- Linux-stable-mirror - lists.linaro.org

Patch "ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-r8a7791-correct-parent-of-ssi-clocks.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Mon, 3 Apr 2017 11:45:42 +0200 Subject: ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit 16fe68dcab5702a024d85229ff7e98979cb701a5 ] The SSI-ALL gate clock is located in between the P clock and the individual SSI[0-9] clocks, hence the former should be listed as their parent. Fixes: ee9141522dcf13f8 ("ARM: shmobile: r8a7791: add MSTP10 support on DTSI") Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Simon Horman <horms+renesas(a)verge.net.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/r8a7791.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1437,8 +1437,11 @@ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; clocks = <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, + <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, + <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, + <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, + <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&p_clk>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-4.9/arm64-dts-r8a7796-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r8a7791-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r7s72100-fix-ethernet-clock-parent.patch queue-4.9/arm-dts-r8a7791-correct-parent-of-ssi-clocks.patch queue-4.9/arm-dts-silk-correct-clock-of-du1.patch queue-4.9/arm-dts-r8a7792-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-koelsch-correct-clock-frequency-of-x2-du-clock-input.patch queue-4.9/arm-dts-r8a7794-correct-clock-of-du1.patch queue-4.9/arm-dts-r8a7794-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r8a7793-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r8a7793-correct-parent-of-ssi-clocks.patch queue-4.9/arm-dts-r8a7790-correct-parent-of-ssi-clocks.patch

7 years, 6 months

1
0
0 0

Patch "ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-r8a7790-correct-parent-of-ssi-clocks.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Mon, 3 Apr 2017 11:45:41 +0200 Subject: ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit d13d4e063d4a08eb1686e890e9183dde709871bf ] The SSI-ALL gate clock is located in between the P clock and the individual SSI[0-9] clocks, hence the former should be listed as their parent. Fixes: bcde372254386872 ("ARM: shmobile: r8a7790: add MSTP10 support on DTSI") Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Simon Horman <horms+renesas(a)verge.net.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/r8a7790.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1437,8 +1437,11 @@ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; clocks = <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&p_clk>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-4.9/arm64-dts-r8a7796-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r8a7791-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r7s72100-fix-ethernet-clock-parent.patch queue-4.9/arm-dts-r8a7791-correct-parent-of-ssi-clocks.patch queue-4.9/arm-dts-silk-correct-clock-of-du1.patch queue-4.9/arm-dts-r8a7792-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-koelsch-correct-clock-frequency-of-x2-du-clock-input.patch queue-4.9/arm-dts-r8a7794-correct-clock-of-du1.patch queue-4.9/arm-dts-r8a7794-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r8a7793-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r8a7793-correct-parent-of-ssi-clocks.patch queue-4.9/arm-dts-r8a7790-correct-parent-of-ssi-clocks.patch

7 years, 6 months

1
0
0 0

Patch "ARM: dts: r7s72100: fix ethernet clock parent" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: r7s72100: fix ethernet clock parent to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-r7s72100-fix-ethernet-clock-parent.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Chris Brandt <chris.brandt(a)renesas.com> Date: Thu, 30 Mar 2017 14:16:09 -0700 Subject: ARM: dts: r7s72100: fix ethernet clock parent From: Chris Brandt <chris.brandt(a)renesas.com> [ Upstream commit 91a7c50cb4fabfba218549dfa84356069918bfbf ] Technically, the Ethernet block is run off the 133MHz Bus (B) clock, not the 33MHz Peripheral 0 (P0) clock. Fixes: 969244f9c720 ("ARM: dts: r7s72100: add ethernet clock to device tree") Signed-off-by: Chris Brandt <chris.brandt(a)renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Simon Horman <horms+renesas(a)verge.net.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/r7s72100.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -112,7 +112,7 @@ #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xfcfe0430 4>; - clocks = <&p0_clk>; + clocks = <&b_clk>; clock-indices = <R7S72100_CLK_ETHER>; clock-output-names = "ether"; }; Patches currently in stable-queue which might be from chris.brandt(a)renesas.com are queue-4.9/arm-dts-r7s72100-fix-ethernet-clock-parent.patch

7 years, 6 months

1
0
0 0

Patch "ARM: dts: omap3-n900: Fix the audio CODEC's reset pin" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: omap3-n900: Fix the audio CODEC's reset pin to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-omap3-n900-fix-the-audio-codec-s-reset-pin.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: "Andrew F. Davis" <afd(a)ti.com> Date: Wed, 29 Nov 2017 11:13:59 -0600 Subject: ARM: dts: omap3-n900: Fix the audio CODEC's reset pin From: "Andrew F. Davis" <afd(a)ti.com> [ Upstream commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 ] The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here. Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X support") Signed-off-by: Andrew F. Davis <afd(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/omap3-n900.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -510,7 +510,7 @@ tlv320aic3x: tlv320aic3x@18 { compatible = "ti,tlv320aic3x"; reg = <0x18>; - gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ ai3x-gpio-func = < 0 /* AIC3X_GPIO1_FUNC_DISABLED */ 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ @@ -527,7 +527,7 @@ tlv320aic3x_aux: tlv320aic3x@19 { compatible = "ti,tlv320aic3x"; reg = <0x19>; - gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ AVDD-supply = <&vmmc2>; DRVDD-supply = <&vmmc2>; Patches currently in stable-queue which might be from afd(a)ti.com are queue-4.9/arm-dts-omap3-n900-fix-the-audio-codec-s-reset-pin.patch queue-4.9/arm-dts-am335x-pepper-fix-the-audio-codec-s-reset-pin.patch

7 years, 6 months

1
0
0 0

Patch "ARM: dts: koelsch: Correct clock frequency of X2 DU clock input" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: koelsch: Correct clock frequency of X2 DU clock input to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-koelsch-correct-clock-frequency-of-x2-du-clock-input.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Mon, 3 Apr 2017 11:55:19 +0200 Subject: ARM: dts: koelsch: Correct clock frequency of X2 DU clock input From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit ebf06af55c7594ed1fc18469a5cddf911c40e687 ] The X2 crystal oscillator on the Koelsch development board provides a 74.25 MHz clock, not a 148.5 MHz clock. Fixes: cd21cb46e14aae3a ("ARM: shmobile: koelsch: Add DU external pixel clocks to DT") Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Acked-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas(a)ragnatech.se> Signed-off-by: Simon Horman <horms+renesas(a)verge.net.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -279,7 +279,7 @@ x2_clk: x2-clock { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <148500000>; + clock-frequency = <74250000>; }; x13_clk: x13-clock { Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-4.9/arm64-dts-r8a7796-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r8a7791-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r7s72100-fix-ethernet-clock-parent.patch queue-4.9/arm-dts-r8a7791-correct-parent-of-ssi-clocks.patch queue-4.9/arm-dts-silk-correct-clock-of-du1.patch queue-4.9/arm-dts-r8a7792-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-koelsch-correct-clock-frequency-of-x2-du-clock-input.patch queue-4.9/arm-dts-r8a7794-correct-clock-of-du1.patch queue-4.9/arm-dts-r8a7794-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r8a7793-remove-unit-address-and-reg-from-integrated-cache.patch queue-4.9/arm-dts-r8a7793-correct-parent-of-ssi-clocks.patch queue-4.9/arm-dts-r8a7790-correct-parent-of-ssi-clocks.patch

7 years, 6 months

1
0
0 0

Patch "ARM: dts: exynos: Correct Trats2 panel reset line" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: exynos: Correct Trats2 panel reset line to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-exynos-correct-trats2-panel-reset-line.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Simon Shields <simon(a)lineageos.org> Date: Tue, 21 Nov 2017 22:24:24 +1100 Subject: ARM: dts: exynos: Correct Trats2 panel reset line From: Simon Shields <simon(a)lineageos.org> [ Upstream commit 1b377924841df1e13ab5b225be3a83f807a92b52 ] Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used on early revisions of the board. Fixes: 420ae8451a22 ("ARM: dts: exynos4412-trats2: add panel node") Signed-off-by: Simon Shields <simon(a)lineageos.org> Acked-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Tested-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/exynos4412-trats2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -408,7 +408,7 @@ reg = <0>; vdd3-supply = <&lcd_vdd3_reg>; vci-supply = <&ldo25_reg>; - reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; Patches currently in stable-queue which might be from simon(a)lineageos.org are queue-4.9/arm-dts-exynos-correct-trats2-panel-reset-line.patch

7 years, 6 months

1
0
0 0

Patch "ARM: dts: bcm2835: add index to the ethernet alias" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: bcm2835: add index to the ethernet alias to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-bcm2835-add-index-to-the-ethernet-alias.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Baruch Siach <baruch(a)tkos.co.il> Date: Mon, 30 Jan 2017 20:44:39 +0200 Subject: ARM: dts: bcm2835: add index to the ethernet alias From: Baruch Siach <baruch(a)tkos.co.il> [ Upstream commit 10b6c0c2e2bb8cd1be682f8d36ef597e3419cb88 ] An alias name should have an index number even when it is the only of its type. This allows U-Boot to add the local-mac-address property. Otherwise U-Boot skips the alias. Fixes: 6a93792774 ("ARM: bcm2835: dt: Add the ethernet to the device trees") Signed-off-by: Baruch Siach <baruch(a)tkos.co.il> Acked-by: Lubomir Rintel <lkundrak(a)v3.sk> Reviewed-by: Eric Anholt <eric(a)anholt.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 2 +- arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi @@ -1,6 +1,6 @@ / { aliases { - ethernet = &ethernet; + ethernet0 = &ethernet; }; }; --- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi @@ -1,6 +1,6 @@ / { aliases { - ethernet = &ethernet; + ethernet0 = &ethernet; }; }; Patches currently in stable-queue which might be from baruch(a)tkos.co.il are queue-4.9/arm-dts-bcm2835-add-index-to-the-ethernet-alias.patch

7 years, 6 months

1
0
0 0

[GIT PULL] commits for Linux 4.9

by Sasha Levin

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi Greg, Pleae pull commits for Linux 4.9 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit c426a717c3c633c743bfa84af902012aa84063f4: Linux 4.9.85 (2018-02-28 10:18:34 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-4.9-15032018 for you to fetch changes up to 17e3a8f890e0b5b906f458153c9072306f2e64f6: ima: relax requiring a file signature for new files with zero length (2018-03-13 16:21:05 -0400) - ---------------------------------------------------------------- for-greg-4.9-15032018 - ---------------------------------------------------------------- Aaron Salter (1): i40e: Acquire NVM lock before reads on all devices Adiel Aloni (1): mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED Akinobu Mita (1): spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer Al Cooper (1): ARM: brcmstb: Enable ZONE_DMA for non 64-bit capable peripherals Aleksandar Markovic (1): MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters Alexander Duyck (1): i40e/i40evf: Fix use after free in Rx cleanup path Alexander Potapenko (1): selinux: check for address length in selinux_socket_bind() Alexey Kardashevskiy (2): vfio/powerpc/spapr_tce: Enforce IOMMU type compatibility check vfio/spapr_tce: Check kzalloc() return when preregistering memory Andreas Pape (1): batman-adv: handle race condition for claims between gateways Andrew F. Davis (2): ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin ARM: dts: omap3-n900: Fix the audio CODEC's reset pin Andrew Lunn (1): net/faraday: Add missing include of of.h Andrey Rusalin (1): NFC: pn533: change order of free_irq and dev unregistration Andrey Vagin (1): net/8021q: create device with all possible features in wanted_features Andy Lutomirski (1): x86/boot/32: Defer resyncing initial_page_table until per-cpu is set up Aneesh Kumar K.V (1): powerpc/mm/hugetlb: Filter out hugepage size not supported by page table layout Anton Blanchard (1): powerpc: Avoid taking a data miss on every userspace instruction miss Anton Sviridenko (1): [media] solo6x10: release vb2 buffers in solo_stop_streaming() Arnaldo Carvalho de Melo (1): perf trace: Handle unpaired raw_syscalls:sys_exit event Arnd Bergmann (2): soc/tegra: Fix link errors with PMC disabled lkdtm: turn off kcov for lkdtm_rodata_do_nothing: Arvind Yadav (1): omapfb: dss: Handle return errors in dss_init_ports() Axel Lin (1): pwm: stmpe: Fix wrong register offset for hwpwm=2 case Bart Van Assche (1): scsi: core: scsi_get_device_flags_keyed(): Always return device flags Baruch Siach (1): ARM: dts: bcm2835: add index to the ethernet alias Ben Greear (1): ath10k: fix invalid STS_CAP_OFFSET_MASK Bjorn Andersson (1): leds: pm8058: Silence pointer to integer size warning Borislav Petkov (2): perf stat: Issue a HW watchdog disable hint kvm/svm: Setup MCG_CAP on AMD properly Brian King (1): scsi: ipr: Fix missed EH wakeup Changbin Du (1): perf sort: Fix segfault with basic block 'cycles' sort dimension Chen-Yu Tsai (4): drm/sun4i: Fix up error path cleanup for master bind function drm/sun4i: Set drm_crtc.port to the underlying TCON's output port node drm/sun4i: Fix TCON clock and regmap initialization sequence clk: sunxi-ng: a33: Add offset and minimum value for DDR1 PLL N factor Chris Brandt (1): ARM: dts: r7s72100: fix ethernet clock parent Chris Wilson (2): drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off) agp/intel: Flush all chipset writes after updating the GGTT Christophe JAILLET (2): power: supply: ab8500_charger: Fix an error handling path power: supply: ab8500_charger: Bail out in case of error in 'ab8500_charger_init_hw_registers()' Christopher James Halse Rogers (2): drm/radeon: Fail fb creation from imported dma-bufs. drm/amdgpu: Fail fb creation from imported dma-bufs. (v2) Colin Ian King (1): staging: wilc1000: add check for kmalloc allocation failure. Dan Carpenter (3): NFC: nfcmrvl: double free on error path media: cpia2: Fix a couple off by one bugs ASoC: nuc900: Fix a loop timeout test David Carrillo-Cisneros (2): perf inject: Copy events when reordering events in pipe mode perf session: Don't rely on evlist in pipe mode David Daney (2): MIPS: BPF: Quit clobbering callee saved registers in JIT code. MIPS: BPF: Fix multiple problems in JIT skb access helpers. David Engraf (1): timers, sched_clock: Update timeout for clock wrap Davide Caratti (1): sched: act_csum: don't mangle TCP and UDP GSO packets Davidlohr Bueso (1): locking/locktorture: Fix num reader/writer corner cases Dean Jenkins (1): Bluetooth: Avoid bt_accept_unlink() double unlinking Dedy Lansky (1): wil6210: fix memory access violation in wil_memcpy_from/toio_32 Dmitry Safonov (1): x86/mm: Make mmap(MAP_32BIT) work correctly Easwar Hariharan (1): IB/hfi1: Check for QSFP presence before attempting reads Emmanuel Grumbach (1): iwlwifi: mvm: rs: don't override the rate history in the search cycle Eric Dumazet (1): bonding: refine bond_fold_stats() wrap detection Eric W. Biederman (1): userns: Don't fail follow_automount based on s_user_ns Felipe Balbi (1): usb: dwc3: make sure UX_EXIT_PX is cleared Felix Manlunas (1): vxlan: vxlan dev should inherit lowerdev's gso_max_size Fugang Duan (1): net: fec: add phy-reset-gpios PROBE_DEFER check Gabriel Krisman Bertazi (1): drm: qxl: Don't alloc fbdev if emulation is not supported Ganapathi Bhat (1): mwifiex: Fix invalid port issue Gao Feng (1): tcp: sysctl: Fix a race to avoid unexpected 0 window from space Geert Uytterhoeven (11): ARM: dts: r8a7791: Remove unit-address and reg from integrated cache ARM: dts: r8a7792: Remove unit-address and reg from integrated cache ARM: dts: r8a7793: Remove unit-address and reg from integrated cache ARM: dts: r8a7794: Remove unit-address and reg from integrated cache arm64: dts: r8a7796: Remove unit-address and reg from integrated cache ARM: dts: r8a7794: Correct clock of DU1 ARM: dts: silk: Correct clock of DU1 ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks ARM: dts: r8a7793: Correct parent of SSI[0-9] clocks ARM: dts: koelsch: Correct clock frequency of X2 DU clock input Greg KH (1): eventpoll.h: fix epoll event masks H. Nikolaus Schaller (1): Input: tsc2007 - check for presence and power down tsc2007 during probe Hamad Kadmany (1): wil6210: fix protection against connections during reset Hannes Reinecke (1): scsi: sg: close race condition in sg_remove_sfp_usercontext() Heiko Carstens (1): s390/topology: fix typo in early topology code Iyappan Subramanian (1): drivers: net: xgene: Fix Rx checksum validation logic Jaegeuk Kim (1): f2fs: relax node version check for victim data in gc Jagdish Gediya (1): mtd: nand: ifc: update bufnum mask for ver >= 2.0.0 Jan Kara (1): reiserfs: Make cancel_old_flush() reliable Jani Nikula (1): drm/edid: set ELD connector type in drm_edid_to_eld() Janusz Krzysztofik (1): [media] media: i2c/soc_camera: fix ov6650 sensor getting wrong clock Javier Martinez Canillas (2): Input: qt1070 - add OF device ID table ASoC: rt5677: Add OF device ID table Jayachandran C (1): tty: amba-pl011: Fix spurious TX interrupts Jeffy Chen (1): drm/rockchip: vop: Enable pm domain before vop_initial Jiada Wang (1): dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped Jim Mattson (1): kvm: nVMX: Disallow userspace-injected exceptions in guest mode Jin Yao (1): perf evsel: Return exact sub event which failed with EPERM for wildcards Jiri Kosina (1): HID: elo: clear BTN_LEFT mapping Jitendra Bhivare (1): scsi: be2iscsi: Check tag in beiscsi_mccq_compl_wait Johan Hovold (1): zd1211rw: fix NULL-deref at probe Johannes Berg (2): iwlwifi: mvm: fix RX SKB header size and align it properly mac80211_hwsim: use per-interface power level Johannes Thumshirn (1): scsi: sg: check for valid direction before starting the request John Johansen (1): apparmor: Make path_max parameter readonly John Stultz (1): usb: dwc2: Make sure we disconnect the gadget state Josh Poimboeuf (1): powerpc/modules: Don't try to restore r2 after a sibling call Julien BOIBESSOT (1): tools/usbip: fixes build with musl libc toolchain Kefeng Wang (1): perf probe: Return errno when not hitting any event Kieran Bingham (3): [media] v4l: vsp1: Prevent multiple streamon race commencing pipeline early [media] v4l: vsp1: Register pipe with output WPF media: vsp1: Prevent suspending and resuming DRM pipelines Kirill A. Shutemov (1): mm: Fix false-positive VM_BUG_ON() in page_cache_{get,add}_speculative() Kuninori Morimoto (1): ASoC: rcar: ssi: don't set SSICR.CKDV = 000 with SSIWSR.CONT Laurent Pinchart (1): drm: rcar-du: Handle event when disabling CRTCs Laxman Dewangan (1): pwm: tegra: Increase precision in PWM rate calculation Leonid Yegoshin (1): MIPS: r2-on-r6-emu: Fix BLEZL and BGTZL identification Li Dongyang (1): scsi: ses: don't ask for diagnostic pages repeatedly during probe Liam Beguin (1): video: ARM CLCD: fix dma allocation size Lihong Yang (1): i40e: fix ethtool to get EEPROM data from X722 interface Limin Zhu (1): mwifiex: cfg80211: do not change virtual interface during scan processing Linus Walleij (1): ARM: dts: Adjust moxart IRQ controller and flags Long Li (2): PCI: hv: Properly handle PCI bus remove PCI: hv: Lock PCI bus on device eject Lorenzo Colitti (1): net: xfrm: allow clearing socket xfrm policies. Luca Coelho (1): mac80211: remove BUG() when interface type is invalid Luis R. Rodriguez (1): test_firmware: fix setting old custom fw path back on exit Mahesh Bandewar (2): bonding: make speed, duplex setting consistent with link state ipvlan: add L2 check for packets arriving via virtual devices Manikanta Pubbisetty (1): ath10k: update tdls teardown state to target Manish Jaggi (1): PCI: Apply Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices Mark Rutland (1): drivers/perf: arm_pmu: handle no platform_device Masami Hiramatsu (2): kprobes/x86: Fix kprobe-booster not to boost far call instructions kprobes/x86: Set kprobes pages read-only Matthias Kaehlcke (1): regulator: core: Limit propagation of parent voltage count and list Mauricio Faria de Oliveira (1): scsi: ses: don't get power status of SES device slot on probe Michael Chan (1): bnxt_en: Don't print "Link speed -1 no longer supported" messages. Michael Ellerman (1): powerpc/nohash: Fix use of mmu_has_feature() in setup_initial_memory_limit() Michael Hennerich (1): net: ieee802154: adf7242: Fix bug if defined DEBUG Michael Scott (1): Bluetooth: 6lowpan: fix delay work init in add_peer_chan() Michal Kalderon (1): qed: Fix TM block ILT allocation Mike Leach (1): coresight: Fixes coresight DT parse to get correct output port ID. Mimi Zohar (1): ima: relax requiring a file signature for new files with zero length Mintz, Yuval (2): qed: Always publish VF link from leading hwfn qed: Correct MSI-x for storage Miquel Raynal (1): mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]() Mitch Williams (1): i40e: only register client on iWarp-capable devices Mohammed Shafi Shajakhan (4): ath10k: fix a warning during channel switch with multiple vaps ath10k: disallow DFS simulation if DFS channel is not enabled ath10k: fix fetching channel during potential radar detection ath10k: fix compile time sanity check for CE4 buffer size Nate Watterson (1): iommu/iova: Fix underflow bug in __alloc_and_insert_iova_range NeilBrown (1): md/raid6: Fix anomily when recovering a single device in RAID6. Nicolai HÃ¤hnle (1): drm/ttm: never add BO that failed to validate to the LRU list Nik Unger (1): netem: apply correct delay when rate throttling Oliver Neukum (1): usb: misc: lvs: fix race condition in disconnect handling Pan Xinhui (1): powerpc/xmon: Fix an unexpected xmon on/off state change Paul E. McKenney (2): sched: Stop switched_to_rt() from sending IPIs to offline CPUs sched: Stop resched_cpu() from sending IPIs to offline CPUs Peter Ujfalusi (1): dmaengine: bcm2835-dma: Use vchan_terminate_vdesc() instead of desc_free Peter Zijlstra (1): rtmutex: Fix PI chain order integrity Petr Mladek (1): printk: Correctly handle preemption in console_unlock() Phil Turnbull (1): fm10k: correctly check if interface is removed Prarit Bhargava (1): PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown() Quan Nguyen (3): drivers: net: xgene: Fix hardware checksum setting drivers: net: phy: xgene: Fix mdio write drivers: net: xgene: Fix wrong logical operation Rafael J. Wysocki (1): cpufreq: Fix governor module removal race Rajendra Nayak (1): clk: qcom: msm8996: Fix the vfe1 powerdomain name Ravi Bangoria (1): perf probe: Fix concat_probe_trace_events Rob Herring (1): of: fix of_device_get_modalias returned length when truncating buffers Roger Quadros (1): ARM: DRA7: hwmod_data: Prevent wait_target_disable error for usb_otg_ss Samuel Thibault (1): braille-console: Fix value returned by _braille_console_setup Satish Kharat (1): scsi: fnic: Fix for "Number of Active IOs" in fnicstats becoming negative SeongJae Park (1): rcutorture/configinit: Fix build directory error message Shaohua Li (1): blk-throttle: make sure expire time isn't too big Shikhar Dogra (1): driver: (adm1275) set the m,b and R coefficients correctly for power Simon Shields (1): ARM: dts: exynos: Correct Trats2 panel reset line Sinclair Yeh (1): drm/vmwgfx: Fixes to vmwgfx_fb Srinivas Kandagatla (1): clk: qcom: msm8916: fix mnd_width for codec_digcodec Stefan Wahren (1): ARM: bcm2835: Enable missing CMA settings for VC4 driver Stephane Eranian (2): perf tools: Make perf_event__synthesize_mmap_events() scale perf stat: Fix bug in handling events in error state Stephen Hemminger (1): veth: set peer GSO values Steve Lin (1): net: ethernet: bgmac: Allow MAC address to be specified in DTB Subhransu S. Prusty (1): ALSA: hda: Add Geminilake id to SKL_PLUS Sunil Goutham (1): net: thunderx: Set max queue count taking XDP_TX into account Taeung Song (1): perf annotate: Fix a bug following symbolic link of a build-id file Takashi Sakamoto (3): ALSA: firewire-lib: add a quirk of packet without valid EOH in CIP format ALSA: firewire-digi00x: add support for console models of Digi00x series ALSA: firewire-digi00x: handle all MIDI messages on streaming packets Thomas Petazzoni (1): net: mvpp2: set dma mask and coherent dma mask on PPv2.2 Thor Thayer (1): EDAC, altera: Fix peripheral warnings for Cyclone5 Tobias Jordan (1): spi: sun6i: disable/unprepare clocks on remove Tobias Klauser (1): NFC: nfcmrvl: Include unaligned.h instead of access_ok.h Tom Hromatka (1): sysrq: Reset the watchdog timers while displaying high-resolution timers Tomasz Kramkowski (1): HID: clamp input to logical range if no null state Tommi Rantala (1): perf buildid: Do not assume that readlink() returns a null terminated string Uwe Kleine-KÃ¶nig (1): serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off Valtteri HeikkilÃ¤ (1): HID: reject input outside logical range only if null state is set Varsha Rao (1): staging: speakup: Replace BUG_ON() with WARN_ON(). Ville SyrjÃ¤lÃ¤ (1): video/hdmi: Allow "empty" HDMI infoframes Vincent StehlÃ© (1): regulator: isl9305: fix array size Xose Vazquez Perez (2): scsi: devinfo: apply to HP XP the same flags as Hitachi VSP scsi: dh: add new rdac devices Xunlei Pang (1): x86/mce: Handle broadcasted MCE gracefully with kexec Yazen Ghannam (1): x86/mce: Init some CPU features early Yixun Lan (1): clk: meson: gxbb: fix wrong clock for SARADC/SANA Yong Zhao (1): drm/amdkfd: Fix memory leaks in kfd topology Yuyang Du (1): usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in dummy_hub_control() Zhilong Liu (1): md.c:didn't unlock the mddev before return EINVAL in array_size_store lipeng (1): net: hns: Correct HNS RSS key set function arch/arm/boot/dts/am335x-pepper.dts | 2 +- arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 2 +- arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 2 +- arch/arm/boot/dts/exynos4412-trats2.dts | 2 +- arch/arm/boot/dts/moxart-uc7112lx.dts | 2 +- arch/arm/boot/dts/moxart.dtsi | 17 ++--- arch/arm/boot/dts/omap3-n900.dts | 4 +- arch/arm/boot/dts/r7s72100.dtsi | 2 +- arch/arm/boot/dts/r8a7790.dtsi | 7 +- arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +- arch/arm/boot/dts/r8a7791.dtsi | 10 +-- arch/arm/boot/dts/r8a7792.dtsi | 3 +- arch/arm/boot/dts/r8a7793.dtsi | 10 +-- arch/arm/boot/dts/r8a7794-silk.dts | 2 +- arch/arm/boot/dts/r8a7794.dtsi | 5 +- arch/arm/configs/bcm2835_defconfig | 4 +- arch/arm/mach-bcm/Kconfig | 1 + arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 2 + arch/arm64/boot/dts/renesas/r8a7796.dtsi | 3 +- arch/mips/kernel/mips-r2-to-r6-emul.c | 16 ++++- arch/mips/net/bpf_jit.c | 16 +++-- arch/mips/net/bpf_jit_asm.S | 23 +++---- arch/powerpc/include/asm/code-patching.h | 1 + arch/powerpc/kernel/module_64.c | 12 +++- arch/powerpc/lib/code-patching.c | 5 ++ arch/powerpc/mm/fault.c | 2 +- arch/powerpc/mm/hugetlbpage.c | 18 +++++ arch/powerpc/mm/tlb_nohash.c | 2 +- arch/powerpc/xmon/xmon.c | 17 +++-- arch/s390/kernel/early.c | 2 +- arch/x86/include/asm/reboot.h | 1 + arch/x86/kernel/cpu/mcheck/mce.c | 48 ++++++++++---- arch/x86/kernel/kprobes/core.c | 6 ++ arch/x86/kernel/kprobes/opt.c | 3 + arch/x86/kernel/reboot.c | 5 +- arch/x86/kernel/setup.c | 15 ----- arch/x86/kernel/setup_percpu.c | 21 ++++++ arch/x86/kernel/sys_x86_64.c | 4 +- arch/x86/kvm/svm.c | 7 ++ arch/x86/kvm/x86.c | 3 +- block/blk-throttle.c | 11 ++++ drivers/char/agp/intel-gtt.c | 2 + drivers/clk/meson/gxbb.c | 4 +- drivers/clk/qcom/gcc-msm8916.c | 1 + drivers/clk/qcom/mmcc-msm8996.c | 2 +- drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 18 +++-- drivers/cpufreq/cpufreq.c | 6 ++ drivers/dma/bcm2835-dma.c | 10 ++- drivers/dma/imx-sdma.c | 17 ++++- drivers/edac/altera_edac.c | 22 +++++-- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 6 ++ drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 10 +++ drivers/gpu/drm/drm_edid.c | 9 ++- drivers/gpu/drm/drm_irq.c | 14 +++- drivers/gpu/drm/qxl/qxl_fb.c | 9 ++- drivers/gpu/drm/radeon/radeon_display.c | 6 ++ drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 7 ++ drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 29 ++++++--- drivers/gpu/drm/sun4i/sun4i_crtc.c | 5 ++ drivers/gpu/drm/sun4i/sun4i_drv.c | 16 +++-- drivers/gpu/drm/sun4i/sun4i_tcon.c | 22 +++++-- drivers/gpu/drm/ttm/ttm_bo.c | 12 ++-- drivers/gpu/drm/vmwgfx/vmwgfx_fb.c | 4 +- drivers/hid/hid-elo.c | 6 ++ drivers/hid/hid-input.c | 20 ++++-- drivers/hwmon/pmbus/adm1275.c | 4 +- drivers/hwtracing/coresight/of_coresight.c | 2 +- drivers/infiniband/hw/hfi1/chip.c | 7 +- drivers/input/keyboard/qt1070.c | 9 +++ drivers/input/touchscreen/tsc2007.c | 8 +++ drivers/iommu/iova.c | 2 +- drivers/leds/leds-pm8058.c | 2 +- drivers/md/md.c | 4 +- drivers/md/raid5.c | 13 +++- drivers/media/i2c/soc_camera/ov6650.c | 2 +- drivers/media/pci/solo6x10/solo6x10-v4l2.c | 11 ++++ drivers/media/platform/vsp1/vsp1_drm.c | 1 + drivers/media/platform/vsp1/vsp1_drv.c | 16 ++++- drivers/media/platform/vsp1/vsp1_video.c | 13 ++++ drivers/media/usb/cpia2/cpia2_v4l.c | 4 +- drivers/misc/Makefile | 2 + drivers/misc/enclosure.c | 7 +- drivers/mtd/nand/fsl_ifc_nand.c | 7 ++ drivers/mtd/nand/nand_base.c | 9 ++- drivers/net/bonding/bond_main.c | 35 ++++++---- drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 1 + drivers/net/ethernet/apm/xgene/xgene_enet_hw.h | 1 + drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 31 +++++---- drivers/net/ethernet/broadcom/bgmac-bcma.c | 39 ++++++----- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 ++- drivers/net/ethernet/cavium/thunder/nicvf_main.c | 5 ++ drivers/net/ethernet/faraday/ftgmac100.c | 1 + drivers/net/ethernet/freescale/fec_main.c | 26 +++++--- drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c | 23 ++++--- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 9 ++- drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c | 2 +- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 5 ++ drivers/net/ethernet/intel/i40e/i40e_main.c | 19 +++--- drivers/net/ethernet/intel/i40e/i40e_nvm.c | 12 ++-- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 1 + drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 1 + drivers/net/ethernet/marvell/mvpp2.c | 14 ++++ drivers/net/ethernet/qlogic/qed/qed_cxt.c | 32 +++++++-- drivers/net/ethernet/qlogic/qed/qed_main.c | 3 +- drivers/net/ethernet/qlogic/qed/qed_sriov.c | 13 +++- drivers/net/ieee802154/adf7242.c | 4 +- drivers/net/ipvlan/ipvlan_core.c | 4 ++ drivers/net/phy/mdio-xgene.c | 2 +- drivers/net/veth.c | 3 + drivers/net/vxlan.c | 5 ++ drivers/net/wireless/ath/ath10k/ce.c | 2 +- drivers/net/wireless/ath/ath10k/debug.c | 9 +++ drivers/net/wireless/ath/ath10k/mac.c | 12 +++- drivers/net/wireless/ath/ath10k/wmi.c | 5 ++ drivers/net/wireless/ath/ath10k/wmi.h | 3 +- drivers/net/wireless/ath/wil6210/main.c | 20 +++++- drivers/net/wireless/ath/wil6210/wmi.c | 11 +++- drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 4 +- drivers/net/wireless/intel/iwlwifi/mvm/rx.c | 18 ++++- drivers/net/wireless/mac80211_hwsim.c | 26 ++++---- drivers/net/wireless/marvell/mwifiex/cfg80211.c | 6 ++ drivers/net/wireless/marvell/mwifiex/sdio.c | 4 +- drivers/net/wireless/zydas/zd1211rw/zd_usb.c | 3 + drivers/nfc/nfcmrvl/fw_dnld.c | 2 +- drivers/nfc/nfcmrvl/spi.c | 5 +- drivers/nfc/pn533/i2c.c | 4 +- drivers/of/device.c | 2 +- drivers/pci/host/pci-hyperv.c | 24 ++++++- drivers/pci/pci-driver.c | 2 - drivers/pci/quirks.c | 3 + drivers/perf/arm_pmu.c | 12 +++- drivers/power/supply/ab8500_charger.c | 6 +- drivers/pwm/pwm-stmpe.c | 2 +- drivers/pwm/pwm-tegra.c | 7 +- drivers/regulator/core.c | 9 ++- drivers/scsi/be2iscsi/be_cmds.c | 6 ++ drivers/scsi/fnic/fnic_scsi.c | 16 +++-- drivers/scsi/ipr.c | 16 +++-- drivers/scsi/scsi_devinfo.c | 9 +-- drivers/scsi/scsi_dh.c | 5 +- drivers/scsi/ses.c | 12 ++-- drivers/scsi/sg.c | 58 +++++++++++++---- drivers/spi/spi-omap2-mcspi.c | 9 +-- drivers/spi/spi-sun6i.c | 2 +- drivers/staging/speakup/kobjects.c | 8 ++- drivers/staging/wilc1000/host_interface.c | 2 + drivers/tty/serial/amba-pl011.c | 23 ++++--- drivers/tty/serial/imx.c | 36 ++++++---- drivers/usb/dwc2/hcd.c | 1 + drivers/usb/dwc3/core.c | 6 ++ drivers/usb/dwc3/core.h | 1 + drivers/usb/gadget/udc/dummy_hcd.c | 20 +++--- drivers/usb/misc/lvstest.c | 1 + drivers/vfio/vfio_iommu_spapr_tce.c | 13 ++++ drivers/video/fbdev/amba-clcd.c | 4 +- drivers/video/fbdev/omap2/omapfb/dss/dss.c | 16 +++-- drivers/video/hdmi.c | 51 +++++++++------ fs/f2fs/gc.c | 6 +- fs/namei.c | 3 - fs/reiserfs/journal.c | 2 +- fs/reiserfs/reiserfs.h | 1 + fs/reiserfs/super.c | 21 ++++-- include/linux/pagemap.h | 4 +- include/linux/platform_data/isl9305.h | 2 +- include/linux/regulator/driver.h | 2 + include/net/tcp.h | 8 ++- include/soc/tegra/pmc.h | 29 ++++++--- include/uapi/linux/eventpoll.h | 8 +-- kernel/locking/locktorture.c | 76 +++++++++++++--------- kernel/locking/rtmutex.c | 29 ++++++++- kernel/locking/rtmutex_common.h | 1 + kernel/printk/braille.c | 15 +++-- kernel/printk/braille.h | 13 +++- kernel/printk/printk.c | 8 ++- kernel/sched/core.c | 3 +- kernel/sched/rt.c | 2 +- kernel/time/sched_clock.c | 5 ++ kernel/time/timer_list.c | 6 ++ net/8021q/vlan_dev.c | 3 +- net/batman-adv/bridge_loop_avoidance.c | 20 ++++-- net/bluetooth/6lowpan.c | 10 ++- net/bluetooth/af_bluetooth.c | 24 +++++++ net/mac80211/iface.c | 2 +- net/sched/act_csum.c | 12 ++++ net/sched/sch_netem.c | 26 +++++--- net/xfrm/xfrm_policy.c | 2 +- net/xfrm/xfrm_state.c | 7 ++ security/apparmor/lsm.c | 2 +- security/integrity/ima/ima_appraise.c | 3 +- security/selinux/hooks.c | 8 +++ sound/firewire/amdtp-stream.c | 5 +- sound/firewire/amdtp-stream.h | 3 + sound/firewire/digi00x/amdtp-dot.c | 55 +++++++++++----- sound/firewire/digi00x/digi00x.c | 13 +++- sound/firewire/digi00x/digi00x.h | 1 + sound/pci/hda/hda_intel.c | 4 +- sound/soc/codecs/rt5677.c | 7 ++ sound/soc/nuc900/nuc900-ac97.c | 4 +- sound/soc/sh/rcar/ssi.c | 9 +++ tools/perf/builtin-probe.c | 6 +- tools/perf/builtin-stat.c | 23 ++++++- tools/perf/builtin-trace.c | 43 +++++++++--- tools/perf/util/annotate.c | 10 ++- tools/perf/util/build-id.c | 6 +- tools/perf/util/event.c | 4 +- tools/perf/util/evsel.c | 12 +++- tools/perf/util/ordered-events.c | 3 +- tools/perf/util/probe-event.c | 2 +- tools/perf/util/session.c | 17 ++++- tools/perf/util/sort.c | 5 ++ tools/testing/selftests/firmware/fw_filesystem.sh | 5 +- .../testing/selftests/rcutorture/bin/configinit.sh | 2 +- tools/usb/usbip/src/usbipd.c | 2 +- 213 files changed, 1548 insertions(+), 573 deletions(-) -----BEGIN PGP SIGNATURE----- iQIcBAEBCAAGBQJaqvZlAAoJEN6mb/eXdyzcc9wP+gMgFLpHt3YZwL8rQCpQecKC YZNZFq3YhmKQqq3XJut4H+gmHhZzsTL469ZVZ2uEyG4cXEwKkWvQtUjx2rKlR/vY anVStCtWIU3P6Yi+SysDL8fh34mUiwtQPDYU5GFbPNTWYhIo6wRuZmyJDNixtHvt cajvBt5L90h7xhu5o7FNDyZh3ppe4e6QNM9G6bEicZ9PcckuXn2e3uWGyeUOcRJD ntPhm4pntcOiyRytLgYabfjc+S7WoQxs63A+CpPfo1uWSAcsyjyXsnAx/XxtN9UC CS3Df0GV0tA0roYAfJoult3ubjyX+RPm8yCofMBdLY89OuMvn5t0NGYs4MUCtJWS jeQu6ssjSboiIxp5ge6jo8I/CQHV+ZES3gmuZSq7MaocDq0+7q9l+qSVZRJ35rEV PungqrQdZNLb/nven+FlRFC8E/nhrzTIptfKD3baTDSjy/uu/alLBMldyJsfLDhP e9HfCBVnpKUBEeDbEkuc8h7wFiqe75qIvrYUeX+JqNhczUYfh7Dsct4xSp9xIwmA TaLd7KyqCoJbwvWHYud8Z4DlRC/wuITHvTbR/R8/dCCKy1feMgQb9nTwFMsV6o0o 4xk6yFPmM0hEA4fIXvNoDO1r66Ql3x0S11Dn8/8MI7vRhZK/1g5qLw1FYaMPKGeJ zFBMVwXJwh8hDgiEDJCM =A11n -----END PGP SIGNATURE-----

7 years, 6 months

2
1
0 0

Patch "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-am335x-pepper-fix-the-audio-codec-s-reset-pin.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: "Andrew F. Davis" <afd(a)ti.com> Date: Wed, 29 Nov 2017 11:13:56 -0600 Subject: ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin From: "Andrew F. Davis" <afd(a)ti.com> [ Upstream commit e153db03c6b7a035c797bcdf35262586f003ee93 ] The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here. Fixes: 4341881d0562 ("ARM: dts: Add devicetree for Gumstix Pepper board") Signed-off-by: Andrew F. Davis <afd(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am335x-pepper.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -139,7 +139,7 @@ &audio_codec { status = "okay"; - gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; AVDD-supply = <&ldo3_reg>; IOVDD-supply = <&ldo3_reg>; DRVDD-supply = <&ldo3_reg>; Patches currently in stable-queue which might be from afd(a)ti.com are queue-4.9/arm-dts-omap3-n900-fix-the-audio-codec-s-reset-pin.patch queue-4.9/arm-dts-am335x-pepper-fix-the-audio-codec-s-reset-pin.patch

7 years, 6 months

1
0
0 0

Patch "ARM: dts: Adjust moxart IRQ controller and flags" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Adjust moxart IRQ controller and flags to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-adjust-moxart-irq-controller-and-flags.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Mar 18 16:55:33 CET 2018 From: Linus Walleij <linus.walleij(a)linaro.org> Date: Sat, 18 Mar 2017 17:40:01 +0100 Subject: ARM: dts: Adjust moxart IRQ controller and flags From: Linus Walleij <linus.walleij(a)linaro.org> [ Upstream commit c2a736b698008d296c5010ec39077eeb5796109f ] The moxart interrupt line flags were not respected in previous driver: instead of assigning them per-consumer, a fixes mask was set in the controller. With the migration to a standard Faraday driver we need to set up and handle the consumer flags correctly. Also remove the Moxart-specific flags when switching to using real consumer flags. Extend the register window to 0x100 bytes as we may have a few more registers in there and it doesn't hurt. Tested-by: Jonas Jensen <jonas.jensen(a)gmail.com> Signed-off-by: Jonas Jensen <jonas.jensen(a)gmail.com> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Olof Johansson <olof(a)lixom.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/moxart-uc7112lx.dts | 2 +- arch/arm/boot/dts/moxart.dtsi | 17 +++++++++-------- 2 files changed, 10 insertions(+), 9 deletions(-) --- a/arch/arm/boot/dts/moxart-uc7112lx.dts +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts @@ -6,7 +6,7 @@ */ /dts-v1/; -/include/ "moxart.dtsi" +#include "moxart.dtsi" / { model = "MOXA UC-7112-LX"; --- a/arch/arm/boot/dts/moxart.dtsi +++ b/arch/arm/boot/dts/moxart.dtsi @@ -6,6 +6,7 @@ */ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "moxa,moxart"; @@ -36,8 +37,8 @@ ranges; intc: interrupt-controller@98800000 { - compatible = "moxa,moxart-ic"; - reg = <0x98800000 0x38>; + compatible = "moxa,moxart-ic", "faraday,ftintc010"; + reg = <0x98800000 0x100>; interrupt-controller; #interrupt-cells = <2>; interrupt-mask = <0x00080000>; @@ -59,7 +60,7 @@ timer: timer@98400000 { compatible = "moxa,moxart-timer"; reg = <0x98400000 0x42>; - interrupts = <19 1>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; clocks = <&clk_apb>; }; @@ -80,7 +81,7 @@ dma: dma@90500000 { compatible = "moxa,moxart-dma"; reg = <0x90500080 0x40>; - interrupts = <24 0>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; }; @@ -93,7 +94,7 @@ sdhci: sdhci@98e00000 { compatible = "moxa,moxart-sdhci"; reg = <0x98e00000 0x5C>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_apb>; dmas = <&dma 5>, <&dma 5>; @@ -120,7 +121,7 @@ mac0: mac@90900000 { compatible = "moxa,moxart-mac"; reg = <0x90900000 0x90>; - interrupts = <25 0>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; phy-handle = <&ethphy0>; phy-mode = "mii"; status = "disabled"; @@ -129,7 +130,7 @@ mac1: mac@92000000 { compatible = "moxa,moxart-mac"; reg = <0x92000000 0x90>; - interrupts = <27 0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; phy-handle = <&ethphy1>; phy-mode = "mii"; status = "disabled"; @@ -138,7 +139,7 @@ uart0: uart@98200000 { compatible = "ns16550a"; reg = <0x98200000 0x20>; - interrupts = <31 8>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clock-frequency = <14745600>; Patches currently in stable-queue which might be from linus.walleij(a)linaro.org are queue-4.9/arm-dts-adjust-moxart-irq-controller-and-flags.patch queue-4.9/leds-pm8058-silence-pointer-to-integer-size-warning.patch queue-4.9/pwm-stmpe-fix-wrong-register-offset-for-hwpwm-2-case.patch

7 years, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror