- Linux-stable-mirror - lists.linaro.org

Patch "net: phy: Tell caller result of phy_change()" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: phy: Tell caller result of phy_change() to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-phy-tell-caller-result-of-phy_change.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Mar 28 18:37:51 CEST 2018 From: Brad Mouring <brad.mouring(a)ni.com> Date: Thu, 8 Mar 2018 16:23:03 -0600 Subject: net: phy: Tell caller result of phy_change() From: Brad Mouring <brad.mouring(a)ni.com> [ Upstream commit a2c054a896b8ac794ddcfc7c92e2dc7ec4ed4ed5 ] In 664fcf123a30e (net: phy: Threaded interrupts allow some simplification) the phy_interrupt system was changed to use a traditional threaded interrupt scheme instead of a workqueue approach. With this change, the phy status check moved into phy_change, which did not report back to the caller whether or not the interrupt was handled. This means that, in the case of a shared phy interrupt, only the first phydev's interrupt registers are checked (since phy_interrupt() would always return IRQ_HANDLED). This leads to interrupt storms when it is a secondary device that's actually the interrupt source. Signed-off-by: Brad Mouring <brad.mouring(a)ni.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/phy/phy.c | 173 ++++++++++++++++++++++++-------------------------- include/linux/phy.h | 1 2 files changed, 86 insertions(+), 88 deletions(-) --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -615,6 +615,91 @@ static void phy_error(struct phy_device } /** + * phy_disable_interrupts - Disable the PHY interrupts from the PHY side + * @phydev: target phy_device struct + */ +static int phy_disable_interrupts(struct phy_device *phydev) +{ + int err; + + /* Disable PHY interrupts */ + err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); + if (err) + goto phy_err; + + /* Clear the interrupt */ + err = phy_clear_interrupt(phydev); + if (err) + goto phy_err; + + return 0; + +phy_err: + phy_error(phydev); + + return err; +} + +/** + * phy_change - Called by the phy_interrupt to handle PHY changes + * @phydev: phy_device struct that interrupted + */ +static irqreturn_t phy_change(struct phy_device *phydev) +{ + if (phy_interrupt_is_valid(phydev)) { + if (phydev->drv->did_interrupt && + !phydev->drv->did_interrupt(phydev)) + goto ignore; + + if (phy_disable_interrupts(phydev)) + goto phy_err; + } + + mutex_lock(&phydev->lock); + if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) + phydev->state = PHY_CHANGELINK; + mutex_unlock(&phydev->lock); + + if (phy_interrupt_is_valid(phydev)) { + atomic_dec(&phydev->irq_disable); + enable_irq(phydev->irq); + + /* Reenable interrupts */ + if (PHY_HALTED != phydev->state && + phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED)) + goto irq_enable_err; + } + + /* reschedule state queue work to run as soon as possible */ + phy_trigger_machine(phydev, true); + return IRQ_HANDLED; + +ignore: + atomic_dec(&phydev->irq_disable); + enable_irq(phydev->irq); + return IRQ_NONE; + +irq_enable_err: + disable_irq(phydev->irq); + atomic_inc(&phydev->irq_disable); +phy_err: + phy_error(phydev); + return IRQ_NONE; +} + +/** + * phy_change_work - Scheduled by the phy_mac_interrupt to handle PHY changes + * @work: work_struct that describes the work to be done + */ +void phy_change_work(struct work_struct *work) +{ + struct phy_device *phydev = + container_of(work, struct phy_device, phy_queue); + + phy_change(phydev); +} + +/** * phy_interrupt - PHY interrupt handler * @irq: interrupt line * @phy_dat: phy_device pointer @@ -632,9 +717,7 @@ static irqreturn_t phy_interrupt(int irq disable_irq_nosync(irq); atomic_inc(&phydev->irq_disable); - phy_change(phydev); - - return IRQ_HANDLED; + return phy_change(phydev); } /** @@ -652,32 +735,6 @@ static int phy_enable_interrupts(struct } /** - * phy_disable_interrupts - Disable the PHY interrupts from the PHY side - * @phydev: target phy_device struct - */ -static int phy_disable_interrupts(struct phy_device *phydev) -{ - int err; - - /* Disable PHY interrupts */ - err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); - if (err) - goto phy_err; - - /* Clear the interrupt */ - err = phy_clear_interrupt(phydev); - if (err) - goto phy_err; - - return 0; - -phy_err: - phy_error(phydev); - - return err; -} - -/** * phy_start_interrupts - request and enable interrupts for a PHY device * @phydev: target phy_device struct * @@ -728,64 +785,6 @@ int phy_stop_interrupts(struct phy_devic EXPORT_SYMBOL(phy_stop_interrupts); /** - * phy_change - Called by the phy_interrupt to handle PHY changes - * @phydev: phy_device struct that interrupted - */ -void phy_change(struct phy_device *phydev) -{ - if (phy_interrupt_is_valid(phydev)) { - if (phydev->drv->did_interrupt && - !phydev->drv->did_interrupt(phydev)) - goto ignore; - - if (phy_disable_interrupts(phydev)) - goto phy_err; - } - - mutex_lock(&phydev->lock); - if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) - phydev->state = PHY_CHANGELINK; - mutex_unlock(&phydev->lock); - - if (phy_interrupt_is_valid(phydev)) { - atomic_dec(&phydev->irq_disable); - enable_irq(phydev->irq); - - /* Reenable interrupts */ - if (PHY_HALTED != phydev->state && - phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED)) - goto irq_enable_err; - } - - /* reschedule state queue work to run as soon as possible */ - phy_trigger_machine(phydev, true); - return; - -ignore: - atomic_dec(&phydev->irq_disable); - enable_irq(phydev->irq); - return; - -irq_enable_err: - disable_irq(phydev->irq); - atomic_inc(&phydev->irq_disable); -phy_err: - phy_error(phydev); -} - -/** - * phy_change_work - Scheduled by the phy_mac_interrupt to handle PHY changes - * @work: work_struct that describes the work to be done - */ -void phy_change_work(struct work_struct *work) -{ - struct phy_device *phydev = - container_of(work, struct phy_device, phy_queue); - - phy_change(phydev); -} - -/** * phy_stop - Bring down the PHY link, and stop checking the status * @phydev: target phy_device struct */ --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -897,7 +897,6 @@ int phy_driver_register(struct phy_drive int phy_drivers_register(struct phy_driver *new_driver, int n, struct module *owner); void phy_state_machine(struct work_struct *work); -void phy_change(struct phy_device *phydev); void phy_change_work(struct work_struct *work); void phy_mac_interrupt(struct phy_device *phydev, int new_link); void phy_start_machine(struct phy_device *phydev); Patches currently in stable-queue which might be from brad.mouring(a)ni.com are queue-4.15/net-phy-tell-caller-result-of-phy_change.patch

7 years, 7 months

1
0
0 0

Patch "net: phy: relax error checking when creating sysfs link netdev->phydev" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: phy: relax error checking when creating sysfs link netdev->phydev to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-phy-relax-error-checking-when-creating-sysfs-link-netdev-phydev.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Mar 28 18:37:51 CEST 2018 From: Grygorii Strashko <grygorii.strashko(a)ti.com> Date: Fri, 16 Mar 2018 17:08:35 -0500 Subject: net: phy: relax error checking when creating sysfs link netdev->phydev From: Grygorii Strashko <grygorii.strashko(a)ti.com> [ Upstream commit 4414b3ed74be0e205e04e12cd83542a727d88255 ] Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per one netdevice, as result such drivers will produce warning during system boot and fail to connect second phy to netdevice when PHYLIB framework will try to create sysfs link netdev->phydev for second PHY in phy_attach_direct(), because sysfs link with the same name has been created already for the first PHY. As result, second CPSW external port will became unusable. Fix it by relaxing error checking when PHYLIB framework is creating sysfs link netdev->phydev in phy_attach_direct(), suppressing warning by using sysfs_create_link_nowarn() and adding error message instead. After this change links (phy->netdev and netdev->phy) creation failure is not fatal any more and system can continue working, which fixes TI CPSW issue. Cc: Florian Fainelli <f.fainelli(a)gmail.com> Cc: Andrew Lunn <andrew(a)lunn.ch> Fixes: a3995460491d ("net: phy: Relax error checking on sysfs_create_link()") Signed-off-by: Grygorii Strashko <grygorii.strashko(a)ti.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/phy/phy_device.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -999,10 +999,17 @@ int phy_attach_direct(struct net_device err = sysfs_create_link(&phydev->mdio.dev.kobj, &dev->dev.kobj, "attached_dev"); if (!err) { - err = sysfs_create_link(&dev->dev.kobj, &phydev->mdio.dev.kobj, - "phydev"); - if (err) - goto error; + err = sysfs_create_link_nowarn(&dev->dev.kobj, + &phydev->mdio.dev.kobj, + "phydev"); + if (err) { + dev_err(&dev->dev, "could not add device link to %s err %d\n", + kobject_name(&phydev->mdio.dev.kobj), + err); + /* non-fatal - some net drivers can use one netdevice + * with more then one phy + */ + } phydev->sysfs_links = true; } Patches currently in stable-queue which might be from grygorii.strashko(a)ti.com are queue-4.15/sysfs-symlink-export-sysfs_create_link_nowarn.patch queue-4.15/net-ethernet-ti-cpsw-add-check-for-in-band-mode-setting-with-rgmii-phy-interface.patch queue-4.15/net-phy-relax-error-checking-when-creating-sysfs-link-netdev-phydev.patch

7 years, 7 months

1
0
0 0

Patch "net: Only honor ifindex in IP_PKTINFO if non-0" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: Only honor ifindex in IP_PKTINFO if non-0 to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-only-honor-ifindex-in-ip_pktinfo-if-non-0.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Mar 28 18:37:51 CEST 2018 From: David Ahern <dsahern(a)gmail.com> Date: Fri, 16 Feb 2018 11:03:03 -0800 Subject: net: Only honor ifindex in IP_PKTINFO if non-0 From: David Ahern <dsahern(a)gmail.com> [ Upstream commit 2cbb4ea7de167b02ffa63e9cdfdb07a7e7094615 ] Only allow ifindex from IP_PKTINFO to override SO_BINDTODEVICE settings if the index is actually set in the message. Signed-off-by: David Ahern <dsahern(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/ip_sockglue.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -258,7 +258,8 @@ int ip_cmsg_send(struct sock *sk, struct src_info = (struct in6_pktinfo *)CMSG_DATA(cmsg); if (!ipv6_addr_v4mapped(&src_info->ipi6_addr)) return -EINVAL; - ipc->oif = src_info->ipi6_ifindex; + if (src_info->ipi6_ifindex) + ipc->oif = src_info->ipi6_ifindex; ipc->addr = src_info->ipi6_addr.s6_addr32[3]; continue; } @@ -288,7 +289,8 @@ int ip_cmsg_send(struct sock *sk, struct if (cmsg->cmsg_len != CMSG_LEN(sizeof(struct in_pktinfo))) return -EINVAL; info = (struct in_pktinfo *)CMSG_DATA(cmsg); - ipc->oif = info->ipi_ifindex; + if (info->ipi_ifindex) + ipc->oif = info->ipi_ifindex; ipc->addr = info->ipi_spec_dst.s_addr; break; } Patches currently in stable-queue which might be from dsahern(a)gmail.com are queue-4.15/net-only-honor-ifindex-in-ip_pktinfo-if-non-0.patch queue-4.15/ipv6-reflect-mtu-changes-on-pmtu-of-exceptions-for-mtu-less-routes.patch

7 years, 7 months

1
0
0 0

Patch "net/iucv: Free memory obtained by kzalloc" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/iucv: Free memory obtained by kzalloc to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-iucv-free-memory-obtained-by-kzalloc.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Mar 28 18:37:51 CEST 2018 From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Date: Tue, 13 Mar 2018 16:50:06 +0100 Subject: net/iucv: Free memory obtained by kzalloc From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> [ Upstream commit fa6a91e9b907231d2e38ea5ed89c537b3525df3d ] Free memory by calling put_device(), if afiucv_iucv_init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Reviewed-by: Cornelia Huck <cohuck(a)redhat.com> Signed-off-by: Ursula Braun <ursula.braun(a)de.ibm.com> Signed-off-by: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/iucv/af_iucv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -2433,9 +2433,11 @@ static int afiucv_iucv_init(void) af_iucv_dev->driver = &af_iucv_driver; err = device_register(af_iucv_dev); if (err) - goto out_driver; + goto out_iucv_dev; return 0; +out_iucv_dev: + put_device(af_iucv_dev); out_driver: driver_unregister(&af_iucv_driver); out_iucv: Patches currently in stable-queue which might be from arvind.yadav.cs(a)gmail.com are queue-4.15/net-iucv-free-memory-obtained-by-kzalloc.patch

7 years, 7 months

1
0
0 0

Patch "net: ipv6: keep sk status consistent after datagram connect failure" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: ipv6: keep sk status consistent after datagram connect failure to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-ipv6-keep-sk-status-consistent-after-datagram-connect-failure.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Mar 28 18:37:51 CEST 2018 From: Paolo Abeni <pabeni(a)redhat.com> Date: Mon, 12 Mar 2018 14:54:23 +0100 Subject: net: ipv6: keep sk status consistent after datagram connect failure From: Paolo Abeni <pabeni(a)redhat.com> [ Upstream commit 2f987a76a97773beafbc615b9c4d8fe79129a7f4 ] On unsuccesful ip6_datagram_connect(), if the failure is caused by ip6_datagram_dst_update(), the sk peer information are cleared, but the sk->sk_state is preserved. If the socket was already in an established status, the overall sk status is inconsistent and fouls later checks in datagram code. Fix this saving the old peer information and restoring them in case of failure. This also aligns ipv6 datagram connect() behavior with ipv4. v1 -> v2: - added missing Fixes tag Fixes: 85cb73ff9b74 ("net: ipv6: reset daddr and dport in sk if connect() fails") Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/datagram.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -146,10 +146,12 @@ int __ip6_datagram_connect(struct sock * struct sockaddr_in6 *usin = (struct sockaddr_in6 *) uaddr; struct inet_sock *inet = inet_sk(sk); struct ipv6_pinfo *np = inet6_sk(sk); - struct in6_addr *daddr; + struct in6_addr *daddr, old_daddr; + __be32 fl6_flowlabel = 0; + __be32 old_fl6_flowlabel; + __be32 old_dport; int addr_type; int err; - __be32 fl6_flowlabel = 0; if (usin->sin6_family == AF_INET) { if (__ipv6_only_sock(sk)) @@ -239,9 +241,13 @@ ipv4_connected: } } + /* save the current peer information before updating it */ + old_daddr = sk->sk_v6_daddr; + old_fl6_flowlabel = np->flow_label; + old_dport = inet->inet_dport; + sk->sk_v6_daddr = *daddr; np->flow_label = fl6_flowlabel; - inet->inet_dport = usin->sin6_port; /* @@ -251,11 +257,12 @@ ipv4_connected: err = ip6_datagram_dst_update(sk, true); if (err) { - /* Reset daddr and dport so that udp_v6_early_demux() - * fails to find this socket + /* Restore the socket peer info, to keep it consistent with + * the old socket state */ - memset(&sk->sk_v6_daddr, 0, sizeof(sk->sk_v6_daddr)); - inet->inet_dport = 0; + sk->sk_v6_daddr = old_daddr; + np->flow_label = old_fl6_flowlabel; + inet->inet_dport = old_dport; goto out; } Patches currently in stable-queue which might be from pabeni(a)redhat.com are queue-4.15/ipv6-old_dport-should-be-a-__be16-in-__ip6_datagram_connect.patch queue-4.15/net-ipv6-keep-sk-status-consistent-after-datagram-connect-failure.patch

7 years, 7 months

1
0
0 0

Patch "net: Fix hlist corruptions in inet_evict_bucket()" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: Fix hlist corruptions in inet_evict_bucket() to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-fix-hlist-corruptions-in-inet_evict_bucket.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Mar 28 18:37:51 CEST 2018 From: Kirill Tkhai <ktkhai(a)virtuozzo.com> Date: Tue, 6 Mar 2018 18:46:39 +0300 Subject: net: Fix hlist corruptions in inet_evict_bucket() From: Kirill Tkhai <ktkhai(a)virtuozzo.com> [ Upstream commit a560002437d3646dafccecb1bf32d1685112ddda ] inet_evict_bucket() iterates global list, and several tasks may call it in parallel. All of them hash the same fq->list_evictor to different lists, which leads to list corruption. This patch makes fq be hashed to expired list only if this has not been made yet by another task. Since inet_frag_alloc() allocates fq using kmem_cache_zalloc(), we may rely on list_evictor is initially unhashed. The problem seems to exist before async pernet_operations, as there was possible to have exit method to be executed in parallel with inet_frags::frags_work, so I add two Fixes tags. This also may go to stable. Fixes: d1fe19444d82 "inet: frag: don't re-use chainlist for evictor" Fixes: f84c6821aa54 "net: Convert pernet_subsys, registered from inet_init()" Signed-off-by: Kirill Tkhai <ktkhai(a)virtuozzo.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/inet_fragment.c | 3 +++ 1 file changed, 3 insertions(+) --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -119,6 +119,9 @@ out: static bool inet_fragq_should_evict(const struct inet_frag_queue *q) { + if (!hlist_unhashed(&q->list_evictor)) + return false; + return q->net->low_thresh == 0 || frag_mem_limit(q->net) >= q->net->low_thresh; } Patches currently in stable-queue which might be from ktkhai(a)virtuozzo.com are queue-4.15/net-fix-hlist-corruptions-in-inet_evict_bucket.patch

7 years, 7 months

1
0
0 0

Patch "net: fec: Fix unbalanced PM runtime calls" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: fec: Fix unbalanced PM runtime calls to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-fec-fix-unbalanced-pm-runtime-calls.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Mar 28 18:37:51 CEST 2018 From: Florian Fainelli <f.fainelli(a)gmail.com> Date: Sun, 18 Mar 2018 12:49:51 -0700 Subject: net: fec: Fix unbalanced PM runtime calls From: Florian Fainelli <f.fainelli(a)gmail.com> [ Upstream commit a069215cf5985f3aa1bba550264907d6bd05c5f7 ] When unbinding/removing the driver, we will run into the following warnings: [ 259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator [ 259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable! [ 259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00 [ 259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1 [ 259.696239] libphy: fec_enet_mii_bus: probed Avoid these warnings by balancing the runtime PM calls during fec_drv_remove(). Signed-off-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/freescale/fec_main.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3578,6 +3578,8 @@ fec_drv_remove(struct platform_device *p fec_enet_mii_remove(fep); if (fep->reg_phy) regulator_disable(fep->reg_phy); + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); if (of_phy_is_fixed_link(np)) of_phy_deregister_fixed_link(np); of_node_put(fep->phy_node); Patches currently in stable-queue which might be from f.fainelli(a)gmail.com are queue-4.15/net-dsa-fix-dsa_is_user_port-test-inversion.patch queue-4.15/net-systemport-rewrite-__bcm_sysport_tx_reclaim.patch queue-4.15/sysfs-symlink-export-sysfs_create_link_nowarn.patch queue-4.15/net-fec-fix-unbalanced-pm-runtime-calls.patch queue-4.15/net-phy-relax-error-checking-when-creating-sysfs-link-netdev-phydev.patch

7 years, 7 months

1
0
0 0

Patch "net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-ethernet-ti-cpsw-add-check-for-in-band-mode-setting-with-rgmii-phy-interface.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Mar 28 18:37:51 CEST 2018 From: "SZ Lin (林上智)" <sz.lin(a)moxa.com> Date: Fri, 16 Mar 2018 00:56:01 +0800 Subject: net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface From: "SZ Lin (林上智)" <sz.lin(a)moxa.com> [ Upstream commit f9db50691db4a7d860fce985f080bb3fc23a7ede ] According to AM335x TRM[1] 14.3.6.2, AM437x TRM[2] 15.3.6.2 and DRA7 TRM[3] 24.11.4.8.7.3.3, in-band mode in EXT_EN(bit18) register is only available when PHY is configured in RGMII mode with 10Mbps speed. It will cause some networking issues without RGMII mode, such as carrier sense errors and low throughput. TI also mentioned this issue in their forum[4]. This patch adds the check mechanism for PHY interface with RGMII interface type, the in-band mode can only be set in RGMII mode with 10Mbps speed. References: [1]: https://www.ti.com/lit/ug/spruh73p/spruh73p.pdf [2]: http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf [3]: http://www.ti.com/lit/ug/spruic2b/spruic2b.pdf [4]: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/640765/2392155 Suggested-by: Holsety Chen (陳憲輝) <Holsety.Chen(a)moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin(a)moxa.com> Signed-off-by: Schuyler Patton <spatton(a)ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko(a)ti.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/ti/cpsw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -996,7 +996,8 @@ static void _cpsw_adjust_link(struct cps /* set speed_in input in case RMII mode is used in 100Mbps */ if (phy->speed == 100) mac_control |= BIT(15); - else if (phy->speed == 10) + /* in band mode only works in 10Mbps RGMII mode */ + else if ((phy->speed == 10) && phy_interface_is_rgmii(phy)) mac_control |= BIT(18); /* In Band mode */ if (priv->rx_pause) Patches currently in stable-queue which might be from sz.lin(a)moxa.com are queue-4.15/net-ethernet-ti-cpsw-add-check-for-in-band-mode-setting-with-rgmii-phy-interface.patch

7 years, 7 months

1
0
0 0

Patch "net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-ethernet-arc-fix-a-potential-memory-leak-if-an-optional-regulator-is-deferred.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Mar 28 18:37:51 CEST 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Sun, 18 Mar 2018 23:59:36 +0100 Subject: net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 00777fac28ba3e126b9e63e789a613e8bd2cab25 ] If the optional regulator is deferred, we must release some resources. They will be re-allocated when the probe function will be called again. Fixes: 6eacf31139bf ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/arc/emac_rockchip.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/arc/emac_rockchip.c +++ b/drivers/net/ethernet/arc/emac_rockchip.c @@ -169,8 +169,10 @@ static int emac_rockchip_probe(struct pl /* Optional regulator for PHY */ priv->regulator = devm_regulator_get_optional(dev, "phy"); if (IS_ERR(priv->regulator)) { - if (PTR_ERR(priv->regulator) == -EPROBE_DEFER) - return -EPROBE_DEFER; + if (PTR_ERR(priv->regulator) == -EPROBE_DEFER) { + err = -EPROBE_DEFER; + goto out_clk_disable; + } dev_err(dev, "no regulator found\n"); priv->regulator = NULL; } Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.15/net-ethernet-arc-fix-a-potential-memory-leak-if-an-optional-regulator-is-deferred.patch

7 years, 7 months

1
0
0 0

Patch "net: dsa: Fix dsa_is_user_port() test inversion" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: dsa: Fix dsa_is_user_port() test inversion to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-dsa-fix-dsa_is_user_port-test-inversion.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Mar 28 18:37:51 CEST 2018 From: Florian Fainelli <f.fainelli(a)gmail.com> Date: Mon, 12 Mar 2018 16:00:40 -0700 Subject: net: dsa: Fix dsa_is_user_port() test inversion From: Florian Fainelli <f.fainelli(a)gmail.com> [ Upstream commit 5a9f8df68ee6927f21dd3f2c75c16feb8b53a9e8 ] During the conversion to dsa_is_user_port(), a condition ended up being reversed, which would prevent the creation of any user port when using the legacy binding and/or platform data, fix that. Fixes: 4a5b85ffe2a0 ("net: dsa: use dsa_is_user_port everywhere") Signed-off-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/dsa/legacy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/net/dsa/legacy.c +++ b/net/dsa/legacy.c @@ -194,7 +194,7 @@ static int dsa_switch_setup_one(struct d ds->ports[i].dn = cd->port_dn[i]; ds->ports[i].cpu_dp = dst->cpu_dp; - if (dsa_is_user_port(ds, i)) + if (!dsa_is_user_port(ds, i)) continue; ret = dsa_slave_create(&ds->ports[i]); Patches currently in stable-queue which might be from f.fainelli(a)gmail.com are queue-4.15/net-dsa-fix-dsa_is_user_port-test-inversion.patch queue-4.15/net-systemport-rewrite-__bcm_sysport_tx_reclaim.patch queue-4.15/sysfs-symlink-export-sysfs_create_link_nowarn.patch queue-4.15/net-fec-fix-unbalanced-pm-runtime-calls.patch queue-4.15/net-phy-relax-error-checking-when-creating-sysfs-link-netdev-phydev.patch

7 years, 7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror