The DMC FW specific part of display WA#1183 is supposed to be enabled
whenever enabling DC5 or DC6, so move it to the DC6 enable function
from the DC6 disable function.
I noticed this after Daniel's patch to remove the unused
skl_disable_dc6() function.
Fixes: 53421c2fe99c ("drm/i915: Apply Display WA #1183 on skl, kbl, and cfl")
Cc: Lucas De Marchi <lucas.demarchi(a)intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi(a)intel.com>
Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com>
Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak(a)intel.com>
---
drivers/gpu/drm/i915/intel_runtime_pm.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 53ea564f971e..66de4b2dc8b7 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -641,19 +641,18 @@ void skl_enable_dc6(struct drm_i915_private *dev_priv)
DRM_DEBUG_KMS("Enabling DC6\n");
- gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
+ /* Wa Display #1183: skl,kbl,cfl */
+ if (IS_GEN9_BC(dev_priv))
+ I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) |
+ SKL_SELECT_ALTERNATE_DC_EXIT);
+ gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
}
void skl_disable_dc6(struct drm_i915_private *dev_priv)
{
DRM_DEBUG_KMS("Disabling DC6\n");
- /* Wa Display #1183: skl,kbl,cfl */
- if (IS_GEN9_BC(dev_priv))
- I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) |
- SKL_SELECT_ALTERNATE_DC_EXIT);
-
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
}
--
2.13.2
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From d7119224bfe6e8efbf821a52db7da9530d790f07 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens(a)csie.org>
Date: Fri, 19 Jan 2018 17:25:41 +0800
Subject: [PATCH] phy: allwinner: sun4i-usb: poll vbus changes on A23/A33 when
driving VBUS
The AXP223 PMIC, like the AXP221, does not generate VBUS change
interrupts when N_VBUSEN is used to drive VBUS for the OTG port
on the board.
This was not noticed until recently, as most A23/A33 boards use
a GPIO pin that does not support interrupts for OTG ID detection.
This forces the driver to use polling. However the A33-OlinuXino
uses a pin that does support interrupts, so the driver uses them.
However the VBUS interrupt never fires, and the driver never gets
to update the VBUS status. This results in musb timing out waiting
for VBUS to rise.
This was worked around for the AXP221 by resorting to polling
changes in commit 91d96f06a760 ("phy-sun4i-usb: Add workaround for
missing Vbus det interrupts on A31"). This patch adds the A23 and
A33 to the list of SoCs that need the workaround.
Fixes: fc1f45ed3043 ("phy-sun4i-usb: Add support for the usb-phys on the
sun8i-a33 SoC")
Fixes: 123dfdbcfaf5 ("phy-sun4i-usb: Add support for the usb-phys on the
sun8i-a23 SoC")
Cc: <stable(a)vger.kernel.org> # 4.3.x: 68dbc2ce77bb phy-sun4i-usb:
Use of_match_node to get model specific config data
Cc: <stable(a)vger.kernel.org> # 4.3.x: 5cf700ac9d50 phy: phy-sun4i-usb:
Fix optional gpios failing probe
Cc: <stable(a)vger.kernel.org> # 4.3.x: 04e59a0211ff phy-sun4i-usb:
Fix irq free conditions to match request conditions
Cc: <stable(a)vger.kernel.org> # 4.3.x: 91d96f06a760 phy-sun4i-usb:
Add workaround for missing Vbus det interrupts on A31
Cc: <stable(a)vger.kernel.org> # 4.3.x
Signed-off-by: Chen-Yu Tsai <wens(a)csie.org>
Acked-by: Maxime Ripard <maxime.ripard(a)free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com>
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index bee798892b21..d4dcd39b8d76 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -411,11 +411,13 @@ static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data)
return true;
/*
- * The A31 companion pmic (axp221) does not generate vbus change
- * interrupts when the board is driving vbus, so we must poll
+ * The A31/A23/A33 companion pmics (AXP221/AXP223) do not
+ * generate vbus change interrupts when the board is driving
+ * vbus using the N_VBUSEN pin on the pmic, so we must poll
* when using the pmic for vbus-det _and_ we're driving vbus.
*/
- if (data->cfg->type == sun6i_a31_phy &&
+ if ((data->cfg->type == sun6i_a31_phy ||
+ data->cfg->type == sun8i_a33_phy) &&
data->vbus_power_supply && data->phys[0].regulator_on)
return true;
@@ -886,7 +888,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.num_phys = 2,
- .type = sun4i_a10_phy,
+ .type = sun6i_a31_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From d7119224bfe6e8efbf821a52db7da9530d790f07 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens(a)csie.org>
Date: Fri, 19 Jan 2018 17:25:41 +0800
Subject: [PATCH] phy: allwinner: sun4i-usb: poll vbus changes on A23/A33 when
driving VBUS
The AXP223 PMIC, like the AXP221, does not generate VBUS change
interrupts when N_VBUSEN is used to drive VBUS for the OTG port
on the board.
This was not noticed until recently, as most A23/A33 boards use
a GPIO pin that does not support interrupts for OTG ID detection.
This forces the driver to use polling. However the A33-OlinuXino
uses a pin that does support interrupts, so the driver uses them.
However the VBUS interrupt never fires, and the driver never gets
to update the VBUS status. This results in musb timing out waiting
for VBUS to rise.
This was worked around for the AXP221 by resorting to polling
changes in commit 91d96f06a760 ("phy-sun4i-usb: Add workaround for
missing Vbus det interrupts on A31"). This patch adds the A23 and
A33 to the list of SoCs that need the workaround.
Fixes: fc1f45ed3043 ("phy-sun4i-usb: Add support for the usb-phys on the
sun8i-a33 SoC")
Fixes: 123dfdbcfaf5 ("phy-sun4i-usb: Add support for the usb-phys on the
sun8i-a23 SoC")
Cc: <stable(a)vger.kernel.org> # 4.3.x: 68dbc2ce77bb phy-sun4i-usb:
Use of_match_node to get model specific config data
Cc: <stable(a)vger.kernel.org> # 4.3.x: 5cf700ac9d50 phy: phy-sun4i-usb:
Fix optional gpios failing probe
Cc: <stable(a)vger.kernel.org> # 4.3.x: 04e59a0211ff phy-sun4i-usb:
Fix irq free conditions to match request conditions
Cc: <stable(a)vger.kernel.org> # 4.3.x: 91d96f06a760 phy-sun4i-usb:
Add workaround for missing Vbus det interrupts on A31
Cc: <stable(a)vger.kernel.org> # 4.3.x
Signed-off-by: Chen-Yu Tsai <wens(a)csie.org>
Acked-by: Maxime Ripard <maxime.ripard(a)free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com>
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index bee798892b21..d4dcd39b8d76 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -411,11 +411,13 @@ static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data)
return true;
/*
- * The A31 companion pmic (axp221) does not generate vbus change
- * interrupts when the board is driving vbus, so we must poll
+ * The A31/A23/A33 companion pmics (AXP221/AXP223) do not
+ * generate vbus change interrupts when the board is driving
+ * vbus using the N_VBUSEN pin on the pmic, so we must poll
* when using the pmic for vbus-det _and_ we're driving vbus.
*/
- if (data->cfg->type == sun6i_a31_phy &&
+ if ((data->cfg->type == sun6i_a31_phy ||
+ data->cfg->type == sun8i_a33_phy) &&
data->vbus_power_supply && data->phys[0].regulator_on)
return true;
@@ -886,7 +888,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.num_phys = 2,
- .type = sun4i_a10_phy,
+ .type = sun6i_a31_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
File /sys/kernel/debug/kprobes/blacklist displays random addresses:
[root@s8360046 linux]# cat /sys/kernel/debug/kprobes/blacklist
0x0000000047149a90-0x00000000bfcb099a print_type_x8
....
This breaks 'perf probe' which uses the blacklist file to prohibit
probes on certain functions by checking the address range.
Fix this by printing the correct (unhashed) address.
The file mode is read all but this is not an issue as the file
hierarchy points out:
# ls -ld /sys/ /sys/kernel/ /sys/kernel/debug/ /sys/kernel/debug/kprobes/
/sys/kernel/debug/kprobes/blacklist
dr-xr-xr-x 12 root root 0 Apr 19 07:56 /sys/
drwxr-xr-x 8 root root 0 Apr 19 07:56 /sys/kernel/
drwx------ 16 root root 0 Apr 19 06:56 /sys/kernel/debug/
drwxr-xr-x 2 root root 0 Apr 19 06:56 /sys/kernel/debug/kprobes/
-r--r--r-- 1 root root 0 Apr 19 06:56 /sys/kernel/debug/kprobes/blacklist
Everything in and below /sys/kernel/debug is rwx to root only,
no group or others have access.
Background:
Directory /sys/kernel/debug/kprobes is created by debugfs_create_dir()
which sets the mode bits to rwxr-xr-x. Maybe change that to use the
parent's directory mode bits instead?
Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Cc: <stable(a)vger.kernel.org> # v4.15+
Cc: Ananth N Mavinakayanahalli <ananth(a)linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy(a)intel.com>
Cc: David S Miller <davem(a)davemloft.net>
Cc: Masami Hiramatsu <mhiramat(a)kernel.org>
Cc: acme(a)kernel.org
Cc: Steven Rostedt <rostedt(a)goodmis.org>
Signed-off-by: Thomas Richter <tmricht(a)linux.ibm.com>
---
kernel/kprobes.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 102160ff5c66..ea619021d901 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -2428,7 +2428,7 @@ static int kprobe_blacklist_seq_show(struct seq_file *m, void *v)
struct kprobe_blacklist_entry *ent =
list_entry(v, struct kprobe_blacklist_entry, list);
- seq_printf(m, "0x%p-0x%p\t%ps\n", (void *)ent->start_addr,
+ seq_printf(m, "0x%px-0x%px\t%ps\n", (void *)ent->start_addr,
(void *)ent->end_addr, (void *)ent->start_addr);
return 0;
}
--
2.14.3