- Linux-stable-mirror - lists.linaro.org

[PATCH] tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}

by Steven Rostedt

From: "Steven Rostedt (VMware)" <rostedt(a)goodmis.org> Doing an audit of trace events, I discovered two trace events in the xen subsystem that use a hack to create zero data size trace events. This is not what trace events are for. Trace events add memory footprint overhead, and if all you need to do is see if a function is hit or not, simply make that function noinline and use function tracer filtering. Worse yet, the hack used was: __array(char, x, 0) Which creates a static string of zero in length. There's assumptions about such constructs in ftrace that this is a dynamic string that is nul terminated. This is not the case with these tracepoints and can cause problems in various parts of ftrace. Nuke the trace events! Cc: stable(a)vger.kernel.org Fixes: 95a7d76897c1e ("xen/mmu: Use Xen specific TLB flush instead of the generic one.") Signed-off-by: Steven Rostedt (VMware) <rostedt(a)goodmis.org> --- arch/x86/xen/mmu.c | 4 +--- arch/x86/xen/mmu_pv.c | 4 +--- include/trace/events/xen.h | 16 ---------------- 3 files changed, 2 insertions(+), 22 deletions(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index d33e7dbe3129..2d76106788a3 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -42,13 +42,11 @@ xmaddr_t arbitrary_virt_to_machine(void *vaddr) } EXPORT_SYMBOL_GPL(arbitrary_virt_to_machine); -static void xen_flush_tlb_all(void) +static noinline void xen_flush_tlb_all(void) { struct mmuext_op *op; struct multicall_space mcs; - trace_xen_mmu_flush_tlb_all(0); - preempt_disable(); mcs = xen_mc_entry(sizeof(*op)); diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c index 486c0a34d00b..2c30cabfda90 100644 --- a/arch/x86/xen/mmu_pv.c +++ b/arch/x86/xen/mmu_pv.c @@ -1310,13 +1310,11 @@ unsigned long xen_read_cr2_direct(void) return this_cpu_read(xen_vcpu_info.arch.cr2); } -static void xen_flush_tlb(void) +static noinline void xen_flush_tlb(void) { struct mmuext_op *op; struct multicall_space mcs; - trace_xen_mmu_flush_tlb(0); - preempt_disable(); mcs = xen_mc_entry(sizeof(*op)); diff --git a/include/trace/events/xen.h b/include/trace/events/xen.h index 7dd8f34c37df..fdcf88bcf0ea 100644 --- a/include/trace/events/xen.h +++ b/include/trace/events/xen.h @@ -352,22 +352,6 @@ DECLARE_EVENT_CLASS(xen_mmu_pgd, DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_pin); DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_unpin); -TRACE_EVENT(xen_mmu_flush_tlb_all, - TP_PROTO(int x), - TP_ARGS(x), - TP_STRUCT__entry(__array(char, x, 0)), - TP_fast_assign((void)x), - TP_printk("%s", "") - ); - -TRACE_EVENT(xen_mmu_flush_tlb, - TP_PROTO(int x), - TP_ARGS(x), - TP_STRUCT__entry(__array(char, x, 0)), - TP_fast_assign((void)x), - TP_printk("%s", "") - ); - TRACE_EVENT(xen_mmu_flush_tlb_one_user, TP_PROTO(unsigned long addr), TP_ARGS(addr), -- 2.13.6

7 years, 1 month

2
4
0 0

[merged] mm-oom-fix-concurrent-munlock-and-oom-reaper-unmap.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: mm, oom: fix concurrent munlock and oom reaper unmap, v3 has been removed from the -mm tree. Its filename was mm-oom-fix-concurrent-munlock-and-oom-reaper-unmap.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: David Rientjes <rientjes(a)google.com> Subject: mm, oom: fix concurrent munlock and oom reaper unmap, v3 Since exit_mmap() is done without the protection of mm->mmap_sem, it is possible for the oom reaper to concurrently operate on an mm until MMF_OOM_SKIP is set. This allows munlock_vma_pages_all() to concurrently run while the oom reaper is operating on a vma. Since munlock_vma_pages_range() depends on clearing VM_LOCKED from vm_flags before actually doing the munlock to determine if any other vmas are locking the same memory, the check for VM_LOCKED in the oom reaper is racy. This is especially noticeable on architectures such as powerpc where clearing a huge pmd requires serialize_against_pte_lookup(). If the pmd is zapped by the oom reaper during follow_page_mask() after the check for pmd_none() is bypassed, this ends up deferencing a NULL ptl or a kernel oops. Fix this by manually freeing all possible memory from the mm before doing the munlock and then setting MMF_OOM_SKIP. The oom reaper can not run on the mm anymore so the munlock is safe to do in exit_mmap(). It also matches the logic that the oom reaper currently uses for determining when to set MMF_OOM_SKIP itself, so there's no new risk of excessive oom killing. This issue fixes CVE-2018-1000200. Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1804241526320.238665@chino.kir.cor… Fixes: 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently") Signed-off-by: David Rientjes <rientjes(a)google.com> Suggested-by: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko(a)suse.com> Cc: Andrea Arcangeli <aarcange(a)redhat.com> Cc: <stable(a)vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- include/linux/oom.h | 2 + mm/mmap.c | 44 +++++++++++++--------- mm/oom_kill.c | 81 ++++++++++++++++++++++-------------------- 3 files changed, 71 insertions(+), 56 deletions(-) diff -puN include/linux/oom.h~mm-oom-fix-concurrent-munlock-and-oom-reaper-unmap include/linux/oom.h --- a/include/linux/oom.h~mm-oom-fix-concurrent-munlock-and-oom-reaper-unmap +++ a/include/linux/oom.h @@ -95,6 +95,8 @@ static inline int check_stable_address_s return 0; } +void __oom_reap_task_mm(struct mm_struct *mm); + extern unsigned long oom_badness(struct task_struct *p, struct mem_cgroup *memcg, const nodemask_t *nodemask, unsigned long totalpages); diff -puN mm/mmap.c~mm-oom-fix-concurrent-munlock-and-oom-reaper-unmap mm/mmap.c --- a/mm/mmap.c~mm-oom-fix-concurrent-munlock-and-oom-reaper-unmap +++ a/mm/mmap.c @@ -3024,6 +3024,32 @@ void exit_mmap(struct mm_struct *mm) /* mm's last user has gone, and its about to be pulled down */ mmu_notifier_release(mm); + if (unlikely(mm_is_oom_victim(mm))) { + /* + * Manually reap the mm to free as much memory as possible. + * Then, as the oom reaper does, set MMF_OOM_SKIP to disregard + * this mm from further consideration. Taking mm->mmap_sem for + * write after setting MMF_OOM_SKIP will guarantee that the oom + * reaper will not run on this mm again after mmap_sem is + * dropped. + * + * Nothing can be holding mm->mmap_sem here and the above call + * to mmu_notifier_release(mm) ensures mmu notifier callbacks in + * __oom_reap_task_mm() will not block. + * + * This needs to be done before calling munlock_vma_pages_all(), + * which clears VM_LOCKED, otherwise the oom reaper cannot + * reliably test it. + */ + mutex_lock(&oom_lock); + __oom_reap_task_mm(mm); + mutex_unlock(&oom_lock); + + set_bit(MMF_OOM_SKIP, &mm->flags); + down_write(&mm->mmap_sem); + up_write(&mm->mmap_sem); + } + if (mm->locked_vm) { vma = mm->mmap; while (vma) { @@ -3045,24 +3071,6 @@ void exit_mmap(struct mm_struct *mm) /* update_hiwater_rss(mm) here? but nobody should be looking */ /* Use -1 here to ensure all VMAs in the mm are unmapped */ unmap_vmas(&tlb, vma, 0, -1); - - if (unlikely(mm_is_oom_victim(mm))) { - /* - * Wait for oom_reap_task() to stop working on this - * mm. Because MMF_OOM_SKIP is already set before - * calling down_read(), oom_reap_task() will not run - * on this "mm" post up_write(). - * - * mm_is_oom_victim() cannot be set from under us - * either because victim->mm is already set to NULL - * under task_lock before calling mmput and oom_mm is - * set not NULL by the OOM killer only if victim->mm - * is found not NULL while holding the task_lock. - */ - set_bit(MMF_OOM_SKIP, &mm->flags); - down_write(&mm->mmap_sem); - up_write(&mm->mmap_sem); - } free_pgtables(&tlb, vma, FIRST_USER_ADDRESS, USER_PGTABLES_CEILING); tlb_finish_mmu(&tlb, 0, -1); diff -puN mm/oom_kill.c~mm-oom-fix-concurrent-munlock-and-oom-reaper-unmap mm/oom_kill.c --- a/mm/oom_kill.c~mm-oom-fix-concurrent-munlock-and-oom-reaper-unmap +++ a/mm/oom_kill.c @@ -469,7 +469,6 @@ bool process_shares_mm(struct task_struc return false; } - #ifdef CONFIG_MMU /* * OOM Reaper kernel thread which tries to reap the memory used by the OOM @@ -480,16 +479,54 @@ static DECLARE_WAIT_QUEUE_HEAD(oom_reape static struct task_struct *oom_reaper_list; static DEFINE_SPINLOCK(oom_reaper_lock); -static bool __oom_reap_task_mm(struct task_struct *tsk, struct mm_struct *mm) +void __oom_reap_task_mm(struct mm_struct *mm) { - struct mmu_gather tlb; struct vm_area_struct *vma; + + /* + * Tell all users of get_user/copy_from_user etc... that the content + * is no longer stable. No barriers really needed because unmapping + * should imply barriers already and the reader would hit a page fault + * if it stumbled over a reaped memory. + */ + set_bit(MMF_UNSTABLE, &mm->flags); + + for (vma = mm->mmap ; vma; vma = vma->vm_next) { + if (!can_madv_dontneed_vma(vma)) + continue; + + /* + * Only anonymous pages have a good chance to be dropped + * without additional steps which we cannot afford as we + * are OOM already. + * + * We do not even care about fs backed pages because all + * which are reclaimable have already been reclaimed and + * we do not want to block exit_mmap by keeping mm ref + * count elevated without a good reason. + */ + if (vma_is_anonymous(vma) || !(vma->vm_flags & VM_SHARED)) { + const unsigned long start = vma->vm_start; + const unsigned long end = vma->vm_end; + struct mmu_gather tlb; + + tlb_gather_mmu(&tlb, mm, start, end); + mmu_notifier_invalidate_range_start(mm, start, end); + unmap_page_range(&tlb, vma, start, end, NULL); + mmu_notifier_invalidate_range_end(mm, start, end); + tlb_finish_mmu(&tlb, start, end); + } + } +} + +static bool oom_reap_task_mm(struct task_struct *tsk, struct mm_struct *mm) +{ bool ret = true; /* * We have to make sure to not race with the victim exit path * and cause premature new oom victim selection: - * __oom_reap_task_mm exit_mm + * oom_reap_task_mm exit_mm * mmget_not_zero * mmput * atomic_dec_and_test @@ -534,39 +571,8 @@ static bool __oom_reap_task_mm(struct ta trace_start_task_reaping(tsk->pid); - /* - * Tell all users of get_user/copy_from_user etc... that the content - * is no longer stable. No barriers really needed because unmapping - * should imply barriers already and the reader would hit a page fault - * if it stumbled over a reaped memory. - */ - set_bit(MMF_UNSTABLE, &mm->flags); - - for (vma = mm->mmap ; vma; vma = vma->vm_next) { - if (!can_madv_dontneed_vma(vma)) - continue; + __oom_reap_task_mm(mm); - /* - * Only anonymous pages have a good chance to be dropped - * without additional steps which we cannot afford as we - * are OOM already. - * - * We do not even care about fs backed pages because all - * which are reclaimable have already been reclaimed and - * we do not want to block exit_mmap by keeping mm ref - * count elevated without a good reason. - */ - if (vma_is_anonymous(vma) || !(vma->vm_flags & VM_SHARED)) { - const unsigned long start = vma->vm_start; - const unsigned long end = vma->vm_end; - - tlb_gather_mmu(&tlb, mm, start, end); - mmu_notifier_invalidate_range_start(mm, start, end); - unmap_page_range(&tlb, vma, start, end, NULL); - mmu_notifier_invalidate_range_end(mm, start, end); - tlb_finish_mmu(&tlb, start, end); - } - } pr_info("oom_reaper: reaped process %d (%s), now anon-rss:%lukB, file-rss:%lukB, shmem-rss:%lukB\n", task_pid_nr(tsk), tsk->comm, K(get_mm_counter(mm, MM_ANONPAGES)), @@ -587,14 +593,13 @@ static void oom_reap_task(struct task_st struct mm_struct *mm = tsk->signal->oom_mm; /* Retry the down_read_trylock(mmap_sem) a few times */ - while (attempts++ < MAX_OOM_REAP_RETRIES && !__oom_reap_task_mm(tsk, mm)) + while (attempts++ < MAX_OOM_REAP_RETRIES && !oom_reap_task_mm(tsk, mm)) schedule_timeout_idle(HZ/10); if (attempts <= MAX_OOM_REAP_RETRIES || test_bit(MMF_OOM_SKIP, &mm->flags)) goto done; - pr_info("oom_reaper: unable to reap pid:%d (%s)\n", task_pid_nr(tsk), tsk->comm); debug_show_all_locks(); _ Patches currently in -mm which might be from rientjes(a)google.com are

7 years, 1 month

1
0
0 0

[merged] mm-sections-are-not-offlined-during-memory-hotremove.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: mm: sections are not offlined during memory hotremove has been removed from the -mm tree. Its filename was mm-sections-are-not-offlined-during-memory-hotremove.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Pavel Tatashin <pasha.tatashin(a)oracle.com> Subject: mm: sections are not offlined during memory hotremove Memory hotplug and hotremove operate with per-block granularity. If the machine has a large amount of memory (more than 64G), the size of a memory block can span multiple sections. By mistake, during hotremove we set only the first section to offline state. The bug was discovered because kernel selftest started to fail: https://lkml.kernel.org/r/20180423011247.GK5563@yexl-desktop After commit, "mm/memory_hotplug: optimize probe routine". But, the bug is older than this commit. In this optimization we also added a check for sections to be in a proper state during hotplug operation. Link: http://lkml.kernel.org/r/20180427145257.15222-1-pasha.tatashin@oracle.com Fixes: 2d070eab2e82 ("mm: consider zone which is not fully populated to have holes") Signed-off-by: Pavel Tatashin <pasha.tatashin(a)oracle.com> Acked-by: Michal Hocko <mhocko(a)suse.com> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Cc: Vlastimil Babka <vbabka(a)suse.cz> Cc: Steven Sistare <steven.sistare(a)oracle.com> Cc: Daniel Jordan <daniel.m.jordan(a)oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/sparse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff -puN mm/sparse.c~mm-sections-are-not-offlined-during-memory-hotremove mm/sparse.c --- a/mm/sparse.c~mm-sections-are-not-offlined-during-memory-hotremove +++ a/mm/sparse.c @@ -629,7 +629,7 @@ void offline_mem_sections(unsigned long unsigned long pfn; for (pfn = start_pfn; pfn < end_pfn; pfn += PAGES_PER_SECTION) { - unsigned long section_nr = pfn_to_section_nr(start_pfn); + unsigned long section_nr = pfn_to_section_nr(pfn); struct mem_section *ms; /* _ Patches currently in -mm which might be from pasha.tatashin(a)oracle.com are mm-allow-deferred-page-init-for-vmemmap-only.patch sparc64-ng4-memset-32-bits-overflow.patch

7 years, 1 month

1
0
0 0

[merged] z3fold-fix-reclaim-lock-ups.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: z3fold: fix reclaim lock-ups has been removed from the -mm tree. Its filename was z3fold-fix-reclaim-lock-ups.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Vitaly Wool <vitalywool(a)gmail.com> Subject: z3fold: fix reclaim lock-ups Do not try to optimize in-page object layout while the page is under reclaim. This fixes lock-ups on reclaim and improves reclaim performance at the same time. [akpm(a)linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20180430125800.444cae9706489f412ad12621@gmail.com Signed-off-by: Vitaly Wool <vitaly.vul(a)sony.com> Reported-by: Guenter Roeck <linux(a)roeck-us.net> Tested-by: Guenter Roeck <linux(a)roeck-us.net> Cc: <Oleksiy.Avramchenko(a)sony.com> Cc: Matthew Wilcox <mawilcox(a)microsoft.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/z3fold.c | 42 ++++++++++++++++++++++++++++++------------ 1 file changed, 30 insertions(+), 12 deletions(-) diff -puN mm/z3fold.c~z3fold-fix-reclaim-lock-ups mm/z3fold.c --- a/mm/z3fold.c~z3fold-fix-reclaim-lock-ups +++ a/mm/z3fold.c @@ -144,7 +144,8 @@ enum z3fold_page_flags { PAGE_HEADLESS = 0, MIDDLE_CHUNK_MAPPED, NEEDS_COMPACTING, - PAGE_STALE + PAGE_STALE, + UNDER_RECLAIM }; /***************** @@ -173,6 +174,7 @@ static struct z3fold_header *init_z3fold clear_bit(MIDDLE_CHUNK_MAPPED, &page->private); clear_bit(NEEDS_COMPACTING, &page->private); clear_bit(PAGE_STALE, &page->private); + clear_bit(UNDER_RECLAIM, &page->private); spin_lock_init(&zhdr->page_lock); kref_init(&zhdr->refcount); @@ -756,6 +758,10 @@ static void z3fold_free(struct z3fold_po atomic64_dec(&pool->pages_nr); return; } + if (test_bit(UNDER_RECLAIM, &page->private)) { + z3fold_page_unlock(zhdr); + return; + } if (test_and_set_bit(NEEDS_COMPACTING, &page->private)) { z3fold_page_unlock(zhdr); return; @@ -840,6 +846,8 @@ static int z3fold_reclaim_page(struct z3 kref_get(&zhdr->refcount); list_del_init(&zhdr->buddy); zhdr->cpu = -1; + set_bit(UNDER_RECLAIM, &page->private); + break; } list_del_init(&page->lru); @@ -887,25 +895,35 @@ static int z3fold_reclaim_page(struct z3 goto next; } next: - spin_lock(&pool->lock); if (test_bit(PAGE_HEADLESS, &page->private)) { if (ret == 0) { - spin_unlock(&pool->lock); free_z3fold_page(page); return 0; } - } else if (kref_put(&zhdr->refcount, release_z3fold_page)) { - atomic64_dec(&pool->pages_nr); + spin_lock(&pool->lock); + list_add(&page->lru, &pool->lru); + spin_unlock(&pool->lock); + } else { + z3fold_page_lock(zhdr); + clear_bit(UNDER_RECLAIM, &page->private); + if (kref_put(&zhdr->refcount, + release_z3fold_page_locked)) { + atomic64_dec(&pool->pages_nr); + return 0; + } + /* + * if we are here, the page is still not completely + * free. Take the global pool lock then to be able + * to add it back to the lru list + */ + spin_lock(&pool->lock); + list_add(&page->lru, &pool->lru); spin_unlock(&pool->lock); - return 0; + z3fold_page_unlock(zhdr); } - /* - * Add to the beginning of LRU. - * Pool lock has to be kept here to ensure the page has - * not already been released - */ - list_add(&page->lru, &pool->lru); + /* We started off locked to we need to lock the pool back */ + spin_lock(&pool->lock); } spin_unlock(&pool->lock); return -EAGAIN; _ Patches currently in -mm which might be from vitalywool(a)gmail.com are

7 years, 1 month

1
0
0 0

patch "serial: 8250: omap: Fix idling of clocks for unused uarts" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: 8250: omap: Fix idling of clocks for unused uarts to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From 13dc04d0e5fdc25c8f713ad23fdce51cf2bf96ba Mon Sep 17 00:00:00 2001 From: Tony Lindgren <tony(a)atomide.com> Date: Fri, 4 May 2018 10:44:09 -0700 Subject: serial: 8250: omap: Fix idling of clocks for unused uarts I noticed that unused UARTs won't necessarily idle properly always unless at least one byte tx transfer is done first. After some debugging I narrowed down the problem to the scr register dma configuration bits that need to be set before softreset for the clocks to idle. Unless we do this, the module clkctrl idlest bits may be set to 1 instead of 3 meaning the clock will never idle and is blocking deeper idle states for the whole domain. This might be related to the configuration done by the bootloader or kexec booting where certain configurations cause the 8250 or the clkctrl clock to jam in a way where setting of the scr bits and reset is needed to clear it. I've tried diffing the 8250 registers for the various modes, but did not see anything specific. So far I've only seen this on omap4 but I'm suspecting this might also happen on the other clkctrl using SoCs considering they already have a quirk enabled for UART_ERRATA_CLOCK_DISABLE. Let's fix the issue by configuring scr before reset for basic dma even if we don't use it. The scr register will be reset when we do softreset few lines after, and we restore scr on resume. We should do this for all the SoCs with UART_ERRATA_CLOCK_DISABLE quirk flag set since the ones with UART_ERRATA_CLOCK_DISABLE are all based using clkctrl similar to omap4. Looks like both OMAP_UART_SCR_DMAMODE_1 | OMAP_UART_SCR_DMAMODE_CTL bits are needed for the clkctrl to idle after a softreset. And we need to add omap4 to also use the UART_ERRATA_CLOCK_DISABLE for the related workaround to be enabled. This same compatible value will also be used for omap5. Fixes: cdb929e4452a ("serial: 8250_omap: workaround errata around idling UART after using DMA") Cc: Keerthy <j-keerthy(a)ti.com> Cc: Matthijs van Duin <matthijsvanduin(a)gmail.com> Cc: Sekhar Nori <nsekhar(a)ti.com> Cc: Tero Kristo <t-kristo(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/8250/8250_omap.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 6aaa84355fd1..1b337fee07ed 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1110,13 +1110,14 @@ static int omap8250_no_handle_irq(struct uart_port *port) return 0; } +static const u8 omap4_habit = UART_ERRATA_CLOCK_DISABLE; static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE; static const u8 dra742_habit = UART_ERRATA_CLOCK_DISABLE; static const struct of_device_id omap8250_dt_ids[] = { { .compatible = "ti,omap2-uart" }, { .compatible = "ti,omap3-uart" }, - { .compatible = "ti,omap4-uart" }, + { .compatible = "ti,omap4-uart", .data = &omap4_habit, }, { .compatible = "ti,am3352-uart", .data = &am3352_habit, }, { .compatible = "ti,am4372-uart", .data = &am3352_habit, }, { .compatible = "ti,dra742-uart", .data = &dra742_habit, }, @@ -1362,6 +1363,19 @@ static int omap8250_soft_reset(struct device *dev) int sysc; int syss; + /* + * At least on omap4, unused uarts may not idle after reset without + * a basic scr dma configuration even with no dma in use. The + * module clkctrl status bits will be 1 instead of 3 blocking idle + * for the whole clockdomain. The softreset below will clear scr, + * and we restore it on resume so this is safe to do on all SoCs + * needing omap8250_soft_reset() quirk. Do it in two writes as + * recommended in the comment for omap8250_update_scr(). + */ + serial_out(up, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1); + serial_out(up, UART_OMAP_SCR, + OMAP_UART_SCR_DMAMODE_1 | OMAP_UART_SCR_DMAMODE_CTL); + sysc = serial_in(up, UART_OMAP_SYSC); /* softreset the UART */ -- 2.17.0

7 years, 1 month

1
0
0 0

patch "serial: samsung: fix maxburst parameter for DMA transactions" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: samsung: fix maxburst parameter for DMA transactions to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From aa2f80e752c75e593b3820f42c416ed9458fa73e Mon Sep 17 00:00:00 2001 From: Marek Szyprowski <m.szyprowski(a)samsung.com> Date: Thu, 10 May 2018 08:41:13 +0200 Subject: serial: samsung: fix maxburst parameter for DMA transactions The best granularity of residue that DMA engine can report is in the BURST units, so the serial driver must use MAXBURST = 1 and DMA_SLAVE_BUSWIDTH_1_BYTE if it relies on exact number of bytes transferred by DMA engine. Fixes: 62c37eedb74c ("serial: samsung: add dma reqest/release functions") Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Acked-by: Krzysztof Kozlowski <krzk(a)kernel.org> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/samsung.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 3f2f8c118ce0..64e96926f1ad 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -862,15 +862,12 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) dma->rx_conf.direction = DMA_DEV_TO_MEM; dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH; - dma->rx_conf.src_maxburst = 16; + dma->rx_conf.src_maxburst = 1; dma->tx_conf.direction = DMA_MEM_TO_DEV; dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH; - if (dma_get_cache_alignment() >= 16) - dma->tx_conf.dst_maxburst = 16; - else - dma->tx_conf.dst_maxburst = 1; + dma->tx_conf.dst_maxburst = 1; dma->rx_chan = dma_request_chan(p->port.dev, "rx"); -- 2.17.0

7 years, 1 month

1
0
0 0

patch "tty: pl011: Avoid spuriously stuck-off interrupts" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tty: pl011: Avoid spuriously stuck-off interrupts to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From 4a7e625ce50412a7711efa0f2ef0b96ce3826759 Mon Sep 17 00:00:00 2001 From: Dave Martin <Dave.Martin(a)arm.com> Date: Thu, 10 May 2018 18:08:23 +0100 Subject: tty: pl011: Avoid spuriously stuck-off interrupts Commit 9b96fbacda34 ("serial: PL011: clear pending interrupts") clears the RX and receive timeout interrupts on pl011 startup, to avoid a screaming-interrupt scenario that can occur when the firmware or bootloader leaves these interrupts asserted. This has been noted as an issue when running Linux on qemu [1]. Unfortunately, the above fix seems to lead to potential misbehaviour if the RX FIFO interrupt is asserted _non_ spuriously on driver startup, if the RX FIFO is also already full to the trigger level. Clearing the RX FIFO interrupt does not change the FIFO fill level. In this scenario, because the interrupt is now clear and because the FIFO is already full to the trigger level, no new assertion of the RX FIFO interrupt can occur unless the FIFO is drained back below the trigger level. This never occurs because the pl011 driver is waiting for an RX FIFO interrupt to tell it that there is something to read, and does not read the FIFO at all until that interrupt occurs. Thus, simply clearing "spurious" interrupts on startup may be misguided, since there is no way to be sure that the interrupts are truly spurious, and things can go wrong if they are not. This patch instead clears the interrupt condition by draining the RX FIFO during UART startup, after clearing any potentially spurious interrupt. This should ensure that an interrupt will definitely be asserted if the RX FIFO subsequently becomes sufficiently full. The drain is done at the point of enabling interrupts only. This means that it will occur any time the UART is newly opened through the tty layer. It will not apply to polled-mode use of the UART by kgdboc: since that scenario cannot use interrupts by design, this should not matter. kgdboc will interact badly with "normal" use of the UART in any case: this patch makes no attempt to paper over such issues. This patch does not attempt to address the case where the RX FIFO fills faster than it can be drained: that is a pathological hardware design problem that is beyond the scope of the driver to work around. As a failsafe, the number of poll iterations for draining the FIFO is limited to twice the FIFO size. This will ensure that the kernel at least boots even if it is impossible to drain the FIFO for some reason. [1] [Qemu-devel] [Qemu-arm] [PATCH] pl011: do not put into fifo before enabled the interruption https://lists.gnu.org/archive/html/qemu-devel/2018-01/msg06446.html Reported-by: Wei Xu <xuwei5(a)hisilicon.com> Cc: Russell King <linux(a)armlinux.org.uk> Cc: Linus Walleij <linus.walleij(a)linaro.org> Cc: Peter Maydell <peter.maydell(a)linaro.org> Fixes: 9b96fbacda34 ("serial: PL011: clear pending interrupts") Signed-off-by: Dave Martin <Dave.Martin(a)arm.com> Cc: stable <stable(a)vger.kernel.org> Tested-by: Wei Xu <xuwei5(a)hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/amba-pl011.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 4b40a5b449ee..ebd33c0232e6 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1727,10 +1727,26 @@ static int pl011_allocate_irq(struct uart_amba_port *uap) */ static void pl011_enable_interrupts(struct uart_amba_port *uap) { + unsigned int i; + spin_lock_irq(&uap->port.lock); /* Clear out any spuriously appearing RX interrupts */ pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR); + + /* + * RXIS is asserted only when the RX FIFO transitions from below + * to above the trigger threshold. If the RX FIFO is already + * full to the threshold this can't happen and RXIS will now be + * stuck off. Drain the RX FIFO explicitly to fix this: + */ + for (i = 0; i < uap->fifosize * 2; ++i) { + if (pl011_read(uap, REG_FR) & UART01x_FR_RXFE) + break; + + pl011_read(uap, REG_DR); + } + uap->im = UART011_RTIM; if (!pl011_dma_rx_running(uap)) uap->im |= UART011_RXIM; -- 2.17.0

7 years, 1 month

1
0
0 0

patch "driver core: Don't ignore class_dir_create_and_add() failure." added to driver-core-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled driver core: Don't ignore class_dir_create_and_add() failure. to my driver-core git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git in the driver-core-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From 84d0c27d6233a9ba0578b20f5a09701eb66cee42 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> Date: Mon, 7 May 2018 19:10:31 +0900 Subject: driver core: Don't ignore class_dir_create_and_add() failure. syzbot is hitting WARN() at kernfs_add_one() [1]. This is because kernfs_create_link() is confused by previous device_add() call which continued without setting dev->kobj.parent field when get_device_parent() failed by memory allocation fault injection. Fix this by propagating the error from class_dir_create_and_add() to the calllers of get_device_parent(). [1] https://syzkaller.appspot.com/bug?id=fae0fb607989ea744526d1c082a5b8de652911… Signed-off-by: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+df47f81c226b31d89fb1(a)syzkaller.appspotmail.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/base/core.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index b610816eb887..d680fd030316 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1467,7 +1467,7 @@ class_dir_create_and_add(struct class *class, struct kobject *parent_kobj) dir = kzalloc(sizeof(*dir), GFP_KERNEL); if (!dir) - return NULL; + return ERR_PTR(-ENOMEM); dir->class = class; kobject_init(&dir->kobj, &class_dir_ktype); @@ -1477,7 +1477,7 @@ class_dir_create_and_add(struct class *class, struct kobject *parent_kobj) retval = kobject_add(&dir->kobj, parent_kobj, "%s", class->name); if (retval < 0) { kobject_put(&dir->kobj); - return NULL; + return ERR_PTR(retval); } return &dir->kobj; } @@ -1784,6 +1784,10 @@ int device_add(struct device *dev) parent = get_device(dev->parent); kobj = get_device_parent(dev, parent); + if (IS_ERR(kobj)) { + error = PTR_ERR(kobj); + goto parent_error; + } if (kobj) dev->kobj.parent = kobj; @@ -1882,6 +1886,7 @@ int device_add(struct device *dev) kobject_del(&dev->kobj); Error: cleanup_glue_dir(dev, glue_dir); +parent_error: put_device(parent); name_error: kfree(dev->p); @@ -2701,6 +2706,11 @@ int device_move(struct device *dev, struct device *new_parent, device_pm_lock(); new_parent = get_device(new_parent); new_parent_kobj = get_device_parent(dev, new_parent); + if (IS_ERR(new_parent_kobj)) { + error = PTR_ERR(new_parent_kobj); + put_device(new_parent); + goto out; + } pr_debug("device: '%s': %s: moving to '%s'\n", dev_name(dev), __func__, new_parent ? dev_name(new_parent) : "<NULL>"); -- 2.17.0

7 years, 1 month

1
0
0 0

patch "1wire: family module autoload fails because of upper/lower case" added to char-misc-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled 1wire: family module autoload fails because of upper/lower case to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From 065c09563c872e52813a17218c52cd642be1dca6 Mon Sep 17 00:00:00 2001 From: Ingo Flaschberger <ingo.flaschberger(a)gmail.com> Date: Tue, 1 May 2018 16:10:33 +0200 Subject: 1wire: family module autoload fails because of upper/lower case mismatch. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 1wire family module autoload fails because of upper/lower case mismatch. Signed-off-by: Ingo Flaschberger <ingo.flaschberger(a)gmail.com> Acked-by: Evgeniy Polyakov <zbr(a)ioremap.net> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/w1/w1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 80a778b02f28..caef0e0fd817 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -751,7 +751,7 @@ int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn) /* slave modules need to be loaded in a context with unlocked mutex */ mutex_unlock(&dev->mutex); - request_module("w1-family-0x%02x", rn->family); + request_module("w1-family-0x%02X", rn->family); mutex_lock(&dev->mutex); spin_lock(&w1_flock); -- 2.17.0

7 years, 1 month

1
0
0 0

patch "w1: mxc_w1: Enable clock before calling clk_get_rate() on it" added to char-misc-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled w1: mxc_w1: Enable clock before calling clk_get_rate() on it to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From 955bc61328dc0a297fb3baccd84e9d3aee501ed8 Mon Sep 17 00:00:00 2001 From: Stefan Potyra <Stefan.Potyra(a)elektrobit.com> Date: Wed, 2 May 2018 10:55:31 +0200 Subject: w1: mxc_w1: Enable clock before calling clk_get_rate() on it According to the API, you may only call clk_get_rate() after actually enabling it. Found by Linux Driver Verification project (linuxtesting.org). Fixes: a5fd9139f74c ("w1: add 1-wire master driver for i.MX27 / i.MX31") Signed-off-by: Stefan Potyra <Stefan.Potyra(a)elektrobit.com> Acked-by: Evgeniy Polyakov <zbr(a)ioremap.net> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/w1/masters/mxc_w1.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c index 74f2e6e6202a..8851d441e5fd 100644 --- a/drivers/w1/masters/mxc_w1.c +++ b/drivers/w1/masters/mxc_w1.c @@ -112,6 +112,10 @@ static int mxc_w1_probe(struct platform_device *pdev) if (IS_ERR(mdev->clk)) return PTR_ERR(mdev->clk); + err = clk_prepare_enable(mdev->clk); + if (err) + return err; + clkrate = clk_get_rate(mdev->clk); if (clkrate < 10000000) dev_warn(&pdev->dev, @@ -125,12 +129,10 @@ static int mxc_w1_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); mdev->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(mdev->regs)) - return PTR_ERR(mdev->regs); - - err = clk_prepare_enable(mdev->clk); - if (err) - return err; + if (IS_ERR(mdev->regs)) { + err = PTR_ERR(mdev->regs); + goto out_disable_clk; + } /* Software reset 1-Wire module */ writeb(MXC_W1_RESET_RST, mdev->regs + MXC_W1_RESET); @@ -146,8 +148,12 @@ static int mxc_w1_probe(struct platform_device *pdev) err = w1_add_master_device(&mdev->bus_master); if (err) - clk_disable_unprepare(mdev->clk); + goto out_disable_clk; + return 0; + +out_disable_clk: + clk_disable_unprepare(mdev->clk); return err; } -- 2.17.0

7 years, 1 month

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror