- Linux-stable-mirror - lists.linaro.org

Patch "cpufreq: Fix governor module removal race" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cpufreq: Fix governor module removal race to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cpufreq-fix-governor-module-removal-race.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: "Rafael J. Wysocki" <rafael.j.wysocki(a)intel.com> Date: Thu, 23 Nov 2017 14:27:07 +0100 Subject: cpufreq: Fix governor module removal race From: "Rafael J. Wysocki" <rafael.j.wysocki(a)intel.com> [ Upstream commit a8b149d32b663c1a4105273295184b78f53d33cf ] It is possible to remove a cpufreq governor module after cpufreq_parse_governor() has returned success in store_scaling_governor() and before cpufreq_set_policy() acquires a reference to it, because the governor list is not protected during that period and nothing prevents the governor from being unregistered then. Prevent that from happening by acquiring an extra reference to the governor module temporarily in cpufreq_parse_governor(), under cpufreq_governor_mutex, and dropping it in store_scaling_governor(), when cpufreq_set_policy() returns. Note that the second cpufreq_parse_governor() call site is fine, because it only cares about the policy member of new_policy. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Acked-by: Viresh Kumar <viresh.kumar(a)linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/cpufreq/cpufreq.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -551,6 +551,8 @@ static int cpufreq_parse_governor(char * *governor = t; err = 0; } + if (t && !try_module_get(t->owner)) + t = NULL; mutex_unlock(&cpufreq_governor_mutex); } @@ -669,6 +671,10 @@ static ssize_t store_scaling_governor(st return -EINVAL; ret = cpufreq_set_policy(policy, &new_policy); + + if (new_policy.governor) + module_put(new_policy.governor->owner); + return ret ? ret : count; } Patches currently in stable-queue which might be from rafael.j.wysocki(a)intel.com are queue-4.4/cpufreq-fix-governor-module-removal-race.patch

7 years, 5 months

1
0
0 0

Patch "coresight: Fixes coresight DT parse to get correct output port ID." has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled coresight: Fixes coresight DT parse to get correct output port ID. to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: coresight-fixes-coresight-dt-parse-to-get-correct-output-port-id.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Mike Leach <mike.leach(a)linaro.org> Date: Mon, 27 Mar 2017 11:09:33 -0600 Subject: coresight: Fixes coresight DT parse to get correct output port ID. From: Mike Leach <mike.leach(a)linaro.org> [ Upstream commit eeedc5421dd3b51de73e6106405c5c77f920f281 ] Corrected to get the port numbering to allow programmable replicator driver to operate correctly. By convention, CoreSight devices number ports, not endpoints in the .dts files:- port { reg<N> endpoint { } } Existing code read endpoint number - always 0x0, rather than the correct port number. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hwtracing/coresight/of_coresight.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/hwtracing/coresight/of_coresight.c +++ b/drivers/hwtracing/coresight/of_coresight.c @@ -150,7 +150,7 @@ struct coresight_platform_data *of_get_c continue; /* The local out port number */ - pdata->outports[i] = endpoint.id; + pdata->outports[i] = endpoint.port; /* * Get a handle on the remote port and parent Patches currently in stable-queue which might be from mike.leach(a)linaro.org are queue-4.4/coresight-fixes-coresight-dt-parse-to-get-correct-output-port-id.patch

7 years, 5 months

1
0
0 0

Patch "braille-console: Fix value returned by _braille_console_setup" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled braille-console: Fix value returned by _braille_console_setup to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: braille-console-fix-value-returned-by-_braille_console_setup.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Samuel Thibault <samuel.thibault(a)ens-lyon.org> Date: Sun, 26 Mar 2017 22:47:36 +0200 Subject: braille-console: Fix value returned by _braille_console_setup From: Samuel Thibault <samuel.thibault(a)ens-lyon.org> [ Upstream commit 2ed2b8621be2708c0f6d61fe9841e9ad8b9753f0 ] commit bbeddf52adc1 ("printk: move braille console support into separate braille.[ch] files") introduced _braille_console_setup() to outline the braille initialization code. There was however some confusion over the value it was supposed to return. commit 2cfe6c4ac7ee ("printk: Fix return of braille_register_console()") tried to fix it but failed to. This fixes and documents the returned value according to the use in printk.c: non-zero return means a parsing error, and thus this console configuration should be ignored. Signed-off-by: Samuel Thibault <samuel.thibault(a)ens-lyon.org> Cc: Aleksey Makarov <aleksey.makarov(a)linaro.org> Cc: Joe Perches <joe(a)perches.com> Cc: Ming Lei <ming.lei(a)canonical.com> Cc: Steven Rostedt <rostedt(a)goodmis.org> Acked-by: Petr Mladek <pmladek(a)suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/printk/braille.c | 15 ++++++++------- kernel/printk/braille.h | 13 ++++++++++--- 2 files changed, 18 insertions(+), 10 deletions(-) --- a/kernel/printk/braille.c +++ b/kernel/printk/braille.c @@ -2,12 +2,13 @@ #include <linux/kernel.h> #include <linux/console.h> +#include <linux/errno.h> #include <linux/string.h> #include "console_cmdline.h" #include "braille.h" -char *_braille_console_setup(char **str, char **brl_options) +int _braille_console_setup(char **str, char **brl_options) { if (!strncmp(*str, "brl,", 4)) { *brl_options = ""; @@ -15,14 +16,14 @@ char *_braille_console_setup(char **str, } else if (!strncmp(*str, "brl=", 4)) { *brl_options = *str + 4; *str = strchr(*brl_options, ','); - if (!*str) + if (!*str) { pr_err("need port name after brl=\n"); - else - *((*str)++) = 0; - } else - return NULL; + return -EINVAL; + } + *((*str)++) = 0; + } - return *str; + return 0; } int --- a/kernel/printk/braille.h +++ b/kernel/printk/braille.h @@ -9,7 +9,14 @@ braille_set_options(struct console_cmdli c->brl_options = brl_options; } -char * +/* + * Setup console according to braille options. + * Return -EINVAL on syntax error, 0 on success (or no braille option was + * actually given). + * Modifies str to point to the serial options + * Sets brl_options to the parsed braille options. + */ +int _braille_console_setup(char **str, char **brl_options); int @@ -25,10 +32,10 @@ braille_set_options(struct console_cmdli { } -static inline char * +static inline int _braille_console_setup(char **str, char **brl_options) { - return NULL; + return 0; } static inline int Patches currently in stable-queue which might be from samuel.thibault(a)ens-lyon.org are queue-4.4/braille-console-fix-value-returned-by-_braille_console_setup.patch queue-4.4/staging-speakup-replace-bug_on-with-warn_on.patch

7 years, 5 months

1
0
0 0

Patch "clk: qcom: msm8916: fix mnd_width for codec_digcodec" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: qcom: msm8916: fix mnd_width for codec_digcodec to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-qcom-msm8916-fix-mnd_width-for-codec_digcodec.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Date: Wed, 6 Dec 2017 12:11:38 +0000 Subject: clk: qcom: msm8916: fix mnd_width for codec_digcodec From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> [ Upstream commit d8e488e8242ecf129eebc440c92d800a99ca109d ] This patch fixes missing mnd_width for codec_digital clk, this is now set to 8 inline with datasheet. Fixes: 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/qcom/gcc-msm8916.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/clk/qcom/gcc-msm8916.c +++ b/drivers/clk/qcom/gcc-msm8916.c @@ -1437,6 +1437,7 @@ static const struct freq_tbl ftbl_codec_ static struct clk_rcg2 codec_digcodec_clk_src = { .cmd_rcgr = 0x1c09c, + .mnd_width = 8, .hid_width = 5, .parent_map = gcc_xo_gpll1_emclk_sleep_map, .freq_tbl = ftbl_codec_clk, Patches currently in stable-queue which might be from srinivas.kandagatla(a)linaro.org are queue-4.4/clk-qcom-msm8916-fix-mnd_width-for-codec_digcodec.patch

7 years, 5 months

1
0
0 0

Patch "bonding: refine bond_fold_stats() wrap detection" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bonding: refine bond_fold_stats() wrap detection to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bonding-refine-bond_fold_stats-wrap-detection.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Eric Dumazet <edumazet(a)google.com> Date: Wed, 29 Mar 2017 10:45:44 -0700 Subject: bonding: refine bond_fold_stats() wrap detection From: Eric Dumazet <edumazet(a)google.com> [ Upstream commit 142c6594acbcc32391af9c15f8cd65c6c177698f ] Some device drivers reset their stats at down/up events, possibly fooling bonding stats, since they operate with relative deltas. It is nearly not possible to fix drivers, since some of them compute the tx/rx counters based on per rx/tx queue stats, and the queues can be reconfigured (ethtool -L) between the down/up sequence. Lets avoid accumulating 'negative' values that render bonding stats useless. It is better to lose small deltas, assuming the bonding stats are fetched at a reasonable frequency. Fixes: 5f0c5f73e5ef ("bonding: make global bonding stats more reliable") Signed-off-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/bonding/bond_main.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3276,12 +3276,17 @@ static void bond_fold_stats(struct rtnl_ for (i = 0; i < sizeof(*_res) / sizeof(u64); i++) { u64 nv = new[i]; u64 ov = old[i]; + s64 delta = nv - ov; /* detects if this particular field is 32bit only */ if (((nv | ov) >> 32) == 0) - res[i] += (u32)nv - (u32)ov; - else - res[i] += nv - ov; + delta = (s64)(s32)((u32)nv - (u32)ov); + + /* filter anomalies, some drivers reset their stats + * at down/up events. + */ + if (delta > 0) + res[i] += delta; } } Patches currently in stable-queue which might be from edumazet(a)google.com are queue-4.4/selinux-check-for-address-length-in-selinux_socket_bind.patch queue-4.4/bonding-refine-bond_fold_stats-wrap-detection.patch

7 years, 5 months

1
0
0 0

Patch "blk-throttle: make sure expire time isn't too big" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled blk-throttle: make sure expire time isn't too big to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: blk-throttle-make-sure-expire-time-isn-t-too-big.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Shaohua Li <shli(a)fb.com> Date: Mon, 27 Mar 2017 10:51:36 -0700 Subject: blk-throttle: make sure expire time isn't too big From: Shaohua Li <shli(a)fb.com> [ Upstream commit 06cceedcca67a93ac7f7aa93bbd9980c7496d14e ] cgroup could be throttled to a limit but when all cgroups cross high limit, queue enters a higher state and so the group should be throttled to a higher limit. It's possible the cgroup is sleeping because of throttle and other cgroups don't dispatch IO any more. In this case, nobody can trigger current downgrade/upgrade logic. To fix this issue, we could either set up a timer to wakeup the cgroup if other cgroups are idle or make sure this cgroup doesn't sleep too long. Setting up a timer means we must change the timer very frequently. This patch chooses the latter. Making cgroup sleep time not too big wouldn't change cgroup bps/iops, but could make it wakeup more frequently, which isn't a big issue because throtl_slice * 8 is already quite big. Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/blk-throttle.c | 11 +++++++++++ 1 file changed, 11 insertions(+) --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -505,6 +505,17 @@ static void throtl_dequeue_tg(struct thr static void throtl_schedule_pending_timer(struct throtl_service_queue *sq, unsigned long expires) { + unsigned long max_expire = jiffies + 8 * throtl_slice; + + /* + * Since we are adjusting the throttle limit dynamically, the sleep + * time calculated according to previous limit might be invalid. It's + * possible the cgroup sleep time is very long and no other cgroups + * have IO running so notify the limit changes. Make sure the cgroup + * doesn't sleep too long to avoid the missed notification. + */ + if (time_after(expires, max_expire)) + expires = max_expire; mod_timer(&sq->pending_timer, expires); throtl_log(sq, "schedule timer. delay=%lu jiffies=%lu", expires - jiffies, jiffies); Patches currently in stable-queue which might be from shli(a)fb.com are queue-4.4/md-raid6-fix-anomily-when-recovering-a-single-device-in-raid6.patch queue-4.4/blk-throttle-make-sure-expire-time-isn-t-too-big.patch

7 years, 5 months

1
0
0 0

Patch "batman-adv: handle race condition for claims between gateways" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled batman-adv: handle race condition for claims between gateways to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: batman-adv-handle-race-condition-for-claims-between-gateways.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Andreas Pape <APape(a)phoenixcontact.com> Date: Mon, 5 Sep 2016 13:20:29 +0200 Subject: batman-adv: handle race condition for claims between gateways From: Andreas Pape <APape(a)phoenixcontact.com> [ Upstream commit a3a5129e122709306cfa6409781716c2933df99b ] Consider the following situation which has been found in a test setup: Gateway B has claimed client C and gateway A has the same backbone network as B. C sends a broad- or multicast to B and directly after this packet decides to send another packet to A due to a better TQ value. B will forward the broad-/multicast into the backbone as it is the responsible gw and after that A will claim C as it has been chosen by C as the best gateway. If it now happens that A claims C before it has received the broad-/multicast forwarded by B (due to backbone topology or due to some delay in B when forwarding the packet) we get a critical situation: in the current code A will immediately unclaim C when receiving the multicast due to the roaming client scenario although the position of C has not changed in the mesh. If this happens the multi-/broadcast forwarded by B will be sent back into the mesh by A and we have looping packets until one of the gateways claims C again. In order to prevent this, unclaiming of a client due to the roaming client scenario is only done after a certain time is expired after the last claim of the client. 100 ms are used here, which should be slow enough for big backbones and slow gateways but fast enough not to break the roaming client use case. Acked-by: Simon Wunderlich <sw(a)simonwunderlich.de> Signed-off-by: Andreas Pape <apape(a)phoenixcontact.com> [sven(a)narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven(a)narfation.org> Signed-off-by: Simon Wunderlich <sw(a)simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/batman-adv/bridge_loop_avoidance.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1603,10 +1603,22 @@ int batadv_bla_tx(struct batadv_priv *ba /* if yes, the client has roamed and we have * to unclaim it. */ - batadv_handle_unclaim(bat_priv, primary_if, - primary_if->net_dev->dev_addr, - ethhdr->h_source, vid); - goto allow; + if (batadv_has_timed_out(claim->lasttime, 100)) { + /* only unclaim if the last claim entry is + * older than 100 ms to make sure we really + * have a roaming client here. + */ + batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla_tx(): Roaming client %pM detected. Unclaim it.\n", + ethhdr->h_source); + batadv_handle_unclaim(bat_priv, primary_if, + primary_if->net_dev->dev_addr, + ethhdr->h_source, vid); + goto allow; + } else { + batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla_tx(): Race for claim %pM detected. Drop packet.\n", + ethhdr->h_source); + goto handled; + } } /* check if it is a multicast/broadcast frame */ Patches currently in stable-queue which might be from APape(a)phoenixcontact.com are queue-4.4/batman-adv-handle-race-condition-for-claims-between-gateways.patch

7 years, 5 months

1
0
0 0

Patch "ath10k: update tdls teardown state to target" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: update tdls teardown state to target to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-update-tdls-teardown-state-to-target.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Manikanta Pubbisetty <mpubbise(a)qti.qualcomm.com> Date: Mon, 6 Nov 2017 13:39:31 +0530 Subject: ath10k: update tdls teardown state to target From: Manikanta Pubbisetty <mpubbise(a)qti.qualcomm.com> [ Upstream commit 424ea0d174e82365f85c6770225dba098b8f1d5f ] It is required to update the teardown state of the peer when a tdls link with that peer is terminated. This information is useful for the target to perform some cleanups wrt the tdls peer. Without proper cleanup, target assumes that the peer is connected and blocks future connection requests, updating the teardown state of the peer addresses the problem. Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version. Signed-off-by: Manikanta Pubbisetty <mpubbise(a)qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/mac.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -5497,6 +5497,16 @@ static int ath10k_sta_state(struct ieee8 "mac vdev %d peer delete %pM (sta gone)\n", arvif->vdev_id, sta->addr); + if (sta->tdls) { + ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, + sta, + WMI_TDLS_PEER_STATE_TEARDOWN); + if (ret) + ath10k_warn(ar, "failed to update tdls peer state for %pM state %d: %i\n", + sta->addr, + WMI_TDLS_PEER_STATE_TEARDOWN, ret); + } + ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); if (ret) ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n", Patches currently in stable-queue which might be from mpubbise(a)qti.qualcomm.com are queue-4.4/ath10k-update-tdls-teardown-state-to-target.patch

7 years, 5 months

1
0
0 0

Patch "ath10k: fix invalid STS_CAP_OFFSET_MASK" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: fix invalid STS_CAP_OFFSET_MASK to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-fix-invalid-sts_cap_offset_mask.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Ben Greear <greearb(a)candelatech.com> Date: Sat, 2 Dec 2017 16:50:49 +0200 Subject: ath10k: fix invalid STS_CAP_OFFSET_MASK From: Ben Greear <greearb(a)candelatech.com> [ Upstream commit 8cec57f5277ef0e354e37a0bf909dc71bc1f865b ] The 10.4 firmware defines this as a 3-bit field, as does the mac80211 stack. The 4th bit is defined as CONF_IMPLICIT_BF at least in the firmware header I have seen. This patch fixes the ath10k wmi header to match the firmware. Signed-off-by: Ben Greear <greearb(a)candelatech.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/wmi.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -4826,7 +4826,8 @@ enum wmi_10_4_vdev_param { #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 -#define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0 +#define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 +#define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 Patches currently in stable-queue which might be from greearb(a)candelatech.com are queue-4.4/ath10k-fix-invalid-sts_cap_offset_mask.patch

7 years, 5 months

1
0
0 0

Patch "ath10k: fix a warning during channel switch with multiple vaps" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: fix a warning during channel switch with multiple vaps to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-fix-a-warning-during-channel-switch-with-multiple-vaps.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Mar 19 09:58:12 CET 2018 From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Date: Wed, 8 Mar 2017 13:52:06 +0200 Subject: ath10k: fix a warning during channel switch with multiple vaps From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> [ Upstream commit c73f8c00330f59ce9b1ace9ff698aca83390d358 ] Doing a channel switch via hostapd_cli seems to update the new channel context for each VAP's appropriately as below in 'ath10k_mac_update_vif_chan', hence we can safely suppress the warning that shows up during this operation and dump the warning only if no vaps are available for channel switch hostapd_cli -i wlan0 chan_switch 5 5200 OK ath10k_pci : mac chanctx switch n_vifs 3 mode 1 ath10k_pci : mac chanctx switch vdev_id 2 freq 5180->5200 width 0->0 ath10k_pci : mac chanctx switch vdev_id 1 freq 5180->5200 width 0->0 ath10k_pci : mac chanctx switch vdev_id 0 freq 5180->5200 width 0->0 Call Trace: WARNING: backports-20161201-3.14.77-9ab3068/drivers/net/wireless/ath/ath10k/mac.c:7126 [<c022f2d4>] (warn_slowpath_null) from [<bf7f150c>] (ath10k_reconfig_complete+0xe4/0x25c [ath10k_core]) [<bf7f150c>] (ath10k_reconfig_complete [ath10k_core]) [<bf7f35f0>] (ath10k_mac_vif_ap_csa_work+0x214/0x370 [ath10k_core]) [<bf7f38b8>] (ath10k_mac_op_change_chanctx+0x108/0x128 [ath10k_core]) [<bf782ac0>] (ieee80211_recalc_chanctx_min_def+0x30c/0x430 [mac80211]) [<bf7830a4>] (ieee80211_recalc_smps_chanctx+0x2ec/0x840 [mac80211]) [<bf7843e8>] (ieee80211_vif_use_reserved_context+0x7c/0xf8 [mac80211]) [<bf7843e8>] (ieee80211_vif_use_reserved_context [mac80211]) [<bf76e5d4>] (ieee80211_csa_finalize_work+0x5c/0x88 [mac80211]) Fixes: d7bf4b4aba05 ("ath10k: fix ar->rx_channel updating logic") Signed-off-by: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -6427,7 +6427,7 @@ ath10k_mac_update_rx_channel(struct ath1 lockdep_assert_held(&ar->data_lock); WARN_ON(ctx && vifs); - WARN_ON(vifs && n_vifs != 1); + WARN_ON(vifs && !n_vifs); /* FIXME: Sort of an optimization and a workaround. Peers and vifs are * on a linked list now. Doing a lookup peer -> vif -> chanctx for each Patches currently in stable-queue which might be from mohammed(a)qti.qualcomm.com are queue-4.4/ath10k-fix-a-warning-during-channel-switch-with-multiple-vaps.patch queue-4.4/ath10k-disallow-dfs-simulation-if-dfs-channel-is-not-enabled.patch

7 years, 5 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror