- Linux-stable-mirror - lists.linaro.org

[PATCH 5.10/5.15] md/raid5: fix atomicity violation in raid5_cache_count

by Vasiliy Kovalev

From: Gui-Dong Han <2045gemini(a)gmail.com> [ Upstream commit dfd2bf436709b2bccb78c2dda550dde93700efa7 ] In raid5_cache_count(): if (conf->max_nr_stripes < conf->min_nr_stripes) return 0; return conf->max_nr_stripes - conf->min_nr_stripes; The current check is ineffective, as the values could change immediately after being checked. In raid5_set_cache_size(): ... conf->min_nr_stripes = size; ... while (size > conf->max_nr_stripes) conf->min_nr_stripes = conf->max_nr_stripes; ... Due to intermediate value updates in raid5_set_cache_size(), concurrent execution of raid5_cache_count() and raid5_set_cache_size() may lead to inconsistent reads of conf->max_nr_stripes and conf->min_nr_stripes. The current checks are ineffective as values could change immediately after being checked, raising the risk of conf->min_nr_stripes exceeding conf->max_nr_stripes and potentially causing an integer overflow. This possible bug is found by an experimental static analysis tool developed by our team. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported when our tool analyzes the source code of Linux 6.2. To resolve this issue, it is suggested to introduce local variables 'min_stripes' and 'max_stripes' in raid5_cache_count() to ensure the values remain stable throughout the check. Adding locks in raid5_cache_count() fails to resolve atomicity violations, as raid5_set_cache_size() may hold intermediate values of conf->min_nr_stripes while unlocked. With this patch applied, our tool no longer reports the bug, with the kernel configuration allyesconfig for x86_64. Due to the lack of associated hardware, we cannot test the patch in runtime testing, and just verify it according to the code logic. Fixes: edbe83ab4c27 ("md/raid5: allow the stripe_cache to grow and shrink.") Cc: stable(a)vger.kernel.org Signed-off-by: Gui-Dong Han <2045gemini(a)gmail.com> Reviewed-by: Yu Kuai <yukuai3(a)huawei.com> Signed-off-by: Song Liu <song(a)kernel.org> Link: https://lore.kernel.org/r/20240112071017.16313-1-2045gemini@gmail.com Signed-off-by: Song Liu <song(a)kernel.org> Signed-off-by: Vasiliy Kovalev <kovalev(a)altlinux.org> --- Backport to fix CVE-2024-23307 Link: https://www.cve.org/CVERecord/?id=CVE-2024-23307 --- drivers/md/raid5.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 7cdc6f20f50436..b1f038d71a4015 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2349,7 +2349,7 @@ static int grow_one_stripe(struct r5conf *conf, gfp_t gfp) atomic_inc(&conf->active_stripes); raid5_release_stripe(sh); - conf->max_nr_stripes++; + WRITE_ONCE(conf->max_nr_stripes, conf->max_nr_stripes + 1); return 1; } @@ -2646,7 +2646,7 @@ static int drop_one_stripe(struct r5conf *conf) shrink_buffers(sh); free_stripe(conf->slab_cache, sh); atomic_dec(&conf->active_stripes); - conf->max_nr_stripes--; + WRITE_ONCE(conf->max_nr_stripes, conf->max_nr_stripes - 1); return 1; } @@ -6575,7 +6575,7 @@ raid5_set_cache_size(struct mddev *mddev, int size) if (size <= 16 || size > 32768) return -EINVAL; - conf->min_nr_stripes = size; + WRITE_ONCE(conf->min_nr_stripes, size); mutex_lock(&conf->cache_size_mutex); while (size < conf->max_nr_stripes && drop_one_stripe(conf)) @@ -6587,7 +6587,7 @@ raid5_set_cache_size(struct mddev *mddev, int size) mutex_lock(&conf->cache_size_mutex); while (size > conf->max_nr_stripes) if (!grow_one_stripe(conf, GFP_KERNEL)) { - conf->min_nr_stripes = conf->max_nr_stripes; + WRITE_ONCE(conf->min_nr_stripes, conf->max_nr_stripes); result = -ENOMEM; break; } @@ -7151,11 +7151,13 @@ static unsigned long raid5_cache_count(struct shrinker *shrink, struct shrink_control *sc) { struct r5conf *conf = container_of(shrink, struct r5conf, shrinker); + int max_stripes = READ_ONCE(conf->max_nr_stripes); + int min_stripes = READ_ONCE(conf->min_nr_stripes); - if (conf->max_nr_stripes < conf->min_nr_stripes) + if (max_stripes < min_stripes) /* unlikely, but not impossible */ return 0; - return conf->max_nr_stripes - conf->min_nr_stripes; + return max_stripes - min_stripes; } static struct r5conf *setup_conf(struct mddev *mddev) -- 2.33.8

10 months

2
1
0 0

[PATCH 5/5] serial: sh-sci: Increment the runtime usage counter for the earlycon device

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> In the sh-sci driver, serial ports are mapped to the sci_ports[] array, with earlycon mapped at index zero. The uart_add_one_port() function eventually calls __device_attach(), which, in turn, calls pm_request_idle(). The identified code path is as follows: uart_add_one_port() -> serial_ctrl_register_port() -> serial_core_register_port() -> serial_core_port_device_add() -> serial_base_port_add() -> device_add() -> bus_probe_device() -> device_initial_probe() -> __device_attach() -> // ... if (dev->p->dead) { // ... } else if (dev->driver) { // ... } else { // ... pm_request_idle(dev); // ... } The earlycon device clocks are enabled by the bootloader. However, the pm_request_idle() call in __device_attach() disables the SCI port clocks while earlycon is still active. The earlycon write function, serial_console_write(), calls sci_poll_put_char() via serial_console_putchar(). If the SCI port clocks are disabled, writing to earlycon may sometimes cause the SR.TDFE bit to remain unset indefinitely, causing the while loop in sci_poll_put_char() to never exit. On single-core SoCs, this can result in the system being blocked during boot when this issue occurs. To resolve this, increment the runtime PM usage counter for the earlycon SCI device before registering the UART port. Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Cc: stable(a)vger.kernel.org Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Changes since RFT: - used spaced instead of tabs in the call trace from patch description - moved the comment in the code block started by if (sci_uart_earlycon && sci_ports[0].port.mapbase == sci_res->start) - still kept the sci_ports[0].port.mapbase == sci_res->start check as I haven't manage to find a better way drivers/tty/serial/sh-sci.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e64d59888ecd..b1ea48f38248 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -3436,6 +3436,22 @@ static int sci_probe_single(struct platform_device *dev, } if (sci_uart_earlycon && sci_ports[0].port.mapbase == sci_res->start) { + /* + * In case: + * - this is the earlycon port (mapped on index 0 in sci_ports[]) and + * - it now maps to an alias other than zero and + * - the earlycon is still alive (e.g., "earlycon keep_bootcon" is + * available in bootargs) + * + * we need to avoid disabling clocks and PM domains through the runtime + * PM APIs called in __device_attach(). For this, increment the runtime + * PM reference counter (the clocks and PM domains were already enabled + * by the bootloader). Otherwise the earlycon may access the HW when it + * has no clocks enabled leading to failures (infinite loop in + * sci_poll_put_char()). + */ + pm_runtime_get_noresume(&dev->dev); + /* * Skip cleanup the sci_port[0] in early_console_exit(), this * port is the same as the earlycon one. -- 2.43.0

10 months

1
0
0 0

[PATCH 4/5] serial: sh-sci: Clean sci_ports[0] after at earlycon exit

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> The early_console_setup() function initializes sci_ports[0].port with an object of type struct uart_port obtained from the struct earlycon_device passed as an argument to early_console_setup(). Later, during serial port probing, the serial port used as earlycon (e.g., port A) might be remapped to a different position in the sci_ports[] array, and a different serial port (e.g., port B) might be assigned to slot 0. For example: sci_ports[0] = port B sci_ports[X] = port A In this scenario, the new port mapped at index zero (port B) retains the data associated with the earlycon configuration. Consequently, after the Linux boot process, any access to the serial port now mapped to sci_ports[0] (port B) will block the original earlycon port (port A). To address this, introduce an early_console_exit() function to clean up sci_ports[0] when earlycon is exited. To prevent the cleanup of sci_ports[0] while the serial device is still being used by earlycon, introduce the struct sci_port::probing flag and account for it in early_console_exit(). Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Cc: stable(a)vger.kernel.org Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Changes since RFT: - converted "probing" member of struct sci_port to a local variable (named sci_uart_earlycon_dev_probing - used sci_uart_earlycon instead of sci_port::earlycon from RFT version - dropped the double "up" in the added comment - changed the cleanup condition in early_console_exit() to if (!sci_uart_earlycon_dev_probing) - set sci_uart_earlycon = false in early_console_exit() drivers/tty/serial/sh-sci.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index b85a9d425f7e..e64d59888ecd 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -166,6 +166,7 @@ static struct sci_port sci_ports[SCI_NPORTS]; static unsigned long sci_ports_in_use; static struct uart_driver sci_uart_driver; static bool sci_uart_earlycon; +static bool sci_uart_earlycon_dev_probing; static inline struct sci_port * to_sci_port(struct uart_port *uart) @@ -3386,7 +3387,8 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev, static int sci_probe_single(struct platform_device *dev, unsigned int index, struct plat_sci_port *p, - struct sci_port *sciport) + struct sci_port *sciport, + struct resource *sci_res) { int ret; @@ -3433,6 +3435,14 @@ static int sci_probe_single(struct platform_device *dev, sciport->port.flags |= UPF_HARD_FLOW; } + if (sci_uart_earlycon && sci_ports[0].port.mapbase == sci_res->start) { + /* + * Skip cleanup the sci_port[0] in early_console_exit(), this + * port is the same as the earlycon one. + */ + sci_uart_earlycon_dev_probing = true; + } + return uart_add_one_port(&sci_uart_driver, &sciport->port); } @@ -3491,7 +3501,7 @@ static int sci_probe(struct platform_device *dev) platform_set_drvdata(dev, sp); - ret = sci_probe_single(dev, dev_id, p, sp); + ret = sci_probe_single(dev, dev_id, p, sp, res); if (ret) return ret; @@ -3574,6 +3584,22 @@ sh_early_platform_init_buffer("earlyprintk", &sci_driver, #ifdef CONFIG_SERIAL_SH_SCI_EARLYCON static struct plat_sci_port port_cfg; +static int early_console_exit(struct console *co) +{ + struct sci_port *sci_port = &sci_ports[0]; + + /* + * Clean the slot used by earlycon. A new SCI device might + * map to this slot. + */ + if (!sci_uart_earlycon_dev_probing) { + memset(sci_port, 0, sizeof(*sci_port)); + sci_uart_earlycon = false; + } + + return 0; +} + static int __init early_console_setup(struct earlycon_device *device, int type) { @@ -3591,6 +3617,8 @@ static int __init early_console_setup(struct earlycon_device *device, SCSCR_RE | SCSCR_TE | port_cfg.scscr); device->con->write = serial_console_write; + device->con->exit = early_console_exit; + return 0; } static int __init sci_early_console_setup(struct earlycon_device *device, -- 2.43.0

10 months

1
0
0 0

[PATCH 3/5] serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> In the sh-sci driver, sci_ports[0] is used by earlycon. If the earlycon is still active when sci_probe() is called and the new serial port is supposed to map to sci_ports[0], return -EBUSY to prevent breaking the earlycon. This situation should occurs in debug scenarios, and users should be aware of the potential conflict. Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Cc: stable(a)vger.kernel.org Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Chances since RFT: - converted the earlycon member of struct sci_port to a local variable - added sp == &sci_ports[0] check in sci_probe() to be sure the code is checking against the sci_port used as earlycon - changed res->start != sp->port.mapbase condition to sp->port.mapbase != res->start to use the same pattern as used in patch 4/5 drivers/tty/serial/sh-sci.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 51382e354a2d..b85a9d425f7e 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -165,6 +165,7 @@ struct sci_port { static struct sci_port sci_ports[SCI_NPORTS]; static unsigned long sci_ports_in_use; static struct uart_driver sci_uart_driver; +static bool sci_uart_earlycon; static inline struct sci_port * to_sci_port(struct uart_port *uart) @@ -3438,6 +3439,7 @@ static int sci_probe_single(struct platform_device *dev, static int sci_probe(struct platform_device *dev) { struct plat_sci_port *p; + struct resource *res; struct sci_port *sp; unsigned int dev_id; int ret; @@ -3467,6 +3469,26 @@ static int sci_probe(struct platform_device *dev) } sp = &sci_ports[dev_id]; + + /* + * In case: + * - the probed port alias is zero (as the one used by earlycon), and + * - the earlycon is still active (e.g., "earlycon keep_bootcon" in + * bootargs) + * + * defer the probe of this serial. This is a debug scenario and the user + * must be aware of it. + * + * Except when the probed port is the same as the earlycon port. + */ + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + if (sci_uart_earlycon && sp == &sci_ports[0] && sp->port.mapbase != res->start) + return dev_err_probe(&dev->dev, -EBUSY, "sci_port[0] is used by earlycon!\n"); + platform_set_drvdata(dev, sp); ret = sci_probe_single(dev, dev_id, p, sp); @@ -3563,6 +3585,7 @@ static int __init early_console_setup(struct earlycon_device *device, port_cfg.type = type; sci_ports[0].cfg = &port_cfg; sci_ports[0].params = sci_probe_regmap(&port_cfg); + sci_uart_earlycon = true; port_cfg.scscr = sci_serial_in(&sci_ports[0].port, SCSCR); sci_serial_out(&sci_ports[0].port, SCSCR, SCSCR_RE | SCSCR_TE | port_cfg.scscr); -- 2.43.0

10 months

1
0
0 0

[PATCH 1/5] serial: sh-sci: Drop __initdata macro for port_cfg

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> The port_cfg object is used by serial_console_write(), which serves as the write function for the earlycon device. Marking port_cfg as __initdata causes it to be freed after kernel initialization, resulting in earlycon becoming unavailable thereafter. Remove the __initdata macro from port_cfg to resolve this issue. Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Cc: stable(a)vger.kernel.org Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Changes since RFT: - collected tags - used proper fixes commit drivers/tty/serial/sh-sci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e0c56c328d10..09e69cb7d798 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -3562,7 +3562,7 @@ sh_early_platform_init_buffer("earlyprintk", &sci_driver, early_serial_buf, ARRAY_SIZE(early_serial_buf)); #endif #ifdef CONFIG_SERIAL_SH_SCI_EARLYCON -static struct plat_sci_port port_cfg __initdata; +static struct plat_sci_port port_cfg; static int __init early_console_setup(struct earlycon_device *device, int type) -- 2.43.0

10 months

1
0
0 0

[PATCH v2 0/2] Tegra ADMA fixes

by Mohan Kumar D

- Fix build error due to 64-by-32 division - Additional check for adma max page Mohan Kumar D (2): dmaengine: tegra210-adma: Fix build error due to 64-by-32 division dmaengine: tegra210-adma: check for adma max page drivers/dma/tegra210-adma.c | 19 ++++++++++++++++--- drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 2 +- 2 files changed, 17 insertions(+), 4 deletions(-) -- 2.25.1

10 months

2
4
0 0

[PATCH v2] mailbox: zynqmp: Remove invalid __percpu annotation in zynqmp_ipi_probe()

by Uros Bizjak

struct zynqmp_ipi_pdata __percpu *pdata is not a per-cpu variable, so it should not be annotated with __percpu annotation. Remove invalid __percpu annotation to fix several zynqmp-ipi-mailbox.c:920:15: warning: incorrect type in assignment (different address spaces) zynqmp-ipi-mailbox.c:920:15: expected struct zynqmp_ipi_pdata [noderef] __percpu *pdata zynqmp-ipi-mailbox.c:920:15: got void * zynqmp-ipi-mailbox.c:927:56: warning: incorrect type in argument 3 (different address spaces) zynqmp-ipi-mailbox.c:927:56: expected unsigned int [usertype] *out_value zynqmp-ipi-mailbox.c:927:56: got unsigned int [noderef] __percpu * ... and several drivers/mailbox/zynqmp-ipi-mailbox.c:924:9: warning: dereference of noderef expression ... sparse warnings. There were no changes in the resulting object file. Cc: stable(a)vger.kernel.org Fixes: 6ffb1635341b ("mailbox: zynqmp: handle SGI for shared IPI") Signed-off-by: Uros Bizjak <ubizjak(a)gmail.com> Cc: Jassi Brar <jassisinghbrar(a)gmail.com> Cc: Michal Simek <michal.simek(a)amd.com> Cc: Tanmay Shah <tanmay.shah(a)amd.com> --- v2: - Fix typo in commit message - Add Fixes and Cc: stable. --- drivers/mailbox/zynqmp-ipi-mailbox.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mailbox/zynqmp-ipi-mailbox.c b/drivers/mailbox/zynqmp-ipi-mailbox.c index aa5249da59b2..0c143beaafda 100644 --- a/drivers/mailbox/zynqmp-ipi-mailbox.c +++ b/drivers/mailbox/zynqmp-ipi-mailbox.c @@ -905,7 +905,7 @@ static int zynqmp_ipi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *nc, *np = pdev->dev.of_node; - struct zynqmp_ipi_pdata __percpu *pdata; + struct zynqmp_ipi_pdata *pdata; struct of_phandle_args out_irq; struct zynqmp_ipi_mbox *mbox; int num_mboxes, ret = -EINVAL; -- 2.42.0

10 months

3
4
0 0

[PATCH v3] pmdomain: imx8mp-blk-ctrl: add missing loop break condition

by Xiaolei Wang

Currently imx8mp_blk_ctrl_remove() will continue the for loop until an out-of-bounds exception occurs. pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dev_pm_domain_detach+0x8/0x48 lr : imx8mp_blk_ctrl_shutdown+0x58/0x90 sp : ffffffc084f8bbf0 x29: ffffffc084f8bbf0 x28: ffffff80daf32ac0 x27: 0000000000000000 x26: ffffffc081658d78 x25: 0000000000000001 x24: ffffffc08201b028 x23: ffffff80d0db9490 x22: ffffffc082340a78 x21: 00000000000005b0 x20: ffffff80d19bc180 x19: 000000000000000a x18: ffffffffffffffff x17: ffffffc080a39e08 x16: ffffffc080a39c98 x15: 4f435f464f006c72 x14: 0000000000000004 x13: ffffff80d0172110 x12: 0000000000000000 x11: ffffff80d0537740 x10: ffffff80d05376c0 x9 : ffffffc0808ed2d8 x8 : ffffffc084f8bab0 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffffff80d19b9420 x4 : fffffffe03466e60 x3 : 0000000080800077 x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000000000 Call trace: dev_pm_domain_detach+0x8/0x48 platform_shutdown+0x2c/0x48 device_shutdown+0x158/0x268 kernel_restart_prepare+0x40/0x58 kernel_kexec+0x58/0xe8 __do_sys_reboot+0x198/0x258 __arm64_sys_reboot+0x2c/0x40 invoke_syscall+0x5c/0x138 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0xc8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 Code: 8128c2d0 ffffffc0 aa1e03e9 d503201f Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl") Cc: stable(a)vger.kernel.org Signed-off-by: Xiaolei Wang <xiaolei.wang(a)windriver.com> Reviewed-by: Lucas Stach <l.stach(a)pengutronix.de> Reviewed-by: Fabio Estevam <festevam(a)gmail.com> Reviewed-by: Frank Li <Frank.Li(a)nxp.com> --- v1: https://patchwork.kernel.org/project/imx/patch/20250113045609.842243-1-xiao… v2: Update commit subject v3: cc stable drivers/pmdomain/imx/imx8mp-blk-ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c index e3a0f64c144c..3668fe66b22c 100644 --- a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c +++ b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c @@ -770,7 +770,7 @@ static void imx8mp_blk_ctrl_remove(struct platform_device *pdev) of_genpd_del_provider(pdev->dev.of_node); - for (i = 0; bc->onecell_data.num_domains; i++) { + for (i = 0; i < bc->onecell_data.num_domains; i++) { struct imx8mp_blk_ctrl_domain *domain = &bc->domains[i]; pm_genpd_remove(&domain->genpd); -- 2.25.1

10 months

2
1
0 0

[PATCH 0/2] Tegra ADMA fixes

by Mohan Kumar D

- Fix build error due to 64-by-32 division - Additional check for adma max page Mohan Kumar D (2): dmaengine: tegra210-adma: Fix build error due to 64-by-32 division dmaengine: tegra210-adma: check for adma max page drivers/dma/tegra210-adma.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) -- 2.25.1

10 months

2
3
0 0

[PATCH] ntb: use 64-bit arithmetic for the MSI doorbell mask

by Fedor Pchelkin

msi_db_mask is of type 'u64', still the standard 'int' arithmetic is performed to compute its value. While most of the ntb_hw drivers actually don't utilize the higher 32 bits of the doorbell mask now, this may be the case for Switchtec - see switchtec_ntb_init_db(). Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool. Fixes: 2b0569b3b7e6 ("NTB: Add MSI interrupt support to ntb_transport") Cc: stable(a)vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin(a)ispras.ru> --- drivers/ntb/ntb_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index a22ea4a4b202..4f775c3e218f 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -1353,7 +1353,7 @@ static int ntb_transport_probe(struct ntb_client *self, struct ntb_dev *ndev) qp_count = ilog2(qp_bitmap); if (nt->use_msi) { qp_count -= 1; - nt->msi_db_mask = 1 << qp_count; + nt->msi_db_mask = BIT_ULL(qp_count); ntb_db_clear_mask(ndev, nt->msi_db_mask); } -- 2.39.5

10 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror