- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "ARM: dts: Fix omap3 off mode pull defines" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Fix omap3 off mode pull defines to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-fix-omap3-off-mode-pull-defines.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Tony Lindgren <tony(a)atomide.com> Date: Thu, 5 Jan 2017 11:07:18 -0800 Subject: ARM: dts: Fix omap3 off mode pull defines From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit d97556c8012015901a3ce77f46960078139cd79d ] We need to also have OFFPULLUDENABLE bit set to use the off mode pull values. Otherwise the line is pulled down internally if no external pull exists. This is has some documentation at: http://processors.wiki.ti.com/index.php/Optimizing_OMAP35x_and_AM/DM37x_OFF… Note that the value is still glitchy during off mode transitions as documented in spz319f.pdf "Advisory 1.45". It's best to use external pulls instead of relying on the internal ones for off mode and even then anything pulled up will get driven down momentarily on off mode restore for GPIO banks other than bank1. Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/dt-bindings/pinctrl/omap.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/include/dt-bindings/pinctrl/omap.h +++ b/include/dt-bindings/pinctrl/omap.h @@ -45,8 +45,8 @@ #define PIN_OFF_NONE 0 #define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL) #define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN) -#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP) -#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN) +#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFFOUT_EN | OFF_PULL_EN | OFF_PULL_UP) +#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFFOUT_EN | OFF_PULL_EN) #define PIN_OFF_WAKEUPENABLE WAKEUP_EN /* Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.9/arm-dts-omap5-uevm-allow-bootloader-to-configure-usb-ethernet-mac.patch queue-4.9/arm-dts-fix-omap3-off-mode-pull-defines.patch queue-4.9/arm-dts-fix-compatible-for-ti81xx-uarts-for-8250.patch queue-4.9/arm-omap2-fix-init-for-multiple-quirks-for-the-same-soc.patch queue-4.9/arm-dts-fix-am335x-and-dm814x-scm-syscon-to-probe-children.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-omap5-uevm-allow-bootloader-to-configure-usb-ethernet-mac.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Tony Lindgren <tony(a)atomide.com> Date: Thu, 5 Jan 2017 08:37:02 -0800 Subject: ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit e13a22a406f20322651b8c0847f4210bdef246d1 ] Note that with 9730 the wiring is different compared to 9514 found on beagleboard xm for example. On beagleboard xm we have: /sys/bus/usb/devices/1-2 hub /sys/bus/usb/devices/1-2.1 9514 While on omap5-uevm we have: /sys/bus/usb/devices/1-2 hub /sys/bus/usb/devices/1-3 9730 Cc: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/omap5-uevm.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -18,6 +18,10 @@ reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */ }; + aliases { + ethernet = &ethernet; + }; + leds { compatible = "gpio-leds"; led1 { @@ -72,6 +76,23 @@ >; }; +&usbhsehci { + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ethernet: usbether@3 { + compatible = "usb424,9730"; + reg = <3>; + }; +}; + &wlcore { compatible = "ti,wl1837"; }; Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.9/arm-dts-omap5-uevm-allow-bootloader-to-configure-usb-ethernet-mac.patch queue-4.9/arm-dts-fix-omap3-off-mode-pull-defines.patch queue-4.9/arm-dts-fix-compatible-for-ti81xx-uarts-for-8250.patch queue-4.9/arm-omap2-fix-init-for-multiple-quirks-for-the-same-soc.patch queue-4.9/arm-dts-fix-am335x-and-dm814x-scm-syscon-to-probe-children.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "ARM: dts: Fix compatible for ti81xx uarts for 8250" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Fix compatible for ti81xx uarts for 8250 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-fix-compatible-for-ti81xx-uarts-for-8250.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Tony Lindgren <tony(a)atomide.com> Date: Thu, 5 Jan 2017 11:17:30 -0800 Subject: ARM: dts: Fix compatible for ti81xx uarts for 8250 From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit f62280efe8934a1275fd148ef302d1afec8cd3df ] When using 8250_omap driver, we need to specify the right compatible value for the UART to work on dm814x and dm816x. Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/dm814x.dtsi | 6 +++--- arch/arm/boot/dts/dm816x.dtsi | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -252,7 +252,7 @@ }; uart1: uart@20000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x20000 0x2000>; clock-frequency = <48000000>; @@ -262,7 +262,7 @@ }; uart2: uart@22000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x22000 0x2000>; clock-frequency = <48000000>; @@ -272,7 +272,7 @@ }; uart3: uart@24000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x24000 0x2000>; clock-frequency = <48000000>; --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -371,7 +371,7 @@ }; uart1: uart@48020000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x48020000 0x2000>; clock-frequency = <48000000>; @@ -381,7 +381,7 @@ }; uart2: uart@48022000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x48022000 0x2000>; clock-frequency = <48000000>; @@ -391,7 +391,7 @@ }; uart3: uart@48024000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x48024000 0x2000>; clock-frequency = <48000000>; Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.9/arm-dts-omap5-uevm-allow-bootloader-to-configure-usb-ethernet-mac.patch queue-4.9/arm-dts-fix-omap3-off-mode-pull-defines.patch queue-4.9/arm-dts-fix-compatible-for-ti81xx-uarts-for-8250.patch queue-4.9/arm-omap2-fix-init-for-multiple-quirks-for-the-same-soc.patch queue-4.9/arm-dts-fix-am335x-and-dm814x-scm-syscon-to-probe-children.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "ARM: dts: Fix am335x and dm814x scm syscon to probe children" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: Fix am335x and dm814x scm syscon to probe children to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-fix-am335x-and-dm814x-scm-syscon-to-probe-children.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Tony Lindgren <tony(a)atomide.com> Date: Thu, 5 Jan 2017 11:10:40 -0800 Subject: ARM: dts: Fix am335x and dm814x scm syscon to probe children From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit 1aa09df0854efe16b7a80358a18f0a0bebafd246 ] Without these changes children of the scn syscon won't probe. Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am33xx.dtsi | 3 ++- arch/arm/boot/dts/dm814x.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -143,10 +143,11 @@ }; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0x800>; scm_clocks: clocks { #address-cells = <1>; --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -332,10 +332,11 @@ ranges = <0 0x140000 0x20000>; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0x800>; scm_clocks: clocks { #address-cells = <1>; Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.9/arm-dts-omap5-uevm-allow-bootloader-to-configure-usb-ethernet-mac.patch queue-4.9/arm-dts-fix-omap3-off-mode-pull-defines.patch queue-4.9/arm-dts-fix-compatible-for-ti81xx-uarts-for-8250.patch queue-4.9/arm-omap2-fix-init-for-multiple-quirks-for-the-same-soc.patch queue-4.9/arm-dts-fix-am335x-and-dm814x-scm-syscon-to-probe-children.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: vx: Don't try to update capture stream before running" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: vx: Don't try to update capture stream before running to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-vx-don-t-try-to-update-capture-stream-before-running.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Takashi Iwai <tiwai(a)suse.de> Date: Wed, 4 Jan 2017 12:34:14 +0100 Subject: ALSA: vx: Don't try to update capture stream before running From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit ed3c177d960bb5881b945ca6f784868126bb90db ] The update of stream costs significantly, and we should avoid it unless the stream really has started. Check pipe->running flag instead of pipe->prepared. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/drivers/vx/vx_pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/sound/drivers/vx/vx_pcm.c +++ b/sound/drivers/vx/vx_pcm.c @@ -1015,7 +1015,7 @@ static void vx_pcm_capture_update(struct int size, space, count; struct snd_pcm_runtime *runtime = subs->runtime; - if (! pipe->prepared || (chip->chip_status & VX_STAT_IS_STALE)) + if (!pipe->running || (chip->chip_status & VX_STAT_IS_STALE)) return; size = runtime->buffer_size - snd_pcm_capture_avail(runtime); Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-4.9/alsa-vx-don-t-try-to-update-capture-stream-before-running.patch queue-4.9/alsa-vx-fix-possible-transfer-overflow.patch queue-4.9/alsa-hda-realtek-add-new-codec-id-alc299.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: vx: Fix possible transfer overflow" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: vx: Fix possible transfer overflow to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-vx-fix-possible-transfer-overflow.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Takashi Iwai <tiwai(a)suse.de> Date: Wed, 4 Jan 2017 12:19:15 +0100 Subject: ALSA: vx: Fix possible transfer overflow From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 874e1f6fad9a5184b67f4cee37c1335cd2cc5677 ] The pseudo DMA transfer codes in VX222 and VX-pocket driver have a slight bug where they check the buffer boundary wrongly, and may overflow. Also, the zero sample count might be handled badly for the playback (although it shouldn't happen in theory). This patch addresses these issues. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=141541 Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/drivers/vx/vx_pcm.c | 6 ++++-- sound/pci/vx222/vx222_ops.c | 12 ++++++------ sound/pcmcia/vx/vxp_ops.c | 12 ++++++------ 3 files changed, 16 insertions(+), 14 deletions(-) --- a/sound/drivers/vx/vx_pcm.c +++ b/sound/drivers/vx/vx_pcm.c @@ -1048,8 +1048,10 @@ static void vx_pcm_capture_update(struct /* ok, let's accelerate! */ int align = pipe->align * 3; space = (count / align) * align; - vx_pseudo_dma_read(chip, runtime, pipe, space); - count -= space; + if (space > 0) { + vx_pseudo_dma_read(chip, runtime, pipe, space); + count -= space; + } } /* read the rest of bytes */ while (count > 0) { --- a/sound/pci/vx222/vx222_ops.c +++ b/sound/pci/vx222/vx222_ops.c @@ -269,12 +269,12 @@ static void vx2_dma_write(struct vx_core /* Transfer using pseudo-dma. */ - if (offset + count > pipe->buffer_bytes) { + if (offset + count >= pipe->buffer_bytes) { int length = pipe->buffer_bytes - offset; count -= length; length >>= 2; /* in 32bit words */ /* Transfer using pseudo-dma. */ - while (length-- > 0) { + for (; length > 0; length--) { outl(cpu_to_le32(*addr), port); addr++; } @@ -284,7 +284,7 @@ static void vx2_dma_write(struct vx_core pipe->hw_ptr += count; count >>= 2; /* in 32bit words */ /* Transfer using pseudo-dma. */ - while (count-- > 0) { + for (; count > 0; count--) { outl(cpu_to_le32(*addr), port); addr++; } @@ -307,12 +307,12 @@ static void vx2_dma_read(struct vx_core vx2_setup_pseudo_dma(chip, 0); /* Transfer using pseudo-dma. */ - if (offset + count > pipe->buffer_bytes) { + if (offset + count >= pipe->buffer_bytes) { int length = pipe->buffer_bytes - offset; count -= length; length >>= 2; /* in 32bit words */ /* Transfer using pseudo-dma. */ - while (length-- > 0) + for (; length > 0; length--) *addr++ = le32_to_cpu(inl(port)); addr = (u32 *)runtime->dma_area; pipe->hw_ptr = 0; @@ -320,7 +320,7 @@ static void vx2_dma_read(struct vx_core pipe->hw_ptr += count; count >>= 2; /* in 32bit words */ /* Transfer using pseudo-dma. */ - while (count-- > 0) + for (; count > 0; count--) *addr++ = le32_to_cpu(inl(port)); vx2_release_pseudo_dma(chip); --- a/sound/pcmcia/vx/vxp_ops.c +++ b/sound/pcmcia/vx/vxp_ops.c @@ -369,12 +369,12 @@ static void vxp_dma_write(struct vx_core unsigned short *addr = (unsigned short *)(runtime->dma_area + offset); vx_setup_pseudo_dma(chip, 1); - if (offset + count > pipe->buffer_bytes) { + if (offset + count >= pipe->buffer_bytes) { int length = pipe->buffer_bytes - offset; count -= length; length >>= 1; /* in 16bit words */ /* Transfer using pseudo-dma. */ - while (length-- > 0) { + for (; length > 0; length--) { outw(cpu_to_le16(*addr), port); addr++; } @@ -384,7 +384,7 @@ static void vxp_dma_write(struct vx_core pipe->hw_ptr += count; count >>= 1; /* in 16bit words */ /* Transfer using pseudo-dma. */ - while (count-- > 0) { + for (; count > 0; count--) { outw(cpu_to_le16(*addr), port); addr++; } @@ -411,12 +411,12 @@ static void vxp_dma_read(struct vx_core if (snd_BUG_ON(count % 2)) return; vx_setup_pseudo_dma(chip, 0); - if (offset + count > pipe->buffer_bytes) { + if (offset + count >= pipe->buffer_bytes) { int length = pipe->buffer_bytes - offset; count -= length; length >>= 1; /* in 16bit words */ /* Transfer using pseudo-dma. */ - while (length-- > 0) + for (; length > 0; length--) *addr++ = le16_to_cpu(inw(port)); addr = (unsigned short *)runtime->dma_area; pipe->hw_ptr = 0; @@ -424,7 +424,7 @@ static void vxp_dma_read(struct vx_core pipe->hw_ptr += count; count >>= 1; /* in 16bit words */ /* Transfer using pseudo-dma. */ - while (count-- > 1) + for (; count > 1; count--) *addr++ = le16_to_cpu(inw(port)); /* Disable DMA */ pchip->regDIALOG &= ~VXP_DLG_DMAREAD_SEL_MASK; Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-4.9/alsa-vx-don-t-try-to-update-capture-stream-before-running.patch queue-4.9/alsa-vx-fix-possible-transfer-overflow.patch queue-4.9/alsa-hda-realtek-add-new-codec-id-alc299.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: hda/realtek - Add new codec ID ALC299" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: hda/realtek - Add new codec ID ALC299 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-hda-realtek-add-new-codec-id-alc299.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Nov 19 11:32:28 CET 2017 From: Kailang Yang <kailang(a)realtek.com> Date: Wed, 4 Jan 2017 14:49:07 +0800 Subject: ALSA: hda/realtek - Add new codec ID ALC299 From: Kailang Yang <kailang(a)realtek.com> [ Upstream commit 28f1f9b26cee161ddd3985b3eb78e3ffada08dda ] ALC299 was similar as ALC225. Add headset support for ALC299. ALC3271 was for Dell rename. Signed-off-by: Kailang Yang <kailang(a)realtek.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/pci/hda/patch_realtek.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -338,6 +338,7 @@ static void alc_fill_eapd_coef(struct hd case 0x10ec0288: case 0x10ec0295: case 0x10ec0298: + case 0x10ec0299: alc_update_coef_idx(codec, 0x10, 1<<9, 0); break; case 0x10ec0285: @@ -914,6 +915,7 @@ static struct alc_codec_rename_pci_table { 0x10ec0256, 0x1028, 0, "ALC3246" }, { 0x10ec0225, 0x1028, 0, "ALC3253" }, { 0x10ec0295, 0x1028, 0, "ALC3254" }, + { 0x10ec0299, 0x1028, 0, "ALC3271" }, { 0x10ec0670, 0x1025, 0, "ALC669X" }, { 0x10ec0676, 0x1025, 0, "ALC679X" }, { 0x10ec0282, 0x1043, 0, "ALC3229" }, @@ -3721,6 +3723,7 @@ static void alc_headset_mode_unplugged(s break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_process_coef_fw(codec, coef0225); break; case 0x10ec0867: @@ -3829,6 +3832,7 @@ static void alc_headset_mode_mic_in(stru break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_update_coef_idx(codec, 0x45, 0x3f<<10, 0x31<<10); snd_hda_set_pin_ctl_cache(codec, hp_pin, 0); alc_process_coef_fw(codec, coef0225); @@ -3887,6 +3891,7 @@ static void alc_headset_mode_default(str switch (codec->core.vendor_id) { case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_process_coef_fw(codec, coef0225); break; case 0x10ec0236: @@ -4004,6 +4009,7 @@ static void alc_headset_mode_ctia(struct break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_process_coef_fw(codec, coef0225); break; case 0x10ec0867: @@ -4098,6 +4104,7 @@ static void alc_headset_mode_omtp(struct break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_process_coef_fw(codec, coef0225); break; } @@ -4183,6 +4190,7 @@ static void alc_determine_headset_type(s break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: alc_process_coef_fw(codec, coef0225); msleep(800); val = alc_read_coef_idx(codec, 0x46); @@ -6251,6 +6259,7 @@ static int patch_alc269(struct hda_codec break; case 0x10ec0225: case 0x10ec0295: + case 0x10ec0299: spec->codec_variant = ALC269_TYPE_ALC225; break; case 0x10ec0234: @@ -7249,6 +7258,7 @@ static const struct hda_device_id snd_hd HDA_CODEC_ENTRY(0x10ec0294, "ALC294", patch_alc269), HDA_CODEC_ENTRY(0x10ec0295, "ALC295", patch_alc269), HDA_CODEC_ENTRY(0x10ec0298, "ALC298", patch_alc269), + HDA_CODEC_ENTRY(0x10ec0299, "ALC299", patch_alc269), HDA_CODEC_REV_ENTRY(0x10ec0861, 0x100340, "ALC660", patch_alc861), HDA_CODEC_ENTRY(0x10ec0660, "ALC660-VD", patch_alc861vd), HDA_CODEC_ENTRY(0x10ec0861, "ALC861", patch_alc861), Patches currently in stable-queue which might be from kailang(a)realtek.com are queue-4.9/alsa-hda-realtek-add-new-codec-id-alc299.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] [PATCH linux-4.4.y] dmaengine: dmatest: warn user when dma test times out

by Adam Wallis

From: Adam Wallis <awallis(a)codeaurora.org> commit a9df21e34b422f79d9a9fa5c3eff8c2a53491be6 upstream. This patch was backported and only needed a line adjustment. Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Ideally, this would be cleaned up in the thread handler, but at the very least, the kernel is left in a very precarious scenario that can lead to some long debug sessions when the crash comes later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197605 Signed-off-by: Adam Wallis <awallis(a)codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> --- drivers/dma/dmatest.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index b8576fd..1c7568c 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -634,6 +634,7 @@ static int dmatest_func(void *data) * free it this time?" dancing. For now, just * leave it dangling. */ + WARN(1, "dmatest: Kernel stack may be corrupted!!\n"); dmaengine_unmap_put(um); result("test timed out", total_tests, src_off, dst_off, len, 0); -- Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

7 years, 5 months

2
1
0 0

[Linux-stable-mirror] [PATCH-3.18.y 0/2] target: stable backports

by Nicholas A. Bellinger

From: Nicholas Bellinger <nab(a)linux-iscsi.org> Here are two target patches for v3.18.y stable, the first of which did not originally include a stable CC, and the latter did not apply due to a minor context change. The series has been cut against v3.18.81. Please apply at your earliest convenience. Thank you, --nab Bart Van Assche (1): target/iscsi: Fix iSCSI task reassignment handling Nicholas Bellinger (1): iscsi-target: Fix iscsi_np reset hung task during parallel delete drivers/target/iscsi/iscsi_target.c | 20 ++++++++------------ drivers/target/iscsi/iscsi_target_core.h | 1 + drivers/target/iscsi/iscsi_target_login.c | 7 +++++-- include/target/iscsi/iscsi_target_core.h | 1 + include/target/target_core_base.h | 1 + 5 files changed, 16 insertions(+), 14 deletions(-) -- 1.8.5.3

7 years, 5 months

3
5
0 0

[Linux-stable-mirror] Request for stable inclusion for Bluetooth QCA issue.

by Kai Heng Feng

Hi, Please include commit ("abde15d5eb3d Bluetooth: btusb: fix QCA Rome suspend/resume”) to stable. QCA ROME support was introduced in v4.1, so it should be included in v4.4+. This issue can solve a BLE connection issue for QCA ROME devices. Kai-Heng

7 years, 5 months

3
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror