Turns out this part is my fault for not noticing when reviewing
9a2eba337cace ("drm/nouveau: Fix drm poll_helper handling"). Currently
we call drm_kms_helper_poll_enable() from nouveau_display_hpd_work().
This makes basically no sense however, because that means we're calling
drm_kms_helper_poll_enable() every time we schedule the hotplug
detection work. This is also against the advice mentioned in
drm_kms_helper_poll_enable()'s documentation:
Note that calls to enable and disable polling must be strictly ordered,
which is automatically the case when they're only call from
suspend/resume callbacks.
Of course, hotplugs can't really be ordered. They could even happen
immediately after we called drm_kms_helper_poll_disable() in
nouveau_display_fini(), which can lead to all sorts of issues.
Additionally; enabling polling /after/ we call
drm_helper_hpd_irq_event() could also mean that we'd miss a hotplug
event anyway, since drm_helper_hpd_irq_event() wouldn't bother trying to
probe connectors so long as polling is disabled.
So; simply move this back into nouveau_display_init() again. The race
condition that both of these patches attempted to work around has
already been fixed properly in
d61a5c106351 ("drm/nouveau: Fix deadlock on runtime suspend")
Fixes: 9a2eba337cace ("drm/nouveau: Fix drm poll_helper handling")
Signed-off-by: Lyude Paul <lyude(a)redhat.com>
Cc: Lukas Wunner <lukas(a)wunner.de>
Cc: Peter Ujfalusi <peter.ujfalusi(a)ti.com>
Cc: stable(a)vger.kernel.org
---
drivers/gpu/drm/nouveau/nouveau_display.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index ec7861457b84..1d36ab5d4796 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -355,8 +355,6 @@ nouveau_display_hpd_work(struct work_struct *work)
pm_runtime_get_sync(drm->dev->dev);
drm_helper_hpd_irq_event(drm->dev);
- /* enable polling for external displays */
- drm_kms_helper_poll_enable(drm->dev);
pm_runtime_mark_last_busy(drm->dev->dev);
pm_runtime_put_sync(drm->dev->dev);
@@ -411,6 +409,11 @@ nouveau_display_init(struct drm_device *dev)
if (ret)
return ret;
+ /* enable connector detection and polling for connectors without HPD
+ * support
+ */
+ drm_kms_helper_poll_enable(dev);
+
/* enable hotplug interrupts */
drm_connector_list_iter_begin(dev, &conn_iter);
nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) {
--
2.17.1
Hi,
These patches fix a memory leak in per-cpu areas in v4.9.y
The following command sequence
while :; do
c=$(docker create busybox)
docker start $c
docker stop $c
docker rm $c
done
causes the number of pcpu_get_vm_area entries in /proc/vmallocinfo to grow.
The commit d6cffbbe9a7e ("proc/sysctl: prune stale dentries during
unregistering") fixes the issue and the commits ace0c791e6c3 ("proc/sysctl:
Don't grab i_lock under sysctl_lock.") and 2fd1d2c4ceb2 ("proc: Fix
proc_sys_prune_dcache to hold a sb reference") are the follow-up fixups.
I've also checked v4.4 and the issue does not appear there.
Eric W. Biederman (2):
proc/sysctl: Don't grab i_lock under sysctl_lock.
proc: Fix proc_sys_prune_dcache to hold a sb reference
Konstantin Khlebnikov (1):
proc/sysctl: prune stale dentries during unregistering
fs/proc/inode.c | 3 +-
fs/proc/internal.h | 7 +++--
fs/proc/proc_sysctl.c | 83 +++++++++++++++++++++++++++++++++++++++-----------
include/linux/sysctl.h | 1 +
4 files changed, 74 insertions(+), 20 deletions(-)
--
2.7.4
Hi Greg,
This was missing in 4.4-stable. Please apply to your queue.
It will depend on 08bb558ac11a ("IB/core: Make testing MR flags for
writability a static inline function") which I have sent earlier.
--
Regards
Sudip
From: "K. Y. Srinivasan" <kys(a)microsoft.com>
Fix a bug in the key delete code - the num_records range
from 0 to num_records-1.
Signed-off-by: K. Y. Srinivasan <kys(a)microsoft.com>
Reported-by: David Binderman <dcb314(a)hotmail.com>
Cc: <stable(a)vger.kernel.org>
---
tools/hv/hv_kvp_daemon.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index dbf6e8bd98ba..bbb2a8ef367c 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -286,7 +286,7 @@ static int kvp_key_delete(int pool, const __u8 *key, int key_size)
* Found a match; just move the remaining
* entries up.
*/
- if (i == num_records) {
+ if (i == (num_records - 1)) {
kvp_file_info[pool].num_records--;
kvp_update_file(pool);
return 0;
--
2.18.0
Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.
To make things worse, the parent pmc node could end up being prematurely
freed as of_find_node_by_name() drops a reference to its first argument.
Fixes: 3568df3d31d6 ("soc: tegra: Add thermal reset (thermtrip) support to PMC")
Cc: stable <stable(a)vger.kernel.org> # 4.0
Cc: Mikko Perttunen <mperttunen(a)nvidia.com>
Signed-off-by: Johan Hovold <johan(a)kernel.org>
---
drivers/soc/tegra/pmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 0453ff6839a7..7e9ef3431bea 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -1321,7 +1321,7 @@ static void tegra_pmc_init_tsense_reset(struct tegra_pmc *pmc)
if (!pmc->soc->has_tsense_reset)
return;
- np = of_find_node_by_name(pmc->dev->of_node, "i2c-thermtrip");
+ np = of_get_child_by_name(pmc->dev->of_node, "i2c-thermtrip");
if (!np) {
dev_warn(dev, "i2c-thermtrip node not found, %s.\n", disabled);
return;
--
2.15.0
This patch series includes some improvement to Machine check handler
for pseries. Patch 1 fixes a buffer overrun issue if rtas extended error
log size is greater than RTAS_ERROR_LOG_MAX.
Patch 2 fixes an issue where machine check handler crashes
kernel while accessing vmalloc-ed buffer while in nmi context.
Patch 3 fixes endain bug while restoring of r3 in MCE handler.
Patch 5 implements a real mode mce handler and flushes the SLBs on SLB error.
Patch 6 display's the MCE error details on console.
Patch 7 saves and dumps the SLB contents on SLB MCE errors to improve the
debugability.
Patch 8 adds sysctl knob for recovery action on recovered MCEs.
Patch 9 consolidates mce early real mode handling code.
Change in V7:
- Fold Michal's patch into patch 5
- Handle MSR_RI=0 and evil context case in MC handler in patch 5.
- Patch 7: Print slb cache ptr value and slb cache data.
- Move patch 8 to patch 9.
- Introduce patch 8 add sysctl knob for recovery action on recovered MCEs.
Change in V6:
- Introduce patch 8 to consolidate early real mode handling code.
- Address Nick's comment on erroneous hunk.
Change in V5:
- Use min_t instead of max_t.
- Fix an issue reported by kbuild test robot and address review comments.
Change in V4:
- Flush the SLBs in real mode mce handler to handle SLB errors for entry 0.
- Allocate buffers per cpu to hold rtas error log and old slb contents.
- Defer the logging of rtas error log to irq work queue.
Change in V3:
- Moved patch 5 to patch 2
Change in V2:
- patch 3: Display additional info (NIP and task info) in MCE error details.
- patch 5: Fix endain bug while restoring of r3 in MCE handler.
---
Mahesh Salgaonkar (9):
powerpc/pseries: Avoid using the size greater than RTAS_ERROR_LOG_MAX.
powerpc/pseries: Defer the logging of rtas error to irq work queue.
powerpc/pseries: Fix endainness while restoring of r3 in MCE handler.
powerpc/pseries: Define MCE error event section.
powerpc/pseries: flush SLB contents on SLB MCE errors.
powerpc/pseries: Display machine check error details.
powerpc/pseries: Dump the SLB contents on SLB MCE errors.
powerpc/mce: Add sysctl control for recovery action on MCE.
powernv/pseries: consolidate code for mce early handling.
arch/powerpc/include/asm/book3s/64/mmu-hash.h | 8 +
arch/powerpc/include/asm/machdep.h | 1
arch/powerpc/include/asm/mce.h | 2
arch/powerpc/include/asm/paca.h | 7 +
arch/powerpc/include/asm/rtas.h | 116 ++++++++++++
arch/powerpc/kernel/exceptions-64s.S | 42 ++++
arch/powerpc/kernel/mce.c | 73 +++++++-
arch/powerpc/kernel/traps.c | 3
arch/powerpc/mm/slb.c | 79 ++++++++
arch/powerpc/platforms/powernv/setup.c | 15 ++
arch/powerpc/platforms/pseries/pseries.h | 1
arch/powerpc/platforms/pseries/ras.c | 242 +++++++++++++++++++++++--
arch/powerpc/platforms/pseries/setup.c | 27 +++
13 files changed, 588 insertions(+), 28 deletions(-)
--
Signature