Hi Greg,
Please queue up this series of patches for 4.9 if you have no objections.
The first one is not a backport but a fix for a previous backport.
cheers
Mauricio Faria de Oliveira (4):
powerpc/rfi-flush: Differentiate enabled and patched flush types
powerpc/pseries: Fix clearing of security feature flags
powerpc: Move default security feature flags
powerpc/pseries: Restore default security feature flags on setup
Michael Ellerman (18):
powerpc/rfi-flush: Move out of HARDLOCKUP_DETECTOR #ifdef
powerpc/pseries: Support firmware disable of RFI flush
powerpc/powernv: Support firmware disable of RFI flush
powerpc/rfi-flush: Move the logic to avoid a redo into the debugfs
code
powerpc/rfi-flush: Make it possible to call setup_rfi_flush() again
powerpc/rfi-flush: Always enable fallback flush on pseries
powerpc/rfi-flush: Call setup_rfi_flush() after LPM migration
powerpc/pseries: Add new H_GET_CPU_CHARACTERISTICS flags
powerpc: Add security feature flags for Spectre/Meltdown
powerpc/pseries: Set or clear security feature flags
powerpc/powernv: Set or clear security feature flags
powerpc/64s: Move cpu_show_meltdown()
powerpc/64s: Enhance the information in cpu_show_meltdown()
powerpc/powernv: Use the security flags in pnv_setup_rfi_flush()
powerpc/pseries: Use the security flags in pseries_setup_rfi_flush()
powerpc/64s: Wire up cpu_show_spectre_v1()
powerpc/64s: Wire up cpu_show_spectre_v2()
powerpc/64s: Fix section mismatch warnings from setup_rfi_flush()
Nicholas Piggin (1):
powerpc/64s: Add support for a store forwarding barrier at kernel
entry/exit
arch/powerpc/include/asm/exception-64s.h | 29 ++++
arch/powerpc/include/asm/feature-fixups.h | 19 +++
arch/powerpc/include/asm/hvcall.h | 3 +
arch/powerpc/include/asm/security_features.h | 85 ++++++++++
arch/powerpc/include/asm/setup.h | 2 +-
arch/powerpc/kernel/Makefile | 2 +-
arch/powerpc/kernel/exceptions-64s.S | 16 +-
arch/powerpc/kernel/security.c | 237 +++++++++++++++++++++++++++
arch/powerpc/kernel/setup_64.c | 37 ++---
arch/powerpc/kernel/vmlinux.lds.S | 14 ++
arch/powerpc/lib/feature-fixups.c | 124 +++++++++++++-
arch/powerpc/platforms/powernv/setup.c | 92 ++++++++---
arch/powerpc/platforms/pseries/mobility.c | 3 +
arch/powerpc/platforms/pseries/pseries.h | 2 +
arch/powerpc/platforms/pseries/setup.c | 81 +++++++--
15 files changed, 679 insertions(+), 67 deletions(-)
create mode 100644 arch/powerpc/include/asm/security_features.h
create mode 100644 arch/powerpc/kernel/security.c
--
2.14.1
Hi Greg,
The following patches are needed in various stable releases to build
sparc/sparc64 images with gcc 7.3.0.
v4.4:
56962f8b250a Kbuild: change CC_OPTIMIZE_FOR_SIZE definition
v4.9 and earlier:
0fde7ad71ee3 sparc64: Fix build warnings with gcc 7.
v4.9:
009615ab7fd4 USB: serial: cp210x: use tcflag_t to fix incompatible pointer type
Thanks,
Guenter
The patch below does not apply to the 4.16-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From a9e8d27574f26700575473011cb607d4abdbda5f Mon Sep 17 00:00:00 2001
From: David Francis <David.Francis(a)amd.com>
Date: Thu, 31 May 2018 13:48:31 -0400
Subject: [PATCH] drm/amd/display: Make atomic-check validate underscan changes
When the underscan state was changed, atomic-check was triggering a
validation but passing the old underscan values. This change adds a
somewhat hacky check in dm_update_crtcs_state that will update the
stream if old and newunderscan values are different.
This was causing 4k on Fiji to allow underscan when it wasn't permitted.
Signed-off-by: David Francis <David.Francis(a)amd.com>
Reviewed-by: David Francis <David.Francis(a)amd.com>
Acked-by: Harry Wentland <harry.wentland(a)amd.com>
Cc: stable(a)vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com>
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index ad1ad333012a..1a7e96ee6051 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -4555,8 +4555,8 @@ static int dm_update_crtcs_state(struct dc *dc,
for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
struct amdgpu_crtc *acrtc = NULL;
struct amdgpu_dm_connector *aconnector = NULL;
- struct drm_connector_state *new_con_state = NULL;
- struct dm_connector_state *dm_conn_state = NULL;
+ struct drm_connector_state *drm_new_conn_state = NULL, *drm_old_conn_state = NULL;
+ struct dm_connector_state *dm_new_conn_state = NULL, *dm_old_conn_state = NULL;
struct drm_plane_state *new_plane_state = NULL;
new_stream = NULL;
@@ -4577,19 +4577,23 @@ static int dm_update_crtcs_state(struct dc *dc,
/* TODO This hack should go away */
if (aconnector && enable) {
// Make sure fake sink is created in plug-in scenario
- new_con_state = drm_atomic_get_connector_state(state,
+ drm_new_conn_state = drm_atomic_get_new_connector_state(state,
&aconnector->base);
+ drm_old_conn_state = drm_atomic_get_old_connector_state(state,
+ &aconnector->base);
- if (IS_ERR(new_con_state)) {
- ret = PTR_ERR_OR_ZERO(new_con_state);
+
+ if (IS_ERR(drm_new_conn_state)) {
+ ret = PTR_ERR_OR_ZERO(drm_new_conn_state);
break;
}
- dm_conn_state = to_dm_connector_state(new_con_state);
+ dm_new_conn_state = to_dm_connector_state(drm_new_conn_state);
+ dm_old_conn_state = to_dm_connector_state(drm_old_conn_state);
new_stream = create_stream_for_sink(aconnector,
&new_crtc_state->mode,
- dm_conn_state);
+ dm_new_conn_state);
/*
* we can have no stream on ACTION_SET if a display
@@ -4708,6 +4712,11 @@ static int dm_update_crtcs_state(struct dc *dc,
*/
BUG_ON(dm_new_crtc_state->stream == NULL);
+ /* Scaling or underscan settings */
+ if (is_scaling_state_different(dm_old_conn_state, dm_new_conn_state))
+ update_stream_scaling_settings(
+ &new_crtc_state->mode, dm_new_conn_state, dm_new_crtc_state->stream);
+
/* Color managment settings */
if (dm_new_crtc_state->base.color_mgmt_changed) {
ret = amdgpu_dm_set_regamma_lut(dm_new_crtc_state);
The patch below does not apply to the 4.16-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From bc13f2f88eae63af943ab967cb14bb602f8f2eeb Mon Sep 17 00:00:00 2001
From: "Leo (Sunpeng) Li" <sunpeng.li(a)amd.com>
Date: Thu, 31 May 2018 10:23:37 -0400
Subject: [PATCH] drm/amd/display: Update color props when modeset is required
This fixes issues where color management properties don't persist
over DPMS on/off, or when the CRTC is moved across connectors.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li(a)amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland(a)amd.com>
Cc: stable(a)vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com>
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 1a7e96ee6051..27579443cdc5 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -4717,8 +4717,12 @@ static int dm_update_crtcs_state(struct dc *dc,
update_stream_scaling_settings(
&new_crtc_state->mode, dm_new_conn_state, dm_new_crtc_state->stream);
- /* Color managment settings */
- if (dm_new_crtc_state->base.color_mgmt_changed) {
+ /*
+ * Color management settings. We also update color properties
+ * when a modeset is needed, to ensure it gets reprogrammed.
+ */
+ if (dm_new_crtc_state->base.color_mgmt_changed ||
+ drm_atomic_crtc_needs_modeset(new_crtc_state)) {
ret = amdgpu_dm_set_regamma_lut(dm_new_crtc_state);
if (ret)
goto fail;
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From a840c93ca7582bb6c88df2345a33f979b7a67874 Mon Sep 17 00:00:00 2001
From: Parav Pandit <parav(a)mellanox.com>
Date: Sun, 27 May 2018 14:49:16 +0300
Subject: [PATCH] IB/core: Fix error code for invalid GID entry
When a GID entry is invalid EAGAIN is returned. This is an incorrect error
code, there is nothing that will make this GID entry valid again in
bounded time.
Some user space tools fail incorrectly if EAGAIN is returned here, and
this represents a small ABI change from earlier kernels.
The first patch in the Fixes list makes entries that were valid before
to become invalid, allowing this code to trigger, while the second patch
in the Fixes list introduced the wrong EAGAIN.
Therefore revert the return result to EINVAL which matches the historical
expectations of the ibv_query_gid_type() API of the libibverbs user space
library.
Cc: <stable(a)vger.kernel.org>
Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE")
Fixes: 03db3a2d81e6 ("IB/core: Add RoCE GID table management")
Reviewed-by: Daniel Jurgens <danielj(a)mellanox.com>
Signed-off-by: Parav Pandit <parav(a)mellanox.com>
Signed-off-by: Leon Romanovsky <leonro(a)mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com>
diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c
index fb2d347f760f..ecc55e98ddd3 100644
--- a/drivers/infiniband/core/cache.c
+++ b/drivers/infiniband/core/cache.c
@@ -502,7 +502,7 @@ static int __ib_cache_gid_get(struct ib_device *ib_dev, u8 port, int index,
return -EINVAL;
if (table->data_vec[index].props & GID_TABLE_ENTRY_INVALID)
- return -EAGAIN;
+ return -EINVAL;
memcpy(gid, &table->data_vec[index].gid, sizeof(*gid));
if (attr) {
[ Not relevant upstream, therefore no upstream commit. ]
To fix, unmap the page as soon as possible.
When swiotlb is in use, calling dma_unmap_page means that
the original page mapped with dma_map_page must still be valid,
as swiotlb will copy data from its internal cache back to the
originally requested DMA location.
When GRO is enabled, before this patch all references to the
original frag may be put and the page freed before dma_unmap_page
in mlx4_en_free_frag is called.
It is possible there is a path where the use-after-free occurs
even with GRO disabled, but this has not been observed so far.
The bug can be trivially detected by doing the following:
* Compile the kernel with DEBUG_PAGEALLOC
* Run the kernel as a Xen Dom0
* Leave GRO enabled on the interface
* Run a 10 second or more test with iperf over the interface.
This bug was likely introduced in
commit 4cce66cdd14a ("mlx4_en: map entire pages to increase throughput"),
first part of u3.6.
It was incidentally fixed in
commit 34db548bfb95 ("mlx4: add page recycling in receive path"),
first part of v4.12.
This version applies to the v4.9 series.
Signed-off-by: Sarah Newman <srn(a)prgmr.com>
Tested-by: Sarah Newman <srn(a)prgmr.com>
---
drivers/net/ethernet/mellanox/mlx4/en_rx.c | 32 +++++++++++++++++++-----------
1 file changed, 20 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index 844f5ad..abe2b43 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -142,16 +142,17 @@ static void mlx4_en_free_frag(struct mlx4_en_priv *priv,
struct mlx4_en_rx_alloc *frags,
int i)
{
- const struct mlx4_en_frag_info *frag_info = &priv->frag_info[i];
- u32 next_frag_end = frags[i].page_offset + 2 * frag_info->frag_stride;
-
-
- if (next_frag_end > frags[i].page_size)
- dma_unmap_page(priv->ddev, frags[i].dma, frags[i].page_size,
- frag_info->dma_dir);
+ if (frags[i].page) {
+ const struct mlx4_en_frag_info *frag_info = &priv->frag_info[i];
+ u32 next_frag_end = frags[i].page_offset +
+ 2 * frag_info->frag_stride;
- if (frags[i].page)
+ if (next_frag_end > frags[i].page_size) {
+ dma_unmap_page(priv->ddev, frags[i].dma,
+ frags[i].page_size, frag_info->dma_dir);
+ }
put_page(frags[i].page);
+ }
}
static int mlx4_en_init_allocator(struct mlx4_en_priv *priv,
@@ -586,21 +587,28 @@ static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv,
int length)
{
struct skb_frag_struct *skb_frags_rx = skb_shinfo(skb)->frags;
- struct mlx4_en_frag_info *frag_info;
int nr;
dma_addr_t dma;
/* Collect used fragments while replacing them in the HW descriptors */
for (nr = 0; nr < priv->num_frags; nr++) {
- frag_info = &priv->frag_info[nr];
+ struct mlx4_en_frag_info *frag_info = &priv->frag_info[nr];
+ u32 next_frag_end = frags[nr].page_offset +
+ 2 * frag_info->frag_stride;
+
if (length <= frag_info->frag_prefix_size)
break;
if (unlikely(!frags[nr].page))
goto fail;
dma = be64_to_cpu(rx_desc->data[nr].addr);
- dma_sync_single_for_cpu(priv->ddev, dma, frag_info->frag_size,
- DMA_FROM_DEVICE);
+ if (next_frag_end > frags[nr].page_size)
+ dma_unmap_page(priv->ddev, frags[nr].dma,
+ frags[nr].page_size, frag_info->dma_dir);
+ else
+ dma_sync_single_for_cpu(priv->ddev, dma,
+ frag_info->frag_size,
+ DMA_FROM_DEVICE);
/* Save page reference in skb */
__skb_frag_set_page(&skb_frags_rx[nr], frags[nr].page);
--
1.9.1