- Linux-stable-mirror - lists.linaro.org

[PATCH 3/6] drm/psr: Fix missed entry in PSR setup time table.

by Dhinakaran Pandiyan

Entry corresponding to 220 us setup time was missing. I am not aware of any specific bug this fixes, but this could potentially result in enabling PSR on a panel with a higher setup time requirement than supported by the hardware. I verified the value is present in eDP spec versions 1.3, 1.4 and 1.4a. Fixes: 6608804b3d7f ("drm/dp: Add drm_dp_psr_setup_time()") Cc: stable(a)vger.kernel.org Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Cc: Jose Roberto de Souza <jose.souza(a)intel.com> Cc: dri-devel(a)lists.freedesktop.org Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan(a)intel.com> --- drivers/gpu/drm/drm_dp_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 36c7609a4bd5..a7ba602a43a8 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -1159,6 +1159,7 @@ int drm_dp_psr_setup_time(const u8 psr_cap[EDP_PSR_RECEIVER_CAP_SIZE]) static const u16 psr_setup_time_us[] = { PSR_SETUP_TIME(330), PSR_SETUP_TIME(275), + PSR_SETUP_TIME(220), PSR_SETUP_TIME(165), PSR_SETUP_TIME(110), PSR_SETUP_TIME(55), -- 2.14.1

7 years, 5 months

2
1
0 0

[PATCH v10 1/4] ioremap: Update pgtable free interfaces with addr

by Chintan Pandya

From: Chintan Pandya <cpandya(a)codeaurora.org> The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi(a)hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya(a)codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani(a)hpe.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Michal Hocko <mhocko(a)suse.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: "H. Peter Anvin" <hpa(a)zytor.com> Cc: Will Deacon <will.deacon(a)arm.com> Cc: Joerg Roedel <joro(a)8bytes.org> Cc: <stable(a)vger.kernel.org> --- arch/arm64/mm/mmu.c | 4 ++-- arch/x86/mm/pgtable.c | 8 +++++--- include/asm-generic/pgtable.h | 8 ++++---- lib/ioremap.c | 4 ++-- 4 files changed, 13 insertions(+), 11 deletions(-) diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 2dbb2c9..da98828 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -973,12 +973,12 @@ int pmd_clear_huge(pmd_t *pmdp) return 1; } -int pud_free_pmd_page(pud_t *pud) +int pud_free_pmd_page(pud_t *pud, unsigned long addr) { return pud_none(*pud); } -int pmd_free_pte_page(pmd_t *pmd) +int pmd_free_pte_page(pmd_t *pmd, unsigned long addr) { return pmd_none(*pmd); } diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index ffc8c13..37e3cba 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -718,11 +718,12 @@ int pmd_clear_huge(pmd_t *pmd) /** * pud_free_pmd_page - Clear pud entry and free pmd page. * @pud: Pointer to a PUD. + * @addr: Virtual address associated with pud. * * Context: The pud range has been unmaped and TLB purged. * Return: 1 if clearing the entry succeeded. 0 otherwise. */ -int pud_free_pmd_page(pud_t *pud) +int pud_free_pmd_page(pud_t *pud, unsigned long addr) { pmd_t *pmd; int i; @@ -733,7 +734,7 @@ int pud_free_pmd_page(pud_t *pud) pmd = (pmd_t *)pud_page_vaddr(*pud); for (i = 0; i < PTRS_PER_PMD; i++) - if (!pmd_free_pte_page(&pmd[i])) + if (!pmd_free_pte_page(&pmd[i], addr + (i * PMD_SIZE))) return 0; pud_clear(pud); @@ -745,11 +746,12 @@ int pud_free_pmd_page(pud_t *pud) /** * pmd_free_pte_page - Clear pmd entry and free pte page. * @pmd: Pointer to a PMD. + * @addr: Virtual address associated with pmd. * * Context: The pmd range has been unmaped and TLB purged. * Return: 1 if clearing the entry succeeded. 0 otherwise. */ -int pmd_free_pte_page(pmd_t *pmd) +int pmd_free_pte_page(pmd_t *pmd, unsigned long addr) { pte_t *pte; diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index f59639a..b081794 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -1019,8 +1019,8 @@ static inline int p4d_clear_huge(p4d_t *p4d) int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot); int pud_clear_huge(pud_t *pud); int pmd_clear_huge(pmd_t *pmd); -int pud_free_pmd_page(pud_t *pud); -int pmd_free_pte_page(pmd_t *pmd); +int pud_free_pmd_page(pud_t *pud, unsigned long addr); +int pmd_free_pte_page(pmd_t *pmd, unsigned long addr); #else /* !CONFIG_HAVE_ARCH_HUGE_VMAP */ static inline int p4d_set_huge(p4d_t *p4d, phys_addr_t addr, pgprot_t prot) { @@ -1046,11 +1046,11 @@ static inline int pmd_clear_huge(pmd_t *pmd) { return 0; } -static inline int pud_free_pmd_page(pud_t *pud) +static inline int pud_free_pmd_page(pud_t *pud, unsigned long addr) { return 0; } -static inline int pmd_free_pte_page(pmd_t *pmd) +static inline int pmd_free_pte_page(pmd_t *pmd, unsigned long addr) { return 0; } diff --git a/lib/ioremap.c b/lib/ioremap.c index 54e5bba..517f585 100644 --- a/lib/ioremap.c +++ b/lib/ioremap.c @@ -92,7 +92,7 @@ static inline int ioremap_pmd_range(pud_t *pud, unsigned long addr, if (ioremap_pmd_enabled() && ((next - addr) == PMD_SIZE) && IS_ALIGNED(phys_addr + addr, PMD_SIZE) && - pmd_free_pte_page(pmd)) { + pmd_free_pte_page(pmd, addr)) { if (pmd_set_huge(pmd, phys_addr + addr, prot)) continue; } @@ -119,7 +119,7 @@ static inline int ioremap_pud_range(p4d_t *p4d, unsigned long addr, if (ioremap_pud_enabled() && ((next - addr) == PUD_SIZE) && IS_ALIGNED(phys_addr + addr, PUD_SIZE) && - pud_free_pmd_page(pud)) { + pud_free_pmd_page(pud, addr)) { if (pud_set_huge(pud, phys_addr + addr, prot)) continue; } -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

7 years, 5 months

1
0
0 0

[PATCH] media: rc: ensure input/lirc device can be opened after register

by Sean Young

Since commit cb84343fced1 ("media: lirc: do not call close() or open() on unregistered devices") rc_open() will return -ENODEV if rcdev->registered is false. Ensure this is set before we register the input device and the lirc device, else we have a short window where the neither the lirc or input device can be opened. Fixes: cb84343fced1 ("media: lirc: do not call close() or open() on unregistered devices") Cc: stable(a)vger.kernel.org # v4.16+ Signed-off-by: Sean Young <sean(a)mess.org> --- drivers/media/rc/rc-main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index b7071bde670a..2e222d9ee01f 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -1862,6 +1862,8 @@ int rc_register_device(struct rc_dev *dev) dev->device_name ?: "Unspecified device", path ?: "N/A"); kfree(path); + dev->registered = true; + if (dev->driver_type != RC_DRIVER_IR_RAW_TX) { rc = rc_setup_rx_device(dev); if (rc) @@ -1881,8 +1883,6 @@ int rc_register_device(struct rc_dev *dev) goto out_lirc; } - dev->registered = true; - dev_dbg(&dev->dev, "Registered rc%u (driver: %s)\n", dev->minor, dev->driver_name ? dev->driver_name : "unknown"); -- 2.17.0

7 years, 5 months

1
0
0 0

RE: [PATCH]

by Fabrizio Castro

Hello Greg, Thank you for your feedback. > Subject: Re: [PATCH] dmaengine: ensure dmaengine helpers check valid callback > > On Mon, May 21, 2018 at 05:56:55PM +0100, Fabrizio Castro wrote: > > From: Vinod Koul <vinod.koul(a)intel.com> > > > > commit 757d12e5849be549076901b0d33c60d5f360269c upstream. > > > > dmaengine has various device callbacks and exposes helper > > functions to invoke these. These helpers should check if channel, > > device and callback is valid or not before invoking them. > > > > Reported-by: Jon Hunter <jonathanh(a)nvidia.com> > > Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> > > [fabrizio: cherry-pick to 4.4] > > Signed-off-by: Fabrizio Castro <fabrizio.castro(a)bp.renesas.com> > > Signed-off-by: Jianming Qiao <jianming.qiao(a)bp.renesas.com> > > --- > > Hello Greg, > > > > while backporting commit 757d12e5849be549076901b0d33c60d5f360269c > > to the CIP kernel Ben recommended to send the same patch to you > > for 4.4 stable. > > I hope the format of the commit is the one you expect (reference to > > the upstream commit, version to cherry-pick the patch to, and > > Signed-off-by tags). > > Format is fine, but why is this needed in the 4.4.y kernel tree? We work with the CIP kernel (v4.4), and from time to time we come across bug fixes we feel like stable could benefit from. Also, since Ben merges the CIP branch with stable, the fixes we make to stable will appear in the CIP kernel too at some point. If you feel like the patch is not worth considering for stable, it can still be applied to the CIP kernel if required. Ben has already taken this patch (for v4.4.126-cip22) therefore it's not on our critical path, but it would be nice to have in the stable kernel too. > What bug does it solve? Without this patch we managed to get the kernel to try and dereference a NULL pointer while playing around with ttys (basically by having the wrong tty with /etc/securetty). Are you happy to take this patch? Thanks, Fab > > thanks, > > greg k-h Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

7 years, 5 months

2
2
0 0

[PATCH] usb: typec: wcove: Remove dependency on HW FSM

by Heikki Krogerus

The USB Type-C PHY in Intel WhiskeyCove PMIC has build-in USB Type-C state machine which we were relying on to configure the CC lines correctly. This patch removes that dependency and configures the CC line according to commands from the port manager (tcpm.c) in wcove_set_cc(). This fixes an issue where USB devices attached to the USB Type-C port do not get enumerated. When acting as source/host, the HW FSM sometimes fails to configure the PHY correctly. Fixes: 3c4fb9f16921 ("usb: typec: wcove: start using tcpm for USB PD support") Cc: stable(a)vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> --- drivers/usb/typec/typec_wcove.c | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb/typec/typec_wcove.c index 39cff11ec7a2..423208e19383 100644 --- a/drivers/usb/typec/typec_wcove.c +++ b/drivers/usb/typec/typec_wcove.c @@ -202,6 +202,10 @@ static int wcove_init(struct tcpc_dev *tcpc) struct wcove_typec *wcove = tcpc_to_wcove(tcpc); int ret; + ret = regmap_write(wcove->regmap, USBC_CONTROL1, 0); + if (ret) + return ret; + /* Unmask everything */ ret = regmap_write(wcove->regmap, USBC_IRQMASK1, 0); if (ret) @@ -285,8 +289,30 @@ static int wcove_get_cc(struct tcpc_dev *tcpc, enum typec_cc_status *cc1, static int wcove_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc) { - /* XXX: Relying on the HW FSM to configure things correctly for now */ - return 0; + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + unsigned int ctrl; + + switch (cc) { + case TYPEC_CC_RD: + ctrl = USBC_CONTROL1_MODE_SNK; + break; + case TYPEC_CC_RP_DEF: + ctrl = USBC_CONTROL1_CURSRC_UA_80 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_RP_1_5: + ctrl = USBC_CONTROL1_CURSRC_UA_180 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_RP_3_0: + ctrl = USBC_CONTROL1_CURSRC_UA_330 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_OPEN: + ctrl = 0; + break; + default: + return -EINVAL; + } + + return regmap_write(wcove->regmap, USBC_CONTROL1, ctrl); } static int wcove_set_polarity(struct tcpc_dev *tcpc, enum typec_cc_polarity pol) -- 2.17.0

7 years, 5 months

1
0
0 0

[GIT PULL 2/2] intel_th: Use correct device when freeing buffers

by Alexander Shishkin

Commit d5c435df4a890 ("intel_th: msu: Use the real device in case of IOMMU domain allocation") changes dma buffer allocation to use the actual underlying device, but forgets to change the deallocation path, which leads to (if you've got CAP_SYS_RAWIO): > # echo 0,0 > /sys/bus/intel_th/devices/0-msc0/nr_pages > ------------[ cut here ]------------ > kernel BUG at ../linux/drivers/iommu/intel-iommu.c:3670! > CPU: 3 PID: 231 Comm: sh Not tainted 4.17.0-rc1+ #2729 > RIP: 0010:intel_unmap+0x11e/0x130 ... > Call Trace: > intel_free_coherent+0x3e/0x60 > msc_buffer_win_free+0x100/0x160 [intel_th_msu] This patch fixes the buffer deallocation code to use the correct device. Signed-off-by: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Fixes: d5c435df4a890 ("intel_th: msu: Use the real device in case of IOMMU domain allocation") Reported-by: Baofeng Tian <baofeng.tian(a)intel.com> CC: stable(a)vger.kernel.org # v4.14+ --- drivers/hwtracing/intel_th/msu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwtracing/intel_th/msu.c b/drivers/hwtracing/intel_th/msu.c index ede388309376..634f58042c77 100644 --- a/drivers/hwtracing/intel_th/msu.c +++ b/drivers/hwtracing/intel_th/msu.c @@ -733,8 +733,8 @@ static int msc_buffer_win_alloc(struct msc *msc, unsigned int nr_blocks) /* Reset the page to write-back before releasing */ set_memory_wb((unsigned long)win->block[i].bdesc, 1); #endif - dma_free_coherent(msc_dev(msc), size, win->block[i].bdesc, - win->block[i].addr); + dma_free_coherent(msc_dev(msc)->parent->parent, size, + win->block[i].bdesc, win->block[i].addr); } kfree(win); @@ -769,7 +769,7 @@ static void msc_buffer_win_free(struct msc *msc, struct msc_window *win) /* Reset the page to write-back before releasing */ set_memory_wb((unsigned long)win->block[i].bdesc, 1); #endif - dma_free_coherent(msc_dev(win->msc), PAGE_SIZE, + dma_free_coherent(msc_dev(win->msc)->parent->parent, PAGE_SIZE, win->block[i].bdesc, win->block[i].addr); } -- 2.17.0

7 years, 5 months

1
0
0 0

[GIT PULL 1/2] stm class: Use vmalloc for the master map

by Alexander Shishkin

Fengguang is running into a warning from the buddy allocator: > swapper/0: page allocation failure: order:9, mode:0x14040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null) > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.17.0-rc1 #262 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 > Call Trace: ... > __kmalloc+0x14b/0x180: ____cache_alloc at mm/slab.c:3127 > stm_register_device+0xf3/0x5c0: stm_register_device at drivers/hwtracing/stm/core.c:695 ... Which is basically a result of the stm class trying to allocate ~512kB for the dummy_stm with its default parameters. There's no reason, however, for it not to be vmalloc()ed instead, which is what this patch does. Reported-by: Fengguang Wu <fengguang.wu(a)intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> CC: stable(a)vger.kernel.org # v4.4+ --- drivers/hwtracing/stm/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwtracing/stm/core.c b/drivers/hwtracing/stm/core.c index 05386b76465e..657badb479a5 100644 --- a/drivers/hwtracing/stm/core.c +++ b/drivers/hwtracing/stm/core.c @@ -674,7 +674,7 @@ static void stm_device_release(struct device *dev) { struct stm_device *stm = to_stm_device(dev); - kfree(stm); + vfree(stm); } int stm_register_device(struct device *parent, struct stm_data *stm_data, @@ -691,7 +691,7 @@ int stm_register_device(struct device *parent, struct stm_data *stm_data, return -EINVAL; nmasters = stm_data->sw_end - stm_data->sw_start + 1; - stm = kzalloc(sizeof(*stm) + nmasters * sizeof(void *), GFP_KERNEL); + stm = vzalloc(sizeof(*stm) + nmasters * sizeof(void *)); if (!stm) return -ENOMEM; @@ -744,7 +744,7 @@ int stm_register_device(struct device *parent, struct stm_data *stm_data, /* matches device_initialize() above */ put_device(&stm->dev); err_free: - kfree(stm); + vfree(stm); return err; } -- 2.17.0

7 years, 5 months

1
0
0 0

[PATCH] pinctrl: armada-37xx: Fix spurious irq management

by Gregory CLEMENT

From: Terry Zhou <bjzhou(a)marvell.com> Until now, if we found spurious irq in irq_handler, we only updated the status in register but not the status in the code. Due to this the system will got stuck dues to the infinite loop [gregory.clement(a)bootlin.com: update comment and add fix and stable tags] Fixes: 30ac0d3b0702 ("pinctrl: armada-37xx: Add edge both type gpio irq support") Cc: <stable(a)vger.kernel.org> Signed-off-by: Terry Zhou <bjzhou(a)marvell.com> Reviewed-by: Gregory CLEMENT <gregory.clement(a)bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement(a)bootlin.com> --- drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c index 5b63248c8209..7bef929bd7fe 100644 --- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c +++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c @@ -679,12 +679,13 @@ static void armada_37xx_irq_handler(struct irq_desc *desc) writel(1 << hwirq, info->base + IRQ_STATUS + 4 * i); - continue; + goto update_status; } } generic_handle_irq(virq); +update_status: /* Update status in case a new IRQ appears */ spin_lock_irqsave(&info->irq_lock, flags); status = readl_relaxed(info->base + -- 2.17.0

7 years, 5 months

2
1
0 0

[PATCH] gpio: rcar: Add Runtime PM handling for interrupts

by Fabrizio Castro

From: Geert Uytterhoeven <geert+renesas(a)glider.be> commit b26a719bdba9aa926ceaadecc66e07623d2b8a53 upstream. The R-Car GPIO driver handles Runtime PM for requested GPIOs only. When using a GPIO purely as an interrupt source, no Runtime PM handling is done, and the GPIO module's clock may not be enabled. To fix this: - Add .irq_request_resources() and .irq_release_resources() callbacks to handle Runtime PM when an interrupt is requested, - Add irq_bus_lock() and sync_unlock() callbacks to handle Runtime PM when e.g. disabling/enabling an interrupt, or configuring the interrupt type. Fixes: d5c3d84657db57bd "net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS" Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> [fabrizio: cherry-pick to v4.4.y. Use container_of instead of gpiochip_get_data.] Signed-off-by: Fabrizio Castro <fabrizio.castro(a)bp.renesas.com> Reviewed-by: Biju Das <biju.das(a)bp.renesas.com> --- Hi Greg, on R-Car we have found that if a GPIO is used purely as an interrupt source, the corresponding clock is not enabled, therefore the interrupt doesn't work. On Koelsch, the HDMI trasmitter node in the DT uses GPIO 3 29 for the interrupt line, and since gpio3 is used only for this, its clock is OFF, preventing the interrupt from working. This patch fixes this problem. Would you please consider this patch for 4.4.y? Thanks, Fab drivers/gpio/gpio-rcar.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index 2a81224..9ba4aaa 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -200,6 +200,48 @@ static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on) return 0; } +static void gpio_rcar_irq_bus_lock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct gpio_rcar_priv *p = container_of(gc, struct gpio_rcar_priv, + gpio_chip); + + pm_runtime_get_sync(&p->pdev->dev); +} + +static void gpio_rcar_irq_bus_sync_unlock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct gpio_rcar_priv *p = container_of(gc, struct gpio_rcar_priv, + gpio_chip); + + pm_runtime_put(&p->pdev->dev); +} + + +static int gpio_rcar_irq_request_resources(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct gpio_rcar_priv *p = container_of(gc, struct gpio_rcar_priv, + gpio_chip); + int error; + + error = pm_runtime_get_sync(&p->pdev->dev); + if (error < 0) + return error; + + return 0; +} + +static void gpio_rcar_irq_release_resources(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct gpio_rcar_priv *p = container_of(gc, struct gpio_rcar_priv, + gpio_chip); + + pm_runtime_put(&p->pdev->dev); +} + static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id) { struct gpio_rcar_priv *p = dev_id; @@ -460,6 +502,10 @@ static int gpio_rcar_probe(struct platform_device *pdev) irq_chip->irq_unmask = gpio_rcar_irq_enable; irq_chip->irq_set_type = gpio_rcar_irq_set_type; irq_chip->irq_set_wake = gpio_rcar_irq_set_wake; + irq_chip->irq_bus_lock = gpio_rcar_irq_bus_lock; + irq_chip->irq_bus_sync_unlock = gpio_rcar_irq_bus_sync_unlock; + irq_chip->irq_request_resources = gpio_rcar_irq_request_resources; + irq_chip->irq_release_resources = gpio_rcar_irq_release_resources; irq_chip->flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND; ret = gpiochip_add(gpio_chip); -- 2.7.4

7 years, 5 months

2
1
0 0

Please apply 318aaf34f117 ("scsi: libsas: defer ata device eh...") to stable releases

by Guenter Roeck

Hi Greg, commit 318aaf34f1179b39f ("scsi: libsas: defer ata device eh commands to libata") fixes CVE-2018-10021. Its severity is disputed, yet it is a real bug. Please consider applying it to stable releases. Thanks, Guenter

7 years, 5 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror