- Linux-stable-mirror - lists.linaro.org

FAILED: patch "[PATCH] MIPS: Schedule on CPUs we need to lose FPU for a mode switch" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 8c8d953c28000045e5e823f3398319f04d49a7f1 Mon Sep 17 00:00:00 2001 From: Paul Burton <paul.burton(a)mips.com> Date: Tue, 19 Dec 2017 15:11:08 -0800 Subject: [PATCH] MIPS: Schedule on CPUs we need to lose FPU for a mode switch Commit 6b8322576e9d ("MIPS: Force CPUs to lose FP context during mode switches") ensures that we react to PR_SET_FP_MODE prctl syscalls quickly by broadcasting an IPI in order to cause CPUs to lose FPU access when necessary. Whilst it achieves that, unfortunately it causes all sorts of strange race conditions because: 1) The IPI may arrive at a point where the FPU is in the process of being enabled, but that process is not yet complete leading to a state we aren't prepared to handle. For example: [ 370.215903] do_cpu invoked from kernel context![#1]: [ 370.221064] CPU: 0 PID: 963 Comm: fp-prctl Not tainted 4.9.0-rc5-00323-g210db32-dirty #226 [ 370.229420] task: a8000000fd672e00 task.stack: a8000000fd630000 [ 370.235399] $ 0 : 0000000000000000 0000000000000001 0000000000000001 a8000000fd630000 [ 370.243882] $ 4 : a8000000fd672e00 0000000000000000 0000000000000453 0000000000000000 [ 370.252317] $ 8 : 0000000000000000 a8000000fd637c28 1000000000000000 0000000000000010 [ 370.260753] $12 : 00000000140084e0 ffffffff80109c00 0000000000000000 0000000000000002 [ 370.269179] $16 : ffffffff8092f080 a8000000fd672e00 ffffffff80107fe8 a8000000fd485000 [ 370.277612] $20 : ffffffff8084d328 ffffffff80940000 0000000000000009 ffffffff80930000 [ 370.286038] $24 : 0000000000000000 900000001612048c [ 370.294476] $28 : a8000000fd630000 a8000000fd637ac0 ffffffff80937300 ffffffff8010807c [ 370.302909] Hi : 0000000000000000 [ 370.306595] Lo : 0000000000000200 [ 370.310376] epc : ffffffff80115d38 _save_fp+0x10/0xa0 [ 370.315784] ra : ffffffff8010807c prepare_for_fp_mode_switch+0x94/0x1b0 [ 370.322707] Status: 140084e2 KX SX UX KERNEL EXL [ 370.327980] Cause : 1080002c (ExcCode 0b) [ 370.332091] PrId : 0001a428 (MIPS P6600) [ 370.336179] Modules linked in: [ 370.339486] Process fp-prctl (pid: 963, threadinfo=a8000000fd630000, task=a8000000fd672e00, tls=00000000756e67d0) [ 370.349724] Stack : 0000000000000000 a8000000fd557dc0 0000000000000000 ffffffff801ca8e0 [ 370.358161] 0000000000000000 a8000000fd637b9c 0000000000000009 ffffffff80923780 [ 370.366575] ffffffff80850000 ffffffff8011610c 00000000000000b8 ffffffff801a5084 [ 370.374989] ffffffff8084a370 ffffffff8084a388 ffffffff80923780 ffffffff80923828 [ 370.383395] 0000000000010000 ffffffff809237a8 0000000000020000 ffffffff80a40000 [ 370.391817] 000000000000007c 00000000004a0000 00000000756dedd0 ffffffff801a5188 [ 370.400230] a800000002014900 0000000000000001 ffffffff80923780 0000000080923828 [ 370.408644] ffffffff80923780 ffffffff80923780 ffffffff80923828 ffffffff801a521c [ 370.417066] ffffffff80923780 ffffffff80923828 0000000000010000 ffffffff801a8f84 [ 370.425472] ffffffff80a40000 a8000000fd637c20 ffffffff80a39240 0000000000000001 [ 370.433885] ... [ 370.436562] Call Trace: [ 370.439222] [<ffffffff80115d38>] _save_fp+0x10/0xa0 [ 370.444305] [<ffffffff8010807c>] prepare_for_fp_mode_switch+0x94/0x1b0 [ 370.451035] [<ffffffff801ca8e0>] flush_smp_call_function_queue+0xf8/0x230 [ 370.457991] [<ffffffff8011610c>] ipi_call_interrupt+0xc/0x20 [ 370.463814] [<ffffffff801a5084>] __handle_irq_event_percpu+0xc4/0x1a8 [ 370.470404] [<ffffffff801a5188>] handle_irq_event_percpu+0x20/0x68 [ 370.476734] [<ffffffff801a521c>] handle_irq_event+0x4c/0x88 [ 370.482486] [<ffffffff801a8f84>] handle_edge_irq+0x12c/0x210 [ 370.488316] [<ffffffff801a47a0>] generic_handle_irq+0x38/0x48 [ 370.494280] [<ffffffff804a2dbc>] gic_handle_shared_int+0x194/0x268 [ 370.500616] [<ffffffff801a47a0>] generic_handle_irq+0x38/0x48 [ 370.506529] [<ffffffff80107e60>] do_IRQ+0x18/0x28 [ 370.511445] [<ffffffff804a1524>] plat_irq_dispatch+0xc4/0x140 [ 370.517339] [<ffffffff80106230>] ret_from_irq+0x0/0x4 [ 370.522583] [<ffffffff8010fad4>] do_ri+0x4fc/0x7e8 [ 370.527546] [<ffffffff80106220>] ret_from_exception+0x0/0x10 2) The IPI may arrive during kernel use of the FPU, since we generally only disable preemption around use of the FPU & leave interrupts enabled. This can lead to us unexpectedly losing access to the FPU in places where it previously had not been possible. For example: do_cpu invoked from kernel context![#2]: CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82 #2 task: 838e4000 ti: 88d38000 task.ti: 88d38000 $ 0 : 00000000 00000001 ffffffff 88d3fef8 $ 4 : 838e4000 88d38004 00000000 00000001 $ 8 : 3400fc01 801f8020 808e9100 24000000 $12 : dbffffff 807b69d8 807b0000 00000000 $16 : 00000000 80786150 00400fc4 809c0398 $20 : 809c0338 0040273c 88d3ff28 808e9d30 $24 : 808e9d30 00400fb4 $28 : 88d38000 88d3fe88 00000000 8011a2ac Hi : 0040273c Lo : 88d3ff28 epc : 80114178 _restore_fp+0x10/0xa0 ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660 Status: 1400fc03 KERNEL EXL IE Cause : 1080002c (ExcCode 0b) PrId : 0001a920 (MIPS I6400) Modules linked in: Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0) Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338 808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000 004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28 808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000 00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20 ... Call Trace: [<80114178>] _restore_fp+0x10/0xa0 [<8011a2ac>] mipsr2_decoder+0xd5c/0x1660 [<8010de18>] do_ri+0x90/0x6b8 [<80105c20>] ret_from_exception+0x0/0x10 At first glance a simple fix may seem to be to disable interrupts around kernel use of the FPU rather than merely preemption, however this would introduce further overhead outside of the mode switch path & doesn't solve the third problem: 3) The IPI may arrive whilst the kernel is running code that will lead to a preempt_disable() call & FPU usage soon. If this happens then the IPI will be serviced & we'll proceed to enable an FPU whilst the mode switch is in progress, leading to strange & inconsistent behaviour. Further to all of this is a separate but related problem: 4) There are various paths through which we may enable the FPU without the user having triggered a coprocessor 1 disabled exception. These paths are those in which we emulate instructions & then enable the FPU with the expectation that the user might execute an FP instruction shortly afterwards. However these paths have not previously checked whether an FP mode switch is underway for the task, and therefore could enable the FPU whilst such a mode switch is in progress leading to strange & inconsistent behaviour for user code. This patch fixes all of the above by taking a step back & re-examining our approach to FP mode switches. Up until now we have taken these basic steps: a) Prevent any threads that are part of the affected process from being able to obtain ownership of the FPU. b) Cause any threads that are part of the affected process and already have ownership of an FPU to lose it. c) Set the thread flags for each thread that is part of the affected process to reflect the new FP mode. d) Allow threads to obtain ownership of the FPU again. This approach is however more complex than necessary. All that we really require is that the mode switch has occurred for all threads that are part of the affected process before mips_set_process_fp_mode(), and thus the PR_SET_FP_MODE prctl() syscall, returns. This doesn't require that we stop threads from owning or using an FPU whilst a mode switch occurs, only that we force them to relinquish it after the mode switch has occurred such that they next own an FPU with the correct mode configured. Our basic steps therefore simplify to: A) Set the thread flags for each thread that is part of the affected process to reflect the new FP mode. B) Cause any threads that are part of the affected process and already have ownership of an FPU to lose it. We implement B) by forcing each CPU which might be running a thread which is part of the affected process to schedule a no-op function, which causes the affected thread to lose its FPU ownership when it is descheduled. The end result is simpler FP mode switching with less overhead in the FPU enable path (ie. enable_restore_fp_context()) and fewer moving parts. Signed-off-by: Paul Burton <paul.burton(a)mips.com> Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS") Fixes: 6b8322576e9d ("MIPS: Force CPUs to lose FP context during mode switches") Cc: James Hogan <jhogan(a)kernel.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: linux-mips(a)linux-mips.org Cc: stable <stable(a)vger.kernel.org> # v4.0+ diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index da2004cef2d5..b509371a6b0c 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -126,8 +126,6 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) for_each_possible_cpu(i) cpu_context(i, mm) = 0; - atomic_set(&mm->context.fp_mode_switching, 0); - mm->context.bd_emupage_allocmap = NULL; spin_lock_init(&mm->context.bd_emupage_lock); init_waitqueue_head(&mm->context.bd_emupage_queue); diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 8d85046adcc8..fe6001d748cf 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -29,6 +29,7 @@ #include <linux/kallsyms.h> #include <linux/random.h> #include <linux/prctl.h> +#include <linux/cpu.h> #include <asm/asm.h> #include <asm/bootinfo.h> @@ -691,19 +692,25 @@ int mips_get_process_fp_mode(struct task_struct *task) return value; } -static void prepare_for_fp_mode_switch(void *info) +static long prepare_for_fp_mode_switch(void *unused) { - struct mm_struct *mm = info; - - if (current->mm == mm) - lose_fpu(1); + /* + * This is icky, but we use this to simply ensure that all CPUs have + * context switched, regardless of whether they were previously running + * kernel or user code. This ensures that no CPU currently has its FPU + * enabled, or is about to attempt to enable it through any path other + * than enable_restore_fp_context() which will wait appropriately for + * fp_mode_switching to be zero. + */ + return 0; } int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) { const unsigned int known_bits = PR_FP_MODE_FR | PR_FP_MODE_FRE; struct task_struct *t; - int max_users; + struct cpumask process_cpus; + int cpu; /* If nothing to change, return right away, successfully. */ if (value == mips_get_process_fp_mode(task)) @@ -736,35 +743,7 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) if (!(value & PR_FP_MODE_FR) && raw_cpu_has_fpu && cpu_has_mips_r6) return -EOPNOTSUPP; - /* Proceed with the mode switch */ - preempt_disable(); - - /* Save FP & vector context, then disable FPU & MSA */ - if (task->signal == current->signal) - lose_fpu(1); - - /* Prevent any threads from obtaining live FP context */ - atomic_set(&task->mm->context.fp_mode_switching, 1); - smp_mb__after_atomic(); - - /* - * If there are multiple online CPUs then force any which are running - * threads in this process to lose their FPU context, which they can't - * regain until fp_mode_switching is cleared later. - */ - if (num_online_cpus() > 1) { - /* No need to send an IPI for the local CPU */ - max_users = (task->mm == current->mm) ? 1 : 0; - - if (atomic_read(&current->mm->mm_users) > max_users) - smp_call_function(prepare_for_fp_mode_switch, - (void *)current->mm, 1); - } - - /* - * There are now no threads of the process with live FP context, so it - * is safe to proceed with the FP mode switch. - */ + /* Indicate the new FP mode in each thread */ for_each_thread(task, t) { /* Update desired FP register width */ if (value & PR_FP_MODE_FR) { @@ -781,9 +760,34 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) clear_tsk_thread_flag(t, TIF_HYBRID_FPREGS); } - /* Allow threads to use FP again */ - atomic_set(&task->mm->context.fp_mode_switching, 0); - preempt_enable(); + /* + * We need to ensure that all threads in the process have switched mode + * before returning, in order to allow userland to not worry about + * races. We can do this by forcing all CPUs that any thread in the + * process may be running on to schedule something else - in this case + * prepare_for_fp_mode_switch(). + * + * We begin by generating a mask of all CPUs that any thread in the + * process may be running on. + */ + cpumask_clear(&process_cpus); + for_each_thread(task, t) + cpumask_set_cpu(task_cpu(t), &process_cpus); + + /* + * Now we schedule prepare_for_fp_mode_switch() on each of those CPUs. + * + * The CPUs may have rescheduled already since we switched mode or + * generated the cpumask, but that doesn't matter. If the task in this + * process is scheduled out then our scheduling + * prepare_for_fp_mode_switch() will simply be redundant. If it's + * scheduled in then it will already have picked up the new FP mode + * whilst doing so. + */ + get_online_cpus(); + for_each_cpu_and(cpu, &process_cpus, cpu_online_mask) + work_on_cpu(cpu, prepare_for_fp_mode_switch, NULL); + put_online_cpus(); wake_up_var(&task->mm->context.fp_mode_switching); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index d67fa74622ee..4d9ca9b465ae 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1220,13 +1220,6 @@ static int enable_restore_fp_context(int msa) { int err, was_fpu_owner, prior_msa; - /* - * If an FP mode switch is currently underway, wait for it to - * complete before proceeding. - */ - wait_var_event(&current->mm->context.fp_mode_switching, - !atomic_read(&current->mm->context.fp_mode_switching)); - if (!used_math()) { /* First time FP context user. */ preempt_disable();

7 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] MIPS: Schedule on CPUs we need to lose FPU for a mode switch" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 8c8d953c28000045e5e823f3398319f04d49a7f1 Mon Sep 17 00:00:00 2001 From: Paul Burton <paul.burton(a)mips.com> Date: Tue, 19 Dec 2017 15:11:08 -0800 Subject: [PATCH] MIPS: Schedule on CPUs we need to lose FPU for a mode switch Commit 6b8322576e9d ("MIPS: Force CPUs to lose FP context during mode switches") ensures that we react to PR_SET_FP_MODE prctl syscalls quickly by broadcasting an IPI in order to cause CPUs to lose FPU access when necessary. Whilst it achieves that, unfortunately it causes all sorts of strange race conditions because: 1) The IPI may arrive at a point where the FPU is in the process of being enabled, but that process is not yet complete leading to a state we aren't prepared to handle. For example: [ 370.215903] do_cpu invoked from kernel context![#1]: [ 370.221064] CPU: 0 PID: 963 Comm: fp-prctl Not tainted 4.9.0-rc5-00323-g210db32-dirty #226 [ 370.229420] task: a8000000fd672e00 task.stack: a8000000fd630000 [ 370.235399] $ 0 : 0000000000000000 0000000000000001 0000000000000001 a8000000fd630000 [ 370.243882] $ 4 : a8000000fd672e00 0000000000000000 0000000000000453 0000000000000000 [ 370.252317] $ 8 : 0000000000000000 a8000000fd637c28 1000000000000000 0000000000000010 [ 370.260753] $12 : 00000000140084e0 ffffffff80109c00 0000000000000000 0000000000000002 [ 370.269179] $16 : ffffffff8092f080 a8000000fd672e00 ffffffff80107fe8 a8000000fd485000 [ 370.277612] $20 : ffffffff8084d328 ffffffff80940000 0000000000000009 ffffffff80930000 [ 370.286038] $24 : 0000000000000000 900000001612048c [ 370.294476] $28 : a8000000fd630000 a8000000fd637ac0 ffffffff80937300 ffffffff8010807c [ 370.302909] Hi : 0000000000000000 [ 370.306595] Lo : 0000000000000200 [ 370.310376] epc : ffffffff80115d38 _save_fp+0x10/0xa0 [ 370.315784] ra : ffffffff8010807c prepare_for_fp_mode_switch+0x94/0x1b0 [ 370.322707] Status: 140084e2 KX SX UX KERNEL EXL [ 370.327980] Cause : 1080002c (ExcCode 0b) [ 370.332091] PrId : 0001a428 (MIPS P6600) [ 370.336179] Modules linked in: [ 370.339486] Process fp-prctl (pid: 963, threadinfo=a8000000fd630000, task=a8000000fd672e00, tls=00000000756e67d0) [ 370.349724] Stack : 0000000000000000 a8000000fd557dc0 0000000000000000 ffffffff801ca8e0 [ 370.358161] 0000000000000000 a8000000fd637b9c 0000000000000009 ffffffff80923780 [ 370.366575] ffffffff80850000 ffffffff8011610c 00000000000000b8 ffffffff801a5084 [ 370.374989] ffffffff8084a370 ffffffff8084a388 ffffffff80923780 ffffffff80923828 [ 370.383395] 0000000000010000 ffffffff809237a8 0000000000020000 ffffffff80a40000 [ 370.391817] 000000000000007c 00000000004a0000 00000000756dedd0 ffffffff801a5188 [ 370.400230] a800000002014900 0000000000000001 ffffffff80923780 0000000080923828 [ 370.408644] ffffffff80923780 ffffffff80923780 ffffffff80923828 ffffffff801a521c [ 370.417066] ffffffff80923780 ffffffff80923828 0000000000010000 ffffffff801a8f84 [ 370.425472] ffffffff80a40000 a8000000fd637c20 ffffffff80a39240 0000000000000001 [ 370.433885] ... [ 370.436562] Call Trace: [ 370.439222] [<ffffffff80115d38>] _save_fp+0x10/0xa0 [ 370.444305] [<ffffffff8010807c>] prepare_for_fp_mode_switch+0x94/0x1b0 [ 370.451035] [<ffffffff801ca8e0>] flush_smp_call_function_queue+0xf8/0x230 [ 370.457991] [<ffffffff8011610c>] ipi_call_interrupt+0xc/0x20 [ 370.463814] [<ffffffff801a5084>] __handle_irq_event_percpu+0xc4/0x1a8 [ 370.470404] [<ffffffff801a5188>] handle_irq_event_percpu+0x20/0x68 [ 370.476734] [<ffffffff801a521c>] handle_irq_event+0x4c/0x88 [ 370.482486] [<ffffffff801a8f84>] handle_edge_irq+0x12c/0x210 [ 370.488316] [<ffffffff801a47a0>] generic_handle_irq+0x38/0x48 [ 370.494280] [<ffffffff804a2dbc>] gic_handle_shared_int+0x194/0x268 [ 370.500616] [<ffffffff801a47a0>] generic_handle_irq+0x38/0x48 [ 370.506529] [<ffffffff80107e60>] do_IRQ+0x18/0x28 [ 370.511445] [<ffffffff804a1524>] plat_irq_dispatch+0xc4/0x140 [ 370.517339] [<ffffffff80106230>] ret_from_irq+0x0/0x4 [ 370.522583] [<ffffffff8010fad4>] do_ri+0x4fc/0x7e8 [ 370.527546] [<ffffffff80106220>] ret_from_exception+0x0/0x10 2) The IPI may arrive during kernel use of the FPU, since we generally only disable preemption around use of the FPU & leave interrupts enabled. This can lead to us unexpectedly losing access to the FPU in places where it previously had not been possible. For example: do_cpu invoked from kernel context![#2]: CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82 #2 task: 838e4000 ti: 88d38000 task.ti: 88d38000 $ 0 : 00000000 00000001 ffffffff 88d3fef8 $ 4 : 838e4000 88d38004 00000000 00000001 $ 8 : 3400fc01 801f8020 808e9100 24000000 $12 : dbffffff 807b69d8 807b0000 00000000 $16 : 00000000 80786150 00400fc4 809c0398 $20 : 809c0338 0040273c 88d3ff28 808e9d30 $24 : 808e9d30 00400fb4 $28 : 88d38000 88d3fe88 00000000 8011a2ac Hi : 0040273c Lo : 88d3ff28 epc : 80114178 _restore_fp+0x10/0xa0 ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660 Status: 1400fc03 KERNEL EXL IE Cause : 1080002c (ExcCode 0b) PrId : 0001a920 (MIPS I6400) Modules linked in: Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0) Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338 808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000 004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28 808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000 00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20 ... Call Trace: [<80114178>] _restore_fp+0x10/0xa0 [<8011a2ac>] mipsr2_decoder+0xd5c/0x1660 [<8010de18>] do_ri+0x90/0x6b8 [<80105c20>] ret_from_exception+0x0/0x10 At first glance a simple fix may seem to be to disable interrupts around kernel use of the FPU rather than merely preemption, however this would introduce further overhead outside of the mode switch path & doesn't solve the third problem: 3) The IPI may arrive whilst the kernel is running code that will lead to a preempt_disable() call & FPU usage soon. If this happens then the IPI will be serviced & we'll proceed to enable an FPU whilst the mode switch is in progress, leading to strange & inconsistent behaviour. Further to all of this is a separate but related problem: 4) There are various paths through which we may enable the FPU without the user having triggered a coprocessor 1 disabled exception. These paths are those in which we emulate instructions & then enable the FPU with the expectation that the user might execute an FP instruction shortly afterwards. However these paths have not previously checked whether an FP mode switch is underway for the task, and therefore could enable the FPU whilst such a mode switch is in progress leading to strange & inconsistent behaviour for user code. This patch fixes all of the above by taking a step back & re-examining our approach to FP mode switches. Up until now we have taken these basic steps: a) Prevent any threads that are part of the affected process from being able to obtain ownership of the FPU. b) Cause any threads that are part of the affected process and already have ownership of an FPU to lose it. c) Set the thread flags for each thread that is part of the affected process to reflect the new FP mode. d) Allow threads to obtain ownership of the FPU again. This approach is however more complex than necessary. All that we really require is that the mode switch has occurred for all threads that are part of the affected process before mips_set_process_fp_mode(), and thus the PR_SET_FP_MODE prctl() syscall, returns. This doesn't require that we stop threads from owning or using an FPU whilst a mode switch occurs, only that we force them to relinquish it after the mode switch has occurred such that they next own an FPU with the correct mode configured. Our basic steps therefore simplify to: A) Set the thread flags for each thread that is part of the affected process to reflect the new FP mode. B) Cause any threads that are part of the affected process and already have ownership of an FPU to lose it. We implement B) by forcing each CPU which might be running a thread which is part of the affected process to schedule a no-op function, which causes the affected thread to lose its FPU ownership when it is descheduled. The end result is simpler FP mode switching with less overhead in the FPU enable path (ie. enable_restore_fp_context()) and fewer moving parts. Signed-off-by: Paul Burton <paul.burton(a)mips.com> Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS") Fixes: 6b8322576e9d ("MIPS: Force CPUs to lose FP context during mode switches") Cc: James Hogan <jhogan(a)kernel.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: linux-mips(a)linux-mips.org Cc: stable <stable(a)vger.kernel.org> # v4.0+ diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index da2004cef2d5..b509371a6b0c 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -126,8 +126,6 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) for_each_possible_cpu(i) cpu_context(i, mm) = 0; - atomic_set(&mm->context.fp_mode_switching, 0); - mm->context.bd_emupage_allocmap = NULL; spin_lock_init(&mm->context.bd_emupage_lock); init_waitqueue_head(&mm->context.bd_emupage_queue); diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 8d85046adcc8..fe6001d748cf 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -29,6 +29,7 @@ #include <linux/kallsyms.h> #include <linux/random.h> #include <linux/prctl.h> +#include <linux/cpu.h> #include <asm/asm.h> #include <asm/bootinfo.h> @@ -691,19 +692,25 @@ int mips_get_process_fp_mode(struct task_struct *task) return value; } -static void prepare_for_fp_mode_switch(void *info) +static long prepare_for_fp_mode_switch(void *unused) { - struct mm_struct *mm = info; - - if (current->mm == mm) - lose_fpu(1); + /* + * This is icky, but we use this to simply ensure that all CPUs have + * context switched, regardless of whether they were previously running + * kernel or user code. This ensures that no CPU currently has its FPU + * enabled, or is about to attempt to enable it through any path other + * than enable_restore_fp_context() which will wait appropriately for + * fp_mode_switching to be zero. + */ + return 0; } int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) { const unsigned int known_bits = PR_FP_MODE_FR | PR_FP_MODE_FRE; struct task_struct *t; - int max_users; + struct cpumask process_cpus; + int cpu; /* If nothing to change, return right away, successfully. */ if (value == mips_get_process_fp_mode(task)) @@ -736,35 +743,7 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) if (!(value & PR_FP_MODE_FR) && raw_cpu_has_fpu && cpu_has_mips_r6) return -EOPNOTSUPP; - /* Proceed with the mode switch */ - preempt_disable(); - - /* Save FP & vector context, then disable FPU & MSA */ - if (task->signal == current->signal) - lose_fpu(1); - - /* Prevent any threads from obtaining live FP context */ - atomic_set(&task->mm->context.fp_mode_switching, 1); - smp_mb__after_atomic(); - - /* - * If there are multiple online CPUs then force any which are running - * threads in this process to lose their FPU context, which they can't - * regain until fp_mode_switching is cleared later. - */ - if (num_online_cpus() > 1) { - /* No need to send an IPI for the local CPU */ - max_users = (task->mm == current->mm) ? 1 : 0; - - if (atomic_read(&current->mm->mm_users) > max_users) - smp_call_function(prepare_for_fp_mode_switch, - (void *)current->mm, 1); - } - - /* - * There are now no threads of the process with live FP context, so it - * is safe to proceed with the FP mode switch. - */ + /* Indicate the new FP mode in each thread */ for_each_thread(task, t) { /* Update desired FP register width */ if (value & PR_FP_MODE_FR) { @@ -781,9 +760,34 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) clear_tsk_thread_flag(t, TIF_HYBRID_FPREGS); } - /* Allow threads to use FP again */ - atomic_set(&task->mm->context.fp_mode_switching, 0); - preempt_enable(); + /* + * We need to ensure that all threads in the process have switched mode + * before returning, in order to allow userland to not worry about + * races. We can do this by forcing all CPUs that any thread in the + * process may be running on to schedule something else - in this case + * prepare_for_fp_mode_switch(). + * + * We begin by generating a mask of all CPUs that any thread in the + * process may be running on. + */ + cpumask_clear(&process_cpus); + for_each_thread(task, t) + cpumask_set_cpu(task_cpu(t), &process_cpus); + + /* + * Now we schedule prepare_for_fp_mode_switch() on each of those CPUs. + * + * The CPUs may have rescheduled already since we switched mode or + * generated the cpumask, but that doesn't matter. If the task in this + * process is scheduled out then our scheduling + * prepare_for_fp_mode_switch() will simply be redundant. If it's + * scheduled in then it will already have picked up the new FP mode + * whilst doing so. + */ + get_online_cpus(); + for_each_cpu_and(cpu, &process_cpus, cpu_online_mask) + work_on_cpu(cpu, prepare_for_fp_mode_switch, NULL); + put_online_cpus(); wake_up_var(&task->mm->context.fp_mode_switching); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index d67fa74622ee..4d9ca9b465ae 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1220,13 +1220,6 @@ static int enable_restore_fp_context(int msa) { int err, was_fpu_owner, prior_msa; - /* - * If an FP mode switch is currently underway, wait for it to - * complete before proceeding. - */ - wait_var_event(&current->mm->context.fp_mode_switching, - !atomic_read(&current->mm->context.fp_mode_switching)); - if (!used_math()) { /* First time FP context user. */ preempt_disable();

7 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] MIPS: Schedule on CPUs we need to lose FPU for a mode switch" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 8c8d953c28000045e5e823f3398319f04d49a7f1 Mon Sep 17 00:00:00 2001 From: Paul Burton <paul.burton(a)mips.com> Date: Tue, 19 Dec 2017 15:11:08 -0800 Subject: [PATCH] MIPS: Schedule on CPUs we need to lose FPU for a mode switch Commit 6b8322576e9d ("MIPS: Force CPUs to lose FP context during mode switches") ensures that we react to PR_SET_FP_MODE prctl syscalls quickly by broadcasting an IPI in order to cause CPUs to lose FPU access when necessary. Whilst it achieves that, unfortunately it causes all sorts of strange race conditions because: 1) The IPI may arrive at a point where the FPU is in the process of being enabled, but that process is not yet complete leading to a state we aren't prepared to handle. For example: [ 370.215903] do_cpu invoked from kernel context![#1]: [ 370.221064] CPU: 0 PID: 963 Comm: fp-prctl Not tainted 4.9.0-rc5-00323-g210db32-dirty #226 [ 370.229420] task: a8000000fd672e00 task.stack: a8000000fd630000 [ 370.235399] $ 0 : 0000000000000000 0000000000000001 0000000000000001 a8000000fd630000 [ 370.243882] $ 4 : a8000000fd672e00 0000000000000000 0000000000000453 0000000000000000 [ 370.252317] $ 8 : 0000000000000000 a8000000fd637c28 1000000000000000 0000000000000010 [ 370.260753] $12 : 00000000140084e0 ffffffff80109c00 0000000000000000 0000000000000002 [ 370.269179] $16 : ffffffff8092f080 a8000000fd672e00 ffffffff80107fe8 a8000000fd485000 [ 370.277612] $20 : ffffffff8084d328 ffffffff80940000 0000000000000009 ffffffff80930000 [ 370.286038] $24 : 0000000000000000 900000001612048c [ 370.294476] $28 : a8000000fd630000 a8000000fd637ac0 ffffffff80937300 ffffffff8010807c [ 370.302909] Hi : 0000000000000000 [ 370.306595] Lo : 0000000000000200 [ 370.310376] epc : ffffffff80115d38 _save_fp+0x10/0xa0 [ 370.315784] ra : ffffffff8010807c prepare_for_fp_mode_switch+0x94/0x1b0 [ 370.322707] Status: 140084e2 KX SX UX KERNEL EXL [ 370.327980] Cause : 1080002c (ExcCode 0b) [ 370.332091] PrId : 0001a428 (MIPS P6600) [ 370.336179] Modules linked in: [ 370.339486] Process fp-prctl (pid: 963, threadinfo=a8000000fd630000, task=a8000000fd672e00, tls=00000000756e67d0) [ 370.349724] Stack : 0000000000000000 a8000000fd557dc0 0000000000000000 ffffffff801ca8e0 [ 370.358161] 0000000000000000 a8000000fd637b9c 0000000000000009 ffffffff80923780 [ 370.366575] ffffffff80850000 ffffffff8011610c 00000000000000b8 ffffffff801a5084 [ 370.374989] ffffffff8084a370 ffffffff8084a388 ffffffff80923780 ffffffff80923828 [ 370.383395] 0000000000010000 ffffffff809237a8 0000000000020000 ffffffff80a40000 [ 370.391817] 000000000000007c 00000000004a0000 00000000756dedd0 ffffffff801a5188 [ 370.400230] a800000002014900 0000000000000001 ffffffff80923780 0000000080923828 [ 370.408644] ffffffff80923780 ffffffff80923780 ffffffff80923828 ffffffff801a521c [ 370.417066] ffffffff80923780 ffffffff80923828 0000000000010000 ffffffff801a8f84 [ 370.425472] ffffffff80a40000 a8000000fd637c20 ffffffff80a39240 0000000000000001 [ 370.433885] ... [ 370.436562] Call Trace: [ 370.439222] [<ffffffff80115d38>] _save_fp+0x10/0xa0 [ 370.444305] [<ffffffff8010807c>] prepare_for_fp_mode_switch+0x94/0x1b0 [ 370.451035] [<ffffffff801ca8e0>] flush_smp_call_function_queue+0xf8/0x230 [ 370.457991] [<ffffffff8011610c>] ipi_call_interrupt+0xc/0x20 [ 370.463814] [<ffffffff801a5084>] __handle_irq_event_percpu+0xc4/0x1a8 [ 370.470404] [<ffffffff801a5188>] handle_irq_event_percpu+0x20/0x68 [ 370.476734] [<ffffffff801a521c>] handle_irq_event+0x4c/0x88 [ 370.482486] [<ffffffff801a8f84>] handle_edge_irq+0x12c/0x210 [ 370.488316] [<ffffffff801a47a0>] generic_handle_irq+0x38/0x48 [ 370.494280] [<ffffffff804a2dbc>] gic_handle_shared_int+0x194/0x268 [ 370.500616] [<ffffffff801a47a0>] generic_handle_irq+0x38/0x48 [ 370.506529] [<ffffffff80107e60>] do_IRQ+0x18/0x28 [ 370.511445] [<ffffffff804a1524>] plat_irq_dispatch+0xc4/0x140 [ 370.517339] [<ffffffff80106230>] ret_from_irq+0x0/0x4 [ 370.522583] [<ffffffff8010fad4>] do_ri+0x4fc/0x7e8 [ 370.527546] [<ffffffff80106220>] ret_from_exception+0x0/0x10 2) The IPI may arrive during kernel use of the FPU, since we generally only disable preemption around use of the FPU & leave interrupts enabled. This can lead to us unexpectedly losing access to the FPU in places where it previously had not been possible. For example: do_cpu invoked from kernel context![#2]: CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82 #2 task: 838e4000 ti: 88d38000 task.ti: 88d38000 $ 0 : 00000000 00000001 ffffffff 88d3fef8 $ 4 : 838e4000 88d38004 00000000 00000001 $ 8 : 3400fc01 801f8020 808e9100 24000000 $12 : dbffffff 807b69d8 807b0000 00000000 $16 : 00000000 80786150 00400fc4 809c0398 $20 : 809c0338 0040273c 88d3ff28 808e9d30 $24 : 808e9d30 00400fb4 $28 : 88d38000 88d3fe88 00000000 8011a2ac Hi : 0040273c Lo : 88d3ff28 epc : 80114178 _restore_fp+0x10/0xa0 ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660 Status: 1400fc03 KERNEL EXL IE Cause : 1080002c (ExcCode 0b) PrId : 0001a920 (MIPS I6400) Modules linked in: Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0) Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338 808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000 004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28 808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000 00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20 ... Call Trace: [<80114178>] _restore_fp+0x10/0xa0 [<8011a2ac>] mipsr2_decoder+0xd5c/0x1660 [<8010de18>] do_ri+0x90/0x6b8 [<80105c20>] ret_from_exception+0x0/0x10 At first glance a simple fix may seem to be to disable interrupts around kernel use of the FPU rather than merely preemption, however this would introduce further overhead outside of the mode switch path & doesn't solve the third problem: 3) The IPI may arrive whilst the kernel is running code that will lead to a preempt_disable() call & FPU usage soon. If this happens then the IPI will be serviced & we'll proceed to enable an FPU whilst the mode switch is in progress, leading to strange & inconsistent behaviour. Further to all of this is a separate but related problem: 4) There are various paths through which we may enable the FPU without the user having triggered a coprocessor 1 disabled exception. These paths are those in which we emulate instructions & then enable the FPU with the expectation that the user might execute an FP instruction shortly afterwards. However these paths have not previously checked whether an FP mode switch is underway for the task, and therefore could enable the FPU whilst such a mode switch is in progress leading to strange & inconsistent behaviour for user code. This patch fixes all of the above by taking a step back & re-examining our approach to FP mode switches. Up until now we have taken these basic steps: a) Prevent any threads that are part of the affected process from being able to obtain ownership of the FPU. b) Cause any threads that are part of the affected process and already have ownership of an FPU to lose it. c) Set the thread flags for each thread that is part of the affected process to reflect the new FP mode. d) Allow threads to obtain ownership of the FPU again. This approach is however more complex than necessary. All that we really require is that the mode switch has occurred for all threads that are part of the affected process before mips_set_process_fp_mode(), and thus the PR_SET_FP_MODE prctl() syscall, returns. This doesn't require that we stop threads from owning or using an FPU whilst a mode switch occurs, only that we force them to relinquish it after the mode switch has occurred such that they next own an FPU with the correct mode configured. Our basic steps therefore simplify to: A) Set the thread flags for each thread that is part of the affected process to reflect the new FP mode. B) Cause any threads that are part of the affected process and already have ownership of an FPU to lose it. We implement B) by forcing each CPU which might be running a thread which is part of the affected process to schedule a no-op function, which causes the affected thread to lose its FPU ownership when it is descheduled. The end result is simpler FP mode switching with less overhead in the FPU enable path (ie. enable_restore_fp_context()) and fewer moving parts. Signed-off-by: Paul Burton <paul.burton(a)mips.com> Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS") Fixes: 6b8322576e9d ("MIPS: Force CPUs to lose FP context during mode switches") Cc: James Hogan <jhogan(a)kernel.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: linux-mips(a)linux-mips.org Cc: stable <stable(a)vger.kernel.org> # v4.0+ diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index da2004cef2d5..b509371a6b0c 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -126,8 +126,6 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) for_each_possible_cpu(i) cpu_context(i, mm) = 0; - atomic_set(&mm->context.fp_mode_switching, 0); - mm->context.bd_emupage_allocmap = NULL; spin_lock_init(&mm->context.bd_emupage_lock); init_waitqueue_head(&mm->context.bd_emupage_queue); diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 8d85046adcc8..fe6001d748cf 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -29,6 +29,7 @@ #include <linux/kallsyms.h> #include <linux/random.h> #include <linux/prctl.h> +#include <linux/cpu.h> #include <asm/asm.h> #include <asm/bootinfo.h> @@ -691,19 +692,25 @@ int mips_get_process_fp_mode(struct task_struct *task) return value; } -static void prepare_for_fp_mode_switch(void *info) +static long prepare_for_fp_mode_switch(void *unused) { - struct mm_struct *mm = info; - - if (current->mm == mm) - lose_fpu(1); + /* + * This is icky, but we use this to simply ensure that all CPUs have + * context switched, regardless of whether they were previously running + * kernel or user code. This ensures that no CPU currently has its FPU + * enabled, or is about to attempt to enable it through any path other + * than enable_restore_fp_context() which will wait appropriately for + * fp_mode_switching to be zero. + */ + return 0; } int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) { const unsigned int known_bits = PR_FP_MODE_FR | PR_FP_MODE_FRE; struct task_struct *t; - int max_users; + struct cpumask process_cpus; + int cpu; /* If nothing to change, return right away, successfully. */ if (value == mips_get_process_fp_mode(task)) @@ -736,35 +743,7 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) if (!(value & PR_FP_MODE_FR) && raw_cpu_has_fpu && cpu_has_mips_r6) return -EOPNOTSUPP; - /* Proceed with the mode switch */ - preempt_disable(); - - /* Save FP & vector context, then disable FPU & MSA */ - if (task->signal == current->signal) - lose_fpu(1); - - /* Prevent any threads from obtaining live FP context */ - atomic_set(&task->mm->context.fp_mode_switching, 1); - smp_mb__after_atomic(); - - /* - * If there are multiple online CPUs then force any which are running - * threads in this process to lose their FPU context, which they can't - * regain until fp_mode_switching is cleared later. - */ - if (num_online_cpus() > 1) { - /* No need to send an IPI for the local CPU */ - max_users = (task->mm == current->mm) ? 1 : 0; - - if (atomic_read(&current->mm->mm_users) > max_users) - smp_call_function(prepare_for_fp_mode_switch, - (void *)current->mm, 1); - } - - /* - * There are now no threads of the process with live FP context, so it - * is safe to proceed with the FP mode switch. - */ + /* Indicate the new FP mode in each thread */ for_each_thread(task, t) { /* Update desired FP register width */ if (value & PR_FP_MODE_FR) { @@ -781,9 +760,34 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) clear_tsk_thread_flag(t, TIF_HYBRID_FPREGS); } - /* Allow threads to use FP again */ - atomic_set(&task->mm->context.fp_mode_switching, 0); - preempt_enable(); + /* + * We need to ensure that all threads in the process have switched mode + * before returning, in order to allow userland to not worry about + * races. We can do this by forcing all CPUs that any thread in the + * process may be running on to schedule something else - in this case + * prepare_for_fp_mode_switch(). + * + * We begin by generating a mask of all CPUs that any thread in the + * process may be running on. + */ + cpumask_clear(&process_cpus); + for_each_thread(task, t) + cpumask_set_cpu(task_cpu(t), &process_cpus); + + /* + * Now we schedule prepare_for_fp_mode_switch() on each of those CPUs. + * + * The CPUs may have rescheduled already since we switched mode or + * generated the cpumask, but that doesn't matter. If the task in this + * process is scheduled out then our scheduling + * prepare_for_fp_mode_switch() will simply be redundant. If it's + * scheduled in then it will already have picked up the new FP mode + * whilst doing so. + */ + get_online_cpus(); + for_each_cpu_and(cpu, &process_cpus, cpu_online_mask) + work_on_cpu(cpu, prepare_for_fp_mode_switch, NULL); + put_online_cpus(); wake_up_var(&task->mm->context.fp_mode_switching); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index d67fa74622ee..4d9ca9b465ae 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1220,13 +1220,6 @@ static int enable_restore_fp_context(int msa) { int err, was_fpu_owner, prior_msa; - /* - * If an FP mode switch is currently underway, wait for it to - * complete before proceeding. - */ - wait_var_event(&current->mm->context.fp_mode_switching, - !atomic_read(&current->mm->context.fp_mode_switching)); - if (!used_math()) { /* First time FP context user. */ preempt_disable();

7 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] MIPS: Schedule on CPUs we need to lose FPU for a mode switch" failed to apply to 4.18-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.18-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 8c8d953c28000045e5e823f3398319f04d49a7f1 Mon Sep 17 00:00:00 2001 From: Paul Burton <paul.burton(a)mips.com> Date: Tue, 19 Dec 2017 15:11:08 -0800 Subject: [PATCH] MIPS: Schedule on CPUs we need to lose FPU for a mode switch Commit 6b8322576e9d ("MIPS: Force CPUs to lose FP context during mode switches") ensures that we react to PR_SET_FP_MODE prctl syscalls quickly by broadcasting an IPI in order to cause CPUs to lose FPU access when necessary. Whilst it achieves that, unfortunately it causes all sorts of strange race conditions because: 1) The IPI may arrive at a point where the FPU is in the process of being enabled, but that process is not yet complete leading to a state we aren't prepared to handle. For example: [ 370.215903] do_cpu invoked from kernel context![#1]: [ 370.221064] CPU: 0 PID: 963 Comm: fp-prctl Not tainted 4.9.0-rc5-00323-g210db32-dirty #226 [ 370.229420] task: a8000000fd672e00 task.stack: a8000000fd630000 [ 370.235399] $ 0 : 0000000000000000 0000000000000001 0000000000000001 a8000000fd630000 [ 370.243882] $ 4 : a8000000fd672e00 0000000000000000 0000000000000453 0000000000000000 [ 370.252317] $ 8 : 0000000000000000 a8000000fd637c28 1000000000000000 0000000000000010 [ 370.260753] $12 : 00000000140084e0 ffffffff80109c00 0000000000000000 0000000000000002 [ 370.269179] $16 : ffffffff8092f080 a8000000fd672e00 ffffffff80107fe8 a8000000fd485000 [ 370.277612] $20 : ffffffff8084d328 ffffffff80940000 0000000000000009 ffffffff80930000 [ 370.286038] $24 : 0000000000000000 900000001612048c [ 370.294476] $28 : a8000000fd630000 a8000000fd637ac0 ffffffff80937300 ffffffff8010807c [ 370.302909] Hi : 0000000000000000 [ 370.306595] Lo : 0000000000000200 [ 370.310376] epc : ffffffff80115d38 _save_fp+0x10/0xa0 [ 370.315784] ra : ffffffff8010807c prepare_for_fp_mode_switch+0x94/0x1b0 [ 370.322707] Status: 140084e2 KX SX UX KERNEL EXL [ 370.327980] Cause : 1080002c (ExcCode 0b) [ 370.332091] PrId : 0001a428 (MIPS P6600) [ 370.336179] Modules linked in: [ 370.339486] Process fp-prctl (pid: 963, threadinfo=a8000000fd630000, task=a8000000fd672e00, tls=00000000756e67d0) [ 370.349724] Stack : 0000000000000000 a8000000fd557dc0 0000000000000000 ffffffff801ca8e0 [ 370.358161] 0000000000000000 a8000000fd637b9c 0000000000000009 ffffffff80923780 [ 370.366575] ffffffff80850000 ffffffff8011610c 00000000000000b8 ffffffff801a5084 [ 370.374989] ffffffff8084a370 ffffffff8084a388 ffffffff80923780 ffffffff80923828 [ 370.383395] 0000000000010000 ffffffff809237a8 0000000000020000 ffffffff80a40000 [ 370.391817] 000000000000007c 00000000004a0000 00000000756dedd0 ffffffff801a5188 [ 370.400230] a800000002014900 0000000000000001 ffffffff80923780 0000000080923828 [ 370.408644] ffffffff80923780 ffffffff80923780 ffffffff80923828 ffffffff801a521c [ 370.417066] ffffffff80923780 ffffffff80923828 0000000000010000 ffffffff801a8f84 [ 370.425472] ffffffff80a40000 a8000000fd637c20 ffffffff80a39240 0000000000000001 [ 370.433885] ... [ 370.436562] Call Trace: [ 370.439222] [<ffffffff80115d38>] _save_fp+0x10/0xa0 [ 370.444305] [<ffffffff8010807c>] prepare_for_fp_mode_switch+0x94/0x1b0 [ 370.451035] [<ffffffff801ca8e0>] flush_smp_call_function_queue+0xf8/0x230 [ 370.457991] [<ffffffff8011610c>] ipi_call_interrupt+0xc/0x20 [ 370.463814] [<ffffffff801a5084>] __handle_irq_event_percpu+0xc4/0x1a8 [ 370.470404] [<ffffffff801a5188>] handle_irq_event_percpu+0x20/0x68 [ 370.476734] [<ffffffff801a521c>] handle_irq_event+0x4c/0x88 [ 370.482486] [<ffffffff801a8f84>] handle_edge_irq+0x12c/0x210 [ 370.488316] [<ffffffff801a47a0>] generic_handle_irq+0x38/0x48 [ 370.494280] [<ffffffff804a2dbc>] gic_handle_shared_int+0x194/0x268 [ 370.500616] [<ffffffff801a47a0>] generic_handle_irq+0x38/0x48 [ 370.506529] [<ffffffff80107e60>] do_IRQ+0x18/0x28 [ 370.511445] [<ffffffff804a1524>] plat_irq_dispatch+0xc4/0x140 [ 370.517339] [<ffffffff80106230>] ret_from_irq+0x0/0x4 [ 370.522583] [<ffffffff8010fad4>] do_ri+0x4fc/0x7e8 [ 370.527546] [<ffffffff80106220>] ret_from_exception+0x0/0x10 2) The IPI may arrive during kernel use of the FPU, since we generally only disable preemption around use of the FPU & leave interrupts enabled. This can lead to us unexpectedly losing access to the FPU in places where it previously had not been possible. For example: do_cpu invoked from kernel context![#2]: CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82 #2 task: 838e4000 ti: 88d38000 task.ti: 88d38000 $ 0 : 00000000 00000001 ffffffff 88d3fef8 $ 4 : 838e4000 88d38004 00000000 00000001 $ 8 : 3400fc01 801f8020 808e9100 24000000 $12 : dbffffff 807b69d8 807b0000 00000000 $16 : 00000000 80786150 00400fc4 809c0398 $20 : 809c0338 0040273c 88d3ff28 808e9d30 $24 : 808e9d30 00400fb4 $28 : 88d38000 88d3fe88 00000000 8011a2ac Hi : 0040273c Lo : 88d3ff28 epc : 80114178 _restore_fp+0x10/0xa0 ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660 Status: 1400fc03 KERNEL EXL IE Cause : 1080002c (ExcCode 0b) PrId : 0001a920 (MIPS I6400) Modules linked in: Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0) Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338 808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000 004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28 808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000 00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20 ... Call Trace: [<80114178>] _restore_fp+0x10/0xa0 [<8011a2ac>] mipsr2_decoder+0xd5c/0x1660 [<8010de18>] do_ri+0x90/0x6b8 [<80105c20>] ret_from_exception+0x0/0x10 At first glance a simple fix may seem to be to disable interrupts around kernel use of the FPU rather than merely preemption, however this would introduce further overhead outside of the mode switch path & doesn't solve the third problem: 3) The IPI may arrive whilst the kernel is running code that will lead to a preempt_disable() call & FPU usage soon. If this happens then the IPI will be serviced & we'll proceed to enable an FPU whilst the mode switch is in progress, leading to strange & inconsistent behaviour. Further to all of this is a separate but related problem: 4) There are various paths through which we may enable the FPU without the user having triggered a coprocessor 1 disabled exception. These paths are those in which we emulate instructions & then enable the FPU with the expectation that the user might execute an FP instruction shortly afterwards. However these paths have not previously checked whether an FP mode switch is underway for the task, and therefore could enable the FPU whilst such a mode switch is in progress leading to strange & inconsistent behaviour for user code. This patch fixes all of the above by taking a step back & re-examining our approach to FP mode switches. Up until now we have taken these basic steps: a) Prevent any threads that are part of the affected process from being able to obtain ownership of the FPU. b) Cause any threads that are part of the affected process and already have ownership of an FPU to lose it. c) Set the thread flags for each thread that is part of the affected process to reflect the new FP mode. d) Allow threads to obtain ownership of the FPU again. This approach is however more complex than necessary. All that we really require is that the mode switch has occurred for all threads that are part of the affected process before mips_set_process_fp_mode(), and thus the PR_SET_FP_MODE prctl() syscall, returns. This doesn't require that we stop threads from owning or using an FPU whilst a mode switch occurs, only that we force them to relinquish it after the mode switch has occurred such that they next own an FPU with the correct mode configured. Our basic steps therefore simplify to: A) Set the thread flags for each thread that is part of the affected process to reflect the new FP mode. B) Cause any threads that are part of the affected process and already have ownership of an FPU to lose it. We implement B) by forcing each CPU which might be running a thread which is part of the affected process to schedule a no-op function, which causes the affected thread to lose its FPU ownership when it is descheduled. The end result is simpler FP mode switching with less overhead in the FPU enable path (ie. enable_restore_fp_context()) and fewer moving parts. Signed-off-by: Paul Burton <paul.burton(a)mips.com> Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS") Fixes: 6b8322576e9d ("MIPS: Force CPUs to lose FP context during mode switches") Cc: James Hogan <jhogan(a)kernel.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: linux-mips(a)linux-mips.org Cc: stable <stable(a)vger.kernel.org> # v4.0+ diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index da2004cef2d5..b509371a6b0c 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -126,8 +126,6 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) for_each_possible_cpu(i) cpu_context(i, mm) = 0; - atomic_set(&mm->context.fp_mode_switching, 0); - mm->context.bd_emupage_allocmap = NULL; spin_lock_init(&mm->context.bd_emupage_lock); init_waitqueue_head(&mm->context.bd_emupage_queue); diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 8d85046adcc8..fe6001d748cf 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -29,6 +29,7 @@ #include <linux/kallsyms.h> #include <linux/random.h> #include <linux/prctl.h> +#include <linux/cpu.h> #include <asm/asm.h> #include <asm/bootinfo.h> @@ -691,19 +692,25 @@ int mips_get_process_fp_mode(struct task_struct *task) return value; } -static void prepare_for_fp_mode_switch(void *info) +static long prepare_for_fp_mode_switch(void *unused) { - struct mm_struct *mm = info; - - if (current->mm == mm) - lose_fpu(1); + /* + * This is icky, but we use this to simply ensure that all CPUs have + * context switched, regardless of whether they were previously running + * kernel or user code. This ensures that no CPU currently has its FPU + * enabled, or is about to attempt to enable it through any path other + * than enable_restore_fp_context() which will wait appropriately for + * fp_mode_switching to be zero. + */ + return 0; } int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) { const unsigned int known_bits = PR_FP_MODE_FR | PR_FP_MODE_FRE; struct task_struct *t; - int max_users; + struct cpumask process_cpus; + int cpu; /* If nothing to change, return right away, successfully. */ if (value == mips_get_process_fp_mode(task)) @@ -736,35 +743,7 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) if (!(value & PR_FP_MODE_FR) && raw_cpu_has_fpu && cpu_has_mips_r6) return -EOPNOTSUPP; - /* Proceed with the mode switch */ - preempt_disable(); - - /* Save FP & vector context, then disable FPU & MSA */ - if (task->signal == current->signal) - lose_fpu(1); - - /* Prevent any threads from obtaining live FP context */ - atomic_set(&task->mm->context.fp_mode_switching, 1); - smp_mb__after_atomic(); - - /* - * If there are multiple online CPUs then force any which are running - * threads in this process to lose their FPU context, which they can't - * regain until fp_mode_switching is cleared later. - */ - if (num_online_cpus() > 1) { - /* No need to send an IPI for the local CPU */ - max_users = (task->mm == current->mm) ? 1 : 0; - - if (atomic_read(&current->mm->mm_users) > max_users) - smp_call_function(prepare_for_fp_mode_switch, - (void *)current->mm, 1); - } - - /* - * There are now no threads of the process with live FP context, so it - * is safe to proceed with the FP mode switch. - */ + /* Indicate the new FP mode in each thread */ for_each_thread(task, t) { /* Update desired FP register width */ if (value & PR_FP_MODE_FR) { @@ -781,9 +760,34 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) clear_tsk_thread_flag(t, TIF_HYBRID_FPREGS); } - /* Allow threads to use FP again */ - atomic_set(&task->mm->context.fp_mode_switching, 0); - preempt_enable(); + /* + * We need to ensure that all threads in the process have switched mode + * before returning, in order to allow userland to not worry about + * races. We can do this by forcing all CPUs that any thread in the + * process may be running on to schedule something else - in this case + * prepare_for_fp_mode_switch(). + * + * We begin by generating a mask of all CPUs that any thread in the + * process may be running on. + */ + cpumask_clear(&process_cpus); + for_each_thread(task, t) + cpumask_set_cpu(task_cpu(t), &process_cpus); + + /* + * Now we schedule prepare_for_fp_mode_switch() on each of those CPUs. + * + * The CPUs may have rescheduled already since we switched mode or + * generated the cpumask, but that doesn't matter. If the task in this + * process is scheduled out then our scheduling + * prepare_for_fp_mode_switch() will simply be redundant. If it's + * scheduled in then it will already have picked up the new FP mode + * whilst doing so. + */ + get_online_cpus(); + for_each_cpu_and(cpu, &process_cpus, cpu_online_mask) + work_on_cpu(cpu, prepare_for_fp_mode_switch, NULL); + put_online_cpus(); wake_up_var(&task->mm->context.fp_mode_switching); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index d67fa74622ee..4d9ca9b465ae 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1220,13 +1220,6 @@ static int enable_restore_fp_context(int msa) { int err, was_fpu_owner, prior_msa; - /* - * If an FP mode switch is currently underway, wait for it to - * complete before proceeding. - */ - wait_var_event(&current->mm->context.fp_mode_switching, - !atomic_read(&current->mm->context.fp_mode_switching)); - if (!used_math()) { /* First time FP context user. */ preempt_disable();

7 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] MIPS: Always use -march=<arch>, not -<arch> shortcuts" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 344ebf09949c31bcb8818d8458b65add29f1d67b Mon Sep 17 00:00:00 2001 From: Paul Burton <paul.burton(a)mips.com> Date: Mon, 18 Jun 2018 17:37:59 -0700 Subject: [PATCH] MIPS: Always use -march=<arch>, not -<arch> shortcuts The VDSO Makefile filters CFLAGS to select a subset which it uses whilst building the VDSO ELF. One of the flags it allows through is the -march= flag that selects the architecture/ISA to target. Unfortunately in cases where CONFIG_CPU_MIPS32_R{1,2}=y and the toolchain defaults to building for MIPS64, the main MIPS Makefile ends up using the short-form -<arch> flags in cflags-y. This is because the calls to cc-option always fail to use the long-form -march=<arch> flag due to the lack of an -mabi=<abi> flag in KBUILD_CFLAGS at the point where the cc-option function is executed. The resulting GCC invocation is something like: $ mips64-linux-gcc -Werror -march=mips32r2 -c -x c /dev/null -o tmp cc1: error: '-march=mips32r2' is not compatible with the selected ABI These short-form -<arch> flags are dropped by the VDSO Makefile's filtering, and so we attempt to build the VDSO without specifying any architecture. This results in an attempt to build the VDSO using whatever the compiler's default architecture is, regardless of whether that is suitable for the kernel configuration. One encountered build failure resulting from this mismatch is a rejection of the sync instruction if the kernel is configured for a MIPS32 or MIPS64 r1 or r2 target but the toolchain defaults to an older architecture revision such as MIPS1 which did not include the sync instruction: CC arch/mips/vdso/gettimeofday.o /tmp/ccGQKoOj.s: Assembler messages: /tmp/ccGQKoOj.s:273: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:329: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:520: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:714: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1009: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1066: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1114: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1279: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1334: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1374: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1459: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1514: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1814: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:2002: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:2066: Error: opcode not supported on this processor: mips1 (mips1) `sync' make[2]: *** [scripts/Makefile.build:318: arch/mips/vdso/gettimeofday.o] Error 1 make[1]: *** [scripts/Makefile.build:558: arch/mips/vdso] Error 2 make[1]: *** Waiting for unfinished jobs.... This can be reproduced for example by attempting to build pistachio_defconfig using Arnd's GCC 8.1.0 mips64 toolchain from kernel.org: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/… Resolve this problem by using the long-form -march=<arch> in all cases, which makes it through the arch/mips/vdso/Makefile's filtering & is thus consistently used to build both the kernel proper & the VDSO. The use of cc-option to prefer the long-form & fall back to the short-form flags makes no sense since the short-form is just an abbreviation for the also-supported long-form in all GCC versions that we support building with. This means there is no case in which we have to use the short-form -<arch> flags, so we can simply remove them. The manual redefinition of _MIPS_ISA is removed naturally along with the use of the short-form flags that it accompanied, and whilst here we remove the separate assembler ISA selection. I suspect that both of these were only required due to the mips32 vs mips2 mismatch that was introduced by commit 59b3e8e9aac6 ("[MIPS] Makefile crapectomy.") and fixed but not cleaned up by commit 9200c0b2a07c ("[MIPS] Fix Makefile bugs for MIPS32/MIPS64 R1 and R2."). I've marked this for backport as far as v4.4 where the MIPS VDSO was introduced. In earlier kernels there should be no ill effect to using the short-form flags. Signed-off-by: Paul Burton <paul.burton(a)mips.com> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: linux-mips(a)linux-mips.org Cc: stable(a)vger.kernel.org # v4.4+ Reviewed-by: James Hogan <jhogan(a)kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/19579/ diff --git a/arch/mips/Makefile b/arch/mips/Makefile index e2122cca4ae2..1e98d22ec119 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -155,15 +155,11 @@ cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ - -Wa,-mips32 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ - -Wa,-mips32r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R1) += -march=mips32 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap -modd-spreg -cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ - -Wa,-mips64 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ - -Wa,-mips64r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \

7 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] MIPS: Always use -march=<arch>, not -<arch> shortcuts" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 344ebf09949c31bcb8818d8458b65add29f1d67b Mon Sep 17 00:00:00 2001 From: Paul Burton <paul.burton(a)mips.com> Date: Mon, 18 Jun 2018 17:37:59 -0700 Subject: [PATCH] MIPS: Always use -march=<arch>, not -<arch> shortcuts The VDSO Makefile filters CFLAGS to select a subset which it uses whilst building the VDSO ELF. One of the flags it allows through is the -march= flag that selects the architecture/ISA to target. Unfortunately in cases where CONFIG_CPU_MIPS32_R{1,2}=y and the toolchain defaults to building for MIPS64, the main MIPS Makefile ends up using the short-form -<arch> flags in cflags-y. This is because the calls to cc-option always fail to use the long-form -march=<arch> flag due to the lack of an -mabi=<abi> flag in KBUILD_CFLAGS at the point where the cc-option function is executed. The resulting GCC invocation is something like: $ mips64-linux-gcc -Werror -march=mips32r2 -c -x c /dev/null -o tmp cc1: error: '-march=mips32r2' is not compatible with the selected ABI These short-form -<arch> flags are dropped by the VDSO Makefile's filtering, and so we attempt to build the VDSO without specifying any architecture. This results in an attempt to build the VDSO using whatever the compiler's default architecture is, regardless of whether that is suitable for the kernel configuration. One encountered build failure resulting from this mismatch is a rejection of the sync instruction if the kernel is configured for a MIPS32 or MIPS64 r1 or r2 target but the toolchain defaults to an older architecture revision such as MIPS1 which did not include the sync instruction: CC arch/mips/vdso/gettimeofday.o /tmp/ccGQKoOj.s: Assembler messages: /tmp/ccGQKoOj.s:273: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:329: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:520: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:714: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1009: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1066: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1114: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1279: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1334: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1374: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1459: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1514: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:1814: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:2002: Error: opcode not supported on this processor: mips1 (mips1) `sync' /tmp/ccGQKoOj.s:2066: Error: opcode not supported on this processor: mips1 (mips1) `sync' make[2]: *** [scripts/Makefile.build:318: arch/mips/vdso/gettimeofday.o] Error 1 make[1]: *** [scripts/Makefile.build:558: arch/mips/vdso] Error 2 make[1]: *** Waiting for unfinished jobs.... This can be reproduced for example by attempting to build pistachio_defconfig using Arnd's GCC 8.1.0 mips64 toolchain from kernel.org: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/… Resolve this problem by using the long-form -march=<arch> in all cases, which makes it through the arch/mips/vdso/Makefile's filtering & is thus consistently used to build both the kernel proper & the VDSO. The use of cc-option to prefer the long-form & fall back to the short-form flags makes no sense since the short-form is just an abbreviation for the also-supported long-form in all GCC versions that we support building with. This means there is no case in which we have to use the short-form -<arch> flags, so we can simply remove them. The manual redefinition of _MIPS_ISA is removed naturally along with the use of the short-form flags that it accompanied, and whilst here we remove the separate assembler ISA selection. I suspect that both of these were only required due to the mips32 vs mips2 mismatch that was introduced by commit 59b3e8e9aac6 ("[MIPS] Makefile crapectomy.") and fixed but not cleaned up by commit 9200c0b2a07c ("[MIPS] Fix Makefile bugs for MIPS32/MIPS64 R1 and R2."). I've marked this for backport as far as v4.4 where the MIPS VDSO was introduced. In earlier kernels there should be no ill effect to using the short-form flags. Signed-off-by: Paul Burton <paul.burton(a)mips.com> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: linux-mips(a)linux-mips.org Cc: stable(a)vger.kernel.org # v4.4+ Reviewed-by: James Hogan <jhogan(a)kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/19579/ diff --git a/arch/mips/Makefile b/arch/mips/Makefile index e2122cca4ae2..1e98d22ec119 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -155,15 +155,11 @@ cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ - -Wa,-mips32 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ - -Wa,-mips32r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R1) += -march=mips32 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap -modd-spreg -cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ - -Wa,-mips64 -Wa,--trap -cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ - -Wa,-mips64r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \

7 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] MIPS: memset.S: Fix byte_fixup for MIPSr6" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b1c03f1ef48d36ff28afb06e8f0c1233ef072f1d Mon Sep 17 00:00:00 2001 From: Matt Redfearn <matt.redfearn(a)mips.com> Date: Wed, 23 May 2018 14:39:58 +0100 Subject: [PATCH] MIPS: memset.S: Fix byte_fixup for MIPSr6 The __clear_user function is defined to return the number of bytes that could not be cleared. From the underlying memset / bzero implementation this means setting register a2 to that number on return. Currently if a page fault is triggered within the MIPSr6 version of setting of initial unaligned bytes, the value loaded into a2 on return is meaningless. During the MIPSr6 version of the initial unaligned bytes block, register a2 contains the number of bytes to be set beyond the initial unaligned bytes. The t0 register is initally set to the number of unaligned bytes - STORSIZE, effectively a negative version of the number of unaligned bytes. This is then incremented before each byte is saved. The label .Lbyte_fixup\@ is jumped to on page fault. Currently the value in a2 is incorrectly replaced by 0 - t0 + 1, effectively the number of unaligned bytes remaining. This leads to the failures being reported by the following test code: static int __init test_clear_user(void) { int j, k; pr_info("\n\n\nTesting clear_user\n"); for (j = 0; j < 512; j++) { if ((k = clear_user(NULL+3, j)) != j) { pr_err("clear_user (NULL %d) returned %d\n", j, k); } } return 0; } late_initcall(test_clear_user); Which reports: [ 3.965439] Testing clear_user [ 3.973169] clear_user (NULL 8) returned 6 [ 3.976782] clear_user (NULL 9) returned 6 [ 3.980390] clear_user (NULL 10) returned 6 [ 3.984052] clear_user (NULL 11) returned 6 [ 3.987524] clear_user (NULL 12) returned 6 Fix this by subtracting t0 from a2 (rather than $0), effectivey giving: unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1 a2 = a2 - t0 + 1 This fixes the value returned from __clear user when the number of bytes to set is > LONGSIZE and the address is invalid and unaligned. Unfortunately, this breaks the fixup handling for unaligned bytes after the final long, where register a2 still contains the number of bytes remaining to be set and the t0 register is to 0 - the number of unaligned bytes remaining. Because t0 is now is now subtracted from a2 rather than 0, the number of bytes unset is reported incorrectly: static int __init test_clear_user(void) { char *test; int j, k; pr_info("\n\n\nTesting clear_user\n"); test = vmalloc(PAGE_SIZE); for (j = 256; j < 512; j++) { if ((k = clear_user(test + PAGE_SIZE - 254, j)) != j - 254) { pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 254, j, k); } } return 0; } late_initcall(test_clear_user); [ 3.976775] clear_user (c00000000000df02 256) returned 4 [ 3.981957] clear_user (c00000000000df02 257) returned 6 [ 3.986425] clear_user (c00000000000df02 258) returned 8 [ 3.990850] clear_user (c00000000000df02 259) returned 10 [ 3.995332] clear_user (c00000000000df02 260) returned 12 [ 3.999815] clear_user (c00000000000df02 261) returned 14 Fix this by ensuring that a2 is set to 0 during the set of final unaligned bytes. Signed-off-by: Matt Redfearn <matt.redfearn(a)mips.com> Signed-off-by: Paul Burton <paul.burton(a)mips.com> Fixes: 8c56208aff77 ("MIPS: lib: memset: Add MIPS R6 support") Patchwork: https://patchwork.linux-mips.org/patch/19338/ Cc: James Hogan <jhogan(a)kernel.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: linux-mips(a)linux-mips.org Cc: linux-kernel(a)vger.kernel.org Cc: stable(a)vger.kernel.org # v4.0+ diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S index 1cc306520a55..fac26ce64b2f 100644 --- a/arch/mips/lib/memset.S +++ b/arch/mips/lib/memset.S @@ -195,6 +195,7 @@ #endif #else PTR_SUBU t0, $0, a2 + move a2, zero /* No remaining longs */ PTR_ADDIU t0, 1 STORE_BYTE(0) STORE_BYTE(1) @@ -231,7 +232,7 @@ #ifdef CONFIG_CPU_MIPSR6 .Lbyte_fixup\@: - PTR_SUBU a2, $0, t0 + PTR_SUBU a2, t0 jr ra PTR_ADDIU a2, 1 #endif /* CONFIG_CPU_MIPSR6 */

7 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] MIPS: memset.S: Fix byte_fixup for MIPSr6" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b1c03f1ef48d36ff28afb06e8f0c1233ef072f1d Mon Sep 17 00:00:00 2001 From: Matt Redfearn <matt.redfearn(a)mips.com> Date: Wed, 23 May 2018 14:39:58 +0100 Subject: [PATCH] MIPS: memset.S: Fix byte_fixup for MIPSr6 The __clear_user function is defined to return the number of bytes that could not be cleared. From the underlying memset / bzero implementation this means setting register a2 to that number on return. Currently if a page fault is triggered within the MIPSr6 version of setting of initial unaligned bytes, the value loaded into a2 on return is meaningless. During the MIPSr6 version of the initial unaligned bytes block, register a2 contains the number of bytes to be set beyond the initial unaligned bytes. The t0 register is initally set to the number of unaligned bytes - STORSIZE, effectively a negative version of the number of unaligned bytes. This is then incremented before each byte is saved. The label .Lbyte_fixup\@ is jumped to on page fault. Currently the value in a2 is incorrectly replaced by 0 - t0 + 1, effectively the number of unaligned bytes remaining. This leads to the failures being reported by the following test code: static int __init test_clear_user(void) { int j, k; pr_info("\n\n\nTesting clear_user\n"); for (j = 0; j < 512; j++) { if ((k = clear_user(NULL+3, j)) != j) { pr_err("clear_user (NULL %d) returned %d\n", j, k); } } return 0; } late_initcall(test_clear_user); Which reports: [ 3.965439] Testing clear_user [ 3.973169] clear_user (NULL 8) returned 6 [ 3.976782] clear_user (NULL 9) returned 6 [ 3.980390] clear_user (NULL 10) returned 6 [ 3.984052] clear_user (NULL 11) returned 6 [ 3.987524] clear_user (NULL 12) returned 6 Fix this by subtracting t0 from a2 (rather than $0), effectivey giving: unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1 a2 = a2 - t0 + 1 This fixes the value returned from __clear user when the number of bytes to set is > LONGSIZE and the address is invalid and unaligned. Unfortunately, this breaks the fixup handling for unaligned bytes after the final long, where register a2 still contains the number of bytes remaining to be set and the t0 register is to 0 - the number of unaligned bytes remaining. Because t0 is now is now subtracted from a2 rather than 0, the number of bytes unset is reported incorrectly: static int __init test_clear_user(void) { char *test; int j, k; pr_info("\n\n\nTesting clear_user\n"); test = vmalloc(PAGE_SIZE); for (j = 256; j < 512; j++) { if ((k = clear_user(test + PAGE_SIZE - 254, j)) != j - 254) { pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 254, j, k); } } return 0; } late_initcall(test_clear_user); [ 3.976775] clear_user (c00000000000df02 256) returned 4 [ 3.981957] clear_user (c00000000000df02 257) returned 6 [ 3.986425] clear_user (c00000000000df02 258) returned 8 [ 3.990850] clear_user (c00000000000df02 259) returned 10 [ 3.995332] clear_user (c00000000000df02 260) returned 12 [ 3.999815] clear_user (c00000000000df02 261) returned 14 Fix this by ensuring that a2 is set to 0 during the set of final unaligned bytes. Signed-off-by: Matt Redfearn <matt.redfearn(a)mips.com> Signed-off-by: Paul Burton <paul.burton(a)mips.com> Fixes: 8c56208aff77 ("MIPS: lib: memset: Add MIPS R6 support") Patchwork: https://patchwork.linux-mips.org/patch/19338/ Cc: James Hogan <jhogan(a)kernel.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: linux-mips(a)linux-mips.org Cc: linux-kernel(a)vger.kernel.org Cc: stable(a)vger.kernel.org # v4.0+ diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S index 1cc306520a55..fac26ce64b2f 100644 --- a/arch/mips/lib/memset.S +++ b/arch/mips/lib/memset.S @@ -195,6 +195,7 @@ #endif #else PTR_SUBU t0, $0, a2 + move a2, zero /* No remaining longs */ PTR_ADDIU t0, 1 STORE_BYTE(0) STORE_BYTE(1) @@ -231,7 +232,7 @@ #ifdef CONFIG_CPU_MIPSR6 .Lbyte_fixup\@: - PTR_SUBU a2, $0, t0 + PTR_SUBU a2, t0 jr ra PTR_ADDIU a2, 1 #endif /* CONFIG_CPU_MIPSR6 */

7 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] MIPS: memset.S: Fix byte_fixup for MIPSr6" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b1c03f1ef48d36ff28afb06e8f0c1233ef072f1d Mon Sep 17 00:00:00 2001 From: Matt Redfearn <matt.redfearn(a)mips.com> Date: Wed, 23 May 2018 14:39:58 +0100 Subject: [PATCH] MIPS: memset.S: Fix byte_fixup for MIPSr6 The __clear_user function is defined to return the number of bytes that could not be cleared. From the underlying memset / bzero implementation this means setting register a2 to that number on return. Currently if a page fault is triggered within the MIPSr6 version of setting of initial unaligned bytes, the value loaded into a2 on return is meaningless. During the MIPSr6 version of the initial unaligned bytes block, register a2 contains the number of bytes to be set beyond the initial unaligned bytes. The t0 register is initally set to the number of unaligned bytes - STORSIZE, effectively a negative version of the number of unaligned bytes. This is then incremented before each byte is saved. The label .Lbyte_fixup\@ is jumped to on page fault. Currently the value in a2 is incorrectly replaced by 0 - t0 + 1, effectively the number of unaligned bytes remaining. This leads to the failures being reported by the following test code: static int __init test_clear_user(void) { int j, k; pr_info("\n\n\nTesting clear_user\n"); for (j = 0; j < 512; j++) { if ((k = clear_user(NULL+3, j)) != j) { pr_err("clear_user (NULL %d) returned %d\n", j, k); } } return 0; } late_initcall(test_clear_user); Which reports: [ 3.965439] Testing clear_user [ 3.973169] clear_user (NULL 8) returned 6 [ 3.976782] clear_user (NULL 9) returned 6 [ 3.980390] clear_user (NULL 10) returned 6 [ 3.984052] clear_user (NULL 11) returned 6 [ 3.987524] clear_user (NULL 12) returned 6 Fix this by subtracting t0 from a2 (rather than $0), effectivey giving: unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1 a2 = a2 - t0 + 1 This fixes the value returned from __clear user when the number of bytes to set is > LONGSIZE and the address is invalid and unaligned. Unfortunately, this breaks the fixup handling for unaligned bytes after the final long, where register a2 still contains the number of bytes remaining to be set and the t0 register is to 0 - the number of unaligned bytes remaining. Because t0 is now is now subtracted from a2 rather than 0, the number of bytes unset is reported incorrectly: static int __init test_clear_user(void) { char *test; int j, k; pr_info("\n\n\nTesting clear_user\n"); test = vmalloc(PAGE_SIZE); for (j = 256; j < 512; j++) { if ((k = clear_user(test + PAGE_SIZE - 254, j)) != j - 254) { pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 254, j, k); } } return 0; } late_initcall(test_clear_user); [ 3.976775] clear_user (c00000000000df02 256) returned 4 [ 3.981957] clear_user (c00000000000df02 257) returned 6 [ 3.986425] clear_user (c00000000000df02 258) returned 8 [ 3.990850] clear_user (c00000000000df02 259) returned 10 [ 3.995332] clear_user (c00000000000df02 260) returned 12 [ 3.999815] clear_user (c00000000000df02 261) returned 14 Fix this by ensuring that a2 is set to 0 during the set of final unaligned bytes. Signed-off-by: Matt Redfearn <matt.redfearn(a)mips.com> Signed-off-by: Paul Burton <paul.burton(a)mips.com> Fixes: 8c56208aff77 ("MIPS: lib: memset: Add MIPS R6 support") Patchwork: https://patchwork.linux-mips.org/patch/19338/ Cc: James Hogan <jhogan(a)kernel.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: linux-mips(a)linux-mips.org Cc: linux-kernel(a)vger.kernel.org Cc: stable(a)vger.kernel.org # v4.0+ diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S index 1cc306520a55..fac26ce64b2f 100644 --- a/arch/mips/lib/memset.S +++ b/arch/mips/lib/memset.S @@ -195,6 +195,7 @@ #endif #else PTR_SUBU t0, $0, a2 + move a2, zero /* No remaining longs */ PTR_ADDIU t0, 1 STORE_BYTE(0) STORE_BYTE(1) @@ -231,7 +232,7 @@ #ifdef CONFIG_CPU_MIPSR6 .Lbyte_fixup\@: - PTR_SUBU a2, $0, t0 + PTR_SUBU a2, t0 jr ra PTR_ADDIU a2, 1 #endif /* CONFIG_CPU_MIPSR6 */

7 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] kprobes: Show address of kprobes if kallsyms does" failed to apply to 4.18-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.18-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 81365a947de453bcaba2558f8de5dadcffe05bc1 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu <mhiramat(a)kernel.org> Date: Sat, 28 Apr 2018 21:36:02 +0900 Subject: [PATCH] kprobes: Show address of kprobes if kallsyms does Show probed address in debugfs kprobe list file as same as kallsyms does. This information is used for checking kprobes are placed in the expected address. So it should be able to compared with address in kallsyms. Signed-off-by: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Ananth N Mavinakayanahalli <ananth(a)in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy(a)intel.com> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: David Howells <dhowells(a)redhat.com> Cc: David S . Miller <davem(a)davemloft.net> Cc: Heiko Carstens <heiko.carstens(a)de.ibm.com> Cc: Jon Medhurst <tixy(a)linaro.org> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Thomas Richter <tmricht(a)linux.ibm.com> Cc: Tobin C . Harding <me(a)tobin.cc> Cc: Will Deacon <will.deacon(a)arm.com> Cc: acme(a)kernel.org Cc: akpm(a)linux-foundation.org Cc: brueckner(a)linux.vnet.ibm.com Cc: linux-arch(a)vger.kernel.org Cc: rostedt(a)goodmis.org Cc: schwidefsky(a)de.ibm.com Cc: stable(a)vger.kernel.org Link: https://lkml.kernel.org/lkml/152491896256.9916.1583733714492565296.stgit@de… Signed-off-by: Ingo Molnar <mingo(a)kernel.org> diff --git a/kernel/kprobes.c b/kernel/kprobes.c index ab1bfa3d1d9c..1d6130d2937a 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -2226,19 +2226,23 @@ static void report_probe(struct seq_file *pi, struct kprobe *p, const char *sym, int offset, char *modname, struct kprobe *pp) { char *kprobe_type; + void *addr = p->addr; if (p->pre_handler == pre_handler_kretprobe) kprobe_type = "r"; else kprobe_type = "k"; + if (!kallsyms_show_value()) + addr = NULL; + if (sym) - seq_printf(pi, "%p %s %s+0x%x %s ", - p->addr, kprobe_type, sym, offset, + seq_printf(pi, "%px %s %s+0x%x %s ", + addr, kprobe_type, sym, offset, (modname ? modname : " ")); - else - seq_printf(pi, "%p %s %p ", - p->addr, kprobe_type, p->addr); + else /* try to use %pS */ + seq_printf(pi, "%px %s %pS ", + addr, kprobe_type, p->addr); if (!pp) pp = p;

7 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror