- Linux-stable-mirror - lists.linaro.org

[PATCH 1/3] xhci: Fix USB ports for Dell Inspiron 5775

by Mathias Nyman

From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> The Dell Inspiron 5775 is a Raven Ridge. The Enable Slot command timed out when a USB device gets plugged: [ 212.156326] xhci_hcd 0000:03:00.3: Error while assigning device slot ID [ 212.156340] xhci_hcd 0000:03:00.3: Max number of devices this xHCI host supports is 64. [ 212.156348] usb usb2-port3: couldn't allocate usb_device AMD suggests that a delay before xHC suspends can fix the issue. I can confirm it fixes the issue, so use the suspend delay quirk for Raven Ridge's xHC. Cc: stable(a)vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci-pci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index f17b7ea..85ffda8 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -126,7 +126,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) xhci->quirks |= XHCI_AMD_PLL_FIX; - if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x43bb) + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == 0x15e0 || + pdev->device == 0x15e1 || + pdev->device == 0x43bb)) xhci->quirks |= XHCI_SUSPEND_DELAY; if (pdev->vendor == PCI_VENDOR_ID_AMD) -- 2.7.4

7 years, 6 months

1
0
0 0

[PATCH 1/2] drm/i915: Use ktime on wait_for

by Mika Kuoppala

We use jiffies to determine when wait expires. However Imre did find out that jiffies can and will do a >1 increments on certain situations [1]. When this happens in a wait_for loop, we return timeout errorneously much earlier than what the real wallclock would say. We can't afford our waits to timeout prematurely. Discard jiffies and change to ktime to detect timeouts. v2: added bugzilla entry (Imre), added stable (Chris) Reported-by: Imre Deak <imre.deak(a)intel.com> References: https://lkml.org/lkml/2018/4/18/798 [1] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105771 Cc: Imre Deak <imre.deak(a)intel.com> Cc: Chris Wilson <chris(a)chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Mika Kuoppala <mika.kuoppala(a)linux.intel.com> Reviewed-by: Chris Wilson <chris(a)chris-wilson.co.uk> --- drivers/gpu/drm/i915/intel_drv.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 8b20824e806e..ac7565220aa3 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -49,12 +49,12 @@ * check the condition before the timeout. */ #define __wait_for(OP, COND, US, Wmin, Wmax) ({ \ - unsigned long timeout__ = jiffies + usecs_to_jiffies(US) + 1; \ + const ktime_t end__ = ktime_add_ns(ktime_get_raw(), 1000ll * (US)); \ long wait__ = (Wmin); /* recommended min for usleep is 10 us */ \ int ret__; \ might_sleep(); \ for (;;) { \ - bool expired__ = time_after(jiffies, timeout__); \ + const bool expired__ = ktime_after(ktime_get_raw(), end__); \ OP; \ if (COND) { \ ret__ = 0; \ -- 2.14.1

7 years, 6 months

1
0
0 0

[git:media_tree/master] media: rc: mce_kbd decoder: fix stuck keys

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: rc: mce_kbd decoder: fix stuck keys Author: Sean Young <sean(a)mess.org> Date: Sun Apr 8 06:36:40 2018 -0400 The MCE Remote sends a 0 scancode when keys are released. If this is not received or decoded, then keys can get "stuck"; the keyup event is not sent since the input_sync() is missing from the timeout handler. Cc: stable(a)vger.kernel.org Signed-off-by: Sean Young <sean(a)mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> drivers/media/rc/ir-mce_kbd-decoder.c | 2 ++ 1 file changed, 2 insertions(+) --- diff --git a/drivers/media/rc/ir-mce_kbd-decoder.c b/drivers/media/rc/ir-mce_kbd-decoder.c index f94e89ebc724..002b8323ae69 100644 --- a/drivers/media/rc/ir-mce_kbd-decoder.c +++ b/drivers/media/rc/ir-mce_kbd-decoder.c @@ -130,6 +130,8 @@ static void mce_kbd_rx_timeout(struct timer_list *t) for (i = 0; i < MCIR2_MASK_KEYS_START; i++) input_report_key(raw->mce_kbd.idev, kbd_keycodes[i], 0); + + input_sync(raw->mce_kbd.idev); } static enum mce_kbd_mode mce_kbd_mode(struct mce_kbd_dec *data)

7 years, 6 months

1
0
0 0

[git:media_tree/master] media: rc: mce_kbd decoder: fix stuck keys

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: rc: mce_kbd decoder: fix stuck keys Author: Sean Young <sean(a)mess.org> Date: Sun Apr 8 06:36:40 2018 -0400 The MCE Remote sends a 0 scancode when keys are released. If this is not received or decoded, then keys can get "stuck"; the keyup event is not sent since the input_sync() is missing from the timeout handler. Cc: stable(a)vger.kernel.org Signed-off-by: Sean Young <sean(a)mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> drivers/media/rc/ir-mce_kbd-decoder.c | 2 ++ 1 file changed, 2 insertions(+) --- diff --git a/drivers/media/rc/ir-mce_kbd-decoder.c b/drivers/media/rc/ir-mce_kbd-decoder.c index f94e89ebc724..002b8323ae69 100644 --- a/drivers/media/rc/ir-mce_kbd-decoder.c +++ b/drivers/media/rc/ir-mce_kbd-decoder.c @@ -130,6 +130,8 @@ static void mce_kbd_rx_timeout(struct timer_list *t) for (i = 0; i < MCIR2_MASK_KEYS_START; i++) input_report_key(raw->mce_kbd.idev, kbd_keycodes[i], 0); + + input_sync(raw->mce_kbd.idev); } static enum mce_kbd_mode mce_kbd_mode(struct mce_kbd_dec *data)

7 years, 6 months

1
0
0 0

[git:media_tree/master] media: cx231xx: Add support for AverMedia DVD EZMaker 7

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: cx231xx: Add support for AverMedia DVD EZMaker 7 Author: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Date: Mon Mar 26 02:06:16 2018 -0400 User reports AverMedia DVD EZMaker 7 can be driven by VIDEO_GRABBER. Add the device to the id_table to make it work. BugLink: https://bugs.launchpad.net/bugs/1620762 Cc: stable(a)vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Signed-off-by: Hans Verkuil <hansverk(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> drivers/media/usb/cx231xx/cx231xx-cards.c | 3 +++ 1 file changed, 3 insertions(+) --- diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index c76b2101193c..89795d4d0a71 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -1024,6 +1024,9 @@ struct usb_device_id cx231xx_id_table[] = { .driver_info = CX231XX_BOARD_CNXT_RDE_250}, {USB_DEVICE(0x0572, 0x58A0), .driver_info = CX231XX_BOARD_CNXT_RDU_250}, + /* AverMedia DVD EZMaker 7 */ + {USB_DEVICE(0x07ca, 0xc039), + .driver_info = CX231XX_BOARD_CNXT_VIDEO_GRABBER}, {USB_DEVICE(0x2040, 0xb110), .driver_info = CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL}, {USB_DEVICE(0x2040, 0xb111),

7 years, 6 months

1
0
0 0

[git:media_tree/fixes] media: cx231xx: Add support for AverMedia DVD EZMaker 7

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: cx231xx: Add support for AverMedia DVD EZMaker 7 Author: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Date: Mon Mar 26 02:06:16 2018 -0400 User reports AverMedia DVD EZMaker 7 can be driven by VIDEO_GRABBER. Add the device to the id_table to make it work. BugLink: https://bugs.launchpad.net/bugs/1620762 Cc: stable(a)vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Signed-off-by: Hans Verkuil <hansverk(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> drivers/media/usb/cx231xx/cx231xx-cards.c | 3 +++ 1 file changed, 3 insertions(+) --- diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index c76b2101193c..89795d4d0a71 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -1024,6 +1024,9 @@ struct usb_device_id cx231xx_id_table[] = { .driver_info = CX231XX_BOARD_CNXT_RDE_250}, {USB_DEVICE(0x0572, 0x58A0), .driver_info = CX231XX_BOARD_CNXT_RDU_250}, + /* AverMedia DVD EZMaker 7 */ + {USB_DEVICE(0x07ca, 0xc039), + .driver_info = CX231XX_BOARD_CNXT_VIDEO_GRABBER}, {USB_DEVICE(0x2040, 0xb110), .driver_info = CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL}, {USB_DEVICE(0x2040, 0xb111),

7 years, 6 months

1
0
0 0

[git:media_tree/master] media: cx231xx: Add support for AverMedia DVD EZMaker 7

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: cx231xx: Add support for AverMedia DVD EZMaker 7 Author: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Date: Mon Mar 26 02:06:16 2018 -0400 User reports AverMedia DVD EZMaker 7 can be driven by VIDEO_GRABBER. Add the device to the id_table to make it work. BugLink: https://bugs.launchpad.net/bugs/1620762 Cc: stable(a)vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Signed-off-by: Hans Verkuil <hansverk(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> drivers/media/usb/cx231xx/cx231xx-cards.c | 3 +++ 1 file changed, 3 insertions(+) --- diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index c76b2101193c..89795d4d0a71 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -1024,6 +1024,9 @@ struct usb_device_id cx231xx_id_table[] = { .driver_info = CX231XX_BOARD_CNXT_RDE_250}, {USB_DEVICE(0x0572, 0x58A0), .driver_info = CX231XX_BOARD_CNXT_RDU_250}, + /* AverMedia DVD EZMaker 7 */ + {USB_DEVICE(0x07ca, 0xc039), + .driver_info = CX231XX_BOARD_CNXT_VIDEO_GRABBER}, {USB_DEVICE(0x2040, 0xb110), .driver_info = CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL}, {USB_DEVICE(0x2040, 0xb111),

7 years, 6 months

1
0
0 0

Request: xen-netfront: Fix hang on device removal

by Jason Andryuk

xen-netfront: Fix hang on device removal commit c2d2e6738a209f0f9dffa2dc8e7292fc45360d61 upstream The linux kernel can hang in xen-netfront device removal preventing system shutdown and power-off. This patch fixes xen-netfront so it does not hang and shutdown can complete. This is applicable to 4.1+ and has been tested on 4.4 and 4.14. Regards, Jason

7 years, 6 months

3
3
0 0

v4.9.95 build: 11 failures 0 warnings (v4.9.95)

by Build bot for Mark Brown

Tree/Branch: v4.9.95 Git describe: v4.9.95 Commit: eedaf21fb3 Linux 4.9.95 Build Time: 0 min 26 sec Passed: 0 / 11 ( 0.00 %) Failed: 11 / 11 (100.00 %) Errors: 1 Warnings: 0 Section Mismatches: 0 Failed defconfigs: arm-allnoconfig arm64-defconfig Errors: arm-allnoconfig collect2: error: ld returned 1 exit status arm64-defconfig collect2: error: ld returned 1 exit status ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- Errors summary: 1 2 collect2: error: ld returned 1 exit status =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm-allnoconfig : FAIL, 1 errors, 0 warnings, 0 section mismatches Errors: collect2: error: ld returned 1 exit status ------------------------------------------------------------------------------- arm64-defconfig : FAIL, 1 errors, 0 warnings, 0 section mismatches Errors: collect2: error: ld returned 1 exit status ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-multi_v4t_defconfig x86_64-allnoconfig x86_64-allmodconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

7 years, 6 months

3
2
0 0

FAILED: patch "[PATCH] CIFS: implement v3.11 preauth integrity" failed to apply to 4.16-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.16-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 8bd68c6e47abff34e412a0c68cecb4a36bf0198b Mon Sep 17 00:00:00 2001 From: Aurelien Aptel <aaptel(a)suse.com> Date: Fri, 16 Feb 2018 19:19:29 +0100 Subject: [PATCH] CIFS: implement v3.11 preauth integrity SMB3.11 clients must implement pre-authentification integrity. * new mechanism to certify requests/responses happening before Tree Connect. * supersedes VALIDATE_NEGOTIATE * fixes signing for SMB3.11 Signed-off-by: Aurelien Aptel <aaptel(a)suse.com> Signed-off-by: Steve French <smfrench(a)gmail.com> CC: Stable <stable(a)vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber(a)redhat.com> diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 765fc2c9fd91..c294093f04d5 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -675,7 +675,8 @@ struct TCP_Server_Info { unsigned int max_read; unsigned int max_write; #ifdef CONFIG_CIFS_SMB311 - __u8 preauth_sha_hash[64]; /* save initital negprot hash */ + /* save initital negprot hash */ + __u8 preauth_sha_hash[SMB2_PREAUTH_HASH_SIZE]; #endif /* 3.1.1 */ struct delayed_work reconnect; /* reconnect workqueue job */ struct mutex reconnect_mutex; /* prevent simultaneous reconnects */ @@ -864,7 +865,7 @@ struct cifs_ses { __u8 smb3encryptionkey[SMB3_SIGN_KEY_SIZE]; __u8 smb3decryptionkey[SMB3_SIGN_KEY_SIZE]; #ifdef CONFIG_CIFS_SMB311 - __u8 preauth_sha_hash[64]; + __u8 preauth_sha_hash[SMB2_PREAUTH_HASH_SIZE]; #endif /* 3.1.1 */ }; diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c index 76d03abaa38c..da012c3ab700 100644 --- a/fs/cifs/smb2misc.c +++ b/fs/cifs/smb2misc.c @@ -706,3 +706,67 @@ smb2_handle_cancelled_mid(char *buffer, struct TCP_Server_Info *server) return 0; } + +#ifdef CONFIG_CIFS_SMB311 +/** + * smb311_update_preauth_hash - update @ses hash with the packet data in @iov + * + * Assumes @iov does not contain the rfc1002 length and iov[0] has the + * SMB2 header. + */ +int +smb311_update_preauth_hash(struct cifs_ses *ses, struct kvec *iov, int nvec) +{ + int i, rc; + struct sdesc *d; + struct smb2_sync_hdr *hdr; + + if (ses->server->tcpStatus == CifsGood) { + /* skip non smb311 connections */ + if (ses->server->dialect != SMB311_PROT_ID) + return 0; + + /* skip last sess setup response */ + hdr = (struct smb2_sync_hdr *)iov[0].iov_base; + if (hdr->Flags & SMB2_FLAGS_SIGNED) + return 0; + } + + rc = smb311_crypto_shash_allocate(ses->server); + if (rc) + return rc; + + d = ses->server->secmech.sdescsha512; + rc = crypto_shash_init(&d->shash); + if (rc) { + cifs_dbg(VFS, "%s: could not init sha512 shash\n", __func__); + return rc; + } + + rc = crypto_shash_update(&d->shash, ses->preauth_sha_hash, + SMB2_PREAUTH_HASH_SIZE); + if (rc) { + cifs_dbg(VFS, "%s: could not update sha512 shash\n", __func__); + return rc; + } + + for (i = 0; i < nvec; i++) { + rc = crypto_shash_update(&d->shash, + iov[i].iov_base, iov[i].iov_len); + if (rc) { + cifs_dbg(VFS, "%s: could not update sha512 shash\n", + __func__); + return rc; + } + } + + rc = crypto_shash_final(&d->shash, ses->preauth_sha_hash); + if (rc) { + cifs_dbg(VFS, "%s: could not finalize sha512 shash\n", + __func__); + return rc; + } + + return 0; +} +#endif diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index ab4c20687cc0..4b6920de2541 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -453,6 +453,10 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) return rc; req->sync_hdr.SessionId = 0; +#ifdef CONFIG_CIFS_SMB311 + memset(server->preauth_sha_hash, 0, SMB2_PREAUTH_HASH_SIZE); + memset(ses->preauth_sha_hash, 0, SMB2_PREAUTH_HASH_SIZE); +#endif if (strcmp(ses->server->vals->version_string, SMB3ANY_VERSION_STRING) == 0) { @@ -564,6 +568,15 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) /* BB: add check that dialect was valid given dialect(s) we asked for */ +#ifdef CONFIG_CIFS_SMB311 + /* + * Keep a copy of the hash after negprot. This hash will be + * the starting hash value for all sessions made from this + * server. + */ + memcpy(server->preauth_sha_hash, ses->preauth_sha_hash, + SMB2_PREAUTH_HASH_SIZE); +#endif /* SMB2 only has an extended negflavor */ server->negflavor = CIFS_NEGFLAVOR_EXTENDED; /* set it to the maximum buffer size value we can send with 1 credit */ @@ -621,6 +634,10 @@ int smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon) return 0; #endif + /* In SMB3.11 preauth integrity supersedes validate negotiate */ + if (tcon->ses->server->dialect == SMB311_PROT_ID) + return 0; + /* * validation ioctl must be signed, so no point sending this if we * can not sign it (ie are not known user). Even if signing is not @@ -1148,6 +1165,14 @@ SMB2_sess_setup(const unsigned int xid, struct cifs_ses *ses, sess_data->buf0_type = CIFS_NO_BUFFER; sess_data->nls_cp = (struct nls_table *) nls_cp; +#ifdef CONFIG_CIFS_SMB311 + /* + * Initialize the session hash with the server one. + */ + memcpy(ses->preauth_sha_hash, ses->server->preauth_sha_hash, + SMB2_PREAUTH_HASH_SIZE); +#endif + while (sess_data->func) sess_data->func(sess_data); diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index 2a2b34ccaf49..8b901c69a65a 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -264,6 +264,7 @@ struct smb2_negotiate_req { #define SMB311_SALT_SIZE 32 /* Hash Algorithm Types */ #define SMB2_PREAUTH_INTEGRITY_SHA512 cpu_to_le16(0x0001) +#define SMB2_PREAUTH_HASH_SIZE 64 struct smb2_preauth_neg_context { __le16 ContextType; /* 1 */ diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h index 3b8e9c2e55bc..cbcce3f7e86f 100644 --- a/fs/cifs/smb2proto.h +++ b/fs/cifs/smb2proto.h @@ -204,5 +204,7 @@ extern enum securityEnum smb2_select_sectype(struct TCP_Server_Info *, enum securityEnum); #ifdef CONFIG_CIFS_SMB311 extern int smb311_crypto_shash_allocate(struct TCP_Server_Info *server); +extern int smb311_update_preauth_hash(struct cifs_ses *ses, + struct kvec *iov, int nvec); #endif #endif /* _SMB2PROTO_H */ diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 9779b3292d8e..665661464067 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -37,6 +37,7 @@ #include "cifsglob.h" #include "cifsproto.h" #include "cifs_debug.h" +#include "smb2proto.h" #include "smbdirect.h" /* Max number of iovectors we can use off the stack when sending requests. */ @@ -751,6 +752,12 @@ cifs_send_recv(const unsigned int xid, struct cifs_ses *ses, if (rc < 0) goto out; +#ifdef CONFIG_CIFS_SMB311 + if (ses->status == CifsNew) + smb311_update_preauth_hash(ses, rqst->rq_iov+1, + rqst->rq_nvec-1); +#endif + if (timeout == CIFS_ASYNC_OP) goto out; @@ -789,6 +796,16 @@ cifs_send_recv(const unsigned int xid, struct cifs_ses *ses, else *resp_buf_type = CIFS_SMALL_BUFFER; +#ifdef CONFIG_CIFS_SMB311 + if (ses->status == CifsNew) { + struct kvec iov = { + .iov_base = buf + 4, + .iov_len = get_rfc1002_length(buf) + }; + smb311_update_preauth_hash(ses, &iov, 1); + } +#endif + credits = ses->server->ops->get_credits(midQ); rc = ses->server->ops->check_receive(midQ, ses->server,

7 years, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror