- Linux-stable-mirror - lists.linaro.org

Patch "serial: 8250: omap: Disable DMA for console UART" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: 8250: omap: Disable DMA for console UART to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-8250-omap-disable-dma-for-console-uart.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Vignesh R <vigneshr(a)ti.com> Date: Sat, 22 Apr 2017 18:37:19 +0530 Subject: serial: 8250: omap: Disable DMA for console UART From: Vignesh R <vigneshr(a)ti.com> [ Upstream commit 84b40e3b57eef1417479c00490dd4c9f6e5ffdbc ] Kernel always writes log messages to console via serial8250_console_write()->serial8250_console_putchar() which directly accesses UART_TX register _without_ using DMA. But, if other processes like systemd using same UART port, then these writes are handled by a different code flow using 8250_omap driver where there is provision to use DMA. It seems that it is possible that both DMA and CPU might simultaneously put data to UART FIFO and lead to potential loss of data due to FIFO overflow and weird data corruption. This happens when both kernel console and userspace tries to write simultaneously to the same UART port. Therefore, disable DMA on kernel console port to avoid potential race between CPU and DMA. Signed-off-by: Vignesh R <vigneshr(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/8250/8250_omap.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -613,6 +613,10 @@ static int omap_8250_startup(struct uart up->lsr_saved_flags = 0; up->msr_saved_flags = 0; + /* Disable DMA for console UART */ + if (uart_console(port)) + up->dma = NULL; + if (up->dma) { ret = serial8250_request_dma(up); if (ret) { Patches currently in stable-queue which might be from vigneshr(a)ti.com are queue-4.9/serial-8250-omap-disable-dma-for-console-uart.patch

7 years, 8 months

1
0
0 0

Patch "selinux: do not check open permission on sockets" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selinux: do not check open permission on sockets to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selinux-do-not-check-open-permission-on-sockets.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Stephen Smalley <sds(a)tycho.nsa.gov> Date: Fri, 12 May 2017 12:41:24 -0400 Subject: selinux: do not check open permission on sockets From: Stephen Smalley <sds(a)tycho.nsa.gov> [ Upstream commit ccb544781d34afdb73a9a73ae53035d824d193bf ] open permission is currently only defined for files in the kernel (COMMON_FILE_PERMS rather than COMMON_FILE_SOCK_PERMS). Construction of an artificial test case that tries to open a socket via /proc/pid/fd will generate a recvfrom avc denial because recvfrom and open happen to map to the same permission bit in socket vs file classes. open of a socket via /proc/pid/fd is not supported by the kernel regardless and will ultimately return ENXIO. But we hit the permission check first and can thus produce these odd/misleading denials. Omit the open check when operating on a socket. Signed-off-by: Stephen Smalley <sds(a)tycho.nsa.gov> Signed-off-by: Paul Moore <paul(a)paul-moore.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- security/selinux/hooks.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2033,8 +2033,9 @@ static inline u32 file_to_av(struct file static inline u32 open_file_to_av(struct file *file) { u32 av = file_to_av(file); + struct inode *inode = file_inode(file); - if (selinux_policycap_openperm) + if (selinux_policycap_openperm && inode->i_sb->s_magic != SOCKFS_MAGIC) av |= FILE__OPEN; return av; @@ -3031,6 +3032,7 @@ static int selinux_inode_permission(stru static int selinux_inode_setattr(struct dentry *dentry, struct iattr *iattr) { const struct cred *cred = current_cred(); + struct inode *inode = d_backing_inode(dentry); unsigned int ia_valid = iattr->ia_valid; __u32 av = FILE__WRITE; @@ -3046,8 +3048,10 @@ static int selinux_inode_setattr(struct ATTR_ATIME_SET | ATTR_MTIME_SET | ATTR_TIMES_SET)) return dentry_has_perm(cred, dentry, FILE__SETATTR); - if (selinux_policycap_openperm && (ia_valid & ATTR_SIZE) - && !(ia_valid & ATTR_FILE)) + if (selinux_policycap_openperm && + inode->i_sb->s_magic != SOCKFS_MAGIC && + (ia_valid & ATTR_SIZE) && + !(ia_valid & ATTR_FILE)) av |= FILE__OPEN; return dentry_has_perm(cred, dentry, av); Patches currently in stable-queue which might be from sds(a)tycho.nsa.gov are queue-4.9/selinux-do-not-check-open-permission-on-sockets.patch

7 years, 8 months

1
0
0 0

Patch "selftests/powerpc: Fix TM resched DSCR test with some compilers" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selftests/powerpc: Fix TM resched DSCR test with some compilers to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selftests-powerpc-fix-tm-resched-dscr-test-with-some-compilers.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Michael Ellerman <mpe(a)ellerman.id.au> Date: Fri, 19 May 2017 11:29:04 +1000 Subject: selftests/powerpc: Fix TM resched DSCR test with some compilers From: Michael Ellerman <mpe(a)ellerman.id.au> [ Upstream commit fe06fe860250a4f01d0eaf70a2563b1997174a74 ] The tm-resched-dscr test has started failing sometimes, depending on what compiler it's built with, eg: test: tm_resched_dscr Check DSCR TM context switch: tm-resched-dscr: tm-resched-dscr.c:76: test_body: Assertion `rv' failed. !! child died by signal 6 When it fails we see that the compiler doesn't initialise rv to 1 before entering the inline asm block. Although that's counter intuitive, it is allowed because we tell the compiler that the inline asm will write to rv (using "=r"), meaning the original value is irrelevant. Marking it as a read/write parameter would presumably work, but it seems simpler to fix it by setting the initial value of rv in the inline asm. Fixes: 96d016108640 ("powerpc: Correct DSCR during TM context switch") Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Acked-by: Michael Neuling <mikey(a)neuling.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/powerpc/tm/tm-resched-dscr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c +++ b/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c @@ -42,12 +42,12 @@ int test_body(void) printf("Check DSCR TM context switch: "); fflush(stdout); for (;;) { - rv = 1; asm __volatile__ ( /* set a known value into the DSCR */ "ld 3, %[dscr1];" "mtspr %[sprn_dscr], 3;" + "li %[rv], 1;" /* start and suspend a transaction */ "tbegin.;" "beq 1f;" Patches currently in stable-queue which might be from mpe(a)ellerman.id.au are queue-4.9/selftests-powerpc-fix-tm-resched-dscr-test-with-some-compilers.patch queue-4.9/powerpc-modules-if-mprofile-kernel-is-enabled-add-it-to-vermagic.patch queue-4.9/powerpc-mm-fix-virt_addr_valid-etc.-on-64-bit-hash.patch queue-4.9/powerpc-spufs-fix-coredump-of-spu-contexts.patch queue-4.9/cxl-unlock-on-error-in-probe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch queue-4.9/powerpc-don-t-clobber-tcr-when-setting-tcr.patch queue-4.9/powerpc-8xx-fix-mpc8xx_get_irq-return-on-no-irq.patch

7 years, 8 months

1
0
0 0

Patch "sdhci: Advertise 2.0v supply on SDIO host controller" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sdhci: Advertise 2.0v supply on SDIO host controller to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sdhci-advertise-2.0v-supply-on-sdio-host-controller.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Date: Thu, 11 Jan 2018 15:51:58 +0200 Subject: sdhci: Advertise 2.0v supply on SDIO host controller From: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> [ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ] On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO, requires 2.0v, while the host, according to Intel Merrifield TRM, supports 1.8v supply only. The card announces itself as mmc2: new ultra high speed DDR50 SDIO card at address 0001 Introduce a custom OCR mask for SDIO host controller on Intel Merrifield and add a special case to sdhci_set_power_noreg() to override 2.0v supply by enforcing 1.8v power choice. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter(a)intel.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mmc/host/sdhci-pci-core.c | 2 ++ drivers/mmc/host/sdhci.c | 7 +++++++ 2 files changed, 9 insertions(+) --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -492,6 +492,8 @@ static int intel_mrfld_mmc_probe_slot(st slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; break; case INTEL_MRFLD_SDIO: + /* Advertise 2.0v for compatibility with the SDIO card's OCR */ + slot->host->ocr_mask = MMC_VDD_20_21 | MMC_VDD_165_195; slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD; break; --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1404,6 +1404,13 @@ void sdhci_set_power_noreg(struct sdhci_ if (mode != MMC_POWER_OFF) { switch (1 << vdd) { case MMC_VDD_165_195: + /* + * Without a regulator, SDHCI does not support 2.0v + * so we only get here if the driver deliberately + * added the 2.0v range to ocr_avail. Map it to 1.8v + * for the purpose of turning on the power. + */ + case MMC_VDD_20_21: pwr = SDHCI_POWER_180; break; case MMC_VDD_29_30: Patches currently in stable-queue which might be from andriy.shevchenko(a)linux.intel.com are queue-4.9/gpio-crystalcove-do-not-write-regular-gpio-registers-for-virtual-gpios.patch queue-4.9/sdhci-advertise-2.0v-supply-on-sdio-host-controller.patch

7 years, 8 months

1
0
0 0

Patch "selftests: kselftest_harness: Fix compile warning" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selftests: kselftest_harness: Fix compile warning to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selftests-kselftest_harness-fix-compile-warning.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Mickaël Salaün" <mic(a)digikod.net> Date: Sun, 11 Jun 2017 14:32:58 +0200 Subject: selftests: kselftest_harness: Fix compile warning From: "Mickaël Salaün" <mic(a)digikod.net> [ Upstream commit 34a048cc06802556e5f96f325dc32cc2f6a11225 ] Do not confuse the compiler with a semicolon preceding a block. Replace the semicolon with an empty block to avoid a warning: gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o /.../linux/tools/testing/selftests/seccomp/seccomp_bpf In file included from seccomp_bpf.c:40:0: seccomp_bpf.c: In function âchange_syscallâ: ../kselftest_harness.h:558:2: warning: this âforâ clause does not guard... [-Wmisleading-indentation] for (; _metadata->trigger; _metadata->trigger = __bail(_assert)) ^ ../kselftest_harness.h:574:14: note: in expansion of macro âOPTIONAL_HANDLERâ } while (0); OPTIONAL_HANDLER(_assert) ^~~~~~~~~~~~~~~~ ../kselftest_harness.h:440:2: note: in expansion of macro â__EXPECTâ __EXPECT(expected, seen, ==, 0) ^~~~~~~~ seccomp_bpf.c:1313:2: note: in expansion of macro âEXPECT_EQâ EXPECT_EQ(0, ret); ^~~~~~~~~ seccomp_bpf.c:1317:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the âforâ { ^ Signed-off-by: MickaÃ«l SalaÃ¼n <mic(a)digikod.net> Cc: Andy Lutomirski <luto(a)amacapital.net> Cc: Kees Cook <keescook(a)chromium.org> Cc: Shuah Khan <shuahkh(a)osg.samsung.com> Cc: Will Drewry <wad(a)chromium.org> Acked-by: Kees Cook <keescook(a)chromium.org> Signed-off-by: Shuah Khan <shuahkh(a)osg.samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/seccomp/seccomp_bpf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -1318,7 +1318,7 @@ void change_syscall(struct __test_metada iov.iov_len = sizeof(regs); ret = ptrace(PTRACE_GETREGSET, tracee, NT_PRSTATUS, &iov); #endif - EXPECT_EQ(0, ret); + EXPECT_EQ(0, ret) {} #if defined(__x86_64__) || defined(__i386__) || defined(__powerpc__) || \ defined(__s390__) || defined(__hppa__) Patches currently in stable-queue which might be from mic(a)digikod.net are queue-4.9/selftests-kselftest_harness-fix-compile-warning.patch

7 years, 8 months

1
0
0 0

Patch "sctp: fix recursive locking warning in sctp_do_peeloff" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sctp: fix recursive locking warning in sctp_do_peeloff to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sctp-fix-recursive-locking-warning-in-sctp_do_peeloff.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Xin Long <lucien.xin(a)gmail.com> Date: Sat, 10 Jun 2017 14:56:56 +0800 Subject: sctp: fix recursive locking warning in sctp_do_peeloff From: Xin Long <lucien.xin(a)gmail.com> [ Upstream commit 6dfe4b97e08ec3d1a593fdaca099f0ef0a3a19e6 ] Dmitry got the following recursive locking report while running syzkaller fuzzer, the Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:52 print_deadlock_bug kernel/locking/lockdep.c:1729 [inline] check_deadlock kernel/locking/lockdep.c:1773 [inline] validate_chain kernel/locking/lockdep.c:2251 [inline] __lock_acquire+0xef2/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 lock_sock_nested+0xcb/0x120 net/core/sock.c:2536 lock_sock include/net/sock.h:1460 [inline] sctp_close+0xcd/0x9d0 net/sctp/socket.c:1497 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432 sock_release+0x8d/0x1e0 net/socket.c:597 __sock_create+0x38b/0x870 net/socket.c:1226 sock_create+0x7f/0xa0 net/socket.c:1237 sctp_do_peeloff+0x1a2/0x440 net/sctp/socket.c:4879 sctp_getsockopt_peeloff net/sctp/socket.c:4914 [inline] sctp_getsockopt+0x111a/0x67e0 net/sctp/socket.c:6628 sock_common_getsockopt+0x95/0xd0 net/core/sock.c:2690 SYSC_getsockopt net/socket.c:1817 [inline] SyS_getsockopt+0x240/0x380 net/socket.c:1799 entry_SYSCALL_64_fastpath+0x1f/0xc2 This warning is caused by the lock held by sctp_getsockopt() is on one socket, while the other lock that sctp_close() is getting later is on the newly created (which failed) socket during peeloff operation. This patch is to avoid this warning by use lock_sock with subclass SINGLE_DEPTH_NESTING as Wang Cong and Marcelo's suggestion. Reported-by: Dmitry Vyukov <dvyukov(a)google.com> Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner(a)gmail.com> Suggested-by: Cong Wang <xiyou.wangcong(a)gmail.com> Signed-off-by: Xin Long <lucien.xin(a)gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/sctp/socket.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1519,7 +1519,7 @@ static void sctp_close(struct sock *sk, pr_debug("%s: sk:%p, timeout:%ld\n", __func__, sk, timeout); - lock_sock(sk); + lock_sock_nested(sk, SINGLE_DEPTH_NESTING); sk->sk_shutdown = SHUTDOWN_MASK; sk->sk_state = SCTP_SS_CLOSING; @@ -1569,7 +1569,7 @@ static void sctp_close(struct sock *sk, * held and that should be grabbed before socket lock. */ spin_lock_bh(&net->sctp.addr_wq_lock); - bh_lock_sock(sk); + bh_lock_sock_nested(sk); /* Hold the sock, since sk_common_release() will put sock_put() * and we have just a little more cleanup. Patches currently in stable-queue which might be from lucien.xin(a)gmail.com are queue-4.9/sctp-fix-recursive-locking-warning-in-sctp_do_peeloff.patch

7 years, 8 months

1
0
0 0

Patch "scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-mpt3sas-proper-handling-of-set-clear-of-ata-command-pending-flag.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Chaitra P B <chaitra.basappa(a)broadcom.com> Date: Wed, 27 Dec 2017 23:09:11 -0800 Subject: scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. From: Chaitra P B <chaitra.basappa(a)broadcom.com> [ Upstream commit f49d4aed1315a7b766d855f1367142e682b0cc87 ] 1. In IO path, setting of "ATA command pending" flag early before device removal, invalid device handle etc., checks causes any new commands to be always returned with SAM_STAT_BUSY and when the driver removes the drive the SML issues SYNC Cache command and that command is always returned with SAM_STAT_BUSY and thus making SYNC Cache command to requeued. 2. If the driver gets an ATA PT command for a SATA drive then the driver set "ATA command pending" flag in device specific data structure not to allow any further commands until the ATA PT command is completed. However, after setting the flag if the driver decides to return the command back to upper layers without actually issuing to the firmware (i.e., returns from qcmd failure return paths) then the corresponding flag is not cleared and this prevents the driver from sending any new commands to the drive. This patch fixes above two issues by setting of "ATA command pending" flag after checking for whether device deleted, invalid device handle, device busy with task management. And by setting "ATA command pending" flag to false in all of the qcmd failure return paths after setting the flag. Signed-off-by: Chaitra P B <chaitra.basappa(a)broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani(a)broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -4065,19 +4065,6 @@ scsih_qcmd(struct Scsi_Host *shost, stru return 0; } - /* - * Bug work around for firmware SATL handling. The loop - * is based on atomic operations and ensures consistency - * since we're lockless at this point - */ - do { - if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { - scmd->result = SAM_STAT_BUSY; - scmd->scsi_done(scmd); - return 0; - } - } while (_scsih_set_satl_pending(scmd, true)); - sas_target_priv_data = sas_device_priv_data->sas_target; /* invalid device handle */ @@ -4103,6 +4090,19 @@ scsih_qcmd(struct Scsi_Host *shost, stru sas_device_priv_data->block) return SCSI_MLQUEUE_DEVICE_BUSY; + /* + * Bug work around for firmware SATL handling. The loop + * is based on atomic operations and ensures consistency + * since we're lockless at this point + */ + do { + if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { + scmd->result = SAM_STAT_BUSY; + scmd->scsi_done(scmd); + return 0; + } + } while (_scsih_set_satl_pending(scmd, true)); + if (scmd->sc_data_direction == DMA_FROM_DEVICE) mpi_control = MPI2_SCSIIO_CONTROL_READ; else if (scmd->sc_data_direction == DMA_TO_DEVICE) @@ -4124,6 +4124,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (!smid) { pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); + _scsih_set_satl_pending(scmd, false); goto out; } mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); @@ -4154,6 +4155,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (mpi_request->DataLength) { if (ioc->build_sg_scmd(ioc, scmd, smid)) { mpt3sas_base_free_smid(ioc, smid); + _scsih_set_satl_pending(scmd, false); goto out; } } else Patches currently in stable-queue which might be from chaitra.basappa(a)broadcom.com are queue-4.9/scsi-mpt3sas-proper-handling-of-set-clear-of-ata-command-pending-flag.patch

7 years, 8 months

1
0
0 0

Patch "scsi: libsas: initialize sas_phy status according to response of DISCOVER" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libsas: initialize sas_phy status according to response of DISCOVER to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: chenxiang <chenxiang66(a)hisilicon.com> Date: Thu, 4 Jan 2018 21:04:33 +0800 Subject: scsi: libsas: initialize sas_phy status according to response of DISCOVER From: chenxiang <chenxiang66(a)hisilicon.com> [ Upstream commit affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ] The status of SAS PHY is in sas_phy->enabled. There is an issue that the status of a remote SAS PHY may be initialized incorrectly: if disable remote SAS PHY through sysfs interface (such as echo 0 > /sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we will find the status of remote SAS PHY which is disabled before is 1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of remote SAS PHY is disabled and the device attached is not found. In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled according to the value of NEGOTIATED LOGICAL LINK RATE field. Signed-off-by: chenxiang <chenxiang66(a)hisilicon.com> Reviewed-by: John Garry <john.garry(a)huawei.com> Signed-off-by: Jason Yan <yanaijie(a)huawei.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libsas/sas_expander.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -282,6 +282,7 @@ static void sas_set_ex_phy(struct domain phy->phy->minimum_linkrate = dr->pmin_linkrate; phy->phy->maximum_linkrate = dr->pmax_linkrate; phy->phy->negotiated_linkrate = phy->linkrate; + phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED); skip: if (new_phy) Patches currently in stable-queue which might be from chenxiang66(a)hisilicon.com are queue-4.9/scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch queue-4.9/scsi-libsas-fix-error-when-getting-phy-events.patch queue-4.9/scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch

7 years, 8 months

1
0
0 0

Patch "scsi: libsas: fix memory leak in sas_smp_get_phy_events()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libsas: fix memory leak in sas_smp_get_phy_events() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Jason Yan <yanaijie(a)huawei.com> Date: Thu, 4 Jan 2018 21:04:31 +0800 Subject: scsi: libsas: fix memory leak in sas_smp_get_phy_events() From: Jason Yan <yanaijie(a)huawei.com> [ Upstream commit 4a491b1ab11ca0556d2fda1ff1301e862a2d44c4 ] We've got a memory leak with the following producer: while true; do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null; done The buffer req is allocated and not freed after we return. Fix it. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie(a)huawei.com> CC: John Garry <john.garry(a)huawei.com> CC: chenqilin <chenqilin2(a)huawei.com> CC: chenxiang <chenxiang66(a)hisilicon.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libsas/sas_expander.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -684,6 +684,7 @@ int sas_smp_get_phy_events(struct sas_ph phy->phy_reset_problem_count = scsi_to_u32(&resp[24]); out: + kfree(req); kfree(resp); return res; Patches currently in stable-queue which might be from yanaijie(a)huawei.com are queue-4.9/scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch queue-4.9/scsi-libsas-fix-error-when-getting-phy-events.patch queue-4.9/scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch

7 years, 8 months

1
0
0 0

Patch "scsi: libiscsi: Allow sd_shutdown on bad transport" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libiscsi: Allow sd_shutdown on bad transport to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libiscsi-allow-sd_shutdown-on-bad-transport.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Rafael David Tinoco <rafael.tinoco(a)canonical.com> Date: Thu, 7 Dec 2017 19:59:13 -0200 Subject: scsi: libiscsi: Allow sd_shutdown on bad transport From: Rafael David Tinoco <rafael.tinoco(a)canonical.com> [ Upstream commit d754941225a7dbc61f6dd2173fa9498049f9a7ee ] If, for any reason, userland shuts down iscsi transport interfaces before proper logouts - like when logging in to LUNs manually, without logging out on server shutdown, or when automated scripts can't umount/logout from logged LUNs - kernel will hang forever on its sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all still existent paths. PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow" #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c This happens because iscsi_eh_cmd_timed_out(), the transport layer timeout helper, would tell the queue timeout function (scsi_times_out) to reset the request timer over and over, until the session state is back to logged in state. Unfortunately, during server shutdown, this might never happen again. Other option would be "not to handle" the issue in the transport layer. That would trigger the error handler logic, which would also need the session state to be logged in again. Best option, for such case, is to tell upper layers that the command was handled during the transport layer error handler helper, marking it as DID_NO_CONNECT, which will allow completion and inform about the problem. After the session was marked as ISCSI_STATE_FAILED, due to the first timeout during the server shutdown phase, all subsequent cmds will fail to be queued, allowing upper logic to fail faster. Signed-off-by: Rafael David Tinoco <rafael.tinoco(a)canonical.com> Reviewed-by: Lee Duncan <lduncan(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libiscsi.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1695,6 +1695,15 @@ int iscsi_queuecommand(struct Scsi_Host */ switch (session->state) { case ISCSI_STATE_FAILED: + /* + * cmds should fail during shutdown, if the session + * state is bad, allowing completion to happen + */ + if (unlikely(system_state != SYSTEM_RUNNING)) { + reason = FAILURE_SESSION_FAILED; + sc->result = DID_NO_CONNECT << 16; + break; + } case ISCSI_STATE_IN_RECOVERY: reason = FAILURE_SESSION_IN_RECOVERY; sc->result = DID_IMM_RETRY << 16; @@ -1980,6 +1989,19 @@ static enum blk_eh_timer_return iscsi_eh if (session->state != ISCSI_STATE_LOGGED_IN) { /* + * During shutdown, if session is prematurely disconnected, + * recovery won't happen and there will be hung cmds. Not + * handling cmds would trigger EH, also bad in this case. + * Instead, handle cmd, allow completion to happen and let + * upper layer to deal with the result. + */ + if (unlikely(system_state != SYSTEM_RUNNING)) { + sc->result = DID_NO_CONNECT << 16; + ISCSI_DBG_EH(session, "sc on shutdown, handled\n"); + rc = BLK_EH_HANDLED; + goto done; + } + /* * We are probably in the middle of iscsi recovery so let * that complete and handle the error. */ @@ -2083,7 +2105,7 @@ done: task->last_timeout = jiffies; spin_unlock(&session->frwd_lock); ISCSI_DBG_EH(session, "return %s\n", rc == BLK_EH_RESET_TIMER ? - "timer reset" : "nh"); + "timer reset" : "shutdown or nh"); return rc; } Patches currently in stable-queue which might be from rafael.tinoco(a)canonical.com are queue-4.9/scsi-libiscsi-allow-sd_shutdown-on-bad-transport.patch

7 years, 8 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror