 16:43:17 CET 2017 From: Andrzej Hajda <a.hajda(a)samsung.com> Date: Tue, 17 Jan 2017 15:15:20 +0100 Subject: drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement From: Andrzej Hajda <a.hajda(a)samsung.com> [ Upstream commit 11d8bcef7a0399e1d2519f207fd575fc404306b4 ] DECON_TV requires STANDALONE_UPDATE after output enabling, otherwise it does not start. This change is neutral for DECON. Signed-off-by: Andrzej Hajda <a.hajda(a)samsung.com> Signed-off-by: Inki Dae <inki.dae(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -180,6 +180,8 @@ static void decon_commit(struct exynos_d /* enable output and display signal */ decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID | VIDCON0_ENVID_F, ~0); + + decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); } static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win, Patches currently in stable-queue which might be from a.hajda(a)samsung.com are queue-4.4/drm-exynos-decon5433-set-standalone_update_f-on-output-enablement.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "ima: fix hash algorithm initialization" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ima: fix hash algorithm initialization to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ima-fix-hash-algorithm-initialization.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 6 16:43:17 CET 2017 From: Boshi Wang <wangboshi(a)huawei.com> Date: Fri, 20 Oct 2017 16:01:03 +0800 Subject: ima: fix hash algorithm initialization From: Boshi Wang <wangboshi(a)huawei.com> [ Upstream commit ebe7c0a7be92bbd34c6ff5b55810546a0ee05bee ] The hash_setup function always sets the hash_setup_done flag, even when the hash algorithm is invalid. This prevents the default hash algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used. This patch sets hash_setup_done flag only for valid hash algorithms. Fixes: e7a2ad7eb6f4 "ima: enable support for larger default filedata hash algorithms" Signed-off-by: Boshi Wang <wangboshi(a)huawei.com> Signed-off-by: Mimi Zohar <zohar(a)linux.vnet.ibm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- security/integrity/ima/ima_main.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -52,6 +52,8 @@ static int __init hash_setup(char *str) ima_hash_algo = HASH_ALGO_SHA1; else if (strncmp(str, "md5", 3) == 0) ima_hash_algo = HASH_ALGO_MD5; + else + return 1; goto out; } @@ -61,6 +63,8 @@ static int __init hash_setup(char *str) break; } } + if (i == HASH_ALGO__LAST) + return 1; out: hash_setup_done = 1; return 1; Patches currently in stable-queue which might be from wangboshi(a)huawei.com are queue-4.4/ima-fix-hash-algorithm-initialization.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "dmaengine: pl330: fix double lock" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dmaengine: pl330: fix double lock to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dmaengine-pl330-fix-double-lock.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 6 16:43:17 CET 2017 From: Iago Abal <mail(a)iagoabal.eu> Date: Wed, 11 Jan 2017 14:00:21 +0100 Subject: dmaengine: pl330: fix double lock From: Iago Abal <mail(a)iagoabal.eu> [ Upstream commit 91539eb1fda2d530d3b268eef542c5414e54bf1a ] The static bug finder EBA (http://www.iagoabal.eu/eba/) reported the following double-lock bug: Double lock: 1. spin_lock_irqsave(pch->lock, flags) at pl330_free_chan_resources:2236; 2. call to function `pl330_release_channel' immediately after; 3. call to function `dma_pl330_rqcb' in line 1753; 4. spin_lock_irqsave(pch->lock, flags) at dma_pl330_rqcb:1505. I have fixed it as suggested by Marek Szyprowski. First, I have replaced `pch->lock' with `pl330->lock' in functions `pl330_alloc_chan_resources' and `pl330_free_chan_resources'. This avoids the double-lock by acquiring a different lock than `dma_pl330_rqcb'. NOTE that, as a result, `pl330_free_chan_resources' executes `list_splice_tail_init' on `pch->work_list' under lock `pl330->lock', whereas in the rest of the code `pch->work_list' is protected by `pch->lock'. I don't know if this may cause race conditions. Similarly `pch->cyclic' is written by `pl330_alloc_chan_resources' under `pl330->lock' but read by `pl330_tx_submit' under `pch->lock'. Second, I have removed locking from `pl330_request_channel' and `pl330_release_channel' functions. Function `pl330_request_channel' is only called from `pl330_alloc_chan_resources', so the lock is already held. Function `pl330_release_channel' is called from `pl330_free_chan_resources', which already holds the lock, and from `pl330_del'. Function `pl330_del' is called in an error path of `pl330_probe' and at the end of `pl330_remove', but I assume that there cannot be concurrent accesses to the protected data at those points. Signed-off-by: Iago Abal <mail(a)iagoabal.eu> Reviewed-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma/pl330.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -1657,7 +1657,6 @@ static bool _chan_ns(const struct pl330_ static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330) { struct pl330_thread *thrd = NULL; - unsigned long flags; int chans, i; if (pl330->state == DYING) @@ -1665,8 +1664,6 @@ static struct pl330_thread *pl330_reques chans = pl330->pcfg.num_chan; - spin_lock_irqsave(&pl330->lock, flags); - for (i = 0; i < chans; i++) { thrd = &pl330->channels[i]; if ((thrd->free) && (!_manager_ns(thrd) || @@ -1684,8 +1681,6 @@ static struct pl330_thread *pl330_reques thrd = NULL; } - spin_unlock_irqrestore(&pl330->lock, flags); - return thrd; } @@ -1703,7 +1698,6 @@ static inline void _free_event(struct pl static void pl330_release_channel(struct pl330_thread *thrd) { struct pl330_dmac *pl330; - unsigned long flags; if (!thrd || thrd->free) return; @@ -1715,10 +1709,8 @@ static void pl330_release_channel(struct pl330 = thrd->dmac; - spin_lock_irqsave(&pl330->lock, flags); _free_event(thrd, thrd->ev); thrd->free = true; - spin_unlock_irqrestore(&pl330->lock, flags); } /* Initialize the structure for PL330 configuration, that can be used @@ -2085,20 +2077,20 @@ static int pl330_alloc_chan_resources(st struct pl330_dmac *pl330 = pch->dmac; unsigned long flags; - spin_lock_irqsave(&pch->lock, flags); + spin_lock_irqsave(&pl330->lock, flags); dma_cookie_init(chan); pch->cyclic = false; pch->thread = pl330_request_channel(pl330); if (!pch->thread) { - spin_unlock_irqrestore(&pch->lock, flags); + spin_unlock_irqrestore(&pl330->lock, flags); return -ENOMEM; } tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch); - spin_unlock_irqrestore(&pch->lock, flags); + spin_unlock_irqrestore(&pl330->lock, flags); return 1; } @@ -2201,12 +2193,13 @@ static int pl330_pause(struct dma_chan * static void pl330_free_chan_resources(struct dma_chan *chan) { struct dma_pl330_chan *pch = to_pchan(chan); + struct pl330_dmac *pl330 = pch->dmac; unsigned long flags; tasklet_kill(&pch->task); pm_runtime_get_sync(pch->dmac->ddma.dev); - spin_lock_irqsave(&pch->lock, flags); + spin_lock_irqsave(&pl330->lock, flags); pl330_release_channel(pch->thread); pch->thread = NULL; @@ -2214,7 +2207,7 @@ static void pl330_free_chan_resources(st if (pch->cyclic) list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool); - spin_unlock_irqrestore(&pch->lock, flags); + spin_unlock_irqrestore(&pl330->lock, flags); pm_runtime_mark_last_busy(pch->dmac->ddma.dev); pm_runtime_put_autosuspend(pch->dmac->ddma.dev); } Patches currently in stable-queue which might be from mail(a)iagoabal.eu are queue-4.4/dmaengine-pl330-fix-double-lock.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "ARM: OMAP1: DMA: Correct the number of logical channels" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: OMAP1: DMA: Correct the number of logical channels to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-omap1-dma-correct-the-number-of-logical-channels.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 6 16:43:17 CET 2017 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Date: Tue, 3 Jan 2017 13:22:34 +0200 Subject: ARM: OMAP1: DMA: Correct the number of logical channels From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> [ Upstream commit 657279778af54f35e54b07b6687918f254a2992c ] OMAP1510, OMAP5910 and OMAP310 have only 9 logical channels. OMAP1610, OMAP5912, OMAP1710, OMAP730, and OMAP850 have 16 logical channels available. The wired 17 for the lch_count must have been used to cover the 16 + 1 dedicated LCD channel, in reality we can only use 9 or 16 channels. The d->chan_count is not used by the omap-dma stack, so we can skip the setup. chan_count was configured to the number of logical channels and not the actual number of physical channels anyways. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Acked-by: Aaro Koskinen <aaro.koskinen(a)iki.fi> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/mach-omap1/dma.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -31,7 +31,6 @@ #include "soc.h" #define OMAP1_DMA_BASE (0xfffed800) -#define OMAP1_LOGICAL_DMA_CH_COUNT 17 static u32 enable_1510_mode; @@ -311,8 +310,6 @@ static int __init omap1_system_dma_init( goto exit_iounmap; } - d->lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; - /* Valid attributes for omap1 plus processors */ if (cpu_is_omap15xx()) d->dev_caps = ENABLE_1510_MODE; @@ -329,13 +326,14 @@ static int __init omap1_system_dma_init( d->dev_caps |= CLEAR_CSR_ON_READ; d->dev_caps |= IS_WORD_16; - if (cpu_is_omap15xx()) - d->chan_count = 9; - else if (cpu_is_omap16xx() || cpu_is_omap7xx()) { - if (!(d->dev_caps & ENABLE_1510_MODE)) - d->chan_count = 16; + /* available logical channels */ + if (cpu_is_omap15xx()) { + d->lch_count = 9; + } else { + if (d->dev_caps & ENABLE_1510_MODE) + d->lch_count = 9; else - d->chan_count = 9; + d->lch_count = 16; } p = dma_plat_info; Patches currently in stable-queue which might be from peter.ujfalusi(a)ti.com are queue-4.4/arm-omap1-dma-correct-the-number-of-logical-channels.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] [GIT PULL] commits for Linux 3.18

by alexander.levin＠verizon.com

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi Greg, Pleae pull commits for Linux 3.18 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit b42518053ffd221d79cff2df8c0257db88a71334: Linux 3.18.85 (2017-11-30 08:35:56 +0000) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-3.18-02122017 for you to fetch changes up to 3d9d1cf7d8b14d324f86d73bde3ec338cdaa3afe: net: fec: fix multicast filtering hardware setup (2017-12-02 10:37:51 -0500) - ---------------------------------------------------------------- for-greg-3.18-02122017 - ---------------------------------------------------------------- Ben Hutchings (1): usbip: tools: Install all headers needed for libusbip development Benjamin Coddington (1): nfs: Don't take a reference on fl->fl_file for LOCK operation Boshi Wang (1): ima: fix hash algorithm initialization Colin Ian King (1): net: sctp: fix array overrun read on sctp_timer_tbl David Forster (1): vti6: fix device register to report IFLA_INFO_KIND Gustavo A. R. Silva (1): EDAC, sb_edac: Fix missing break in switch Hiromitsu Yamasaki (1): spi: sh-msiof: Fix DMA transfer size check Jan Kara (1): mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers Jibin Xu (1): sysrq : fix Show Regs call trace on ARM Lukas Wunner (1): serial: 8250_fintek: Fix rs485 disablement on invalid ioctl() Masami Hiramatsu (1): kprobes: Use synchronize_rcu_tasks() for optprobe with CONFIG_PREEMPT=y Parthasarathy Bhuvaragan (1): tipc: fix cleanup at module unload Peter Ujfalusi (1): ARM: OMAP1: DMA: Correct the number of logical channels Rui Sousa (1): net: fec: fix multicast filtering hardware setup Thomas Richter (1): perf test attr: Fix ignored test case result Trond Myklebust (1): NFSv4: Fix client recovery when server reboots multiple times Vlad Tsyrklevich (1): net/appletalk: Fix kernel memory disclosure arch/Kconfig | 2 +- arch/arm/mach-omap1/dma.c | 16 +++++++--------- drivers/edac/sb_edac.c | 1 + drivers/net/appletalk/ipddp.c | 2 +- drivers/net/ethernet/freescale/fec_main.c | 23 +++++++++-------------- drivers/spi/spi-sh-msiof.c | 2 +- drivers/staging/lustre/lustre/llite/llite_mmap.c | 4 +--- drivers/tty/serial/8250/8250_fintek.c | 2 +- drivers/tty/sysrq.c | 9 +++++++-- fs/nfs/nfs4proc.c | 3 --- fs/nfs/nfs4state.c | 1 - include/linux/buffer_head.h | 4 +--- kernel/kprobes.c | 14 ++++++++------ net/ipv6/ip6_vti.c | 2 +- net/sctp/debug.c | 2 +- net/tipc/server.c | 4 +--- security/integrity/ima/ima_main.c | 4 ++++ tools/perf/tests/attr.c | 2 +- tools/usb/usbip/Makefile.am | 3 ++- 19 files changed, 48 insertions(+), 52 deletions(-) -----BEGIN PGP SIGNATURE----- iQIcBAEBCAAGBQJaIsq9AAoJEN6mb/eXdyzcpzkQAIKxDkXYIEP1a/A+c4jb90Jl 5zrHGdPoO4wxT7tOl+5KiDvlo82igPt72+Piyy/odrl8EfuTp0AUWIa8gsRsFNdn HrFHaxc2ysZm81wjZZFUjlLpGpARq6cQqVRUepAv1N+z4F7wRHVHfIuOkEBYSj5c 0pp2ncC6A1WKlpgqbh8V93Qjub/vMsqea4VdMJD9wPQuo7Y+MB6iAwYB8BsM+F48 pTf1sU6LHiiatSyiekOU5fdIK4kewuI9pCKXJSR9f3BY1MAy2egycA0/ZXDzgyzz 05RQw7cwAlS3d4IZLO8adeGDHlXQx6R34njs55hc6ZOUlzq4i1f7U1B4SWRC0A9L QAQ4hUcPkzymfIXMhALexPbf5iGT40Qn0VccGQ8KmMfbl4svBq4WwIHVuZMuNd9x q64plsHcqIyRBMMovC21FUYClXk3q8ov804GplVATj/9hC2g32UpHJkvhsi9jUHA P0TMJ2+WUYaggPYtWtfIAkx3gXJqmnSr82BUTPtQok3iC7WVCmht8X27kLb7T7Hu /fEr8+ItBFG7wmI3uUE7sQn6heaqdplXfoI7/7VYLNFb11x/CWe8WAkn2JNhpyPG 89aL/8sufMwH6OLTDA21dl2fNhPl5kDmIoVJUvDID3kECJwfdQ3V0KXaHe1PuvfX 2xIpl04C54uZxDTBbohf =KWbg -----END PGP SIGNATURE-----

7 years, 9 months

2
3
0 0

[Linux-stable-mirror] Patch "USB: serial: usb_debug: add new USB device id" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: usb_debug: add new USB device id to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-usb_debug-add-new-usb-device-id.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 762ff4678e89a5e3f8b2237533e04d3ef2737e78 Mon Sep 17 00:00:00 2001 From: Lu Baolu <baolu.lu(a)linux.intel.com> Date: Tue, 28 Nov 2017 12:40:59 +0800 Subject: USB: serial: usb_debug: add new USB device id From: Lu Baolu <baolu.lu(a)linux.intel.com> commit 762ff4678e89a5e3f8b2237533e04d3ef2737e78 upstream. USB vendor id and product id for Linux USB Debug Target is added. Signed-off-by: Lu Baolu <baolu.lu(a)linux.intel.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/usb_debug.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -34,12 +34,14 @@ static const struct usb_device_id id_tab }; static const struct usb_device_id dbc_id_table[] = { + { USB_DEVICE(0x1d6b, 0x0010) }, { USB_DEVICE(0x1d6b, 0x0011) }, { }, }; static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(0x0525, 0x127a) }, + { USB_DEVICE(0x1d6b, 0x0010) }, { USB_DEVICE(0x1d6b, 0x0011) }, { }, }; Patches currently in stable-queue which might be from baolu.lu(a)linux.intel.com are queue-4.14/usb-serial-usb_debug-add-new-usb-device-id.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "USB: serial: option: add Quectel BG96 id" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: option: add Quectel BG96 id to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-option-add-quectel-bg96-id.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c654b21ede93845863597de9ad774fd30db5f2ab Mon Sep 17 00:00:00 2001 From: Sebastian Sjoholm <ssjoholm(a)mac.com> Date: Mon, 20 Nov 2017 19:29:32 +0100 Subject: USB: serial: option: add Quectel BG96 id From: Sebastian Sjoholm <ssjoholm(a)mac.com> commit c654b21ede93845863597de9ad774fd30db5f2ab upstream. Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development board (EVB). The USB id is added to option.c to allow DIAG,GPS,AT and modem communication with the BG96. Signed-off-by: Sebastian Sjoholm <ssjoholm(a)mac.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -241,6 +241,7 @@ static void option_instat_callback(struc /* These Quectel products use Quectel's vendor ID */ #define QUECTEL_PRODUCT_EC21 0x0121 #define QUECTEL_PRODUCT_EC25 0x0125 +#define QUECTEL_PRODUCT_BG96 0x0296 #define CMOTECH_VENDOR_ID 0x16d8 #define CMOTECH_PRODUCT_6001 0x6001 @@ -1185,6 +1186,8 @@ static const struct usb_device_id option .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), Patches currently in stable-queue which might be from ssjoholm(a)mac.com are queue-4.14/usb-serial-option-add-quectel-bg96-id.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "serial: 8250_early: Only set divisor if valid clk & baud" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: 8250_early: Only set divisor if valid clk & baud to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-8250_early-only-set-divisor-if-valid-clk-baud.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 0ff3ab701963a845d52337ded7eebf2d1a14fe00 Mon Sep 17 00:00:00 2001 From: Matt Redfearn <matt.redfearn(a)mips.com> Date: Wed, 22 Nov 2017 09:57:28 +0000 Subject: serial: 8250_early: Only set divisor if valid clk & baud From: Matt Redfearn <matt.redfearn(a)mips.com> commit 0ff3ab701963a845d52337ded7eebf2d1a14fe00 upstream. If either uartclk or baud are 0, avoid calculating and setting a divisor based on them since the output will almost certainly be garbage. This also allows platforms such as the MIPS generic kernel, which has no way to know a valid BASE_BASE for the board it is actually booted on at compile time, to set BASE_BAUD to 0 and avoid early_8250 setting a bad divisor. This fixes a regression caused by commit 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure"), which changed the behavior of of_setup_earlycon such that it sets a baud rate in the earlycon structure where previously it was left as 0. All boards supported by the MIPS generic kernel started outputting garbage from the boot console due to an incorrect divisor being set. Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure") Signed-off-by: Matt Redfearn <matt.redfearn(a)mips.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/8250/8250_early.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -125,12 +125,14 @@ static void __init init_port(struct earl serial8250_early_out(port, UART_FCR, 0); /* no fifo */ serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */ - divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud); - c = serial8250_early_in(port, UART_LCR); - serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB); - serial8250_early_out(port, UART_DLL, divisor & 0xff); - serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff); - serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); + if (port->uartclk && device->baud) { + divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud); + c = serial8250_early_in(port, UART_LCR); + serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB); + serial8250_early_out(port, UART_DLL, divisor & 0xff); + serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff); + serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); + } } int __init early_serial8250_setup(struct earlycon_device *device, Patches currently in stable-queue which might be from matt.redfearn(a)mips.com are queue-4.14/mips-add-custom-serial.h-with-base_baud-override-for-generic-kernel.patch queue-4.14/serial-8250_early-only-set-divisor-if-valid-clk-baud.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: Add custom serial.h with BASE_BAUD override for generic kernel to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-add-custom-serial.h-with-base_baud-override-for-generic-kernel.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c8ec2041f549e7f2dee0c34d25381be6f7805f99 Mon Sep 17 00:00:00 2001 From: Matt Redfearn <matt.redfearn(a)mips.com> Date: Tue, 28 Nov 2017 15:22:20 +0000 Subject: MIPS: Add custom serial.h with BASE_BAUD override for generic kernel From: Matt Redfearn <matt.redfearn(a)mips.com> commit c8ec2041f549e7f2dee0c34d25381be6f7805f99 upstream. Add a custom serial.h header for MIPS, allowing platforms to override the asm-generic version if required. The generic platform uses this header to set BASE_BAUD to 0. The generic platform supports multiple boards, which may have different UART clocks. Also one of the boards supported is the Boston FPGA board, where the UART clock depends on the loaded FPGA bitfile. As such there is no way that the generic kernel can set a compile time default BASE_BAUD. Commit 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure") changed the behavior of of_setup_earlycon such that any baud rate set in the device tree is now set in the earlycon structure. The UART driver will then calculate a divisor based on BASE_BAUD and set it. With MIPS generic kernels this resulted in garbage output due to the incorrect uart clock rate being used to calculate a divisor. This commit, combined with "serial: 8250_early: Only set divisor if valid clk & baud" prevents the earlycon code setting a bad divisor and restores earlycon output. Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure") Signed-off-by: Matt Redfearn <matt.redfearn(a)mips.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/include/asm/Kbuild | 1 - arch/mips/include/asm/serial.h | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 1 deletion(-) --- a/arch/mips/include/asm/Kbuild +++ b/arch/mips/include/asm/Kbuild @@ -16,7 +16,6 @@ generic-y += qrwlock.h generic-y += qspinlock.h generic-y += sections.h generic-y += segment.h -generic-y += serial.h generic-y += trace_clock.h generic-y += unaligned.h generic-y += user.h --- /dev/null +++ b/arch/mips/include/asm/serial.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2017 MIPS Tech, LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __ASM__SERIAL_H +#define __ASM__SERIAL_H + +#ifdef CONFIG_MIPS_GENERIC +/* + * Generic kernels cannot know a correct value for all platforms at + * compile time. Set it to 0 to prevent 8250_early using it + */ +#define BASE_BAUD 0 +#else +#include <asm-generic/serial.h> +#endif + +#endif /* __ASM__SERIAL_H */ Patches currently in stable-queue which might be from matt.redfearn(a)mips.com are queue-4.14/mips-add-custom-serial.h-with-base_baud-override-for-generic-kernel.patch queue-4.14/serial-8250_early-only-set-divisor-if-valid-clk-baud.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "ANDROID: binder: fix transaction leak." has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ANDROID: binder: fix transaction leak. to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: android-binder-fix-transaction-leak.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From fb2c445277e7b0b4ffe10de8114bad4eccaca948 Mon Sep 17 00:00:00 2001 From: Martijn Coenen <maco(a)android.com> Date: Mon, 13 Nov 2017 10:06:08 +0100 Subject: ANDROID: binder: fix transaction leak. From: Martijn Coenen <maco(a)android.com> commit fb2c445277e7b0b4ffe10de8114bad4eccaca948 upstream. If a call to put_user() fails, we failed to properly free a transaction and send a failed reply (if necessary). Signed-off-by: Martijn Coenen <maco(a)android.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/android/binder.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-) --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -1948,6 +1948,26 @@ static void binder_send_failed_reply(str } /** + * binder_cleanup_transaction() - cleans up undelivered transaction + * @t: transaction that needs to be cleaned up + * @reason: reason the transaction wasn't delivered + * @error_code: error to return to caller (if synchronous call) + */ +static void binder_cleanup_transaction(struct binder_transaction *t, + const char *reason, + uint32_t error_code) +{ + if (t->buffer->target_node && !(t->flags & TF_ONE_WAY)) { + binder_send_failed_reply(t, error_code); + } else { + binder_debug(BINDER_DEBUG_DEAD_TRANSACTION, + "undelivered transaction %d, %s\n", + t->debug_id, reason); + binder_free_transaction(t); + } +} + +/** * binder_validate_object() - checks for a valid metadata object in a buffer. * @buffer: binder_buffer that we're parsing. * @offset: offset in the buffer at which to validate an object. @@ -4015,12 +4035,20 @@ retry: if (put_user(cmd, (uint32_t __user *)ptr)) { if (t_from) binder_thread_dec_tmpref(t_from); + + binder_cleanup_transaction(t, "put_user failed", + BR_FAILED_REPLY); + return -EFAULT; } ptr += sizeof(uint32_t); if (copy_to_user(ptr, &tr, sizeof(tr))) { if (t_from) binder_thread_dec_tmpref(t_from); + + binder_cleanup_transaction(t, "copy_to_user failed", + BR_FAILED_REPLY); + return -EFAULT; } ptr += sizeof(tr); @@ -4090,15 +4118,9 @@ static void binder_release_work(struct b struct binder_transaction *t; t = container_of(w, struct binder_transaction, work); - if (t->buffer->target_node && - !(t->flags & TF_ONE_WAY)) { - binder_send_failed_reply(t, BR_DEAD_REPLY); - } else { - binder_debug(BINDER_DEBUG_DEAD_TRANSACTION, - "undelivered transaction %d\n", - t->debug_id); - binder_free_transaction(t); - } + + binder_cleanup_transaction(t, "process died.", + BR_DEAD_REPLY); } break; case BINDER_WORK_RETURN_ERROR: { struct binder_error *e = container_of( Patches currently in stable-queue which might be from maco(a)android.com are queue-4.14/android-binder-fix-transaction-leak.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] usbip: fix usbip attach to find a port that matches the" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1ac7c8a78be85f84b019d3d2742d1a9f07255cc5 Mon Sep 17 00:00:00 2001 From: Shuah Khan <shuahkh(a)osg.samsung.com> Date: Wed, 29 Nov 2017 15:24:22 -0700 Subject: [PATCH] usbip: fix usbip attach to find a port that matches the requested speed usbip attach fails to find a free port when the device on the first port is a USB_SPEED_SUPER device and non-super speed device is being attached. It keeps checking the first port and returns without a match getting stuck in a loop. Fix it check to find the first port with matching speed. Reported-by: Juan Zea <juan.zea(a)qindel.com> Signed-off-by: Shuah Khan <shuahkh(a)osg.samsung.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/tools/usb/usbip/libsrc/vhci_driver.c b/tools/usb/usbip/libsrc/vhci_driver.c index 5727dfb15a83..8a1cd1616de4 100644 --- a/tools/usb/usbip/libsrc/vhci_driver.c +++ b/tools/usb/usbip/libsrc/vhci_driver.c @@ -329,9 +329,17 @@ int usbip_vhci_refresh_device_list(void) int usbip_vhci_get_free_port(uint32_t speed) { for (int i = 0; i < vhci_driver->nports; i++) { - if (speed == USB_SPEED_SUPER && - vhci_driver->idev[i].hub != HUB_SPEED_SUPER) - continue; + + switch (speed) { + case USB_SPEED_SUPER: + if (vhci_driver->idev[i].hub != HUB_SPEED_SUPER) + continue; + break; + default: + if (vhci_driver->idev[i].hub != HUB_SPEED_HIGH) + continue; + break; + } if (vhci_driver->idev[i].status == VDEV_ST_NULL) return vhci_driver->idev[i].port;

7 years, 9 months

3
2
0 0

[Linux-stable-mirror] [PATCH] usb: dwc2: Remove version check in GSNPSID

by Gevorg Sahakyan

Only check the ID portion of the GSNPSID register and don’t check the version. This will allow the driver to work with version 4.00a and later of the DWC_hsotg IP. Cc: stable(a)vger.kernel.org Signed-off-by: Gevorg Sahakyan <sahakyan(a)synopsys.com> Signed-off-by: Minas Harutyunyan <hminas(a)synopsys.com> --- drivers/usb/dwc2/core.h | 5 +++++ drivers/usb/dwc2/hw.h | 1 + drivers/usb/dwc2/params.c | 11 +++++------ 3 files changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 0f0c21cf0192..7439aa6e35f6 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -951,6 +951,11 @@ struct dwc2_hsotg { #define DWC2_FS_IOT_REV_1_00a 0x5531100a #define DWC2_HS_IOT_REV_1_00a 0x5532100a + /* DWC OTG HW Core ID */ +#define DWC2_OTG_ID 0x4f540000 +#define DWC2_FS_IOT_ID 0x55310000 +#define DWC2_HS_IOT_ID 0x55320000 + #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) union dwc2_hcd_internal_flags { u32 d32; diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index 2c906d8ee465..43a3fb00f14f 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -231,6 +231,7 @@ #define GUID HSOTG_REG(0x003c) #define GSNPSID HSOTG_REG(0x0040) #define GHWCFG1 HSOTG_REG(0x0044) +#define GSNPSID_ID_MASK GENMASK(31, 16) #define GHWCFG2 HSOTG_REG(0x0048) #define GHWCFG2_OTG_ENABLE_IC_USB BIT(31) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 9c3ff66a2eb8..fc4d93d78ec3 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -630,14 +630,13 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) /* * Attempt to ensure this device is really a DWC_otg Controller. * Read and verify the GSNPSID register contents. The value should be - * 0x45f42xxx or 0x45f43xxx, which corresponds to either "OT2" or "OT3", - * as in "OTG version 2.xx" or "OTG version 3.xx". + * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx */ + hw->snpsid = dwc2_readl(hsotg->regs + GSNPSID); - if ((hw->snpsid & 0xfffff000) != 0x4f542000 && - (hw->snpsid & 0xfffff000) != 0x4f543000 && - (hw->snpsid & 0xffff0000) != 0x55310000 && - (hw->snpsid & 0xffff0000) != 0x55320000) { + if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID && + (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID && + (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) { dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n", hw->snpsid); return -ENODEV; -- 2.11.0

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "s390/runtime instrumentation: simplify task exit handling" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/runtime instrumentation: simplify task exit handling to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-runtime-instrumentation-simplify-task-exit-handling.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8d9047f8b967ce6181fd824ae922978e1b055cc0 Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens(a)de.ibm.com> Date: Mon, 11 Sep 2017 11:24:22 +0200 Subject: s390/runtime instrumentation: simplify task exit handling From: Heiko Carstens <heiko.carstens(a)de.ibm.com> commit 8d9047f8b967ce6181fd824ae922978e1b055cc0 upstream. Free data structures required for runtime instrumentation from arch_release_task_struct(). This allows to simplify the code a bit, and also makes the semantics a bit easier: arch_release_task_struct() is never called from the task that is being removed. In addition this allows to get rid of exit_thread() in a later patch. Signed-off-by: Heiko Carstens <heiko.carstens(a)de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/s390/include/asm/runtime_instr.h | 4 +++- arch/s390/kernel/process.c | 3 +-- arch/s390/kernel/runtime_instr.c | 30 +++++++++++++++--------------- 3 files changed, 19 insertions(+), 18 deletions(-) --- a/arch/s390/include/asm/runtime_instr.h +++ b/arch/s390/include/asm/runtime_instr.h @@ -85,6 +85,8 @@ static inline void restore_ri_cb(struct load_runtime_instr_cb(&runtime_instr_empty_cb); } -void exit_thread_runtime_instr(void); +struct task_struct; + +void runtime_instr_release(struct task_struct *tsk); #endif /* _RUNTIME_INSTR_H */ --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -70,8 +70,6 @@ extern void kernel_thread_starter(void); */ void exit_thread(struct task_struct *tsk) { - if (tsk == current) - exit_thread_runtime_instr(); } void flush_thread(void) @@ -84,6 +82,7 @@ void release_thread(struct task_struct * void arch_release_task_struct(struct task_struct *tsk) { + runtime_instr_release(tsk); } int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) --- a/arch/s390/kernel/runtime_instr.c +++ b/arch/s390/kernel/runtime_instr.c @@ -18,11 +18,24 @@ /* empty control block to disable RI by loading it */ struct runtime_instr_cb runtime_instr_empty_cb; +void runtime_instr_release(struct task_struct *tsk) +{ + kfree(tsk->thread.ri_cb); +} + static void disable_runtime_instr(void) { - struct pt_regs *regs = task_pt_regs(current); + struct task_struct *task = current; + struct pt_regs *regs; + if (!task->thread.ri_cb) + return; + regs = task_pt_regs(task); + preempt_disable(); load_runtime_instr_cb(&runtime_instr_empty_cb); + kfree(task->thread.ri_cb); + task->thread.ri_cb = NULL; + preempt_enable(); /* * Make sure the RI bit is deleted from the PSW. If the user did not @@ -43,19 +56,6 @@ static void init_runtime_instr_cb(struct cb->valid = 1; } -void exit_thread_runtime_instr(void) -{ - struct task_struct *task = current; - - preempt_disable(); - if (!task->thread.ri_cb) - return; - disable_runtime_instr(); - kfree(task->thread.ri_cb); - task->thread.ri_cb = NULL; - preempt_enable(); -} - SYSCALL_DEFINE1(s390_runtime_instr, int, command) { struct runtime_instr_cb *cb; @@ -64,7 +64,7 @@ SYSCALL_DEFINE1(s390_runtime_instr, int, return -EOPNOTSUPP; if (command == S390_RUNTIME_INSTR_STOP) { - exit_thread_runtime_instr(); + disable_runtime_instr(); return 0; } Patches currently in stable-queue which might be from heiko.carstens(a)de.ibm.com are queue-4.9/s390-runtime-instrumentation-simplify-task-exit-handling.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "s390/runtime instrumentation: simplify task exit handling" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/runtime instrumentation: simplify task exit handling to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-runtime-instrumentation-simplify-task-exit-handling.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8d9047f8b967ce6181fd824ae922978e1b055cc0 Mon Sep 17 00:00:00 2001 From: Heiko Carstens <heiko.carstens(a)de.ibm.com> Date: Mon, 11 Sep 2017 11:24:22 +0200 Subject: s390/runtime instrumentation: simplify task exit handling From: Heiko Carstens <heiko.carstens(a)de.ibm.com> commit 8d9047f8b967ce6181fd824ae922978e1b055cc0 upstream. Free data structures required for runtime instrumentation from arch_release_task_struct(). This allows to simplify the code a bit, and also makes the semantics a bit easier: arch_release_task_struct() is never called from the task that is being removed. In addition this allows to get rid of exit_thread() in a later patch. Signed-off-by: Heiko Carstens <heiko.carstens(a)de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/s390/include/asm/runtime_instr.h | 4 +++- arch/s390/kernel/process.c | 2 +- arch/s390/kernel/runtime_instr.c | 30 +++++++++++++++--------------- 3 files changed, 19 insertions(+), 17 deletions(-) --- a/arch/s390/include/asm/runtime_instr.h +++ b/arch/s390/include/asm/runtime_instr.h @@ -85,6 +85,8 @@ static inline void restore_ri_cb(struct load_runtime_instr_cb(&runtime_instr_empty_cb); } -void exit_thread_runtime_instr(void); +struct task_struct; + +void runtime_instr_release(struct task_struct *tsk); #endif /* _RUNTIME_INSTR_H */ --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -72,7 +72,6 @@ extern void kernel_thread_starter(void); */ void exit_thread(void) { - exit_thread_runtime_instr(); } void flush_thread(void) @@ -87,6 +86,7 @@ void arch_release_task_struct(struct tas { /* Free either the floating-point or the vector register save area */ kfree(tsk->thread.fpu.regs); + runtime_instr_release(tsk); } int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) --- a/arch/s390/kernel/runtime_instr.c +++ b/arch/s390/kernel/runtime_instr.c @@ -18,11 +18,24 @@ /* empty control block to disable RI by loading it */ struct runtime_instr_cb runtime_instr_empty_cb; +void runtime_instr_release(struct task_struct *tsk) +{ + kfree(tsk->thread.ri_cb); +} + static void disable_runtime_instr(void) { - struct pt_regs *regs = task_pt_regs(current); + struct task_struct *task = current; + struct pt_regs *regs; + if (!task->thread.ri_cb) + return; + regs = task_pt_regs(task); + preempt_disable(); load_runtime_instr_cb(&runtime_instr_empty_cb); + kfree(task->thread.ri_cb); + task->thread.ri_cb = NULL; + preempt_enable(); /* * Make sure the RI bit is deleted from the PSW. If the user did not @@ -43,19 +56,6 @@ static void init_runtime_instr_cb(struct cb->valid = 1; } -void exit_thread_runtime_instr(void) -{ - struct task_struct *task = current; - - preempt_disable(); - if (!task->thread.ri_cb) - return; - disable_runtime_instr(); - kfree(task->thread.ri_cb); - task->thread.ri_cb = NULL; - preempt_enable(); -} - SYSCALL_DEFINE1(s390_runtime_instr, int, command) { struct runtime_instr_cb *cb; @@ -64,7 +64,7 @@ SYSCALL_DEFINE1(s390_runtime_instr, int, return -EOPNOTSUPP; if (command == S390_RUNTIME_INSTR_STOP) { - exit_thread_runtime_instr(); + disable_runtime_instr(); return 0; } Patches currently in stable-queue which might be from heiko.carstens(a)de.ibm.com are queue-4.4/s390-runtime-instrumentation-simplify-task-exit-handling.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-quirks-add-no-lpm-quirk-for-ky-688-usb-3.1-type-c-hub.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e43a12f1793ae1fe006e26fe9327a8840a92233c Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Date: Tue, 14 Nov 2017 01:31:15 -0500 Subject: usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> commit e43a12f1793ae1fe006e26fe9327a8840a92233c upstream. KY-688 USB 3.1 Type-C Hub internally uses a Genesys Logic hub to connect to Realtek r8153. Similar to commit ("7496cfe5431f2 usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter"), no-lpm can make r8153 ethernet work. Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -151,6 +151,9 @@ static const struct usb_device_id usb_qu /* appletouch */ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */ + { USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM }, + /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */ { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM }, Patches currently in stable-queue which might be from kai.heng.feng(a)canonical.com are queue-4.9/usb-quirks-add-no-lpm-quirk-for-ky-688-usb-3.1-type-c-hub.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: uas-always-apply-us_fl_no_ata_1x-quirk-to-seagate-devices.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 7fee72d5e8f1e7b8d8212e28291b1a0243ecf2f1 Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Tue, 14 Nov 2017 19:27:22 +0100 Subject: uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices From: Hans de Goede <hdegoede(a)redhat.com> commit 7fee72d5e8f1e7b8d8212e28291b1a0243ecf2f1 upstream. We've been adding this as a quirk on a per device basis hoping that newer disk enclosures would do better, but that has not happened, so simply apply this quirk to all Seagate devices. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/storage/uas-detect.h | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/usb/storage/uas-detect.h +++ b/drivers/usb/storage/uas-detect.h @@ -111,6 +111,10 @@ static int uas_use_uas_driver(struct usb } } + /* All Seagate disk enclosures have broken ATA pass-through support */ + if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bc2) + flags |= US_FL_NO_ATA_1X; + usb_stor_adjust_quirks(udev, &flags); if (flags & US_FL_IGNORE_UAS) { Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.9/uas-always-apply-us_fl_no_ata_1x-quirk-to-seagate-devices.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "serial: 8250_pci: Add Amazon PCI serial device ID" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: 8250_pci: Add Amazon PCI serial device ID to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-8250_pci-add-amazon-pci-serial-device-id.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 3bfd1300abfe3adb18e84a89d97a0e82a22124bb Mon Sep 17 00:00:00 2001 From: Matt Wilson <msw(a)amazon.com> Date: Mon, 13 Nov 2017 11:31:31 -0800 Subject: serial: 8250_pci: Add Amazon PCI serial device ID From: Matt Wilson <msw(a)amazon.com> commit 3bfd1300abfe3adb18e84a89d97a0e82a22124bb upstream. This device will be used in future Amazon EC2 instances as the primary serial port (i.e., data sent to this port will be available via the GetConsoleOuput [1] EC2 API). [1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.… Signed-off-by: Matt Wilson <msw(a)amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/8250/8250_pci.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5568,6 +5568,9 @@ static struct pci_device_id serial_pci_t { PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 }, { PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 }, + /* Amazon PCI serial device */ + { PCI_DEVICE(0x1d0f, 0x8250), .driver_data = pbn_b0_1_115200 }, + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL Patches currently in stable-queue which might be from msw(a)amazon.com are queue-4.9/serial-8250_pci-add-amazon-pci-serial-device-id.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-quirks-add-no-lpm-quirk-for-ky-688-usb-3.1-type-c-hub.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e43a12f1793ae1fe006e26fe9327a8840a92233c Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Date: Tue, 14 Nov 2017 01:31:15 -0500 Subject: usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> commit e43a12f1793ae1fe006e26fe9327a8840a92233c upstream. KY-688 USB 3.1 Type-C Hub internally uses a Genesys Logic hub to connect to Realtek r8153. Similar to commit ("7496cfe5431f2 usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter"), no-lpm can make r8153 ethernet work. Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -151,6 +151,9 @@ static const struct usb_device_id usb_qu /* appletouch */ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */ + { USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM }, + /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */ { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM }, Patches currently in stable-queue which might be from kai.heng.feng(a)canonical.com are queue-4.4/usb-quirks-add-no-lpm-quirk-for-ky-688-usb-3.1-type-c-hub.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: uas-always-apply-us_fl_no_ata_1x-quirk-to-seagate-devices.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 7fee72d5e8f1e7b8d8212e28291b1a0243ecf2f1 Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Tue, 14 Nov 2017 19:27:22 +0100 Subject: uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices From: Hans de Goede <hdegoede(a)redhat.com> commit 7fee72d5e8f1e7b8d8212e28291b1a0243ecf2f1 upstream. We've been adding this as a quirk on a per device basis hoping that newer disk enclosures would do better, but that has not happened, so simply apply this quirk to all Seagate devices. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/storage/uas-detect.h | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/usb/storage/uas-detect.h +++ b/drivers/usb/storage/uas-detect.h @@ -111,6 +111,10 @@ static int uas_use_uas_driver(struct usb } } + /* All Seagate disk enclosures have broken ATA pass-through support */ + if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bc2) + flags |= US_FL_NO_ATA_1X; + usb_stor_adjust_quirks(udev, &flags); if (flags & US_FL_IGNORE_UAS) { Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.4/uas-always-apply-us_fl_no_ata_1x-quirk-to-seagate-devices.patch

7 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "serial: 8250_pci: Add Amazon PCI serial device ID" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: 8250_pci: Add Amazon PCI serial device ID to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-8250_pci-add-amazon-pci-serial-device-id.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 3bfd1300abfe3adb18e84a89d97a0e82a22124bb Mon Sep 17 00:00:00 2001 From: Matt Wilson <msw(a)amazon.com> Date: Mon, 13 Nov 2017 11:31:31 -0800 Subject: serial: 8250_pci: Add Amazon PCI serial device ID From: Matt Wilson <msw(a)amazon.com> commit 3bfd1300abfe3adb18e84a89d97a0e82a22124bb upstream. This device will be used in future Amazon EC2 instances as the primary serial port (i.e., data sent to this port will be available via the GetConsoleOuput [1] EC2 API). [1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.… Signed-off-by: Matt Wilson <msw(a)amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/8250/8250_pci.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5797,6 +5797,9 @@ static struct pci_device_id serial_pci_t { PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 }, { PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 }, + /* Amazon PCI serial device */ + { PCI_DEVICE(0x1d0f, 0x8250), .driver_data = pbn_b0_1_115200 }, + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL Patches currently in stable-queue which might be from msw(a)amazon.com are queue-4.4/serial-8250_pci-add-amazon-pci-serial-device-id.patch

7 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror