- Linux-stable-mirror - lists.linaro.org

Patch "ALSA: hda: Add a power_save blacklist" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: hda: Add a power_save blacklist to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-hda-add-a-power_save-blacklist.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1ba8f9d308174e647b864c36209b4d7934d99888 Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Thu, 22 Feb 2018 14:20:35 +0100 Subject: ALSA: hda: Add a power_save blacklist From: Hans de Goede <hdegoede(a)redhat.com> commit 1ba8f9d308174e647b864c36209b4d7934d99888 upstream. On some boards setting power_save to a non 0 value leads to clicking / popping sounds when ever we enter/leave powersaving mode. Ideally we would figure out how to avoid these sounds, but that is not always feasible. This commit adds a blacklist for devices where powersaving is known to cause problems and disables it on these devices. Note I tried to put this blacklist in userspace first: https://github.com/systemd/systemd/pull/8128 But the systemd maintainers rightfully pointed out that it would be impossible to then later remove entries once we actually find a way to make power-saving work on listed boards without issues. Having this list in the kernel will allow removal of the blacklist entry in the same commit which fixes the clicks / plops. The blacklist only applies to the default power_save module-option value, if a user explicitly sets the module-option then the blacklist is not used. [ added an ifdef CONFIG_PM for the build error -- tiwai] BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611 Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/pci/hda/hda_intel.c | 38 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-) --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -180,7 +180,7 @@ static const struct kernel_param_ops par }; #define param_check_xint param_check_int -static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; +static int power_save = -1; module_param(power_save, xint, 0644); MODULE_PARM_DESC(power_save, "Automatic power-saving timeout " "(in second, 0 = disable)."); @@ -2042,6 +2042,24 @@ out_free: return err; } +#ifdef CONFIG_PM +/* On some boards setting power_save to a non 0 value leads to clicking / + * popping sounds when ever we enter/leave powersaving mode. Ideally we would + * figure out how to avoid these sounds, but that is not always feasible. + * So we keep a list of devices where we disable powersaving as its known + * to causes problems on these devices. + */ +static struct snd_pci_quirk power_save_blacklist[] = { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0), + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0), + /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */ + SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0), + {} +}; +#endif /* CONFIG_PM */ + /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = { [AZX_DRIVER_NVIDIA] = 8, @@ -2054,6 +2072,7 @@ static int azx_probe_continue(struct azx struct hdac_bus *bus = azx_bus(chip); struct pci_dev *pci = chip->pci; int dev = chip->dev_index; + int val; int err; hda->probe_continued = 1; @@ -2129,7 +2148,22 @@ static int azx_probe_continue(struct azx chip->running = 1; azx_add_card_list(chip); - snd_hda_set_power_save(&chip->bus, power_save * 1000); + + val = power_save; +#ifdef CONFIG_PM + if (val == -1) { + const struct snd_pci_quirk *q; + + val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; + q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist); + if (q && val) { + dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n", + q->subvendor, q->subdevice); + val = 0; + } + } +#endif /* CONFIG_PM */ + snd_hda_set_power_save(&chip->bus, val * 1000); if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo) pm_runtime_put_autosuspend(&pci->dev); Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.9/alsa-hda-add-a-power_save-blacklist.patch

7 years, 4 months

1
0
0 0

Patch "cpufreq: s3c24xx: Fix broken s3c_cpufreq_init()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cpufreq-s3c24xx-fix-broken-s3c_cpufreq_init.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 Mon Sep 17 00:00:00 2001 From: Viresh Kumar <viresh.kumar(a)linaro.org> Date: Fri, 23 Feb 2018 09:38:28 +0530 Subject: cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() From: Viresh Kumar <viresh.kumar(a)linaro.org> commit 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 upstream. commit a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" accidentally broke cpufreq on s3c2410 and s3c2412. These two platforms don't have a CPU frequency table and used to skip calling cpufreq_table_validate_and_show() for them. But with the above commit, we started calling it unconditionally and that will eventually fail as the frequency table pointer is NULL. Fix this by calling cpufreq_table_validate_and_show() conditionally again. Fixes: a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" Cc: 3.13+ <stable(a)vger.kernel.org> # v3.13+ Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/cpufreq/s3c24xx-cpufreq.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -364,7 +364,13 @@ struct clk *s3c_cpufreq_clk_get(struct d static int s3c_cpufreq_init(struct cpufreq_policy *policy) { policy->clk = clk_arm; - return cpufreq_generic_init(policy, ftab, cpu_cur.info->latency); + + policy->cpuinfo.transition_latency = cpu_cur.info->latency; + + if (ftab) + return cpufreq_table_validate_and_show(policy, ftab); + + return 0; } static int __init s3c_cpufreq_initclks(void) Patches currently in stable-queue which might be from viresh.kumar(a)linaro.org are queue-4.4/cpufreq-s3c24xx-fix-broken-s3c_cpufreq_init.patch

7 years, 4 months

1
0
0 0

Patch "ALSA: usb-audio: Add a quirck for B&W PX headphones" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: usb-audio: Add a quirck for B&W PX headphones to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-usb-audio-add-a-quirck-for-b-w-px-headphones.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 240a8af929c7c57dcde28682725b29cf8474e8e5 Mon Sep 17 00:00:00 2001 From: Erik Veijola <erik.veijola(a)gmail.com> Date: Fri, 23 Feb 2018 14:06:52 +0200 Subject: ALSA: usb-audio: Add a quirck for B&W PX headphones From: Erik Veijola <erik.veijola(a)gmail.com> commit 240a8af929c7c57dcde28682725b29cf8474e8e5 upstream. The capture interface doesn't work and the playback interface only supports 48 kHz sampling rate even though it advertises more rates. Signed-off-by: Erik Veijola <erik.veijola(a)gmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/usb/quirks-table.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3277,4 +3277,51 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge } }, +{ + /* + * Bower's & Wilkins PX headphones only support the 48 kHz sample rate + * even though it advertises more. The capture interface doesn't work + * even on windows. + */ + USB_DEVICE(0x19b5, 0x0021), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_STANDARD_MIXER, + }, + /* Capture */ + { + .ifnum = 1, + .type = QUIRK_IGNORE_INTERFACE, + }, + /* Playback */ + { + .ifnum = 2, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .channels = 2, + .iface = 2, + .altsetting = 1, + .altset_idx = 1, + .attributes = UAC_EP_CS_ATTR_FILL_MAX | + UAC_EP_CS_ATTR_SAMPLE_RATE, + .endpoint = 0x03, + .ep_attr = USB_ENDPOINT_XFER_ISOC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + } + } +}, + #undef USB_DEVICE_VENDOR_SPEC Patches currently in stable-queue which might be from erik.veijola(a)gmail.com are queue-4.4/alsa-usb-audio-add-a-quirck-for-b-w-px-headphones.patch

7 years, 4 months

1
0
0 0

Patch "ALSA: hda: Add a power_save blacklist" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: hda: Add a power_save blacklist to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-hda-add-a-power_save-blacklist.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1ba8f9d308174e647b864c36209b4d7934d99888 Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Thu, 22 Feb 2018 14:20:35 +0100 Subject: ALSA: hda: Add a power_save blacklist From: Hans de Goede <hdegoede(a)redhat.com> commit 1ba8f9d308174e647b864c36209b4d7934d99888 upstream. On some boards setting power_save to a non 0 value leads to clicking / popping sounds when ever we enter/leave powersaving mode. Ideally we would figure out how to avoid these sounds, but that is not always feasible. This commit adds a blacklist for devices where powersaving is known to cause problems and disables it on these devices. Note I tried to put this blacklist in userspace first: https://github.com/systemd/systemd/pull/8128 But the systemd maintainers rightfully pointed out that it would be impossible to then later remove entries once we actually find a way to make power-saving work on listed boards without issues. Having this list in the kernel will allow removal of the blacklist entry in the same commit which fixes the clicks / plops. The blacklist only applies to the default power_save module-option value, if a user explicitly sets the module-option then the blacklist is not used. [ added an ifdef CONFIG_PM for the build error -- tiwai] BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611 Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/pci/hda/hda_intel.c | 38 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-) --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -179,7 +179,7 @@ static const struct kernel_param_ops par }; #define param_check_xint param_check_int -static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; +static int power_save = -1; module_param(power_save, xint, 0644); MODULE_PARM_DESC(power_save, "Automatic power-saving timeout " "(in second, 0 = disable)."); @@ -2055,6 +2055,24 @@ out_free: return err; } +#ifdef CONFIG_PM +/* On some boards setting power_save to a non 0 value leads to clicking / + * popping sounds when ever we enter/leave powersaving mode. Ideally we would + * figure out how to avoid these sounds, but that is not always feasible. + * So we keep a list of devices where we disable powersaving as its known + * to causes problems on these devices. + */ +static struct snd_pci_quirk power_save_blacklist[] = { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0), + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0), + /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */ + SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0), + {} +}; +#endif /* CONFIG_PM */ + /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = { [AZX_DRIVER_NVIDIA] = 8, @@ -2067,6 +2085,7 @@ static int azx_probe_continue(struct azx struct hdac_bus *bus = azx_bus(chip); struct pci_dev *pci = chip->pci; int dev = chip->dev_index; + int val; int err; hda->probe_continued = 1; @@ -2142,7 +2161,22 @@ static int azx_probe_continue(struct azx chip->running = 1; azx_add_card_list(chip); - snd_hda_set_power_save(&chip->bus, power_save * 1000); + + val = power_save; +#ifdef CONFIG_PM + if (val == -1) { + const struct snd_pci_quirk *q; + + val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; + q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist); + if (q && val) { + dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n", + q->subvendor, q->subdevice); + val = 0; + } + } +#endif /* CONFIG_PM */ + snd_hda_set_power_save(&chip->bus, val * 1000); if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo) pm_runtime_put_noidle(&pci->dev); Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.4/alsa-hda-add-a-power_save-blacklist.patch

7 years, 4 months

1
0
0 0

Patch "x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-xen-zero-msr_ia32_spec_ctrl-before-suspend.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 71c208dd54ab971036d83ff6d9837bae4976e623 Mon Sep 17 00:00:00 2001 From: Juergen Gross <jgross(a)suse.com> Date: Mon, 26 Feb 2018 15:08:18 +0100 Subject: x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend From: Juergen Gross <jgross(a)suse.com> commit 71c208dd54ab971036d83ff6d9837bae4976e623 upstream. Older Xen versions (4.5 and before) might have problems migrating pv guests with MSR_IA32_SPEC_CTRL having a non-zero value. So before suspending zero that MSR and restore it after being resumed. Signed-off-by: Juergen Gross <jgross(a)suse.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Reviewed-by: Jan Beulich <jbeulich(a)suse.com> Cc: stable(a)vger.kernel.org Cc: xen-devel(a)lists.xenproject.org Cc: boris.ostrovsky(a)oracle.com Link: https://lkml.kernel.org/r/20180226140818.4849-1-jgross@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/xen/suspend.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -1,12 +1,15 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/types.h> #include <linux/tick.h> +#include <linux/percpu-defs.h> #include <xen/xen.h> #include <xen/interface/xen.h> #include <xen/grant_table.h> #include <xen/events.h> +#include <asm/cpufeatures.h> +#include <asm/msr-index.h> #include <asm/xen/hypercall.h> #include <asm/xen/page.h> #include <asm/fixmap.h> @@ -15,6 +18,8 @@ #include "mmu.h" #include "pmu.h" +static DEFINE_PER_CPU(u64, spec_ctrl); + void xen_arch_pre_suspend(void) { xen_save_time_memory_area(); @@ -35,6 +40,9 @@ void xen_arch_post_suspend(int cancelled static void xen_vcpu_notify_restore(void *data) { + if (xen_pv_domain() && boot_cpu_has(X86_FEATURE_SPEC_CTRL)) + wrmsrl(MSR_IA32_SPEC_CTRL, this_cpu_read(spec_ctrl)); + /* Boot processor notified via generic timekeeping_resume() */ if (smp_processor_id() == 0) return; @@ -44,7 +52,15 @@ static void xen_vcpu_notify_restore(void static void xen_vcpu_notify_suspend(void *data) { + u64 tmp; + tick_suspend_local(); + + if (xen_pv_domain() && boot_cpu_has(X86_FEATURE_SPEC_CTRL)) { + rdmsrl(MSR_IA32_SPEC_CTRL, tmp); + this_cpu_write(spec_ctrl, tmp); + wrmsrl(MSR_IA32_SPEC_CTRL, 0); + } } void xen_arch_resume(void) Patches currently in stable-queue which might be from jgross(a)suse.com are queue-4.15/x86-xen-zero-msr_ia32_spec_ctrl-before-suspend.patch

7 years, 4 months

1
0
0 0

Patch "x86/platform/intel-mid: Handle Intel Edison reboot correctly" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/platform/intel-mid: Handle Intel Edison reboot correctly to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-platform-intel-mid-handle-intel-edison-reboot-correctly.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 028091f82eefd5e84f81cef81a7673016ecbe78b Mon Sep 17 00:00:00 2001 From: Sebastian Panceac <sebastian(a)resin.io> Date: Wed, 28 Feb 2018 11:40:49 +0200 Subject: x86/platform/intel-mid: Handle Intel Edison reboot correctly From: Sebastian Panceac <sebastian(a)resin.io> commit 028091f82eefd5e84f81cef81a7673016ecbe78b upstream. When the Intel Edison module is powered with 3.3V, the reboot command makes the module stuck. If the module is powered at a greater voltage, like 4.4V (as the Edison Mini Breakout board does), reboot works OK. The official Intel Edison BSP sends the IPCMSG_COLD_RESET message to the SCU by default. The IPCMSG_COLD_BOOT which is used by the upstream kernel is only sent when explicitely selected on the kernel command line. Use IPCMSG_COLD_RESET unconditionally which makes reboot work independent of the power supply voltage. [ tglx: Massaged changelog ] Fixes: bda7b072de99 ("x86/platform/intel-mid: Implement power off sequence") Signed-off-by: Sebastian Panceac <sebastian(a)resin.io> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Acked-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Cc: stable(a)vger.kernel.org Link: https://lkml.kernel.org/r/1519810849-15131-1-git-send-email-sebastian@resin… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/platform/intel-mid/intel-mid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/x86/platform/intel-mid/intel-mid.c +++ b/arch/x86/platform/intel-mid/intel-mid.c @@ -79,7 +79,7 @@ static void intel_mid_power_off(void) static void intel_mid_reboot(void) { - intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0); + intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0); } static unsigned long __init intel_mid_calibrate_tsc(void) Patches currently in stable-queue which might be from sebastian(a)resin.io are queue-4.15/x86-platform-intel-mid-handle-intel-edison-reboot-correctly.patch

7 years, 4 months

1
0
0 0

Patch "x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-cpu_entry_area-sync-cpu_entry_area-to-initial_page_table.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 945fd17ab6bab8a4d05da6c3170519fbcfe62ddb Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx(a)linutronix.de> Date: Wed, 28 Feb 2018 21:14:26 +0100 Subject: x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table From: Thomas Gleixner <tglx(a)linutronix.de> commit 945fd17ab6bab8a4d05da6c3170519fbcfe62ddb upstream. The separation of the cpu_entry_area from the fixmap missed the fact that on 32bit non-PAE kernels the cpu_entry_area mapping might not be covered in initial_page_table by the previous synchronizations. This results in suspend/resume failures because 32bit utilizes initial page table for resume. The absence of the cpu_entry_area mapping results in a triple fault, aka. insta reboot. With PAE enabled this works by chance because the PGD entry which covers the fixmap and other parts incindentally provides the cpu_entry_area mapping as well. Synchronize the initial page table after setting up the cpu entry area. Instead of adding yet another copy of the same code, move it to a function and invoke it from the various places. It needs to be investigated if the existing calls in setup_arch() and setup_per_cpu_areas() can be replaced by the later invocation from setup_cpu_entry_areas(), but that's beyond the scope of this fix. Fixes: 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap") Reported-by: Woody Suwalski <terraluna977(a)gmail.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Tested-by: Woody Suwalski <terraluna977(a)gmail.com> Cc: William Grant <william.grant(a)canonical.com> Cc: stable(a)vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802282137290.1392@nanos.tec.linu… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/include/asm/pgtable_32.h | 1 + arch/x86/include/asm/pgtable_64.h | 1 + arch/x86/kernel/setup.c | 17 +++++------------ arch/x86/kernel/setup_percpu.c | 17 ++++------------- arch/x86/mm/cpu_entry_area.c | 6 ++++++ arch/x86/mm/init_32.c | 15 +++++++++++++++ 6 files changed, 32 insertions(+), 25 deletions(-) --- a/arch/x86/include/asm/pgtable_32.h +++ b/arch/x86/include/asm/pgtable_32.h @@ -32,6 +32,7 @@ extern pmd_t initial_pg_pmd[]; static inline void pgtable_cache_init(void) { } static inline void check_pgt_cache(void) { } void paging_init(void); +void sync_initial_page_table(void); /* * Define this if things work differently on an i386 and an i486: --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -28,6 +28,7 @@ extern pgd_t init_top_pgt[]; #define swapper_pg_dir init_top_pgt extern void paging_init(void); +static inline void sync_initial_page_table(void) { } #define pte_ERROR(e) \ pr_err("%s:%d: bad pte %p(%016lx)\n", \ --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1205,20 +1205,13 @@ void __init setup_arch(char **cmdline_p) kasan_init(); -#ifdef CONFIG_X86_32 - /* sync back kernel address range */ - clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY, - swapper_pg_dir + KERNEL_PGD_BOUNDARY, - KERNEL_PGD_PTRS); - /* - * sync back low identity map too. It is used for example - * in the 32-bit EFI stub. + * Sync back kernel address range. + * + * FIXME: Can the later sync in setup_cpu_entry_areas() replace + * this call? */ - clone_pgd_range(initial_page_table, - swapper_pg_dir + KERNEL_PGD_BOUNDARY, - min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY)); -#endif + sync_initial_page_table(); tboot_probe(); --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -287,24 +287,15 @@ void __init setup_per_cpu_areas(void) /* Setup cpu initialized, callin, callout masks */ setup_cpu_local_masks(); -#ifdef CONFIG_X86_32 /* * Sync back kernel address range again. We already did this in * setup_arch(), but percpu data also needs to be available in * the smpboot asm. We can't reliably pick up percpu mappings * using vmalloc_fault(), because exception dispatch needs * percpu data. + * + * FIXME: Can the later sync in setup_cpu_entry_areas() replace + * this call? */ - clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY, - swapper_pg_dir + KERNEL_PGD_BOUNDARY, - KERNEL_PGD_PTRS); - - /* - * sync back low identity map too. It is used for example - * in the 32-bit EFI stub. - */ - clone_pgd_range(initial_page_table, - swapper_pg_dir + KERNEL_PGD_BOUNDARY, - min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY)); -#endif + sync_initial_page_table(); } --- a/arch/x86/mm/cpu_entry_area.c +++ b/arch/x86/mm/cpu_entry_area.c @@ -163,4 +163,10 @@ void __init setup_cpu_entry_areas(void) for_each_possible_cpu(cpu) setup_cpu_entry_area(cpu); + + /* + * This is the last essential update to swapper_pgdir which needs + * to be synchronized to initial_page_table on 32bit. + */ + sync_initial_page_table(); } --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -453,6 +453,21 @@ static inline void permanent_kmaps_init( } #endif /* CONFIG_HIGHMEM */ +void __init sync_initial_page_table(void) +{ + clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY, + swapper_pg_dir + KERNEL_PGD_BOUNDARY, + KERNEL_PGD_PTRS); + + /* + * sync back low identity map too. It is used for example + * in the 32-bit EFI stub. + */ + clone_pgd_range(initial_page_table, + swapper_pg_dir + KERNEL_PGD_BOUNDARY, + min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY)); +} + void __init native_pagetable_init(void) { unsigned long pfn, va; Patches currently in stable-queue which might be from tglx(a)linutronix.de are queue-4.15/x86-xen-zero-msr_ia32_spec_ctrl-before-suspend.patch queue-4.15/x86-cpu_entry_area-sync-cpu_entry_area-to-initial_page_table.patch queue-4.15/x86-platform-intel-mid-handle-intel-edison-reboot-correctly.patch queue-4.15/timers-forward-timer-base-before-migrating-timers.patch queue-4.15/hrtimer-ensure-posix-compliance-relative-clock_realtime-hrtimers.patch

7 years, 4 months

1
0
0 0

Patch "vfio: disable filesystem-dax page pinning" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled vfio: disable filesystem-dax page pinning to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vfio-disable-filesystem-dax-page-pinning.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 94db151dc89262bfa82922c44e8320cea2334667 Mon Sep 17 00:00:00 2001 From: Dan Williams <dan.j.williams(a)intel.com> Date: Sun, 4 Feb 2018 10:34:02 -0800 Subject: vfio: disable filesystem-dax page pinning From: Dan Williams <dan.j.williams(a)intel.com> commit 94db151dc89262bfa82922c44e8320cea2334667 upstream. Filesystem-DAX is incompatible with 'longterm' page pinning. Without page cache indirection a DAX mapping maps filesystem blocks directly. This means that the filesystem must not modify a file's block map while any page in a mapping is pinned. In order to prevent the situation of userspace holding of filesystem operations indefinitely, disallow 'longterm' Filesystem-DAX mappings. RDMA has the same conflict and the plan there is to add a 'with lease' mechanism to allow the kernel to notify userspace that the mapping is being torn down for block-map maintenance. Perhaps something similar can be put in place for vfio. Note that xfs and ext4 still report: "DAX enabled. Warning: EXPERIMENTAL, use at your own risk" ...at mount time, and resolving the dax-dma-vs-truncate problem is one of the last hurdles to remove that designation. Acked-by: Alex Williamson <alex.williamson(a)redhat.com> Cc: Michal Hocko <mhocko(a)suse.com> Cc: kvm(a)vger.kernel.org Cc: <stable(a)vger.kernel.org> Reported-by: Haozhong Zhang <haozhong.zhang(a)intel.com> Tested-by: Haozhong Zhang <haozhong.zhang(a)intel.com> Fixes: d475c6346a38 ("dax,ext2: replace XIP read and write with DAX I/O") Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/vfio/vfio_iommu_type1.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -338,11 +338,12 @@ static int vaddr_get_pfn(struct mm_struc { struct page *page[1]; struct vm_area_struct *vma; + struct vm_area_struct *vmas[1]; int ret; if (mm == current->mm) { - ret = get_user_pages_fast(vaddr, 1, !!(prot & IOMMU_WRITE), - page); + ret = get_user_pages_longterm(vaddr, 1, !!(prot & IOMMU_WRITE), + page, vmas); } else { unsigned int flags = 0; @@ -351,7 +352,18 @@ static int vaddr_get_pfn(struct mm_struc down_read(&mm->mmap_sem); ret = get_user_pages_remote(NULL, mm, vaddr, 1, flags, page, - NULL, NULL); + vmas, NULL); + /* + * The lifetime of a vaddr_get_pfn() page pin is + * userspace-controlled. In the fs-dax case this could + * lead to indefinite stalls in filesystem operations. + * Disallow attempts to pin fs-dax pages via this + * interface. + */ + if (ret > 0 && vma_is_fsdax(vmas[0])) { + ret = -EOPNOTSUPP; + put_page(page[0]); + } up_read(&mm->mmap_sem); } Patches currently in stable-queue which might be from dan.j.williams(a)intel.com are queue-4.15/dax-fix-vma_is_fsdax-helper.patch queue-4.15/vfio-disable-filesystem-dax-page-pinning.patch

7 years, 4 months

1
0
0 0

Patch "timers: Forward timer base before migrating timers" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled timers: Forward timer base before migrating timers to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: timers-forward-timer-base-before-migrating-timers.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c52232a49e203a65a6e1a670cd5262f59e9364a0 Mon Sep 17 00:00:00 2001 From: Lingutla Chandrasekhar <clingutla(a)codeaurora.org> Date: Thu, 18 Jan 2018 17:20:22 +0530 Subject: timers: Forward timer base before migrating timers From: Lingutla Chandrasekhar <clingutla(a)codeaurora.org> commit c52232a49e203a65a6e1a670cd5262f59e9364a0 upstream. On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a live CPU. This happens from the control thread which initiated the unplug. If the CPU on which the control thread runs came out from a longer idle period then the base clock of that CPU might be stale because the control thread runs prior to any event which forwards the clock. In such a case the timers from the unplugged CPU are queued on the live CPU based on the stale clock which can cause large delays due to increased granularity of the outer timer wheels which are far away from base:;clock. But there is a worse problem than that. The following sequence of events illustrates it: - CPU0 timer1 is queued expires = 59969 and base->clk = 59131. The timer is queued at wheel level 2, with resulting expiry time = 60032 (due to level granularity). - CPU1 enters idle @60007, with next timer expiry @60020. - CPU0 is hotplugged at @60009 - CPU1 exits idle and runs the control thread which migrates the timers from CPU0 timer1 is now queued in level 0 for immediate handling in the next softirq because the requested expiry time 59969 is before CPU1 base->clk 60007 - CPU1 runs code which forwards the base clock which succeeds because the next expiring timer. which was collected at idle entry time is still set to 60020. So it forwards beyond 60007 and therefore misses to expire the migrated timer1. That timer gets expired when the wheel wraps around again, which takes between 63 and 630ms depending on the HZ setting. Address both problems by invoking forward_timer_base() for the control CPUs timer base. All other places, which might run into a similar problem (mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid that. [ tglx: Massaged comment and changelog ] Fixes: a683f390b93f ("timers: Forward the wheel clock whenever possible") Co-developed-by: Neeraj Upadhyay <neeraju(a)codeaurora.org> Signed-off-by: Neeraj Upadhyay <neeraju(a)codeaurora.org> Signed-off-by: Lingutla Chandrasekhar <clingutla(a)codeaurora.org> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Anna-Maria Gleixner <anna-maria(a)linutronix.de> Cc: linux-arm-msm(a)vger.kernel.org Cc: stable(a)vger.kernel.org Link: https://lkml.kernel.org/r/20180118115022.6368-1-clingutla@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/time/timer.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -1886,6 +1886,12 @@ int timers_dead_cpu(unsigned int cpu) raw_spin_lock_irq(&new_base->lock); raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING); + /* + * The current CPUs base clock might be stale. Update it + * before moving the timers over. + */ + forward_timer_base(new_base); + BUG_ON(old_base->running_timer); for (i = 0; i < WHEEL_SIZE; i++) Patches currently in stable-queue which might be from clingutla(a)codeaurora.org are queue-4.15/timers-forward-timer-base-before-migrating-timers.patch

7 years, 4 months

1
0
0 0

Patch "parisc: Use cr16 interval timers unconditionally on qemu" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled parisc: Use cr16 interval timers unconditionally on qemu to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: parisc-use-cr16-interval-timers-unconditionally-on-qemu.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 5ffa8518851f1401817c15d2a7eecc0373c26ff9 Mon Sep 17 00:00:00 2001 From: Helge Deller <deller(a)gmx.de> Date: Fri, 12 Jan 2018 22:44:00 +0100 Subject: parisc: Use cr16 interval timers unconditionally on qemu From: Helge Deller <deller(a)gmx.de> commit 5ffa8518851f1401817c15d2a7eecc0373c26ff9 upstream. When running on qemu we know that the (emulated) cr16 cpu-internal clocks are syncronized. So let's use them unconditionally on qemu. Signed-off-by: Helge Deller <deller(a)gmx.de> Cc: stable(a)vger.kernel.org # 4.14+ Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/parisc/include/asm/processor.h | 2 ++ arch/parisc/kernel/time.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -316,6 +316,8 @@ extern int _parisc_requires_coherency; #define parisc_requires_coherency() (0) #endif +extern int running_on_qemu; + #endif /* __ASSEMBLY__ */ #endif /* __ASM_PARISC_PROCESSOR_H */ --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -248,7 +248,7 @@ static int __init init_cr16_clocksource( * different sockets, so mark them unstable and lower rating on * multi-socket SMP systems. */ - if (num_online_cpus() > 1) { + if (num_online_cpus() > 1 && !running_on_qemu) { int cpu; unsigned long cpu0_loc; cpu0_loc = per_cpu(cpu_data, 0).cpu_loc; Patches currently in stable-queue which might be from deller(a)gmx.de are queue-4.15/parisc-hide-virtual-kernel-memory-layout.patch queue-4.15/parisc-use-cr16-interval-timers-unconditionally-on-qemu.patch queue-4.15/parisc-fix-ordering-of-cache-and-tlb-flushes.patch queue-4.15/parisc-reduce-irq-overhead-when-run-in-qemu.patch

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror