- Linux-stable-mirror - lists.linaro.org

by Sasha Levin

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi Greg, Pleae pull commits for Linux 4.14 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit 3b65f403d7d0e98484e8f2c9471808f2785a8235: Linux 4.14.73 (2018-09-29 03:06:07 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-4.14-01102018 for you to fetch changes up to edfbb55326888cde6bedb15fe7453e7f198559db: x86/pti: Fix section mismatch warning/error (2018-09-29 13:00:59 -0400) - ---------------------------------------------------------------- for-greg-4.14-01102018 - ---------------------------------------------------------------- Anson Huang (1): thermal: of-thermal: disable passive polling when thermal zone is disabled Bo Chen (2): e1000: check on netif_running() before calling e1000_up() e1000: ensure to free old tx/rx rings in set_ringparam() Dan Carpenter (1): hwmon: (adt7475) Make adt7475_read_word() return errors Eric Sandeen (1): isofs: reject hardware sector size > 2048 bytes Huazhong Tan (2): net: hns: fix length and page_offset overflow when CONFIG_ARM64_64K_PAGES net: hns: fix skb->truesize underestimation James Smart (1): nvme-fcloop: Fix dropped LS's to removed target port John Fastabend (2): tls: possible hang when do_tcp_sendpages hits sndbuf is full case bpf: sockmap: write_space events need to be passed to TCP handler Leonard Crestez (1): Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping" Linus Walleij (1): ata: ftide010: Add a quirk for SQ201 Lothar Felten (1): hwmon: (ina2xx) fix sysfs shunt resistor read access Marc Zyngier (2): arm/arm64: smccc-1.1: Make return values unsigned long arm/arm64: smccc-1.1: Handle function result as parameters Mika Westerberg (1): i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus Randy Dunlap (1): x86/pti: Fix section mismatch warning/error Rex Zhu (2): drm/amdgpu: Enable/disable gfx PG feature in rlc safe mode drm/amdgpu: Update power state at the end of smu hw_init. Srikanth Jampala (1): crypto: cavium/nitrox - fix for command corruption in queue full case with backlog submissions. Tomer Tayar (4): qed: Wait for ready indication before rereading the shmem qed: Wait for MCP halt and resume commands to take place qed: Prevent a possible deadlock during driver load and unload qed: Avoid sending mailbox commands when MFW is not responsive Tony Lindgren (1): ARM: dts: omap4-droid4: Fix emmc errors seen on some devices Documentation/hwmon/ina2xx | 2 +- arch/arm/boot/dts/imx7d.dtsi | 12 +- arch/arm/boot/dts/omap4-droid4-xt894.dts | 2 +- arch/x86/mm/pti.c | 2 +- drivers/ata/pata_ftide010.c | 27 ++-- drivers/crypto/cavium/nitrox/nitrox_dev.h | 3 +- drivers/crypto/cavium/nitrox/nitrox_lib.c | 1 + drivers/crypto/cavium/nitrox/nitrox_reqmgr.c | 57 ++++--- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 11 +- drivers/gpu/drm/amd/amdgpu/kv_dpm.c | 4 +- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 3 +- drivers/hwmon/adt7475.c | 14 +- drivers/hwmon/ina2xx.c | 13 +- drivers/i2c/busses/i2c-i801.c | 9 +- drivers/net/ethernet/hisilicon/hns/hnae.h | 6 +- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 2 +- drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 7 +- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 187 +++++++++++++++++++---- drivers/net/ethernet/qlogic/qed/qed_mcp.h | 27 ++-- drivers/net/ethernet/qlogic/qed/qed_reg_addr.h | 2 + drivers/nvme/target/fcloop.c | 3 +- drivers/thermal/of-thermal.c | 7 +- fs/isofs/inode.c | 7 + include/linux/arm-smccc.h | 38 +++-- include/linux/platform_data/ina2xx.h | 2 +- kernel/bpf/sockmap.c | 3 + net/tls/tls_main.c | 9 +- 27 files changed, 338 insertions(+), 122 deletions(-) -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAluywqIACgkQ3qZv95d3 LNyn8g/8CyhwmJpHasRk5DF07M05Zhjzivz+qN6vOACneDftZzm5ezlX8ayHs4ls C8GlyTPPHwIw36GkTuYf8PopoQTDU8gsbb3yTr/RHFtIQJ3XOCmzAYtbkaQQ4sP2 UsAay4BETeqqYnyniNdcJ1b6dqX0llP6QmrYJg4hWI3B4FqzfWIl0decjX3RLxDB Q/X3c5TvhQMcWSYuKti7M1ULE/AWg9BB2HMg1leJxFpESpF0UTpcVpPq3DMxd3os B4bjBprGeemZ5/ctVG4J2P0uteoGocUS1pcgHgOr20etWdlu1TxtSBoI0THt/9fj ZvbxNGN71Jpkb+wnRC18afPilDNKvLrlaaV65/rjk00Zzs1W0zCXl1zxnImHiCFn kFMLZUv0KPNVYNa4U0HEQRrgf1mrgyncVWmIGLnzuC9hXZtF7UvHliGTr7dXctRX i5FFdYeAk6bAMilNwK3VZyS2gvXU9C/yXz1tqFmhZuDaKsywvtOrfLO+XPLHly+T K532vncSshpmrgPFK9iky/JMHiJ0flmF6CRqVjjd/PQA4wj1W2Np9vg8MtZm2n4N SmYg4FNiKuGeRPaLxwubVVe6iALtfa47ARG67aYYnxRedc2RyK6saaxh3zbmJ7gW kxZScnx0MKVYrNV/IIj3D/Dg/pX3XLIFpMEOwweEGzDwdbD6nxg= =P3AS -----END PGP SIGNATURE-----

7 years, 1 month

1
0
0 0

patch "USB: serial: simple: add Motorola Tetra MTP6550 id" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: simple: add Motorola Tetra MTP6550 id to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From f5fad711c06e652f90f581fc7c2caee327c33d31 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Mon, 24 Sep 2018 15:28:10 +0200 Subject: USB: serial: simple: add Motorola Tetra MTP6550 id Add device-id for the Motorola Tetra radio MTP6550. Bus 001 Device 004: ID 0cad:9012 Motorola CGISS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9012 bcdDevice 24.16 iManufacturer 1 Motorola Solutions, Inc. iProduct 2 TETRA PEI interface iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 55 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 Generic Serial config bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Reported-by: Hans Hult <hanshult35(a)gmail.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/usb-serial-simple.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index 40864c2bd9dc..4d0273508043 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -84,7 +84,8 @@ DEVICE(moto_modem, MOTO_IDS); /* Motorola Tetra driver */ #define MOTOROLA_TETRA_IDS() \ - { USB_DEVICE(0x0cad, 0x9011) } /* Motorola Solutions TETRA PEI */ + { USB_DEVICE(0x0cad, 0x9011) }, /* Motorola Solutions TETRA PEI */ \ + { USB_DEVICE(0x0cad, 0x9012) } /* MTP6550 */ DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS); /* Novatel Wireless GPS driver */ -- 2.19.0

7 years, 1 month

1
0
0 0

patch "USB: serial: option: improve Quectel EP06 detection" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: option: improve Quectel EP06 detection to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 36cae568404a298a19a6e8a3f18641075d4cab04 Mon Sep 17 00:00:00 2001 From: Kristian Evensen <kristian.evensen(a)gmail.com> Date: Thu, 13 Sep 2018 11:21:49 +0200 Subject: USB: serial: option: improve Quectel EP06 detection The Quectel EP06 (and EM06/EG06) LTE modem supports updating the USB configuration, without the VID/PID or configuration number changing. When the configuration is updated and interfaces are added/removed, the interface numbers are updated. This causes our current code for matching EP06 not to work as intended, as the assumption about reserved interfaces no longer holds. If for example the diagnostic (first) interface is removed, option will (try to) bind to the QMI interface. This patch improves EP06 detection by replacing the current match with two matches, and those matches check class, subclass and protocol as well as VID and PID. The diag interface exports class, subclass and protocol as 0xff. For the other serial interfaces, class is 0xff and subclass and protocol are both 0x0. The modem can export the following devices and always in this order: diag, nmea, at, ppp. qmi and adb. This means that diag can only ever be interface 0, and interface numbers 1-5 should be marked as reserved. The three other serial devices can have interface numbers 0-3, but I have not marked any interfaces as reserved. The reason is that the serial devices are the only interfaces exported by the device where subclass and protocol is 0x0. QMI exports the same class, subclass and protocol values as the diag interface. However, the two interfaces have different number of endpoints, QMI has three and diag two. I have added a check for number of interfaces if VID/PID matches the EP06, and we ignore the device if number of interfaces equals three (and subclass is set). Signed-off-by: Kristian Evensen <kristian.evensen(a)gmail.com> Acked-by: Dan Williams <dcbw(a)redhat.com> [ johan: drop uneeded RSVD(5) for ADB ] Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/option.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 0215b70c4efc..382feafbd127 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1081,8 +1081,9 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06), - .driver_info = RSVD(4) | RSVD(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), + .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), @@ -1985,6 +1986,7 @@ static int option_probe(struct usb_serial *serial, { struct usb_interface_descriptor *iface_desc = &serial->interface->cur_altsetting->desc; + struct usb_device_descriptor *dev_desc = &serial->dev->descriptor; unsigned long device_flags = id->driver_info; /* Never bind to the CD-Rom emulation interface */ @@ -1999,6 +2001,18 @@ static int option_probe(struct usb_serial *serial, if (device_flags & RSVD(iface_desc->bInterfaceNumber)) return -ENODEV; + /* + * Don't bind to the QMI device of the Quectel EP06/EG06/EM06. Class, + * subclass and protocol is 0xff for both the diagnostic port and the + * QMI interface, but the diagnostic port only has two endpoints (QMI + * has three). + */ + if (dev_desc->idVendor == cpu_to_le16(QUECTEL_VENDOR_ID) && + dev_desc->idProduct == cpu_to_le16(QUECTEL_PRODUCT_EP06) && + iface_desc->bInterfaceSubClass && iface_desc->bNumEndpoints == 3) { + return -ENODEV; + } + /* Store the device flags so we can use them during attach. */ usb_set_serial_data(serial, (void *)device_flags); -- 2.19.0

7 years, 1 month

1
0
0 0

patch "USB: serial: option: add two-endpoints device-id flag" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: option: add two-endpoints device-id flag to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 35aecc02b5b621782111f64cbb032c7f6a90bb32 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Thu, 13 Sep 2018 11:21:50 +0200 Subject: USB: serial: option: add two-endpoints device-id flag Allow matching on interfaces having two endpoints by adding a new device-id flag. This allows for the handling of devices whose interface numbers can change (e.g. Quectel EP06) to be contained in the device-id table. Tested-by: Kristian Evensen <kristian.evensen(a)gmail.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/option.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 382feafbd127..e72ad9f81c73 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -561,6 +561,9 @@ static void option_instat_callback(struct urb *urb); /* Interface is reserved */ #define RSVD(ifnum) ((BIT(ifnum) & 0xff) << 0) +/* Interface must have two endpoints */ +#define NUMEP2 BIT(16) + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, @@ -1082,7 +1085,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), - .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) }, + .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, @@ -1986,7 +1989,6 @@ static int option_probe(struct usb_serial *serial, { struct usb_interface_descriptor *iface_desc = &serial->interface->cur_altsetting->desc; - struct usb_device_descriptor *dev_desc = &serial->dev->descriptor; unsigned long device_flags = id->driver_info; /* Never bind to the CD-Rom emulation interface */ @@ -2002,16 +2004,11 @@ static int option_probe(struct usb_serial *serial, return -ENODEV; /* - * Don't bind to the QMI device of the Quectel EP06/EG06/EM06. Class, - * subclass and protocol is 0xff for both the diagnostic port and the - * QMI interface, but the diagnostic port only has two endpoints (QMI - * has three). + * Allow matching on bNumEndpoints for devices whose interface numbers + * can change (e.g. Quectel EP06). */ - if (dev_desc->idVendor == cpu_to_le16(QUECTEL_VENDOR_ID) && - dev_desc->idProduct == cpu_to_le16(QUECTEL_PRODUCT_EP06) && - iface_desc->bInterfaceSubClass && iface_desc->bNumEndpoints == 3) { + if (device_flags & NUMEP2 && iface_desc->bNumEndpoints != 2) return -ENODEV; - } /* Store the device flags so we can use them during attach. */ usb_set_serial_data(serial, (void *)device_flags); -- 2.19.0

7 years, 1 month

1
0
0 0

[PATCH AUTOSEL 4.18 01/65] netfilter: xt_cluster: add dependency on conntrack module

by Sasha Levin

From: Martin Willi <martin(a)strongswan.org> [ Upstream commit c1dc2912059901f97345d9e10c96b841215fdc0f ] The cluster match requires conntrack for matching packets. If the netns does not have conntrack hooks registered, the match does not work at all. Implicitly load the conntrack hook for the family, exactly as many other extensions do. This ensures that the match works even if the hooks have not been registered by other means. Signed-off-by: Martin Willi <martin(a)strongswan.org> Acked-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- net/netfilter/xt_cluster.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/net/netfilter/xt_cluster.c b/net/netfilter/xt_cluster.c index dfbdbb2fc0ed..51d0c257e7a5 100644 --- a/net/netfilter/xt_cluster.c +++ b/net/netfilter/xt_cluster.c @@ -125,6 +125,7 @@ xt_cluster_mt(const struct sk_buff *skb, struct xt_action_param *par) static int xt_cluster_mt_checkentry(const struct xt_mtchk_param *par) { struct xt_cluster_match_info *info = par->matchinfo; + int ret; if (info->total_nodes > XT_CLUSTER_NODES_MAX) { pr_info_ratelimited("you have exceeded the maximum number of cluster nodes (%u > %u)\n", @@ -135,7 +136,17 @@ static int xt_cluster_mt_checkentry(const struct xt_mtchk_param *par) pr_info_ratelimited("node mask cannot exceed total number of nodes\n"); return -EDOM; } - return 0; + + ret = nf_ct_netns_get(par->net, par->family); + if (ret < 0) + pr_info_ratelimited("cannot load conntrack support for proto=%u\n", + par->family); + return ret; +} + +static void xt_cluster_mt_destroy(const struct xt_mtdtor_param *par) +{ + nf_ct_netns_put(par->net, par->family); } static struct xt_match xt_cluster_match __read_mostly = { @@ -144,6 +155,7 @@ static struct xt_match xt_cluster_match __read_mostly = { .match = xt_cluster_mt, .checkentry = xt_cluster_mt_checkentry, .matchsize = sizeof(struct xt_cluster_match_info), + .destroy = xt_cluster_mt_destroy, .me = THIS_MODULE, }; -- 2.17.1

7 years, 1 month

2
66
0 0

[PATCH] firmware: Always initialize the fw_priv list object

by Bjorn Andersson

When freeing the fw_priv the item is taken off the list. This causes an oops in the FW_OPT_NOCACHE case as the list object is not initialized. Make sure to initialize the list object regardless of this flag. Fixes: 422b3db2a503 ("firmware: Fix security issue with request_firmware_into_buf()") Cc: stable(a)vger.kernel.org Cc: Rishabh Bhatnagar <rishabhb(a)codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson(a)linaro.org> --- drivers/base/firmware_loader/main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/base/firmware_loader/main.c b/drivers/base/firmware_loader/main.c index b3c0498ee433..8e9213b36e31 100644 --- a/drivers/base/firmware_loader/main.c +++ b/drivers/base/firmware_loader/main.c @@ -226,8 +226,11 @@ static int alloc_lookup_fw_priv(const char *fw_name, } tmp = __allocate_fw_priv(fw_name, fwc, dbuf, size); - if (tmp && !(opt_flags & FW_OPT_NOCACHE)) - list_add(&tmp->list, &fwc->head); + if (tmp) { + INIT_LIST_HEAD(&tmp->list); + if (!(opt_flags & FW_OPT_NOCACHE)) + list_add(&tmp->list, &fwc->head); + } spin_unlock(&fwc->lock); *fw_priv = tmp; -- 2.18.0

7 years, 1 month

5
8
0 0

[PATCH] kdb: print real address of pointers instead of hashed addresses

by Christophe Leroy

Since commit ad67b74d2469 ("printk: hash addresses printed with %p"), all pointers printed with %p are printed with hashed addresses instead of real addresses in order to avoid leaking addresses in dmesg and syslog. But this applies to kdb too, with is unfortunate: Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry kdb> ps 15 sleeping system daemon (state M) processes suppressed, use 'ps A' to see all. Task Addr Pid Parent [*] cpu State Thread Command 0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh 0x(ptrval) 1 0 0 0 S 0x(ptrval) init 0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp 0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp 0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0 0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H 0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0 0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq 0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt The whole purpose of kdb is to debug, and for debugging real addresses need to be known. In addition, data displayed by kdb doesn't go into dmesg. This patch replaces all %p by %px in kdb in order to display real addresses. Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Cc: <stable(a)vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy(a)c-s.fr> --- kernel/debug/kdb/kdb_main.c | 14 +++++++------- kernel/debug/kdb/kdb_support.c | 12 ++++++------ 2 files changed, 13 insertions(+), 13 deletions(-) diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index 2ddfce8f1e8f..f338d23b112b 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -1192,7 +1192,7 @@ static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs, if (reason == KDB_REASON_DEBUG) { /* special case below */ } else { - kdb_printf("\nEntering kdb (current=0x%p, pid %d) ", + kdb_printf("\nEntering kdb (current=0x%px, pid %d) ", kdb_current, kdb_current ? kdb_current->pid : 0); #if defined(CONFIG_SMP) kdb_printf("on processor %d ", raw_smp_processor_id()); @@ -1208,7 +1208,7 @@ static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs, */ switch (db_result) { case KDB_DB_BPT: - kdb_printf("\nEntering kdb (0x%p, pid %d) ", + kdb_printf("\nEntering kdb (0x%px, pid %d) ", kdb_current, kdb_current->pid); #if defined(CONFIG_SMP) kdb_printf("on processor %d ", raw_smp_processor_id()); @@ -2048,7 +2048,7 @@ static int kdb_lsmod(int argc, const char **argv) if (mod->state == MODULE_STATE_UNFORMED) continue; - kdb_printf("%-20s%8u 0x%p ", mod->name, + kdb_printf("%-20s%8u 0x%px ", mod->name, mod->core_layout.size, (void *)mod); #ifdef CONFIG_MODULE_UNLOAD kdb_printf("%4d ", module_refcount(mod)); @@ -2059,7 +2059,7 @@ static int kdb_lsmod(int argc, const char **argv) kdb_printf(" (Loading)"); else kdb_printf(" (Live)"); - kdb_printf(" 0x%p", mod->core_layout.base); + kdb_printf(" 0x%px", mod->core_layout.base); #ifdef CONFIG_MODULE_UNLOAD { @@ -2341,7 +2341,7 @@ void kdb_ps1(const struct task_struct *p) return; cpu = kdb_process_cpu(p); - kdb_printf("0x%p %8d %8d %d %4d %c 0x%p %c%s\n", + kdb_printf("0x%px %8d %8d %d %4d %c 0x%px %c%s\n", (void *)p, p->pid, p->parent->pid, kdb_task_has_cpu(p), kdb_process_cpu(p), kdb_task_state_char(p), @@ -2354,7 +2354,7 @@ void kdb_ps1(const struct task_struct *p) } else { if (KDB_TSK(cpu) != p) kdb_printf(" Error: does not match running " - "process table (0x%p)\n", KDB_TSK(cpu)); + "process table (0x%px)\n", KDB_TSK(cpu)); } } } @@ -2692,7 +2692,7 @@ int kdb_register_flags(char *cmd, for_each_kdbcmd(kp, i) { if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) { kdb_printf("Duplicate kdb command registered: " - "%s, func %p help %s\n", cmd, func, help); + "%s, func %px help %s\n", cmd, func, help); return 1; } } diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c index 990b3cc526c8..987eb73284d2 100644 --- a/kernel/debug/kdb/kdb_support.c +++ b/kernel/debug/kdb/kdb_support.c @@ -40,7 +40,7 @@ int kdbgetsymval(const char *symname, kdb_symtab_t *symtab) { if (KDB_DEBUG(AR)) - kdb_printf("kdbgetsymval: symname=%s, symtab=%p\n", symname, + kdb_printf("kdbgetsymval: symname=%s, symtab=%px\n", symname, symtab); memset(symtab, 0, sizeof(*symtab)); symtab->sym_start = kallsyms_lookup_name(symname); @@ -88,7 +88,7 @@ int kdbnearsym(unsigned long addr, kdb_symtab_t *symtab) char *knt1 = NULL; if (KDB_DEBUG(AR)) - kdb_printf("kdbnearsym: addr=0x%lx, symtab=%p\n", addr, symtab); + kdb_printf("kdbnearsym: addr=0x%lx, symtab=%px\n", addr, symtab); memset(symtab, 0, sizeof(*symtab)); if (addr < 4096) @@ -149,7 +149,7 @@ int kdbnearsym(unsigned long addr, kdb_symtab_t *symtab) symtab->mod_name = "kernel"; if (KDB_DEBUG(AR)) kdb_printf("kdbnearsym: returns %d symtab->sym_start=0x%lx, " - "symtab->mod_name=%p, symtab->sym_name=%p (%s)\n", ret, + "symtab->mod_name=%px, symtab->sym_name=%px (%s)\n", ret, symtab->sym_start, symtab->mod_name, symtab->sym_name, symtab->sym_name); @@ -887,13 +887,13 @@ void debug_kusage(void) __func__, dah_first); if (dah_first) { h_used = (struct debug_alloc_header *)debug_alloc_pool; - kdb_printf("%s: h_used %p size %d\n", __func__, h_used, + kdb_printf("%s: h_used %px size %d\n", __func__, h_used, h_used->size); } do { h_used = (struct debug_alloc_header *) ((char *)h_free + dah_overhead + h_free->size); - kdb_printf("%s: h_used %p size %d caller %p\n", + kdb_printf("%s: h_used %px size %d caller %px\n", __func__, h_used, h_used->size, h_used->caller); h_free = (struct debug_alloc_header *) (debug_alloc_pool + h_free->next); @@ -902,7 +902,7 @@ void debug_kusage(void) ((char *)h_free + dah_overhead + h_free->size); if ((char *)h_used - debug_alloc_pool != sizeof(debug_alloc_pool_aligned)) - kdb_printf("%s: h_used %p size %d caller %p\n", + kdb_printf("%s: h_used %px size %d caller %px\n", __func__, h_used, h_used->size, h_used->caller); out: spin_unlock(&dap_lock); -- 2.13.3

7 years, 1 month

2
1
0 0

[PATCH 2/2] selftests/x86: Add clock_gettime() tests to test_vdso

by Andy Lutomirski

Now that the vDSO implementation of clock_gettime() is getting reworked, add a selftest for it. This tests that its output is consistent with the syscall version. This is marked for stable to serve as a test for commit "x86/vdso: Fix asm constraints on vDSO syscall fallbacks". Cc: stable(a)vger.kernel.org Signed-off-by: Andy Lutomirski <luto(a)kernel.org> --- tools/testing/selftests/x86/test_vdso.c | 99 +++++++++++++++++++++++++ 1 file changed, 99 insertions(+) diff --git a/tools/testing/selftests/x86/test_vdso.c b/tools/testing/selftests/x86/test_vdso.c index 235259011704..49f7294fb382 100644 --- a/tools/testing/selftests/x86/test_vdso.c +++ b/tools/testing/selftests/x86/test_vdso.c @@ -17,6 +17,7 @@ #include <errno.h> #include <sched.h> #include <stdbool.h> +#include <limits.h> #ifndef SYS_getcpu # ifdef __x86_64__ @@ -31,6 +32,10 @@ int nerrs = 0; +typedef int (*vgettime_t)(clockid_t, struct timespec *); + +vgettime_t vdso_clock_gettime; + typedef long (*getcpu_t)(unsigned *, unsigned *, void *); getcpu_t vgetcpu; @@ -95,6 +100,10 @@ static void fill_function_pointers() printf("Warning: failed to find getcpu in vDSO\n"); vgetcpu = (getcpu_t) vsyscall_getcpu(); + + vdso_clock_gettime = (vgettime_t)dlsym(vdso, "__vdso_clock_gettime"); + if (!vdso_clock_gettime) + printf("Warning: failed to find clock_gettime in vDSO\n"); } static long sys_getcpu(unsigned * cpu, unsigned * node, @@ -103,6 +112,11 @@ static long sys_getcpu(unsigned * cpu, unsigned * node, return syscall(__NR_getcpu, cpu, node, cache); } +static inline int sys_clock_gettime(clockid_t id, struct timespec *ts) +{ + return syscall(__NR_clock_gettime, id, ts); +} + static void test_getcpu(void) { printf("[RUN]\tTesting getcpu...\n"); @@ -155,10 +169,95 @@ static void test_getcpu(void) } } +static bool ts_leq(const struct timespec *a, const struct timespec *b) +{ + if (a->tv_sec != b->tv_sec) + return a->tv_sec < b->tv_sec; + else + return a->tv_nsec <= b->tv_nsec; +} + +static char const * const clocknames[] = { + [0] = "CLOCK_REALTIME", + [1] = "CLOCK_MONOTONIC", + [2] = "CLOCK_PROCESS_CPUTIME_ID", + [3] = "CLOCK_THREAD_CPUTIME_ID", + [4] = "CLOCK_MONOTONIC_RAW", + [5] = "CLOCK_REALTIME_COARSE", + [6] = "CLOCK_MONOTONIC_COARSE", + [7] = "CLOCK_BOOTTIME", + [8] = "CLOCK_REALTIME_ALARM", + [9] = "CLOCK_BOOTTIME_ALARM", + [10] = "CLOCK_SGI_CYCLE", + [11] = "CLOCK_TAI", +}; + +static void test_one_clock_gettime(int clock, const char *name) +{ + struct timespec start, vdso, end; + int vdso_ret, end_ret; + + printf("[RUN]\tTesting clock_gettime for clock %s (%d)...\n", name, clock); + + if (sys_clock_gettime(clock, &start) < 0) { + if (errno == EINVAL) { + vdso_ret = vdso_clock_gettime(clock, &vdso); + if (vdso_ret == -EINVAL) { + printf("[OK]\tNo such clock.\n"); + } else { + printf("[FAIL]\tNo such clock, but __vdso_clock_gettime returned %d\n", vdso_ret); + nerrs++; + } + } else { + printf("[WARN]\t clock_gettime(%d) syscall returned error %d\n", clock, errno); + } + return; + } + + vdso_ret = vdso_clock_gettime(clock, &vdso); + end_ret = sys_clock_gettime(clock, &end); + + if (vdso_ret != 0 || end_ret != 0) { + printf("[FAIL]\tvDSO returned %d, syscall errno=%d\n", + vdso_ret, errno); + nerrs++; + return; + } + + printf("\t%llu.%09ld %llu.%09ld %llu.%09ld\n", + (unsigned long long)start.tv_sec, start.tv_nsec, + (unsigned long long)vdso.tv_sec, vdso.tv_nsec, + (unsigned long long)end.tv_sec, end.tv_nsec); + + if (!ts_leq(&start, &vdso) || !ts_leq(&vdso, &end)) { + printf("[FAIL]\tTimes are out of sequence\n"); + nerrs++; + } +} + +static void test_clock_gettime(void) +{ + for (int clock = 0; clock < sizeof(clocknames) / sizeof(clocknames[0]); + clock++) { + test_one_clock_gettime(clock, clocknames[clock]); + } + + /* Also test some invalid clock ids */ + test_one_clock_gettime(-1, "invalid"); + test_one_clock_gettime(INT_MIN, "invalid"); + test_one_clock_gettime(INT_MAX, "invalid"); +} + int main(int argc, char **argv) { fill_function_pointers(); + test_clock_gettime(); + + /* + * Test getcpu() last so that, if something goes wrong setting affinity, + * we still run the other tests. + */ test_getcpu(); return nerrs ? 1 : 0; -- 2.17.1

7 years, 1 month

1
0
0 0

[PATCH 1/2] x86/vdso: Fix asm constraints on vDSO syscall fallbacks

by Andy Lutomirski

The syscall fallbacks in the vDSO have incorrect asm constraints. They are not marked as writing to their outputs -- instead, they are marked as clobbering "memory", which is useless. In particular, gcc is smart enough to know that the timespec parameter hasn't escaped, so a memory clobber doesn't clobber it. And passing a pointer as an asm *input* does not tell gcc that the pointed-to value is changed. Add in the fact that the asm instructions weren't volatile, and gcc was free to omit them entirely unless their sole output (the return value) is used. Which it is (phew!), but that stops happening with some upcoming patches. As a trivial example, the following code: void test_fallback(struct timespec *ts) { vdso_fallback_gettime(CLOCK_MONOTONIC, ts); } compiles to: 00000000000000c0 <test_fallback>: c0: c3 retq To add insult to injury, the RCX and R11 clobbers on 64-bit builds were missing. The "memory" clobber is also unnecessary -- no ordering with respect to other memory operations is needed, but I'll fix that in a separate not-for-stable patch. Cc: stable(a)vger.kernel.org Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Signed-off-by: Andy Lutomirski <luto(a)kernel.org> --- arch/x86/entry/vdso/vclock_gettime.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/arch/x86/entry/vdso/vclock_gettime.c b/arch/x86/entry/vdso/vclock_gettime.c index f19856d95c60..134e2d2e8add 100644 --- a/arch/x86/entry/vdso/vclock_gettime.c +++ b/arch/x86/entry/vdso/vclock_gettime.c @@ -43,8 +43,9 @@ extern u8 hvclock_page notrace static long vdso_fallback_gettime(long clock, struct timespec *ts) { long ret; - asm("syscall" : "=a" (ret) : - "0" (__NR_clock_gettime), "D" (clock), "S" (ts) : "memory"); + asm ("syscall" : "=a" (ret), "=m" (*ts) : + "0" (__NR_clock_gettime), "D" (clock), "S" (ts) : + "memory", "rcx", "r11"); return ret; } @@ -52,8 +53,9 @@ notrace static long vdso_fallback_gtod(struct timeval *tv, struct timezone *tz) { long ret; - asm("syscall" : "=a" (ret) : - "0" (__NR_gettimeofday), "D" (tv), "S" (tz) : "memory"); + asm ("syscall" : "=a" (ret), "=m" (*tv), "=m" (*tz) : + "0" (__NR_gettimeofday), "D" (tv), "S" (tz) : + "memory", "rcx", "r11"); return ret; } @@ -64,12 +66,12 @@ notrace static long vdso_fallback_gettime(long clock, struct timespec *ts) { long ret; - asm( + asm ( "mov %%ebx, %%edx \n" "mov %2, %%ebx \n" "call __kernel_vsyscall \n" "mov %%edx, %%ebx \n" - : "=a" (ret) + : "=a" (ret), "=m" (*ts) : "0" (__NR_clock_gettime), "g" (clock), "c" (ts) : "memory", "edx"); return ret; @@ -79,12 +81,12 @@ notrace static long vdso_fallback_gtod(struct timeval *tv, struct timezone *tz) { long ret; - asm( + asm ( "mov %%ebx, %%edx \n" "mov %2, %%ebx \n" "call __kernel_vsyscall \n" "mov %%edx, %%ebx \n" - : "=a" (ret) + : "=a" (ret), "=m" (*tv), "=m" (*tz) : "0" (__NR_gettimeofday), "g" (tv), "c" (tz) : "memory", "edx"); return ret; -- 2.17.1

7 years, 1 month

1
0
0 0

[PATCH v4.14.y] serial: imx: restore handshaking irq for imx1

by Uwe Kleine-König

commit 7e620984b62532783912312e334f3c48cdacbd5d upstream. Back in 2015 when irda was dropped from the driver imx1 was broken. This change reintroduces the support for the third interrupt of the UART. Fixes: afe9cbb1a6ad ("serial: imx: drop support for IRDA") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> Reviewed-by: Leonard Crestez <leonard.crestez(a)nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> [ukl: s/imx_uart_rtsint/imx_rtsint/ as 4.14.y misses 9d1a50a2cceb] Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> --- Hello, this is a backport of 7e620984b62532783912312e334f3c48cdacbd5d to v4.14.y that misses 9d1a50a2cceb (serial: imx: consistently use imx_uart_ as prefix for all functions) which changed many function names. So the old function name has to be used. Best regards Uwe drivers/tty/serial/imx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 8deaf2ad8b34..7b01e6b06022 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2213,6 +2213,14 @@ static int serial_imx_probe(struct platform_device *pdev) ret); return ret; } + + ret = devm_request_irq(&pdev->dev, rtsirq, imx_uart_rtsint, 0, + dev_name(&pdev->dev), sport); + if (ret) { + dev_err(&pdev->dev, "failed to request rts irq: %d\n", + ret); + return ret; + } } else { ret = devm_request_irq(&pdev->dev, rxirq, imx_int, 0, dev_name(&pdev->dev), sport); -- 2.19.0

7 years, 1 month

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror