- Linux-stable-mirror - lists.linaro.org

Applied "spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE" to the spi tree

by Mark Brown

The patch spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE has been applied to the spi tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 5223c9c1cbfc0cd4d0a1b50758e0949af3290fa1 Mon Sep 17 00:00:00 2001 From: Angelo Dureghello <angelo(a)sysam.it> Date: Sat, 18 Aug 2018 01:51:58 +0200 Subject: [PATCH] spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE This patch fixes the dspi_eoq_write function used by the ColdFire mcf5441x family. The 16 bit cmd part must be re-set at each data transfer. Also, now that fifo_size variables are used for eoq_read/write, a proper fifo size must be set (16 slots for the ColdFire dspi module version). Signed-off-by: Angelo Dureghello <angelo(a)sysam.it> Acked-by: Esben Haabendal <esben(a)haabendal.dk> Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: stable(a)vger.kernel.org --- drivers/spi/spi-fsl-dspi.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 7cb3ab0a35a0..3082e72e4f6c 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -30,7 +30,11 @@ #define DRIVER_NAME "fsl-dspi" +#ifdef CONFIG_M5441x +#define DSPI_FIFO_SIZE 16 +#else #define DSPI_FIFO_SIZE 4 +#endif #define DSPI_DMA_BUFSIZE (DSPI_FIFO_SIZE * 1024) #define SPI_MCR 0x00 @@ -623,9 +627,11 @@ static void dspi_tcfq_read(struct fsl_dspi *dspi) static void dspi_eoq_write(struct fsl_dspi *dspi) { int fifo_size = DSPI_FIFO_SIZE; + u16 xfer_cmd = dspi->tx_cmd; /* Fill TX FIFO with as many transfers as possible */ while (dspi->len && fifo_size--) { + dspi->tx_cmd = xfer_cmd; /* Request EOQF for last transfer in FIFO */ if (dspi->len == dspi->bytes_per_word || fifo_size == 0) dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ; -- 2.18.0

7 years, 2 months

1
0
0 0

Please apply commit d1e20222d537 to 4.14.y and 4.18.y

by Jitendra Bhivare

Subject of the patch: iommu/arm-smmu: Error out only if not enough context interrupts Commit ID: 42b88ec6530fd76f1ae06de7f09830bcbca5bbd6 Why: ARM SMMU does not initialize for Broadcom Stingray SoC if bootloader reserves few contexts. Kernel should not error out if there are enough context interrupts. Patch

7 years, 2 months

1
0
0 0

Profil.

by Thomas Weber

Sehr geehrte Damen und Herren. Nachdem wir Ihre Webseite besucht und das Profil Ihrer Geschäftstätigkeit analysiert haben, wissen wir schon, wie Sie neue Kunden ab sofort gewinnen können. Wir verfügen über mehr als 100 000 Adressenangaben der potentiellen Kunden. Diese Daten wurden nach Branchen gegliedert. http://www.gbc-at.net/?page=catalog *** 1. Österreich 2018 ( 104 000 ) - 149 EUR ( bis zum 29.08.2018 ) *** Bitte informieren Sie sich über die weiteren Details einmal unverbindlich auf unseren Webseite: http://www.gbc-at.net/?page=catalog Die Adressensortierung je nach der Branche findet KOSTENLOS im beigelegten DataManager-Programm statt. Zusätzlich bieten wir KOSTENLOS das Tool zum automatischen Verschicken der Angebote an. MfG Thomas Weber GC-Team

7 years, 2 months

1
0
0 0

[PATCH] drm/i915/gvt: move intel_runtime_pm_get out of spin_lock in stop_schedule

by hang.yuan＠linux.intel.com

From: Hang Yuan <hang.yuan(a)linux.intel.com> pm_runtime_get_sync in intel_runtime_pm_get might sleep if i915 device is not active. When stop vgpu schedule, the device may be inactive. So need to move runtime_pm_get out of spin_lock/unlock. Fixes: b24881e0b0b6("drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio Cc: <stable(a)vger.kernel.org> Signed-off-by: Hang Yuan <hang.yuan(a)linux.intel.com> Signed-off-by: Xiong Zhang <xiong.y.zhang(a)intel.com> --- drivers/gpu/drm/i915/gvt/mmio_context.c | 2 -- drivers/gpu/drm/i915/gvt/sched_policy.c | 3 +++ 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/mmio_context.c b/drivers/gpu/drm/i915/gvt/mmio_context.c index 7e702c6..10e63ee 100644 --- a/drivers/gpu/drm/i915/gvt/mmio_context.c +++ b/drivers/gpu/drm/i915/gvt/mmio_context.c @@ -549,11 +549,9 @@ void intel_gvt_switch_mmio(struct intel_vgpu *pre, * performace for batch mmio read/write, so we need * handle forcewake mannually. */ - intel_runtime_pm_get(dev_priv); intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); switch_mmio(pre, next, ring_id); intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); - intel_runtime_pm_put(dev_priv); } /** diff --git a/drivers/gpu/drm/i915/gvt/sched_policy.c b/drivers/gpu/drm/i915/gvt/sched_policy.c index 09d7bb7..985fe81 100644 --- a/drivers/gpu/drm/i915/gvt/sched_policy.c +++ b/drivers/gpu/drm/i915/gvt/sched_policy.c @@ -426,6 +426,7 @@ void intel_vgpu_stop_schedule(struct intel_vgpu *vgpu) &vgpu->gvt->scheduler; int ring_id; struct vgpu_sched_data *vgpu_data = vgpu->sched_data; + struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv; if (!vgpu_data->active) return; @@ -444,6 +445,7 @@ void intel_vgpu_stop_schedule(struct intel_vgpu *vgpu) scheduler->current_vgpu = NULL; } + intel_runtime_pm_get(dev_priv); spin_lock_bh(&scheduler->mmio_context_lock); for (ring_id = 0; ring_id < I915_NUM_ENGINES; ring_id++) { if (scheduler->engine_owner[ring_id] == vgpu) { @@ -452,5 +454,6 @@ void intel_vgpu_stop_schedule(struct intel_vgpu *vgpu) } } spin_unlock_bh(&scheduler->mmio_context_lock); + intel_runtime_pm_put(dev_priv); mutex_unlock(&vgpu->gvt->sched_lock); } -- 2.7.4

7 years, 2 months

1
0
0 0

[PATCH] option: Do not try to bind to ADB interfaces

by Romain Izard

Some modems now use the Android Debug Bridge to provide a debugging interface, and some phones can also export serial ports managed by the "option" driver. The ADB daemon running in userspace tries to use USB interfaces with bDeviceClass=0xFF, bDeviceSubClass=0x42, bDeviceProtocol=1 Prevent the option driver from binding to those interfaces, as they will not be serial ports. This can fix issues like: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=781256 Signed-off-by: Romain Izard <romain.izard.pro(a)gmail.com> Cc: stable <stable(a)vger.kernel.org> --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 664e61f16b6a..f98943a57ff0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1987,6 +1987,12 @@ static int option_probe(struct usb_serial *serial, if (iface_desc->bInterfaceClass == USB_CLASS_MASS_STORAGE) return -ENODEV; + /* Do not bind Android Debug Bridge interfaces */ + if (iface_desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC && + iface_desc->bInterfaceSubClass == 0x42 && + iface_desc->bInterfaceProtocol == 1) + return -ENODEV; + /* * Don't bind reserved interfaces (like network ones) which often have * the same class/subclass/protocol as the serial interfaces. Look at -- 2.17.1

7 years, 2 months

5
7
0 0

[gregkh@linuxfoundation.org: Patch "drm: re-enable error handling" has been added to the 4.4-stable tree]

by Nicholas Mc Guire

Hi ! this is also the wrong version of the patch - the proper version is below. This has been posted to lkml https://lkml.org/lkml/2018/7/18/191 but there was no review yet - the version you have though is for sure broken. So maybe this should be simply dropped until the fix is confirmed thx! hofrat ----- Forwarded message from gregkh(a)linuxfoundation.org ----- Date: Tue, 28 Aug 2018 16:11:46 +0200 From: gregkh(a)linuxfoundation.org To: 1531571532-22733-1-git-send-email-hofrat(a)osadl.org, alexander.levin(a)microsoft.com, gregkh(a)linuxfoundation.org, hofrat(a)osadl.org, seanpaul(a)chromium.org Cc: stable-commits(a)vger.kernel.org Subject: Patch "drm: re-enable error handling" has been added to the 4.4-stable tree This is a note to let you know that I've just added the patch titled drm: re-enable error handling to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-re-enable-error-handling.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Aug 28 16:10:37 CEST 2018 From: Nicholas Mc Guire <hofrat(a)osadl.org> Date: Sat, 14 Jul 2018 14:32:12 +0200 Subject: drm: re-enable error handling From: Nicholas Mc Guire <hofrat(a)osadl.org> [ Upstream commit d530b5f1ca0bb66958a2b714bebe40a1248b9c15 ] drm_legacy_ctxbitmap_next() returns idr_alloc() which can return -ENOMEM, -EINVAL or -ENOSPC none of which are -1 . but the call sites of drm_legacy_ctxbitmap_next() seem to be assuming that the error case would be -1 (original return of drm_ctxbitmap_next() prior to 2.6.23 was actually -1). Thus reenable error handling by checking for < 0. Signed-off-by: Nicholas Mc Guire <hofrat(a)osadl.org> Fixes: 62968144e673 ("drm: convert drm context code to use Linux idr") Signed-off-by: Sean Paul <seanpaul(a)chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1531571532-22733-1-git-send-e… Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/drm_context.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpu/drm/drm_context.c +++ b/drivers/gpu/drm/drm_context.c @@ -372,7 +372,7 @@ int drm_legacy_addctx(struct drm_device ctx->handle = drm_legacy_ctxbitmap_next(dev); } DRM_DEBUG("%d\n", ctx->handle); - if (ctx->handle == -1) { + if (ctx->handle < 0) { DRM_DEBUG("Not enough free contexts.\n"); /* Should this return -EBUSY instead? */ return -ENOMEM; Patches currently in stable-queue which might be from hofrat(a)osadl.org are queue-4.4/drm-re-enable-error-handling.patch queue-4.4/can-mpc5xxx_can-check-of_iomap-return-before-use.patch ----- End forwarded message -----

7 years, 2 months

1
0
0 0

[PATCH] x86/speculation/l1tf: fix off-by-one error when warning that system has too much RAM

by Vlastimil Babka

Two users have reported [1] that they have an "extremely unlikely" system with more than MAX_PA/2 memory and L1TF mitigation is not effective. In fact it's a CPU with 36bits phys limit (64GB) and 32GB memory, but due to holes in the e820 map, the main region is almost 500MB over the 32GB limit: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable Suggestions to use 'mem=32G' to prefer L1TF mitigation while losing the 500MB revealed, that there's an off-by-one error in the check in l1tf_select_mitigation(). l1tf_pfn_limit() returns the last usable pfn (inclusive), but it's more common and hopefully less error-prone to return the first pfn that's over limit, so this patch changes that and updates the other callers. [1] https://bugzilla.suse.com/show_bug.cgi?id=1105536 Reported-by: George Anchev <studio(a)anchev.net> Reported-by: Christopher Snowhill <kode54(a)gmail.com> Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf") Cc: stable(a)vger.kernel.org Signed-off-by: Vlastimil Babka <vbabka(a)suse.cz> --- arch/x86/include/asm/processor.h | 2 +- arch/x86/mm/init.c | 2 +- arch/x86/mm/mmap.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index a0a52274cb4a..c24297268ebc 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -183,7 +183,7 @@ extern void cpu_detect(struct cpuinfo_x86 *c); static inline unsigned long long l1tf_pfn_limit(void) { - return BIT_ULL(boot_cpu_data.x86_phys_bits - 1 - PAGE_SHIFT) - 1; + return BIT_ULL(boot_cpu_data.x86_phys_bits - 1 - PAGE_SHIFT); } extern void early_cpu_init(void); diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 02de3d6065c4..63a6f9fcaf20 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -923,7 +923,7 @@ unsigned long max_swapfile_size(void) if (boot_cpu_has_bug(X86_BUG_L1TF)) { /* Limit the swap file size to MAX_PA/2 for L1TF workaround */ - unsigned long long l1tf_limit = l1tf_pfn_limit() + 1; + unsigned long long l1tf_limit = l1tf_pfn_limit(); /* * We encode swap offsets also with 3 bits below those for pfn * which makes the usable limit higher. diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c index f40ab8185d94..1e95d57760cf 100644 --- a/arch/x86/mm/mmap.c +++ b/arch/x86/mm/mmap.c @@ -257,7 +257,7 @@ bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot) /* If it's real memory always allow */ if (pfn_valid(pfn)) return true; - if (pfn > l1tf_pfn_limit() && !capable(CAP_SYS_ADMIN)) + if (pfn >= l1tf_pfn_limit() && !capable(CAP_SYS_ADMIN)) return false; return true; } -- 2.18.0

7 years, 2 months

7
20
0 0

perf/x86/intel/uncore: propose to support IIO free-running counters in 4.14

by Jin, Yao

Hi, The upstream kernel has supported IIO free-running counters on Skylake server. As of Skylake Server, there are a number of free running counters in each IIO Box that collect counts of per-box IO clocks and per-port Input/Output x BW/Utilization. There are three types of IIO free-running counters on Skylake server: 1. IO CLOCKS counter: a clock of IIO box. 2. BANDWIDTH counters: count inbound(PCIe->CPU)/outbound(CPU->PCIe) bandwidth. 3. UTILIZATION counters: count input/output utilization. With these IIO free-running counters, we can get good observation for IIO traffic on Skylake server. For example, we can see the IIO inbound bandwidth (PCIe->CPU). root@skx /sys/devices# perf stat -a -e uncore_iio_free_running_2/bw_in_port0/ ^C Performance counter stats for 'system wide': 153.19 MiB uncore_iio_free_running_2/bw_in_port0/ 8.037701069 seconds time elapsed I propose to backport the patches which support IIO free-running counters to 4.14 stable kernel. perf/x86/intel/uncore: Introduce customized event_read() for client IMC uncore 2da331465f44f9618abe8837d1a68405d550b66e perf/x86/intel/uncore: Add new data structures for free running counters 927b2deb067b8b4753fc09c7a42092f43fc0c1f6 perf/x86/intel/uncore: Add infrastructure for free running counters 0e0162dfcd1fbe4c711ee86f24f966c318999603 perf/x86/intel/uncore: Support IIO free-running counters on SKX 0f519f0352e37e7d71bdce5559517c74a35f6e33 perf/x86/intel/uncore: Expose uncore_pmu_event*() functions 5a6c9d94e9ed7410142bc6fcb638a4db1895aa0c perf/x86/intel/uncore: Clean up client IMC uncore 9aae1780e7e81e54edfb70ba33ead5b0b48be009 Thanks Jin Yao

7 years, 2 months

2
4
0 0

[PATCH v3] modules_install: make missing $DEPMOD a warning instead of an error

by Randy Dunlap

From: Randy Dunlap <rdunlap(a)infradead.org> When $DEPMOD is not found, only print a warning instead of exiting with an error message and error status. Warning: 'make modules_install' requires /sbin/depmod. Please install it. This is probably in the kmod package. Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Fixes: 934193a654c1 ("kbuild: verify that $DEPMOD is installed") Cc: stable(a)vger.kernel.org Cc: Lucas De Marchi <lucas.demarchi(a)profusion.mobi> Cc: Lucas De Marchi <lucas.de.marchi(a)gmail.com> Cc: Michal Marek <michal.lkml(a)markovi.net> Cc: Jessica Yu <jeyu(a)kernel.org> Cc: Chih-Wei Huang <cwhuang(a)linux.org.tw> Cc: H. Nikolaus Schaller <hns(a)goldelico.com> --- v2: add missing "exit 0" and update the commit message (no Error). v3: add Fixes: and Cc: stable scripts/depmod.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- lnx-418.orig/scripts/depmod.sh +++ lnx-418/scripts/depmod.sh @@ -15,9 +15,9 @@ if ! test -r System.map ; then fi if [ -z $(command -v $DEPMOD) ]; then - echo "'make modules_install' requires $DEPMOD. Please install it." >&2 + echo "Warning: 'make modules_install' requires $DEPMOD. Please install it." >&2 echo "This is probably in the kmod package." >&2 - exit 1 + exit 0 fi # older versions of depmod require the version string to start with three

7 years, 2 months

3
4
0 0

+ uapi-linux-keyctlh-dont-use-c-reserved-keyword-as-a-struct-member-name.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name has been added to the -mm tree. Its filename is uapi-linux-keyctlh-dont-use-c-reserved-keyword-as-a-struct-member-name.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/uapi-linux-keyctlh-dont-use-c-rese… and later at http://ozlabs.org/~akpm/mmotm/broken-out/uapi-linux-keyctlh-dont-use-c-rese… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Randy Dunlap <rdunlap(a)infradead.org> Subject: uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name Since this header is in "include/uapi/linux/", apparently people want to use it in userspace programs -- even in C++ ones. However, the header uses a C++ reserved keyword ("private"), so change that to "dh_private" instead to allow the header file to be used in C++ userspace. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=191051 Link: http://lkml.kernel.org/r/0db6c314-1ef4-9bfa-1baa-7214dd2ee061@infradead.org Fixes: ddbb41148724 ("KEYS: Add KEYCTL_DH_COMPUTE command") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Cc: David Howells <dhowells(a)redhat.com> Cc: James Morris <jmorris(a)namei.org> Cc: "Serge E. Hallyn" <serge(a)hallyn.com> Cc: Mat Martineau <mathew.j.martineau(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- include/uapi/linux/keyctl.h | 2 +- security/keys/dh.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) --- a/include/uapi/linux/keyctl.h~uapi-linux-keyctlh-dont-use-c-reserved-keyword-as-a-struct-member-name +++ a/include/uapi/linux/keyctl.h @@ -65,7 +65,7 @@ /* keyctl structures */ struct keyctl_dh_params { - __s32 private; + __s32 dh_private; __s32 prime; __s32 base; }; --- a/security/keys/dh.c~uapi-linux-keyctlh-dont-use-c-reserved-keyword-as-a-struct-member-name +++ a/security/keys/dh.c @@ -300,7 +300,7 @@ long __keyctl_dh_compute(struct keyctl_d } dh_inputs.g_size = dlen; - dlen = dh_data_from_key(pcopy.private, &dh_inputs.key); + dlen = dh_data_from_key(pcopy.dh_private, &dh_inputs.key); if (dlen < 0) { ret = dlen; goto out2; _ Patches currently in -mm which might be from rdunlap(a)infradead.org are uapi-linux-keyctlh-dont-use-c-reserved-keyword-as-a-struct-member-name.patch

7 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror