The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 03703ed1debf777ea845aa9b50ba2e80a5e7dd3c Mon Sep 17 00:00:00 2001
From: Sakari Ailus <sakari.ailus(a)linux.intel.com>
Date: Fri, 2 Feb 2018 05:08:59 -0500
Subject: [PATCH] media: vb2: core: Finish buffers at the end of the stream
If buffers were prepared or queued and the buffers were released without
starting the queue, the finish mem op (corresponding to the prepare mem
op) was never called to the buffers.
Before commit a136f59c0a1f there was no need to do this as in such a case
the prepare mem op had not been called yet. Address the problem by
explicitly calling finish mem op when the queue is stopped if the buffer
is in either prepared or queued state.
Fixes: a136f59c0a1f ("[media] vb2: Move buffer cache synchronisation to prepare from queue")
Cc: stable(a)vger.kernel.org # for v4.13 and up
Signed-off-by: Sakari Ailus <sakari.ailus(a)linux.intel.com>
Tested-by: Devin Heitmueller <dheitmueller(a)kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com>
diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
index debe35fc66b4..d3f7bb33a54d 100644
--- a/drivers/media/common/videobuf2/videobuf2-core.c
+++ b/drivers/media/common/videobuf2/videobuf2-core.c
@@ -1696,6 +1696,15 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
for (i = 0; i < q->num_buffers; ++i) {
struct vb2_buffer *vb = q->bufs[i];
+ if (vb->state == VB2_BUF_STATE_PREPARED ||
+ vb->state == VB2_BUF_STATE_QUEUED) {
+ unsigned int plane;
+
+ for (plane = 0; plane < vb->num_planes; ++plane)
+ call_void_memop(vb, finish,
+ vb->planes[plane].mem_priv);
+ }
+
if (vb->state != VB2_BUF_STATE_DEQUEUED) {
vb->state = VB2_BUF_STATE_PREPARED;
call_void_vb_qop(vb, buf_finish, vb);
From: Dewet Thibaut <thibaut.dewet(a)nokia.com>
Previously the min interval limitation (one second) has been introduced.
In this case it was no longer possible to disable the machine check.
This patch removes this limitation and allows the value 0 again.
Cc: stable(a)vger.kernel.org
Fixes: b3b7c4795c ("x86/MCE: Serialize sysfs changes")
Signed-off-by: Dewet Thibaut <thibaut.dewet(a)nokia.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin(a)nokia.com>
---
arch/x86/kernel/cpu/mcheck/mce.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index c102ad51025e..8c50754c09c1 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -2165,9 +2165,6 @@ static ssize_t store_int_with_restart(struct device *s,
if (check_interval == old_check_interval)
return ret;
- if (check_interval < 1)
- check_interval = 1;
-
mutex_lock(&mce_sysfs_mutex);
mce_restart();
mutex_unlock(&mce_sysfs_mutex);
--
2.18.0
This is a note to let you know that I've just added the patch titled
usb: cdc_acm: Add quirk for Castles VEGA3000
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From 1445cbe476fc3dd09c0b380b206526a49403c071 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak(a)v3.sk>
Date: Tue, 10 Jul 2018 08:28:49 +0200
Subject: usb: cdc_acm: Add quirk for Castles VEGA3000
The device (a POS terminal) implements CDC ACM, but has not union
descriptor.
Signed-off-by: Lubomir Rintel <lkundrak(a)v3.sk>
Acked-by: Oliver Neukum <oneukum(a)suse.com>
Cc: stable <stable(a)vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/class/cdc-acm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 998b32d0167e..75c4623ad779 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1831,6 +1831,9 @@ static const struct usb_device_id acm_ids[] = {
{ USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */
.driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */
},
+ { USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
{ USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
.driver_info = CLEAR_HALT_CONDITIONS,
--
2.18.0
This is a note to let you know that I've just added the patch titled
eventpoll.h: wrap casts in () properly
to my char-misc git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
in the char-misc-next branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will also be merged in the next major kernel release
during the merge window.
If you have any questions about this process, please let me know.
>From 45cd74cb5061781e793a098c420a7f548fdc9e7d Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Date: Tue, 10 Jul 2018 17:15:38 +0200
Subject: eventpoll.h: wrap casts in () properly
When importing the latest copy of the kernel headers into Bionic,
Christpher and Elliott noticed that the eventpoll.h casts were not
wrapped in (). As it is, clang complains about macros without
surrounding (), so this makes it a pain for userspace tools.
So fix it up by adding another () pair, and make them line up purty by
using tabs.
Fixes: 65aaf87b3aa2 ("add EPOLLNVAL, annotate EPOLL... and event_poll->event")
Reported-by: Christopher Ferris <cferris(a)google.com>
Reported-by: Elliott Hughes <enh(a)google.com>
Cc: stable <stable(a)vger.kernel.org>
Cc: Thomas Gleixner <tglx(a)linutronix.de>
Cc: Al Viro <viro(a)zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
include/uapi/linux/eventpoll.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h
index bf48e71f2634..8a3432d0f0dc 100644
--- a/include/uapi/linux/eventpoll.h
+++ b/include/uapi/linux/eventpoll.h
@@ -42,7 +42,7 @@
#define EPOLLRDHUP (__force __poll_t)0x00002000
/* Set exclusive wakeup mode for the target file descriptor */
-#define EPOLLEXCLUSIVE (__force __poll_t)(1U << 28)
+#define EPOLLEXCLUSIVE ((__force __poll_t)(1U << 28))
/*
* Request the handling of system wakeup events so as to prevent system suspends
@@ -54,13 +54,13 @@
*
* Requires CAP_BLOCK_SUSPEND
*/
-#define EPOLLWAKEUP (__force __poll_t)(1U << 29)
+#define EPOLLWAKEUP ((__force __poll_t)(1U << 29))
/* Set the One Shot behaviour for the target file descriptor */
-#define EPOLLONESHOT (__force __poll_t)(1U << 30)
+#define EPOLLONESHOT ((__force __poll_t)(1U << 30))
/* Set the Edge Triggered behaviour for the target file descriptor */
-#define EPOLLET (__force __poll_t)(1U << 31)
+#define EPOLLET ((__force __poll_t)(1U << 31))
/*
* On x86-64 make the 64bit structure have the same alignment as the
--
2.18.0
The patch below does not apply to the 4.16-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 37becec95ac31b209eb1c8e096f1093a7db00f32 Mon Sep 17 00:00:00 2001
From: Omar Sandoval <osandov(a)fb.com>
Date: Mon, 21 May 2018 17:07:19 -0700
Subject: [PATCH] Btrfs: allow empty subvol= again
I got a report that after upgrading to 4.16, someone's filesystems
weren't mounting:
[ 23.845852] BTRFS info (device loop0): unrecognized mount option 'subvol='
Before 4.16, this mounted the default subvolume. It turns out that this
empty "subvol=" is actually an application bug, but it was causing the
application to fail, so it's an ABI break if you squint.
The generic parsing code we use for mount options (match_token())
doesn't match an empty string as "%s". Previously, setup_root_args()
removed the "subvol=" string, but the mount path was cleaned up to not
need that. Add a dummy Opt_subvol_empty to fix this.
The simple workaround is to use / or . for the value of 'subvol=' .
Fixes: 312c89fbca06 ("btrfs: cleanup btrfs_mount() using btrfs_mount_root()")
CC: stable(a)vger.kernel.org # 4.16+
Signed-off-by: Omar Sandoval <osandov(a)fb.com>
Reviewed-by: David Sterba <dsterba(a)suse.com>
Signed-off-by: David Sterba <dsterba(a)suse.com>
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index c67fafaa2fe7..81107ad49f3a 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -323,6 +323,7 @@ enum {
Opt_ssd, Opt_nossd,
Opt_ssd_spread, Opt_nossd_spread,
Opt_subvol,
+ Opt_subvol_empty,
Opt_subvolid,
Opt_thread_pool,
Opt_treelog, Opt_notreelog,
@@ -388,6 +389,7 @@ static const match_table_t tokens = {
{Opt_ssd_spread, "ssd_spread"},
{Opt_nossd_spread, "nossd_spread"},
{Opt_subvol, "subvol=%s"},
+ {Opt_subvol_empty, "subvol="},
{Opt_subvolid, "subvolid=%s"},
{Opt_thread_pool, "thread_pool=%u"},
{Opt_treelog, "treelog"},
@@ -461,6 +463,7 @@ int btrfs_parse_options(struct btrfs_fs_info *info, char *options,
btrfs_set_opt(info->mount_opt, DEGRADED);
break;
case Opt_subvol:
+ case Opt_subvol_empty:
case Opt_subvolid:
case Opt_subvolrootid:
case Opt_device:
The regset API documented in <linux/regset.h> defines -ENODEV as the
result of the `->active' handler to be used where the feature requested
is not available on the hardware found. However code handling core file
note generation in `fill_thread_core_info' interpretes any non-zero
result from the `->active' handler as the regset requested being active.
Consequently processing continues (and hopefully gracefully fails later
on) rather than being abandoned right away for the regset requested.
Fix the problem then by making the code proceed only if a positive
result is returned from the `->active' handler.
Cc: stable(a)vger.kernel.org # 2.6.25+
Fixes: 4206d3aa1978 ("elf core dump: notes user_regset")
Signed-off-by: Maciej W. Rozycki <macro(a)mips.com>
---
Hi,
Overall we could also use the count returned by ->active to limit the
size of data requested, i.e. something along the lines of:
ssize_t size;
if (regset->active)
size = regset->active(t->task, regset);
else
size = regset_size(t->task, regset);
if (size > 0) {
...
however that would be an optimisation that belongs to a separate change,
which (due to the need to unload stuff I have in progress already) I am
not going to make at this point. Perhaps someone else would be willing
to pick up the idea.
Anyway, please apply.
Maciej
---
fs/binfmt_elf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
linux-elf-core-regset-active.diff
Index: linux-jhogan-test/fs/binfmt_elf.c
===================================================================
--- linux-jhogan-test.orig/fs/binfmt_elf.c 2018-03-21 17:14:55.000000000 +0000
+++ linux-jhogan-test/fs/binfmt_elf.c 2018-05-09 23:25:50.742255000 +0100
@@ -1739,7 +1739,7 @@ static int fill_thread_core_info(struct
const struct user_regset *regset = &view->regsets[i];
do_thread_regset_writeback(t->task, regset);
if (regset->core_note_type && regset->get &&
- (!regset->active || regset->active(t->task, regset))) {
+ (!regset->active || regset->active(t->task, regset) > 0)) {
int ret;
size_t size = regset_size(t->task, regset);
void *data = kmalloc(size, GFP_KERNEL);
From: Waldemar Rymarkiewicz <waldemar.rymarkiewicz(a)gmail.com>
Original commit c5c2a97b3ac7 ("PM / OPP: Update voltage in case freq ==
old_freq").
This commit fixes a rare but possible case when the clk rate is updated
without update of the regulator voltage.
At boot up, CPUfreq checks if the system is running at the right freq. This
is a sanity check in case a bootloader set clk rate that is outside of freq
table present with cpufreq core. In such cases system can be unstable so
better to change it to a freq that is preset in freq-table.
The CPUfreq takes next freq that is >= policy->cur and this is our
target_freq that needs to be set now.
dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the
old_freq (a current rate). If these are equal it returns early. If not,
it searches for OPP (old_opp) that fits best to old_freq (not listed in
the table) and updates old_freq (!).
Here, we can end up with old_freq = old_opp.rate = target_freq, which
is not handled in _generic_set_opp_regulator(). It's supposed to update
voltage only when freq > old_freq || freq > old_freq.
if (freq > old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
[...]
if (freq < old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
if (ret)
It results in, no voltage update while clk rate is updated.
Example:
freq-table = {
1000MHz 1.15V
666MHZ 1.10V
333MHz 1.05V
}
boot-up-freq = 800MHz # not listed in freq-table
freq = target_freq = 1GHz
old_freq = 800Mhz
old_opp = _find_freq_ceil(opp_table, &old_freq); #(old_freq is modified!)
old_freq = 1GHz
Fixes: 6a0712f6f199 ("PM / OPP: Add dev_pm_opp_set_rate()")
Cc: 4.6+ <stable(a)vger.kernel.org> # v4.6+
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz(a)gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org>
---
Sending it for stable kernels from 4.6 until 4.9.
drivers/base/power/opp/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 4c7c6da7a989..0580cbe5bd1c 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -642,7 +642,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
rcu_read_unlock();
/* Scaling up? Scale voltage before frequency */
- if (freq > old_freq) {
+ if (freq >= old_freq) {
ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
u_volt_max);
if (ret)
--
2.18.0.rc1.242.g61856ae69a2c
This is a note to let you know that I've just added the patch titled
eventpoll.h: wrap casts in () properly
to my char-misc git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
in the char-misc-testing branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will be merged to the char-misc-next branch sometime soon,
after it passes testing, and the merge window is open.
If you have any questions about this process, please let me know.
>From 45cd74cb5061781e793a098c420a7f548fdc9e7d Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Date: Tue, 10 Jul 2018 17:15:38 +0200
Subject: eventpoll.h: wrap casts in () properly
When importing the latest copy of the kernel headers into Bionic,
Christpher and Elliott noticed that the eventpoll.h casts were not
wrapped in (). As it is, clang complains about macros without
surrounding (), so this makes it a pain for userspace tools.
So fix it up by adding another () pair, and make them line up purty by
using tabs.
Fixes: 65aaf87b3aa2 ("add EPOLLNVAL, annotate EPOLL... and event_poll->event")
Reported-by: Christopher Ferris <cferris(a)google.com>
Reported-by: Elliott Hughes <enh(a)google.com>
Cc: stable <stable(a)vger.kernel.org>
Cc: Thomas Gleixner <tglx(a)linutronix.de>
Cc: Al Viro <viro(a)zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
include/uapi/linux/eventpoll.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h
index bf48e71f2634..8a3432d0f0dc 100644
--- a/include/uapi/linux/eventpoll.h
+++ b/include/uapi/linux/eventpoll.h
@@ -42,7 +42,7 @@
#define EPOLLRDHUP (__force __poll_t)0x00002000
/* Set exclusive wakeup mode for the target file descriptor */
-#define EPOLLEXCLUSIVE (__force __poll_t)(1U << 28)
+#define EPOLLEXCLUSIVE ((__force __poll_t)(1U << 28))
/*
* Request the handling of system wakeup events so as to prevent system suspends
@@ -54,13 +54,13 @@
*
* Requires CAP_BLOCK_SUSPEND
*/
-#define EPOLLWAKEUP (__force __poll_t)(1U << 29)
+#define EPOLLWAKEUP ((__force __poll_t)(1U << 29))
/* Set the One Shot behaviour for the target file descriptor */
-#define EPOLLONESHOT (__force __poll_t)(1U << 30)
+#define EPOLLONESHOT ((__force __poll_t)(1U << 30))
/* Set the Edge Triggered behaviour for the target file descriptor */
-#define EPOLLET (__force __poll_t)(1U << 31)
+#define EPOLLET ((__force __poll_t)(1U << 31))
/*
* On x86-64 make the 64bit structure have the same alignment as the
--
2.18.0