- Linux-stable-mirror - lists.linaro.org

Patch "xprtrdma: Fix BUG after a device removal" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xprtrdma: Fix BUG after a device removal to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xprtrdma-fix-bug-after-a-device-removal.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e89e8d8fcdc6751e86ccad794b052fe67e6ad619 Mon Sep 17 00:00:00 2001 From: Chuck Lever <chuck.lever(a)oracle.com> Date: Wed, 31 Jan 2018 12:34:13 -0500 Subject: xprtrdma: Fix BUG after a device removal From: Chuck Lever <chuck.lever(a)oracle.com> commit e89e8d8fcdc6751e86ccad794b052fe67e6ad619 upstream. Michal Kalderon reports a BUG that occurs just after device removal: [ 169.112490] rpcrdma: removing device qedr0 for 192.168.110.146:20049 [ 169.143909] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 169.181837] IP: rpcrdma_dma_unmap_regbuf+0xa/0x60 [rpcrdma] The RPC/RDMA client transport attempts to allocate some resources on demand. Registered buffers are one such resource. These are allocated (or re-allocated) by xprt_rdma_allocate to hold RPC Call and Reply messages. A hardware resource is associated with each of these buffers, as they can be used for a Send or Receive Work Request. If a device is removed from under an NFS/RDMA mount, the transport layer is responsible for releasing all hardware resources before the device can be finally unplugged. A BUG results when the NFS mount hasn't yet seen much activity: the transport tries to release resources that haven't yet been allocated. rpcrdma_free_regbuf() already checks for this case, so just move that check to cover the DEVICE_REMOVAL case as well. Reported-by: Michal Kalderon <Michal.Kalderon(a)cavium.com> Fixes: bebd031866ca ("xprtrdma: Support unplugging an HCA ...") Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> Tested-by: Michal Kalderon <Michal.Kalderon(a)cavium.com> Cc: stable(a)vger.kernel.org # v4.12+ Signed-off-by: Anna Schumaker <Anna.Schumaker(a)Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/sunrpc/xprtrdma/verbs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -1331,6 +1331,9 @@ __rpcrdma_dma_map_regbuf(struct rpcrdma_ static void rpcrdma_dma_unmap_regbuf(struct rpcrdma_regbuf *rb) { + if (!rb) + return; + if (!rpcrdma_regbuf_is_mapped(rb)) return; @@ -1346,9 +1349,6 @@ rpcrdma_dma_unmap_regbuf(struct rpcrdma_ void rpcrdma_free_regbuf(struct rpcrdma_regbuf *rb) { - if (!rb) - return; - rpcrdma_dma_unmap_regbuf(rb); kfree(rb); } Patches currently in stable-queue which might be from chuck.lever(a)oracle.com are queue-4.14/xprtrdma-fix-bug-after-a-device-removal.patch queue-4.14/xprtrdma-fix-calculation-of-ri_max_send_sges.patch

7 years, 4 months

1
0
0 0

Patch "target/iscsi: avoid NULL dereference in CHAP auth error path" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled target/iscsi: avoid NULL dereference in CHAP auth error path to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: target-iscsi-avoid-null-dereference-in-chap-auth-error-path.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ce512d79d0466a604793addb6b769d12ee326822 Mon Sep 17 00:00:00 2001 From: David Disseldorp <ddiss(a)suse.de> Date: Wed, 13 Dec 2017 18:22:30 +0100 Subject: target/iscsi: avoid NULL dereference in CHAP auth error path From: David Disseldorp <ddiss(a)suse.de> commit ce512d79d0466a604793addb6b769d12ee326822 upstream. If chap_server_compute_md5() fails early, e.g. via CHAP_N mismatch, then crypto_free_shash() is called with a NULL pointer which gets dereferenced in crypto_shash_tfm(). Fixes: 69110e3cedbb ("iscsi-target: Use shash and ahash") Suggested-by: Markus Elfring <elfring(a)users.sourceforge.net> Signed-off-by: David Disseldorp <ddiss(a)suse.de> Cc: stable(a)vger.kernel.org # 4.6+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/target/iscsi/iscsi_target_auth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/target/iscsi/iscsi_target_auth.c +++ b/drivers/target/iscsi/iscsi_target_auth.c @@ -421,7 +421,8 @@ static int chap_server_compute_md5( auth_ret = 0; out: kzfree(desc); - crypto_free_shash(tfm); + if (tfm) + crypto_free_shash(tfm); kfree(challenge); kfree(challenge_binhex); return auth_ret; Patches currently in stable-queue which might be from ddiss(a)suse.de are queue-4.14/target-iscsi-avoid-null-dereference-in-chap-auth-error-path.patch

7 years, 4 months

1
0
0 0

Patch "rtlwifi: rtl8821ae: Fix connection lost problem correctly" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtlwifi: rtl8821ae: Fix connection lost problem correctly to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtlwifi-rtl8821ae-fix-connection-lost-problem-correctly.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c713fb071edc0efc01a955f65a006b0e1795d2eb Mon Sep 17 00:00:00 2001 From: Larry Finger <Larry.Finger(a)lwfinger.net> Date: Mon, 5 Feb 2018 12:38:11 -0600 Subject: rtlwifi: rtl8821ae: Fix connection lost problem correctly From: Larry Finger <Larry.Finger(a)lwfinger.net> commit c713fb071edc0efc01a955f65a006b0e1795d2eb upstream. There has been a coding error in rtl8821ae since it was first introduced, namely that an 8-bit register was read using a 16-bit read in _rtl8821ae_dbi_read(). This error was fixed with commit 40b368af4b75 ("rtlwifi: Fix alignment issues"); however, this change led to instability in the connection. To restore stability, this change was reverted in commit b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem"). Unfortunately, the unaligned access causes machine checks in ARM architecture, and we were finally forced to find the actual cause of the problem on x86 platforms. Following a suggestion from Pkshih <pkshih(a)realtek.com>, it was found that increasing the ASPM L1 latency from 0 to 7 fixed the instability. This parameter was varied to see if a smaller value would work; however, it appears that 7 is the safest value. A new symbol is defined for this quantity, thus it can be easily changed if necessary. Fixes: b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem") Cc: Stable <stable(a)vger.kernel.org> # 4.14+ Fix-suggested-by: Pkshih <pkshih(a)realtek.com> Signed-off-by: Larry Finger <Larry.Finger(a)lwfinger.net> Tested-by: James Cameron <quozl(a)laptop.org> # x86_64 OLPC NL3 Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 5 +++-- drivers/net/wireless/realtek/rtlwifi/wifi.h | 1 + 2 files changed, 4 insertions(+), 2 deletions(-) --- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c @@ -1122,7 +1122,7 @@ static u8 _rtl8821ae_dbi_read(struct rtl } if (0 == tmp) { read_addr = REG_DBI_RDATA + addr % 4; - ret = rtl_read_word(rtlpriv, read_addr); + ret = rtl_read_byte(rtlpriv, read_addr); } return ret; } @@ -1164,7 +1164,8 @@ static void _rtl8821ae_enable_aspm_back_ } tmp = _rtl8821ae_dbi_read(rtlpriv, 0x70f); - _rtl8821ae_dbi_write(rtlpriv, 0x70f, tmp | BIT(7)); + _rtl8821ae_dbi_write(rtlpriv, 0x70f, tmp | BIT(7) | + ASPM_L1_LATENCY << 3); tmp = _rtl8821ae_dbi_read(rtlpriv, 0x719); _rtl8821ae_dbi_write(rtlpriv, 0x719, tmp | BIT(3) | BIT(4)); --- a/drivers/net/wireless/realtek/rtlwifi/wifi.h +++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h @@ -99,6 +99,7 @@ #define RTL_USB_MAX_RX_COUNT 100 #define QBSS_LOAD_SIZE 5 #define MAX_WMMELE_LENGTH 64 +#define ASPM_L1_LATENCY 7 #define TOTAL_CAM_ENTRY 32 Patches currently in stable-queue which might be from Larry.Finger(a)lwfinger.net are queue-4.14/rtlwifi-rtl8821ae-fix-connection-lost-problem-correctly.patch

7 years, 4 months

1
0
0 0

Patch "qxl: alloc & use shadow for dumb buffers" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qxl: alloc & use shadow for dumb buffers to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qxl-alloc-use-shadow-for-dumb-buffers.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 62676d10b483a2ff6e8b08c5e7c7d63a831343f5 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann <kraxel(a)redhat.com> Date: Thu, 19 Oct 2017 08:21:50 +0200 Subject: qxl: alloc & use shadow for dumb buffers From: Gerd Hoffmann <kraxel(a)redhat.com> commit 62676d10b483a2ff6e8b08c5e7c7d63a831343f5 upstream. This patch changes the way the primary surface is used for dumb framebuffers. Instead of configuring the bo itself as primary surface a shadow bo is created and used instead. Framebuffers can share the shadow bo in case they have the same format and resolution. On atomic plane updates we don't have to update the primary surface in case we pageflip from one framebuffer to another framebuffer which shares the same shadow. This in turn avoids the flicker caused by the primary-destroy + primary-create cycle, which is very annonying when running wayland on qxl. The qxl driver never actually writes to the shadow bo. It sends qxl blit commands which update it though, and the spice server might actually execute them (and thereby write to the shadow) in case the local rendering is kicked for some reason. This happens for example in case qemu is asked to write out a dump of the guest display (screendump monitor command). Signed-off-by: Gerd Hoffmann <kraxel(a)redhat.com> Reviewed-by: Dave Airlie <airlied(a)redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20171019062150.28090-3-kraxel@… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/qxl/qxl_cmd.c | 6 +++- drivers/gpu/drm/qxl/qxl_display.c | 49 +++++++++++++++++++++++++++++++++++--- drivers/gpu/drm/qxl/qxl_drv.h | 2 + drivers/gpu/drm/qxl/qxl_dumb.c | 1 4 files changed, 54 insertions(+), 4 deletions(-) --- a/drivers/gpu/drm/qxl/qxl_cmd.c +++ b/drivers/gpu/drm/qxl/qxl_cmd.c @@ -388,7 +388,11 @@ void qxl_io_create_primary(struct qxl_de create->width = bo->surf.width; create->height = bo->surf.height; create->stride = bo->surf.stride; - create->mem = qxl_bo_physical_address(qdev, bo, offset); + if (bo->shadow) { + create->mem = qxl_bo_physical_address(qdev, bo->shadow, offset); + } else { + create->mem = qxl_bo_physical_address(qdev, bo, offset); + } QXL_INFO(qdev, "%s: mem = %llx, from %p\n", __func__, create->mem, bo->kptr); --- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -305,7 +305,9 @@ static const struct drm_crtc_funcs qxl_c void qxl_user_framebuffer_destroy(struct drm_framebuffer *fb) { struct qxl_framebuffer *qxl_fb = to_qxl_framebuffer(fb); + struct qxl_bo *bo = gem_to_qxl_bo(qxl_fb->obj); + WARN_ON(bo->shadow); drm_gem_object_unreference_unlocked(qxl_fb->obj); drm_framebuffer_cleanup(fb); kfree(qxl_fb); @@ -508,6 +510,7 @@ static void qxl_primary_atomic_update(st .x2 = qfb->base.width, .y2 = qfb->base.height }; + bool same_shadow = false; if (old_state->fb) { qfb_old = to_qxl_framebuffer(old_state->fb); @@ -519,15 +522,23 @@ static void qxl_primary_atomic_update(st if (bo == bo_old) return; + if (bo_old && bo_old->shadow && bo->shadow && + bo_old->shadow == bo->shadow) { + same_shadow = true; + } + if (bo_old && bo_old->is_primary) { - qxl_io_destroy_primary(qdev); + if (!same_shadow) + qxl_io_destroy_primary(qdev); bo_old->is_primary = false; } if (!bo->is_primary) { - qxl_io_create_primary(qdev, 0, bo); + if (!same_shadow) + qxl_io_create_primary(qdev, 0, bo); bo->is_primary = true; } + qxl_draw_dirty_fb(qdev, qfb, bo, 0, 0, &norect, 1, 1); } @@ -681,8 +692,9 @@ static void qxl_cursor_atomic_disable(st static int qxl_plane_prepare_fb(struct drm_plane *plane, struct drm_plane_state *new_state) { + struct qxl_device *qdev = plane->dev->dev_private; struct drm_gem_object *obj; - struct qxl_bo *user_bo; + struct qxl_bo *user_bo, *old_bo = NULL; int ret; if (!new_state->fb) @@ -691,6 +703,32 @@ static int qxl_plane_prepare_fb(struct d obj = to_qxl_framebuffer(new_state->fb)->obj; user_bo = gem_to_qxl_bo(obj); + if (plane->type == DRM_PLANE_TYPE_PRIMARY && + user_bo->is_dumb && !user_bo->shadow) { + if (plane->state->fb) { + obj = to_qxl_framebuffer(plane->state->fb)->obj; + old_bo = gem_to_qxl_bo(obj); + } + if (old_bo && old_bo->shadow && + user_bo->gem_base.size == old_bo->gem_base.size && + plane->state->crtc == new_state->crtc && + plane->state->crtc_w == new_state->crtc_w && + plane->state->crtc_h == new_state->crtc_h && + plane->state->src_x == new_state->src_x && + plane->state->src_y == new_state->src_y && + plane->state->src_w == new_state->src_w && + plane->state->src_h == new_state->src_h && + plane->state->rotation == new_state->rotation && + plane->state->zpos == new_state->zpos) { + drm_gem_object_get(&old_bo->shadow->gem_base); + user_bo->shadow = old_bo->shadow; + } else { + qxl_bo_create(qdev, user_bo->gem_base.size, + true, true, QXL_GEM_DOMAIN_VRAM, NULL, + &user_bo->shadow); + } + } + ret = qxl_bo_pin(user_bo, QXL_GEM_DOMAIN_CPU, NULL); if (ret) return ret; @@ -715,6 +753,11 @@ static void qxl_plane_cleanup_fb(struct obj = to_qxl_framebuffer(old_state->fb)->obj; user_bo = gem_to_qxl_bo(obj); qxl_bo_unpin(user_bo); + + if (user_bo->shadow && !user_bo->is_primary) { + drm_gem_object_put_unlocked(&user_bo->shadow->gem_base); + user_bo->shadow = NULL; + } } static const uint32_t qxl_cursor_plane_formats[] = { --- a/drivers/gpu/drm/qxl/qxl_drv.h +++ b/drivers/gpu/drm/qxl/qxl_drv.h @@ -113,6 +113,8 @@ struct qxl_bo { /* Constant after initialization */ struct drm_gem_object gem_base; bool is_primary; /* is this now a primary surface */ + bool is_dumb; + struct qxl_bo *shadow; bool hw_surf_alloc; struct qxl_surface surf; uint32_t surface_id; --- a/drivers/gpu/drm/qxl/qxl_dumb.c +++ b/drivers/gpu/drm/qxl/qxl_dumb.c @@ -63,6 +63,7 @@ int qxl_mode_dumb_create(struct drm_file &handle); if (r) return r; + qobj->is_dumb = true; args->pitch = pitch; args->handle = handle; return 0; Patches currently in stable-queue which might be from kraxel(a)redhat.com are queue-4.14/drm-qxl-reapply-cursor-after-resetting-primary.patch queue-4.14/qxl-alloc-use-shadow-for-dumb-buffers.patch

7 years, 4 months

1
0
0 0

Patch "mvpp2: fix multicast address filter" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mvpp2: fix multicast address filter to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mvpp2-fix-multicast-address-filter.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 7ac8ff95f48cbfa609a060fd6a1e361dd62feeb3 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka <mpatocka(a)redhat.com> Date: Sun, 11 Feb 2018 18:10:28 -0500 Subject: mvpp2: fix multicast address filter From: Mikulas Patocka <mpatocka(a)redhat.com> commit 7ac8ff95f48cbfa609a060fd6a1e361dd62feeb3 upstream. IPv6 doesn't work on the MacchiatoBIN board. It is caused by broken multicast address filter in the mvpp2 driver. The driver loads doesn't load any multicast entries if "allmulti" is not set. This condition should be reversed. The condition !netdev_mc_empty(dev) is useless (because netdev_for_each_mc_addr is nop if the list is empty). This patch also fixes a possible overflow of the multicast list - if mvpp2_prs_mac_da_accept fails, we set the allmulti flag and retry. Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> Cc: stable(a)vger.kernel.org Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/marvell/mvpp2.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -6888,6 +6888,7 @@ static void mvpp2_set_rx_mode(struct net int id = port->id; bool allmulti = dev->flags & IFF_ALLMULTI; +retry: mvpp2_prs_mac_promisc_set(priv, id, dev->flags & IFF_PROMISC); mvpp2_prs_mac_multi_set(priv, id, MVPP2_PE_MAC_MC_ALL, allmulti); mvpp2_prs_mac_multi_set(priv, id, MVPP2_PE_MAC_MC_IP6, allmulti); @@ -6895,9 +6896,13 @@ static void mvpp2_set_rx_mode(struct net /* Remove all port->id's mcast enries */ mvpp2_prs_mcast_del_all(priv, id); - if (allmulti && !netdev_mc_empty(dev)) { - netdev_for_each_mc_addr(ha, dev) - mvpp2_prs_mac_da_accept(priv, id, ha->addr, true); + if (!allmulti) { + netdev_for_each_mc_addr(ha, dev) { + if (mvpp2_prs_mac_da_accept(priv, id, ha->addr, true)) { + allmulti = true; + goto retry; + } + } } } Patches currently in stable-queue which might be from mpatocka(a)redhat.com are queue-4.14/mvpp2-fix-multicast-address-filter.patch queue-4.14/blk-wbt-account-flush-requests-correctly.patch

7 years, 4 months

1
0
0 0

Patch "mtd: nand: vf610: set correct ooblayout" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mtd: nand: vf610: set correct ooblayout to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mtd-nand-vf610-set-correct-ooblayout.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ea56fb282368ea08c2a313af6b55cb597aec4db1 Mon Sep 17 00:00:00 2001 From: Stefan Agner <stefan(a)agner.ch> Date: Fri, 9 Feb 2018 13:21:42 +0100 Subject: mtd: nand: vf610: set correct ooblayout From: Stefan Agner <stefan(a)agner.ch> commit ea56fb282368ea08c2a313af6b55cb597aec4db1 upstream. With commit 3cf32d180227 ("mtd: nand: vf610: switch to mtd_ooblayout_ops") the driver started to use the NAND cores default large page ooblayout. However, shortly after commit 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout") changed the default layout to the old hamming layout, which is not what vf610_nfc is using. Specify the default large page layout explicitly. Fixes: 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout") Cc: <stable(a)vger.kernel.org> # v4.12+ Signed-off-by: Stefan Agner <stefan(a)agner.ch> Signed-off-by: Boris Brezillon <boris.brezillon(a)bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/nand/vf610_nfc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) --- a/drivers/mtd/nand/vf610_nfc.c +++ b/drivers/mtd/nand/vf610_nfc.c @@ -752,10 +752,8 @@ static int vf610_nfc_probe(struct platfo if (mtd->oobsize > 64) mtd->oobsize = 64; - /* - * mtd->ecclayout is not specified here because we're using the - * default large page ECC layout defined in NAND core. - */ + /* Use default large page ECC layout defined in NAND core */ + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); if (chip->ecc.strength == 32) { nfc->ecc_mode = ECC_60_BYTE; chip->ecc.bytes = 60; Patches currently in stable-queue which might be from stefan(a)agner.ch are queue-4.14/mtd-nand-vf610-set-correct-ooblayout.patch

7 years, 4 months

1
0
0 0

Patch "iscsi-target: make sure to wake up sleeping login worker" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iscsi-target: make sure to wake up sleeping login worker to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iscsi-target-make-sure-to-wake-up-sleeping-login-worker.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1c130ae00b769a2e2df41bad3d6051ee8234b636 Mon Sep 17 00:00:00 2001 From: Florian Westphal <fw(a)strlen.de> Date: Fri, 19 Jan 2018 14:36:29 +0100 Subject: iscsi-target: make sure to wake up sleeping login worker From: Florian Westphal <fw(a)strlen.de> commit 1c130ae00b769a2e2df41bad3d6051ee8234b636 upstream. Mike Christie reports: Starting in 4.14 iscsi logins will fail around 50% of the time. Problem appears to be that iscsi_target_sk_data_ready() callback may return without doing anything in case it finds the login work queue is still blocked in sock_recvmsg(). Nicholas Bellinger says: It would indicate users providing their own ->sk_data_ready() callback must be responsible for waking up a kthread context blocked on sock_recvmsg(..., MSG_WAITALL), when a second ->sk_data_ready() is received before the first sock_recvmsg(..., MSG_WAITALL) completes. So, do this and invoke the original data_ready() callback -- in case of tcp sockets this takes care of waking the thread. Disclaimer: I do not understand why this problem did not show up before tcp prequeue removal. (Drop WARN_ON usage - nab) Reported-by: Mike Christie <mchristi(a)redhat.com> Bisected-by: Mike Christie <mchristi(a)redhat.com> Tested-by: Mike Christie <mchristi(a)redhat.com> Diagnosed-by: Nicholas Bellinger <nab(a)linux-iscsi.org> Fixes: e7942d0633c4 ("tcp: remove prequeue support") Signed-off-by: Florian Westphal <fw(a)strlen.de> Cc: stable(a)vger.kernel.org # 4.14+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/target/iscsi/iscsi_target_nego.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/target/iscsi/iscsi_target_nego.c +++ b/drivers/target/iscsi/iscsi_target_nego.c @@ -432,6 +432,9 @@ static void iscsi_target_sk_data_ready(s if (test_and_set_bit(LOGIN_FLAGS_READ_ACTIVE, &conn->login_flags)) { write_unlock_bh(&sk->sk_callback_lock); pr_debug("Got LOGIN_FLAGS_READ_ACTIVE=1, conn: %p >>>>\n", conn); + if (iscsi_target_sk_data_ready == conn->orig_data_ready) + return; + conn->orig_data_ready(sk); return; } Patches currently in stable-queue which might be from fw(a)strlen.de are queue-4.14/iscsi-target-make-sure-to-wake-up-sleeping-login-worker.patch

7 years, 4 months

1
0
0 0

Patch "drm/qxl: reapply cursor after resetting primary" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/qxl: reapply cursor after resetting primary to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-qxl-reapply-cursor-after-resetting-primary.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 9428088c90b6f7d5edd2a1b0d742c75339b36f6e Mon Sep 17 00:00:00 2001 From: Ray Strode <rstrode(a)redhat.com> Date: Mon, 27 Nov 2017 16:50:10 -0500 Subject: drm/qxl: reapply cursor after resetting primary From: Ray Strode <rstrode(a)redhat.com> commit 9428088c90b6f7d5edd2a1b0d742c75339b36f6e upstream. QXL associates mouse state with its primary plane. Destroying a primary plane and putting a new one in place has the side effect of destroying the cursor as well. This commit changes the driver to reapply the cursor any time a new primary is created. It achieves this by keeping a reference to the cursor bo on the qxl_crtc struct. This fix is very similar to commit 4532b241a4b7 ("drm/qxl: reapply cursor after SetCrtc calls") which got implicitly reverted as part of implementing the atomic modeset feature. Cc: Gerd Hoffmann <kraxel(a)redhat.com> Cc: Dave Airlie <airlied(a)redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1512097 Fixes: 1277eed5fecb ("drm: qxl: Atomic phase 1: convert cursor to universal plane") Cc: stable(a)vger.kernel.org Signed-off-by: Ray Strode <rstrode(a)redhat.com> Signed-off-by: Dave Airlie <airlied(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/qxl/qxl_display.c | 59 ++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/qxl/qxl_drv.h | 2 + 2 files changed, 61 insertions(+) --- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -289,6 +289,7 @@ static void qxl_crtc_destroy(struct drm_ { struct qxl_crtc *qxl_crtc = to_qxl_crtc(crtc); + qxl_bo_unref(&qxl_crtc->cursor_bo); drm_crtc_cleanup(crtc); kfree(qxl_crtc); } @@ -495,6 +496,53 @@ static int qxl_primary_atomic_check(stru return 0; } +static int qxl_primary_apply_cursor(struct drm_plane *plane) +{ + struct drm_device *dev = plane->dev; + struct qxl_device *qdev = dev->dev_private; + struct drm_framebuffer *fb = plane->state->fb; + struct qxl_crtc *qcrtc = to_qxl_crtc(plane->state->crtc); + struct qxl_cursor_cmd *cmd; + struct qxl_release *release; + int ret = 0; + + if (!qcrtc->cursor_bo) + return 0; + + ret = qxl_alloc_release_reserved(qdev, sizeof(*cmd), + QXL_RELEASE_CURSOR_CMD, + &release, NULL); + if (ret) + return ret; + + ret = qxl_release_list_add(release, qcrtc->cursor_bo); + if (ret) + goto out_free_release; + + ret = qxl_release_reserve_list(release, false); + if (ret) + goto out_free_release; + + cmd = (struct qxl_cursor_cmd *)qxl_release_map(qdev, release); + cmd->type = QXL_CURSOR_SET; + cmd->u.set.position.x = plane->state->crtc_x + fb->hot_x; + cmd->u.set.position.y = plane->state->crtc_y + fb->hot_y; + + cmd->u.set.shape = qxl_bo_physical_address(qdev, qcrtc->cursor_bo, 0); + + cmd->u.set.visible = 1; + qxl_release_unmap(qdev, release, &cmd->release_info); + + qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false); + qxl_release_fence_buffer_objects(release); + + return ret; + +out_free_release: + qxl_release_free(qdev, release); + return ret; +} + static void qxl_primary_atomic_update(struct drm_plane *plane, struct drm_plane_state *old_state) { @@ -510,6 +558,7 @@ static void qxl_primary_atomic_update(st .x2 = qfb->base.width, .y2 = qfb->base.height }; + int ret; bool same_shadow = false; if (old_state->fb) { @@ -531,6 +580,11 @@ static void qxl_primary_atomic_update(st if (!same_shadow) qxl_io_destroy_primary(qdev); bo_old->is_primary = false; + + ret = qxl_primary_apply_cursor(plane); + if (ret) + DRM_ERROR( + "could not set cursor after creating primary"); } if (!bo->is_primary) { @@ -571,6 +625,7 @@ static void qxl_cursor_atomic_update(str struct drm_device *dev = plane->dev; struct qxl_device *qdev = dev->dev_private; struct drm_framebuffer *fb = plane->state->fb; + struct qxl_crtc *qcrtc = to_qxl_crtc(plane->state->crtc); struct qxl_release *release; struct qxl_cursor_cmd *cmd; struct qxl_cursor *cursor; @@ -628,6 +683,10 @@ static void qxl_cursor_atomic_update(str cmd->u.set.shape = qxl_bo_physical_address(qdev, cursor_bo, 0); cmd->type = QXL_CURSOR_SET; + + qxl_bo_unref(&qcrtc->cursor_bo); + qcrtc->cursor_bo = cursor_bo; + cursor_bo = NULL; } else { ret = qxl_release_reserve_list(release, true); --- a/drivers/gpu/drm/qxl/qxl_drv.h +++ b/drivers/gpu/drm/qxl/qxl_drv.h @@ -135,6 +135,8 @@ struct qxl_bo_list { struct qxl_crtc { struct drm_crtc base; int index; + + struct qxl_bo *cursor_bo; }; struct qxl_output { Patches currently in stable-queue which might be from rstrode(a)redhat.com are queue-4.14/drm-qxl-unref-cursor-bo-when-finished-with-it.patch queue-4.14/drm-qxl-reapply-cursor-after-resetting-primary.patch

7 years, 4 months

1
0
0 0

Patch "dm: correctly handle chained bios in dec_pending()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dm: correctly handle chained bios in dec_pending() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dm-correctly-handle-chained-bios-in-dec_pending.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8dd601fa8317243be887458c49f6c29c2f3d719f Mon Sep 17 00:00:00 2001 From: NeilBrown <neilb(a)suse.com> Date: Thu, 15 Feb 2018 20:00:15 +1100 Subject: dm: correctly handle chained bios in dec_pending() From: NeilBrown <neilb(a)suse.com> commit 8dd601fa8317243be887458c49f6c29c2f3d719f upstream. dec_pending() is given an error status (possibly 0) to be recorded against a bio. It can be called several times on the one 'struct dm_io', and it is careful to only assign a non-zero error to io->status. However when it then assigned io->status to bio->bi_status, it is not careful and could overwrite a genuine error status with 0. This can happen when chained bios are in use. If a bio is chained beneath the bio that this dm_io is handling, the child bio might complete and set bio->bi_status before the dm_io completes. This has been possible since chained bios were introduced in 3.14, and has become a lot easier to trigger with commit 18a25da84354 ("dm: ensure bio submission follows a depth-first tree walk") as that commit caused dm to start using chained bios itself. A particular failure mode is that if a bio spans an 'error' target and a working target, the 'error' fragment will complete instantly and set the ->bi_status, and the other fragment will normally complete a little later, and will clear ->bi_status. The fix is simply to only assign io_error to bio->bi_status when io_error is not zero. Reported-and-tested-by: Milan Broz <gmazyland(a)gmail.com> Cc: stable(a)vger.kernel.org (v3.14+) Signed-off-by: NeilBrown <neilb(a)suse.com> Signed-off-by: Mike Snitzer <snitzer(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/dm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -815,7 +815,8 @@ static void dec_pending(struct dm_io *io queue_io(md, bio); } else { /* done with normal IO or empty flush */ - bio->bi_status = io_error; + if (io_error) + bio->bi_status = io_error; bio_endio(bio); } } Patches currently in stable-queue which might be from neilb(a)suse.com are queue-4.14/dm-correctly-handle-chained-bios-in-dec_pending.patch

7 years, 4 months

1
0
0 0

Patch "Btrfs: fix use-after-free on root->orphan_block_rsv" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Btrfs: fix use-after-free on root->orphan_block_rsv to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: btrfs-fix-use-after-free-on-root-orphan_block_rsv.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1a932ef4e47984dee227834667b5ff5a334e4805 Mon Sep 17 00:00:00 2001 From: Liu Bo <bo.li.liu(a)oracle.com> Date: Thu, 25 Jan 2018 11:02:54 -0700 Subject: Btrfs: fix use-after-free on root->orphan_block_rsv From: Liu Bo <bo.li.liu(a)oracle.com> commit 1a932ef4e47984dee227834667b5ff5a334e4805 upstream. I got these from running generic/475, WARNING: CPU: 0 PID: 26384 at fs/btrfs/inode.c:3326 btrfs_orphan_commit_root+0x1ac/0x2b0 [btrfs] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: btrfs_block_rsv_release+0x1c/0x70 [btrfs] Call Trace: btrfs_orphan_release_metadata+0x9f/0x200 [btrfs] btrfs_orphan_del+0x10d/0x170 [btrfs] btrfs_setattr+0x500/0x640 [btrfs] notify_change+0x7ae/0x870 do_truncate+0xca/0x130 vfs_truncate+0x2ee/0x3d0 do_sys_truncate+0xaf/0xf0 SyS_truncate+0xe/0x10 entry_SYSCALL_64_fastpath+0x1f/0x96 The race is between btrfs_orphan_commit_root and btrfs_orphan_del, t1 t2 btrfs_orphan_commit_root btrfs_orphan_del spin_lock check (&root->orphan_inodes) root->orphan_block_rsv = NULL; spin_unlock atomic_dec(&root->orphan_inodes); access root->orphan_block_rsv Accessing root->orphan_block_rsv must be done before decreasing root->orphan_inodes. cc: <stable(a)vger.kernel.org> v3.12+ Fixes: 703c88e03524 ("Btrfs: fix tracking of orphan inode count") Signed-off-by: Liu Bo <bo.li.liu(a)oracle.com> Reviewed-by: Josef Bacik <jbacik(a)fb.com> Signed-off-by: David Sterba <dsterba(a)suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/btrfs/inode.c | 34 +++++++++++++++++++++------------- 1 file changed, 21 insertions(+), 13 deletions(-) --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3371,6 +3371,11 @@ int btrfs_orphan_add(struct btrfs_trans_ ret = btrfs_orphan_reserve_metadata(trans, inode); ASSERT(!ret); if (ret) { + /* + * dec doesn't need spin_lock as ->orphan_block_rsv + * would be released only if ->orphan_inodes is + * zero. + */ atomic_dec(&root->orphan_inodes); clear_bit(BTRFS_INODE_ORPHAN_META_RESERVED, &inode->runtime_flags); @@ -3385,12 +3390,17 @@ int btrfs_orphan_add(struct btrfs_trans_ if (insert >= 1) { ret = btrfs_insert_orphan_item(trans, root, btrfs_ino(inode)); if (ret) { - atomic_dec(&root->orphan_inodes); if (reserve) { clear_bit(BTRFS_INODE_ORPHAN_META_RESERVED, &inode->runtime_flags); btrfs_orphan_release_metadata(inode); } + /* + * btrfs_orphan_commit_root may race with us and set + * ->orphan_block_rsv to zero, in order to avoid that, + * decrease ->orphan_inodes after everything is done. + */ + atomic_dec(&root->orphan_inodes); if (ret != -EEXIST) { clear_bit(BTRFS_INODE_HAS_ORPHAN_ITEM, &inode->runtime_flags); @@ -3422,28 +3432,26 @@ static int btrfs_orphan_del(struct btrfs { struct btrfs_root *root = inode->root; int delete_item = 0; - int release_rsv = 0; int ret = 0; - spin_lock(&root->orphan_lock); if (test_and_clear_bit(BTRFS_INODE_HAS_ORPHAN_ITEM, &inode->runtime_flags)) delete_item = 1; + if (delete_item && trans) + ret = btrfs_del_orphan_item(trans, root, btrfs_ino(inode)); + if (test_and_clear_bit(BTRFS_INODE_ORPHAN_META_RESERVED, &inode->runtime_flags)) - release_rsv = 1; - spin_unlock(&root->orphan_lock); + btrfs_orphan_release_metadata(inode); - if (delete_item) { + /* + * btrfs_orphan_commit_root may race with us and set ->orphan_block_rsv + * to zero, in order to avoid that, decrease ->orphan_inodes after + * everything is done. + */ + if (delete_item) atomic_dec(&root->orphan_inodes); - if (trans) - ret = btrfs_del_orphan_item(trans, root, - btrfs_ino(inode)); - } - - if (release_rsv) - btrfs_orphan_release_metadata(inode); return ret; } Patches currently in stable-queue which might be from bo.li.liu(a)oracle.com are queue-4.14/btrfs-fix-btrfs_evict_inode-to-handle-abnormal-inodes-correctly.patch queue-4.14/btrfs-fix-crash-due-to-not-cleaning-up-tree-log-block-s-dirty-bits.patch queue-4.14/btrfs-fix-use-after-free-on-root-orphan_block_rsv.patch queue-4.14/btrfs-fix-extent-state-leak-from-tree-log.patch queue-4.14/btrfs-fix-unexpected-eexist-when-creating-new-inode.patch queue-4.14/btrfs-fix-deadlock-in-run_delalloc_nocow.patch

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror