- Linux-stable-mirror - lists.linaro.org

[PATCH 3/5] sd_zbc: Log zone reset failures

by Bart Van Assche

A zone reset only fails for conventional zones. Resetting a conventional zone indicates a bug in the software that submitted the zone reset so the information about a zone reset failure is useful information. Hence, do not suppress information about zone reset failures. Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Damien Le Moal <damien.lemoal(a)wdc.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org --- drivers/scsi/sd_zbc.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index 2d0c06f7db3e..f290e8a9923d 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -284,18 +284,6 @@ void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes, switch (req_op(rq)) { case REQ_OP_ZONE_RESET: - - if (result && - sshdr->sense_key == ILLEGAL_REQUEST && - sshdr->asc == 0x24) - /* - * INVALID FIELD IN CDB error: reset of a conventional - * zone was attempted. Nothing to worry about, so be - * quiet about the error. - */ - rq->rq_flags |= RQF_QUIET; - break; - case REQ_OP_WRITE: case REQ_OP_WRITE_ZEROES: case REQ_OP_WRITE_SAME: -- 2.16.3

7 years, 6 months

1
0
0 0

[PATCH 2/5] sd_zbc: Let the SCSI core handle ILLEGAL REQUEST / ASC 0x21

by Bart Van Assche

scsi_io_completion() translates the sense key ILLEGAL REQUEST / ASC 0x21 into ACTION_FAIL. That means that setting cmd->allowed to zero in sd_zbc_complete() for this sense code / ASC combination is not necessary. Hence remove the code that resets cmd->allowed from sd_zbc_complete(). Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Damien Le Moal <damien.lemoal(a)wdc.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org --- drivers/scsi/sd_zbc.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index 41df75eea57b..2d0c06f7db3e 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -299,16 +299,6 @@ void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes, case REQ_OP_WRITE: case REQ_OP_WRITE_ZEROES: case REQ_OP_WRITE_SAME: - - if (result && - sshdr->sense_key == ILLEGAL_REQUEST && - sshdr->asc == 0x21) - /* - * INVALID ADDRESS FOR WRITE error: It is unlikely that - * retrying write requests failed with any kind of - * alignement error will result in success. So don't. - */ - cmd->allowed = 0; break; case REQ_OP_ZONE_REPORT: -- 2.16.3

7 years, 6 months

1
0
0 0

[PATCH 1/5] sd_zbc: Change the type of the ZBC fields into u32

by Bart Van Assche

This patch does not change any functionality but makes it clear that it is on purpose that these fields are 32 bits wide. Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Damien Le Moal <damien.lemoal(a)wdc.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org --- drivers/scsi/sd.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 0d663b5e45bb..392c7d078ae3 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -74,12 +74,12 @@ struct scsi_disk { struct gendisk *disk; struct opal_dev *opal_dev; #ifdef CONFIG_BLK_DEV_ZONED - unsigned int nr_zones; - unsigned int zone_blocks; - unsigned int zone_shift; - unsigned int zones_optimal_open; - unsigned int zones_optimal_nonseq; - unsigned int zones_max_open; + u32 nr_zones; + u32 zone_blocks; + u32 zone_shift; + u32 zones_optimal_open; + u32 zones_optimal_nonseq; + u32 zones_max_open; #endif atomic_t openers; sector_t capacity; /* size in logical blocks */ -- 2.16.3

7 years, 6 months

1
0
0 0

[PATCH 24/24] x86/spectre_v2: Don't check microcode versions when running under hypervisors

by Youquan Song

From: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> (cherry picked from commit 36268223c1e9981d6cfc33aff8520b3bde4b8114) As: 1) It's known that hypervisors lie about the environment anyhow (host mismatch) 2) Even if the hypervisor (Xen, KVM, VMWare, etc) provided a valid "correct" value, it all gets to be very murky when migration happens (do you provide the "new" microcode of the machine?). And in reality the cloud vendors are the ones that should make sure that the microcode that is running is correct and we should just sing lalalala and trust them. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Reviewed-by: Paolo Bonzini <pbonzini(a)redhat.com> Cc: Wanpeng Li <kernellwp(a)gmail.com> Cc: kvm <kvm(a)vger.kernel.org> Cc: Krčmář <rkrcmar(a)redhat.com> Cc: Borislav Petkov <bp(a)alien8.de> CC: "H. Peter Anvin" <hpa(a)zytor.com> CC: stable(a)vger.kernel.org Link: https://lkml.kernel.org/r/20180226213019.GE9497@char.us.oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> [Yi Sun: port to 4.4] Signed-off-by: Yi Sun <yi.y.sun(a)linux.intel.com> --- arch/x86/kernel/cpu/intel.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index af28610..221c030 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -71,6 +71,13 @@ static bool bad_spectre_microcode(struct cpuinfo_x86 *c) { int i; + /* + * We know that the hypervisor lie to us on the microcode version so + * we may as well hope that it is running the correct version. + */ + if (cpu_has(c, X86_FEATURE_HYPERVISOR)) + return false; + for (i = 0; i < ARRAY_SIZE(spectre_bad_microcodes); i++) { if (c->x86_model == spectre_bad_microcodes[i].model && c->x86_mask == spectre_bad_microcodes[i].stepping) -- 1.9.1

7 years, 6 months

1
0
0 0

[PATCH 23/23] KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()

by Youquan Song

From: Paolo Bonzini <pbonzini(a)redhat.com> commit 946fbbc13dce68902f64515b610eeb2a6c3d7a64 upstream. vmx_vcpu_run() and svm_vcpu_run() are large functions, and giving branch hints to the compiler can actually make a substantial cycle difference by keeping the fast path contiguous in memory. With this optimization, the retpoline-guest/retpoline-host case is about 50 cycles faster. Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Reviewed-by: Jim Mattson <jmattson(a)google.com> Cc: David Woodhouse <dwmw(a)amazon.co.uk> Cc: KarimAllah Ahmed <karahmed(a)amazon.de> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Radim Krčmář <rkrcmar(a)redhat.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: kvm(a)vger.kernel.org Cc: stable(a)vger.kernel.org Link: http://lkml.kernel.org/r/20180222154318.20361-3-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> [Yi Sun: cherry pick to 4.4] Signed-off-by: Yi Sun <yi.y.sun(a)linux.intel.com> --- arch/x86/kvm/svm.c | 2 +- arch/x86/kvm/vmx.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index cb46661..35da1e2 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -4017,7 +4017,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu) * If the L02 MSR bitmap does not intercept the MSR, then we need to * save it. */ - if (!msr_write_intercepted(vcpu, MSR_IA32_SPEC_CTRL)) + if (unlikely(!msr_write_intercepted(vcpu, MSR_IA32_SPEC_CTRL))) svm->spec_ctrl = native_read_msr(MSR_IA32_SPEC_CTRL); if (svm->spec_ctrl) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 6c109df..1f165cc 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -8743,7 +8743,7 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) * If the L02 MSR bitmap does not intercept the MSR, then we need to * save it. */ - if (!msr_write_intercepted(vcpu, MSR_IA32_SPEC_CTRL)) + if (unlikely(!msr_write_intercepted(vcpu, MSR_IA32_SPEC_CTRL))) vmx->spec_ctrl = native_read_msr(MSR_IA32_SPEC_CTRL); if (vmx->spec_ctrl) -- 1.9.1

7 years, 6 months

1
0
0 0

[PATCH 22/23] KVM/x86: Remove indirect MSR op calls from SPEC_CTRL

by Youquan Song

From: Paolo Bonzini <pbonzini(a)redhat.com> commit ecb586bd29c99fb4de599dec388658e74388daad upstream. Having a paravirt indirect call in the IBRS restore path is not a good idea, since we are trying to protect from speculative execution of bogus indirect branch targets. It is also slower, so use native_wrmsrl() on the vmentry path too. Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Reviewed-by: Jim Mattson <jmattson(a)google.com> Cc: David Woodhouse <dwmw(a)amazon.co.uk> Cc: KarimAllah Ahmed <karahmed(a)amazon.de> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Radim Krčmář <rkrcmar(a)redhat.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: kvm(a)vger.kernel.org Cc: stable(a)vger.kernel.org Fixes: d28b387fb74da95d69d2615732f50cceb38e9a4d Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> [Yi Sun: port to 4.4] Signed-off-by: Yi Sun <yi.y.sun(a)linux.intel.com> Conflicts: arch/x86/kvm/svm.c --- arch/x86/kvm/svm.c | 7 ++++--- arch/x86/kvm/vmx.c | 7 ++++--- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 08d42a9..cb46661 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -37,6 +37,7 @@ #include <asm/desc.h> #include <asm/debugreg.h> #include <asm/kvm_para.h> +#include <asm/microcode.h> #include <asm/nospec-branch.h> #include <asm/virtext.h> @@ -3907,7 +3908,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu) * being speculatively taken. */ if (svm->spec_ctrl) - wrmsrl(MSR_IA32_SPEC_CTRL, svm->spec_ctrl); + native_wrmsrl(MSR_IA32_SPEC_CTRL, svm->spec_ctrl); asm volatile ( "push %%" _ASM_BP "; \n\t" @@ -4017,10 +4018,10 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu) * save it. */ if (!msr_write_intercepted(vcpu, MSR_IA32_SPEC_CTRL)) - rdmsrl(MSR_IA32_SPEC_CTRL, svm->spec_ctrl); + svm->spec_ctrl = native_read_msr(MSR_IA32_SPEC_CTRL); if (svm->spec_ctrl) - wrmsrl(MSR_IA32_SPEC_CTRL, 0); + native_wrmsrl(MSR_IA32_SPEC_CTRL, 0); /* Eliminate branch target predictions from guest mode */ vmexit_fill_RSB(); diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 618174b..6c109df 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -48,6 +48,7 @@ #include <asm/kexec.h> #include <asm/apic.h> #include <asm/irq_remapping.h> +#include <asm/microcode.h> #include <asm/nospec-branch.h> #include "trace.h" @@ -8607,7 +8608,7 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) * being speculatively taken. */ if (vmx->spec_ctrl) - wrmsrl(MSR_IA32_SPEC_CTRL, vmx->spec_ctrl); + native_wrmsrl(MSR_IA32_SPEC_CTRL, vmx->spec_ctrl); vmx->__launched = vmx->loaded_vmcs->launched; asm( @@ -8743,10 +8744,10 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) * save it. */ if (!msr_write_intercepted(vcpu, MSR_IA32_SPEC_CTRL)) - rdmsrl(MSR_IA32_SPEC_CTRL, vmx->spec_ctrl); + vmx->spec_ctrl = native_read_msr(MSR_IA32_SPEC_CTRL); if (vmx->spec_ctrl) - wrmsrl(MSR_IA32_SPEC_CTRL, 0); + native_wrmsrl(MSR_IA32_SPEC_CTRL, 0); /* Eliminate branch target predictions from guest mode */ vmexit_fill_RSB(); -- 1.9.1

7 years, 6 months

1
0
0 0

[PATCH 01/24] x86/cpufeatures: Add CPUID_7_EDX CPUID leaf

by Youquan Song

From: David Woodhouse <dwmw(a)amazon.co.uk> (cherry picked from commit 95ca0ee8636059ea2800dfbac9ecac6212d6b38f) This is a pure feature bits leaf. There are two AVX512 feature bits in it already which were handled as scattered bits, and three more from this leaf are going to be added for speculation control features. Signed-off-by: David Woodhouse <dwmw(a)amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Reviewed-by: Borislav Petkov <bp(a)suse.de> Cc: gnomes(a)lxorguk.ukuu.org.uk Cc: ak(a)linux.intel.com Cc: ashok.raj(a)intel.com Cc: dave.hansen(a)intel.com Cc: karahmed(a)amazon.de Cc: arjan(a)linux.intel.com Cc: torvalds(a)linux-foundation.org Cc: peterz(a)infradead.org Cc: bp(a)alien8.de Cc: pbonzini(a)redhat.com Cc: tim.c.chen(a)linux.intel.com Cc: gregkh(a)linux-foundation.org Link: https://lkml.kernel.org/r/1516896855-7642-2-git-send-email-dwmw@amazon.co.uk Signed-off-by: David Woodhouse <dwmw(a)amazon.co.uk> Signed-off-by: Youquan Song <youquan.song(a)linux.intel.com> [v4.4 backport] --- arch/x86/include/asm/cpufeature.h | 2 +- arch/x86/kernel/cpu/common.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 641f0f2..3d2556c 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -12,7 +12,7 @@ #include <asm/disabled-features.h> #endif -#define NCAPINTS 14 /* N 32-bit words worth of info */ +#define NCAPINTS 15 /* N 32-bit words worth of info */ #define NBUGINTS 1 /* N 32-bit bug flags */ /* diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 8eabbaf..a97ed10 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -695,6 +695,7 @@ void get_cpu_cap(struct cpuinfo_x86 *c) cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx); c->x86_capability[9] = ebx; + c->x86_capability[14] = edx; } /* Extended state features: level 0x0000000d */ -- 1.8.3.1

7 years, 6 months

2
24
0 0

[PATCH v2 1/2] pinctrl/samsung: Correct EINTG banks order

by Paweł Chmiel

All banks with GPIO interrupts should be at beginning of bank array and without any other types of banks between them. This order is expected by exynos_eint_gpio_irq, when doing interrupt group to bank translation. Otherwise, kernel NULL pointer dereference would happen when trying to handle interrupt, due to wrong bank being looked up. Observed on s5pv210, when trying to handle gpj0 interrupt, where kernel was mapping it to gpi bank. Cc: stable(a)vger.kernel.org Fixes: cfa76ddf5b3aad642cc904daa3d3784cbb5f2d57 ("pinctrl: samsung: Split Exynos drivers per ARMv7 and ARMv8") Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel(a)gmail.com> --- Changes from v1: - Limit changes to s5pv210 and Exynos5410. Exynos3250 will be handled later. --- drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c index 90c2744..4f4ae66 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c @@ -105,12 +105,12 @@ static const struct samsung_pin_bank_data s5pv210_pin_bank[] __initconst = { EXYNOS_PIN_BANK_EINTG(7, 0x1c0, "gpg1", 0x38), EXYNOS_PIN_BANK_EINTG(7, 0x1e0, "gpg2", 0x3c), EXYNOS_PIN_BANK_EINTG(7, 0x200, "gpg3", 0x40), - EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"), EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x44), EXYNOS_PIN_BANK_EINTG(6, 0x260, "gpj1", 0x48), EXYNOS_PIN_BANK_EINTG(8, 0x280, "gpj2", 0x4c), EXYNOS_PIN_BANK_EINTG(8, 0x2a0, "gpj3", 0x50), EXYNOS_PIN_BANK_EINTG(5, 0x2c0, "gpj4", 0x54), + EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"), EXYNOS_PIN_BANK_EINTN(8, 0x2e0, "mp01"), EXYNOS_PIN_BANK_EINTN(4, 0x300, "mp02"), EXYNOS_PIN_BANK_EINTN(8, 0x320, "mp03"), @@ -630,7 +630,6 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc3", 0x20), EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc1", 0x24), EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc2", 0x28), - EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"), EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x2c), EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpe0", 0x30), EXYNOS_PIN_BANK_EINTG(2, 0x1C0, "gpe1", 0x34), @@ -641,6 +640,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = EXYNOS_PIN_BANK_EINTG(2, 0x260, "gpg2", 0x48), EXYNOS_PIN_BANK_EINTG(4, 0x280, "gph0", 0x4c), EXYNOS_PIN_BANK_EINTG(8, 0x2A0, "gph1", 0x50), + EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"), EXYNOS_PIN_BANK_EINTN(8, 0x2C0, "gpm7"), EXYNOS_PIN_BANK_EINTN(6, 0x2E0, "gpy0"), EXYNOS_PIN_BANK_EINTN(4, 0x300, "gpy1"), -- 2.7.4

7 years, 6 months

1
1
0 0

[PATCH v2 2/2] pinctrl/samsung: Document required order of banks

by Paweł Chmiel

This patch documents requirement coming from the way exynos_eint_gpio_irq() is working now, which expects EINTG banks to be at the beginning of the bank arrays. Cc: stable(a)vger.kernel.org Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel(a)gmail.com> --- drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 26 ++++++++++++++++++++++++++ drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 20 ++++++++++++++++++++ 2 files changed, 46 insertions(+) diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c index 4f4ae66..d82820f 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c @@ -88,6 +88,7 @@ static const struct samsung_retention_data s5pv210_retention_data __initconst = /* pin banks of s5pv210 pin-controller */ static const struct samsung_pin_bank_data s5pv210_pin_bank[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpa1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), @@ -147,6 +148,7 @@ static atomic_t exynos_shared_retention_refcnt; /* pin banks of exynos3250 pin-controller 0 */ static const struct samsung_pin_bank_data exynos3250_pin_banks0[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), @@ -158,6 +160,7 @@ static const struct samsung_pin_bank_data exynos3250_pin_banks0[] __initconst = /* pin banks of exynos3250 pin-controller 1 */ static const struct samsung_pin_bank_data exynos3250_pin_banks1[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTN(8, 0x120, "gpe0"), EXYNOS_PIN_BANK_EINTN(8, 0x140, "gpe1"), EXYNOS_PIN_BANK_EINTN(3, 0x180, "gpe2"), @@ -232,6 +235,7 @@ const struct samsung_pinctrl_of_match_data exynos3250_of_data __initconst = { /* pin banks of exynos4210 pin-controller 0 */ static const struct samsung_pin_bank_data exynos4210_pin_banks0[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), @@ -252,6 +256,7 @@ static const struct samsung_pin_bank_data exynos4210_pin_banks0[] __initconst = /* pin banks of exynos4210 pin-controller 1 */ static const struct samsung_pin_bank_data exynos4210_pin_banks1[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00), EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04), EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08), @@ -276,6 +281,7 @@ static const struct samsung_pin_bank_data exynos4210_pin_banks1[] __initconst = /* pin banks of exynos4210 pin-controller 2 */ static const struct samsung_pin_bank_data exynos4210_pin_banks2[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"), }; @@ -346,6 +352,7 @@ const struct samsung_pinctrl_of_match_data exynos4210_of_data __initconst = { /* pin banks of exynos4x12 pin-controller 0 */ static const struct samsung_pin_bank_data exynos4x12_pin_banks0[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), @@ -363,6 +370,7 @@ static const struct samsung_pin_bank_data exynos4x12_pin_banks0[] __initconst = /* pin banks of exynos4x12 pin-controller 1 */ static const struct samsung_pin_bank_data exynos4x12_pin_banks1[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08), EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c), EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10), @@ -390,11 +398,13 @@ static const struct samsung_pin_bank_data exynos4x12_pin_banks1[] __initconst = /* pin banks of exynos4x12 pin-controller 2 */ static const struct samsung_pin_bank_data exynos4x12_pin_banks2[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00), }; /* pin banks of exynos4x12 pin-controller 3 */ static const struct samsung_pin_bank_data exynos4x12_pin_banks3[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00), EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpv2", 0x08), @@ -449,6 +459,7 @@ const struct samsung_pinctrl_of_match_data exynos4x12_of_data __initconst = { /* pin banks of exynos5250 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5250_pin_banks0[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08), @@ -478,6 +489,7 @@ static const struct samsung_pin_bank_data exynos5250_pin_banks0[] __initconst = /* pin banks of exynos5250 pin-controller 1 */ static const struct samsung_pin_bank_data exynos5250_pin_banks1[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00), EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04), EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpf0", 0x08), @@ -491,6 +503,7 @@ static const struct samsung_pin_bank_data exynos5250_pin_banks1[] __initconst = /* pin banks of exynos5250 pin-controller 2 */ static const struct samsung_pin_bank_data exynos5250_pin_banks2[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00), EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08), @@ -500,6 +513,7 @@ static const struct samsung_pin_bank_data exynos5250_pin_banks2[] __initconst = /* pin banks of exynos5250 pin-controller 3 */ static const struct samsung_pin_bank_data exynos5250_pin_banks3[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00), }; @@ -550,6 +564,7 @@ const struct samsung_pinctrl_of_match_data exynos5250_of_data __initconst = { /* pin banks of exynos5260 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5260_pin_banks0[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpa0", 0x00), EXYNOS_PIN_BANK_EINTG(7, 0x020, "gpa1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08), @@ -575,6 +590,7 @@ static const struct samsung_pin_bank_data exynos5260_pin_banks0[] __initconst = /* pin banks of exynos5260 pin-controller 1 */ static const struct samsung_pin_bank_data exynos5260_pin_banks1[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpc0", 0x00), EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpc1", 0x04), EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpc2", 0x08), @@ -584,6 +600,7 @@ static const struct samsung_pin_bank_data exynos5260_pin_banks1[] __initconst = /* pin banks of exynos5260 pin-controller 2 */ static const struct samsung_pin_bank_data exynos5260_pin_banks2[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00), EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04), }; @@ -619,6 +636,7 @@ const struct samsung_pinctrl_of_match_data exynos5260_of_data __initconst = { /* pin banks of exynos5410 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08), @@ -658,6 +676,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = /* pin banks of exynos5410 pin-controller 1 */ static const struct samsung_pin_bank_data exynos5410_pin_banks1[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpj0", 0x00), EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpj1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpj2", 0x08), @@ -671,6 +690,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks1[] __initconst = /* pin banks of exynos5410 pin-controller 2 */ static const struct samsung_pin_bank_data exynos5410_pin_banks2[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00), EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08), @@ -680,6 +700,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks2[] __initconst = /* pin banks of exynos5410 pin-controller 3 */ static const struct samsung_pin_bank_data exynos5410_pin_banks3[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00), }; @@ -727,6 +748,7 @@ const struct samsung_pinctrl_of_match_data exynos5410_of_data __initconst = { /* pin banks of exynos5420 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5420_pin_banks0[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpy7", 0x00), EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), @@ -736,6 +758,7 @@ static const struct samsung_pin_bank_data exynos5420_pin_banks0[] __initconst = /* pin banks of exynos5420 pin-controller 1 */ static const struct samsung_pin_bank_data exynos5420_pin_banks1[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpc0", 0x00), EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpc1", 0x04), EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpc2", 0x08), @@ -753,6 +776,7 @@ static const struct samsung_pin_bank_data exynos5420_pin_banks1[] __initconst = /* pin banks of exynos5420 pin-controller 2 */ static const struct samsung_pin_bank_data exynos5420_pin_banks2[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00), EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04), EXYNOS_PIN_BANK_EINTG(6, 0x040, "gpf0", 0x08), @@ -765,6 +789,7 @@ static const struct samsung_pin_bank_data exynos5420_pin_banks2[] __initconst = /* pin banks of exynos5420 pin-controller 3 */ static const struct samsung_pin_bank_data exynos5420_pin_banks3[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08), @@ -778,6 +803,7 @@ static const struct samsung_pin_bank_data exynos5420_pin_banks3[] __initconst = /* pin banks of exynos5420 pin-controller 4 */ static const struct samsung_pin_bank_data exynos5420_pin_banks4[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00), }; diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c index 71c9d1d..b6e5642 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c @@ -45,6 +45,7 @@ static atomic_t exynos_shared_retention_refcnt; /* pin banks of exynos5433 pin-controller - ALIVE */ static const struct samsung_pin_bank_data exynos5433_pin_banks0[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS5433_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00), EXYNOS5433_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04), EXYNOS5433_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08), @@ -58,27 +59,32 @@ static const struct samsung_pin_bank_data exynos5433_pin_banks0[] __initconst = /* pin banks of exynos5433 pin-controller - AUD */ static const struct samsung_pin_bank_data exynos5433_pin_banks1[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS5433_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00), EXYNOS5433_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04), }; /* pin banks of exynos5433 pin-controller - CPIF */ static const struct samsung_pin_bank_data exynos5433_pin_banks2[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS5433_PIN_BANK_EINTG(2, 0x000, "gpv6", 0x00), }; /* pin banks of exynos5433 pin-controller - eSE */ static const struct samsung_pin_bank_data exynos5433_pin_banks3[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj2", 0x00), }; /* pin banks of exynos5433 pin-controller - FINGER */ static const struct samsung_pin_bank_data exynos5433_pin_banks4[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS5433_PIN_BANK_EINTG(4, 0x000, "gpd5", 0x00), }; /* pin banks of exynos5433 pin-controller - FSYS */ static const struct samsung_pin_bank_data exynos5433_pin_banks5[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gph1", 0x00), EXYNOS5433_PIN_BANK_EINTG(7, 0x020, "gpr4", 0x04), EXYNOS5433_PIN_BANK_EINTG(5, 0x040, "gpr0", 0x08), @@ -89,16 +95,19 @@ static const struct samsung_pin_bank_data exynos5433_pin_banks5[] __initconst = /* pin banks of exynos5433 pin-controller - IMEM */ static const struct samsung_pin_bank_data exynos5433_pin_banks6[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS5433_PIN_BANK_EINTG(8, 0x000, "gpf0", 0x00), }; /* pin banks of exynos5433 pin-controller - NFC */ static const struct samsung_pin_bank_data exynos5433_pin_banks7[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00), }; /* pin banks of exynos5433 pin-controller - PERIC */ static const struct samsung_pin_bank_data exynos5433_pin_banks8[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gpv7", 0x00), EXYNOS5433_PIN_BANK_EINTG(5, 0x020, "gpb0", 0x04), EXYNOS5433_PIN_BANK_EINTG(8, 0x040, "gpc0", 0x08), @@ -120,6 +129,7 @@ static const struct samsung_pin_bank_data exynos5433_pin_banks8[] __initconst = /* pin banks of exynos5433 pin-controller - TOUCH */ static const struct samsung_pin_bank_data exynos5433_pin_banks9[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00), }; @@ -267,6 +277,7 @@ const struct samsung_pinctrl_of_match_data exynos5433_of_data __initconst = { /* pin banks of exynos7 pin-controller - ALIVE */ static const struct samsung_pin_bank_data exynos7_pin_banks0[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00), EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04), EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08), @@ -275,6 +286,7 @@ static const struct samsung_pin_bank_data exynos7_pin_banks0[] __initconst = { /* pin banks of exynos7 pin-controller - BUS0 */ static const struct samsung_pin_bank_data exynos7_pin_banks1[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00), EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpc0", 0x04), EXYNOS_PIN_BANK_EINTG(2, 0x040, "gpc1", 0x08), @@ -294,31 +306,37 @@ static const struct samsung_pin_bank_data exynos7_pin_banks1[] __initconst = { /* pin banks of exynos7 pin-controller - NFC */ static const struct samsung_pin_bank_data exynos7_pin_banks2[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00), }; /* pin banks of exynos7 pin-controller - TOUCH */ static const struct samsung_pin_bank_data exynos7_pin_banks3[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00), }; /* pin banks of exynos7 pin-controller - FF */ static const struct samsung_pin_bank_data exynos7_pin_banks4[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpg4", 0x00), }; /* pin banks of exynos7 pin-controller - ESE */ static const struct samsung_pin_bank_data exynos7_pin_banks5[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpv7", 0x00), }; /* pin banks of exynos7 pin-controller - FSYS0 */ static const struct samsung_pin_bank_data exynos7_pin_banks6[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpr4", 0x00), }; /* pin banks of exynos7 pin-controller - FSYS1 */ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpr0", 0x00), EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpr1", 0x04), EXYNOS_PIN_BANK_EINTG(5, 0x040, "gpr2", 0x08), @@ -327,6 +345,7 @@ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = { /* pin banks of exynos7 pin-controller - BUS1 */ static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00), EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpf1", 0x04), EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf2", 0x08), @@ -340,6 +359,7 @@ static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = { }; static const struct samsung_pin_bank_data exynos7_pin_banks9[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00), EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04), }; -- 2.7.4

7 years, 6 months

1
0
0 0

[PATCH v2] mfd: twl-core: Fix clock initialization

by Peter Ujfalusi

When looking up the clock we must use the client->dev as device since that is the one which is probed via DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Cc: stable(a)vger.kernel.org # 4.16+ --- Hi, Changes since v1: - Removed the Fixes line and add tag only for v4.16 to avoid possible breakage in pre v4.16. Regards, Peter drivers/mfd/twl-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index d3133a371e27..c649344fd7f2 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -1177,7 +1177,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) twl_priv->ready = true; /* setup clock framework */ - clocks_init(&pdev->dev, pdata ? pdata->clock : NULL); + clocks_init(&client->dev, pdata ? pdata->clock : NULL); /* read TWL IDCODE Register */ if (twl_class_is_4030()) { -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

7 years, 6 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror