- Linux-stable-mirror - lists.linaro.org

[PATCH v2] hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key

by Vasiliy Kovalev

Syzbot reported an issue in hfs subsystem: BUG: KASAN: slab-out-of-bounds in memcpy_from_page include/linux/highmem.h:423 [inline] BUG: KASAN: slab-out-of-bounds in hfs_bnode_read fs/hfs/bnode.c:35 [inline] BUG: KASAN: slab-out-of-bounds in hfs_bnode_read_key+0x314/0x450 fs/hfs/bnode.c:70 Write of size 94 at addr ffff8880123cd100 by task syz-executor237/5102 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 memcpy_from_page include/linux/highmem.h:423 [inline] hfs_bnode_read fs/hfs/bnode.c:35 [inline] hfs_bnode_read_key+0x314/0x450 fs/hfs/bnode.c:70 hfs_brec_insert+0x7f3/0xbd0 fs/hfs/brec.c:159 hfs_cat_create+0x41d/0xa50 fs/hfs/catalog.c:118 hfs_mkdir+0x6c/0xe0 fs/hfs/dir.c:232 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdir fs/namei.c:4300 [inline] __se_sys_mkdir fs/namei.c:4298 [inline] __x64_sys_mkdir+0x6c/0x80 fs/namei.c:4298 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fbdd6057a99 Add validation for key length in hfs_bnode_read_key to prevent out-of-bounds memory access. Invalid key lengths, likely caused by corrupted file system images (potentially due to malformed data during image generation), now result in clearing the key buffer, enhancing stability and reliability. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+5f3a973ed3dfb85a6683(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=5f3a973ed3dfb85a6683 Cc: stable(a)vger.kernel.org Signed-off-by: Vasiliy Kovalev <kovalev(a)altlinux.org> --- v2: add more information to the commit message regarding the purpose of the patch. --- fs/hfs/bnode.c | 6 ++++++ fs/hfsplus/bnode.c | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/fs/hfs/bnode.c b/fs/hfs/bnode.c index 6add6ebfef8967..cb823a8a6ba960 100644 --- a/fs/hfs/bnode.c +++ b/fs/hfs/bnode.c @@ -67,6 +67,12 @@ void hfs_bnode_read_key(struct hfs_bnode *node, void *key, int off) else key_len = tree->max_key_len + 1; + if (key_len > sizeof(hfs_btree_key) || key_len < 1) { + memset(key, 0, sizeof(hfs_btree_key)); + pr_err("hfs: Invalid key length: %d\n", key_len); + return; + } + hfs_bnode_read(node, key, off, key_len); } diff --git a/fs/hfsplus/bnode.c b/fs/hfsplus/bnode.c index 87974d5e679156..079ea80534f7de 100644 --- a/fs/hfsplus/bnode.c +++ b/fs/hfsplus/bnode.c @@ -67,6 +67,12 @@ void hfs_bnode_read_key(struct hfs_bnode *node, void *key, int off) else key_len = tree->max_key_len + 2; + if (key_len > sizeof(hfsplus_btree_key) || key_len < 1) { + memset(key, 0, sizeof(hfsplus_btree_key)); + pr_err("hfsplus: Invalid key length: %d\n", key_len); + return; + } + hfs_bnode_read(node, key, off, key_len); } -- 2.33.8

10 months, 1 week

2
2
0 0

[PATCH] xfs: fix online repair probing when CONFIG_XFS_ONLINE_REPAIR=n

by Darrick J. Wong

From: Darrick J. Wong <djwong(a)kernel.org> I received a report from the release engineering side of the house that xfs_scrub without the -n flag (aka fix it mode) would try to fix a broken filesystem even on a kernel that doesn't have online repair built into it: # xfs_scrub -dTvn /mnt/test EXPERIMENTAL xfs_scrub program in use! Use at your own risk! Phase 1: Find filesystem geometry. /mnt/test: using 1 threads to scrub. Phase 1: Memory used: 132k/0k (108k/25k), time: 0.00/ 0.00/ 0.00s <snip> Phase 4: Repair filesystem. <snip> Info: /mnt/test/some/victimdir directory entries: Attempting repair. (repair.c line 351) Corruption: /mnt/test/some/victimdir directory entries: Repair unsuccessful; offline repair required. (repair.c line 204) Source: https://blogs.oracle.com/linux/post/xfs-online-filesystem-repair It is strange that xfs_scrub doesn't refuse to run, because the kernel is supposed to return EOPNOTSUPP if we actually needed to run a repair, and xfs_io's repair subcommand will perror that. And yet: # xfs_io -x -c 'repair probe' /mnt/test # The first problem is commit dcb660f9222fd9 (4.15) which should have had xchk_probe set the CORRUPT OFLAG so that any of the repair machinery will get called at all. It turns out that some refactoring that happened in the 6.6-6.8 era broke the operation of this corner case. What we *really* want to happen is that all the predicates that would steer xfs_scrub_metadata() towards calling xrep_attempt() should function the same way that they do when repair is compiled in; and then xrep_attempt gets to return the fatal EOPNOTSUPP error code that causes the probe to fail. Instead, commit 8336a64eb75cba (6.6) started the failwhale swimming by hoisting OFLAG checking logic into a helper whose non-repair stub always returns false, causing scrub to return "repair not needed" when in fact the repair is not supported. Prior to that commit, the oflag checking that was open-coded in scrub.c worked correctly. Similarly, in commit 4bdfd7d15747b1 (6.8) we hoisted the IFLAG_REPAIR and ALREADY_FIXED logic into a helper whose non-repair stub always returns false, so we never enter the if test body that would have called xrep_attempt, let alone fail to decode the OFLAGs correctly. The final insult (yes, we're doing The Naked Gun now) is commit 48a72f60861f79 (6.8) in which we hoisted the "are we going to try a repair?" predicate into yet another function with a non-repair stub always returns false. So. Fix xchk_probe to trigger xrep_probe, then fix all the other helper predicates in scrub.h so that we always point to xrep_attempt, even if online repair is disabled. Commit 48a72 is tagged here because the scrub code prior to LTS 6.12 are incomplete and not worth patching. Reported-by: David Flynn <david.flynn(a)oracle.com> Cc: <stable(a)vger.kernel.org> # v6.8 Fixes: 48a72f60861f79 ("xfs: don't complain about unfixed metadata when repairs were injected") Signed-off-by: "Darrick J. Wong" <djwong(a)kernel.org> --- fs/xfs/scrub/common.h | 5 ----- fs/xfs/scrub/repair.h | 11 ++++++++++- fs/xfs/scrub/scrub.c | 9 +++++++++ 3 files changed, 19 insertions(+), 6 deletions(-) diff --git a/fs/xfs/scrub/common.h b/fs/xfs/scrub/common.h index eecb6d54c0f953..53a6b34ce54271 100644 --- a/fs/xfs/scrub/common.h +++ b/fs/xfs/scrub/common.h @@ -212,7 +212,6 @@ static inline bool xchk_skip_xref(struct xfs_scrub_metadata *sm) bool xchk_dir_looks_zapped(struct xfs_inode *dp); bool xchk_pptr_looks_zapped(struct xfs_inode *ip); -#ifdef CONFIG_XFS_ONLINE_REPAIR /* Decide if a repair is required. */ static inline bool xchk_needs_repair(const struct xfs_scrub_metadata *sm) { @@ -232,10 +231,6 @@ static inline bool xchk_could_repair(const struct xfs_scrub *sc) return (sc->sm->sm_flags & XFS_SCRUB_IFLAG_REPAIR) && !(sc->flags & XREP_ALREADY_FIXED); } -#else -# define xchk_needs_repair(sc) (false) -# define xchk_could_repair(sc) (false) -#endif /* CONFIG_XFS_ONLINE_REPAIR */ int xchk_metadata_inode_forks(struct xfs_scrub *sc); diff --git a/fs/xfs/scrub/repair.h b/fs/xfs/scrub/repair.h index b649da1a93eb8c..b3b1fe62814e7b 100644 --- a/fs/xfs/scrub/repair.h +++ b/fs/xfs/scrub/repair.h @@ -173,7 +173,16 @@ bool xrep_buf_verify_struct(struct xfs_buf *bp, const struct xfs_buf_ops *ops); #else #define xrep_ino_dqattach(sc) (0) -#define xrep_will_attempt(sc) (false) + +/* + * When online repair is not built into the kernel, we still want to attempt + * the repair so that the stub xrep_attempt below will return EOPNOTSUPP. + */ +static inline bool xrep_will_attempt(const struct xfs_scrub *sc) +{ + return (sc->sm->sm_flags & XFS_SCRUB_IFLAG_FORCE_REBUILD) || + xchk_needs_repair(sc->sm); +} static inline int xrep_attempt( diff --git a/fs/xfs/scrub/scrub.c b/fs/xfs/scrub/scrub.c index 950f5a58dcd967..09468f50781b24 100644 --- a/fs/xfs/scrub/scrub.c +++ b/fs/xfs/scrub/scrub.c @@ -149,6 +149,15 @@ xchk_probe( if (xchk_should_terminate(sc, &error)) return error; + /* + * If the caller is probing to see if repair works, set the CORRUPT + * flag (without any of the usual tracing/logging) to force us into + * the repair codepaths. If repair is compiled into the kernel, we'll + * call xrep_probe and simulate a repair; otherwise, the repair + * codepaths return EOPNOTSUPP. + */ + if (xchk_could_repair(sc)) + sc->sm->sm_flags |= XFS_SCRUB_OFLAG_CORRUPT; return 0; }

10 months, 1 week

2
4
0 0

[PATCH v1] usb: dwc3: core: Defer the probe until USB power supply ready

by Kyle Tso

Currently, DWC3 driver attempts to acquire the USB power supply only once during the probe. If the USB power supply is not ready at that time, the driver simply ignores the failure and continues the probe, leading to permanent non-functioning of the gadget vbus_draw callback. Address this problem by delaying the dwc3 driver initialization until the USB power supply is registered. Fixes: 6f0764b5adea ("usb: dwc3: add a power supply for current control") Cc: stable(a)vger.kernel.org Signed-off-by: Kyle Tso <kyletso(a)google.com> --- Note: This is a follow-up of https://lore.kernel.org/all/20240804084612.2561230-1-kyletso@google.com/ --- drivers/usb/dwc3/core.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 7578c5133568..1550c39e792a 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1669,7 +1669,7 @@ static void dwc3_get_software_properties(struct dwc3 *dwc) } } -static void dwc3_get_properties(struct dwc3 *dwc) +static int dwc3_get_properties(struct dwc3 *dwc) { struct device *dev = dwc->dev; u8 lpm_nyet_threshold; @@ -1724,7 +1724,7 @@ static void dwc3_get_properties(struct dwc3 *dwc) if (ret >= 0) { dwc->usb_psy = power_supply_get_by_name(usb_psy_name); if (!dwc->usb_psy) - dev_err(dev, "couldn't get usb power supply\n"); + return dev_err_probe(dev, -EPROBE_DEFER, "couldn't get usb power supply\n"); } dwc->has_lpm_erratum = device_property_read_bool(dev, @@ -1847,6 +1847,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) dwc->imod_interval = 0; dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num; + + return 0; } /* check whether the core supports IMOD */ @@ -2181,7 +2183,9 @@ static int dwc3_probe(struct platform_device *pdev) dwc->regs = regs; dwc->regs_size = resource_size(&dwc_res); - dwc3_get_properties(dwc); + ret = dwc3_get_properties(dwc); + if (ret) + return ret; dwc3_get_software_properties(dwc); -- 2.47.1.688.g23fc6f90ad-goog

10 months, 1 week

2
1
0 0

[PATCH 1/2] alloc_tag: avoid current->alloc_tag manipulations when profiling is disabled

by Suren Baghdasaryan

When memory allocation profiling is disabled there is no need to update current->alloc_tag and these manipulations add unnecessary overhead. Fix the overhead by skipping these extra updates. Fixes: b951aaff5035 ("mm: enable page allocation tagging") Signed-off-by: Suren Baghdasaryan <surenb(a)google.com> Cc: stable(a)vger.kernel.org --- include/linux/alloc_tag.h | 11 ++++++++--- lib/alloc_tag.c | 2 ++ 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/include/linux/alloc_tag.h b/include/linux/alloc_tag.h index 0bbbe537c5f9..a946e0203e6d 100644 --- a/include/linux/alloc_tag.h +++ b/include/linux/alloc_tag.h @@ -224,9 +224,14 @@ static inline void alloc_tag_sub(union codetag_ref *ref, size_t bytes) {} #define alloc_hooks_tag(_tag, _do_alloc) \ ({ \ - struct alloc_tag * __maybe_unused _old = alloc_tag_save(_tag); \ - typeof(_do_alloc) _res = _do_alloc; \ - alloc_tag_restore(_tag, _old); \ + typeof(_do_alloc) _res; \ + if (mem_alloc_profiling_enabled()) { \ + struct alloc_tag * __maybe_unused _old; \ + _old = alloc_tag_save(_tag); \ + _res = _do_alloc; \ + alloc_tag_restore(_tag, _old); \ + } else \ + _res = _do_alloc; \ _res; \ }) diff --git a/lib/alloc_tag.c b/lib/alloc_tag.c index 7dcebf118a3e..4c373f444eb1 100644 --- a/lib/alloc_tag.c +++ b/lib/alloc_tag.c @@ -29,6 +29,8 @@ EXPORT_SYMBOL(_shared_alloc_tag); DEFINE_STATIC_KEY_MAYBE(CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT, mem_alloc_profiling_key); +EXPORT_SYMBOL(mem_alloc_profiling_key); + DEFINE_STATIC_KEY_FALSE(mem_profiling_compressed); struct alloc_tag_kernel_section kernel_tags = { NULL, 0 }; base-commit: 431614f1580a03c1a653340c55ea76bd12a9403f -- 2.47.1.613.gc27f4b7a9f-goog

10 months, 1 week

3
14
0 0

[PATCH] can: ctucanfd: handle skb allocation failure

by Fedor Pchelkin

If skb allocation fails, the pointer to struct can_frame is NULL. This is actually handled everywhere inside ctucan_err_interrupt() except for the only place. Add the missed NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool. Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.") Cc: stable(a)vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin(a)ispras.ru> --- drivers/net/can/ctucanfd/ctucanfd_base.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/ctucanfd/ctucanfd_base.c b/drivers/net/can/ctucanfd/ctucanfd_base.c index 64c349fd4600..f65c1a1e05cc 100644 --- a/drivers/net/can/ctucanfd/ctucanfd_base.c +++ b/drivers/net/can/ctucanfd/ctucanfd_base.c @@ -867,10 +867,12 @@ static void ctucan_err_interrupt(struct net_device *ndev, u32 isr) } break; case CAN_STATE_ERROR_ACTIVE: - cf->can_id |= CAN_ERR_CNT; - cf->data[1] = CAN_ERR_CRTL_ACTIVE; - cf->data[6] = bec.txerr; - cf->data[7] = bec.rxerr; + if (skb) { + cf->can_id |= CAN_ERR_CNT; + cf->data[1] = CAN_ERR_CRTL_ACTIVE; + cf->data[6] = bec.txerr; + cf->data[7] = bec.rxerr; + } break; default: netdev_warn(ndev, "unhandled error state (%d:%s)!\n", -- 2.39.5

10 months, 1 week

3
2
0 0

[PATCH v2] drm/i915/guc: Debug print LRC state entries only if the context is pinned

by Daniele Ceraolo Spurio

After the context is unpinned the backing memory can also be unpinned, so any accesses via the lrc_reg_state pointer can end up in unmapped memory. To avoid that, make sure to only access that memory if the context is pinned when printing its info. v2: fix newline alignment Fixes: 28ff6520a34d ("drm/i915/guc: Update GuC debugfs to support new GuC") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio(a)intel.com> Cc: John Harrison <John.C.Harrison(a)Intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: <stable(a)vger.kernel.org> # v5.15+ Reviewed-by: John Harrison <John.C.Harrison(a)Intel.com> --- .../gpu/drm/i915/gt/uc/intel_guc_submission.c | 20 +++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c index 12f1ba7ca9c1..158f78a0941f 100644 --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c @@ -5519,12 +5519,20 @@ static inline void guc_log_context(struct drm_printer *p, { drm_printf(p, "GuC lrc descriptor %u:\n", ce->guc_id.id); drm_printf(p, "\tHW Context Desc: 0x%08x\n", ce->lrc.lrca); - drm_printf(p, "\t\tLRC Head: Internal %u, Memory %u\n", - ce->ring->head, - ce->lrc_reg_state[CTX_RING_HEAD]); - drm_printf(p, "\t\tLRC Tail: Internal %u, Memory %u\n", - ce->ring->tail, - ce->lrc_reg_state[CTX_RING_TAIL]); + if (intel_context_pin_if_active(ce)) { + drm_printf(p, "\t\tLRC Head: Internal %u, Memory %u\n", + ce->ring->head, + ce->lrc_reg_state[CTX_RING_HEAD]); + drm_printf(p, "\t\tLRC Tail: Internal %u, Memory %u\n", + ce->ring->tail, + ce->lrc_reg_state[CTX_RING_TAIL]); + intel_context_unpin(ce); + } else { + drm_printf(p, "\t\tLRC Head: Internal %u, Memory not pinned\n", + ce->ring->head); + drm_printf(p, "\t\tLRC Tail: Internal %u, Memory not pinned\n", + ce->ring->tail); + } drm_printf(p, "\t\tContext Pin Count: %u\n", atomic_read(&ce->pin_count)); drm_printf(p, "\t\tGuC ID Ref Count: %u\n", -- 2.43.0

10 months, 1 week

1
0
0 0

[PATCH v3] usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs

by Krishna Kurapati

It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list. Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800 Lecroy shows one byte coming in extra confirming that the byte is coming in from PC: Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722) According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize. Cc: <stable(a)vger.kernel.org> Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") Signed-off-by: Krishna Kurapati <quic_kriskura(a)quicinc.com> --- Link to v2: https://lore.kernel.org/all/20240131150332.1326523-1-quic_kriskura@quicinc.… Changes in v2: Added check to see if the padded byte is 0x00. Changes in v3: Removed wMaxPacketSize check from v2. drivers/usb/gadget/function/f_ncm.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index ca5d5f564998..e2a059cfda2c 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -1338,7 +1338,15 @@ static int ncm_unwrap_ntb(struct gether *port, "Parsed NTB with %d frames\n", dgram_counter); to_process -= block_len; - if (to_process != 0) { + + /* + * Windows NCM driver avoids USB ZLPs by adding a 1-byte + * zero pad as needed. + */ + if (to_process == 1 && + (*(unsigned char *)(ntb_ptr + block_len) == 0x00)) { + to_process--; + } else if (to_process > 0) { ntb_ptr = (unsigned char *)(ntb_ptr + block_len); goto parse_ntb; } -- 2.34.1

10 months, 1 week

3
9
0 0

[PATCH net 0/3] mptcp: fixes for connect selftest flakes

by Matthieu Baerts (NGI0)

Last week, Jakub reported [1] that the MPTCP Connect selftest was unstable. It looked like it started after the introduction of some fixes [2]. After analysis from Paolo, these patches revealed existing bugs, that should be fixed by the following patches. - Patch 1: Make sure ACK are sent when MPTCP-level window re-opens. In some corner cases, the other peer was not notified when more data could be sent. A fix for v5.11, but depending on a feature introduced in v5.19. - Patch 2: Fix spurious wake-up under memory pressure. In this situation, the userspace could be invited to read data not being there yet. A fix for v6.7. - Patch 3: Fix a false positive error when running the MPTCP Connect selftest with the "disconnect" cases. The userspace could disconnect the socket too soon, which would reset (MP_FASTCLOSE) the connection, interpreted as an error by the test. A fix for v5.17. Link: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org [1] Link: https://lore.kernel.org/20241230-net-mptcp-rbuf-fixes-v1-0-8608af434ceb@ker… [2] Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Paolo Abeni (3): mptcp: be sure to send ack when mptcp-level window re-opens mptcp: fix spurious wake-up on under memory pressure selftests: mptcp: avoid spurious errors on disconnect net/mptcp/options.c | 6 ++-- net/mptcp/protocol.h | 9 +++-- tools/testing/selftests/net/mptcp/mptcp_connect.c | 43 +++++++++++++++++------ 3 files changed, 43 insertions(+), 15 deletions(-) --- base-commit: 76201b5979768500bca362871db66d77cb4c225e change-id: 20250113-net-mptcp-connect-st-flakes-4af6389808de Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

10 months, 1 week

2
4
0 0

[PATCH v2] scsi: ufs: fix use-after free in init error and remove paths

by André Draszik

devm_blk_crypto_profile_init() registers a cleanup handler to run when the associated (platform-) device is being released. For UFS, the crypto private data and pointers are stored as part of the ufs_hba's data structure 'struct ufs_hba::crypto_profile'. This structure is allocated as part of the underlying ufshd allocation. During driver release or during error handling in ufshcd_pltfrm_init(), this structure is released as part of ufshcd_dealloc_host() before the (platform-) device associated with the crypto call above is released. Once this device is released, the crypto cleanup code will run, using the just-released 'struct ufs_hba::crypto_profile'. This causes a use-after-free situation: exynos-ufshc 14700000.ufs: ufshcd_pltfrm_init() failed -11 exynos-ufshc 14700000.ufs: probe with driver exynos-ufshc failed with error -11 Unable to handle kernel paging request at virtual address 01adafad6dadad88 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [01adafad6dadad88] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.13.0-rc5-next-20250106+ #70 Tainted: [W]=WARN Hardware name: Oriole (DT) pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kfree+0x60/0x2d8 lr : kvfree+0x44/0x60 sp : ffff80008009ba80 x29: ffff80008009ba90 x28: 0000000000000000 x27: ffffbcc6591e0130 x26: ffffbcc659309960 x25: ffffbcc658f89c50 x24: ffffbcc659539d80 x23: ffff22e000940040 x22: ffff22e001539010 x21: ffffbcc65714b22c x20: 6b6b6b6b6b6b6b6b x19: 01adafad6dadad80 x18: 0000000000000000 x17: ffffbcc6579fbac8 x16: ffffbcc657a04300 x15: ffffbcc657a027f4 x14: ffffbcc656f969cc x13: ffffbcc6579fdc80 x12: ffffbcc6579fb194 x11: ffffbcc6579fbc34 x10: 0000000000000000 x9 : ffffbcc65714b22c x8 : ffff80008009b880 x7 : 0000000000000000 x6 : ffff80008009b940 x5 : ffff80008009b8c0 x4 : ffff22e000940518 x3 : ffff22e006f54f40 x2 : ffffbcc657a02268 x1 : ffff80007fffffff x0 : ffffc1ffc0000000 Call trace: kfree+0x60/0x2d8 (P) kvfree+0x44/0x60 blk_crypto_profile_destroy_callback+0x28/0x70 devm_action_release+0x1c/0x30 release_nodes+0x6c/0x108 devres_release_all+0x98/0x100 device_unbind_cleanup+0x20/0x70 really_probe+0x218/0x2d0 In other words, the initialisation code flow is: platform-device probe ufshcd_pltfrm_init() ufshcd_alloc_host() scsi_host_alloc() allocation of struct ufs_hba creation of scsi-host devices devm_blk_crypto_profile_init() devm registration of cleanup handler using platform-device and during error handling of ufshcd_pltfrm_init() or during driver removal: ufshcd_dealloc_host() scsi_host_put() put_device(scsi-host) release of struct ufs_hba put_device(platform-device) crypto cleanup handler To fix this use-after free, change ufshcd_alloc_host() to register a devres action to automatically cleanup the underlying SCSI device on ufshcd destruction, without requiring explicit calls to ufshcd_dealloc_host(). This way: * the crypto profile and all other ufs_hba-owned resources are destroyed before SCSI (as they've been registered after) * a memleak is plugged in tc-dwc-g210-pci.c as a side-effect * EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as it's not needed anymore * no future drivers using ufshcd_alloc_host() could ever forget adding the cleanup Fixes: cb77cb5abe1f ("blk-crypto: rename blk_keyslot_manager to blk_crypto_profile") Fixes: d76d9d7d1009 ("scsi: ufs: use devm_blk_ksm_init()") Cc: stable(a)vger.kernel.org Signed-off-by: André Draszik <andre.draszik(a)linaro.org> --- Changes in v2: - completely new approach using devres action for Scsi_host cleanup, to ensure ordering - add Fixes: and CC: stable tags (Eric) - Link to v1: https://lore.kernel.org/r/20250113-ufshcd-fix-v1-1-ca63d1d4bd55@linaro.org --- In my case, as per above trace I initially encountered an error in ufshcd_verify_dev_init(), which made me notice this problem. For reproducing, it'd be possible to change that function to just return an error. Other approaches for solving this issue I see are the following, but I believe this one here is the cleanest: * turn 'struct ufs_hba::crypto_profile' into a dynamically allocated pointer, in which case it doesn't matter if cleanup runs after scsi_host_put() * add an explicit devm_blk_crypto_profile_deinit() to be called by API users when necessary, e.g. before ufshcd_dealloc_host() in this case * register the crypto cleanup handler against the scsi-host device instead, like in v1 of this patch --- drivers/ufs/core/ufshcd.c | 27 +++++++++++++++++---------- drivers/ufs/host/ufshcd-pci.c | 2 -- drivers/ufs/host/ufshcd-pltfrm.c | 11 ++++------- include/ufs/ufshcd.h | 1 - 4 files changed, 21 insertions(+), 20 deletions(-) diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 43ddae7318cb..84089f3f62b0 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -10279,16 +10279,6 @@ int ufshcd_system_thaw(struct device *dev) EXPORT_SYMBOL_GPL(ufshcd_system_thaw); #endif /* CONFIG_PM_SLEEP */ -/** - * ufshcd_dealloc_host - deallocate Host Bus Adapter (HBA) - * @hba: pointer to Host Bus Adapter (HBA) - */ -void ufshcd_dealloc_host(struct ufs_hba *hba) -{ - scsi_host_put(hba->host); -} -EXPORT_SYMBOL_GPL(ufshcd_dealloc_host); - /** * ufshcd_set_dma_mask - Set dma mask based on the controller * addressing capability @@ -10307,6 +10297,16 @@ static int ufshcd_set_dma_mask(struct ufs_hba *hba) return dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(32)); } +/** + * ufshcd_scsi_host_put_callback - deallocate underlying Scsi_Host and + * thereby the Host Bus Adapter (HBA) + * @host: pointer to SCSI host + */ +static void ufshcd_scsi_host_put_callback(void *host) +{ + scsi_host_put(host); +} + /** * ufshcd_alloc_host - allocate Host Bus Adapter (HBA) * @dev: pointer to device handle @@ -10334,6 +10334,13 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) err = -ENOMEM; goto out_error; } + + err = devm_add_action_or_reset(dev, ufshcd_scsi_host_put_callback, + host); + if (err) + return dev_err_probe(dev, err, + "failed to add ufshcd dealloc action\n"); + host->nr_maps = HCTX_TYPE_POLL + 1; hba = shost_priv(host); hba->host = host; diff --git a/drivers/ufs/host/ufshcd-pci.c b/drivers/ufs/host/ufshcd-pci.c index ea39c5d5b8cf..9cfcaad23cf9 100644 --- a/drivers/ufs/host/ufshcd-pci.c +++ b/drivers/ufs/host/ufshcd-pci.c @@ -562,7 +562,6 @@ static void ufshcd_pci_remove(struct pci_dev *pdev) pm_runtime_forbid(&pdev->dev); pm_runtime_get_noresume(&pdev->dev); ufshcd_remove(hba); - ufshcd_dealloc_host(hba); } /** @@ -605,7 +604,6 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) err = ufshcd_init(hba, mmio_base, pdev->irq); if (err) { dev_err(&pdev->dev, "Initialization failed\n"); - ufshcd_dealloc_host(hba); return err; } diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c index 505572d4fa87..adb0a65d9df5 100644 --- a/drivers/ufs/host/ufshcd-pltfrm.c +++ b/drivers/ufs/host/ufshcd-pltfrm.c @@ -488,13 +488,13 @@ int ufshcd_pltfrm_init(struct platform_device *pdev, if (err) { dev_err(dev, "%s: clock parse failed %d\n", __func__, err); - goto dealloc_host; + goto out; } err = ufshcd_parse_regulator_info(hba); if (err) { dev_err(dev, "%s: regulator init failed %d\n", __func__, err); - goto dealloc_host; + goto out; } ufshcd_init_lanes_per_dir(hba); @@ -502,14 +502,14 @@ int ufshcd_pltfrm_init(struct platform_device *pdev, err = ufshcd_parse_operating_points(hba); if (err) { dev_err(dev, "%s: OPP parse failed %d\n", __func__, err); - goto dealloc_host; + goto out; } err = ufshcd_init(hba, mmio_base, irq); if (err) { dev_err_probe(dev, err, "Initialization failed with error %d\n", err); - goto dealloc_host; + goto out; } pm_runtime_set_active(dev); @@ -517,8 +517,6 @@ int ufshcd_pltfrm_init(struct platform_device *pdev, return 0; -dealloc_host: - ufshcd_dealloc_host(hba); out: return err; } @@ -534,7 +532,6 @@ void ufshcd_pltfrm_remove(struct platform_device *pdev) pm_runtime_get_sync(&pdev->dev); ufshcd_remove(hba); - ufshcd_dealloc_host(hba); pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); } diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h index da0fa5c65081..58eb6e897827 100644 --- a/include/ufs/ufshcd.h +++ b/include/ufs/ufshcd.h @@ -1311,7 +1311,6 @@ static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg) void ufshcd_enable_irq(struct ufs_hba *hba); void ufshcd_disable_irq(struct ufs_hba *hba); int ufshcd_alloc_host(struct device *, struct ufs_hba **); -void ufshcd_dealloc_host(struct ufs_hba *); int ufshcd_hba_enable(struct ufs_hba *hba); int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int); int ufshcd_link_recovery(struct ufs_hba *hba); --- base-commit: 4e16367cfe0ce395f29d0482b78970cce8e1db73 change-id: 20250113-ufshcd-fix-52409f2d32ff Best regards, -- André Draszik <andre.draszik(a)linaro.org>

10 months, 1 week

2
4
0 0

[PATCH v5 0/2] riscv/ptrace: add new regset to access original a0 register

by Celeste Liu

The orig_a0 is missing in struct user_regs_struct of riscv, and there is no way to add it without breaking UAPI. (See Link tag below) Like NT_ARM_SYSTEM_CALL do, we add a new regset name NT_RISCV_ORIG_A0 to access original a0 register from userspace via ptrace API. Link: https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/ Signed-off-by: Celeste Liu <uwu(a)coelacanthus.name> --- Changes in v5: - Fix wrong usage in selftests. - Link to v4: https://lore.kernel.org/r/20241226-riscv-new-regset-v4-0-4496a29d0436@coela… Changes in v4: - Fix a copy paste error in selftest. (Forget to commit...) - Link to v3: https://lore.kernel.org/r/20241226-riscv-new-regset-v3-0-f5b96465826b@coela… Changes in v3: - Use return 0 directly for readability. - Fix test for modify a0. - Add Fixes: tag - Remove useless Cc: stable. - Selftest will check both a0 and orig_a0, but depends on the correctness of PTRACE_GET_SYSCALL_INFO. - Link to v2: https://lore.kernel.org/r/20241203-riscv-new-regset-v2-0-d37da8c0cba6@coela… Changes in v2: - Fix integer width. - Add selftest. - Link to v1: https://lore.kernel.org/r/20241201-riscv-new-regset-v1-1-c83c58abcc7b@coela… --- Celeste Liu (2): riscv/ptrace: add new regset to access original a0 register riscv: selftests: Add a ptrace test to verify a0 and orig_a0 access arch/riscv/kernel/ptrace.c | 32 +++++ include/uapi/linux/elf.h | 1 + tools/testing/selftests/riscv/abi/.gitignore | 1 + tools/testing/selftests/riscv/abi/Makefile | 6 +- tools/testing/selftests/riscv/abi/ptrace.c | 201 +++++++++++++++++++++++++++ 5 files changed, 240 insertions(+), 1 deletion(-) --- base-commit: 0e287d31b62bb53ad81d5e59778384a40f8b6f56 change-id: 20241201-riscv-new-regset-d529b952ad0d Best regards, -- Celeste Liu <uwu(a)coelacanthus.name>

10 months, 1 week

1
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror