- Linux-stable-mirror - lists.linaro.org

FAILED: patch "[PATCH] mm: fix __gup_device_huge vs unmap" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From a9b6de77b1a3ff729f7bfc54b2e17711776a416c Mon Sep 17 00:00:00 2001 From: Dan Williams <dan.j.williams(a)intel.com> Date: Thu, 19 Apr 2018 21:32:19 -0700 Subject: [PATCH] mm: fix __gup_device_huge vs unmap get_user_pages_fast() for device pages is missing the typical validation that all page references have been taken while the mapping was valid. Without this validation truncate operations can not reliably coordinate against new page reference events like O_DIRECT. Cc: <stable(a)vger.kernel.org> Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Reported-by: Jan Kara <jack(a)suse.cz> Reviewed-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> diff --git a/mm/gup.c b/mm/gup.c index 76af4cfeaf68..84dd2063ca3d 100644 --- a/mm/gup.c +++ b/mm/gup.c @@ -1456,32 +1456,48 @@ static int __gup_device_huge(unsigned long pfn, unsigned long addr, return 1; } -static int __gup_device_huge_pmd(pmd_t pmd, unsigned long addr, +static int __gup_device_huge_pmd(pmd_t orig, pmd_t *pmdp, unsigned long addr, unsigned long end, struct page **pages, int *nr) { unsigned long fault_pfn; + int nr_start = *nr; + + fault_pfn = pmd_pfn(orig) + ((addr & ~PMD_MASK) >> PAGE_SHIFT); + if (!__gup_device_huge(fault_pfn, addr, end, pages, nr)) + return 0; - fault_pfn = pmd_pfn(pmd) + ((addr & ~PMD_MASK) >> PAGE_SHIFT); - return __gup_device_huge(fault_pfn, addr, end, pages, nr); + if (unlikely(pmd_val(orig) != pmd_val(*pmdp))) { + undo_dev_pagemap(nr, nr_start, pages); + return 0; + } + return 1; } -static int __gup_device_huge_pud(pud_t pud, unsigned long addr, +static int __gup_device_huge_pud(pud_t orig, pud_t *pudp, unsigned long addr, unsigned long end, struct page **pages, int *nr) { unsigned long fault_pfn; + int nr_start = *nr; + + fault_pfn = pud_pfn(orig) + ((addr & ~PUD_MASK) >> PAGE_SHIFT); + if (!__gup_device_huge(fault_pfn, addr, end, pages, nr)) + return 0; - fault_pfn = pud_pfn(pud) + ((addr & ~PUD_MASK) >> PAGE_SHIFT); - return __gup_device_huge(fault_pfn, addr, end, pages, nr); + if (unlikely(pud_val(orig) != pud_val(*pudp))) { + undo_dev_pagemap(nr, nr_start, pages); + return 0; + } + return 1; } #else -static int __gup_device_huge_pmd(pmd_t pmd, unsigned long addr, +static int __gup_device_huge_pmd(pmd_t orig, pmd_t *pmdp, unsigned long addr, unsigned long end, struct page **pages, int *nr) { BUILD_BUG(); return 0; } -static int __gup_device_huge_pud(pud_t pud, unsigned long addr, +static int __gup_device_huge_pud(pud_t pud, pud_t *pudp, unsigned long addr, unsigned long end, struct page **pages, int *nr) { BUILD_BUG(); @@ -1499,7 +1515,7 @@ static int gup_huge_pmd(pmd_t orig, pmd_t *pmdp, unsigned long addr, return 0; if (pmd_devmap(orig)) - return __gup_device_huge_pmd(orig, addr, end, pages, nr); + return __gup_device_huge_pmd(orig, pmdp, addr, end, pages, nr); refs = 0; page = pmd_page(orig) + ((addr & ~PMD_MASK) >> PAGE_SHIFT); @@ -1537,7 +1553,7 @@ static int gup_huge_pud(pud_t orig, pud_t *pudp, unsigned long addr, return 0; if (pud_devmap(orig)) - return __gup_device_huge_pud(orig, addr, end, pages, nr); + return __gup_device_huge_pud(orig, pudp, addr, end, pages, nr); refs = 0; page = pud_page(orig) + ((addr & ~PUD_MASK) >> PAGE_SHIFT);

7 years, 4 months

1
0
0 0

[PATCH 4.9] iio:buffer: make length types match kfifo types

by Ben Hutchings

From: Martin Kelly <mkelly(a)xevo.com> commit c043ec1ca5baae63726aae32abbe003192bc6eec upstream. Currently, we use int for buffer length and bytes_per_datum. However, kfifo uses unsigned int for length and size_t for element size. We need to make sure these matches or we will have bugs related to overflow (in the range between INT_MAX and UINT_MAX for length, for example). In addition, set_bytes_per_datum uses size_t while bytes_per_datum is an int, which would cause bugs for large values of bytes_per_datum. Change buffer length to use unsigned int and bytes_per_datum to use size_t. Signed-off-by: Martin Kelly <mkelly(a)xevo.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> [bwh: Backported to 4.9: - Drop change to iio_dma_buffer_set_length() - Adjust filename, context] Signed-off-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> --- drivers/iio/buffer/kfifo_buf.c | 4 ++-- include/linux/iio/buffer.h | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/iio/buffer/kfifo_buf.c b/drivers/iio/buffer/kfifo_buf.c index 7ef9b13262a8..e44181f9eb36 100644 --- a/drivers/iio/buffer/kfifo_buf.c +++ b/drivers/iio/buffer/kfifo_buf.c @@ -19,7 +19,7 @@ struct iio_kfifo { #define iio_to_kfifo(r) container_of(r, struct iio_kfifo, buffer) static inline int __iio_allocate_kfifo(struct iio_kfifo *buf, - int bytes_per_datum, int length) + size_t bytes_per_datum, unsigned int length) { if ((length == 0) || (bytes_per_datum == 0)) return -EINVAL; @@ -71,7 +71,7 @@ static int iio_set_bytes_per_datum_kfifo(struct iio_buffer *r, size_t bpd) return 0; } -static int iio_set_length_kfifo(struct iio_buffer *r, int length) +static int iio_set_length_kfifo(struct iio_buffer *r, unsigned int length) { /* Avoid an invalid state */ if (length < 2) diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index 70a5164f4728..821965c90070 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -61,7 +61,7 @@ struct iio_buffer_access_funcs { int (*request_update)(struct iio_buffer *buffer); int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd); - int (*set_length)(struct iio_buffer *buffer, int length); + int (*set_length)(struct iio_buffer *buffer, unsigned int length); int (*enable)(struct iio_buffer *buffer, struct iio_dev *indio_dev); int (*disable)(struct iio_buffer *buffer, struct iio_dev *indio_dev); @@ -96,8 +96,8 @@ struct iio_buffer_access_funcs { * @watermark: [INTERN] number of datums to wait for poll/read. */ struct iio_buffer { - int length; - int bytes_per_datum; + unsigned int length; + size_t bytes_per_datum; struct attribute_group *scan_el_attrs; long *scan_mask; bool scan_timestamp; -- Ben Hutchings, Software Developer Codethink Ltd https://www.codethink.co.uk/ Dale House, 35 Dale Street Manchester, M1 2HF, United Kingdom

7 years, 4 months

2
1
0 0

FAILED: patch "[PATCH] iio: imu: inv_mpu6050: fix possible deadlock between mutex" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ca4c8fc97e669d7464a95e006d0ca4eadfa4e4bc Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol <jmaneyrol(a)invensense.com> Date: Mon, 30 Apr 2018 12:14:09 +0200 Subject: [PATCH] iio: imu: inv_mpu6050: fix possible deadlock between mutex and iio Detected by kernel circular locking dependency checker. We are locking iio mutex (iio_device_claim_direct_mode) after locking our internal mutex. But when the buffer starts, iio first locks its mutex and then we lock our internal one. To avoid possible deadlock, we need to use the same order everwhere. So we change the ordering by locking first iio mutex, then our internal mutex. Fixes: 68cd6e5b206b ("iio: imu: inv_mpu6050: fix lock issues by using our own mutex") Cc: stable(a)vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol(a)invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index aafa77766b08..7358935fb391 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -340,12 +340,9 @@ static int inv_mpu6050_read_channel_data(struct iio_dev *indio_dev, int result; int ret; - result = iio_device_claim_direct_mode(indio_dev); - if (result) - return result; result = inv_mpu6050_set_power_itg(st, true); if (result) - goto error_release; + return result; switch (chan->type) { case IIO_ANGL_VEL: @@ -386,14 +383,11 @@ static int inv_mpu6050_read_channel_data(struct iio_dev *indio_dev, result = inv_mpu6050_set_power_itg(st, false); if (result) goto error_power_off; - iio_device_release_direct_mode(indio_dev); return ret; error_power_off: inv_mpu6050_set_power_itg(st, false); -error_release: - iio_device_release_direct_mode(indio_dev); return result; } @@ -407,9 +401,13 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; mutex_lock(&st->lock); ret = inv_mpu6050_read_channel_data(indio_dev, chan, val); mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); return ret; case IIO_CHAN_INFO_SCALE: switch (chan->type) { @@ -532,17 +530,18 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, struct inv_mpu6050_state *st = iio_priv(indio_dev); int result; - mutex_lock(&st->lock); /* * we should only update scale when the chip is disabled, i.e. * not running */ result = iio_device_claim_direct_mode(indio_dev); if (result) - goto error_write_raw_unlock; + return result; + + mutex_lock(&st->lock); result = inv_mpu6050_set_power_itg(st, true); if (result) - goto error_write_raw_release; + goto error_write_raw_unlock; switch (mask) { case IIO_CHAN_INFO_SCALE: @@ -581,10 +580,9 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, } result |= inv_mpu6050_set_power_itg(st, false); -error_write_raw_release: - iio_device_release_direct_mode(indio_dev); error_write_raw_unlock: mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); return result; } @@ -643,17 +641,18 @@ inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr, fifo_rate > INV_MPU6050_MAX_FIFO_RATE) return -EINVAL; + result = iio_device_claim_direct_mode(indio_dev); + if (result) + return result; + mutex_lock(&st->lock); if (fifo_rate == st->chip_config.fifo_rate) { result = 0; goto fifo_rate_fail_unlock; } - result = iio_device_claim_direct_mode(indio_dev); - if (result) - goto fifo_rate_fail_unlock; result = inv_mpu6050_set_power_itg(st, true); if (result) - goto fifo_rate_fail_release; + goto fifo_rate_fail_unlock; d = INV_MPU6050_ONE_K_HZ / fifo_rate - 1; result = regmap_write(st->map, st->reg->sample_rate_div, d); @@ -667,10 +666,9 @@ inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr, fifo_rate_fail_power_off: result |= inv_mpu6050_set_power_itg(st, false); -fifo_rate_fail_release: - iio_device_release_direct_mode(indio_dev); fifo_rate_fail_unlock: mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); if (result) return result;

7 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] iio: imu: inv_mpu6050: fix possible deadlock between mutex" failed to apply to 4.17-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.17-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ca4c8fc97e669d7464a95e006d0ca4eadfa4e4bc Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol <jmaneyrol(a)invensense.com> Date: Mon, 30 Apr 2018 12:14:09 +0200 Subject: [PATCH] iio: imu: inv_mpu6050: fix possible deadlock between mutex and iio Detected by kernel circular locking dependency checker. We are locking iio mutex (iio_device_claim_direct_mode) after locking our internal mutex. But when the buffer starts, iio first locks its mutex and then we lock our internal one. To avoid possible deadlock, we need to use the same order everwhere. So we change the ordering by locking first iio mutex, then our internal mutex. Fixes: 68cd6e5b206b ("iio: imu: inv_mpu6050: fix lock issues by using our own mutex") Cc: stable(a)vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol(a)invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index aafa77766b08..7358935fb391 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -340,12 +340,9 @@ static int inv_mpu6050_read_channel_data(struct iio_dev *indio_dev, int result; int ret; - result = iio_device_claim_direct_mode(indio_dev); - if (result) - return result; result = inv_mpu6050_set_power_itg(st, true); if (result) - goto error_release; + return result; switch (chan->type) { case IIO_ANGL_VEL: @@ -386,14 +383,11 @@ static int inv_mpu6050_read_channel_data(struct iio_dev *indio_dev, result = inv_mpu6050_set_power_itg(st, false); if (result) goto error_power_off; - iio_device_release_direct_mode(indio_dev); return ret; error_power_off: inv_mpu6050_set_power_itg(st, false); -error_release: - iio_device_release_direct_mode(indio_dev); return result; } @@ -407,9 +401,13 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; mutex_lock(&st->lock); ret = inv_mpu6050_read_channel_data(indio_dev, chan, val); mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); return ret; case IIO_CHAN_INFO_SCALE: switch (chan->type) { @@ -532,17 +530,18 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, struct inv_mpu6050_state *st = iio_priv(indio_dev); int result; - mutex_lock(&st->lock); /* * we should only update scale when the chip is disabled, i.e. * not running */ result = iio_device_claim_direct_mode(indio_dev); if (result) - goto error_write_raw_unlock; + return result; + + mutex_lock(&st->lock); result = inv_mpu6050_set_power_itg(st, true); if (result) - goto error_write_raw_release; + goto error_write_raw_unlock; switch (mask) { case IIO_CHAN_INFO_SCALE: @@ -581,10 +580,9 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, } result |= inv_mpu6050_set_power_itg(st, false); -error_write_raw_release: - iio_device_release_direct_mode(indio_dev); error_write_raw_unlock: mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); return result; } @@ -643,17 +641,18 @@ inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr, fifo_rate > INV_MPU6050_MAX_FIFO_RATE) return -EINVAL; + result = iio_device_claim_direct_mode(indio_dev); + if (result) + return result; + mutex_lock(&st->lock); if (fifo_rate == st->chip_config.fifo_rate) { result = 0; goto fifo_rate_fail_unlock; } - result = iio_device_claim_direct_mode(indio_dev); - if (result) - goto fifo_rate_fail_unlock; result = inv_mpu6050_set_power_itg(st, true); if (result) - goto fifo_rate_fail_release; + goto fifo_rate_fail_unlock; d = INV_MPU6050_ONE_K_HZ / fifo_rate - 1; result = regmap_write(st->map, st->reg->sample_rate_div, d); @@ -667,10 +666,9 @@ inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr, fifo_rate_fail_power_off: result |= inv_mpu6050_set_power_itg(st, false); -fifo_rate_fail_release: - iio_device_release_direct_mode(indio_dev); fifo_rate_fail_unlock: mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); if (result) return result;

7 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] Btrfs: fix unexpected cow in run_delalloc_nocow" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 5811375325420052fcadd944792a416a43072b7f Mon Sep 17 00:00:00 2001 From: Liu Bo <bo.li.liu(a)oracle.com> Date: Wed, 31 Jan 2018 17:09:13 -0700 Subject: [PATCH] Btrfs: fix unexpected cow in run_delalloc_nocow Fstests generic/475 provides a way to fail metadata reads while checking if checksum exists for the inode inside run_delalloc_nocow(), and csum_exist_in_range() interprets error (-EIO) as inode having checksum and makes its caller enter the cow path. In case of free space inode, this ends up with a warning in cow_file_range(). The same problem applies to btrfs_cross_ref_exist() since it may also read metadata in between. With this, run_delalloc_nocow() bails out when errors occur at the two places. cc: <stable(a)vger.kernel.org> v2.6.28+ Fixes: 17d217fe970d ("Btrfs: fix nodatasum handling in balancing code") Signed-off-by: Liu Bo <bo.li.liu(a)oracle.com> Signed-off-by: David Sterba <dsterba(a)suse.com> diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 6504e63b2317..491a7397f6fa 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1256,6 +1256,8 @@ static noinline int csum_exist_in_range(struct btrfs_fs_info *fs_info, list_del(&sums->list); kfree(sums); } + if (ret < 0) + return ret; return 1; } @@ -1388,10 +1390,23 @@ static noinline int run_delalloc_nocow(struct inode *inode, goto out_check; if (btrfs_extent_readonly(fs_info, disk_bytenr)) goto out_check; - if (btrfs_cross_ref_exist(root, ino, - found_key.offset - - extent_offset, disk_bytenr)) + ret = btrfs_cross_ref_exist(root, ino, + found_key.offset - + extent_offset, disk_bytenr); + if (ret) { + /* + * ret could be -EIO if the above fails to read + * metadata. + */ + if (ret < 0) { + if (cow_start != (u64)-1) + cur_offset = cow_start; + goto error; + } + + WARN_ON_ONCE(nolock); goto out_check; + } disk_bytenr += extent_offset; disk_bytenr += cur_offset - found_key.offset; num_bytes = min(end + 1, extent_end) - cur_offset; @@ -1409,10 +1424,22 @@ static noinline int run_delalloc_nocow(struct inode *inode, * this ensure that csum for a given extent are * either valid or do not exist. */ - if (csum_exist_in_range(fs_info, disk_bytenr, - num_bytes)) { + ret = csum_exist_in_range(fs_info, disk_bytenr, + num_bytes); + if (ret) { if (!nolock) btrfs_end_write_no_snapshotting(root); + + /* + * ret could be -EIO if the above fails to read + * metadata. + */ + if (ret < 0) { + if (cow_start != (u64)-1) + cur_offset = cow_start; + goto error; + } + WARN_ON_ONCE(nolock); goto out_check; } if (!btrfs_inc_nocow_writers(fs_info, disk_bytenr)) {

7 years, 4 months

3
2
0 0

FAILED: patch "[PATCH] Btrfs: fix clone vs chattr NODATASUM race" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b5c40d598f5408bd0ca22dfffa82f03cd9433f23 Mon Sep 17 00:00:00 2001 From: Omar Sandoval <osandov(a)fb.com> Date: Tue, 22 May 2018 15:02:12 -0700 Subject: [PATCH] Btrfs: fix clone vs chattr NODATASUM race In btrfs_clone_files(), we must check the NODATASUM flag while the inodes are locked. Otherwise, it's possible that btrfs_ioctl_setflags() will change the flags after we check and we can end up with a party checksummed file. The race window is only a few instructions in size, between the if and the locks which is: 3834 if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode)) 3835 return -EISDIR; where the setflags must be run and toggle the NODATASUM flag (provided the file size is 0). The clone will block on the inode lock, segflags takes the inode lock, changes flags, releases log and clone continues. Not impossible but still needs a lot of bad luck to hit unintentionally. Fixes: 0e7b824c4ef9 ("Btrfs: don't make a file partly checksummed through file clone") CC: stable(a)vger.kernel.org # 4.4+ Signed-off-by: Omar Sandoval <osandov(a)fb.com> Reviewed-by: Nikolay Borisov <nborisov(a)suse.com> Reviewed-by: David Sterba <dsterba(a)suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba(a)suse.com> diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 743c4f1b8001..b9b779a4ab6e 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3808,11 +3808,6 @@ static noinline int btrfs_clone_files(struct file *file, struct file *file_src, src->i_sb != inode->i_sb) return -EXDEV; - /* don't make the dst file partly checksummed */ - if ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) != - (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)) - return -EINVAL; - if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode)) return -EISDIR; @@ -3822,6 +3817,13 @@ static noinline int btrfs_clone_files(struct file *file, struct file *file_src, inode_lock(src); } + /* don't make the dst file partly checksummed */ + if ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) != + (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)) { + ret = -EINVAL; + goto out_unlock; + } + /* determine range to clone */ ret = -EINVAL; if (off + len > src->i_size || off + len < off)

7 years, 4 months

3
2
0 0

FAILED: patch "[PATCH] cpufreq: intel_pstate: Fix scaling max/min limits with Turbo" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ff7c9917143b3a6cf2fa61212a32d67cf259bf9c Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada <srinivas.pandruvada(a)linux.intel.com> Date: Mon, 18 Jun 2018 12:47:45 -0700 Subject: [PATCH] cpufreq: intel_pstate: Fix scaling max/min limits with Turbo 3.0 When scaling max/min settings are changed, internally they are converted to a ratio using the max turbo 1 core turbo frequency. This works fine when 1 core max is same irrespective of the core. But under Turbo 3.0, this will not be the case. For example: Core 0: max turbo pstate: 43 (4.3GHz) Core 1: max turbo pstate: 45 (4.5GHz) In this case 1 core turbo ratio will be maximum of all, so it will be 45 (4.5GHz). Suppose scaling max is set to 4GHz (ratio 40) for all cores ,then on core one it will be = max_state * policy->max / max_freq; = 43 * (4000000/4500000) = 38 (3.8GHz) = 38 which is 200MHz less than the desired. On core2, it will be correctly set to ratio 40 (4GHz). Same holds true for scaling min frequency limit. So this requires usage of correct turbo max frequency for core one, which in this case is 4.3GHz. So we need to adjust per CPU cpu->pstate.turbo_freq using the maximum HWP ratio of that core. This change uses the HWP capability of a core to adjust max turbo frequency. But since Broadwell HWP doesn't use ratios in the HWP capabilities, we have to use legacy max 1 core turbo ratio. This is not a problem as the HWP capabilities don't differ among cores in Broadwell. We need to check for non Broadwell CPU model for applying this change, though. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada(a)linux.intel.com> Cc: 4.6+ <stable(a)vger.kernel.org> # 4.6+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 1de5ec8d5ea3..ece120da3353 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -294,6 +294,7 @@ struct pstate_funcs { static struct pstate_funcs pstate_funcs __read_mostly; static int hwp_active __read_mostly; +static int hwp_mode_bdw __read_mostly; static bool per_cpu_limits __read_mostly; static bool hwp_boost __read_mostly; @@ -1413,7 +1414,15 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) cpu->pstate.turbo_pstate = pstate_funcs.get_turbo(); cpu->pstate.scaling = pstate_funcs.get_scaling(); cpu->pstate.max_freq = cpu->pstate.max_pstate * cpu->pstate.scaling; - cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling; + + if (hwp_active && !hwp_mode_bdw) { + unsigned int phy_max, current_max; + + intel_pstate_get_hwp_max(cpu->cpu, &phy_max, &current_max); + cpu->pstate.turbo_freq = phy_max * cpu->pstate.scaling; + } else { + cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling; + } if (pstate_funcs.get_aperf_mperf_shift) cpu->aperf_mperf_shift = pstate_funcs.get_aperf_mperf_shift(); @@ -2467,28 +2476,36 @@ static inline bool intel_pstate_has_acpi_ppc(void) { return false; } static inline void intel_pstate_request_control_from_smm(void) {} #endif /* CONFIG_ACPI */ +#define INTEL_PSTATE_HWP_BROADWELL 0x01 + +#define ICPU_HWP(model, hwp_mode) \ + { X86_VENDOR_INTEL, 6, model, X86_FEATURE_HWP, hwp_mode } + static const struct x86_cpu_id hwp_support_ids[] __initconst = { - { X86_VENDOR_INTEL, 6, X86_MODEL_ANY, X86_FEATURE_HWP }, + ICPU_HWP(INTEL_FAM6_BROADWELL_X, INTEL_PSTATE_HWP_BROADWELL), + ICPU_HWP(INTEL_FAM6_BROADWELL_XEON_D, INTEL_PSTATE_HWP_BROADWELL), + ICPU_HWP(X86_MODEL_ANY, 0), {} }; static int __init intel_pstate_init(void) { + const struct x86_cpu_id *id; int rc; if (no_load) return -ENODEV; - if (x86_match_cpu(hwp_support_ids)) { + id = x86_match_cpu(hwp_support_ids); + if (id) { copy_cpu_funcs(&core_funcs); if (!no_hwp) { hwp_active++; + hwp_mode_bdw = id->driver_data; intel_pstate.attr = hwp_cpufreq_attrs; goto hwp_cpu_matched; } } else { - const struct x86_cpu_id *id; - id = x86_match_cpu(intel_pstate_cpu_ids); if (!id) return -ENODEV;

7 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] pinctrl: mt7622: fix a kernel panic when pio don't work as" failed to apply to 4.17-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.17-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 5f591543a937310e48baf0ee23680be09cdedfb8 Mon Sep 17 00:00:00 2001 From: Sean Wang <sean.wang(a)mediatek.com> Date: Thu, 14 Jun 2018 16:55:49 +0800 Subject: [PATCH] pinctrl: mt7622: fix a kernel panic when pio don't work as EINT controller The function, external interrupt controller, is made as an optional to mt7622 pinctrl. But if we don't want pio behaves as an external interrupt controller, it would lead to hw->eint not be created properly and then will cause 'kernel NULL pointer' issue when gpiochip try to call .to_irq or .set_config. To fix it, check hw->eint before accessing the member. [ 1.339494] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [ 1.347857] Mem abort info: [ 1.350742] ESR = 0x96000005 [ 1.353905] Exception class = DABT (current EL), IL = 32 bits [ 1.360024] SET = 0, FnV = 0 [ 1.363185] EA = 0, S1PTW = 0 [ 1.366431] Data abort info: [ 1.369405] ISV = 0, ISS = 0x00000005 [ 1.373363] CM = 0, WnR = 0 [ 1.376437] [0000000000000010] user address but active_mm is swapper [ 1.383005] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 1.388748] Modules linked in: [ 1.391897] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #344 [ 1.398625] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 1.404279] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 1.409221] pc : mtk_eint_find_irq+0x8/0x24 [ 1.413532] lr : mtk_gpio_to_irq+0x20/0x28 [ 1.417749] sp : ffffff800801baf0 [ 1.421161] x29: ffffff800801baf0 x28: ffffff8008792f40 [ 1.426637] x27: ffffff800886b000 x26: ffffff8008615620 [ 1.432113] x25: ffffffc00e4dbdc8 x24: ffffff80087b8000 [ 1.437589] x23: ffffffc00325a000 x22: ffffffc00325a010 [ 1.443066] x21: ffffffc0033dec18 x20: 00000000ffffffea [ 1.448542] x19: ffffffc00e4db800 x18: 0000000000000130 [ 1.454018] x17: 000000000000000e x16: 0000000000000007 [ 1.459494] x15: ffffff80085ee000 x14: 0000000000000001 [ 1.464970] x13: 0000000000000001 x12: 0000000000000010 [ 1.470446] x11: 0101010101010101 x10: 0000000000000880 [ 1.475922] x9 : ffffff800801b990 x8 : ffffffc0030688e0 [ 1.481399] x7 : ffffff80080c0660 x6 : ffffffc00e4dbbb0 [ 1.486875] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.492351] x3 : ffffff80082a92f4 x2 : 00000000fffffffa [ 1.497826] x1 : 0000000000000051 x0 : 0000000000000000 [ 1.503305] Process swapper/0 (pid: 1, stack limit = 0x0000000054e053bd) [ 1.510210] Call trace: [ 1.512727] mtk_eint_find_irq+0x8/0x24 [ 1.516677] mtk_gpio_to_irq+0x20/0x28 [ 1.520539] gpiod_to_irq+0x48/0x60 [ 1.524135] mmc_gpiod_request_cd_irq+0x3c/0xc4 [ 1.528804] mmc_start_host+0x6c/0x8c [ 1.532575] mmc_add_host+0x58/0x7c [ 1.536168] msdc_drv_probe+0x4fc/0x67c [ 1.540121] platform_drv_probe+0x58/0xa4 [ 1.544251] driver_probe_device+0x204/0x44c [ 1.548649] __driver_attach+0x84/0xf8 [ 1.552512] bus_for_each_dev+0x68/0xa0 [ 1.556461] driver_attach+0x20/0x28 [ 1.560142] bus_add_driver+0xec/0x240 [ 1.564002] driver_register+0x98/0xe4 [ 1.567863] __platform_driver_register+0x48/0x50 [ 1.572711] mt_msdc_driver_init+0x18/0x20 [ 1.576932] do_one_initcall+0x98/0x130 [ 1.580886] kernel_init_freeable+0x13c/0x1d4 [ 1.585375] kernel_init+0x10/0xf8 [ 1.588879] ret_from_fork+0x10/0x18 [ 1.592564] Code: a8c67bfd d65f03c0 a9bf7bfd 910003fd (f9400800) [ 1.598849] ---[ end trace 4bbcb7bc30e98492 ]--- [ 1.603677] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.603677] cc: Kevin Hilman <khilman(a)baylibre.com> Cc: stable(a)vger.kernel.org Fixes: e6dabd38d8e7 ("pinctrl: mediatek: add EINT support to MT7622 SoC") Signed-off-by: Sean Wang <sean.wang(a)mediatek.com> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index ad6da1184c9f..e3f1ab2290fc 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1459,6 +1459,9 @@ static int mtk_gpio_to_irq(struct gpio_chip *chip, unsigned int offset) struct mtk_pinctrl *hw = gpiochip_get_data(chip); unsigned long eint_n; + if (!hw->eint) + return -ENOTSUPP; + eint_n = offset; return mtk_eint_find_irq(hw->eint, eint_n); @@ -1471,7 +1474,8 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset, unsigned long eint_n; u32 debounce; - if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) + if (!hw->eint || + pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) return -ENOTSUPP; debounce = pinconf_to_config_argument(config);

7 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] pinctrl: samsung: Correct EINTG banks order" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 5cf9a338db94cfd570aa2607bef1b30996f188e3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pawe=C5=82=20Chmiel?= <pawel.mikolaj.chmiel(a)gmail.com> Date: Mon, 16 Apr 2018 17:52:45 +0200 Subject: [PATCH] pinctrl: samsung: Correct EINTG banks order MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All banks with GPIO interrupts should be at beginning of bank array and without any other types of banks between them. This order is expected by exynos_eint_gpio_irq, when doing interrupt group to bank translation. Otherwise, kernel NULL pointer dereference would happen when trying to handle interrupt, due to wrong bank being looked up. Observed on s5pv210, when trying to handle gpj0 interrupt, where kernel was mapping it to gpi bank. Cc: stable(a)vger.kernel.org Fixes: 023e06dfa688 ("pinctrl: exynos: add exynos5410 SoC specific data") Fixes: 608a26a7bc04 ("pinctrl: Add s5pv210 support to pinctrl-exynos) Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel(a)gmail.com> Reviewed-by: Tomasz Figa <tomasz.figa(a)gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c index 90c274490181..4f4ae66a0ee3 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c @@ -105,12 +105,12 @@ static const struct samsung_pin_bank_data s5pv210_pin_bank[] __initconst = { EXYNOS_PIN_BANK_EINTG(7, 0x1c0, "gpg1", 0x38), EXYNOS_PIN_BANK_EINTG(7, 0x1e0, "gpg2", 0x3c), EXYNOS_PIN_BANK_EINTG(7, 0x200, "gpg3", 0x40), - EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"), EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x44), EXYNOS_PIN_BANK_EINTG(6, 0x260, "gpj1", 0x48), EXYNOS_PIN_BANK_EINTG(8, 0x280, "gpj2", 0x4c), EXYNOS_PIN_BANK_EINTG(8, 0x2a0, "gpj3", 0x50), EXYNOS_PIN_BANK_EINTG(5, 0x2c0, "gpj4", 0x54), + EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"), EXYNOS_PIN_BANK_EINTN(8, 0x2e0, "mp01"), EXYNOS_PIN_BANK_EINTN(4, 0x300, "mp02"), EXYNOS_PIN_BANK_EINTN(8, 0x320, "mp03"), @@ -630,7 +630,6 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc3", 0x20), EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc1", 0x24), EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc2", 0x28), - EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"), EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x2c), EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpe0", 0x30), EXYNOS_PIN_BANK_EINTG(2, 0x1C0, "gpe1", 0x34), @@ -641,6 +640,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = EXYNOS_PIN_BANK_EINTG(2, 0x260, "gpg2", 0x48), EXYNOS_PIN_BANK_EINTG(4, 0x280, "gph0", 0x4c), EXYNOS_PIN_BANK_EINTG(8, 0x2A0, "gph1", 0x50), + EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"), EXYNOS_PIN_BANK_EINTN(8, 0x2C0, "gpm7"), EXYNOS_PIN_BANK_EINTN(6, 0x2E0, "gpy0"), EXYNOS_PIN_BANK_EINTN(4, 0x300, "gpy1"),

7 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] printk: fix possible reuse of va_list variable" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 988a35f8da1dec5a8cd2788054d1e717be61bf25 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> Date: Fri, 11 May 2018 19:54:19 +0900 Subject: [PATCH] printk: fix possible reuse of va_list variable I noticed that there is a possibility that printk_safe_log_store() causes kernel oops because "args" parameter is passed to vsnprintf() again when atomic_cmpxchg() detected that we raced. Fix this by using va_copy(). Link: http://lkml.kernel.org/r/201805112002.GIF21216.OFVHFOMLJtQFSO@I-love.SAKURA… Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: dvyukov(a)google.com Cc: syzkaller(a)googlegroups.com Cc: fengguang.wu(a)intel.com Cc: linux-kernel(a)vger.kernel.org Signed-off-by: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> Fixes: 42a0bb3f71383b45 ("printk/nmi: generic solution for safe printk in NMI") Cc: 4.7+ <stable(a)vger.kernel.org> # v4.7+ Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky(a)gmail.com> Signed-off-by: Petr Mladek <pmladek(a)suse.com> diff --git a/kernel/printk/printk_safe.c b/kernel/printk/printk_safe.c index 3e3c2004bb23..449d67edfa4b 100644 --- a/kernel/printk/printk_safe.c +++ b/kernel/printk/printk_safe.c @@ -82,6 +82,7 @@ static __printf(2, 0) int printk_safe_log_store(struct printk_safe_seq_buf *s, { int add; size_t len; + va_list ap; again: len = atomic_read(&s->len); @@ -100,7 +101,9 @@ static __printf(2, 0) int printk_safe_log_store(struct printk_safe_seq_buf *s, if (!len) smp_rmb(); - add = vscnprintf(s->buffer + len, sizeof(s->buffer) - len, fmt, args); + va_copy(ap, args); + add = vscnprintf(s->buffer + len, sizeof(s->buffer) - len, fmt, ap); + va_end(ap); if (!add) return 0;

7 years, 4 months

4
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror