- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "dt-bindings: Add vendor prefix for LEGO" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dt-bindings: Add vendor prefix for LEGO to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dt-bindings-add-vendor-prefix-for-lego.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: David Lechner <david(a)lechnology.com> Date: Fri, 13 Jan 2017 13:03:39 -0600 Subject: dt-bindings: Add vendor prefix for LEGO From: David Lechner <david(a)lechnology.com> [ Upstream commit 7dcc31e2e68a386a29070384b51683ece80982bf ] Add a vendor prefix for LEGO Systems A/S Acked-by: Rob Herring <robh(a)kernel.org> Signed-off-by: David Lechner <david(a)lechnology.com> Signed-off-by: Sekhar Nori <nsekhar(a)ti.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -126,6 +126,7 @@ keymile Keymile GmbH kinetic Kinetic Technologies lacie LaCie lantiq Lantiq Semiconductor +lego LEGO Systems A/S lenovo Lenovo Group Ltd. lg LG Corporation linux Linux-specific binding Patches currently in stable-queue which might be from david(a)lechnology.com are queue-4.4/dt-bindings-add-lego-mindstorms-ev3-compatible-specification.patch queue-4.4/dt-bindings-add-vendor-prefix-for-lego.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "drm: drm_minor_register(): Clean up debugfs on failure" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm: drm_minor_register(): Clean up debugfs on failure to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-drm_minor_register-clean-up-debugfs-on-failure.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Noralf Trønnes <noralf(a)tronnes.org> Date: Thu, 26 Jan 2017 23:56:04 +0100 Subject: drm: drm_minor_register(): Clean up debugfs on failure From: Noralf Trønnes <noralf(a)tronnes.org> [ Upstream commit a67834f8bfa1e2f48bb27d07b9a552ba7c3af82a ] Call drm_debugfs_cleanup() in case drm_debugfs_init() fails to cover for failure in the drm_driver.debugfs_init callback. Signed-off-by: Noralf TrÃ¸nnes <noralf(a)tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter(a)ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-3-noralf@… Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/drm_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -312,7 +312,7 @@ static int drm_minor_register(struct drm ret = drm_debugfs_init(minor, minor->index, drm_debugfs_root); if (ret) { DRM_ERROR("DRM: Failed to initialize /sys/kernel/debug/dri.\n"); - return ret; + goto err_debugfs; } ret = device_add(minor->kdev); Patches currently in stable-queue which might be from noralf(a)tronnes.org are queue-4.4/drm-drm_minor_register-clean-up-debugfs-on-failure.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-omap2plus_defconfig-fix-probe-errors-on-uarts-5-and-6.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Tony Lindgren <tony(a)atomide.com> Date: Fri, 20 Jan 2017 12:13:19 -0800 Subject: ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit 4cd6a59f5c1a9b0cca0da09fbba42b9450ffc899 ] We have more than four uarts on some SoCs and that can cause noise with errors while booting. Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -221,6 +221,7 @@ CONFIG_SERIO=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.4/arm-omap2plus_defconfig-fix-probe-errors-on-uarts-5-and-6.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "crypto: vmx - disable preemption to enable vsx in aes_ctr.c" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: vmx - disable preemption to enable vsx in aes_ctr.c to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-vmx-disable-preemption-to-enable-vsx-in-aes_ctr.c.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Li Zhong <zhong(a)linux.vnet.ibm.com> Date: Fri, 20 Jan 2017 16:35:33 +0800 Subject: crypto: vmx - disable preemption to enable vsx in aes_ctr.c From: Li Zhong <zhong(a)linux.vnet.ibm.com> [ Upstream commit 7dede913fc2ab9c0d3bff3a49e26fa9e858b0c13 ] Some preemptible check warnings were reported from enable_kernel_vsx(). This patch disables preemption in aes_ctr.c before enabling vsx, and they are now consistent with other files in the same directory. Signed-off-by: Li Zhong <zhong(a)linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/crypto/vmx/aes_ctr.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/crypto/vmx/aes_ctr.c +++ b/drivers/crypto/vmx/aes_ctr.c @@ -80,11 +80,13 @@ static int p8_aes_ctr_setkey(struct cryp int ret; struct p8_aes_ctr_ctx *ctx = crypto_tfm_ctx(tfm); + preempt_disable(); pagefault_disable(); enable_kernel_altivec(); enable_kernel_vsx(); ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key); pagefault_enable(); + preempt_enable(); ret += crypto_blkcipher_setkey(ctx->fallback, key, keylen); return ret; @@ -99,11 +101,13 @@ static void p8_aes_ctr_final(struct p8_a u8 *dst = walk->dst.virt.addr; unsigned int nbytes = walk->nbytes; + preempt_disable(); pagefault_disable(); enable_kernel_altivec(); enable_kernel_vsx(); aes_p8_encrypt(ctrblk, keystream, &ctx->enc_key); pagefault_enable(); + preempt_enable(); crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); @@ -132,6 +136,7 @@ static int p8_aes_ctr_crypt(struct blkci blkcipher_walk_init(&walk, dst, src, nbytes); ret = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE); while ((nbytes = walk.nbytes) >= AES_BLOCK_SIZE) { + preempt_disable(); pagefault_disable(); enable_kernel_altivec(); enable_kernel_vsx(); @@ -143,6 +148,7 @@ static int p8_aes_ctr_crypt(struct blkci &ctx->enc_key, walk.iv); pagefault_enable(); + preempt_enable(); /* We need to update IV mostly for last bytes/round */ inc = (nbytes & AES_BLOCK_MASK) / AES_BLOCK_SIZE; Patches currently in stable-queue which might be from zhong(a)linux.vnet.ibm.com are queue-4.4/crypto-vmx-disable-preemption-to-enable-vsx-in-aes_ctr.c.patch queue-4.4/kvm-ppc-book-3s-xics-correct-the-real-mode-icp-rejecting-counter.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "ARM: dts: imx53-qsb-common: fix FEC pinmux config" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: imx53-qsb-common: fix FEC pinmux config to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-imx53-qsb-common-fix-fec-pinmux-config.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Patrick Bruenn <p.bruenn(a)beckhoff.com> Date: Wed, 25 Jan 2017 06:25:48 +0100 Subject: ARM: dts: imx53-qsb-common: fix FEC pinmux config From: Patrick Bruenn <p.bruenn(a)beckhoff.com> [ Upstream commit 8b649e426336d7d4800ff9c82858328f4215ba01 ] The pinmux configuration in device tree was different from manual muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the bootloader already did the correct pinmuxing for us. But recently u-boot is migrating to reuse device tree files from the kernel tree, so it seems to be better to have the correct pinmuxing in our files, too. Signed-off-by: Patrick Bruenn <p.bruenn(a)beckhoff.com> Signed-off-by: Shawn Guo <shawnguo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -215,16 +215,16 @@ pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 >; }; Patches currently in stable-queue which might be from p.bruenn(a)beckhoff.com are queue-4.4/arm-dts-imx53-qsb-common-fix-fec-pinmux-config.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "[media] adv7604: Initialize drive strength to default when using DT" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled [media] adv7604: Initialize drive strength to default when using DT to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: adv7604-initialize-drive-strength-to-default-when-using-dt.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Lars-Peter Clausen <lars(a)metafoo.de> Date: Tue, 29 Nov 2016 09:23:48 -0200 Subject: [media] adv7604: Initialize drive strength to default when using DT From: Lars-Peter Clausen <lars(a)metafoo.de> [ Upstream commit da8892d410db224d9a24104529794e6e37e0c100 ] The adv7604 driver platform data contains fields for configuring the drive strength of the output pins. When probing the driver through DT these fields are not explicitly initialized, which means they are left at 0. This is a reserved setting for the drive strength configuration though and can cause signal integrity issues. Whether these signal integrity issues are visible depends on the PCB specifics (e.g. the higher the load capacitance for the output the more visible the issue). But it has been observed on existing solutions at high pixel clock rates. Initialize the drive strength settings to the power-on-reset value of the device when probing through devicetree to avoid this issue. Fixes: 0e158be0162b ("adv7604: Add DT support") Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas(a)ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/i2c/adv7604.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -2856,6 +2856,9 @@ static int adv76xx_parse_dt(struct adv76 state->pdata.alt_data_sat = 1; state->pdata.op_format_mode_sel = ADV7604_OP_FORMAT_MODE0; state->pdata.bus_order = ADV7604_BUS_ORDER_RGB; + state->pdata.dr_str_data = ADV76XX_DR_STR_MEDIUM_HIGH; + state->pdata.dr_str_clk = ADV76XX_DR_STR_MEDIUM_HIGH; + state->pdata.dr_str_sync = ADV76XX_DR_STR_MEDIUM_HIGH; return 0; } Patches currently in stable-queue which might be from lars(a)metafoo.de are queue-4.4/adv7604-initialize-drive-strength-to-default-when-using-dt.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] [GIT PULL] commits for Linux 3.18

by Levin, Alexander (Sasha Levin)

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi Greg, Pleae pull commits for Linux 3.18 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit 943dc0b3ef9f0168494d6dca305cd0cf53a0b3d4: Linux 3.18.80 (2017-11-08 10:03:50 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git for-greg-3.18-2 for you to fetch changes up to dc9288cdd7a681a1eeaa03054be6a098925f06db: IB/ipoib: Change list_del to list_del_init in the tx object (2017-11-08 15:41:33 -0500) - ---------------------------------------------------------------- Akinobu Mita (2): Input: mpr121 - handle multiple bits change of status register Input: mpr121 - set missing event capability Alison Schofield (1): iio: trigger: free trigger resource correctly David Lechner (2): dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification dt-bindings: Add vendor prefix for LEGO Feras Daoud (1): IB/ipoib: Change list_del to list_del_init in the tx object Gilad Ben-Yossef (1): IPsec: do not ignore crypto err in ah4 input Juergen Gross (1): xen/netback: set default upper limit of tx/rx queues to 8 Laurent Pinchart (1): serial: sh-sci: Fix register offsets for the IRDA serial port Maciej W. Rozycki (1): video: fbdev: pmag-ba-fb: Remove bad `__init' annotation Noralf TrÃ¸nnes (1): drm: drm_minor_register(): Clean up debugfs on failure Patrick Bruenn (1): ARM: dts: imx53-qsb-common: fix FEC pinmux config Tony Lindgren (1): ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 Volodymyr Bendiuga (1): phy: increase size of MII_BUS_ID_SIZE and bus_id William wu (1): usb: hcd: initialize hcd->flags to 0 when rm hcd Documentation/devicetree/bindings/arm/davinci.txt | 4 ++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 +++++++++--------- arch/arm/configs/omap2plus_defconfig | 1 + arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 - drivers/gpu/drm/drm_drv.c | 2 +- drivers/iio/trigger/iio-trig-interrupt.c | 8 ++++---- drivers/iio/trigger/iio-trig-sysfs.c | 2 +- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 +- drivers/input/keyboard/mpr121_touchkey.c | 24 ++++++++++++++-------- drivers/net/xen-netback/netback.c | 6 ++++-- drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 ++-- drivers/tty/serial/sh-sci.c | 17 ++++++++------- drivers/usb/core/hcd.c | 1 + drivers/video/fbdev/pmag-ba-fb.c | 2 +- include/linux/phy.h | 8 ++------ net/ipv4/ah4.c | 3 +++ 17 files changed, 59 insertions(+), 47 deletions(-) -----BEGIN PGP SIGNATURE----- iQIcBAEBCAAGBQJaA2z7AAoJEN6mb/eXdyzcY/8QAJupw2qifHueOo1aV55oBhVU bdaPFKjx/qDW9h+K3lbAIESv9LO2tnrWGyWwEr+WnALF8v34h4z5SyvlH1IbiANz FFS66JijtewDecrGd1jSDFsA31Fb/Fy42vHQIYMxiZFETByr3U4NlDS1zkzvp/IH tF1hVu9pMZXWhRLi1h1YxZe97ZU9Ryj+euMGAQW/PZsn3ZNu3YzOi8GqfHgXeCZE YmsKGU9brevJPJFbm2hBrxCfiRmtUgzb4eb914Mf0zm1B0HOmr3vKtsW/6QvDAYE rGrVXpUMyfoP80WJH9Mxw5qLeKnpSi6o5jdzXf3arzt5JJIyj8XL5X/C6IuoxTNx LbCFfJpW4Qyf+yIW01eM7f3zSlimTyLtih7cwMTGNge0LcAnFcrL+MC+s36tOpvG UH+HxDwzG+7dqnfTb/5ypbsZI6srgyb5PbxEuFzG/YM2/Es1QfWS9zPOzdaPE+Xn WzjU+CbIrSoiJc5qi/61nlhBVK+aNSIIyuNCGjY3FQV4OTYAAKWpezZa0uMFZS5r L3GCaYqZr551Z8uTOm0a4tiZ+1jZPlZ1Tv8YUGr0MqrcR2B0DIIxAeNgOnd8M2op acJkngJiYGrNGp3ZznZvv9ZMPPktRysVwN8u5s/SQvjDlYzCZhAPvnEsRezWLzuk 2/NLxsxp8qRMMK6d8LVh =kzGq -----END PGP SIGNATURE-----

7 years, 8 months

2
1
0 0

Re: [Linux-stable-mirror] [PATCH] HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection

by Jason Gerecke

On Thu, Oct 19, 2017 at 1:22 AM, Jiri Kosina <jikos(a)kernel.org> wrote: > On Wed, 18 Oct 2017, Jason Gerecke wrote: > >> The WACOM_PEN_FIELD macro is used to determine if a given HID field should be >> associated with pen input. This field includes several known collection types >> that Wacom pen data is contained in, but the WACOM_HID_WD_PEN application >> collection type is notably missing. This can result in fields within this >> kind of collection being completely ignored by the `wacom_usage_mapping` >> function, preventing the later '*_event' functions from being notified about >> changes to their value. >> >> Fixes: c9c095874a ("HID: wacom: generic: Support and use 'Custom HID' mode and usages") >> Fixes: ac2423c975 ("HID: wacom: generic: add vendor defined touch") >> Cc: stable(a)vger.kernel.org >> Signed-off-by: Jason Gerecke <jason.gerecke(a)wacom.com> > > Applied to for-4.14/upstream-fixes > > -- > Jiri Kosina > SUSE Labs > Was this branch ever sent to Linus? I don't see any mention of it (or this patch) in the 4.14-rc8 history... Jason --- Now instead of four in the eights place / you’ve got three, ‘Cause you added one / (That is to say, eight) to the two, / But you can’t take seven from three, / So you look at the sixty-fours....

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] [PATCH AUTOSEL for-4.4 01/39] extcon: palmas: Check the parent instance to prevent the NULL

by Levin, Alexander (Sasha Levin)

From: Roger Quadros <rogerq(a)ti.com> [ Upstream commit 9fe172b9be532acc23e35ba693700383ab775e66 ] extcon-palmas must be child of palmas and expects parent's drvdata to be valid. Check for non NULL parent drvdata and fail if it is NULL. Not doing so will result in a NULL pointer dereference later in the probe() parent drvdata is NULL (e.g. misplaced extcon-palmas node in device tree). Signed-off-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Chanwoo Choi <cw00.choi(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> --- drivers/extcon/extcon-palmas.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index 93c30a885740..aa2f6bb82b32 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -190,6 +190,11 @@ static int palmas_usb_probe(struct platform_device *pdev) struct palmas_usb *palmas_usb; int status; + if (!palmas) { + dev_err(&pdev->dev, "failed to get valid parent\n"); + return -EINVAL; + } + palmas_usb = devm_kzalloc(&pdev->dev, sizeof(*palmas_usb), GFP_KERNEL); if (!palmas_usb) return -ENOMEM; -- 2.11.0

7 years, 8 months

2
40
0 0

[Linux-stable-mirror] [PATCH] usb: f_fs: Drop check on Reserved1 field on OS_DESC_EXT_COMPAT

by John Keeping

This check has gone through several incompatible variations in commits 53642399aa71 ("usb: gadget: f_fs: Fix wrong check on reserved1 of OS_DESC_EXT_COMPAT"), 354bc45bf329 ("usb: gadget: f_fs: Fix ExtCompat descriptor validation") and 3ba534df815f ("Revert "usb: gadget: f_fs: Fix ExtCompat descriptor validation"") after initially being introduced in commit f0175ab51993 ("usb: gadget: f_fs: OS descriptors support"). The various changes make it impossible for a single userspace implementation to work with different kernel versions, so let's just drop the condition to avoid breaking userspace. Fixes: 53642399aa71 ("usb: gadget: f_fs: Fix wrong check on reserved1 of OS_DESC_EXT_COMPAT") Cc: stable(a)vger.kernel.org # v4.7+ Signed-off-by: John Keeping <john(a)metanate.com> --- drivers/usb/gadget/function/f_fs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 652397eda6d6..0d9962834345 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2282,8 +2282,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, int i; if (len < sizeof(*d) || - d->bFirstInterfaceNumber >= ffs->interfaces_count || - !d->Reserved1) + d->bFirstInterfaceNumber >= ffs->interfaces_count) return -EINVAL; for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i) if (d->Reserved2[i]) -- 2.15.0

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] [PATCH v2 1/6] drm/i915: Update watermark state correctly in sanitize_watermarks

by Maarten Lankhorst

We no longer use intel_crtc->wm.active for watermarks any more, which was incorrect. But this uncovered a bug in sanitize_watermarks(), which meant that we wrote the correct watermarks, but the next update would still use the wrong hw watermarks for calculating. This caused all further updates to fail with -EINVAL and the log would reveal an error like the one below: [ 10.043902] [drm:ilk_validate_wm_level.part.8 [i915]] Sprite WM0 too large 56 (max 0) [ 10.043960] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid [ 10.044030] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible Signed-off-by: Maarten Lankhorst <maarten.lankhorst(a)linux.intel.com> Fixes: b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.") Cc: stable(a)vger.kernel.org #v4.8+ --- drivers/gpu/drm/i915/intel_display.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 84817ccc5305..17665ee06c9a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -14442,6 +14442,8 @@ static void sanitize_watermarks(struct drm_device *dev) cs->wm.need_postvbl_update = true; dev_priv->display.optimize_watermarks(intel_state, cs); + + to_intel_crtc_state(crtc->state)->wm = cs->wm; } put_state: -- 2.15.0

7 years, 8 months

1
0
0 0

Re: [Linux-stable-mirror] Patch "ASoC: sunxi: Add bindings for sun8i to SPDIF" has been added to the 4.9-stable tree

by Levin, Alexander (Sasha Levin)

On Thu, Nov 09, 2017 at 11:07:44AM +0000, Mark Brown wrote: >On Thu, Nov 09, 2017 at 10:09:10AM +0100, gregkh(a)linuxfoundation.org wrote: > >> This is a note to let you know that I've just added the patch titled >> >> ASoC: sunxi: Add bindings for sun8i to SPDIF > >> The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the >> transmit fifo is at a different address. > >This doesn't seem like a good idea - note how the changelog says that >the transmit FIFO is at a different address, I'd expect this means that >people won't be able to use the new compatible without a corresponding >code change. Interesting. I keep trying to automate DT patch selection to deal with issues as this, but it seems like there is always something... I agree with Mark. I think it would make sense to pick 1bd92af877 as well to deal with this issue. -- Thanks, Sasha

7 years, 8 months

1
0
0 0

Re: [Linux-stable-mirror] [PATCH 3.16 000/294] 3.16.50-rc1 review

by Guenter Roeck

On Thu, Nov 09, 2017 at 12:40:36PM +0000, Ben Hutchings wrote: > On Thu, 2017-11-09 at 13:21 +0100, Arnd Bergmann wrote: > > On Thu, Nov 9, 2017 at 1:08 PM, Greg KH <greg(a)kroah.com> wrote: > > > On Thu, Nov 09, 2017 at 12:55:30PM +0100, Arnd Bergmann wrote: > [...] > > > > I think if you upload the branch to the stable-rc git, that should produce > > > > the automated build and boot results via email or via the > > > > https://kernelci.org/job/ interface. Once there are some results > > > > there, I'll go through the list once more to see what warnings > > > > and failures remain. > > > > > > I don't know of a way to have others push to that tree/branch at the > > > moment :( > > > > > > I'll go update that branch now... > > > > Thanks! > > > > With the arm-soc tree, we simply have a shared group-id on > > gitolite.kernel.org and everyone in that group can push to it. > > > > If that is the only thing you need, it should be trivial to let Ben > > and Sasha push to /pub/scm/linux/kernel/git/stable/*.git as well, > > I'm sure helpdesk(a)kernel.org can arrange that. Of course if you are > > worried about having multiple accounts with write access to all the > > branches, then that wouldn't be enough. > > I think I'd rather send a pull request to Greg at the start of the > review period. > If you change the trees I am supposed to pull from for my builders, please let me know. Guenter

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] [PATCH] drm/fsl-dcu: set DPMS off before initializing connector

by Stefan Agner

Since commit 4a97a3da420b ("drm: Don't update property values for atomic drivers") atomic drivers must not update property values as properties are read from the state instead. To catch remaining users, the drm_object_property_set_value() function now throws a warning when called by atomic drivers on non-immutable properties, and we hit that warning when creating connectors. The easy fix is to just remove the drm_object_property_set_value() as it is used here to set the initial value of the connector's DPMS property to OFF. The DPMS property applies on top of the connector's state crtc pointer (initialized to NULL) that is the main connector on/off control, and should thus default to ON. Fixes: 4a97a3da420b ("drm: Don't update property values for atomic drivers") Cc: stable(a)vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Signed-off-by: Stefan Agner <stefan(a)agner.ch> --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c index edd7d8127d19..c54806d08dd7 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c @@ -102,7 +102,6 @@ static int fsl_dcu_attach_panel(struct fsl_dcu_drm_device *fsl_dev, { struct drm_encoder *encoder = &fsl_dev->encoder; struct drm_connector *connector = &fsl_dev->connector.base; - struct drm_mode_config *mode_config = &fsl_dev->drm->mode_config; int ret; fsl_dev->connector.encoder = encoder; @@ -122,10 +121,6 @@ static int fsl_dcu_attach_panel(struct fsl_dcu_drm_device *fsl_dev, if (ret < 0) goto err_sysfs; - drm_object_property_set_value(&connector->base, - mode_config->dpms_property, - DRM_MODE_DPMS_OFF); - ret = drm_panel_attach(panel, connector); if (ret) { dev_err(fsl_dev->dev, "failed to attach panel\n"); -- 2.14.2

7 years, 8 months

2
2
0 0

[Linux-stable-mirror] patch "USB: usbfs: compute urb->actual_length for isochronous" added to usb-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: usbfs: compute urb->actual_length for isochronous to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From 2ef47001b3ee3ded579b7532ebdcf8680e4d8c54 Mon Sep 17 00:00:00 2001 From: Alan Stern <stern(a)rowland.harvard.edu> Date: Wed, 8 Nov 2017 12:23:17 -0500 Subject: USB: usbfs: compute urb->actual_length for isochronous The USB kerneldoc says that the actual_length field "is read in non-iso completion functions", but the usbfs driver uses it for all URB types in processcompl(). Since not all of the host controller drivers set actual_length for isochronous URBs, programs using usbfs with some host controllers don't work properly. For example, Minas reports that a USB camera controlled by libusb doesn't work properly with a dwc2 controller. It doesn't seem worthwhile to change the HCDs and the documentation, since the in-kernel USB class drivers evidently don't rely on actual_length for isochronous transfers. The easiest solution is for usbfs to calculate the actual_length value for itself, by adding up the lengths of the individual packets in an isochronous transfer. Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu> CC: Minas Harutyunyan <Minas.Harutyunyan(a)synopsys.com> Reported-and-tested-by: wlf <wulf(a)rock-chips.com> CC: <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/devio.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index c3aaafc25a04..2edb4e7b2ab8 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1820,6 +1820,18 @@ static int proc_unlinkurb(struct usb_dev_state *ps, void __user *arg) return 0; } +static void compute_isochronous_actual_length(struct urb *urb) +{ + unsigned int i; + + if (urb->number_of_packets > 0) { + urb->actual_length = 0; + for (i = 0; i < urb->number_of_packets; i++) + urb->actual_length += + urb->iso_frame_desc[i].actual_length; + } +} + static int processcompl(struct async *as, void __user * __user *arg) { struct urb *urb = as->urb; @@ -1827,6 +1839,7 @@ static int processcompl(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; + compute_isochronous_actual_length(urb); if (as->userbuffer && urb->actual_length) { if (copy_urb_data_to_user(as->userbuffer, urb)) goto err_out; @@ -1995,6 +2008,7 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; + compute_isochronous_actual_length(urb); if (as->userbuffer && urb->actual_length) { if (copy_urb_data_to_user(as->userbuffer, urb)) return -EFAULT; -- 2.15.0

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] v4.1.46 build: 0 failures 33 warnings (v4.1.46)

by Build bot for Mark Brown

Tree/Branch: v4.1.46 Git describe: v4.1.46 Commit: 200d858d94 Linux 4.1.46 Build Time: 60 min 3 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 33 Section Mismatches: 1 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 22 warnings 3 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-multi_v7_defconfig 23 warnings 0 mismatches : arm-allmodconfig 2 warnings 0 mismatches : arm-multi_v5_defconfig 6 warnings 0 mismatches : x86_64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 33 8 ../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast 5 ../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool] 2 ../sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 ../include/linux/ftrace.h:671:36: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] 2 ../drivers/scsi/qla2xxx/qla_target.c:3086:6: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 8 has type 'uint32_t {aka unsigned int}' [-Wformat=] 2 ../drivers/scsi/qla2xxx/qla_target.c:3083:17: warning: unused variable 'se_cmd' [-Wunused-variable] 2 ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] 2 ../drivers/scsi/be2iscsi/be_main.c:3168:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 ../drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 ../drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 ../drivers/ata/pata_hpt366.c:382:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 2 ../drivers/ata/pata_hpt366.c:379:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 2 ../drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 ../include/trace/ftrace.h:28:0: warning: "TRACE_SYSTEM_STRING" redefined 1 ../drivers/usb/renesas_usbhs/common.c:492:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../drivers/rtc/rtc-pcf8563.c:444:5: warning: 'alm_pending' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/rtc/rtc-armada38x.c:91:22: warning: unused variable 'flags' [-Wunused-variable] 1 ../drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/net/ethernet/dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined [-Wcpp] 1 ../drivers/net/ethernet/dec/tulip/tulip_core.c:101:2: warning: #warning Processor architecture undefined! [-Wcpp] 1 ../drivers/mmc/host/sh_mmcif.c:402:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/mmc/host/sh_mmcif.c:401:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/media/platform/coda/./trace.h:12:0: warning: "TRACE_SYSTEM_STRING" redefined 1 ../drivers/iommu/intel-iommu.c:3798:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 1 ../drivers/iommu/dmar.c:1849:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 1 ../drivers/infiniband/hw/qib/qib_qp.c:44:0: warning: "BITS_PER_PAGE" redefined 1 ../drivers/infiniband/hw/cxgb4/mem.c:147:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../drivers/hid/hid-input.c:1163:67: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 1 ../drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgm204.c:975:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/gpio/gpio-74xx-mmio.c:132:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../arch/x86/include/asm/msr.h:209:23: warning: right shift count >= width of type [-Wshift-count-overflow] 1 ../arch/arm/mach-cns3xxx/pcie.c:266:1: warning: the frame size of 1088 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../arch/arm/include/asm/cmpxchg.h:205:3: warning: value computed is not used [-Wunused-value] Section Mismatch Summary: 1 3 WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x168): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit() =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 22 warnings, 3 section mismatches Warnings: ../drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../drivers/ata/pata_hpt366.c:379:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../drivers/ata/pata_hpt366.c:382:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/gpio/gpio-74xx-mmio.c:132:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ../drivers/infiniband/hw/qib/qib_qp.c:44:0: warning: "BITS_PER_PAGE" redefined ../drivers/mmc/host/sh_mmcif.c:401:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/mmc/host/sh_mmcif.c:402:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool] ../drivers/net/ethernet/dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined [-Wcpp] ../drivers/net/ethernet/dec/tulip/tulip_core.c:101:2: warning: #warning Processor architecture undefined! [-Wcpp] ../drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/scsi/be2iscsi/be_main.c:3168:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/scsi/qla2xxx/qla_target.c:3086:6: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 8 has type 'uint32_t {aka unsigned int}' [-Wformat=] ../drivers/scsi/qla2xxx/qla_target.c:3083:17: warning: unused variable 'se_cmd' [-Wunused-variable] ../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] ../drivers/usb/renesas_usbhs/common.c:492:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Section Mismatches: WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x168): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit() WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x168): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit() WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x168): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit() ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool] ../drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 23 warnings, 0 section mismatches Warnings: ../arch/arm/mach-cns3xxx/pcie.c:266:1: warning: the frame size of 1088 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../arch/arm/include/asm/cmpxchg.h:205:3: warning: value computed is not used [-Wunused-value] ../drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../drivers/ata/pata_hpt366.c:379:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../drivers/ata/pata_hpt366.c:382:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] ../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool] ../sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgm204.c:975:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/infiniband/hw/cxgb4/mem.c:147:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool] ../include/trace/ftrace.h:28:0: warning: "TRACE_SYSTEM_STRING" redefined ../drivers/media/platform/coda/./trace.h:12:0: warning: "TRACE_SYSTEM_STRING" redefined ../drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/rtc/rtc-armada38x.c:91:22: warning: unused variable 'flags' [-Wunused-variable] ../drivers/scsi/be2iscsi/be_main.c:3168:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/scsi/qla2xxx/qla_target.c:3086:6: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 8 has type 'uint32_t {aka unsigned int}' [-Wformat=] ../drivers/scsi/qla2xxx/qla_target.c:3083:17: warning: unused variable 'se_cmd' [-Wunused-variable] ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] ../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast ../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool] ../drivers/rtc/rtc-pcf8563.c:444:5: warning: 'alm_pending' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: ../include/linux/ftrace.h:671:36: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] ../include/linux/ftrace.h:671:36: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] ../arch/x86/include/asm/msr.h:209:23: warning: right shift count >= width of type [-Wshift-count-overflow] ../drivers/hid/hid-input.c:1163:67: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] ../drivers/iommu/dmar.c:1849:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] ../drivers/iommu/intel-iommu.c:3798:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig arm64-defconfig

7 years, 8 months

1
0
0 0

Re: [Linux-stable-mirror] [PATCH 3.16 000/294] 3.16.50-rc1 review

by Arnd Bergmann

On Tue, Nov 7, 2017 at 12:02 AM, Ben Hutchings <ben(a)decadent.org.uk> wrote: > This is the start of the stable review cycle for the 3.16.50 release. > There are 294 patches in this series, which will be posted as responses > to this one. If anyone has any issues with these being applied, please > let me know. > > Responses should be made by Fri Nov 08 18:00:00 UTC 2017. > Anything received after that time might be too late. > > A combined patch relative to 3.16.49 will be posted as an additional > response to this. A shortlog and diffstat can be found below. I haven'tr tried building the proposed patches so far, as I was waiting for the kernelci builds. However, I see that the stable-rc/linux-3.16.y doesn't have the current set, it still points to the old 3.16.35 release from last year. I think if you upload the branch to the stable-rc git, that should produce the automated build and boot results via email or via the https://kernelci.org/job/ interface. Once there are some results there, I'll go through the list once more to see what warnings and failures remain. I'm not in a hurry to fix the old warnings, and can do that pass after the 3.16 release is out on git and in kernelci, but it would help to see if the bots has caught any regressions. Arnd

7 years, 8 months

2
2
0 0

[Linux-stable-mirror] patch "USB: usbfs: compute urb->actual_length for isochronous" added to usb-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: usbfs: compute urb->actual_length for isochronous to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the usb-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. >From 2ef47001b3ee3ded579b7532ebdcf8680e4d8c54 Mon Sep 17 00:00:00 2001 From: Alan Stern <stern(a)rowland.harvard.edu> Date: Wed, 8 Nov 2017 12:23:17 -0500 Subject: USB: usbfs: compute urb->actual_length for isochronous The USB kerneldoc says that the actual_length field "is read in non-iso completion functions", but the usbfs driver uses it for all URB types in processcompl(). Since not all of the host controller drivers set actual_length for isochronous URBs, programs using usbfs with some host controllers don't work properly. For example, Minas reports that a USB camera controlled by libusb doesn't work properly with a dwc2 controller. It doesn't seem worthwhile to change the HCDs and the documentation, since the in-kernel USB class drivers evidently don't rely on actual_length for isochronous transfers. The easiest solution is for usbfs to calculate the actual_length value for itself, by adding up the lengths of the individual packets in an isochronous transfer. Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu> CC: Minas Harutyunyan <Minas.Harutyunyan(a)synopsys.com> Reported-and-tested-by: wlf <wulf(a)rock-chips.com> CC: <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/devio.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index c3aaafc25a04..2edb4e7b2ab8 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1820,6 +1820,18 @@ static int proc_unlinkurb(struct usb_dev_state *ps, void __user *arg) return 0; } +static void compute_isochronous_actual_length(struct urb *urb) +{ + unsigned int i; + + if (urb->number_of_packets > 0) { + urb->actual_length = 0; + for (i = 0; i < urb->number_of_packets; i++) + urb->actual_length += + urb->iso_frame_desc[i].actual_length; + } +} + static int processcompl(struct async *as, void __user * __user *arg) { struct urb *urb = as->urb; @@ -1827,6 +1839,7 @@ static int processcompl(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; + compute_isochronous_actual_length(urb); if (as->userbuffer && urb->actual_length) { if (copy_urb_data_to_user(as->userbuffer, urb)) goto err_out; @@ -1995,6 +2008,7 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; + compute_isochronous_actual_length(urb); if (as->userbuffer && urb->actual_length) { if (copy_urb_data_to_user(as->userbuffer, urb)) return -EFAULT; -- 2.15.0

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] test

by Benjamin Copeland

test

7 years, 8 months

1
0
0 0

Re: [Linux-stable-mirror] [PATCH 1/1] ovl: Put upperdentry if ovl_check_origin() fails

by Vivek Goyal

On Wed, Nov 01, 2017 at 03:37:22PM -0400, Vivek Goyal wrote: > If ovl_check_origin() fails, we should put upperdentry. We have a reference > on it by now. So goto out_put_upper instead of out. > > Fixes: a9d019573e88 ("ovl: lookup non-dir copy-up-origin by file handle") > Cc: <stable(a)vger.kernel.org> #4.12 > Signed-off-by: Vivek Goyal <vgoyal(a)redhat.com> Hi Amir, Miklos, Does this patch look fine? I think its a simple bug fix and should go in 4.15. Vivek > --- > fs/overlayfs/namei.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c > index a12dc10bf726..bc6d5c5a3443 100644 > --- a/fs/overlayfs/namei.c > +++ b/fs/overlayfs/namei.c > @@ -630,7 +630,7 @@ struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, > err = ovl_check_origin(upperdentry, roe->lowerstack, > roe->numlower, &stack, &ctr); > if (err) > - goto out; > + goto out_put_upper; > } > > if (d.redirect) { > -- > 2.13.6 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-unionfs" in > the body of a message to majordomo(a)vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html

7 years, 8 months

3
2
0 0

[Linux-stable-mirror] Patch "xen/netback: set default upper limit of tx/rx queues to 8" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xen/netback: set default upper limit of tx/rx queues to 8 to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xen-netback-set-default-upper-limit-of-tx-rx-queues-to-8.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: Juergen Gross <jgross(a)suse.com> Date: Tue, 10 Jan 2017 14:32:52 +0100 Subject: xen/netback: set default upper limit of tx/rx queues to 8 From: Juergen Gross <jgross(a)suse.com> [ Upstream commit 56dd5af9bc23d0d5d23bb207c477715b4c2216c5 ] The default for the maximum number of tx/rx queues of one interface is the number of cpus of the system today. As each queue pair reserves 512 grant pages this default consumes a ridiculous number of grants for large guests. Limit the queue number to 8 as default. This value can be modified via a module parameter if required. Signed-off-by: Juergen Gross <jgross(a)suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/xen-netback/netback.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -67,6 +67,7 @@ module_param(rx_drain_timeout_msecs, uin unsigned int rx_stall_timeout_msecs = 60000; module_param(rx_stall_timeout_msecs, uint, 0444); +#define MAX_QUEUES_DEFAULT 8 unsigned int xenvif_max_queues; module_param_named(max_queues, xenvif_max_queues, uint, 0644); MODULE_PARM_DESC(max_queues, @@ -2189,11 +2190,12 @@ static int __init netback_init(void) if (!xen_domain()) return -ENODEV; - /* Allow as many queues as there are CPUs if user has not + /* Allow as many queues as there are CPUs but max. 8 if user has not * specified a value. */ if (xenvif_max_queues == 0) - xenvif_max_queues = num_online_cpus(); + xenvif_max_queues = min_t(unsigned int, MAX_QUEUES_DEFAULT, + num_online_cpus()); if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) { pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n", Patches currently in stable-queue which might be from jgross(a)suse.com are queue-3.18/xen-netback-set-default-upper-limit-of-tx-rx-queues-to-8.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "video: fbdev: pmag-ba-fb: Remove bad `__init' annotation" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled video: fbdev: pmag-ba-fb: Remove bad `__init' annotation to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: video-fbdev-pmag-ba-fb-remove-bad-__init-annotation.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: "Maciej W. Rozycki" <macro(a)linux-mips.org> Date: Mon, 30 Jan 2017 17:39:48 +0100 Subject: video: fbdev: pmag-ba-fb: Remove bad `__init' annotation From: "Maciej W. Rozycki" <macro(a)linux-mips.org> [ Upstream commit 879e5a0df626f39cbb3c61bb90373e56d67012c4 ] Fix: WARNING: drivers/video/fbdev/pmag-ba-fb.o(.text+0x308): Section mismatch in reference from the function pmagbafb_probe() to the function .init.text:pmagbafb_erase_cursor() The function pmagbafb_probe() references the function __init pmagbafb_erase_cursor(). This is often because pmagbafb_probe lacks a __init annotation or the annotation of pmagbafb_erase_cursor is wrong. -- a fallout from a missed update from commit 9625b51350cc ("VIDEO: PMAG-BA: Fix section mismatch") and then commit 48c68c4f1b54 ("Drivers: video: remove __dev* attributes.") Signed-off-by: Maciej W. Rozycki <macro(a)linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/pmag-ba-fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/video/fbdev/pmag-ba-fb.c +++ b/drivers/video/fbdev/pmag-ba-fb.c @@ -129,7 +129,7 @@ static struct fb_ops pmagbafb_ops = { /* * Turn the hardware cursor off. */ -static void __init pmagbafb_erase_cursor(struct fb_info *info) +static void pmagbafb_erase_cursor(struct fb_info *info) { struct pmagbafb_par *par = info->par; Patches currently in stable-queue which might be from macro(a)linux-mips.org are queue-3.18/video-fbdev-pmag-ba-fb-remove-bad-__init-annotation.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "usb: hcd: initialize hcd->flags to 0 when rm hcd" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: hcd: initialize hcd->flags to 0 when rm hcd to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-hcd-initialize-hcd-flags-to-0-when-rm-hcd.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: William wu <wulf(a)rock-chips.com> Date: Fri, 13 Jan 2017 11:04:22 +0800 Subject: usb: hcd: initialize hcd->flags to 0 when rm hcd From: William wu <wulf(a)rock-chips.com> [ Upstream commit 76b8db0d480e8045e1a1902fc9ab143b3b9ef115 ] On some platforms(e.g. rk3399 board), we can call hcd_add/remove consecutively without calling usb_put_hcd/usb_create_hcd in between, so hcd->flags can be stale. If the HC dies due to whatever reason then without this patch we get the below error on next hcd_add. [173.296154] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up [173.296209] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [173.296762] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 [173.296931] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [173.297179] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [173.297203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [173.297222] usb usb6: Product: xHCI Host Controller [173.297240] usb usb6: Manufacturer: Linux 4.4.21 xhci-hcd [173.297257] usb usb6: SerialNumber: xhci-hcd.2.auto [173.298680] hub 6-0:1.0: USB hub found [173.298749] hub 6-0:1.0: 1 port detected [173.299382] rockchip-dwc3 usb@fe800000: USB HOST connected [173.395418] hub 5-0:1.0: activate --> -19 [173.603447] irq 228: nobody cared (try booting with the "irqpoll" option) [173.603493] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.21 #9 [173.603513] Hardware name: Google Kevin (DT) [173.603531] Call trace: [173.603568] [<ffffffc0002087dc>] dump_backtrace+0x0/0x160 [173.603596] [<ffffffc00020895c>] show_stack+0x20/0x28 [173.603623] [<ffffffc0004b28a8>] dump_stack+0x90/0xb0 [173.603650] [<ffffffc00027347c>] __report_bad_irq+0x48/0xe8 [173.603674] [<ffffffc0002737cc>] note_interrupt+0x1e8/0x28c [173.603698] [<ffffffc000270a38>] handle_irq_event_percpu+0x1d4/0x25c [173.603722] [<ffffffc000270b0c>] handle_irq_event+0x4c/0x7c [173.603748] [<ffffffc00027456c>] handle_fasteoi_irq+0xb4/0x124 [173.603777] [<ffffffc00026fe3c>] generic_handle_irq+0x30/0x44 [173.603804] [<ffffffc0002701a8>] __handle_domain_irq+0x90/0xbc [173.603827] [<ffffffc0002006f4>] gic_handle_irq+0xcc/0x188 ... [173.604500] [<ffffffc000203700>] el1_irq+0x80/0xf8 [173.604530] [<ffffffc000261388>] cpu_startup_entry+0x38/0x3cc [173.604558] [<ffffffc00090f7d8>] rest_init+0x8c/0x94 [173.604585] [<ffffffc000e009ac>] start_kernel+0x3d0/0x3fc [173.604607] [<0000000000b16000>] 0xb16000 [173.604622] handlers: [173.604648] [<ffffffc000642084>] usb_hcd_irq [173.604673] Disabling IRQ #228 Signed-off-by: William wu <wulf(a)rock-chips.com> Acked-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/hcd.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2927,6 +2927,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) } usb_put_invalidate_rhdev(hcd); + hcd->flags = 0; } EXPORT_SYMBOL_GPL(usb_remove_hcd); Patches currently in stable-queue which might be from wulf(a)rock-chips.com are queue-3.18/usb-hcd-initialize-hcd-flags-to-0-when-rm-hcd.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "serial: sh-sci: Fix register offsets for the IRDA serial port" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sh-sci: Fix register offsets for the IRDA serial port to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Date: Wed, 11 Jan 2017 16:43:32 +0200 Subject: serial: sh-sci: Fix register offsets for the IRDA serial port From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> [ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ] Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the registers offset in the driver and the platform data regshift value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 - drivers/tty/serial/sh-sci.c | 17 ++++++++--------- 2 files changed, 8 insertions(+), 10 deletions(-) --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -165,7 +165,6 @@ static struct plat_sci_port scif2_platfo .scscr = SCSCR_TE | SCSCR_RE, .type = PORT_IRDA, .ops = &sh770x_sci_port_ops, - .regshift = 1, }; static struct resource scif2_resources[] = { --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -171,18 +171,17 @@ static struct plat_sci_reg sci_regmap[SC }, /* - * Common definitions for legacy IrDA ports, dependent on - * regshift value. + * Common definitions for legacy IrDA ports. */ [SCIx_IRDA_REGTYPE] = { [SCSMR] = { 0x00, 8 }, - [SCBRR] = { 0x01, 8 }, - [SCSCR] = { 0x02, 8 }, - [SCxTDR] = { 0x03, 8 }, - [SCxSR] = { 0x04, 8 }, - [SCxRDR] = { 0x05, 8 }, - [SCFCR] = { 0x06, 8 }, - [SCFDR] = { 0x07, 16 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, [SCTFDR] = sci_reg_invalid, [SCRFDR] = sci_reg_invalid, [SCSPTR] = sci_reg_invalid, Patches currently in stable-queue which might be from laurent.pinchart+renesas(a)ideasonboard.com are queue-3.18/serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "phy: increase size of MII_BUS_ID_SIZE and bus_id" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled phy: increase size of MII_BUS_ID_SIZE and bus_id to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: phy-increase-size-of-mii_bus_id_size-and-bus_id.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> Date: Thu, 19 Jan 2017 17:05:04 +0100 Subject: phy: increase size of MII_BUS_ID_SIZE and bus_id From: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> [ Upstream commit 4567d686f5c6d955e57a3afa1741944c1e7f4033 ] Some bus names are pretty long and do not fit into 17 chars. Increase therefore MII_BUS_ID_SIZE and phy_fixup.bus_id to larger number. Now mii_bus.id can host larger name. Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> Signed-off-by: Magnus Öberg <magnus.oberg(a)westermo.se> Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/phy.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -135,11 +135,7 @@ static inline const char *phy_modes(phy_ /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ #define PHY_ID_FMT "%s:%02x" -/* - * Need to be a little smaller than phydev->dev.bus_id to leave room - * for the ":%02x" - */ -#define MII_BUS_ID_SIZE (20 - 3) +#define MII_BUS_ID_SIZE 61 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ @@ -573,7 +569,7 @@ struct phy_driver { /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; - char bus_id[20]; + char bus_id[MII_BUS_ID_SIZE + 3]; u32 phy_uid; u32 phy_uid_mask; int (*run)(struct phy_device *phydev); Patches currently in stable-queue which might be from volodymyr.bendiuga(a)gmail.com are queue-3.18/phy-increase-size-of-mii_bus_id_size-and-bus_id.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "IPsec: do not ignore crypto err in ah4 input" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IPsec: do not ignore crypto err in ah4 input to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipsec-do-not-ignore-crypto-err-in-ah4-input.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: Gilad Ben-Yossef <gilad(a)benyossef.com> Date: Mon, 16 Jan 2017 13:17:55 +0200 Subject: IPsec: do not ignore crypto err in ah4 input From: Gilad Ben-Yossef <gilad(a)benyossef.com> [ Upstream commit ebd89a2d0675f1325c2be5b7576fd8cb7e8defd0 ] ah4 input processing uses the asynchronous hash crypto API which supplies an error code as part of the operation completion but the error code was being ignored. Treat a crypto API error indication as a verification failure. While a crypto API reported error would almost certainly result in a memcpy of the digest failing anyway and thus the security risk seems minor, performing a memory compare on what might be uninitialized memory is wrong. Signed-off-by: Gilad Ben-Yossef <gilad(a)benyossef.com> Signed-off-by: Steffen Klassert <steffen.klassert(a)secunet.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/ah4.c | 3 +++ 1 file changed, 3 insertions(+) --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -270,6 +270,9 @@ static void ah_input_done(struct crypto_ int ihl = ip_hdrlen(skb); int ah_hlen = (ah->hdrlen + 2) << 2; + if (err) + goto out; + work_iph = AH_SKB_CB(skb)->tmp; auth_data = ah_tmp_auth(work_iph, ihl); icv = ah_tmp_icv(ahp->ahash, auth_data, ahp->icv_trunc_len); Patches currently in stable-queue which might be from gilad(a)benyossef.com are queue-3.18/ipsec-do-not-ignore-crypto-err-in-ah4-input.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "Input: mpr121 - set missing event capability" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: mpr121 - set missing event capability to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-mpr121-set-missing-event-capability.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: Akinobu Mita <akinobu.mita(a)gmail.com> Date: Sun, 15 Jan 2017 14:44:05 -0800 Subject: Input: mpr121 - set missing event capability From: Akinobu Mita <akinobu.mita(a)gmail.com> [ Upstream commit 9723ddc8fe0d76ce41fe0dc16afb241ec7d0a29d ] This driver reports misc scan input events on the sensor's status register changes. But the event capability for them was not set in the device initialization, so these events were ignored. This change adds the missing event capability. Signed-off-by: Akinobu Mita <akinobu.mita(a)gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/keyboard/mpr121_touchkey.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/input/keyboard/mpr121_touchkey.c +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -235,6 +235,7 @@ static int mpr_touchkey_probe(struct i2c input_dev->id.bustype = BUS_I2C; input_dev->dev.parent = &client->dev; input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); input_dev->keycode = mpr121->keycodes; input_dev->keycodesize = sizeof(mpr121->keycodes[0]); Patches currently in stable-queue which might be from akinobu.mita(a)gmail.com are queue-3.18/input-mpr121-set-missing-event-capability.patch queue-3.18/input-mpr121-handle-multiple-bits-change-of-status-register.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "Input: mpr121 - handle multiple bits change of status register" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: mpr121 - handle multiple bits change of status register to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-mpr121-handle-multiple-bits-change-of-status-register.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: Akinobu Mita <akinobu.mita(a)gmail.com> Date: Sun, 15 Jan 2017 14:44:30 -0800 Subject: Input: mpr121 - handle multiple bits change of status register From: Akinobu Mita <akinobu.mita(a)gmail.com> [ Upstream commit 08fea55e37f58371bffc5336a59e55d1f155955a ] This driver reports input events on their interrupts which are triggered by the sensor's status register changes. But only single bit change is reported in the interrupt handler. So if there are multiple bits are changed at almost the same time, other press or release events are ignored. This fixes it by detecting all changed bits in the status register. Signed-off-by: Akinobu Mita <akinobu.mita(a)gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/keyboard/mpr121_touchkey.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) --- a/drivers/input/keyboard/mpr121_touchkey.c +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -87,7 +87,8 @@ static irqreturn_t mpr_touchkey_interrup struct mpr121_touchkey *mpr121 = dev_id; struct i2c_client *client = mpr121->client; struct input_dev *input = mpr121->input_dev; - unsigned int key_num, key_val, pressed; + unsigned long bit_changed; + unsigned int key_num; int reg; reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR); @@ -105,18 +106,22 @@ static irqreturn_t mpr_touchkey_interrup reg &= TOUCH_STATUS_MASK; /* use old press bit to figure out which bit changed */ - key_num = ffs(reg ^ mpr121->statusbits) - 1; - pressed = reg & (1 << key_num); + bit_changed = reg ^ mpr121->statusbits; mpr121->statusbits = reg; + for_each_set_bit(key_num, &bit_changed, mpr121->keycount) { + unsigned int key_val, pressed; - key_val = mpr121->keycodes[key_num]; + pressed = reg & BIT(key_num); + key_val = mpr121->keycodes[key_num]; - input_event(input, EV_MSC, MSC_SCAN, key_num); - input_report_key(input, key_val, pressed); - input_sync(input); + input_event(input, EV_MSC, MSC_SCAN, key_num); + input_report_key(input, key_val, pressed); + + dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, + pressed ? "pressed" : "released"); - dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, - pressed ? "pressed" : "released"); + } + input_sync(input); out: return IRQ_HANDLED; Patches currently in stable-queue which might be from akinobu.mita(a)gmail.com are queue-3.18/input-mpr121-set-missing-event-capability.patch queue-3.18/input-mpr121-handle-multiple-bits-change-of-status-register.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "iio: trigger: free trigger resource correctly" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: trigger: free trigger resource correctly to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iio-trigger-free-trigger-resource-correctly.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: Alison Schofield <amsfield22(a)gmail.com> Date: Thu, 19 Jan 2017 19:47:38 -0800 Subject: iio: trigger: free trigger resource correctly From: Alison Schofield <amsfield22(a)gmail.com> [ Upstream commit 10e840dfb0b7fc345082dd9e5fff3c1c02e7690e ] These stand-alone trigger drivers were using iio_trigger_put() where they should have been using iio_trigger_free(). The iio_trigger_put() adds a module_put which is bad since they never did a module_get. In the sysfs driver, module_get/put's are used as triggers are added & removed. This extra module_put() occurs on an error path in the probe routine (probably rare). In the bfin-timer & interrupt trigger drivers, the module resources are not explicitly managed, so it's doing a put on something that was never get'd. It occurs on the probe error path and on the remove path (not so rare). Tested with the sysfs trigger driver. The bfin & interrupt drivers were build tested & inspected only. Signed-off-by: Alison Schofield <amsfield22(a)gmail.com> Signed-off-by: Jonathan Cameron <jic23(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iio/trigger/iio-trig-interrupt.c | 8 ++++---- drivers/iio/trigger/iio-trig-sysfs.c | 2 +- drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) --- a/drivers/iio/trigger/iio-trig-interrupt.c +++ b/drivers/iio/trigger/iio-trig-interrupt.c @@ -58,7 +58,7 @@ static int iio_interrupt_trigger_probe(s trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL); if (!trig_info) { ret = -ENOMEM; - goto error_put_trigger; + goto error_free_trigger; } iio_trigger_set_drvdata(trig, trig_info); trig_info->irq = irq; @@ -83,8 +83,8 @@ error_release_irq: free_irq(irq, trig); error_free_trig_info: kfree(trig_info); -error_put_trigger: - iio_trigger_put(trig); +error_free_trigger: + iio_trigger_free(trig); error_ret: return ret; } @@ -99,7 +99,7 @@ static int iio_interrupt_trigger_remove( iio_trigger_unregister(trig); free_irq(trig_info->irq, trig); kfree(trig_info); - iio_trigger_put(trig); + iio_trigger_free(trig); return 0; } --- a/drivers/iio/trigger/iio-trig-sysfs.c +++ b/drivers/iio/trigger/iio-trig-sysfs.c @@ -173,7 +173,7 @@ static int iio_sysfs_trigger_probe(int i return 0; out2: - iio_trigger_put(t->trig); + iio_trigger_free(t->trig); free_t: kfree(t); out1: --- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c +++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c @@ -258,7 +258,7 @@ out_free_irq: out1: iio_trigger_unregister(st->trig); out: - iio_trigger_put(st->trig); + iio_trigger_free(st->trig); return ret; } @@ -271,7 +271,7 @@ static int iio_bfin_tmr_trigger_remove(s peripheral_free(st->t->pin); free_irq(st->irq, st); iio_trigger_unregister(st->trig); - iio_trigger_put(st->trig); + iio_trigger_free(st->trig); return 0; } Patches currently in stable-queue which might be from amsfield22(a)gmail.com are queue-3.18/iio-trigger-free-trigger-resource-correctly.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "IB/ipoib: Change list_del to list_del_init in the tx object" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/ipoib: Change list_del to list_del_init in the tx object to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-ipoib-change-list_del-to-list_del_init-in-the-tx-object.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: Feras Daoud <ferasda(a)mellanox.com> Date: Wed, 28 Dec 2016 14:47:28 +0200 Subject: IB/ipoib: Change list_del to list_del_init in the tx object From: Feras Daoud <ferasda(a)mellanox.com> [ Upstream commit 27d41d29c7f093f6f77843624fbb080c1b4a8b9c ] Since ipoib_cm_tx_start function and ipoib_cm_tx_reap function belong to different work queues, they can run in parallel. In this case if ipoib_cm_tx_reap calls list_del and release the lock, ipoib_cm_tx_start may acquire it and call list_del_init on the already deleted object. Changing list_del to list_del_init in ipoib_cm_tx_reap fixes the problem. Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support") Signed-off-by: Feras Daoud <ferasda(a)mellanox.com> Signed-off-by: Erez Shitrit <erezsh(a)mellanox.com> Reviewed-by: Alex Vesker <valex(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia(a)oracle.com> Signed-off-by: Doug Ledford <dledford(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1362,7 +1362,7 @@ static void ipoib_cm_tx_reap(struct work while (!list_empty(&priv->cm.reap_list)) { p = list_entry(priv->cm.reap_list.next, typeof(*p), list); - list_del(&p->list); + list_del_init(&p->list); spin_unlock_irqrestore(&priv->lock, flags); netif_tx_unlock_bh(dev); ipoib_cm_tx_destroy(p); Patches currently in stable-queue which might be from ferasda(a)mellanox.com are queue-3.18/ib-ipoib-change-list_del-to-list_del_init-in-the-tx-object.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "dt-bindings: Add vendor prefix for LEGO" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dt-bindings: Add vendor prefix for LEGO to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dt-bindings-add-vendor-prefix-for-lego.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: David Lechner <david(a)lechnology.com> Date: Fri, 13 Jan 2017 13:03:39 -0600 Subject: dt-bindings: Add vendor prefix for LEGO From: David Lechner <david(a)lechnology.com> [ Upstream commit 7dcc31e2e68a386a29070384b51683ece80982bf ] Add a vendor prefix for LEGO Systems A/S Acked-by: Rob Herring <robh(a)kernel.org> Signed-off-by: David Lechner <david(a)lechnology.com> Signed-off-by: Sekhar Nori <nsekhar(a)ti.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -83,6 +83,7 @@ karo Ka-Ro electronics GmbH keymile Keymile GmbH lacie LaCie lantiq Lantiq Semiconductor +lego LEGO Systems A/S lenovo Lenovo Group Ltd. lg LG Corporation linux Linux-specific binding Patches currently in stable-queue which might be from david(a)lechnology.com are queue-3.18/dt-bindings-add-lego-mindstorms-ev3-compatible-specification.patch queue-3.18/dt-bindings-add-vendor-prefix-for-lego.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dt-bindings-add-lego-mindstorms-ev3-compatible-specification.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: David Lechner <david(a)lechnology.com> Date: Fri, 13 Jan 2017 13:03:40 -0600 Subject: dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification From: David Lechner <david(a)lechnology.com> [ Upstream commit 21078ab174c99885ca83a5c32db0d33b1617745e ] This adds the board level device tree specification for LEGO MINDSTORMS EV3 Acked-by: Rob Herring <robh(a)kernel.org> Signed-off-by: David Lechner <david(a)lechnology.com> Signed-off-by: Sekhar Nori <nsekhar(a)ti.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/devicetree/bindings/arm/davinci.txt | 4 ++++ 1 file changed, 4 insertions(+) --- a/Documentation/devicetree/bindings/arm/davinci.txt +++ b/Documentation/devicetree/bindings/arm/davinci.txt @@ -9,6 +9,10 @@ EnBW AM1808 based CMC board Required root node properties: - compatible = "enbw,cmc", "ti,da850; +LEGO MINDSTORMS EV3 (AM1808 based) +Required root node properties: + - compatible = "lego,ev3", "ti,da850"; + Generic DaVinci Boards ---------------------- Patches currently in stable-queue which might be from david(a)lechnology.com are queue-3.18/dt-bindings-add-lego-mindstorms-ev3-compatible-specification.patch queue-3.18/dt-bindings-add-vendor-prefix-for-lego.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "drm: drm_minor_register(): Clean up debugfs on failure" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm: drm_minor_register(): Clean up debugfs on failure to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-drm_minor_register-clean-up-debugfs-on-failure.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: Noralf Trønnes <noralf(a)tronnes.org> Date: Thu, 26 Jan 2017 23:56:04 +0100 Subject: drm: drm_minor_register(): Clean up debugfs on failure From: Noralf Trønnes <noralf(a)tronnes.org> [ Upstream commit a67834f8bfa1e2f48bb27d07b9a552ba7c3af82a ] Call drm_debugfs_cleanup() in case drm_debugfs_init() fails to cover for failure in the drm_driver.debugfs_init callback. Signed-off-by: Noralf TrÃ¸nnes <noralf(a)tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter(a)ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-3-noralf@… Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/drm_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -320,7 +320,7 @@ static int drm_minor_register(struct drm ret = drm_debugfs_init(minor, minor->index, drm_debugfs_root); if (ret) { DRM_ERROR("DRM: Failed to initialize /sys/kernel/debug/dri.\n"); - return ret; + goto err_debugfs; } ret = device_add(minor->kdev); Patches currently in stable-queue which might be from noralf(a)tronnes.org are queue-3.18/drm-drm_minor_register-clean-up-debugfs-on-failure.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-omap2plus_defconfig-fix-probe-errors-on-uarts-5-and-6.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: Tony Lindgren <tony(a)atomide.com> Date: Fri, 20 Jan 2017 12:13:19 -0800 Subject: ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit 4cd6a59f5c1a9b0cca0da09fbba42b9450ffc899 ] We have more than four uarts on some SoCs and that can cause noise with errors while booting. Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -169,6 +169,7 @@ CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y Patches currently in stable-queue which might be from tony(a)atomide.com are queue-3.18/arm-omap2plus_defconfig-fix-probe-errors-on-uarts-5-and-6.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "ARM: dts: imx53-qsb-common: fix FEC pinmux config" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: imx53-qsb-common: fix FEC pinmux config to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-imx53-qsb-common-fix-fec-pinmux-config.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 10:19:57 CET 2017 From: Patrick Bruenn <p.bruenn(a)beckhoff.com> Date: Wed, 25 Jan 2017 06:25:48 +0100 Subject: ARM: dts: imx53-qsb-common: fix FEC pinmux config From: Patrick Bruenn <p.bruenn(a)beckhoff.com> [ Upstream commit 8b649e426336d7d4800ff9c82858328f4215ba01 ] The pinmux configuration in device tree was different from manual muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the bootloader already did the correct pinmuxing for us. But recently u-boot is migrating to reuse device tree files from the kernel tree, so it seems to be better to have the correct pinmuxing in our files, too. Signed-off-by: Patrick Bruenn <p.bruenn(a)beckhoff.com> Signed-off-by: Shawn Guo <shawnguo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -215,16 +215,16 @@ pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 >; }; Patches currently in stable-queue which might be from p.bruenn(a)beckhoff.com are queue-3.18/arm-dts-imx53-qsb-common-fix-fec-pinmux-config.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] [PATCH v2 01/10] staging: ccree: fix leak of import() after init()

by Gilad Ben-Yossef

crypto_ahash_import() may be called either after crypto_ahash_init() or without such call. Right now we always internally call init() as part of import(), thus leaking memory and mappings if the user has already called init() herself. Fix this by only calling init() internally if the state is not already initialized. Fixes: commit 454527d0d94f ("staging: ccree: fix hash import/export") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Gilad Ben-Yossef <gilad(a)benyossef.com> --- drivers/staging/ccree/ssi_hash.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/staging/ccree/ssi_hash.c b/drivers/staging/ccree/ssi_hash.c index d79090e..1799d3f 100644 --- a/drivers/staging/ccree/ssi_hash.c +++ b/drivers/staging/ccree/ssi_hash.c @@ -1778,9 +1778,12 @@ static int ssi_ahash_import(struct ahash_request *req, const void *in) } in += sizeof(u32); - rc = ssi_hash_init(state, ctx); - if (rc) - goto out; + /* call init() to allocate bufs if the user hasn't */ + if (!state->digest_buff) { + rc = ssi_hash_init(state, ctx); + if (rc) + goto out; + } dma_sync_single_for_cpu(dev, state->digest_buff_dma_addr, ctx->inter_digestsize, DMA_BIDIRECTIONAL); -- 2.7.4

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] [GIT PULL] commits for Linux 4.9

by Levin, Alexander (Sasha Levin)

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi Greg, Pleae pull commits for Linux 4.9 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit 5caae9d1419914177994363218616b869659e871: Linux 4.9.61 (2017-11-08 10:08:37 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git for-greg-4.9-2 for you to fetch changes up to 815f1731f39d164ba279e7835bcb985588f5a8cd: net: dsa: select NET_SWITCHDEV (2017-11-08 15:34:46 -0500) - ---------------------------------------------------------------- Akinobu Mita (2): Input: mpr121 - handle multiple bits change of status register Input: mpr121 - set missing event capability Alexander Stein (1): pinctrl: baytrail: Fix debugfs offset output Alison Schofield (4): iio: trigger: free trigger resource correctly iio: pressure: ms5611: claim direct mode during oversampling changes iio: magnetometer: mag3110: claim direct mode during raw writes iio: proximity: sx9500: claim direct mode during raw proximity reads Bart Van Assche (1): IB/rxe: Fix reference leaks in memory key invalidation code Bjorn Andersson (1): wcn36xx: Don't use the destroyed hal_mutex David Lechner (2): dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification dt-bindings: Add vendor prefix for LEGO Feras Daoud (1): IB/ipoib: Change list_del to list_del_init in the tx object Frederic Weisbecker (1): sched/cputime, powerpc32: Fix stale scaled stime on context switch Gilad Ben-Yossef (1): IPsec: do not ignore crypto err in ah4 input Harninder Rai (1): dt-bindings: clockgen: Add compatible string for LS1012A Heiko Carstens (1): s390/topology: make "topology=off" parameter work Jason Gunthorpe (1): PCI: mvebu: Handle changes to the bridge windows while enabled John Johansen (1): apparmor: fix undefined reference to `aa_g_hash_policy' Juergen Gross (1): xen/netback: set default upper limit of tx/rx queues to 8 Julian Wiedmann (1): s390/qeth: issue STARTLAN as first IPA command Lars-Peter Clausen (1): [media] adv7604: Initialize drive strength to default when using DT Laurent Pinchart (1): serial: sh-sci: Fix register offsets for the IRDA serial port Li Zhong (2): KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter crypto: vmx - disable preemption to enable vsx in aes_ctr.c Liping Zhang (1): netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family Maciej W. Rozycki (1): video: fbdev: pmag-ba-fb: Remove bad `__init' annotation Marcus Cooper (1): ASoC: sunxi: Add bindings for sun8i to SPDIF Marek Szyprowski (1): clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks Mihail Atanassov (1): drm: mali-dp: fix Lx_CONTROL register fields clobber Nate Watterson (1): iommu/arm-smmu-v3: Clear prior settings when updating STEs Noralf Trønnes (1): drm: drm_minor_register(): Clean up debugfs on failure Pan Bian (1): libertas: fix improper return value Patrice Chotard (1): ARM: dts: STiH410-family: fix wrong parent clock frequency Patrick Bruenn (1): ARM: dts: imx53-qsb-common: fix FEC pinmux config Peter Zijlstra (1): sched/core: Add missing update_rq_clock() call in sched_move_task() Rafał Miłecki (1): brcmfmac: setup wiphy bands after registering it first Stanislaw Gruszka (1): rt2800usb: mark tx failure on timeout Thomas Petazzoni (1): clk: mvebu: adjust AP806 CPU clock frequencies to production chip Tony Lindgren (1): ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 Ursula Braun (1): s390/qeth: fix retrieval of vipa and proxy-arp addresses Vaibhav Jain (1): cxl: Force psl data-cache flush during device shutdown Valentin Longchamp (1): powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 Viresh Kumar (1): PM / OPP: Error out on failing to add static OPPs for v1 bindings Vivien Didelot (1): net: dsa: select NET_SWITCHDEV Volodymyr Bendiuga (1): phy: increase size of MII_BUS_ID_SIZE and bus_id Will Deacon (1): arm64: dma-mapping: Only swizzle DMA ops for IOMMU_DOMAIN_DMA William wu (1): usb: hcd: initialize hcd->flags to 0 when rm hcd Yazen Ghannam (2): EDAC, amd64: Add x86cpuid sanity check during init EDAC, amd64: Save and return err code from probe_one_instance() Documentation/devicetree/bindings/arm/davinci.txt | 4 + .../devicetree/bindings/clock/qoriq-clock.txt | 1 + .../bindings/sound/sunxi,sun4i-spdif.txt | 1 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 ++-- arch/arm/boot/dts/stih410.dtsi | 2 +- arch/arm/configs/omap2plus_defconfig | 1 + arch/arm64/mm/dma-mapping.c | 17 +++- arch/powerpc/boot/dts/fsl/kmcoge4.dts | 4 + arch/powerpc/kernel/time.c | 1 + arch/powerpc/kvm/book3s_hv_rm_xics.c | 5 +- arch/s390/kernel/early.c | 12 +++ arch/s390/kernel/topology.c | 11 +-- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 - drivers/base/power/opp/of.c | 12 ++- drivers/clk/mvebu/ap806-system-controller.c | 28 +++++- drivers/clk/samsung/clk-exynos5433.c | 6 +- drivers/crypto/vmx/aes_ctr.c | 6 ++ drivers/edac/amd64_edac.c | 12 ++- drivers/edac/amd64_edac.h | 1 + drivers/gpu/drm/arm/malidp_planes.c | 3 +- drivers/gpu/drm/drm_drv.c | 2 +- drivers/iio/magnetometer/mag3110.c | 30 ++++-- drivers/iio/pressure/ms5611_core.c | 12 ++- drivers/iio/proximity/sx9500.c | 10 +- drivers/iio/trigger/iio-trig-interrupt.c | 8 +- drivers/iio/trigger/iio-trig-sysfs.c | 2 +- drivers/infiniband/sw/rxe/rxe_req.c | 1 + drivers/infiniband/sw/rxe/rxe_resp.c | 1 + drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 +- drivers/input/keyboard/mpr121_touchkey.c | 24 +++-- drivers/iommu/arm-smmu-v3.c | 10 +- drivers/media/i2c/adv7604.c | 3 + drivers/misc/cxl/pci.c | 3 + drivers/net/wireless/ath/wcn36xx/main.c | 3 +- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 9 +- drivers/net/wireless/marvell/libertas/cmd.c | 2 +- drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 5 +- drivers/net/xen-netback/netback.c | 6 +- drivers/pci/host/pci-mvebu.c | 101 ++++++++++++--------- drivers/pinctrl/intel/pinctrl-baytrail.c | 2 +- drivers/s390/net/qeth_core.h | 1 - drivers/s390/net/qeth_core_main.c | 21 ++++- drivers/s390/net/qeth_l2_main.c | 15 --- drivers/s390/net/qeth_l3_main.c | 15 --- drivers/s390/net/qeth_l3_sys.c | 30 +++--- drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 +- drivers/tty/serial/sh-sci.c | 17 ++-- drivers/usb/core/hcd.c | 1 + drivers/video/fbdev/pmag-ba-fb.c | 2 +- include/dt-bindings/clock/exynos5433.h | 5 +- include/linux/phy.h | 8 +- kernel/sched/core.c | 1 + net/dsa/Kconfig | 5 +- net/ipv4/ah4.c | 3 + net/netfilter/nft_meta.c | 28 +++++- security/apparmor/lsm.c | 2 +- 57 files changed, 333 insertions(+), 210 deletions(-) -----BEGIN PGP SIGNATURE----- iQIcBAEBCAAGBQJaA2ziAAoJEN6mb/eXdyzcX88P/i2q+fayJnzyfAe5EfkYZu7H PCeA7jVGtb8qxWHIMyhz/zIIo53qfatEzC/5Py4/Elo72HF6Jvsxat8/0xsV/HiT fQK24hMYk5M0M50x6FzuQqy/VFlQdrZaHnz/dqoWR6KKZT+RD112usLRa2Y8d51Y /26UqXJIflr92GzmC0/SUWtjJ/4KJsQBHCB4pVdI4m1aCyftg9P18p8rWq5n2cVA t8/znc9PwCggo7JR+AJN+DC2YmnB1dJnuNd+ilqIjwmcwgR/cDRT907v0RWV0Q4M 6PxjxdrBZZGOhUWxu+XWhr1cdjfPDLPa1g1sOhkx+qYPxMXIdGO9N7bCPbyOGd1j KT0rSmeC/QyL4VeMzUPIpc+bkLMTmt98/oVwj2LLtEtIkQ/g3XWbqKKW8hJqSHoS NnJG/Ps+8EcuBbidn4BBbIpEPyONPbjFNTUjkpIeoTGDVgJ8FQtLsNRw9C96Pogs 1hXhYQu8sWvjMycqktBN8DtCm5a4DJnu5mwSd5DfKxQlBQ+EIdVGZQudCYkogR+v +Ylam6juiM8zCLVW1tdk5p0ufC0nxYISIokAH/udTx1exU64xa4xyc/qnjqeyWWd HaE+zQK7gucWSAnkb8LO/9T21RZD9DlZSRq8BD+GD5nmtxluzyvMBlb43FtL9ftk wHXTDFBvEAO/I6s6zBm6 =3q3p -----END PGP SIGNATURE-----

7 years, 8 months

2
1
0 0

[Linux-stable-mirror] Patch "xen/netback: set default upper limit of tx/rx queues to 8" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xen/netback: set default upper limit of tx/rx queues to 8 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xen-netback-set-default-upper-limit-of-tx-rx-queues-to-8.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Juergen Gross <jgross(a)suse.com> Date: Tue, 10 Jan 2017 14:32:52 +0100 Subject: xen/netback: set default upper limit of tx/rx queues to 8 From: Juergen Gross <jgross(a)suse.com> [ Upstream commit 56dd5af9bc23d0d5d23bb207c477715b4c2216c5 ] The default for the maximum number of tx/rx queues of one interface is the number of cpus of the system today. As each queue pair reserves 512 grant pages this default consumes a ridiculous number of grants for large guests. Limit the queue number to 8 as default. This value can be modified via a module parameter if required. Signed-off-by: Juergen Gross <jgross(a)suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/xen-netback/netback.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -67,6 +67,7 @@ module_param(rx_drain_timeout_msecs, uin unsigned int rx_stall_timeout_msecs = 60000; module_param(rx_stall_timeout_msecs, uint, 0444); +#define MAX_QUEUES_DEFAULT 8 unsigned int xenvif_max_queues; module_param_named(max_queues, xenvif_max_queues, uint, 0644); MODULE_PARM_DESC(max_queues, @@ -1626,11 +1627,12 @@ static int __init netback_init(void) if (!xen_domain()) return -ENODEV; - /* Allow as many queues as there are CPUs if user has not + /* Allow as many queues as there are CPUs but max. 8 if user has not * specified a value. */ if (xenvif_max_queues == 0) - xenvif_max_queues = num_online_cpus(); + xenvif_max_queues = min_t(unsigned int, MAX_QUEUES_DEFAULT, + num_online_cpus()); if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) { pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n", Patches currently in stable-queue which might be from jgross(a)suse.com are queue-4.9/xen-netback-set-default-upper-limit-of-tx-rx-queues-to-8.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "wcn36xx: Don't use the destroyed hal_mutex" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled wcn36xx: Don't use the destroyed hal_mutex to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: wcn36xx-don-t-use-the-destroyed-hal_mutex.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Bjorn Andersson <bjorn.andersson(a)linaro.org> Date: Wed, 11 Jan 2017 16:32:21 +0200 Subject: wcn36xx: Don't use the destroyed hal_mutex From: Bjorn Andersson <bjorn.andersson(a)linaro.org> [ Upstream commit d53628882255481b710641dd0118fbd80af6e983 ] ieee80211_unregister_hw() might invoke operations to stop the interface, that uses the hal_mutex. So don't destroy it until after we're done using it. Signed-off-by: Bjorn Andersson <bjorn.andersson(a)linaro.org> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/wcn36xx/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -1165,11 +1165,12 @@ static int wcn36xx_remove(struct platfor wcn36xx_dbg(WCN36XX_DBG_MAC, "platform remove\n"); release_firmware(wcn->nv); - mutex_destroy(&wcn->hal_mutex); ieee80211_unregister_hw(hw); iounmap(wcn->dxe_base); iounmap(wcn->ccu_base); + + mutex_destroy(&wcn->hal_mutex); ieee80211_free_hw(hw); return 0; Patches currently in stable-queue which might be from bjorn.andersson(a)linaro.org are queue-4.9/wcn36xx-don-t-use-the-destroyed-hal_mutex.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "video: fbdev: pmag-ba-fb: Remove bad `__init' annotation" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled video: fbdev: pmag-ba-fb: Remove bad `__init' annotation to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: video-fbdev-pmag-ba-fb-remove-bad-__init-annotation.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: "Maciej W. Rozycki" <macro(a)linux-mips.org> Date: Mon, 30 Jan 2017 17:39:48 +0100 Subject: video: fbdev: pmag-ba-fb: Remove bad `__init' annotation From: "Maciej W. Rozycki" <macro(a)linux-mips.org> [ Upstream commit 879e5a0df626f39cbb3c61bb90373e56d67012c4 ] Fix: WARNING: drivers/video/fbdev/pmag-ba-fb.o(.text+0x308): Section mismatch in reference from the function pmagbafb_probe() to the function .init.text:pmagbafb_erase_cursor() The function pmagbafb_probe() references the function __init pmagbafb_erase_cursor(). This is often because pmagbafb_probe lacks a __init annotation or the annotation of pmagbafb_erase_cursor is wrong. -- a fallout from a missed update from commit 9625b51350cc ("VIDEO: PMAG-BA: Fix section mismatch") and then commit 48c68c4f1b54 ("Drivers: video: remove __dev* attributes.") Signed-off-by: Maciej W. Rozycki <macro(a)linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/pmag-ba-fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/video/fbdev/pmag-ba-fb.c +++ b/drivers/video/fbdev/pmag-ba-fb.c @@ -129,7 +129,7 @@ static struct fb_ops pmagbafb_ops = { /* * Turn the hardware cursor off. */ -static void __init pmagbafb_erase_cursor(struct fb_info *info) +static void pmagbafb_erase_cursor(struct fb_info *info) { struct pmagbafb_par *par = info->par; Patches currently in stable-queue which might be from macro(a)linux-mips.org are queue-4.9/video-fbdev-pmag-ba-fb-remove-bad-__init-annotation.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "usb: hcd: initialize hcd->flags to 0 when rm hcd" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: hcd: initialize hcd->flags to 0 when rm hcd to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-hcd-initialize-hcd-flags-to-0-when-rm-hcd.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: William wu <wulf(a)rock-chips.com> Date: Fri, 13 Jan 2017 11:04:22 +0800 Subject: usb: hcd: initialize hcd->flags to 0 when rm hcd From: William wu <wulf(a)rock-chips.com> [ Upstream commit 76b8db0d480e8045e1a1902fc9ab143b3b9ef115 ] On some platforms(e.g. rk3399 board), we can call hcd_add/remove consecutively without calling usb_put_hcd/usb_create_hcd in between, so hcd->flags can be stale. If the HC dies due to whatever reason then without this patch we get the below error on next hcd_add. [173.296154] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up [173.296209] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [173.296762] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 [173.296931] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [173.297179] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [173.297203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [173.297222] usb usb6: Product: xHCI Host Controller [173.297240] usb usb6: Manufacturer: Linux 4.4.21 xhci-hcd [173.297257] usb usb6: SerialNumber: xhci-hcd.2.auto [173.298680] hub 6-0:1.0: USB hub found [173.298749] hub 6-0:1.0: 1 port detected [173.299382] rockchip-dwc3 usb@fe800000: USB HOST connected [173.395418] hub 5-0:1.0: activate --> -19 [173.603447] irq 228: nobody cared (try booting with the "irqpoll" option) [173.603493] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.21 #9 [173.603513] Hardware name: Google Kevin (DT) [173.603531] Call trace: [173.603568] [<ffffffc0002087dc>] dump_backtrace+0x0/0x160 [173.603596] [<ffffffc00020895c>] show_stack+0x20/0x28 [173.603623] [<ffffffc0004b28a8>] dump_stack+0x90/0xb0 [173.603650] [<ffffffc00027347c>] __report_bad_irq+0x48/0xe8 [173.603674] [<ffffffc0002737cc>] note_interrupt+0x1e8/0x28c [173.603698] [<ffffffc000270a38>] handle_irq_event_percpu+0x1d4/0x25c [173.603722] [<ffffffc000270b0c>] handle_irq_event+0x4c/0x7c [173.603748] [<ffffffc00027456c>] handle_fasteoi_irq+0xb4/0x124 [173.603777] [<ffffffc00026fe3c>] generic_handle_irq+0x30/0x44 [173.603804] [<ffffffc0002701a8>] __handle_domain_irq+0x90/0xbc [173.603827] [<ffffffc0002006f4>] gic_handle_irq+0xcc/0x188 ... [173.604500] [<ffffffc000203700>] el1_irq+0x80/0xf8 [173.604530] [<ffffffc000261388>] cpu_startup_entry+0x38/0x3cc [173.604558] [<ffffffc00090f7d8>] rest_init+0x8c/0x94 [173.604585] [<ffffffc000e009ac>] start_kernel+0x3d0/0x3fc [173.604607] [<0000000000b16000>] 0xb16000 [173.604622] handlers: [173.604648] [<ffffffc000642084>] usb_hcd_irq [173.604673] Disabling IRQ #228 Signed-off-by: William wu <wulf(a)rock-chips.com> Acked-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/hcd.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -3023,6 +3023,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) } usb_put_invalidate_rhdev(hcd); + hcd->flags = 0; } EXPORT_SYMBOL_GPL(usb_remove_hcd); Patches currently in stable-queue which might be from wulf(a)rock-chips.com are queue-4.9/usb-hcd-initialize-hcd-flags-to-0-when-rm-hcd.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "serial: sh-sci: Fix register offsets for the IRDA serial port" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sh-sci: Fix register offsets for the IRDA serial port to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Date: Wed, 11 Jan 2017 16:43:32 +0200 Subject: serial: sh-sci: Fix register offsets for the IRDA serial port From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> [ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ] Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the registers offset in the driver and the platform data regshift value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 - drivers/tty/serial/sh-sci.c | 17 ++++++++--------- 2 files changed, 8 insertions(+), 10 deletions(-) --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -165,7 +165,6 @@ static struct plat_sci_port scif2_platfo .scscr = SCSCR_TE | SCSCR_RE, .type = PORT_IRDA, .ops = &sh770x_sci_port_ops, - .regshift = 1, }; static struct resource scif2_resources[] = { --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -193,18 +193,17 @@ static const struct plat_sci_reg sci_reg }, /* - * Common definitions for legacy IrDA ports, dependent on - * regshift value. + * Common definitions for legacy IrDA ports. */ [SCIx_IRDA_REGTYPE] = { [SCSMR] = { 0x00, 8 }, - [SCBRR] = { 0x01, 8 }, - [SCSCR] = { 0x02, 8 }, - [SCxTDR] = { 0x03, 8 }, - [SCxSR] = { 0x04, 8 }, - [SCxRDR] = { 0x05, 8 }, - [SCFCR] = { 0x06, 8 }, - [SCFDR] = { 0x07, 16 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, [SCTFDR] = sci_reg_invalid, [SCRFDR] = sci_reg_invalid, [SCSPTR] = sci_reg_invalid, Patches currently in stable-queue which might be from laurent.pinchart+renesas(a)ideasonboard.com are queue-4.9/serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "sched/cputime, powerpc32: Fix stale scaled stime on context switch" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sched/cputime, powerpc32: Fix stale scaled stime on context switch to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sched-cputime-powerpc32-fix-stale-scaled-stime-on-context-switch.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Frederic Weisbecker <fweisbec(a)gmail.com> Date: Thu, 5 Jan 2017 18:11:41 +0100 Subject: sched/cputime, powerpc32: Fix stale scaled stime on context switch From: Frederic Weisbecker <fweisbec(a)gmail.com> [ Upstream commit 90d08ba2b9b4be4aeca6a5b5a4b09fbcde30194d ] On context switch with powerpc32, the cputime is accumulated in the thread_info struct. So the switching-in task must move forward its start time snapshot to the current time in order to later compute the delta spent in system mode. This is what we do for the normal cputime by initializing the starttime field to the value of the previous task's starttime which got freshly updated. But we are missing the update of the scaled cputime start time. As a result we may be accounting too much scaled cputime later. Fix this by initializing the scaled cputime the same way we do for normal cputime. Signed-off-by: Frederic Weisbecker <fweisbec(a)gmail.com> Acked-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: Christian Borntraeger <borntraeger(a)de.ibm.com> Cc: Fenghua Yu <fenghua.yu(a)intel.com> Cc: Heiko Carstens <heiko.carstens(a)de.ibm.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Paul Mackerras <paulus(a)samba.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Rik van Riel <riel(a)redhat.com> Cc: Stanislaw Gruszka <sgruszka(a)redhat.com> Cc: Tony Luck <tony.luck(a)intel.com> Cc: Wanpeng Li <wanpeng.li(a)hotmail.com> Link: http://lkml.kernel.org/r/1483636310-6557-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/kernel/time.c | 1 + 1 file changed, 1 insertion(+) --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -407,6 +407,7 @@ void arch_vtime_task_switch(struct task_ struct cpu_accounting_data *acct = get_accounting(current); acct->starttime = get_accounting(prev)->starttime; + acct->startspurr = get_accounting(prev)->startspurr; acct->system_time = 0; acct->user_time = 0; } Patches currently in stable-queue which might be from fweisbec(a)gmail.com are queue-4.9/sched-cputime-powerpc32-fix-stale-scaled-stime-on-context-switch.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "sched/core: Add missing update_rq_clock() call in sched_move_task()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sched/core: Add missing update_rq_clock() call in sched_move_task() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sched-core-add-missing-update_rq_clock-call-in-sched_move_task.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Peter Zijlstra <peterz(a)infradead.org> Date: Mon, 23 Jan 2017 16:05:55 +0100 Subject: sched/core: Add missing update_rq_clock() call in sched_move_task() From: Peter Zijlstra <peterz(a)infradead.org> [ Upstream commit 1b1d62254df0fe42a711eb71948f915918987790 ] Bug was noticed via this warning: WARNING: CPU: 6 PID: 1 at kernel/sched/sched.h:804 detach_task_cfs_rq+0x8e8/0xb80 rq->clock_update_flags < RQCF_ACT_SKIP Modules linked in: CPU: 6 PID: 1 Comm: systemd Not tainted 4.10.0-rc5-00140-g0874170baf55-dirty #1 Hardware name: Supermicro SYS-4048B-TRFT/X10QBi, BIOS 1.0 04/11/2014 Call Trace: dump_stack+0x4d/0x65 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 detach_task_cfs_rq+0x8e8/0xb80 ? allocate_cgrp_cset_links+0x59/0x80 task_change_group_fair+0x27/0x150 sched_change_group+0x48/0xf0 sched_move_task+0x53/0x150 cpu_cgroup_attach+0x36/0x70 cgroup_taskset_migrate+0x175/0x300 cgroup_migrate+0xab/0xd0 cgroup_attach_task+0xf0/0x190 __cgroup_procs_write+0x1ed/0x2f0 cgroup_procs_write+0x14/0x20 cgroup_file_write+0x3f/0x100 kernfs_fop_write+0x104/0x180 __vfs_write+0x37/0x140 vfs_write+0xb8/0x1b0 SyS_write+0x55/0xc0 do_syscall_64+0x61/0x170 entry_SYSCALL64_slow_path+0x25/0x25 Reported-by: Ingo Molnar <mingo(a)kernel.org> Reported-by: Borislav Petkov <bp(a)alien8.de> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Mike Galbraith <efault(a)gmx.de> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/sched/core.c | 1 + 1 file changed, 1 insertion(+) --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -7961,6 +7961,7 @@ void sched_move_task(struct task_struct struct rq *rq; rq = task_rq_lock(tsk, &rf); + update_rq_clock(rq); running = task_current(rq, tsk); queued = task_on_rq_queued(tsk); Patches currently in stable-queue which might be from peterz(a)infradead.org are queue-4.9/sched-core-add-missing-update_rq_clock-call-in-sched_move_task.patch queue-4.9/sched-cputime-powerpc32-fix-stale-scaled-stime-on-context-switch.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "s390/topology: make "topology=off" parameter work" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/topology: make "topology=off" parameter work to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-topology-make-topology-off-parameter-work.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Heiko Carstens <heiko.carstens(a)de.ibm.com> Date: Thu, 29 Dec 2016 13:52:52 +0100 Subject: s390/topology: make "topology=off" parameter work From: Heiko Carstens <heiko.carstens(a)de.ibm.com> [ Upstream commit 68cc795d1933285705ced6d841ef66c00ce98cbe ] The "topology=off" kernel parameter is supposed to prevent the kernel to use hardware topology information to generate scheduling domains etc. For an unknown reason I implemented this in a very odd way back then: instead of simply clearing the MACHINE_HAS_TOPOLOGY flag within the lowcore I added a second variable which indicated that topology information should not be used. This is more than suboptimal since it partially doesn't work. For the fake NUMA case topology information is still considered and scheduling domains will be created based on this. To fix this and to simplify the code get rid of the extra variable and implement the "topology=off" case like it is done for other features. Signed-off-by: Heiko Carstens <heiko.carstens(a)de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/s390/kernel/early.c | 12 ++++++++++++ arch/s390/kernel/topology.c | 11 ++--------- 2 files changed, 14 insertions(+), 9 deletions(-) --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -363,6 +363,18 @@ static inline void save_vector_registers #endif } +static int __init topology_setup(char *str) +{ + bool enabled; + int rc; + + rc = kstrtobool(str, &enabled); + if (!rc && !enabled) + S390_lowcore.machine_flags &= ~MACHINE_HAS_TOPOLOGY; + return rc; +} +early_param("topology", topology_setup); + static int __init disable_vector_extension(char *str) { S390_lowcore.machine_flags &= ~MACHINE_FLAG_VX; --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -37,7 +37,6 @@ static void set_topology_timer(void); static void topology_work_fn(struct work_struct *work); static struct sysinfo_15_1_x *tl_info; -static bool topology_enabled = true; static DECLARE_WORK(topology_work, topology_work_fn); /* @@ -56,7 +55,7 @@ static cpumask_t cpu_group_map(struct ma cpumask_t mask; cpumask_copy(&mask, cpumask_of(cpu)); - if (!topology_enabled || !MACHINE_HAS_TOPOLOGY) + if (!MACHINE_HAS_TOPOLOGY) return mask; for (; info; info = info->next) { if (cpumask_test_cpu(cpu, &info->mask)) @@ -71,7 +70,7 @@ static cpumask_t cpu_thread_map(unsigned int i; cpumask_copy(&mask, cpumask_of(cpu)); - if (!topology_enabled || !MACHINE_HAS_TOPOLOGY) + if (!MACHINE_HAS_TOPOLOGY) return mask; cpu -= cpu % (smp_cpu_mtid + 1); for (i = 0; i <= smp_cpu_mtid; i++) @@ -413,12 +412,6 @@ static const struct cpumask *cpu_drawer_ return &per_cpu(cpu_topology, cpu).drawer_mask; } -static int __init early_parse_topology(char *p) -{ - return kstrtobool(p, &topology_enabled); -} -early_param("topology", early_parse_topology); - static struct sched_domain_topology_level s390_topology[] = { { cpu_thread_mask, cpu_smt_flags, SD_INIT_NAME(SMT) }, { cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) }, Patches currently in stable-queue which might be from heiko.carstens(a)de.ibm.com are queue-4.9/s390-topology-make-topology-off-parameter-work.patch queue-4.9/sched-cputime-powerpc32-fix-stale-scaled-stime-on-context-switch.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "s390/qeth: issue STARTLAN as first IPA command" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/qeth: issue STARTLAN as first IPA command to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-qeth-issue-startlan-as-first-ipa-command.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Date: Thu, 12 Jan 2017 15:48:42 +0100 Subject: s390/qeth: issue STARTLAN as first IPA command From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> [ Upstream commit 1034051045d125579ab1e8fcd5a724eeb0e70149 ] STARTLAN needs to be the first IPA command after MPC initialization completes. So move the qeth_send_startlan() call from the layer disciplines into the core path, right after the MPC handshake. While at it, replace the magic LAN OFFLINE return code with the existing enum. Signed-off-by: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht(a)linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun(a)linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/net/qeth_core.h | 1 - drivers/s390/net/qeth_core_main.c | 21 +++++++++++++++++---- drivers/s390/net/qeth_l2_main.c | 15 --------------- drivers/s390/net/qeth_l3_main.c | 15 --------------- 4 files changed, 17 insertions(+), 35 deletions(-) --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -921,7 +921,6 @@ void qeth_clear_thread_running_bit(struc int qeth_core_hardsetup_card(struct qeth_card *); void qeth_print_status_message(struct qeth_card *); int qeth_init_qdio_queues(struct qeth_card *); -int qeth_send_startlan(struct qeth_card *); int qeth_send_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *, int (*reply_cb) (struct qeth_card *, struct qeth_reply *, unsigned long), --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2944,7 +2944,7 @@ int qeth_send_ipa_cmd(struct qeth_card * } EXPORT_SYMBOL_GPL(qeth_send_ipa_cmd); -int qeth_send_startlan(struct qeth_card *card) +static int qeth_send_startlan(struct qeth_card *card) { int rc; struct qeth_cmd_buffer *iob; @@ -2957,7 +2957,6 @@ int qeth_send_startlan(struct qeth_card rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); return rc; } -EXPORT_SYMBOL_GPL(qeth_send_startlan); static int qeth_default_setadapterparms_cb(struct qeth_card *card, struct qeth_reply *reply, unsigned long data) @@ -5091,6 +5090,20 @@ retriable: goto out; } + rc = qeth_send_startlan(card); + if (rc) { + QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); + if (rc == IPA_RC_LAN_OFFLINE) { + dev_warn(&card->gdev->dev, + "The LAN is offline\n"); + card->lan_online = 0; + } else { + rc = -ENODEV; + goto out; + } + } else + card->lan_online = 1; + card->options.ipa4.supported_funcs = 0; card->options.ipa6.supported_funcs = 0; card->options.adp.supported_funcs = 0; @@ -5102,14 +5115,14 @@ retriable: if (qeth_is_supported(card, IPA_SETADAPTERPARMS)) { rc = qeth_query_setadapterparms(card); if (rc < 0) { - QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); + QETH_DBF_TEXT_(SETUP, 2, "7err%d", rc); goto out; } } if (qeth_adp_supported(card, IPA_SETADP_SET_DIAG_ASSIST)) { rc = qeth_query_setdiagass(card); if (rc < 0) { - QETH_DBF_TEXT_(SETUP, 2, "7err%d", rc); + QETH_DBF_TEXT_(SETUP, 2, "8err%d", rc); goto out; } } --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1204,21 +1204,6 @@ static int __qeth_l2_set_online(struct c /* softsetup */ QETH_DBF_TEXT(SETUP, 2, "softsetp"); - rc = qeth_send_startlan(card); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); - if (rc == 0xe080) { - dev_warn(&card->gdev->dev, - "The LAN is offline\n"); - card->lan_online = 0; - goto contin; - } - rc = -ENODEV; - goto out_remove; - } else - card->lan_online = 1; - -contin: if ((card->info.type == QETH_CARD_TYPE_OSD) || (card->info.type == QETH_CARD_TYPE_OSX)) { rc = qeth_l2_start_ipassists(card); --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3230,21 +3230,6 @@ static int __qeth_l3_set_online(struct c /* softsetup */ QETH_DBF_TEXT(SETUP, 2, "softsetp"); - rc = qeth_send_startlan(card); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); - if (rc == 0xe080) { - dev_warn(&card->gdev->dev, - "The LAN is offline\n"); - card->lan_online = 0; - goto contin; - } - rc = -ENODEV; - goto out_remove; - } else - card->lan_online = 1; - -contin: rc = qeth_l3_setadapter_parms(card); if (rc) QETH_DBF_TEXT_(SETUP, 2, "2err%04x", rc); Patches currently in stable-queue which might be from jwi(a)linux.vnet.ibm.com are queue-4.9/s390-qeth-fix-retrieval-of-vipa-and-proxy-arp-addresses.patch queue-4.9/s390-qeth-issue-startlan-as-first-ipa-command.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "s390/qeth: fix retrieval of vipa and proxy-arp addresses" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/qeth: fix retrieval of vipa and proxy-arp addresses to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-qeth-fix-retrieval-of-vipa-and-proxy-arp-addresses.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Ursula Braun <ubraun(a)linux.vnet.ibm.com> Date: Thu, 12 Jan 2017 15:48:43 +0100 Subject: s390/qeth: fix retrieval of vipa and proxy-arp addresses From: Ursula Braun <ubraun(a)linux.vnet.ibm.com> [ Upstream commit e48b9eaaa29a0a7d5da2df136b07eefa0180d584 ] qeth devices in layer3 mode need a separate handling of vipa and proxy-arp addresses. vipa and proxy-arp addresses processed by qeth can be read from userspace. Introduced with commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") the retrieval of vipa and proxy-arp addresses is broken, if more than one vipa or proxy-arp address are set. The qeth code used local variable "int i" for 2 different purposes. This patch now spends 2 separate local variables of type "int". While touching these functions hash_for_each_safe() is converted to hash_for_each(), since there is no removal of hash entries. Signed-off-by: Ursula Braun <ubraun(a)linux.vnet.ibm.com> Reviewed-by: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Reference-ID: RQM 3524 Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/net/qeth_l3_sys.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -692,15 +692,15 @@ static ssize_t qeth_l3_dev_vipa_add_show enum qeth_prot_versions proto) { struct qeth_ipaddr *ipaddr; - struct hlist_node *tmp; char addr_str[40]; + int str_len = 0; int entry_len; /* length of 1 entry string, differs between v4 and v6 */ - int i = 0; + int i; entry_len = (proto == QETH_PROT_IPV4)? 12 : 40; entry_len += 2; /* \n + terminator */ spin_lock_bh(&card->ip_lock); - hash_for_each_safe(card->ip_htable, i, tmp, ipaddr, hnode) { + hash_for_each(card->ip_htable, i, ipaddr, hnode) { if (ipaddr->proto != proto) continue; if (ipaddr->type != QETH_IP_TYPE_VIPA) @@ -708,16 +708,17 @@ static ssize_t qeth_l3_dev_vipa_add_show /* String must not be longer than PAGE_SIZE. So we check if * string length gets near PAGE_SIZE. Then we can savely display * the next IPv6 address (worst case, compared to IPv4) */ - if ((PAGE_SIZE - i) <= entry_len) + if ((PAGE_SIZE - str_len) <= entry_len) break; qeth_l3_ipaddr_to_string(proto, (const u8 *)&ipaddr->u, addr_str); - i += snprintf(buf + i, PAGE_SIZE - i, "%s\n", addr_str); + str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "%s\n", + addr_str); } spin_unlock_bh(&card->ip_lock); - i += snprintf(buf + i, PAGE_SIZE - i, "\n"); + str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "\n"); - return i; + return str_len; } static ssize_t qeth_l3_dev_vipa_add4_show(struct device *dev, @@ -854,15 +855,15 @@ static ssize_t qeth_l3_dev_rxip_add_show enum qeth_prot_versions proto) { struct qeth_ipaddr *ipaddr; - struct hlist_node *tmp; char addr_str[40]; + int str_len = 0; int entry_len; /* length of 1 entry string, differs between v4 and v6 */ - int i = 0; + int i; entry_len = (proto == QETH_PROT_IPV4)? 12 : 40; entry_len += 2; /* \n + terminator */ spin_lock_bh(&card->ip_lock); - hash_for_each_safe(card->ip_htable, i, tmp, ipaddr, hnode) { + hash_for_each(card->ip_htable, i, ipaddr, hnode) { if (ipaddr->proto != proto) continue; if (ipaddr->type != QETH_IP_TYPE_RXIP) @@ -870,16 +871,17 @@ static ssize_t qeth_l3_dev_rxip_add_show /* String must not be longer than PAGE_SIZE. So we check if * string length gets near PAGE_SIZE. Then we can savely display * the next IPv6 address (worst case, compared to IPv4) */ - if ((PAGE_SIZE - i) <= entry_len) + if ((PAGE_SIZE - str_len) <= entry_len) break; qeth_l3_ipaddr_to_string(proto, (const u8 *)&ipaddr->u, addr_str); - i += snprintf(buf + i, PAGE_SIZE - i, "%s\n", addr_str); + str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "%s\n", + addr_str); } spin_unlock_bh(&card->ip_lock); - i += snprintf(buf + i, PAGE_SIZE - i, "\n"); + str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "\n"); - return i; + return str_len; } static ssize_t qeth_l3_dev_rxip_add4_show(struct device *dev, Patches currently in stable-queue which might be from ubraun(a)linux.vnet.ibm.com are queue-4.9/s390-qeth-fix-retrieval-of-vipa-and-proxy-arp-addresses.patch queue-4.9/s390-qeth-issue-startlan-as-first-ipa-command.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "rt2800usb: mark tx failure on timeout" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rt2800usb: mark tx failure on timeout to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rt2800usb-mark-tx-failure-on-timeout.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Stanislaw Gruszka <sgruszka(a)redhat.com> Date: Fri, 6 Jan 2017 14:05:16 +0100 Subject: rt2800usb: mark tx failure on timeout From: Stanislaw Gruszka <sgruszka(a)redhat.com> [ Upstream commit 1701221696764b6861d0ee66850812a8900b9b9b ] If we do not get TX status in reasonable time, we most likely fail to send frame hence mark it as so. Signed-off-by: Stanislaw Gruszka <sgruszka(a)redhat.com> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) --- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c @@ -646,10 +646,9 @@ static void rt2800usb_txdone_nostatus(st !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) break; - if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags) || + rt2800usb_entry_txstatus_timeout(entry)) rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); - else if (rt2800usb_entry_txstatus_timeout(entry)) - rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN); else break; } Patches currently in stable-queue which might be from sgruszka(a)redhat.com are queue-4.9/rt2800usb-mark-tx-failure-on-timeout.patch queue-4.9/sched-cputime-powerpc32-fix-stale-scaled-stime-on-context-switch.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/corenet: explicitly disable the SDHC controller on kmcoge4" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-corenet-explicitly-disable-the-sdhc-controller-on-kmcoge4.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Valentin Longchamp <valentin.longchamp(a)keymile.com> Date: Thu, 15 Dec 2016 14:22:26 +0100 Subject: powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 From: Valentin Longchamp <valentin.longchamp(a)keymile.com> [ Upstream commit a674c7d470bb47e82f4eb1fa944eadeac2f6bbaf ] It is not implemented on the kmcoge4 hardware and if not disabled it leads to error messages with the corenet32_smp_defconfig. Signed-off-by: Valentin Longchamp <valentin.longchamp(a)keymile.com> Signed-off-by: Scott Wood <oss(a)buserror.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/boot/dts/fsl/kmcoge4.dts | 4 ++++ 1 file changed, 4 insertions(+) --- a/arch/powerpc/boot/dts/fsl/kmcoge4.dts +++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts @@ -83,6 +83,10 @@ }; }; + sdhc@114000 { + status = "disabled"; + }; + i2c@119000 { status = "disabled"; }; Patches currently in stable-queue which might be from valentin.longchamp(a)keymile.com are queue-4.9/powerpc-corenet-explicitly-disable-the-sdhc-controller-on-kmcoge4.patch

7 years, 8 months

1
0
0 0

[Linux-stable-mirror] Patch "PM / OPP: Error out on failing to add static OPPs for v1 bindings" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PM / OPP: Error out on failing to add static OPPs for v1 bindings to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pm-opp-error-out-on-failing-to-add-static-opps-for-v1-bindings.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Viresh Kumar <viresh.kumar(a)linaro.org> Date: Mon, 2 Jan 2017 14:40:58 +0530 Subject: PM / OPP: Error out on failing to add static OPPs for v1 bindings From: Viresh Kumar <viresh.kumar(a)linaro.org> [ Upstream commit 04a86a84c42ca18f37ab446127dc619b41dd3b23 ] The code adding static OPPs for V2 bindings already does so. Make the V1 bindings specific code behave the same. Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Reviewed-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/base/power/opp/of.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) --- a/drivers/base/power/opp/of.c +++ b/drivers/base/power/opp/of.c @@ -386,7 +386,7 @@ static int _of_add_opp_table_v1(struct d { const struct property *prop; const __be32 *val; - int nr; + int nr, ret; prop = of_find_property(dev->of_node, "operating-points", NULL); if (!prop) @@ -409,9 +409,13 @@ static int _of_add_opp_table_v1(struct d unsigned long freq = be32_to_cpup(val++) * 1000; unsigned long volt = be32_to_cpup(val++); - if (_opp_add_v1(dev, freq, volt, false)) - dev_warn(dev, "%s: Failed to add OPP %ld\n", - __func__, freq); + ret = _opp_add_v1(dev, freq, volt, false); + if (ret) { + dev_err(dev, "%s: Failed to add OPP %ld (%d)\n", + __func__, freq, ret); + dev_pm_opp_of_remove_table(dev); + return ret; + } nr -= 2; } Patches currently in stable-queue which might be from viresh.kumar(a)linaro.org are queue-4.9/pm-opp-error-out-on-failing-to-add-static-opps-for-v1-bindings.patch

7 years, 8 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror