- Linux-stable-mirror - lists.linaro.org

[PATCH v3 1/7] vmw_balloon: fix inflation of 64-bit GFNs

by Nadav Amit

When balloon batching is not supported by the hypervisor, the guest frame number (GFN) must fit in 32-bit. However, due to a bug, this check was mistakenly ignored. In practice, when total RAM is greater than 16TB, the balloon does not work currently, making this bug unlikely to happen. Fixes: ef0f8f112984 ("VMware balloon: partially inline vmballoon_reserve_page.") Cc: stable(a)vger.kernel.org Reviewed-by: Xavier Deguillard <xdeguillard(a)vmware.com> Signed-off-by: Nadav Amit <namit(a)vmware.com> --- drivers/misc/vmw_balloon.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c index efd733472a35..28e77ab1e136 100644 --- a/drivers/misc/vmw_balloon.c +++ b/drivers/misc/vmw_balloon.c @@ -450,7 +450,7 @@ static int vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn, pfn32 = (u32)pfn; if (pfn32 != pfn) - return -1; + return -EINVAL; STATS_INC(b->stats.lock[false]); @@ -460,7 +460,7 @@ static int vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn, pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status); STATS_INC(b->stats.lock_fail[false]); - return 1; + return -EIO; } static int vmballoon_send_batched_lock(struct vmballoon *b, @@ -597,11 +597,12 @@ static int vmballoon_lock_page(struct vmballoon *b, unsigned int num_pages, locked = vmballoon_send_lock_page(b, page_to_pfn(page), &hv_status, target); - if (locked > 0) { + if (locked) { STATS_INC(b->stats.refused_alloc[false]); - if (hv_status == VMW_BALLOON_ERROR_RESET || - hv_status == VMW_BALLOON_ERROR_PPN_NOTNEEDED) { + if (locked == -EIO && + (hv_status == VMW_BALLOON_ERROR_RESET || + hv_status == VMW_BALLOON_ERROR_PPN_NOTNEEDED)) { vmballoon_free_page(page, false); return -EIO; } @@ -617,7 +618,7 @@ static int vmballoon_lock_page(struct vmballoon *b, unsigned int num_pages, } else { vmballoon_free_page(page, false); } - return -EIO; + return locked; } /* track allocated page */ -- 2.17.0

7 years, 4 months

1
0
0 0

+ slub-fix-__kmem_cache_empty-for-config_slub_debug.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: slub: fix __kmem_cache_empty for !CONFIG_SLUB_DEBUG has been added to the -mm tree. Its filename is slub-fix-__kmem_cache_empty-for-config_slub_debug.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/slub-fix-__kmem_cache_empty-for-co… and later at http://ozlabs.org/~akpm/mmotm/broken-out/slub-fix-__kmem_cache_empty-for-co… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Shakeel Butt <shakeelb(a)google.com> Subject: slub: fix __kmem_cache_empty for !CONFIG_SLUB_DEBUG f9e13c0a5a33 ("slab, slub: skip unnecessary kasan_cache_shutdown()") causes crashes when using slub, as described at http://lkml.kernel.org/r/CAHmME9rtoPwxUSnktxzKso14iuVCWT7BE_-_8PAC=pGw1iJnQ… For !CONFIG_SLUB_DEBUG, SLUB does not maintain the number of slabs allocated per node for a kmem_cache. Thus, slabs_node() in __kmem_cache_empty() will always return 0. So, in such situation, it is required to check per-cpu slabs to make sure if a kmem_cache is empty or not. Please note that __kmem_cache_shutdown() and __kmem_cache_shrink() are not affected by !CONFIG_SLUB_DEBUG as they call flush_all() to clear per-cpu slabs. Link: http://lkml.kernel.org/r/20180619213352.71740-1-shakeelb@google.com Link: http://lkml.kernel.org/r/CAHmME9rtoPwxUSnktxzKso14iuVCWT7BE_-_8PAC=pGw1iJnQ… Fixes: f9e13c0a5a33 ("slab, slub: skip unnecessary kasan_cache_shutdown()") Signed-off-by: Shakeel Butt <shakeelb(a)google.com> Reported-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Tested-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Cc: Christoph Lameter <cl(a)linux.com> Cc: Pekka Enberg <penberg(a)kernel.org> Cc: David Rientjes <rientjes(a)google.com> Cc: Joonsoo Kim <iamjoonsoo.kim(a)lge.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/slub.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff -puN mm/slub.c~slub-fix-__kmem_cache_empty-for-config_slub_debug mm/slub.c --- a/mm/slub.c~slub-fix-__kmem_cache_empty-for-config_slub_debug +++ a/mm/slub.c @@ -3673,9 +3673,23 @@ static void free_partial(struct kmem_cac bool __kmem_cache_empty(struct kmem_cache *s) { - int node; + int cpu, node; struct kmem_cache_node *n; + /* + * slabs_node will always be 0 for !CONFIG_SLUB_DEBUG. So, manually + * check slabs for all cpus. + */ + if (!IS_ENABLED(CONFIG_SLUB_DEBUG)) { + for_each_online_cpu(cpu) { + struct kmem_cache_cpu *c; + + c = per_cpu_ptr(s->cpu_slab, cpu); + if (c->page || slub_percpu_partial(c)) + return false; + } + } + for_each_kmem_cache_node(s, node, n) if (n->nr_partial || slabs_node(s, node)) return false; _ Patches currently in -mm which might be from shakeelb(a)google.com are slub-fix-__kmem_cache_empty-for-config_slub_debug.patch

7 years, 4 months

1
0
0 0

[to-be-updated] mm-devm_memremap_pages-handle-errors-allocating-final-devres-action.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: mm, devm_memremap_pages: handle errors allocating final devres action has been removed from the -mm tree. Its filename was mm-devm_memremap_pages-handle-errors-allocating-final-devres-action.patch This patch was dropped because an updated version will be merged ------------------------------------------------------ From: Dan Williams <dan.j.williams(a)intel.com> Subject: mm, devm_memremap_pages: handle errors allocating final devres action The last step before devm_memremap_pages() returns success is to allocate a release action to tear the entire setup down. However, the result from devm_add_action() is not checked. Checking the error also means that we need to handle the fact that the percpu_ref may not be killed by the time devm_memremap_pages_release() runs. Add a new state flag for this case. Without this change we could fail to register the teardown of devm_memremap_pages(). The likelihood of hitting this failure is tiny as small memory allocations almost always succeed. However, the impact of the failure is large given any future reconfiguration, or disable/enable, of an nvdimm namespace will fail forever as subsequent calls to devm_memremap_pages() will fail to setup the pgmap_radix since there will be stale entries for the physical address range. Link: http://lkml.kernel.org/r/152694212460.5484.13180030631810166467.stgit@dwill… Fixes: e8d513483300 ("memremap: change devm_memremap_pages interface...") Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Cc: "Jérôme Glisse" <jglisse(a)redhat.com> Cc: Logan Gunthorpe <logang(a)deltatee.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- include/linux/memremap.h | 1 + kernel/memremap.c | 8 ++++++-- 2 files changed, 7 insertions(+), 2 deletions(-) diff -puN include/linux/memremap.h~mm-devm_memremap_pages-handle-errors-allocating-final-devres-action include/linux/memremap.h --- a/include/linux/memremap.h~mm-devm_memremap_pages-handle-errors-allocating-final-devres-action +++ a/include/linux/memremap.h @@ -115,6 +115,7 @@ struct dev_pagemap { dev_page_free_t page_free; struct vmem_altmap altmap; bool altmap_valid; + bool registered; struct resource res; struct percpu_ref *ref; struct device *dev; diff -puN kernel/memremap.c~mm-devm_memremap_pages-handle-errors-allocating-final-devres-action kernel/memremap.c --- a/kernel/memremap.c~mm-devm_memremap_pages-handle-errors-allocating-final-devres-action +++ a/kernel/memremap.c @@ -124,7 +124,7 @@ static void devm_memremap_pages_release( for_each_device_pfn(pfn, pgmap) put_page(pfn_to_page(pfn)); - if (percpu_ref_tryget_live(pgmap->ref)) { + if (pgmap->registered && percpu_ref_tryget_live(pgmap->ref)) { dev_WARN(dev, "%s: page mapping is still live!\n", __func__); percpu_ref_put(pgmap->ref); } @@ -246,7 +246,11 @@ void *devm_memremap_pages(struct device percpu_ref_get(pgmap->ref); } - devm_add_action(dev, devm_memremap_pages_release, pgmap); + error = devm_add_action_or_reset(dev, devm_memremap_pages_release, + pgmap); + if (error) + return ERR_PTR(error); + pgmap->registered = true; return __va(res->start); _ Patches currently in -mm which might be from dan.j.williams(a)intel.com are mm-hmm-use-devm-semantics-for-hmm_devmem_add-remove.patch mm-hmm-replace-hmm_devmem_pages_create-with-devm_memremap_pages.patch mm-hmm-mark-hmm_devmem_add-add_resource-export_symbol_gpl.patch

7 years, 4 months

1
0
0 0

[PATCH 4.4 1/2] Revert "Btrfs: fix scrub to repair raid6 corruption"

by Sasha Levin

This reverts commit 95b286daf7ba784191023ad110122703eb2ebabc. This commit used an incorrect log message. Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- fs/btrfs/raid56.c | 18 ++++-------------- fs/btrfs/volumes.c | 9 +-------- 2 files changed, 5 insertions(+), 22 deletions(-) diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c index b9fa99577bf7..1a33d3eb36de 100644 --- a/fs/btrfs/raid56.c +++ b/fs/btrfs/raid56.c @@ -2160,21 +2160,11 @@ int raid56_parity_recover(struct btrfs_root *root, struct bio *bio, } /* - * Loop retry: - * for 'mirror == 2', reconstruct from all other stripes. - * for 'mirror_num > 2', select a stripe to fail on every retry. + * reconstruct from the q stripe if they are + * asking for mirror 3 */ - if (mirror_num > 2) { - /* - * 'mirror == 3' is to fail the p stripe and - * reconstruct from the q stripe. 'mirror > 3' is to - * fail a data stripe and reconstruct from p+q stripe. - */ - rbio->failb = rbio->real_stripes - (mirror_num - 1); - ASSERT(rbio->failb > 0); - if (rbio->failb <= rbio->faila) - rbio->failb--; - } + if (mirror_num == 3) + rbio->failb = rbio->real_stripes - 2; ret = lock_stripe_add(rbio); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index b4d63a9842fa..ed75d70b4bc2 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -5056,14 +5056,7 @@ int btrfs_num_copies(struct btrfs_fs_info *fs_info, u64 logical, u64 len) else if (map->type & BTRFS_BLOCK_GROUP_RAID5) ret = 2; else if (map->type & BTRFS_BLOCK_GROUP_RAID6) - /* - * There could be two corrupted data stripes, we need - * to loop retry in order to rebuild the correct data. - * - * Fail a stripe at a time on every retry except the - * stripe under reconstruction. - */ - ret = map->num_stripes; + ret = 3; else ret = 1; free_extent_map(em); -- 2.17.1

7 years, 4 months

2
5
0 0

[PATCH 4.4 1/2] Revert "Btrfs: fix scrub to repair raid6 corruption"

by Sasha Levin

This reverts commit 95b286daf7ba784191023ad110122703eb2ebabc. This commit used an incorrect log message. Reported-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- fs/btrfs/raid56.c | 18 ++++-------------- fs/btrfs/volumes.c | 9 +-------- 2 files changed, 5 insertions(+), 22 deletions(-) diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c index b9fa99577bf7..1a33d3eb36de 100644 --- a/fs/btrfs/raid56.c +++ b/fs/btrfs/raid56.c @@ -2160,21 +2160,11 @@ int raid56_parity_recover(struct btrfs_root *root, struct bio *bio, } /* - * Loop retry: - * for 'mirror == 2', reconstruct from all other stripes. - * for 'mirror_num > 2', select a stripe to fail on every retry. + * reconstruct from the q stripe if they are + * asking for mirror 3 */ - if (mirror_num > 2) { - /* - * 'mirror == 3' is to fail the p stripe and - * reconstruct from the q stripe. 'mirror > 3' is to - * fail a data stripe and reconstruct from p+q stripe. - */ - rbio->failb = rbio->real_stripes - (mirror_num - 1); - ASSERT(rbio->failb > 0); - if (rbio->failb <= rbio->faila) - rbio->failb--; - } + if (mirror_num == 3) + rbio->failb = rbio->real_stripes - 2; ret = lock_stripe_add(rbio); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index b4d63a9842fa..ed75d70b4bc2 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -5056,14 +5056,7 @@ int btrfs_num_copies(struct btrfs_fs_info *fs_info, u64 logical, u64 len) else if (map->type & BTRFS_BLOCK_GROUP_RAID5) ret = 2; else if (map->type & BTRFS_BLOCK_GROUP_RAID6) - /* - * There could be two corrupted data stripes, we need - * to loop retry in order to rebuild the correct data. - * - * Fail a stripe at a time on every retry except the - * stripe under reconstruction. - */ - ret = map->num_stripes; + ret = 3; else ret = 1; free_extent_map(em); -- 2.17.1

7 years, 4 months

1
1
0 0

[PATCH 4.9 1/2] Revert "Btrfs: fix scrub to repair raid6 corruption"

by Sasha Levin

This reverts commit 186a6519dc94964a4c5c68fca482f20f71551f26. This commit used an incorrect log message. Reported-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- fs/btrfs/raid56.c | 18 ++++-------------- fs/btrfs/volumes.c | 9 +-------- 2 files changed, 5 insertions(+), 22 deletions(-) diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c index af6a776fa18c..d016d4a79864 100644 --- a/fs/btrfs/raid56.c +++ b/fs/btrfs/raid56.c @@ -2161,21 +2161,11 @@ int raid56_parity_recover(struct btrfs_root *root, struct bio *bio, } /* - * Loop retry: - * for 'mirror == 2', reconstruct from all other stripes. - * for 'mirror_num > 2', select a stripe to fail on every retry. + * reconstruct from the q stripe if they are + * asking for mirror 3 */ - if (mirror_num > 2) { - /* - * 'mirror == 3' is to fail the p stripe and - * reconstruct from the q stripe. 'mirror > 3' is to - * fail a data stripe and reconstruct from p+q stripe. - */ - rbio->failb = rbio->real_stripes - (mirror_num - 1); - ASSERT(rbio->failb > 0); - if (rbio->failb <= rbio->faila) - rbio->failb--; - } + if (mirror_num == 3) + rbio->failb = rbio->real_stripes - 2; ret = lock_stripe_add(rbio); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 76017e1b3c0f..c2495cde26f6 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -5186,14 +5186,7 @@ int btrfs_num_copies(struct btrfs_fs_info *fs_info, u64 logical, u64 len) else if (map->type & BTRFS_BLOCK_GROUP_RAID5) ret = 2; else if (map->type & BTRFS_BLOCK_GROUP_RAID6) - /* - * There could be two corrupted data stripes, we need - * to loop retry in order to rebuild the correct data. - * - * Fail a stripe at a time on every retry except the - * stripe under reconstruction. - */ - ret = map->num_stripes; + ret = 3; else ret = 1; free_extent_map(em); -- 2.17.1

7 years, 4 months

1
1
0 0

[PATCH 4.14 1/3] Revert "Btrfs: fix scrub to repair raid6 corruption"

by Sasha Levin

This reverts commit d91bb7c6988bd6450284c762b33f2e1ea3fe7c97. This commit used an incorrect log message. Reported-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- fs/btrfs/raid56.c | 18 ++++-------------- fs/btrfs/volumes.c | 9 +-------- 2 files changed, 5 insertions(+), 22 deletions(-) diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c index 2e995e565633..d1bda68a3386 100644 --- a/fs/btrfs/raid56.c +++ b/fs/btrfs/raid56.c @@ -2172,21 +2172,11 @@ int raid56_parity_recover(struct btrfs_fs_info *fs_info, struct bio *bio, } /* - * Loop retry: - * for 'mirror == 2', reconstruct from all other stripes. - * for 'mirror_num > 2', select a stripe to fail on every retry. + * reconstruct from the q stripe if they are + * asking for mirror 3 */ - if (mirror_num > 2) { - /* - * 'mirror == 3' is to fail the p stripe and - * reconstruct from the q stripe. 'mirror > 3' is to - * fail a data stripe and reconstruct from p+q stripe. - */ - rbio->failb = rbio->real_stripes - (mirror_num - 1); - ASSERT(rbio->failb > 0); - if (rbio->failb <= rbio->faila) - rbio->failb--; - } + if (mirror_num == 3) + rbio->failb = rbio->real_stripes - 2; ret = lock_stripe_add(rbio); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 08afafb6ecf7..69bc37a87c5a 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -5110,14 +5110,7 @@ int btrfs_num_copies(struct btrfs_fs_info *fs_info, u64 logical, u64 len) else if (map->type & BTRFS_BLOCK_GROUP_RAID5) ret = 2; else if (map->type & BTRFS_BLOCK_GROUP_RAID6) - /* - * There could be two corrupted data stripes, we need - * to loop retry in order to rebuild the correct data. - * - * Fail a stripe at a time on every retry except the - * stripe under reconstruction. - */ - ret = map->num_stripes; + ret = 3; else ret = 1; free_extent_map(em); -- 2.17.1

7 years, 4 months

1
2
0 0

[PATCH] Input elan_i2c_smbus - Fix more potential stack buffer overflows

by Ben Hutchings

Commit 40f7090bb1b4 ("Input: elan_i2c_smbus - fix corrupted stack") fixed most of the functions using i2c_smbus_read_block_data() to allocate a buffer with the maximum block size. However three functions were left unchanged: * In elan_smbus_initialize(), increase the buffer size in the same way. * In elan_smbus_calibrate_result(), the buffer is provided by the caller (calibrate_store()), so introduce a bounce buffer. Also name the result buffer size. * In elan_smbus_get_report(), the buffer is provided by the caller but happens to be the right length. Add a compile-time assertion to ensure this remains the case. Cc: <stable(a)vger.kernel.org> # 3.19+ Signed-off-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> --- This is compile-tested only. Ben. drivers/input/mouse/elan_i2c.h | 2 ++ drivers/input/mouse/elan_i2c_core.c | 2 +- drivers/input/mouse/elan_i2c_smbus.c | 10 ++++++++-- 3 files changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h index 599544c1a91c..243e0fa6e3e3 100644 --- a/drivers/input/mouse/elan_i2c.h +++ b/drivers/input/mouse/elan_i2c.h @@ -27,6 +27,8 @@ #define ETP_DISABLE_POWER 0x0001 #define ETP_PRESSURE_OFFSET 25 +#define ETP_CALIBRATE_MAX_LEN 3 + /* IAP Firmware handling */ #define ETP_PRODUCT_ID_FORMAT_STRING "%d.0" #define ETP_FW_NAME "elan_i2c_" ETP_PRODUCT_ID_FORMAT_STRING ".bin" diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 75e757520ef0..d5f74dd7e23b 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -610,7 +610,7 @@ static ssize_t calibrate_store(struct device *dev, int tries = 20; int retval; int error; - u8 val[3]; + u8 val[ETP_CALIBRATE_MAX_LEN]; retval = mutex_lock_interruptible(&data->sysfs_mutex); if (retval) diff --git a/drivers/input/mouse/elan_i2c_smbus.c b/drivers/input/mouse/elan_i2c_smbus.c index cfcb32559925..c060d270bc4d 100644 --- a/drivers/input/mouse/elan_i2c_smbus.c +++ b/drivers/input/mouse/elan_i2c_smbus.c @@ -56,7 +56,7 @@ static int elan_smbus_initialize(struct i2c_client *client) { u8 check[ETP_SMBUS_HELLOPACKET_LEN] = { 0x55, 0x55, 0x55, 0x55, 0x55 }; - u8 values[ETP_SMBUS_HELLOPACKET_LEN] = { 0, 0, 0, 0, 0 }; + u8 values[I2C_SMBUS_BLOCK_MAX] = {0}; int len, error; /* Get hello packet */ @@ -117,12 +117,16 @@ static int elan_smbus_calibrate(struct i2c_client *client) static int elan_smbus_calibrate_result(struct i2c_client *client, u8 *val) { int error; + u8 buf[I2C_SMBUS_BLOCK_MAX] = {0}; + + BUILD_BUG_ON(ETP_CALIBRATE_MAX_LEN > sizeof(buf)); error = i2c_smbus_read_block_data(client, - ETP_SMBUS_CALIBRATE_QUERY, val); + ETP_SMBUS_CALIBRATE_QUERY, buf); if (error < 0) return error; + memcpy(val, buf, ETP_CALIBRATE_MAX_LEN); return 0; } @@ -472,6 +476,8 @@ static int elan_smbus_get_report(struct i2c_client *client, u8 *report) { int len; + BUILD_BUG_ON(I2C_SMBUS_BLOCK_MAX > ETP_SMBUS_REPORT_LEN); + len = i2c_smbus_read_block_data(client, ETP_SMBUS_PACKET_QUERY, &report[ETP_SMBUS_REPORT_OFFSET]); -- Ben Hutchings, Software Developer Codethink Ltd https://www.codethink.co.uk/ Dale House, 35 Dale Street Manchester, M1 2HF, United Kingdom

7 years, 4 months

3
2
0 0

[PATCH 4.4, 4.9] ipv4: Fix error return value in fib_convert_metrics()

by Ben Hutchings

The validation code modified by commit 5b5e7a0de2bb ("net: metrics: add proper netlink validation") is organised differently in older kernel versions. The fib_convert_metrics() function that is modified in the backports to 4.4 and 4.9 needs to returns an error code, not a success flag. Signed-off-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> --- net/ipv4/fib_semantics.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index 9d144cbd4e62..03ebff3950d8 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -980,7 +980,7 @@ fib_convert_metrics(struct fib_info *fi, const struct fib_config *cfg) return -EINVAL; } else { if (nla_len(nla) != sizeof(u32)) - return false; + return -EINVAL; val = nla_get_u32(nla); } if (type == RTAX_ADVMSS && val > 65535 - 40) -- Ben Hutchings, Software Developer Codethink Ltd https://www.codethink.co.uk/ Dale House, 35 Dale Street Manchester, M1 2HF, United Kingdom

7 years, 4 months

1
0
0 0

[PATCH] net: ethernet: fix suspend/resume in davinci_emac

by Bartosz Golaszewski

From: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> This patch reverts commit 3243ff2a05ec ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") and adds a comment which should stop anyone from reintroducing the same "fix" in the future. We can't use bus_find_device_by_name() here because the device name is not guaranteed to be 'davinci_mdio'. On some systems it can be 'davinci_mdio.0' so we need to use strncmp() against the first part of the string to correctly match it. Fixes: 3243ff2a05ec ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") Cc: stable(a)vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> --- drivers/net/ethernet/ti/davinci_emac.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 06d7c9e4dcda..a1a6445b5a7e 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1385,6 +1385,11 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) return -EOPNOTSUPP; } +static int match_first_device(struct device *dev, void *data) +{ + return !strncmp(dev_name(dev), "davinci_mdio", 12); +} + /** * emac_dev_open - EMAC device open * @ndev: The DaVinci EMAC network adapter @@ -1484,8 +1489,14 @@ static int emac_dev_open(struct net_device *ndev) /* use the first phy on the bus if pdata did not give us a phy id */ if (!phydev && !priv->phy_id) { - phy = bus_find_device_by_name(&mdio_bus_type, NULL, - "davinci_mdio"); + /* NOTE: we can't use bus_find_device_by_name() here because + * the device name is not guaranteed to be 'davinci_mdio'. On + * some systems it can be 'davinci_mdio.0' so we need to use + * strncmp() against the first part of the string to correctly + * match it. + */ + phy = bus_find_device(&mdio_bus_type, NULL, NULL, + match_first_device); if (phy) { priv->phy_id = dev_name(phy); if (!priv->phy_id || !*priv->phy_id) -- 2.17.1

7 years, 4 months

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror