- Linux-stable-mirror - lists.linaro.org

FAILED: patch "[PATCH] kbuild: userprogs: use correct linker when mixing clang and" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 936599ca514973d44a766b7376c6bbdc96b6a8cc # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082106-geiger-canister-107c@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 936599ca514973d44a766b7376c6bbdc96b6a8cc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= <thomas.weissschuh(a)linutronix.de> Date: Mon, 28 Jul 2025 15:47:37 +0200 Subject: [PATCH] kbuild: userprogs: use correct linker when mixing clang and GNU ld MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The userprogs infrastructure does not expect clang being used with GNU ld and in that case uses /usr/bin/ld for linking, not the configured $(LD). This fallback is problematic as it will break when cross-compiling. Mixing clang and GNU ld is used for example when building for SPARC64, as ld.lld is not sufficient; see Documentation/kbuild/llvm.rst. Relax the check around --ld-path so it gets used for all linkers. Fixes: dfc1b168a8c4 ("kbuild: userprogs: use correct lld when linking through clang") Cc: stable(a)vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> Reviewed-by: Nathan Chancellor <nathan(a)kernel.org> Signed-off-by: Masahiro Yamada <masahiroy(a)kernel.org> diff --git a/Makefile b/Makefile index ba0827a1fccd..f4009f7238c7 100644 --- a/Makefile +++ b/Makefile @@ -1134,7 +1134,7 @@ KBUILD_USERCFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)) # userspace programs are linked via the compiler, use the correct linker -ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_LD_IS_LLD),yy) +ifdef CONFIG_CC_IS_CLANG KBUILD_USERLDFLAGS += --ld-path=$(LD) endif

3 weeks, 6 days

2
1
0 0

FAILED: patch "[PATCH] kbuild: userprogs: use correct linker when mixing clang and" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 936599ca514973d44a766b7376c6bbdc96b6a8cc # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082105-sessions-superhero-9a5f@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 936599ca514973d44a766b7376c6bbdc96b6a8cc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= <thomas.weissschuh(a)linutronix.de> Date: Mon, 28 Jul 2025 15:47:37 +0200 Subject: [PATCH] kbuild: userprogs: use correct linker when mixing clang and GNU ld MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The userprogs infrastructure does not expect clang being used with GNU ld and in that case uses /usr/bin/ld for linking, not the configured $(LD). This fallback is problematic as it will break when cross-compiling. Mixing clang and GNU ld is used for example when building for SPARC64, as ld.lld is not sufficient; see Documentation/kbuild/llvm.rst. Relax the check around --ld-path so it gets used for all linkers. Fixes: dfc1b168a8c4 ("kbuild: userprogs: use correct lld when linking through clang") Cc: stable(a)vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> Reviewed-by: Nathan Chancellor <nathan(a)kernel.org> Signed-off-by: Masahiro Yamada <masahiroy(a)kernel.org> diff --git a/Makefile b/Makefile index ba0827a1fccd..f4009f7238c7 100644 --- a/Makefile +++ b/Makefile @@ -1134,7 +1134,7 @@ KBUILD_USERCFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)) # userspace programs are linked via the compiler, use the correct linker -ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_LD_IS_LLD),yy) +ifdef CONFIG_CC_IS_CLANG KBUILD_USERLDFLAGS += --ld-path=$(LD) endif

3 weeks, 6 days

2
1
0 0

FAILED: patch "[PATCH] kbuild: userprogs: use correct linker when mixing clang and" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 936599ca514973d44a766b7376c6bbdc96b6a8cc # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082104-cosigner-parabola-3836@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 936599ca514973d44a766b7376c6bbdc96b6a8cc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= <thomas.weissschuh(a)linutronix.de> Date: Mon, 28 Jul 2025 15:47:37 +0200 Subject: [PATCH] kbuild: userprogs: use correct linker when mixing clang and GNU ld MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The userprogs infrastructure does not expect clang being used with GNU ld and in that case uses /usr/bin/ld for linking, not the configured $(LD). This fallback is problematic as it will break when cross-compiling. Mixing clang and GNU ld is used for example when building for SPARC64, as ld.lld is not sufficient; see Documentation/kbuild/llvm.rst. Relax the check around --ld-path so it gets used for all linkers. Fixes: dfc1b168a8c4 ("kbuild: userprogs: use correct lld when linking through clang") Cc: stable(a)vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> Reviewed-by: Nathan Chancellor <nathan(a)kernel.org> Signed-off-by: Masahiro Yamada <masahiroy(a)kernel.org> diff --git a/Makefile b/Makefile index ba0827a1fccd..f4009f7238c7 100644 --- a/Makefile +++ b/Makefile @@ -1134,7 +1134,7 @@ KBUILD_USERCFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)) # userspace programs are linked via the compiler, use the correct linker -ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_LD_IS_LLD),yy) +ifdef CONFIG_CC_IS_CLANG KBUILD_USERLDFLAGS += --ld-path=$(LD) endif

3 weeks, 6 days

2
1
0 0

FAILED: patch "[PATCH] kbuild: userprogs: use correct linker when mixing clang and" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 936599ca514973d44a766b7376c6bbdc96b6a8cc # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082104-shadow-nutlike-7f81@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 936599ca514973d44a766b7376c6bbdc96b6a8cc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= <thomas.weissschuh(a)linutronix.de> Date: Mon, 28 Jul 2025 15:47:37 +0200 Subject: [PATCH] kbuild: userprogs: use correct linker when mixing clang and GNU ld MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The userprogs infrastructure does not expect clang being used with GNU ld and in that case uses /usr/bin/ld for linking, not the configured $(LD). This fallback is problematic as it will break when cross-compiling. Mixing clang and GNU ld is used for example when building for SPARC64, as ld.lld is not sufficient; see Documentation/kbuild/llvm.rst. Relax the check around --ld-path so it gets used for all linkers. Fixes: dfc1b168a8c4 ("kbuild: userprogs: use correct lld when linking through clang") Cc: stable(a)vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> Reviewed-by: Nathan Chancellor <nathan(a)kernel.org> Signed-off-by: Masahiro Yamada <masahiroy(a)kernel.org> diff --git a/Makefile b/Makefile index ba0827a1fccd..f4009f7238c7 100644 --- a/Makefile +++ b/Makefile @@ -1134,7 +1134,7 @@ KBUILD_USERCFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)) # userspace programs are linked via the compiler, use the correct linker -ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_LD_IS_LLD),yy) +ifdef CONFIG_CC_IS_CLANG KBUILD_USERLDFLAGS += --ld-path=$(LD) endif

3 weeks, 6 days

2
1
0 0

FAILED: patch "[PATCH] ata: Fix SATA_MOBILE_LPM_POLICY description in Kconfig" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x ed62a62a18bc144f73eadf866ae46842e8f6606e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082138-collected-demeaning-2359@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ed62a62a18bc144f73eadf866ae46842e8f6606e Mon Sep 17 00:00:00 2001 From: Damien Le Moal <dlemoal(a)kernel.org> Date: Wed, 18 Jun 2025 16:25:19 +0900 Subject: [PATCH] ata: Fix SATA_MOBILE_LPM_POLICY description in Kconfig Improve the description of the possible default SATA link power management policies and add the missing description for policy 5. No functional changes. Fixes: a5ec5a7bfd1f ("ata: ahci: Support state with min power but Partial low power state") Cc: stable(a)vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal(a)kernel.org> Reviewed-by: Hannes Reinecke <hare(a)suse.de> Reviewed-by: Niklas Cassel <cassel(a)kernel.org> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e00536b49552..120a2b7067fc 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -117,23 +117,39 @@ config SATA_AHCI config SATA_MOBILE_LPM_POLICY int "Default SATA Link Power Management policy" - range 0 4 + range 0 5 default 3 depends on SATA_AHCI help Select the Default SATA Link Power Management (LPM) policy to use for chipsets / "South Bridges" supporting low-power modes. Such chipsets are ubiquitous across laptops, desktops and servers. + Each policy combines power saving states and features: + - Partial: The Phy logic is powered but is in a reduced power + state. The exit latency from this state is no longer than + 10us). + - Slumber: The Phy logic is powered but is in an even lower power + state. The exit latency from this state is potentially + longer, but no longer than 10ms. + - DevSleep: The Phy logic may be powered down. The exit latency from + this state is no longer than 20 ms, unless otherwise + specified by DETO in the device Identify Device Data log. + - HIPM: Host Initiated Power Management (host automatically + transitions to partial and slumber). + - DIPM: Device Initiated Power Management (device automatically + transitions to partial and slumber). - The value set has the following meanings: + The possible values for the default SATA link power management + policies are: 0 => Keep firmware settings - 1 => Maximum performance - 2 => Medium power - 3 => Medium power with Device Initiated PM enabled - 4 => Minimum power + 1 => No power savings (maximum performance) + 2 => HIPM (Partial) + 3 => HIPM (Partial) and DIPM (Partial and Slumber) + 4 => HIPM (Partial and DevSleep) and DIPM (Partial and Slumber) + 5 => HIPM (Slumber and DevSleep) and DIPM (Partial and Slumber) - Note "Minimum power" is known to cause issues, including disk - corruption, with some disks and should not be used. + Excluding the value 0, higher values represent policies with higher + power savings. config SATA_AHCI_PLATFORM tristate "Platform AHCI SATA support"

3 weeks, 6 days

2
1
0 0

FAILED: patch "[PATCH] ata: Fix SATA_MOBILE_LPM_POLICY description in Kconfig" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x ed62a62a18bc144f73eadf866ae46842e8f6606e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082138-moustache-breezy-3b73@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ed62a62a18bc144f73eadf866ae46842e8f6606e Mon Sep 17 00:00:00 2001 From: Damien Le Moal <dlemoal(a)kernel.org> Date: Wed, 18 Jun 2025 16:25:19 +0900 Subject: [PATCH] ata: Fix SATA_MOBILE_LPM_POLICY description in Kconfig Improve the description of the possible default SATA link power management policies and add the missing description for policy 5. No functional changes. Fixes: a5ec5a7bfd1f ("ata: ahci: Support state with min power but Partial low power state") Cc: stable(a)vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal(a)kernel.org> Reviewed-by: Hannes Reinecke <hare(a)suse.de> Reviewed-by: Niklas Cassel <cassel(a)kernel.org> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e00536b49552..120a2b7067fc 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -117,23 +117,39 @@ config SATA_AHCI config SATA_MOBILE_LPM_POLICY int "Default SATA Link Power Management policy" - range 0 4 + range 0 5 default 3 depends on SATA_AHCI help Select the Default SATA Link Power Management (LPM) policy to use for chipsets / "South Bridges" supporting low-power modes. Such chipsets are ubiquitous across laptops, desktops and servers. + Each policy combines power saving states and features: + - Partial: The Phy logic is powered but is in a reduced power + state. The exit latency from this state is no longer than + 10us). + - Slumber: The Phy logic is powered but is in an even lower power + state. The exit latency from this state is potentially + longer, but no longer than 10ms. + - DevSleep: The Phy logic may be powered down. The exit latency from + this state is no longer than 20 ms, unless otherwise + specified by DETO in the device Identify Device Data log. + - HIPM: Host Initiated Power Management (host automatically + transitions to partial and slumber). + - DIPM: Device Initiated Power Management (device automatically + transitions to partial and slumber). - The value set has the following meanings: + The possible values for the default SATA link power management + policies are: 0 => Keep firmware settings - 1 => Maximum performance - 2 => Medium power - 3 => Medium power with Device Initiated PM enabled - 4 => Minimum power + 1 => No power savings (maximum performance) + 2 => HIPM (Partial) + 3 => HIPM (Partial) and DIPM (Partial and Slumber) + 4 => HIPM (Partial and DevSleep) and DIPM (Partial and Slumber) + 5 => HIPM (Slumber and DevSleep) and DIPM (Partial and Slumber) - Note "Minimum power" is known to cause issues, including disk - corruption, with some disks and should not be used. + Excluding the value 0, higher values represent policies with higher + power savings. config SATA_AHCI_PLATFORM tristate "Platform AHCI SATA support"

3 weeks, 6 days

2
1
0 0

[PATCH v3] mm/damon/core: set quota->charged_from to jiffies at first charge window

by Sang-Heon Jeon

Kernel initialize "jiffies" timer as 5 minutes below zero, as shown in include/linux/jiffies.h /* * Have the 32 bit jiffies value wrap 5 minutes after boot * so jiffies wrap bugs show up earlier. */ #define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ)) And jiffies comparison help functions cast unsigned value to signed to cover wraparound #define time_after_eq(a,b) \ (typecheck(unsigned long, a) && \ typecheck(unsigned long, b) && \ ((long)((a) - (b)) >= 0)) When quota->charged_from is initialized to 0, time_after_eq() can incorrectly return FALSE even after reset_interval has elapsed. This occurs when (jiffies - reset_interval) produces a value with MSB=1, which is interpreted as negative in signed arithmetic. This issue primarily affects 32-bit systems because: On 64-bit systems: MSB=1 values occur after ~292 million years from boot (assuming HZ=1000), almost impossible. On 32-bit systems: MSB=1 values occur during the first 5 minutes after boot, and the second half of every jiffies wraparound cycle, starting from day 25 (assuming HZ=1000) When above unexpected FALSE return from time_after_eq() occurs, the charging window will not reset. The user impact depends on esz value at that time. If esz is 0, scheme ignores configured quotas and runs without any limits. If esz is not 0, scheme stops working once the quota is exhausted. It remains until the charging window finally resets. So, change quota->charged_from to jiffies at damos_adjust_quota() when it is considered as the first charge window. By this change, we can avoid unexpected FALSE return from time_after_eq() Fixes: 2b8a248d5873 ("mm/damon/schemes: implement size quota for schemes application speed control") # 5.16 Cc: stable(a)vger.kernel.org Signed-off-by: Sang-Heon Jeon <ekffu200098(a)gmail.com> --- Changes from v2 [2] - remove unnecessary example about time_after_eq() - remove description of unexpected reset of quota->charged_from - clarify user impacts and when bug happens Changes from v1 [1] - not change current default value of quota->charged_from - set quota->charged_from when it is consider first charge below - add more description of jiffies and wraparound example to commit messages [1] https://lore.kernel.org/damon/20250818183803.1450539-1-ekffu200098@gmail.co… [2] https://lore.kernel.org/damon/20250819150123.1532458-1-ekffu200098@gmail.co… --- mm/damon/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/mm/damon/core.c b/mm/damon/core.c index cb41fddca78c..93bad6d0da5b 100644 --- a/mm/damon/core.c +++ b/mm/damon/core.c @@ -2130,6 +2130,10 @@ static void damos_adjust_quota(struct damon_ctx *c, struct damos *s) if (!quota->ms && !quota->sz && list_empty(&quota->goals)) return; + /* First charge window */ + if (!quota->total_charged_sz && !quota->charged_from) + quota->charged_from = jiffies; + /* New charge window starts */ if (time_after_eq(jiffies, quota->charged_from + msecs_to_jiffies(quota->reset_interval))) { -- 2.43.0

3 weeks, 6 days

2
2
0 0

FAILED: patch "[PATCH] ata: Fix SATA_MOBILE_LPM_POLICY description in Kconfig" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x ed62a62a18bc144f73eadf866ae46842e8f6606e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082137-platypus-ditzy-1762@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ed62a62a18bc144f73eadf866ae46842e8f6606e Mon Sep 17 00:00:00 2001 From: Damien Le Moal <dlemoal(a)kernel.org> Date: Wed, 18 Jun 2025 16:25:19 +0900 Subject: [PATCH] ata: Fix SATA_MOBILE_LPM_POLICY description in Kconfig Improve the description of the possible default SATA link power management policies and add the missing description for policy 5. No functional changes. Fixes: a5ec5a7bfd1f ("ata: ahci: Support state with min power but Partial low power state") Cc: stable(a)vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal(a)kernel.org> Reviewed-by: Hannes Reinecke <hare(a)suse.de> Reviewed-by: Niklas Cassel <cassel(a)kernel.org> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e00536b49552..120a2b7067fc 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -117,23 +117,39 @@ config SATA_AHCI config SATA_MOBILE_LPM_POLICY int "Default SATA Link Power Management policy" - range 0 4 + range 0 5 default 3 depends on SATA_AHCI help Select the Default SATA Link Power Management (LPM) policy to use for chipsets / "South Bridges" supporting low-power modes. Such chipsets are ubiquitous across laptops, desktops and servers. + Each policy combines power saving states and features: + - Partial: The Phy logic is powered but is in a reduced power + state. The exit latency from this state is no longer than + 10us). + - Slumber: The Phy logic is powered but is in an even lower power + state. The exit latency from this state is potentially + longer, but no longer than 10ms. + - DevSleep: The Phy logic may be powered down. The exit latency from + this state is no longer than 20 ms, unless otherwise + specified by DETO in the device Identify Device Data log. + - HIPM: Host Initiated Power Management (host automatically + transitions to partial and slumber). + - DIPM: Device Initiated Power Management (device automatically + transitions to partial and slumber). - The value set has the following meanings: + The possible values for the default SATA link power management + policies are: 0 => Keep firmware settings - 1 => Maximum performance - 2 => Medium power - 3 => Medium power with Device Initiated PM enabled - 4 => Minimum power + 1 => No power savings (maximum performance) + 2 => HIPM (Partial) + 3 => HIPM (Partial) and DIPM (Partial and Slumber) + 4 => HIPM (Partial and DevSleep) and DIPM (Partial and Slumber) + 5 => HIPM (Slumber and DevSleep) and DIPM (Partial and Slumber) - Note "Minimum power" is known to cause issues, including disk - corruption, with some disks and should not be used. + Excluding the value 0, higher values represent policies with higher + power savings. config SATA_AHCI_PLATFORM tristate "Platform AHCI SATA support"

3 weeks, 6 days

2
1
0 0

FAILED: patch "[PATCH] bus: mhi: host: Detect events pointing to unexpected TREs" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 5bd398e20f0833ae8a1267d4f343591a2dd20185 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082132-hurricane-stank-2ae5@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5bd398e20f0833ae8a1267d4f343591a2dd20185 Mon Sep 17 00:00:00 2001 From: Youssef Samir <quic_yabdulra(a)quicinc.com> Date: Mon, 14 Jul 2025 18:30:39 +0200 Subject: [PATCH] bus: mhi: host: Detect events pointing to unexpected TREs When a remote device sends a completion event to the host, it contains a pointer to the consumed TRE. The host uses this pointer to process all of the TREs between it and the host's local copy of the ring's read pointer. This works when processing completion for chained transactions, but can lead to nasty results if the device sends an event for a single-element transaction with a read pointer that is multiple elements ahead of the host's read pointer. For instance, if the host accesses an event ring while the device is updating it, the pointer inside of the event might still point to an old TRE. If the host uses the channel's xfer_cb() to directly free the buffer pointed to by the TRE, the buffer will be double-freed. This behavior was observed on an ep that used upstream EP stack without 'commit 6f18d174b73d ("bus: mhi: ep: Update read pointer only after buffer is written")'. Where the device updated the events ring pointer before updating the event contents, so it left a window where the host was able to access the stale data the event pointed to, before the device had the chance to update them. The usual pattern was that the host received an event pointing to a TRE that is not immediately after the last processed one, so it got treated as if it was a chained transaction, processing all of the TREs in between the two read pointers. This commit aims to harden the host by ensuring transactions where the event points to a TRE that isn't local_rp + 1 are chained. Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device") Signed-off-by: Youssef Samir <quic_yabdulra(a)quicinc.com> [mani: added stable tag and reworded commit message] Signed-off-by: Manivannan Sadhasivam <mani(a)kernel.org> Reviewed-by: Jeff Hugo <jeff.hugo(a)oss.qualcomm.com> Cc: stable(a)vger.kernel.org Link: https://patch.msgid.link/20250714163039.3438985-1-quic_yabdulra@quicinc.com diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c index 3041ee6747e3..52bef663e182 100644 --- a/drivers/bus/mhi/host/main.c +++ b/drivers/bus/mhi/host/main.c @@ -602,7 +602,7 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl, { dma_addr_t ptr = MHI_TRE_GET_EV_PTR(event); struct mhi_ring_element *local_rp, *ev_tre; - void *dev_rp; + void *dev_rp, *next_rp; struct mhi_buf_info *buf_info; u16 xfer_len; @@ -621,6 +621,16 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl, result.dir = mhi_chan->dir; local_rp = tre_ring->rp; + + next_rp = local_rp + 1; + if (next_rp >= tre_ring->base + tre_ring->len) + next_rp = tre_ring->base; + if (dev_rp != next_rp && !MHI_TRE_DATA_GET_CHAIN(local_rp)) { + dev_err(&mhi_cntrl->mhi_dev->dev, + "Event element points to an unexpected TRE\n"); + break; + } + while (local_rp != dev_rp) { buf_info = buf_ring->rp; /* If it's the last TRE, get length from the event */

3 weeks, 6 days

2
1
0 0

FAILED: patch "[PATCH] usb: dwc3: imx8mp: fix device leak at unbind" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 086a0e516f7b3844e6328a5c69e2708b66b0ce18 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082121-magician-conceal-4df0@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 086a0e516f7b3844e6328a5c69e2708b66b0ce18 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Thu, 24 Jul 2025 11:19:06 +0200 Subject: [PATCH] usb: dwc3: imx8mp: fix device leak at unbind Make sure to drop the reference to the dwc3 device taken by of_find_device_by_node() on probe errors and on driver unbind. Fixes: 6dd2565989b4 ("usb: dwc3: add imx8mp dwc3 glue layer driver") Cc: stable(a)vger.kernel.org # 5.12 Cc: Li Jun <jun.li(a)nxp.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> Link: https://lore.kernel.org/r/20250724091910.21092-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c index 3edc5aca76f9..bce6af82f54c 100644 --- a/drivers/usb/dwc3/dwc3-imx8mp.c +++ b/drivers/usb/dwc3/dwc3-imx8mp.c @@ -244,7 +244,7 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev) IRQF_ONESHOT, dev_name(dev), dwc3_imx); if (err) { dev_err(dev, "failed to request IRQ #%d --> %d\n", irq, err); - goto depopulate; + goto put_dwc3; } device_set_wakeup_capable(dev, true); @@ -252,6 +252,8 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev) return 0; +put_dwc3: + put_device(&dwc3_imx->dwc3->dev); depopulate: of_platform_depopulate(dev); remove_swnode: @@ -265,8 +267,11 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev) static void dwc3_imx8mp_remove(struct platform_device *pdev) { + struct dwc3_imx8mp *dwc3_imx = platform_get_drvdata(pdev); struct device *dev = &pdev->dev; + put_device(&dwc3_imx->dwc3->dev); + pm_runtime_get_sync(dev); of_platform_depopulate(dev); device_remove_software_node(dev);

3 weeks, 6 days

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror