This is a note to let you know that I've just added the patch titled
cpufreq: Add Loongson machine dependencies
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
cpufreq-add-loongson-machine-dependencies.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Feb 1 14:14:46 CET 2018
From: James Hogan <jhogan(a)kernel.org>
Date: Wed, 15 Nov 2017 21:17:55 +0000
Subject: cpufreq: Add Loongson machine dependencies
From: James Hogan <jhogan(a)kernel.org>
[ Upstream commit 0d307935fefa6389eb726c6362351c162c949101 ]
The MIPS loongson cpufreq drivers don't build unless configured for the
correct machine type, due to dependency on machine specific architecture
headers and symbols in machine specific platform code.
More specifically loongson1-cpufreq.c uses RST_CPU_EN and RST_CPU,
neither of which is defined in asm/mach-loongson32/regs-clk.h unless
CONFIG_LOONGSON1_LS1B=y, and loongson2_cpufreq.c references
loongson2_clockmod_table[], which is only defined in
arch/mips/loongson64/lemote-2f/clock.c, i.e. when
CONFIG_LEMOTE_MACH2F=y.
Add these dependencies to Kconfig to avoid randconfig / allyesconfig
build failures (e.g. when based on BMIPS which also has a cpufreq
driver).
Signed-off-by: James Hogan <jhogan(a)kernel.org>
Acked-by: Viresh Kumar <viresh.kumar(a)linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/cpufreq/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -236,6 +236,7 @@ endif
if MIPS
config LOONGSON2_CPUFREQ
tristate "Loongson2 CPUFreq Driver"
+ depends on LEMOTE_MACH2F
help
This option adds a CPUFreq driver for loongson processors which
support software configurable cpu frequency.
@@ -248,6 +249,7 @@ config LOONGSON2_CPUFREQ
config LOONGSON1_CPUFREQ
tristate "Loongson1 CPUFreq Driver"
+ depends on LOONGSON1_LS1B
help
This option adds a CPUFreq driver for loongson1 processors which
support software configurable cpu frequency.
Patches currently in stable-queue which might be from jhogan(a)kernel.org are
queue-4.4/cpufreq-add-loongson-machine-dependencies.patch
This is a note to let you know that I've just added the patch titled
btrfs: fix deadlock when writing out space cache
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
btrfs-fix-deadlock-when-writing-out-space-cache.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Feb 1 14:14:46 CET 2018
From: Josef Bacik <jbacik(a)fb.com>
Date: Wed, 15 Nov 2017 16:20:52 -0500
Subject: btrfs: fix deadlock when writing out space cache
From: Josef Bacik <jbacik(a)fb.com>
[ Upstream commit b77000ed558daa3bef0899d29bf171b8c9b5e6a8 ]
If we fail to prepare our pages for whatever reason (out of memory in
our case) we need to make sure to drop the block_group->data_rwsem,
otherwise hilarity ensues.
Signed-off-by: Josef Bacik <jbacik(a)fb.com>
Reviewed-by: Omar Sandoval <osandov(a)fb.com>
Reviewed-by: Liu Bo <bo.li.liu(a)oracle.com>
Reviewed-by: David Sterba <dsterba(a)suse.com>
[ add label and use existing unlocking code ]
Signed-off-by: David Sterba <dsterba(a)suse.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
fs/btrfs/free-space-cache.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -1258,7 +1258,7 @@ static int __btrfs_write_out_cache(struc
/* Lock all pages first so we can lock the extent safely. */
ret = io_ctl_prepare_pages(io_ctl, inode, 0);
if (ret)
- goto out;
+ goto out_unlock;
lock_extent_bits(&BTRFS_I(inode)->io_tree, 0, i_size_read(inode) - 1,
0, &cached_state);
@@ -1351,6 +1351,7 @@ out_nospc_locked:
out_nospc:
cleanup_write_cache_enospc(inode, io_ctl, &cached_state, &bitmap_list);
+out_unlock:
if (block_group && (block_group->flags & BTRFS_BLOCK_GROUP_DATA))
up_write(&block_group->data_rwsem);
Patches currently in stable-queue which might be from jbacik(a)fb.com are
queue-4.4/btrfs-fix-deadlock-when-writing-out-space-cache.patch
This is a note to let you know that I've just added the patch titled
bcache: check return value of register_shrinker
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
bcache-check-return-value-of-register_shrinker.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Feb 1 14:14:46 CET 2018
From: Michael Lyle <mlyle(a)lyle.org>
Date: Fri, 24 Nov 2017 15:14:27 -0800
Subject: bcache: check return value of register_shrinker
From: Michael Lyle <mlyle(a)lyle.org>
[ Upstream commit 6c4ca1e36cdc1a0a7a84797804b87920ccbebf51 ]
register_shrinker is now __must_check, so check it to kill a warning.
Caller of bch_btree_cache_alloc in super.c appropriately checks return
value so this is fully plumbed through.
This V2 fixes checkpatch warnings and improves the commit description,
as I was too hasty getting the previous version out.
Signed-off-by: Michael Lyle <mlyle(a)lyle.org>
Reviewed-by: Vojtech Pavlik <vojtech(a)suse.com>
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/md/bcache/btree.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -808,7 +808,10 @@ int bch_btree_cache_alloc(struct cache_s
c->shrink.scan_objects = bch_mca_scan;
c->shrink.seeks = 4;
c->shrink.batch = c->btree_pages * 2;
- register_shrinker(&c->shrink);
+
+ if (register_shrinker(&c->shrink))
+ pr_warn("bcache: %s: could not register shrinker",
+ __func__);
return 0;
}
Patches currently in stable-queue which might be from mlyle(a)lyle.org are
queue-4.4/bcache-check-return-value-of-register_shrinker.patch
This is a note to let you know that I've just added the patch titled
ACPI / bus: Leave modalias empty for devices which are not present
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
acpi-bus-leave-modalias-empty-for-devices-which-are-not-present.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Feb 1 14:14:46 CET 2018
From: Hans de Goede <hdegoede(a)redhat.com>
Date: Sun, 15 Oct 2017 21:24:49 +0200
Subject: ACPI / bus: Leave modalias empty for devices which are not present
From: Hans de Goede <hdegoede(a)redhat.com>
[ Upstream commit 10809bb976648ac58194a629e3d7af99e7400297 ]
Most Bay and Cherry Trail devices use a generic DSDT with all possible
peripheral devices present in the DSDT, with their _STA returning 0x00 or
0x0f based on AML variables which describe what is actually present on
the board.
Since ACPI device objects with a 0x00 status (not present) still get an
entry under /sys/bus/acpi/devices, and those entry had an acpi:PNPID
modalias, userspace would end up loading modules for non present hardware.
This commit fixes this by leaving the modalias empty for non present
devices. This results in 10 modules less being loaded with a generic
distro kernel config on my Cherry Trail test-device (a GPD pocket).
Signed-off-by: Hans de Goede <hdegoede(a)redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/acpi/device_sysfs.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/acpi/device_sysfs.c
+++ b/drivers/acpi/device_sysfs.c
@@ -146,6 +146,10 @@ static int create_pnp_modalias(struct ac
int count;
struct acpi_hardware_id *id;
+ /* Avoid unnecessarily loading modules for non present devices. */
+ if (!acpi_device_is_present(acpi_dev))
+ return 0;
+
/*
* Since we skip ACPI_DT_NAMESPACE_HID from the modalias below, 0 should
* be returned if ACPI_DT_NAMESPACE_HID is the only ACPI/PNP ID in the
Patches currently in stable-queue which might be from hdegoede(a)redhat.com are
queue-4.4/acpi-bus-leave-modalias-empty-for-devices-which-are-not-present.patch
This is a note to let you know that I've just added the patch titled
xfs: ubsan fixes
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
xfs-ubsan-fixes.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Feb 1 14:00:34 CET 2018
From: "Darrick J. Wong" <darrick.wong(a)oracle.com>
Date: Mon, 27 Nov 2017 09:50:17 -0800
Subject: xfs: ubsan fixes
From: "Darrick J. Wong" <darrick.wong(a)oracle.com>
[ Upstream commit 22a6c83777ac7c17d6c63891beeeac24cf5da450 ]
Fix some complaints from the UBSAN about signed integer addition overflows.
Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com>
Reviewed-by: Brian Foster <bfoster(a)redhat.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
fs/xfs/xfs_aops.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -391,7 +391,7 @@ xfs_map_blocks(
(ip->i_df.if_flags & XFS_IFEXTENTS));
ASSERT(offset <= mp->m_super->s_maxbytes);
- if (offset + count > mp->m_super->s_maxbytes)
+ if ((xfs_ufsize_t)offset + count > mp->m_super->s_maxbytes)
count = mp->m_super->s_maxbytes - offset;
end_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)offset + count);
offset_fsb = XFS_B_TO_FSBT(mp, offset);
@@ -1295,7 +1295,7 @@ xfs_map_trim_size(
if (mapping_size > size)
mapping_size = size;
if (offset < i_size_read(inode) &&
- offset + mapping_size >= i_size_read(inode)) {
+ (xfs_ufsize_t)offset + mapping_size >= i_size_read(inode)) {
/* limit mapping to block that spans EOF */
mapping_size = roundup_64(i_size_read(inode) - offset,
i_blocksize(inode));
@@ -1347,7 +1347,7 @@ __xfs_get_blocks(
lockmode = xfs_ilock_data_map_shared(ip);
ASSERT(offset <= mp->m_super->s_maxbytes);
- if (offset + size > mp->m_super->s_maxbytes)
+ if ((xfs_ufsize_t)offset + size > mp->m_super->s_maxbytes)
size = mp->m_super->s_maxbytes - offset;
end_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)offset + size);
offset_fsb = XFS_B_TO_FSBT(mp, offset);
Patches currently in stable-queue which might be from darrick.wong(a)oracle.com are
queue-4.9/xfs-always-free-inline-data-before-resetting-inode-fork-during-ifree.patch
queue-4.9/xfs-ubsan-fixes.patch
queue-4.9/xfs-fortify-xfs_alloc_buftarg-error-handling.patch
queue-4.9/xfs-properly-retry-failed-dquot-items-in-case-of-error-during-buffer-writeback.patch
This is a note to let you know that I've just added the patch titled
xfs: Properly retry failed dquot items in case of error during buffer writeback
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
xfs-properly-retry-failed-dquot-items-in-case-of-error-during-buffer-writeback.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Feb 1 14:00:34 CET 2018
From: Carlos Maiolino <cmaiolino(a)redhat.com>
Date: Tue, 28 Nov 2017 08:54:10 -0800
Subject: xfs: Properly retry failed dquot items in case of error during buffer writeback
From: Carlos Maiolino <cmaiolino(a)redhat.com>
[ Upstream commit 373b0589dc8d58bc09c9a28d03611ae4fb216057 ]
Once the inode item writeback errors is already fixed, it's time to fix the same
problem in dquot code.
Although there were no reports of users hitting this bug in dquot code (at least
none I've seen), the bug is there and I was already planning to fix it when the
correct approach to fix the inodes part was decided.
This patch aims to fix the same problem in dquot code, regarding failed buffers
being unable to be resubmitted once they are flush locked.
Tested with the recently test-case sent to fstests list by Hou Tao.
Reviewed-by: Brian Foster <bfoster(a)redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino(a)redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong(a)oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
fs/xfs/xfs_dquot.c | 14 +++++++++++---
fs/xfs/xfs_dquot_item.c | 40 ++++++++++++++++++++++++++++++++++++++--
2 files changed, 49 insertions(+), 5 deletions(-)
--- a/fs/xfs/xfs_dquot.c
+++ b/fs/xfs/xfs_dquot.c
@@ -1004,14 +1004,22 @@ xfs_qm_dqflush_done(
* holding the lock before removing the dquot from the AIL.
*/
if ((lip->li_flags & XFS_LI_IN_AIL) &&
- lip->li_lsn == qip->qli_flush_lsn) {
+ ((lip->li_lsn == qip->qli_flush_lsn) ||
+ (lip->li_flags & XFS_LI_FAILED))) {
/* xfs_trans_ail_delete() drops the AIL lock. */
spin_lock(&ailp->xa_lock);
- if (lip->li_lsn == qip->qli_flush_lsn)
+ if (lip->li_lsn == qip->qli_flush_lsn) {
xfs_trans_ail_delete(ailp, lip, SHUTDOWN_CORRUPT_INCORE);
- else
+ } else {
+ /*
+ * Clear the failed state since we are about to drop the
+ * flush lock
+ */
+ if (lip->li_flags & XFS_LI_FAILED)
+ xfs_clear_li_failed(lip);
spin_unlock(&ailp->xa_lock);
+ }
}
/*
--- a/fs/xfs/xfs_dquot_item.c
+++ b/fs/xfs/xfs_dquot_item.c
@@ -137,6 +137,26 @@ xfs_qm_dqunpin_wait(
wait_event(dqp->q_pinwait, (atomic_read(&dqp->q_pincount) == 0));
}
+/*
+ * Callback used to mark a buffer with XFS_LI_FAILED when items in the buffer
+ * have been failed during writeback
+ *
+ * this informs the AIL that the dquot is already flush locked on the next push,
+ * and acquires a hold on the buffer to ensure that it isn't reclaimed before
+ * dirty data makes it to disk.
+ */
+STATIC void
+xfs_dquot_item_error(
+ struct xfs_log_item *lip,
+ struct xfs_buf *bp)
+{
+ struct xfs_dquot *dqp;
+
+ dqp = DQUOT_ITEM(lip)->qli_dquot;
+ ASSERT(!completion_done(&dqp->q_flush));
+ xfs_set_li_failed(lip, bp);
+}
+
STATIC uint
xfs_qm_dquot_logitem_push(
struct xfs_log_item *lip,
@@ -144,13 +164,28 @@ xfs_qm_dquot_logitem_push(
__acquires(&lip->li_ailp->xa_lock)
{
struct xfs_dquot *dqp = DQUOT_ITEM(lip)->qli_dquot;
- struct xfs_buf *bp = NULL;
+ struct xfs_buf *bp = lip->li_buf;
uint rval = XFS_ITEM_SUCCESS;
int error;
if (atomic_read(&dqp->q_pincount) > 0)
return XFS_ITEM_PINNED;
+ /*
+ * The buffer containing this item failed to be written back
+ * previously. Resubmit the buffer for IO
+ */
+ if (lip->li_flags & XFS_LI_FAILED) {
+ if (!xfs_buf_trylock(bp))
+ return XFS_ITEM_LOCKED;
+
+ if (!xfs_buf_resubmit_failed_buffers(bp, lip, buffer_list))
+ rval = XFS_ITEM_FLUSHING;
+
+ xfs_buf_unlock(bp);
+ return rval;
+ }
+
if (!xfs_dqlock_nowait(dqp))
return XFS_ITEM_LOCKED;
@@ -242,7 +277,8 @@ static const struct xfs_item_ops xfs_dqu
.iop_unlock = xfs_qm_dquot_logitem_unlock,
.iop_committed = xfs_qm_dquot_logitem_committed,
.iop_push = xfs_qm_dquot_logitem_push,
- .iop_committing = xfs_qm_dquot_logitem_committing
+ .iop_committing = xfs_qm_dquot_logitem_committing,
+ .iop_error = xfs_dquot_item_error
};
/*
Patches currently in stable-queue which might be from cmaiolino(a)redhat.com are
queue-4.9/xfs-properly-retry-failed-dquot-items-in-case-of-error-during-buffer-writeback.patch
This is a note to let you know that I've just added the patch titled
xfs: fortify xfs_alloc_buftarg error handling
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
xfs-fortify-xfs_alloc_buftarg-error-handling.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Feb 1 14:00:34 CET 2018
From: Michal Hocko <mhocko(a)suse.com>
Date: Thu, 23 Nov 2017 17:13:40 +0100
Subject: xfs: fortify xfs_alloc_buftarg error handling
From: Michal Hocko <mhocko(a)suse.com>
[ Upstream commit d210a9874b8f6166579408131cb74495caff1958 ]
percpu_counter_init failure path doesn't clean up &btp->bt_lru list.
Call list_lru_destroy in that error path. Similarly register_shrinker
error path is not handled.
While it is unlikely to trigger these error path, it is not impossible
especially the later might fail with large NUMAs. Let's handle the
failure to make the code more robust.
Noticed-by: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko(a)suse.com>
Acked-by: Dave Chinner <dchinner(a)redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong(a)oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
fs/xfs/xfs_buf.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -1785,22 +1785,27 @@ xfs_alloc_buftarg(
btp->bt_bdi = blk_get_backing_dev_info(bdev);
if (xfs_setsize_buftarg_early(btp, bdev))
- goto error;
+ goto error_free;
if (list_lru_init(&btp->bt_lru))
- goto error;
+ goto error_free;
if (percpu_counter_init(&btp->bt_io_count, 0, GFP_KERNEL))
- goto error;
+ goto error_lru;
btp->bt_shrinker.count_objects = xfs_buftarg_shrink_count;
btp->bt_shrinker.scan_objects = xfs_buftarg_shrink_scan;
btp->bt_shrinker.seeks = DEFAULT_SEEKS;
btp->bt_shrinker.flags = SHRINKER_NUMA_AWARE;
- register_shrinker(&btp->bt_shrinker);
+ if (register_shrinker(&btp->bt_shrinker))
+ goto error_pcpu;
return btp;
-error:
+error_pcpu:
+ percpu_counter_destroy(&btp->bt_io_count);
+error_lru:
+ list_lru_destroy(&btp->bt_lru);
+error_free:
kmem_free(btp);
return NULL;
}
Patches currently in stable-queue which might be from mhocko(a)suse.com are
queue-4.9/quota-check-for-register_shrinker-failure.patch
queue-4.9/xfs-fortify-xfs_alloc_buftarg-error-handling.patch
This is a note to let you know that I've just added the patch titled
xfs: always free inline data before resetting inode fork during ifree
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
xfs-always-free-inline-data-before-resetting-inode-fork-during-ifree.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Feb 1 14:00:34 CET 2018
From: "Darrick J. Wong" <darrick.wong(a)oracle.com>
Date: Wed, 22 Nov 2017 12:21:07 -0800
Subject: xfs: always free inline data before resetting inode fork during ifree
From: "Darrick J. Wong" <darrick.wong(a)oracle.com>
[ Upstream commit 98c4f78dcdd8cec112d1cbc5e9a792ee6e5ab7a6 ]
In xfs_ifree, we reset the data/attr forks to extents format without
bothering to free any inline data buffer that might still be around
after all the blocks have been truncated off the file. Prior to commit
43518812d2 ("xfs: remove support for inlining data/extents into the
inode fork") nobody noticed because the leftover inline data after
truncation was small enough to fit inside the inline buffer inside the
fork itself.
However, now that we've removed the inline buffer, we /always/ have to
free the inline data buffer or else we leak them like crazy. This test
was found by turning on kmemleak for generic/001 or generic/388.
Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com>
Reviewed-by: Christoph Hellwig <hch(a)lst.de>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
fs/xfs/xfs_inode.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2430,6 +2430,24 @@ retry:
}
/*
+ * Free any local-format buffers sitting around before we reset to
+ * extents format.
+ */
+static inline void
+xfs_ifree_local_data(
+ struct xfs_inode *ip,
+ int whichfork)
+{
+ struct xfs_ifork *ifp;
+
+ if (XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_LOCAL)
+ return;
+
+ ifp = XFS_IFORK_PTR(ip, whichfork);
+ xfs_idata_realloc(ip, -ifp->if_bytes, whichfork);
+}
+
+/*
* This is called to return an inode to the inode free list.
* The inode should already be truncated to 0 length and have
* no pages associated with it. This routine also assumes that
@@ -2466,6 +2484,9 @@ xfs_ifree(
if (error)
return error;
+ xfs_ifree_local_data(ip, XFS_DATA_FORK);
+ xfs_ifree_local_data(ip, XFS_ATTR_FORK);
+
VFS_I(ip)->i_mode = 0; /* mark incore inode as free */
ip->i_d.di_flags = 0;
ip->i_d.di_dmevmask = 0;
Patches currently in stable-queue which might be from darrick.wong(a)oracle.com are
queue-4.9/xfs-always-free-inline-data-before-resetting-inode-fork-during-ifree.patch
queue-4.9/xfs-ubsan-fixes.patch
queue-4.9/xfs-fortify-xfs_alloc_buftarg-error-handling.patch
queue-4.9/xfs-properly-retry-failed-dquot-items-in-case-of-error-during-buffer-writeback.patch
This is a note to let you know that I've just added the patch titled
xen-netfront: remove warning when unloading module
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
xen-netfront-remove-warning-when-unloading-module.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Feb 1 14:00:34 CET 2018
From: Eduardo Otubo <otubo(a)redhat.com>
Date: Thu, 23 Nov 2017 15:18:35 +0100
Subject: xen-netfront: remove warning when unloading module
From: Eduardo Otubo <otubo(a)redhat.com>
[ Upstream commit 5b5971df3bc2775107ddad164018a8a8db633b81 ]
v2:
* Replace busy wait with wait_event()/wake_up_all()
* Cannot garantee that at the time xennet_remove is called, the
xen_netback state will not be XenbusStateClosed, so added a
condition for that
* There's a small chance for the xen_netback state is
XenbusStateUnknown by the time the xen_netfront switches to Closed,
so added a condition for that.
When unloading module xen_netfront from guest, dmesg would output
warning messages like below:
[ 105.236836] xen:grant_table: WARNING: g.e. 0x903 still in use!
[ 105.236839] deferring g.e. 0x903 (pfn 0x35805)
This problem relies on netfront and netback being out of sync. By the time
netfront revokes the g.e.'s netback didn't have enough time to free all of
them, hence displaying the warnings on dmesg.
The trick here is to make netfront to wait until netback frees all the g.e.'s
and only then continue to cleanup for the module removal, and this is done by
manipulating both device states.
Signed-off-by: Eduardo Otubo <otubo(a)redhat.com>
Acked-by: Juergen Gross <jgross(a)suse.com>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/net/xen-netfront.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -86,6 +86,8 @@ struct netfront_cb {
/* IRQ name is queue name with "-tx" or "-rx" appended */
#define IRQ_NAME_SIZE (QUEUE_NAME_SIZE + 3)
+static DECLARE_WAIT_QUEUE_HEAD(module_unload_q);
+
struct netfront_stats {
u64 packets;
u64 bytes;
@@ -2051,10 +2053,12 @@ static void netback_changed(struct xenbu
break;
case XenbusStateClosed:
+ wake_up_all(&module_unload_q);
if (dev->state == XenbusStateClosed)
break;
/* Missed the backend's CLOSING state -- fallthrough */
case XenbusStateClosing:
+ wake_up_all(&module_unload_q);
xenbus_frontend_closed(dev);
break;
}
@@ -2160,6 +2164,20 @@ static int xennet_remove(struct xenbus_d
dev_dbg(&dev->dev, "%s\n", dev->nodename);
+ if (xenbus_read_driver_state(dev->otherend) != XenbusStateClosed) {
+ xenbus_switch_state(dev, XenbusStateClosing);
+ wait_event(module_unload_q,
+ xenbus_read_driver_state(dev->otherend) ==
+ XenbusStateClosing);
+
+ xenbus_switch_state(dev, XenbusStateClosed);
+ wait_event(module_unload_q,
+ xenbus_read_driver_state(dev->otherend) ==
+ XenbusStateClosed ||
+ xenbus_read_driver_state(dev->otherend) ==
+ XenbusStateUnknown);
+ }
+
xennet_disconnect_backend(info);
unregister_netdev(info->netdev);
Patches currently in stable-queue which might be from otubo(a)redhat.com are
queue-4.9/xen-netfront-remove-warning-when-unloading-module.patch
This is a note to let you know that I've just added the patch titled
usb: gadget: don't dereference g until after it has been null checked
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-gadget-don-t-dereference-g-until-after-it-has-been-null-checked.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From foo@baz Thu Feb 1 14:00:34 CET 2018
From: Colin Ian King <colin.king(a)canonical.com>
Date: Tue, 14 Nov 2017 16:18:28 +0000
Subject: usb: gadget: don't dereference g until after it has been null checked
From: Colin Ian King <colin.king(a)canonical.com>
[ Upstream commit b2fc059fa549fe6881d4c1f8d698b0f50bcd16ec ]
Avoid dereferencing pointer g until after g has been sanity null checked;
move the assignment of cdev much later when it is required into a more
local scope.
Detected by CoverityScan, CID#1222135 ("Dereference before null check")
Fixes: b785ea7ce662 ("usb: gadget: composite: fix ep->maxburst initialization")
Signed-off-by: Colin Ian King <colin.king(a)canonical.com>
Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/gadget/composite.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -150,7 +150,6 @@ int config_ep_by_speed(struct usb_gadget
struct usb_function *f,
struct usb_ep *_ep)
{
- struct usb_composite_dev *cdev = get_gadget_data(g);
struct usb_endpoint_descriptor *chosen_desc = NULL;
struct usb_descriptor_header **speed_desc = NULL;
@@ -229,8 +228,12 @@ ep_found:
_ep->maxburst = comp_desc->bMaxBurst + 1;
break;
default:
- if (comp_desc->bMaxBurst != 0)
+ if (comp_desc->bMaxBurst != 0) {
+ struct usb_composite_dev *cdev;
+
+ cdev = get_gadget_data(g);
ERROR(cdev, "ep0 bMaxBurst must be 0\n");
+ }
_ep->maxburst = 1;
break;
}
Patches currently in stable-queue which might be from colin.king(a)canonical.com are
queue-4.9/usb-gadget-don-t-dereference-g-until-after-it-has-been-null-checked.patch