- Linux-stable-mirror - lists.linaro.org

[PATCH v2 0/3] mtd: rawnand: cadence: improvement and fixes

by niravkumar.l.rabara＠intel.com

From: Niravkumar L Rabara <niravkumar.l.rabara(a)intel.com> This patchset introduces improvements and fixes for cadence nand driver. The changes include: 1. Support deferred prob mechanism when DMA driver is not probed yet. 2. Map the slave DMA address using dma_map_resource. When ARM SMMU is enabled, using a direct physical address of SDMA results in DMA transaction failure. 3. Fixed the incorrect device context used for dma_unmap_single. v2 changes:- - Added the missing Fixes and Cc: stable tags to the patches. Niravkumar L Rabara (3): mtd: rawnand: cadence: support deferred prob when DMA is not ready mtd: rawnand: cadence: use dma_map_resource for sdma address mtd: rawnand: cadence: fix incorrect dev context in dma_unmap_single .../mtd/nand/raw/cadence-nand-controller.c | 35 +++++++++++++++---- 1 file changed, 28 insertions(+), 7 deletions(-) -- 2.25.1

2 weeks, 5 days

3
22
0 0

[PATCH v2] serial: 8250: Fix fifo underflow on flush

by John Keeping

When flushing the serial port's buffer, uart_flush_buffer() calls kfifo_reset() but if there is an outstanding DMA transfer then the completion function will consume data from the kfifo via uart_xmit_advance(), underflowing and leading to ongoing DMA as the driver tries to transmit another 2^32 bytes. This is readily reproduced with serial-generic and amidi sending even short messages as closing the device on exit will wait for the fifo to drain and in the underflow case amidi hangs for 30 seconds on exit in tty_wait_until_sent(). A trace of that gives: kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3 amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3 irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293 irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096 irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197 irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096 irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101 irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096 Since the port lock is held in when the kfifo is reset in uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer hook to adjust the outstanding DMA byte count is sufficient to avoid the kfifo underflow. Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Cc: stable(a)vger.kernel.org Signed-off-by: John Keeping <jkeeping(a)inmusicbrands.com> --- Changes in v2: - Add Fixes: tag - Return early to reduce indentation in serial8250_tx_dma_flush() drivers/tty/serial/8250/8250.h | 1 + drivers/tty/serial/8250/8250_dma.c | 16 ++++++++++++++++ drivers/tty/serial/8250/8250_port.c | 9 +++++++++ 3 files changed, 26 insertions(+) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 11e05aa014e54..8ef45622e4363 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -374,6 +374,7 @@ static inline int is_omap1510_8250(struct uart_8250_port *pt) #ifdef CONFIG_SERIAL_8250_DMA extern int serial8250_tx_dma(struct uart_8250_port *); +extern void serial8250_tx_dma_flush(struct uart_8250_port *); extern int serial8250_rx_dma(struct uart_8250_port *); extern void serial8250_rx_dma_flush(struct uart_8250_port *); extern int serial8250_request_dma(struct uart_8250_port *); diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index d215c494ee24c..f245a84f4a508 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -149,6 +149,22 @@ int serial8250_tx_dma(struct uart_8250_port *p) return ret; } +void serial8250_tx_dma_flush(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + if (!dma->tx_running) + return; + + /* + * kfifo_reset() has been called by the serial core, avoid + * advancing and underflowing in __dma_tx_complete(). + */ + dma->tx_size = 0; + + dmaengine_terminate_async(dma->rxchan); +} + int serial8250_rx_dma(struct uart_8250_port *p) { struct uart_8250_dma *dma = p->dma; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index d7976a21cca9c..442967a6cd52d 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2555,6 +2555,14 @@ static void serial8250_shutdown(struct uart_port *port) serial8250_do_shutdown(port); } +static void serial8250_flush_buffer(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + if (up->dma) + serial8250_tx_dma_flush(up); +} + static unsigned int serial8250_do_get_divisor(struct uart_port *port, unsigned int baud, unsigned int *frac) @@ -3244,6 +3252,7 @@ static const struct uart_ops serial8250_pops = { .break_ctl = serial8250_break_ctl, .startup = serial8250_startup, .shutdown = serial8250_shutdown, + .flush_buffer = serial8250_flush_buffer, .set_termios = serial8250_set_termios, .set_ldisc = serial8250_set_ldisc, .pm = serial8250_pm, -- 2.48.1

2 weeks, 6 days

2
1
0 0

[PATCH v3] arm64: Handle .ARM.attributes section in linker scripts

by Nathan Chancellor

A recent LLVM commit [1] started generating an .ARM.attributes section similar to the one that exists for 32-bit, which results in orphan section warnings (or errors if CONFIG_WERROR is enabled) from the linker because it is not handled in the arm64 linker scripts. ld.lld: error: arch/arm64/kernel/vdso/vgettimeofday.o:(.ARM.attributes) is being placed in '.ARM.attributes' ld.lld: error: arch/arm64/kernel/vdso/vgetrandom.o:(.ARM.attributes) is being placed in '.ARM.attributes' ld.lld: error: vmlinux.a(lib/vsprintf.o):(.ARM.attributes) is being placed in '.ARM.attributes' ld.lld: error: vmlinux.a(lib/win_minmax.o):(.ARM.attributes) is being placed in '.ARM.attributes' ld.lld: error: vmlinux.a(lib/xarray.o):(.ARM.attributes) is being placed in '.ARM.attributes' Discard the new sections in the necessary linker scripts to resolve the warnings, as the kernel and vDSO do not need to retain it, similar to the .note.gnu.property section. Cc: stable(a)vger.kernel.org Fixes: b3e5d80d0c48 ("arm64/build: Warn on orphan section placement") Link: https://github.com/llvm/llvm-project/commit/ee99c4d4845db66c4daa2373352133f… [1] Signed-off-by: Nathan Chancellor <nathan(a)kernel.org> --- Changes in v3: - Update location of section discard in vDSO to align with .note.gnu.property discard since the sectionss are similar in nature (Will). - Link to v2: https://lore.kernel.org/r/20250204-arm64-handle-arm-attributes-in-linker-sc… Changes in v2: - Discard the section instead of adding it to the final artifacts to mirror the .note.gnu.property section handling (Will). - Link to v1: https://lore.kernel.org/r/20250124-arm64-handle-arm-attributes-in-linker-sc… --- arch/arm64/kernel/vdso/vdso.lds.S | 1 + arch/arm64/kernel/vmlinux.lds.S | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm64/kernel/vdso/vdso.lds.S b/arch/arm64/kernel/vdso/vdso.lds.S index 4ec32e86a8da..47ad6944f9f0 100644 --- a/arch/arm64/kernel/vdso/vdso.lds.S +++ b/arch/arm64/kernel/vdso/vdso.lds.S @@ -41,6 +41,7 @@ SECTIONS */ /DISCARD/ : { *(.note.GNU-stack .note.gnu.property) + *(.ARM.attributes) } .note : { *(.note.*) } :text :note diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index f84c71f04d9e..e73326bd3ff7 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -162,6 +162,7 @@ SECTIONS /DISCARD/ : { *(.interp .dynamic) *(.dynsym .dynstr .hash .gnu.hash) + *(.ARM.attributes) } . = KIMAGE_VADDR; --- base-commit: 1dd3393696efba1598aa7692939bba99d0cffae3 change-id: 20250123-arm64-handle-arm-attributes-in-linker-script-82aee25313ac Best regards, -- Nathan Chancellor <nathan(a)kernel.org>

2 weeks, 6 days

2
1
0 0

[PATCH v1 13/16] mm: Don't skip arch_sync_kernel_mappings() in error paths

by Ryan Roberts

Fix callers that previously skipped calling arch_sync_kernel_mappings() if an error occurred during a pgtable update. The call is still required to sync any pgtable updates that may have occurred prior to hitting the error condition. These are theoretical bugs discovered during code review. Cc: <stable(a)vger.kernel.org> Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 0c95cba49255 ("mm: apply_to_pte_range warn and fail if a large pte is encountered") Signed-off-by: Ryan Roberts <ryan.roberts(a)arm.com> --- mm/memory.c | 6 ++++-- mm/vmalloc.c | 4 ++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index 539c0f7c6d54..a15f7dd500ea 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -3040,8 +3040,10 @@ static int __apply_to_page_range(struct mm_struct *mm, unsigned long addr, next = pgd_addr_end(addr, end); if (pgd_none(*pgd) && !create) continue; - if (WARN_ON_ONCE(pgd_leaf(*pgd))) - return -EINVAL; + if (WARN_ON_ONCE(pgd_leaf(*pgd))) { + err = -EINVAL; + break; + } if (!pgd_none(*pgd) && WARN_ON_ONCE(pgd_bad(*pgd))) { if (!create) continue; diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 6111ce900ec4..68950b1824d0 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -604,13 +604,13 @@ static int vmap_small_pages_range_noflush(unsigned long addr, unsigned long end, mask |= PGTBL_PGD_MODIFIED; err = vmap_pages_p4d_range(pgd, addr, next, prot, pages, &nr, &mask); if (err) - return err; + break; } while (pgd++, addr = next, addr != end); if (mask & ARCH_PAGE_TABLE_SYNC_MASK) arch_sync_kernel_mappings(start, end); - return 0; + return err; } /* -- 2.43.0

2 weeks, 6 days

2
1
0 0

[PATCH] pidfs: improve ioctl handling

by Christian Brauner

Pidfs supports extensible and non-extensible ioctls. The extensible ioctls need to check for the ioctl number itself not just the ioctl command otherwise both backward- and forward compatibility are broken. The pidfs ioctl handler also needs to look at the type of the ioctl command to guard against cases where "[...] a daemon receives some random file descriptor from a (potentially less privileged) client and expects the FD to be of some specific type, it might call ioctl() on this FD with some type-specific command and expect the call to fail if the FD is of the wrong type; but due to the missing type check, the kernel instead performs some action that userspace didn't expect." (cf. [1]] Reported-by: Jann Horn <jannh(a)google.com> Cc: stable(a)vger.kernel.org # v6.13 Fixes: https://lore.kernel.org/r/CAG48ez2K9A5GwtgqO31u9ZL292we8ZwAA=TJwwEv7wRuJ3j4… [1] Signed-off-by: Christian Brauner <brauner(a)kernel.org> --- Hey, Jann reported that the pidfs extensible ioctl checking has two issues: (1) We check for the ioctl command, not the number breaking forward and backward compatibility. (2) We don't verify the type encoded in the ioctl to guard against ioctl number collisions. This adresses both. Greg, when this patch (or a version thereof) lands upstream then it needs to please be backported to v6.13 together with the already upstream commit 8ce352818820 ("pidfs: check for valid ioctl commands"). Christian --- fs/pidfs.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/fs/pidfs.c b/fs/pidfs.c index 049352f973de..63f9699ebac3 100644 --- a/fs/pidfs.c +++ b/fs/pidfs.c @@ -287,7 +287,6 @@ static bool pidfs_ioctl_valid(unsigned int cmd) switch (cmd) { case FS_IOC_GETVERSION: case PIDFD_GET_CGROUP_NAMESPACE: - case PIDFD_GET_INFO: case PIDFD_GET_IPC_NAMESPACE: case PIDFD_GET_MNT_NAMESPACE: case PIDFD_GET_NET_NAMESPACE: @@ -300,6 +299,17 @@ static bool pidfs_ioctl_valid(unsigned int cmd) return true; } + /* Extensible ioctls require some more careful checks. */ + switch (_IOC_NR(cmd)) { + case _IOC_NR(PIDFD_GET_INFO): + /* + * Try to prevent performing a pidfd ioctl when someone + * erronously mistook the file descriptor for a pidfd. + * This is not perfect but will catch most cases. + */ + return (_IOC_TYPE(cmd) == _IOC_TYPE(PIDFD_GET_INFO)); + } + return false; } --- base-commit: 6470d2c6d4233a781c67f842d3c066bf1cfa4fdc change-id: 20250204-work-pidfs-ioctl-6ef79a65e36b

2 weeks, 6 days

4
4
0 0

[PATCH 4/4] batman-adv: Fix incorrect offset in batadv_tt_tvlv_ogm_handler_v1()

by Simon Wunderlich

From: Remi Pommarel <repk(a)triplefau.lt> Since commit 4436df478860 ("batman-adv: Add flex array to struct batadv_tvlv_tt_data"), the introduction of batadv_tvlv_tt_data's flex array member in batadv_tt_tvlv_ogm_handler_v1() put tt_changes at invalid offset. Those TT changes are supposed to be filled from the end of batadv_tvlv_tt_data structure (including vlan_data flexible array), but only the flex array size is taken into account missing completely the size of the fixed part of the structure itself. Fix the tt_change offset computation by using struct_size() instead of flex_array_size() so both flex array member and its container structure sizes are taken into account. Cc: stable(a)vger.kernel.org Fixes: 4436df478860 ("batman-adv: Add flex array to struct batadv_tvlv_tt_data") Signed-off-by: Remi Pommarel <repk(a)triplefau.lt> Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> --- net/batman-adv/translation-table.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 760d51fdbdf6..7d5de4cbb814 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -3959,23 +3959,21 @@ static void batadv_tt_tvlv_ogm_handler_v1(struct batadv_priv *bat_priv, struct batadv_tvlv_tt_change *tt_change; struct batadv_tvlv_tt_data *tt_data; u16 num_entries, num_vlan; - size_t flex_size; + size_t tt_data_sz; if (tvlv_value_len < sizeof(*tt_data)) return; tt_data = tvlv_value; - tvlv_value_len -= sizeof(*tt_data); - num_vlan = ntohs(tt_data->num_vlan); - flex_size = flex_array_size(tt_data, vlan_data, num_vlan); - if (tvlv_value_len < flex_size) + tt_data_sz = struct_size(tt_data, vlan_data, num_vlan); + if (tvlv_value_len < tt_data_sz) return; tt_change = (struct batadv_tvlv_tt_change *)((void *)tt_data - + flex_size); - tvlv_value_len -= flex_size; + + tt_data_sz); + tvlv_value_len -= tt_data_sz; num_entries = batadv_tt_entries(tvlv_value_len); -- 2.39.5

2 weeks, 6 days

1
0
0 0

[PATCH 3/4] batman-adv: Drop unmanaged ELP metric worker

by Simon Wunderlich

From: Sven Eckelmann <sven(a)narfation.org> The ELP worker needs to calculate new metric values for all neighbors "reachable" over an interface. Some of the used metric sources require locks which might need to sleep. This sleep is incompatible with the RCU list iterator used for the recorded neighbors. The initial approach to work around of this problem was to queue another work item per neighbor and then run this in a new context. Even when this solved the RCU vs might_sleep() conflict, it has a major problems: Nothing was stopping the work item in case it is not needed anymore - for example because one of the related interfaces was removed or the batman-adv module was unloaded - resulting in potential invalid memory accesses. Directly canceling the metric worker also has various problems: * cancel_work_sync for a to-be-deactivated interface is called with rtnl_lock held. But the code in the ELP metric worker also tries to use rtnl_lock() - which will never return in this case. This also means that cancel_work_sync would never return because it is waiting for the worker to finish. * iterating over the neighbor list for the to-be-deactivated interface is currently done using the RCU specific methods. Which means that it is possible to miss items when iterating over it without the associated spinlock - a behaviour which is acceptable for a periodic metric check but not for a cleanup routine (which must "stop" all still running workers) The better approch is to get rid of the per interface neighbor metric worker and handle everything in the interface worker. The original problems are solved by: * creating a list of neighbors which require new metric information inside the RCU protected context, gathering the metric according to the new list outside the RCU protected context * only use rcu_trylock inside metric gathering code to avoid a deadlock when the cancel_delayed_work_sync is called in the interface removal code (which is called with the rtnl_lock held) Cc: stable(a)vger.kernel.org Fixes: c833484e5f38 ("batman-adv: ELP - compute the metric based on the estimated throughput") Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> --- net/batman-adv/bat_v.c | 2 -- net/batman-adv/bat_v_elp.c | 71 ++++++++++++++++++++++++++------------ net/batman-adv/bat_v_elp.h | 2 -- net/batman-adv/types.h | 3 -- 4 files changed, 48 insertions(+), 30 deletions(-) diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c index ac11f1f08db0..d35479c465e2 100644 --- a/net/batman-adv/bat_v.c +++ b/net/batman-adv/bat_v.c @@ -113,8 +113,6 @@ static void batadv_v_hardif_neigh_init(struct batadv_hardif_neigh_node *hardif_neigh) { ewma_throughput_init(&hardif_neigh->bat_v.throughput); - INIT_WORK(&hardif_neigh->bat_v.metric_work, - batadv_v_elp_throughput_metric_update); } /** diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index 65e52de52bcd..b065578b4436 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -18,6 +18,7 @@ #include <linux/if_ether.h> #include <linux/jiffies.h> #include <linux/kref.h> +#include <linux/list.h> #include <linux/minmax.h> #include <linux/netdevice.h> #include <linux/nl80211.h> @@ -26,6 +27,7 @@ #include <linux/rcupdate.h> #include <linux/rtnetlink.h> #include <linux/skbuff.h> +#include <linux/slab.h> #include <linux/stddef.h> #include <linux/string.h> #include <linux/types.h> @@ -41,6 +43,18 @@ #include "routing.h" #include "send.h" +/** + * struct batadv_v_metric_queue_entry - list of hardif neighbors which require + * and metric update + */ +struct batadv_v_metric_queue_entry { + /** @hardif_neigh: hardif neighbor scheduled for metric update */ + struct batadv_hardif_neigh_node *hardif_neigh; + + /** @list: list node for metric_queue */ + struct list_head list; +}; + /** * batadv_v_elp_start_timer() - restart timer for ELP periodic work * @hard_iface: the interface for which the timer has to be reset @@ -137,10 +151,17 @@ static bool batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh, goto default_throughput; } + /* only use rtnl_trylock because the elp worker will be cancelled while + * the rntl_lock is held. the cancel_delayed_work_sync() would otherwise + * wait forever when the elp work_item was started and it is then also + * trying to rtnl_lock + */ + if (!rtnl_trylock()) + return false; + /* if not a wifi interface, check if this device provides data via * ethtool (e.g. an Ethernet adapter) */ - rtnl_lock(); ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings); rtnl_unlock(); if (ret == 0) { @@ -175,31 +196,19 @@ static bool batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh, /** * batadv_v_elp_throughput_metric_update() - worker updating the throughput * metric of a single hop neighbour - * @work: the work queue item + * @neigh: the neighbour to probe */ -void batadv_v_elp_throughput_metric_update(struct work_struct *work) +static void +batadv_v_elp_throughput_metric_update(struct batadv_hardif_neigh_node *neigh) { - struct batadv_hardif_neigh_node_bat_v *neigh_bat_v; - struct batadv_hardif_neigh_node *neigh; u32 throughput; bool valid; - neigh_bat_v = container_of(work, struct batadv_hardif_neigh_node_bat_v, - metric_work); - neigh = container_of(neigh_bat_v, struct batadv_hardif_neigh_node, - bat_v); - valid = batadv_v_elp_get_throughput(neigh, &throughput); if (!valid) - goto put_neigh; + return; ewma_throughput_add(&neigh->bat_v.throughput, throughput); - -put_neigh: - /* decrement refcounter to balance increment performed before scheduling - * this task - */ - batadv_hardif_neigh_put(neigh); } /** @@ -273,14 +282,16 @@ batadv_v_elp_wifi_neigh_probe(struct batadv_hardif_neigh_node *neigh) */ static void batadv_v_elp_periodic_work(struct work_struct *work) { + struct batadv_v_metric_queue_entry *metric_entry; + struct batadv_v_metric_queue_entry *metric_safe; struct batadv_hardif_neigh_node *hardif_neigh; struct batadv_hard_iface *hard_iface; struct batadv_hard_iface_bat_v *bat_v; struct batadv_elp_packet *elp_packet; + struct list_head metric_queue; struct batadv_priv *bat_priv; struct sk_buff *skb; u32 elp_interval; - bool ret; bat_v = container_of(work, struct batadv_hard_iface_bat_v, elp_wq.work); hard_iface = container_of(bat_v, struct batadv_hard_iface, bat_v); @@ -316,6 +327,8 @@ static void batadv_v_elp_periodic_work(struct work_struct *work) atomic_inc(&hard_iface->bat_v.elp_seqno); + INIT_LIST_HEAD(&metric_queue); + /* The throughput metric is updated on each sent packet. This way, if a * node is dead and no longer sends packets, batman-adv is still able to * react timely to its death. @@ -340,16 +353,28 @@ static void batadv_v_elp_periodic_work(struct work_struct *work) /* Reading the estimated throughput from cfg80211 is a task that * may sleep and that is not allowed in an rcu protected - * context. Therefore schedule a task for that. + * context. Therefore add it to metric_queue and process it + * outside rcu protected context. */ - ret = queue_work(batadv_event_workqueue, - &hardif_neigh->bat_v.metric_work); - - if (!ret) + metric_entry = kzalloc(sizeof(*metric_entry), GFP_ATOMIC); + if (!metric_entry) { batadv_hardif_neigh_put(hardif_neigh); + continue; + } + + metric_entry->hardif_neigh = hardif_neigh; + list_add(&metric_entry->list, &metric_queue); } rcu_read_unlock(); + list_for_each_entry_safe(metric_entry, metric_safe, &metric_queue, list) { + batadv_v_elp_throughput_metric_update(metric_entry->hardif_neigh); + + batadv_hardif_neigh_put(metric_entry->hardif_neigh); + list_del(&metric_entry->list); + kfree(metric_entry); + } + restart_timer: batadv_v_elp_start_timer(hard_iface); out: diff --git a/net/batman-adv/bat_v_elp.h b/net/batman-adv/bat_v_elp.h index 9e2740195fa2..c9cb0a307100 100644 --- a/net/batman-adv/bat_v_elp.h +++ b/net/batman-adv/bat_v_elp.h @@ -10,7 +10,6 @@ #include "main.h" #include <linux/skbuff.h> -#include <linux/workqueue.h> int batadv_v_elp_iface_enable(struct batadv_hard_iface *hard_iface); void batadv_v_elp_iface_disable(struct batadv_hard_iface *hard_iface); @@ -19,6 +18,5 @@ void batadv_v_elp_iface_activate(struct batadv_hard_iface *primary_iface, void batadv_v_elp_primary_iface_set(struct batadv_hard_iface *primary_iface); int batadv_v_elp_packet_recv(struct sk_buff *skb, struct batadv_hard_iface *if_incoming); -void batadv_v_elp_throughput_metric_update(struct work_struct *work); #endif /* _NET_BATMAN_ADV_BAT_V_ELP_H_ */ diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 04f6398b3a40..85a50096f5b2 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -596,9 +596,6 @@ struct batadv_hardif_neigh_node_bat_v { * neighbor */ unsigned long last_unicast_tx; - - /** @metric_work: work queue callback item for metric update */ - struct work_struct metric_work; }; /** -- 2.39.5

2 weeks, 6 days

1
0
0 0

[PATCH 2/4] batman-adv: Ignore neighbor throughput metrics in error case

by Simon Wunderlich

From: Sven Eckelmann <sven(a)narfation.org> If a temporary error happened in the evaluation of the neighbor throughput information, then the invalid throughput result should not be stored in the throughtput EWMA. Cc: stable(a)vger.kernel.org Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> --- net/batman-adv/bat_v_elp.c | 50 ++++++++++++++++++++++++++------------ 1 file changed, 34 insertions(+), 16 deletions(-) diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index fbf499bcc671..65e52de52bcd 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -59,11 +59,13 @@ static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface) /** * batadv_v_elp_get_throughput() - get the throughput towards a neighbour * @neigh: the neighbour for which the throughput has to be obtained + * @pthroughput: calculated throughput towards the given neighbour in multiples + * of 100kpbs (a value of '1' equals 0.1Mbps, '10' equals 1Mbps, etc). * - * Return: The throughput towards the given neighbour in multiples of 100kpbs - * (a value of '1' equals 0.1Mbps, '10' equals 1Mbps, etc). + * Return: true when value behind @pthroughput was set */ -static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) +static bool batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh, + u32 *pthroughput) { struct batadv_hard_iface *hard_iface = neigh->if_incoming; struct net_device *soft_iface = hard_iface->soft_iface; @@ -77,14 +79,16 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) * batman-adv interface */ if (!soft_iface) - return BATADV_THROUGHPUT_DEFAULT_VALUE; + return false; /* if the user specified a customised value for this interface, then * return it directly */ throughput = atomic_read(&hard_iface->bat_v.throughput_override); - if (throughput != 0) - return throughput; + if (throughput != 0) { + *pthroughput = throughput; + return true; + } /* if this is a wireless device, then ask its throughput through * cfg80211 API @@ -111,19 +115,24 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) * possible to delete this neighbor. For now set * the throughput metric to 0. */ - return 0; + *pthroughput = 0; + return true; } if (ret) goto default_throughput; - if (sinfo.filled & BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT)) - return sinfo.expected_throughput / 100; + if (sinfo.filled & BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT)) { + *pthroughput = sinfo.expected_throughput / 100; + return true; + } /* try to estimate the expected throughput based on reported tx * rates */ - if (sinfo.filled & BIT(NL80211_STA_INFO_TX_BITRATE)) - return cfg80211_calculate_bitrate(&sinfo.txrate) / 3; + if (sinfo.filled & BIT(NL80211_STA_INFO_TX_BITRATE)) { + *pthroughput = cfg80211_calculate_bitrate(&sinfo.txrate) / 3; + return true; + } goto default_throughput; } @@ -142,8 +151,10 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX; throughput = link_settings.base.speed; - if (throughput && throughput != SPEED_UNKNOWN) - return throughput * 10; + if (throughput && throughput != SPEED_UNKNOWN) { + *pthroughput = throughput * 10; + return true; + } } default_throughput: @@ -157,7 +168,8 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) } /* if none of the above cases apply, return the base_throughput */ - return BATADV_THROUGHPUT_DEFAULT_VALUE; + *pthroughput = BATADV_THROUGHPUT_DEFAULT_VALUE; + return true; } /** @@ -169,15 +181,21 @@ void batadv_v_elp_throughput_metric_update(struct work_struct *work) { struct batadv_hardif_neigh_node_bat_v *neigh_bat_v; struct batadv_hardif_neigh_node *neigh; + u32 throughput; + bool valid; neigh_bat_v = container_of(work, struct batadv_hardif_neigh_node_bat_v, metric_work); neigh = container_of(neigh_bat_v, struct batadv_hardif_neigh_node, bat_v); - ewma_throughput_add(&neigh->bat_v.throughput, - batadv_v_elp_get_throughput(neigh)); + valid = batadv_v_elp_get_throughput(neigh, &throughput); + if (!valid) + goto put_neigh; + + ewma_throughput_add(&neigh->bat_v.throughput, throughput); +put_neigh: /* decrement refcounter to balance increment performed before scheduling * this task */ -- 2.39.5

2 weeks, 6 days

1
0
0 0

[PATCH net-next 0/4] ptp: vmclock: bugfixes and cleanups for error handling

by Thomas Weißschuh

Some error handling issues I noticed while looking at the code. Only compile-tested. Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Thomas Weißschuh (4): ptp: vmclock: Set driver data before its usage ptp: vmclock: Don't unregister misc device if it was not registered ptp: vmclock: Clean up miscdev and ptp clock through devres ptp: vmclock: Remove goto-based cleanup logic drivers/ptp/ptp_vmclock.c | 46 ++++++++++++++++++++-------------------------- 1 file changed, 20 insertions(+), 26 deletions(-) --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250206-vmclock-probe-57cbcb770925 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

2 weeks, 6 days

4
9
0 0

[PATCH] fs/xattr: actually support O_PATH fds in *xattrat() syscalls

by Mike Yuan

Cited from commit message of original patch [1]: > One use case will be setfiles(8) setting SELinux file contexts > ("security.selinux") without race conditions and without a file > descriptor opened with read access requiring SELinux read permission. Also, generally all *at() syscalls operate on O_PATH fds, unlike f*() ones. Yet the O_PATH fds are rejected by *xattrat() syscalls in the final version merged into tree. Instead, let's switch things to CLASS(fd_raw). Note that there's one side effect: f*xattr() starts to work with O_PATH fds too. It's not clear to me whether this is desirable (e.g. fstat() accepts O_PATH fds as an outlier). [1] https://lore.kernel.org/all/20240426162042.191916-1-cgoettsche@seltendoof.d… Fixes: 6140be90ec70 ("fs/xattr: add *at family syscalls") Signed-off-by: Mike Yuan <me(a)yhndnzj.com> Cc: Al Viro <viro(a)zeniv.linux.org.uk> Cc: Christian Göttsche <cgzones(a)googlemail.com> Cc: Christian Brauner <brauner(a)kernel.org> Cc: <stable(a)vger.kernel.org> --- fs/xattr.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/xattr.c b/fs/xattr.c index 02bee149ad96..15df71e56187 100644 --- a/fs/xattr.c +++ b/fs/xattr.c @@ -704,7 +704,7 @@ static int path_setxattrat(int dfd, const char __user *pathname, filename = getname_maybe_null(pathname, at_flags); if (!filename) { - CLASS(fd, f)(dfd); + CLASS(fd_raw, f)(dfd); if (fd_empty(f)) error = -EBADF; else @@ -848,7 +848,7 @@ static ssize_t path_getxattrat(int dfd, const char __user *pathname, filename = getname_maybe_null(pathname, at_flags); if (!filename) { - CLASS(fd, f)(dfd); + CLASS(fd_raw, f)(dfd); if (fd_empty(f)) return -EBADF; return file_getxattr(fd_file(f), &ctx); @@ -978,7 +978,7 @@ static ssize_t path_listxattrat(int dfd, const char __user *pathname, filename = getname_maybe_null(pathname, at_flags); if (!filename) { - CLASS(fd, f)(dfd); + CLASS(fd_raw, f)(dfd); if (fd_empty(f)) return -EBADF; return file_listxattr(fd_file(f), list, size); @@ -1079,7 +1079,7 @@ static int path_removexattrat(int dfd, const char __user *pathname, filename = getname_maybe_null(pathname, at_flags); if (!filename) { - CLASS(fd, f)(dfd); + CLASS(fd_raw, f)(dfd); if (fd_empty(f)) return -EBADF; return file_removexattr(fd_file(f), &kname); base-commit: a86bf2283d2c9769205407e2b54777c03d012939 -- 2.48.1

2 weeks, 6 days

2
9
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror