- Linux-stable-mirror - lists.linaro.org

Patch "coresight: Fix disabling of CoreSight TPIU" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled coresight: Fix disabling of CoreSight TPIU to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: coresight-fix-disabling-of-coresight-tpiu.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:57:33 CET 2018 From: Robert Walker <robert.walker(a)arm.com> Date: Mon, 18 Dec 2017 11:05:44 -0700 Subject: coresight: Fix disabling of CoreSight TPIU From: Robert Walker <robert.walker(a)arm.com> [ Upstream commit 11595db8e17faaa05fadc25746c870e31276962f ] The CoreSight TPIU should be disabled when tracing to other sinks to allow them to operate at full bandwidth. This patch fixes tpiu_disable_hw() to correctly disable the TPIU by configuring the TPIU to stop on flush, initiating a manual flush, waiting for the flush to complete and then waits for the TPIU to indicate it has stopped. Signed-off-by: Robert Walker <robert.walker(a)arm.com> Tested-by: Mike Leach <mike.leach(a)linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hwtracing/coresight/coresight-tpiu.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) --- a/drivers/hwtracing/coresight/coresight-tpiu.c +++ b/drivers/hwtracing/coresight/coresight-tpiu.c @@ -45,8 +45,11 @@ #define TPIU_ITATBCTR0 0xef8 /** register definition **/ +/* FFSR - 0x300 */ +#define FFSR_FT_STOPPED BIT(1) /* FFCR - 0x304 */ #define FFCR_FON_MAN BIT(6) +#define FFCR_STOP_FI BIT(12) /** * @base: memory mapped base address for this component. @@ -85,10 +88,14 @@ static void tpiu_disable_hw(struct tpiu_ { CS_UNLOCK(drvdata->base); - /* Clear formatter controle reg. */ - writel_relaxed(0x0, drvdata->base + TPIU_FFCR); + /* Clear formatter and stop on flush */ + writel_relaxed(FFCR_STOP_FI, drvdata->base + TPIU_FFCR); /* Generate manual flush */ - writel_relaxed(FFCR_FON_MAN, drvdata->base + TPIU_FFCR); + writel_relaxed(FFCR_STOP_FI | FFCR_FON_MAN, drvdata->base + TPIU_FFCR); + /* Wait for flush to complete */ + coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN, 0); + /* Wait for formatter to stop */ + coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED, 1); CS_LOCK(drvdata->base); } Patches currently in stable-queue which might be from robert.walker(a)arm.com are queue-4.4/coresight-fix-disabling-of-coresight-tpiu.patch

7 years, 6 months

1
0
0 0

Patch "clk: ns2: Correct SDIO bits" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: ns2: Correct SDIO bits to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-ns2-correct-sdio-bits.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:57:32 CET 2018 From: Bharat Kumar Reddy Gooty <bharat.gooty(a)broadcom.com> Date: Mon, 20 Mar 2017 18:12:14 -0400 Subject: clk: ns2: Correct SDIO bits From: Bharat Kumar Reddy Gooty <bharat.gooty(a)broadcom.com> [ Upstream commit 8973aa4aecac223548366ca81818309a0f0efa6d ] Corrected the bits for power and iso. Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty(a)broadcom.com> Signed-off-by: Jon Mason <jon.mason(a)broadcom.com> Fixes: f7225a83 ("clk: ns2: add clock support for Broadcom Northstar 2 SoC") Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/bcm/clk-ns2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/clk/bcm/clk-ns2.c +++ b/drivers/clk/bcm/clk-ns2.c @@ -103,7 +103,7 @@ CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm static const struct iproc_pll_ctrl genpll_sw = { .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, - .aon = AON_VAL(0x0, 2, 9, 8), + .aon = AON_VAL(0x0, 1, 11, 10), .reset = RESET_VAL(0x4, 2, 1), .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3), .ndiv_int = REG_VAL(0x8, 4, 10), Patches currently in stable-queue which might be from bharat.gooty(a)broadcom.com are queue-4.4/clk-ns2-correct-sdio-bits.patch

7 years, 6 months

1
0
0 0

Patch "clk: si5351: Rename internal plls to avoid name collisions" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: si5351: Rename internal plls to avoid name collisions to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-si5351-rename-internal-plls-to-avoid-name-collisions.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:57:33 CET 2018 From: Sergej Sawazki <sergej(a)taudac.com> Date: Tue, 25 Jul 2017 23:21:02 +0200 Subject: clk: si5351: Rename internal plls to avoid name collisions From: Sergej Sawazki <sergej(a)taudac.com> [ Upstream commit cdba9a4fb0b53703959ac861e415816cb61aded4 ] This drivers probe fails due to a clock name collision if a clock named 'plla' or 'pllb' is already registered when registering this drivers internal plls. Fix it by renaming internal plls to avoid name collisions. Cc: Sebastian Hesselbarth <sebastian.hesselbarth(a)gmail.com> Cc: Rabeeh Khoury <rabeeh(a)solid-run.com> Signed-off-by: Sergej Sawazki <sergej(a)taudac.com> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/clk-si5351.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -72,7 +72,7 @@ static const char * const si5351_input_n "xtal", "clkin" }; static const char * const si5351_pll_names[] = { - "plla", "pllb", "vxco" + "si5351_plla", "si5351_pllb", "si5351_vxco" }; static const char * const si5351_msynth_names[] = { "ms0", "ms1", "ms2", "ms3", "ms4", "ms5", "ms6", "ms7" Patches currently in stable-queue which might be from sergej(a)taudac.com are queue-4.4/clk-si5351-rename-internal-plls-to-avoid-name-collisions.patch

7 years, 6 months

1
0
0 0

Patch "Btrfs: send, fix file hole not being preserved due to inline extent" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Btrfs: send, fix file hole not being preserved due to inline extent to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: btrfs-send-fix-file-hole-not-being-preserved-due-to-inline-extent.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:57:32 CET 2018 From: Filipe Manana <fdmanana(a)suse.com> Date: Tue, 4 Apr 2017 20:31:00 +0100 Subject: Btrfs: send, fix file hole not being preserved due to inline extent From: Filipe Manana <fdmanana(a)suse.com> [ Upstream commit e1cbfd7bf6dabdac561c75d08357571f44040a45 ] Normally we don't have inline extents followed by regular extents, but there's currently at least one harmless case where this happens. For example, when the page size is 4Kb and compression is enabled: $ mkfs.btrfs -f /dev/sdb $ mount -o compress /dev/sdb /mnt $ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "fsync" /mnt/foobar $ xfs_io -c "pwrite -S 0xbb 8K 4K" -c "fsync" /mnt/foobar In this case we get a compressed inline extent, representing 4Kb of data, followed by a hole extent and then a regular data extent. The inline extent was not expanded/converted to a regular extent exactly because it represents 4Kb of data. This does not cause any apparent problem (such as the issue solved by commit e1699d2d7bf6 ("btrfs: add missing memset while reading compressed inline extents")) except trigger an unexpected case in the incremental send code path that makes us issue an operation to write a hole when it's not needed, resulting in more writes at the receiver and wasting space at the receiver. So teach the incremental send code to deal with this particular case. The issue can be currently triggered by running fstests btrfs/137 with compression enabled (MOUNT_OPTIONS="-o compress" ./check btrfs/137). Signed-off-by: Filipe Manana <fdmanana(a)suse.com> Reviewed-by: Liu Bo <bo.li.liu(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/btrfs/send.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -5008,13 +5008,19 @@ static int is_extent_unchanged(struct se while (key.offset < ekey->offset + left_len) { ei = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item); right_type = btrfs_file_extent_type(eb, ei); - if (right_type != BTRFS_FILE_EXTENT_REG) { + if (right_type != BTRFS_FILE_EXTENT_REG && + right_type != BTRFS_FILE_EXTENT_INLINE) { ret = 0; goto out; } right_disknr = btrfs_file_extent_disk_bytenr(eb, ei); - right_len = btrfs_file_extent_num_bytes(eb, ei); + if (right_type == BTRFS_FILE_EXTENT_INLINE) { + right_len = btrfs_file_extent_inline_len(eb, slot, ei); + right_len = PAGE_ALIGN(right_len); + } else { + right_len = btrfs_file_extent_num_bytes(eb, ei); + } right_offset = btrfs_file_extent_offset(eb, ei); right_gen = btrfs_file_extent_generation(eb, ei); @@ -5028,6 +5034,19 @@ static int is_extent_unchanged(struct se goto out; } + /* + * We just wanted to see if when we have an inline extent, what + * follows it is a regular extent (wanted to check the above + * condition for inline extents too). This should normally not + * happen but it's possible for example when we have an inline + * compressed extent representing data with a size matching + * the page size (currently the same as sector size). + */ + if (right_type == BTRFS_FILE_EXTENT_INLINE) { + ret = 0; + goto out; + } + left_offset_fixed = left_offset; if (key.offset < ekey->offset) { /* Fix the right offset for 2a and 7. */ Patches currently in stable-queue which might be from fdmanana(a)suse.com are queue-4.4/btrfs-send-fix-file-hole-not-being-preserved-due-to-inline-extent.patch

7 years, 6 months

1
0
0 0

Patch "cifs: small underflow in cnvrtDosUnixTm()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cifs: small underflow in cnvrtDosUnixTm() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cifs-small-underflow-in-cnvrtdosunixtm.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:57:32 CET 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Mon, 1 May 2017 21:43:43 +0300 Subject: cifs: small underflow in cnvrtDosUnixTm() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 564277eceeca01e02b1ef3e141cfb939184601b4 ] January is month 1. There is no zero-th month. If someone passes a zero month then it means we read from one space before the start of the total_days_of_prev_months[] array. We may as well also be strict about days as well. Fixes: 1bd5bbcb6531 ("[CIFS] Legacy time handling for Win9x and OS/2 part 1") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Steve French <smfrench(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/cifs/netmisc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/fs/cifs/netmisc.c +++ b/fs/cifs/netmisc.c @@ -980,10 +980,10 @@ struct timespec cnvrtDosUnixTm(__le16 le cifs_dbg(VFS, "illegal hours %d\n", st->Hours); days = sd->Day; month = sd->Month; - if ((days > 31) || (month > 12)) { + if (days < 1 || days > 31 || month < 1 || month > 12) { cifs_dbg(VFS, "illegal date, month %d day: %d\n", month, days); - if (month > 12) - month = 12; + days = clamp(days, 1, 31); + month = clamp(month, 1, 12); } month -= 1; days += total_days_of_prev_months[month]; Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.4/asoc-intel-skylake-uninitialized-variable-in-probe_codec.patch queue-4.4/mmc-host-omap_hsmmc-checking-for-null-instead-of-is_err.patch queue-4.4/hsi-ssi_protocol-double-free-in-ssip_pn_xmit.patch queue-4.4/cifs-small-underflow-in-cnvrtdosunixtm.patch

7 years, 6 months

1
0
0 0

Patch "bnx2x: Align RX buffers" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnx2x: Align RX buffers to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnx2x-align-rx-buffers.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:57:32 CET 2018 From: Scott Wood <swood(a)redhat.com> Date: Fri, 28 Apr 2017 19:17:41 -0500 Subject: bnx2x: Align RX buffers From: Scott Wood <swood(a)redhat.com> [ Upstream commit 9b70de6d0266888b3743f03802502e43131043c8 ] The bnx2x driver is not providing proper alignment on the receive buffers it passes to build_skb(), causing skb_shared_info to be misaligned. skb_shared_info contains an atomic, and while PPC normally supports unaligned accesses, it does not support unaligned atomics. Aligning the size of rx buffers will ensure that page_frag_alloc() returns aligned addresses. This can be reproduced on PPC by setting the network MTU to 1450 (or other non-multiple-of-4) and then generating sufficient inbound network traffic (one or two large "wget"s usually does it), producing the following oops: Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656 Faulting instruction address: 0xc00000000080ef8c Oops: Kernel access of bad area, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761da #2 task: c00000ffd4892400 task.stack: c00000ffd4920000 NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320 REGS: c00000ffffc33710 TRAP: 0600 Not tainted (4.11.0-rc8-00088-g4c761da) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24082042 XER: 00000000 CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1 GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100 GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000 GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001 GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000 GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100 NIP [c00000000080ef8c] __skb_clone+0xdc/0x140 LR [c00000000080eee8] __skb_clone+0x38/0x140 Call Trace: [c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable) [c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510 [c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80 [c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0 [c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260 [c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x] [c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480 [c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0 [c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120 [c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200 [c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24 [c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110 [c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160 Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2044,6 +2044,7 @@ static void bnx2x_set_rx_buf_size(struct ETH_OVREHEAD + mtu + BNX2X_FW_RX_ALIGN_END; + fp->rx_buf_size = SKB_DATA_ALIGN(fp->rx_buf_size); /* Note : rx_buf_size doesn't take into account NET_SKB_PAD */ if (fp->rx_buf_size + NET_SKB_PAD <= PAGE_SIZE) fp->rx_frag_size = fp->rx_buf_size + NET_SKB_PAD; Patches currently in stable-queue which might be from swood(a)redhat.com are queue-4.4/bnx2x-align-rx-buffers.patch

7 years, 6 months

1
0
0 0

Patch "Bluetooth: hci_qca: Avoid setup failure on missing rampatch" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: hci_qca: Avoid setup failure on missing rampatch to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-hci_qca-avoid-setup-failure-on-missing-rampatch.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:57:32 CET 2018 From: Loic Poulain <loic.poulain(a)linaro.org> Date: Mon, 6 Nov 2017 12:16:56 +0100 Subject: Bluetooth: hci_qca: Avoid setup failure on missing rampatch From: Loic Poulain <loic.poulain(a)linaro.org> [ Upstream commit ba8f3597900291a93604643017fff66a14546015 ] Assuming that the original code idea was to enable in-band sleeping only if the setup_rome method returns succes and run in 'standard' mode otherwise, we should not return setup_rome return value which makes qca_setup fail if no rampatch/nvm file found. This fixes BT issue on the dragonboard-820C p4 which includes the following QCA controller: hci0: Product:0x00000008 hci0: Patch :0x00000111 hci0: ROM :0x00000302 hci0: SOC :0x00000044 Since there is no rampatch for this controller revision, just make it work as is. Signed-off-by: Loic Poulain <loic.poulain(a)linaro.org> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bluetooth/hci_qca.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -936,6 +936,9 @@ static int qca_setup(struct hci_uart *hu if (!ret) { set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags); qca_debugfs_init(hdev); + } else if (ret == -ENOENT) { + /* No patch/nvm-config found, run with original fw/config */ + ret = 0; } /* Setup bdaddr */ Patches currently in stable-queue which might be from loic.poulain(a)linaro.org are queue-4.4/bluetooth-hci_qca-avoid-setup-failure-on-missing-rampatch.patch

7 years, 6 months

1
0
0 0

Patch "ASoC: Intel: Skylake: Uninitialized variable in probe_codec()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: Intel: Skylake: Uninitialized variable in probe_codec() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-intel-skylake-uninitialized-variable-in-probe_codec.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:57:32 CET 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Thu, 20 Apr 2017 13:17:02 +0300 Subject: ASoC: Intel: Skylake: Uninitialized variable in probe_codec() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit e6a33532affd14c12688c0e9b2e773e8b2550f3b ] My static checker complains that if snd_hdac_bus_get_response() returns -EIO then "res" is uninitialized. Fix this by initializing it to -1 so that the error is handled correctly. Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/intel/skylake/skl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -280,7 +280,7 @@ static int probe_codec(struct hdac_ext_b struct hdac_bus *bus = ebus_to_hbus(ebus); unsigned int cmd = (addr << 28) | (AC_NODE_ROOT << 20) | (AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID; - unsigned int res; + unsigned int res = -1; mutex_lock(&bus->cmd_mutex); snd_hdac_bus_send_cmd(bus, cmd); Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.4/asoc-intel-skylake-uninitialized-variable-in-probe_codec.patch queue-4.4/mmc-host-omap_hsmmc-checking-for-null-instead-of-is_err.patch queue-4.4/hsi-ssi_protocol-double-free-in-ssip_pn_xmit.patch queue-4.4/cifs-small-underflow-in-cnvrtdosunixtm.patch

7 years, 6 months

1
0
0 0

Patch "ath: Fix updating radar flags for coutry code India" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath: Fix updating radar flags for coutry code India to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath-fix-updating-radar-flags-for-coutry-code-india.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:57:32 CET 2018 From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Date: Wed, 12 Apr 2017 23:19:37 +0530 Subject: ath: Fix updating radar flags for coutry code India From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> [ Upstream commit c0c345d4cacc6a1f39d4856f37dcf6e34f51a5e4 ] As per latest regulatory update for India, channel 52, 56, 60, 64 is no longer restricted to DFS. Enabling DFS/no infra flags in driver results in applying all DFS related restrictions (like doing CAC etc before this channel moves to 'available state') for these channels even though the country code is programmed as 'India' in he hardware, fix this by relaxing the frequency range while applying RADAR flags only if the country code is programmed to India. If the frequency range needs to modified based on different country code, ath_is_radar_freq can be extended/modified dynamically. Signed-off-by: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/regd.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -254,8 +254,12 @@ bool ath_is_49ghz_allowed(u16 regdomain) EXPORT_SYMBOL(ath_is_49ghz_allowed); /* Frequency is one where radar detection is required */ -static bool ath_is_radar_freq(u16 center_freq) +static bool ath_is_radar_freq(u16 center_freq, + struct ath_regulatory *reg) + { + if (reg->country_code == CTRY_INDIA) + return (center_freq >= 5500 && center_freq <= 5700); return (center_freq >= 5260 && center_freq <= 5700); } @@ -306,7 +310,7 @@ __ath_reg_apply_beaconing_flags(struct w enum nl80211_reg_initiator initiator, struct ieee80211_channel *ch) { - if (ath_is_radar_freq(ch->center_freq) || + if (ath_is_radar_freq(ch->center_freq, reg) || (ch->flags & IEEE80211_CHAN_RADAR)) return; @@ -395,8 +399,9 @@ ath_reg_apply_ir_flags(struct wiphy *wip } } -/* Always apply Radar/DFS rules on freq range 5260 MHz - 5700 MHz */ -static void ath_reg_apply_radar_flags(struct wiphy *wiphy) +/* Always apply Radar/DFS rules on freq range 5500 MHz - 5700 MHz */ +static void ath_reg_apply_radar_flags(struct wiphy *wiphy, + struct ath_regulatory *reg) { struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; @@ -409,7 +414,7 @@ static void ath_reg_apply_radar_flags(st for (i = 0; i < sband->n_channels; i++) { ch = &sband->channels[i]; - if (!ath_is_radar_freq(ch->center_freq)) + if (!ath_is_radar_freq(ch->center_freq, reg)) continue; /* We always enable radar detection/DFS on this * frequency range. Additionally we also apply on @@ -505,7 +510,7 @@ void ath_reg_notifier_apply(struct wiphy struct ath_common *common = container_of(reg, struct ath_common, regulatory); /* We always apply this */ - ath_reg_apply_radar_flags(wiphy); + ath_reg_apply_radar_flags(wiphy, reg); /* * This would happen when we have sent a custom regulatory request @@ -653,7 +658,7 @@ ath_regd_init_wiphy(struct ath_regulator } wiphy_apply_custom_regulatory(wiphy, regd); - ath_reg_apply_radar_flags(wiphy); + ath_reg_apply_radar_flags(wiphy, reg); ath_reg_apply_world_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER, reg); return 0; } Patches currently in stable-queue which might be from mohammed(a)qti.qualcomm.com are queue-4.4/ath-fix-updating-radar-flags-for-coutry-code-india.patch

7 years, 6 months

1
0
0 0

Patch "ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dra7-clockdomain-change-the-clktrctrl-of-cm_pcie_clkstctrl-to-sw_wkup.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:57:32 CET 2018 From: Kishon Vijay Abraham I <kishon(a)ti.com> Date: Mon, 27 Mar 2017 15:15:20 +0530 Subject: ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP From: Kishon Vijay Abraham I <kishon(a)ti.com> [ Upstream commit 2c949ce38f4e81d7487f165fa3b8f77d74a2a6c4 ] The PCIe programming sequence in TRM suggests CLKSTCTRL of PCIe should be set to SW_WKUP. There are no issues when CLKSTCTRL is set to HW_AUTO in RC mode. However in EP mode, the host system is not able to access the MEMSPACE and setting the CLKSTCTRL to SW_WKUP fixes it. Acked-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon(a)ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/mach-omap2/clockdomains7xx_data.c +++ b/arch/arm/mach-omap2/clockdomains7xx_data.c @@ -524,7 +524,7 @@ static struct clockdomain pcie_7xx_clkdm .dep_bit = DRA7XX_PCIE_STATDEP_SHIFT, .wkdep_srcs = pcie_wkup_sleep_deps, .sleepdep_srcs = pcie_wkup_sleep_deps, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain atl_7xx_clkdm = { Patches currently in stable-queue which might be from kishon(a)ti.com are queue-4.4/arm-dra7-clockdomain-change-the-clktrctrl-of-cm_pcie_clkstctrl-to-sw_wkup.patch queue-4.4/mmc-host-omap_hsmmc-checking-for-null-instead-of-is_err.patch

7 years, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror