The below commit
"drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2"
introduces a slight behavioral change to rmfb. Instead of disabling a crtc
when the primary plane is disabled, it now preserves it.
Since DC is currently not equipped to handle this we need to fail such
a commit, otherwise we might see a corrupted screen.
This is based on Shirish's previous approach but avoids adding all
planes to the new atomic state which leads to a full update in DC for
any commit, and is not what we intend.
Theoretically DM should be able to deal with states with fully populated planes,
even for simple updates, such as cursor updates. This should still be
addressed in the future.
Signed-off-by: Harry Wentland <harry.wentland(a)amd.com>
Tested-by: Michel Dänzer <michel.daenzer(a)amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng(a)amd.com>
Cc: stable(a)vger.kernel.org
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 72968958e2b1..75fe04692172 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -4671,6 +4671,7 @@ static int dm_update_crtcs_state(struct amdgpu_display_manager *dm,
struct amdgpu_dm_connector *aconnector = NULL;
struct drm_connector_state *new_con_state = NULL;
struct dm_connector_state *dm_conn_state = NULL;
+ struct drm_plane_state *new_plane_state = NULL;
new_stream = NULL;
@@ -4678,6 +4679,13 @@ static int dm_update_crtcs_state(struct amdgpu_display_manager *dm,
dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
acrtc = to_amdgpu_crtc(crtc);
+ new_plane_state = drm_atomic_get_new_plane_state(state, new_crtc_state->crtc->primary);
+
+ if (new_crtc_state->enable && new_plane_state && !new_plane_state->fb) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
aconnector = amdgpu_dm_find_first_crtc_matching_connector(state, crtc);
/* TODO This hack should go away */
@@ -4882,7 +4890,7 @@ static int dm_update_planes_state(struct dc *dc,
if (!dm_old_crtc_state->stream)
continue;
- DRM_DEBUG_DRIVER("Disabling DRM plane: %d on DRM crtc %d\n",
+ DRM_DEBUG_ATOMIC("Disabling DRM plane: %d on DRM crtc %d\n",
plane->base.id, old_plane_crtc->base.id);
if (!dc_remove_plane_from_context(
--
2.17.0
Otherwise modules that use these arithmetic operations will fail to
link. We accomplish this with EXPORT_SYMBOL in the .S file, but because
of symbol versioning, we actually need to have a declaration of these
too in C. So, we introduce asm-prototypes.h, which is the same file name
and technique used for similar reasons in the m68k arch tree.
While we're at it, we also fix this up to use SPDX, and I personally
choose to relicense this as GPL2||BSD so that these symbols don't need
to be export_symbol_gpl, so all modules can use the routines, since
these are important general purpose compiler-generated function calls.
Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com>
Reported-by: PaX Team <pageexec(a)freemail.hu>
Cc: stable(a)vger.kernel.org
---
arch/arm64/include/asm/asm-prototypes.h | 11 +++++++++++
arch/arm64/lib/tishift.S | 19 ++++++-------------
2 files changed, 17 insertions(+), 13 deletions(-)
create mode 100644 arch/arm64/include/asm/asm-prototypes.h
diff --git a/arch/arm64/include/asm/asm-prototypes.h b/arch/arm64/include/asm/asm-prototypes.h
new file mode 100644
index 000000000000..8f1919e44f51
--- /dev/null
+++ b/arch/arm64/include/asm/asm-prototypes.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+ *
+ * Copyright (C) 2017-2018 Jason A. Donenfeld <Jason(a)zx2c4.com>. All Rights Reserved.
+ */
+
+/* These functions are defined in lib/tishift.S, but need to be declared
+ * here so that symbol versioning picks them up.
+ */
+extern long long __ashlti3(long long a, int b);
+extern long long __ashrti3(long long a, int b);
+extern long long __lshrti3(long long a, int b);
diff --git a/arch/arm64/lib/tishift.S b/arch/arm64/lib/tishift.S
index d3db9b2cd479..3bca433973cb 100644
--- a/arch/arm64/lib/tishift.S
+++ b/arch/arm64/lib/tishift.S
@@ -1,20 +1,10 @@
-/*
- * Copyright (C) 2017 Jason A. Donenfeld <Jason(a)zx2c4.com>. All Rights Reserved.
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2017-2018 Jason A. Donenfeld <Jason(a)zx2c4.com>. All Rights Reserved.
*/
#include <linux/linkage.h>
+#include <asm-generic/export.h>
ENTRY(__ashlti3)
cbz x2, 1f
@@ -36,6 +26,7 @@ ENTRY(__ashlti3)
mov x0, x2
ret
ENDPROC(__ashlti3)
+EXPORT_SYMBOL(__ashlti3)
ENTRY(__ashrti3)
cbz x2, 1f
@@ -57,6 +48,7 @@ ENTRY(__ashrti3)
mov x1, x2
ret
ENDPROC(__ashrti3)
+EXPORT_SYMBOL(__ashrti3)
ENTRY(__lshrti3)
cbz x2, 1f
@@ -78,3 +70,4 @@ ENTRY(__lshrti3)
mov x1, x2
ret
ENDPROC(__lshrti3)
+EXPORT_SYMBOL(__lshrti3)
--
2.17.0
On 11/04/2016 05:35 PM, Martin K. Petersen wrote:
>>>>>> "Hannes" == Hannes Reinecke <hare(a)suse.de> writes:
>
> Hannes> Checking with SAT-3 (section 6.2.4: Commands the SATL queues
> Hannes> internally) the implemented behaviour is standards conformant,
> Hannes> although the standard also allows for returning 'TASK SET FULL'
> Hannes> or 'BUSY' in these cases. Doing so would nicely solve this
> Hannes> issue.
>
> I agree with Hannes that it would be appropriate for the SATL to report
> busy when it makes an non-queued command queueable.
Wouldn't this potentially still cause problems if the secure erase takes
longer than max_retries * scmd_tmo. I.e. the command timing out by
default after 180 seconds as in
https://www.spinics.net/lists/linux-block/msg24837.html ?
The fix approach here seems to also handle this gracefully.
--
Mit freundlichen Grüßen / Kind regards
Steffen Maier
Linux on z Systems Development
IBM Deutschland Research & Development GmbH
Vorsitzende des Aufsichtsrats: Martina Koederitz
Geschaeftsfuehrung: Dirk Wittkopp
Sitz der Gesellschaft: Boeblingen
Registergericht: Amtsgericht Stuttgart, HRB 243294
commit 5e1df40f40ee45a97bb1066c3d71f0ae920a9672 upstream.
Currently we see sporadic timeouts during CDCLK changing both on BXT and
GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by
changing the frequency in a tight loop after blanking the display. The
upper bound for the completion time is 800us based on my tests, so
increase it from the current 500us to 2ms; with that I couldn't trigger
the problem either on BXT or GLK.
Note that timeouts happened during both the change notification and the
voltage level setting PCODE request. (For the latter one BSpec doesn't
require us to wait for completion before further HW programming.)
This issue is similar to
commit 2c7d0602c815 ("drm/i915/gen9: Fix PCODE polling during CDCLK
change notification")
but there the PCODE request does complete (as shown by the mbox
busy flag), only the reply we get from PCODE indicates a failure.
So there we keep resending the request until a success reply, here we
just have to increase the timeout for the one PCODE request we send.
v2:
- s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville)
Cc: Chris Wilson <chris(a)chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com>
Cc: <stable(a)vger.kernel.org> # v4.14
Acked-by: Chris Wilson <chris(a)chris-wilson.co.uk> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326
Reviewed-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com>
Signed-off-by: Imre Deak <imre.deak(a)intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.d…
(cherry picked from commit e76019a81921e87a4d9e7b3d86102bc708a6c227)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com>
(Rebased for v4.14 stable tree due to upstream cdclk_state and pcu_lock change)
Signed-off-by: Imre Deak <imre.deak(a)intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 6 +++++-
drivers/gpu/drm/i915/intel_cdclk.c | 22 +++++++++++++++++-----
drivers/gpu/drm/i915/intel_pm.c | 6 +++---
3 files changed, 25 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 3f818412765c..51411894d2cd 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3995,7 +3995,11 @@ extern void intel_display_print_error_state(struct drm_i915_error_state_buf *e,
struct intel_display_error_state *error);
int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val);
-int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u32 mbox, u32 val);
+int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv, u32 mbox,
+ u32 val, int timeout_us);
+#define sandybridge_pcode_write(dev_priv, mbox, val) \
+ sandybridge_pcode_write_timeout(dev_priv, mbox, val, 500)
+
int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32 request,
u32 reply_mask, u32 reply, int timeout_base_ms);
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 26a8dcd2c549..47ad24229c78 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -1289,10 +1289,15 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
break;
}
- /* Inform power controller of upcoming frequency change */
mutex_lock(&dev_priv->rps.hw_lock);
- ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
- 0x80000000);
+ /*
+ * Inform power controller of upcoming frequency change. BSpec
+ * requires us to wait up to 150usec, but that leads to timeouts;
+ * the 2ms used here is based on experiment.
+ */
+ ret = sandybridge_pcode_write_timeout(dev_priv,
+ HSW_PCODE_DE_WRITE_FREQ_REQ,
+ 0x80000000, 2000);
mutex_unlock(&dev_priv->rps.hw_lock);
if (ret) {
@@ -1323,8 +1328,15 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
I915_WRITE(CDCLK_CTL, val);
mutex_lock(&dev_priv->rps.hw_lock);
- ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
- DIV_ROUND_UP(cdclk, 25000));
+ /*
+ * The timeout isn't specified, the 2ms used here is based on
+ * experiment.
+ * FIXME: Waiting for the request completion could be delayed until
+ * the next PCODE request based on BSpec.
+ */
+ ret = sandybridge_pcode_write_timeout(dev_priv,
+ HSW_PCODE_DE_WRITE_FREQ_REQ,
+ DIV_ROUND_UP(cdclk, 25000), 2000);
mutex_unlock(&dev_priv->rps.hw_lock);
if (ret) {
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 014e5c08571a..87cccb5f8c5d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -8941,8 +8941,8 @@ int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val
return 0;
}
-int sandybridge_pcode_write(struct drm_i915_private *dev_priv,
- u32 mbox, u32 val)
+int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv,
+ u32 mbox, u32 val, int timeout_us)
{
int status;
@@ -8965,7 +8965,7 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv,
if (__intel_wait_for_register_fw(dev_priv,
GEN6_PCODE_MAILBOX, GEN6_PCODE_READY, 0,
- 500, 0, NULL)) {
+ timeout_us, 0, NULL)) {
DRM_ERROR("timeout waiting for pcode write of 0x%08x to mbox %x to finish for %ps\n",
val, mbox, __builtin_return_address(0));
return -ETIMEDOUT;
--
2.13.2
From: Halil Pasic <pasic(a)linux.vnet.ibm.com>
If the translation of a channel program fails, we may end up attempting
to clean up (free, unpin) stuff that never got translated (and allocated,
pinned) in the first place.
By adjusting the lengths of the chains accordingly (so the element that
failed, and all subsequent elements are excluded) cleanup activities
based on false assumptions can be avoided.
Let's make sure cp_free works properly after cp_prefetch returns with an
error by setting ch_len of a ccw chain to the number of the translated
CCWs on that chain.
Cc: stable(a)vger.kernel.org #v4.12+
Acked-by: Pierre Morel <pmorel(a)linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi(a)linux.vnet.ibm.com>
Signed-off-by: Halil Pasic <pasic(a)linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi(a)linux.vnet.ibm.com>
Message-Id: <20180423110113.59385-2-bjsdjshi(a)linux.vnet.ibm.com>
[CH: fixed typos]
Signed-off-by: Cornelia Huck <cohuck(a)redhat.com>
---
drivers/s390/cio/vfio_ccw_cp.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/s390/cio/vfio_ccw_cp.c b/drivers/s390/cio/vfio_ccw_cp.c
index 2c7550797ec2..dce92b2a895d 100644
--- a/drivers/s390/cio/vfio_ccw_cp.c
+++ b/drivers/s390/cio/vfio_ccw_cp.c
@@ -715,6 +715,10 @@ void cp_free(struct channel_program *cp)
* and stores the result to ccwchain list. @cp must have been
* initialized by a previous call with cp_init(). Otherwise, undefined
* behavior occurs.
+ * For each chain composing the channel program:
+ * - On entry ch_len holds the count of CCWs to be translated.
+ * - On exit ch_len is adjusted to the count of successfully translated CCWs.
+ * This allows cp_free to find in ch_len the count of CCWs to free in a chain.
*
* The S/390 CCW Translation APIS (prefixed by 'cp_') are introduced
* as helpers to do ccw chain translation inside the kernel. Basically
@@ -749,11 +753,18 @@ int cp_prefetch(struct channel_program *cp)
for (idx = 0; idx < len; idx++) {
ret = ccwchain_fetch_one(chain, idx, cp);
if (ret)
- return ret;
+ goto out_err;
}
}
return 0;
+out_err:
+ /* Only cleanup the chain elements that were actually translated. */
+ chain->ch_len = idx;
+ list_for_each_entry_continue(chain, &cp->ccwchain_list, next) {
+ chain->ch_len = 0;
+ }
+ return ret;
}
/**
--
2.14.3