- Linux-stable-mirror - lists.linaro.org

FAILED: patch "[PATCH] xfs: don't over-report free space or inodes in statvfs" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 4b8d867ca6e2fc6d152f629fdaf027053b81765a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025020416-garter-syndrome-36bf@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 4b8d867ca6e2fc6d152f629fdaf027053b81765a Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" <djwong(a)kernel.org> Date: Thu, 12 Dec 2024 14:37:56 -0800 Subject: [PATCH] xfs: don't over-report free space or inodes in statvfs Emmanual Florac reports a strange occurrence when project quota limits are enabled, free space is lower than the remaining quota, and someone runs statvfs: # mkfs.xfs -f /dev/sda # mount /dev/sda /mnt -o prjquota # xfs_quota -x -c 'limit -p bhard=2G 55' /mnt # mkdir /mnt/dir # xfs_io -c 'chproj 55' -c 'chattr +P' -c 'stat -vvvv' /mnt/dir # fallocate -l 19g /mnt/a # df /mnt /mnt/dir Filesystem Size Used Avail Use% Mounted on /dev/sda 20G 20G 345M 99% /mnt /dev/sda 2.0G 0 2.0G 0% /mnt I think the bug here is that xfs_fill_statvfs_from_dquot unconditionally assigns to f_bfree without checking that the filesystem has enough free space to fill the remaining project quota. However, this is a longstanding behavior of xfs so it's unclear what to do here. Cc: <stable(a)vger.kernel.org> # v2.6.18 Fixes: 932f2c323196c2 ("[XFS] statvfs component of directory/project quota support, code originally by Glen.") Reported-by: Emmanuel Florac <eflorac(a)intellique.com> Signed-off-by: "Darrick J. Wong" <djwong(a)kernel.org> Reviewed-by: Christoph Hellwig <hch(a)lst.de> diff --git a/fs/xfs/xfs_qm_bhv.c b/fs/xfs/xfs_qm_bhv.c index 847ba29630e9..db5b8afd9d1b 100644 --- a/fs/xfs/xfs_qm_bhv.c +++ b/fs/xfs/xfs_qm_bhv.c @@ -32,21 +32,28 @@ xfs_fill_statvfs_from_dquot( limit = blkres->softlimit ? blkres->softlimit : blkres->hardlimit; - if (limit && statp->f_blocks > limit) { - statp->f_blocks = limit; - statp->f_bfree = statp->f_bavail = - (statp->f_blocks > blkres->reserved) ? - (statp->f_blocks - blkres->reserved) : 0; + if (limit) { + uint64_t remaining = 0; + + if (limit > blkres->reserved) + remaining = limit - blkres->reserved; + + statp->f_blocks = min(statp->f_blocks, limit); + statp->f_bfree = min(statp->f_bfree, remaining); + statp->f_bavail = min(statp->f_bavail, remaining); } limit = dqp->q_ino.softlimit ? dqp->q_ino.softlimit : dqp->q_ino.hardlimit; - if (limit && statp->f_files > limit) { - statp->f_files = limit; - statp->f_ffree = - (statp->f_files > dqp->q_ino.reserved) ? - (statp->f_files - dqp->q_ino.reserved) : 0; + if (limit) { + uint64_t remaining = 0; + + if (limit > dqp->q_ino.reserved) + remaining = limit - dqp->q_ino.reserved; + + statp->f_files = min(statp->f_files, limit); + statp->f_ffree = min(statp->f_ffree, remaining); } }

3 weeks, 2 days

1
0
0 0

FAILED: patch "[PATCH] xfs: don't over-report free space or inodes in statvfs" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 4b8d867ca6e2fc6d152f629fdaf027053b81765a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025020410-rogue-unusual-e7f8@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 4b8d867ca6e2fc6d152f629fdaf027053b81765a Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" <djwong(a)kernel.org> Date: Thu, 12 Dec 2024 14:37:56 -0800 Subject: [PATCH] xfs: don't over-report free space or inodes in statvfs Emmanual Florac reports a strange occurrence when project quota limits are enabled, free space is lower than the remaining quota, and someone runs statvfs: # mkfs.xfs -f /dev/sda # mount /dev/sda /mnt -o prjquota # xfs_quota -x -c 'limit -p bhard=2G 55' /mnt # mkdir /mnt/dir # xfs_io -c 'chproj 55' -c 'chattr +P' -c 'stat -vvvv' /mnt/dir # fallocate -l 19g /mnt/a # df /mnt /mnt/dir Filesystem Size Used Avail Use% Mounted on /dev/sda 20G 20G 345M 99% /mnt /dev/sda 2.0G 0 2.0G 0% /mnt I think the bug here is that xfs_fill_statvfs_from_dquot unconditionally assigns to f_bfree without checking that the filesystem has enough free space to fill the remaining project quota. However, this is a longstanding behavior of xfs so it's unclear what to do here. Cc: <stable(a)vger.kernel.org> # v2.6.18 Fixes: 932f2c323196c2 ("[XFS] statvfs component of directory/project quota support, code originally by Glen.") Reported-by: Emmanuel Florac <eflorac(a)intellique.com> Signed-off-by: "Darrick J. Wong" <djwong(a)kernel.org> Reviewed-by: Christoph Hellwig <hch(a)lst.de> diff --git a/fs/xfs/xfs_qm_bhv.c b/fs/xfs/xfs_qm_bhv.c index 847ba29630e9..db5b8afd9d1b 100644 --- a/fs/xfs/xfs_qm_bhv.c +++ b/fs/xfs/xfs_qm_bhv.c @@ -32,21 +32,28 @@ xfs_fill_statvfs_from_dquot( limit = blkres->softlimit ? blkres->softlimit : blkres->hardlimit; - if (limit && statp->f_blocks > limit) { - statp->f_blocks = limit; - statp->f_bfree = statp->f_bavail = - (statp->f_blocks > blkres->reserved) ? - (statp->f_blocks - blkres->reserved) : 0; + if (limit) { + uint64_t remaining = 0; + + if (limit > blkres->reserved) + remaining = limit - blkres->reserved; + + statp->f_blocks = min(statp->f_blocks, limit); + statp->f_bfree = min(statp->f_bfree, remaining); + statp->f_bavail = min(statp->f_bavail, remaining); } limit = dqp->q_ino.softlimit ? dqp->q_ino.softlimit : dqp->q_ino.hardlimit; - if (limit && statp->f_files > limit) { - statp->f_files = limit; - statp->f_ffree = - (statp->f_files > dqp->q_ino.reserved) ? - (statp->f_files - dqp->q_ino.reserved) : 0; + if (limit) { + uint64_t remaining = 0; + + if (limit > dqp->q_ino.reserved) + remaining = limit - dqp->q_ino.reserved; + + statp->f_files = min(statp->f_files, limit); + statp->f_ffree = min(statp->f_ffree, remaining); } }

3 weeks, 2 days

1
0
0 0

FAILED: patch "[PATCH] xfs: don't over-report free space or inodes in statvfs" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 4b8d867ca6e2fc6d152f629fdaf027053b81765a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025020409-refurbish-stereo-db71@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 4b8d867ca6e2fc6d152f629fdaf027053b81765a Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" <djwong(a)kernel.org> Date: Thu, 12 Dec 2024 14:37:56 -0800 Subject: [PATCH] xfs: don't over-report free space or inodes in statvfs Emmanual Florac reports a strange occurrence when project quota limits are enabled, free space is lower than the remaining quota, and someone runs statvfs: # mkfs.xfs -f /dev/sda # mount /dev/sda /mnt -o prjquota # xfs_quota -x -c 'limit -p bhard=2G 55' /mnt # mkdir /mnt/dir # xfs_io -c 'chproj 55' -c 'chattr +P' -c 'stat -vvvv' /mnt/dir # fallocate -l 19g /mnt/a # df /mnt /mnt/dir Filesystem Size Used Avail Use% Mounted on /dev/sda 20G 20G 345M 99% /mnt /dev/sda 2.0G 0 2.0G 0% /mnt I think the bug here is that xfs_fill_statvfs_from_dquot unconditionally assigns to f_bfree without checking that the filesystem has enough free space to fill the remaining project quota. However, this is a longstanding behavior of xfs so it's unclear what to do here. Cc: <stable(a)vger.kernel.org> # v2.6.18 Fixes: 932f2c323196c2 ("[XFS] statvfs component of directory/project quota support, code originally by Glen.") Reported-by: Emmanuel Florac <eflorac(a)intellique.com> Signed-off-by: "Darrick J. Wong" <djwong(a)kernel.org> Reviewed-by: Christoph Hellwig <hch(a)lst.de> diff --git a/fs/xfs/xfs_qm_bhv.c b/fs/xfs/xfs_qm_bhv.c index 847ba29630e9..db5b8afd9d1b 100644 --- a/fs/xfs/xfs_qm_bhv.c +++ b/fs/xfs/xfs_qm_bhv.c @@ -32,21 +32,28 @@ xfs_fill_statvfs_from_dquot( limit = blkres->softlimit ? blkres->softlimit : blkres->hardlimit; - if (limit && statp->f_blocks > limit) { - statp->f_blocks = limit; - statp->f_bfree = statp->f_bavail = - (statp->f_blocks > blkres->reserved) ? - (statp->f_blocks - blkres->reserved) : 0; + if (limit) { + uint64_t remaining = 0; + + if (limit > blkres->reserved) + remaining = limit - blkres->reserved; + + statp->f_blocks = min(statp->f_blocks, limit); + statp->f_bfree = min(statp->f_bfree, remaining); + statp->f_bavail = min(statp->f_bavail, remaining); } limit = dqp->q_ino.softlimit ? dqp->q_ino.softlimit : dqp->q_ino.hardlimit; - if (limit && statp->f_files > limit) { - statp->f_files = limit; - statp->f_ffree = - (statp->f_files > dqp->q_ino.reserved) ? - (statp->f_files - dqp->q_ino.reserved) : 0; + if (limit) { + uint64_t remaining = 0; + + if (limit > dqp->q_ino.reserved) + remaining = limit - dqp->q_ino.reserved; + + statp->f_files = min(statp->f_files, limit); + statp->f_ffree = min(statp->f_ffree, remaining); } }

3 weeks, 2 days

1
0
0 0

FAILED: patch "[PATCH] xfs: don't over-report free space or inodes in statvfs" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 4b8d867ca6e2fc6d152f629fdaf027053b81765a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025020409-duckbill-unbalance-60e9@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 4b8d867ca6e2fc6d152f629fdaf027053b81765a Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" <djwong(a)kernel.org> Date: Thu, 12 Dec 2024 14:37:56 -0800 Subject: [PATCH] xfs: don't over-report free space or inodes in statvfs Emmanual Florac reports a strange occurrence when project quota limits are enabled, free space is lower than the remaining quota, and someone runs statvfs: # mkfs.xfs -f /dev/sda # mount /dev/sda /mnt -o prjquota # xfs_quota -x -c 'limit -p bhard=2G 55' /mnt # mkdir /mnt/dir # xfs_io -c 'chproj 55' -c 'chattr +P' -c 'stat -vvvv' /mnt/dir # fallocate -l 19g /mnt/a # df /mnt /mnt/dir Filesystem Size Used Avail Use% Mounted on /dev/sda 20G 20G 345M 99% /mnt /dev/sda 2.0G 0 2.0G 0% /mnt I think the bug here is that xfs_fill_statvfs_from_dquot unconditionally assigns to f_bfree without checking that the filesystem has enough free space to fill the remaining project quota. However, this is a longstanding behavior of xfs so it's unclear what to do here. Cc: <stable(a)vger.kernel.org> # v2.6.18 Fixes: 932f2c323196c2 ("[XFS] statvfs component of directory/project quota support, code originally by Glen.") Reported-by: Emmanuel Florac <eflorac(a)intellique.com> Signed-off-by: "Darrick J. Wong" <djwong(a)kernel.org> Reviewed-by: Christoph Hellwig <hch(a)lst.de> diff --git a/fs/xfs/xfs_qm_bhv.c b/fs/xfs/xfs_qm_bhv.c index 847ba29630e9..db5b8afd9d1b 100644 --- a/fs/xfs/xfs_qm_bhv.c +++ b/fs/xfs/xfs_qm_bhv.c @@ -32,21 +32,28 @@ xfs_fill_statvfs_from_dquot( limit = blkres->softlimit ? blkres->softlimit : blkres->hardlimit; - if (limit && statp->f_blocks > limit) { - statp->f_blocks = limit; - statp->f_bfree = statp->f_bavail = - (statp->f_blocks > blkres->reserved) ? - (statp->f_blocks - blkres->reserved) : 0; + if (limit) { + uint64_t remaining = 0; + + if (limit > blkres->reserved) + remaining = limit - blkres->reserved; + + statp->f_blocks = min(statp->f_blocks, limit); + statp->f_bfree = min(statp->f_bfree, remaining); + statp->f_bavail = min(statp->f_bavail, remaining); } limit = dqp->q_ino.softlimit ? dqp->q_ino.softlimit : dqp->q_ino.hardlimit; - if (limit && statp->f_files > limit) { - statp->f_files = limit; - statp->f_ffree = - (statp->f_files > dqp->q_ino.reserved) ? - (statp->f_files - dqp->q_ino.reserved) : 0; + if (limit) { + uint64_t remaining = 0; + + if (limit > dqp->q_ino.reserved) + remaining = limit - dqp->q_ino.reserved; + + statp->f_files = min(statp->f_files, limit); + statp->f_ffree = min(statp->f_ffree, remaining); } }

3 weeks, 2 days

1
0
0 0

FAILED: patch "[PATCH] xfs: fix mount hang during primary superblock recovery" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x efebe42d95fbba91dca6e3e32cb9e0612eb56de5 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025020458-showoff-enclosure-b449@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From efebe42d95fbba91dca6e3e32cb9e0612eb56de5 Mon Sep 17 00:00:00 2001 From: Long Li <leo.lilong(a)huawei.com> Date: Sat, 11 Jan 2025 15:05:44 +0800 Subject: [PATCH] xfs: fix mount hang during primary superblock recovery failure When mounting an image containing a log with sb modifications that require log replay, the mount process hang all the time and stack as follows: [root@localhost ~]# cat /proc/557/stack [<0>] xfs_buftarg_wait+0x31/0x70 [<0>] xfs_buftarg_drain+0x54/0x350 [<0>] xfs_mountfs+0x66e/0xe80 [<0>] xfs_fs_fill_super+0x7f1/0xec0 [<0>] get_tree_bdev_flags+0x186/0x280 [<0>] get_tree_bdev+0x18/0x30 [<0>] xfs_fs_get_tree+0x1d/0x30 [<0>] vfs_get_tree+0x2d/0x110 [<0>] path_mount+0xb59/0xfc0 [<0>] do_mount+0x92/0xc0 [<0>] __x64_sys_mount+0xc2/0x160 [<0>] x64_sys_call+0x2de4/0x45c0 [<0>] do_syscall_64+0xa7/0x240 [<0>] entry_SYSCALL_64_after_hwframe+0x76/0x7e During log recovery, while updating the in-memory superblock from the primary SB buffer, if an error is encountered, such as superblock corruption occurs or some other reasons, we will proceed to out_release and release the xfs_buf. However, this is insufficient because the xfs_buf's log item has already been initialized and the xfs_buf is held by the buffer log item as follows, the xfs_buf will not be released, causing the mount thread to hang. xlog_recover_do_primary_sb_buffer xlog_recover_do_reg_buffer xlog_recover_validate_buf_type xfs_buf_item_init(bp, mp) The solution is straightforward, we simply need to allow it to be handled by the normal buffer write process. The filesystem will be shutdown before the submission of buffer_list in xlog_do_recovery_pass(), ensuring the correct release of the xfs_buf as follows: xlog_do_recovery_pass error = xlog_recover_process xlog_recover_process_data xlog_recover_process_ophdr xlog_recovery_process_trans ... xlog_recover_buf_commit_pass2 error = xlog_recover_do_primary_sb_buffer //Encounter error and return if (error) goto out_writebuf ... out_writebuf: xfs_buf_delwri_queue(bp, buffer_list) //add bp to list return error ... if (!list_empty(&buffer_list)) if (error) xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); //shutdown first xfs_buf_delwri_submit(&buffer_list); //submit buffers in list __xfs_buf_submit if (bp->b_mount->m_log && xlog_is_shutdown(bp->b_mount->m_log)) xfs_buf_ioend_fail(bp) //release bp correctly Fixes: 6a18765b54e2 ("xfs: update the file system geometry after recoverying superblock buffers") Cc: stable(a)vger.kernel.org # v6.12 Signed-off-by: Long Li <leo.lilong(a)huawei.com> Reviewed-by: Darrick J. Wong <djwong(a)kernel.org> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Carlos Maiolino <cem(a)kernel.org> diff --git a/fs/xfs/xfs_buf_item_recover.c b/fs/xfs/xfs_buf_item_recover.c index b05d5b81f642..05a2f6927c12 100644 --- a/fs/xfs/xfs_buf_item_recover.c +++ b/fs/xfs/xfs_buf_item_recover.c @@ -1087,7 +1087,7 @@ xlog_recover_buf_commit_pass2( error = xlog_recover_do_primary_sb_buffer(mp, item, bp, buf_f, current_lsn); if (error) - goto out_release; + goto out_writebuf; /* Update the rt superblock if we have one. */ if (xfs_has_rtsb(mp) && mp->m_rtsb_bp) { @@ -1104,6 +1104,15 @@ xlog_recover_buf_commit_pass2( xlog_recover_do_reg_buffer(mp, item, bp, buf_f, current_lsn); } + /* + * Buffer held by buf log item during 'normal' buffer recovery must + * be committed through buffer I/O submission path to ensure proper + * release. When error occurs during sb buffer recovery, log shutdown + * will be done before submitting buffer list so that buffers can be + * released correctly through ioend failure path. + */ +out_writebuf: + /* * Perform delayed write on the buffer. Asynchronous writes will be * slower when taking into account all the buffers to be flushed.

3 weeks, 2 days

1
0
0 0

FAILED: patch "[PATCH] xfs: check for dead buffers in xfs_buf_find_insert" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 07eae0fa67ca4bbb199ad85645e0f9dfaef931cd # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025020447-mastiff-cauterize-c488@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 07eae0fa67ca4bbb199ad85645e0f9dfaef931cd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig <hch(a)lst.de> Date: Thu, 16 Jan 2025 07:01:41 +0100 Subject: [PATCH] xfs: check for dead buffers in xfs_buf_find_insert Commit 32dd4f9c506b ("xfs: remove a superflous hash lookup when inserting new buffers") converted xfs_buf_find_insert to use rhashtable_lookup_get_insert_fast and thus an operation that returns the existing buffer when an insert would duplicate the hash key. But this code path misses the check for a buffer with a reference count of zero, which could lead to reusing an about to be freed buffer. Fix this by using the same atomic_inc_not_zero pattern as xfs_buf_insert. Fixes: 32dd4f9c506b ("xfs: remove a superflous hash lookup when inserting new buffers") Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Dave Chinner <dchinner(a)redhat.com> Reviewed-by: Darrick J. Wong <djwong(a)kernel.org> Cc: stable(a)vger.kernel.org # v6.0 Signed-off-by: Carlos Maiolino <cem(a)kernel.org> diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index d9636bff16ce..183428fbc607 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -655,9 +655,8 @@ xfs_buf_find_insert( spin_unlock(&bch->bc_lock); goto out_free_buf; } - if (bp) { + if (bp && atomic_inc_not_zero(&bp->b_hold)) { /* found an existing buffer */ - atomic_inc(&bp->b_hold); spin_unlock(&bch->bc_lock); error = xfs_buf_find_lock(bp, flags); if (error)

3 weeks, 2 days

1
0
0 0

FAILED: patch "[PATCH] xfs: check for dead buffers in xfs_buf_find_insert" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 07eae0fa67ca4bbb199ad85645e0f9dfaef931cd # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025020447-stinking-untying-4604@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 07eae0fa67ca4bbb199ad85645e0f9dfaef931cd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig <hch(a)lst.de> Date: Thu, 16 Jan 2025 07:01:41 +0100 Subject: [PATCH] xfs: check for dead buffers in xfs_buf_find_insert Commit 32dd4f9c506b ("xfs: remove a superflous hash lookup when inserting new buffers") converted xfs_buf_find_insert to use rhashtable_lookup_get_insert_fast and thus an operation that returns the existing buffer when an insert would duplicate the hash key. But this code path misses the check for a buffer with a reference count of zero, which could lead to reusing an about to be freed buffer. Fix this by using the same atomic_inc_not_zero pattern as xfs_buf_insert. Fixes: 32dd4f9c506b ("xfs: remove a superflous hash lookup when inserting new buffers") Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Dave Chinner <dchinner(a)redhat.com> Reviewed-by: Darrick J. Wong <djwong(a)kernel.org> Cc: stable(a)vger.kernel.org # v6.0 Signed-off-by: Carlos Maiolino <cem(a)kernel.org> diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index d9636bff16ce..183428fbc607 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -655,9 +655,8 @@ xfs_buf_find_insert( spin_unlock(&bch->bc_lock); goto out_free_buf; } - if (bp) { + if (bp && atomic_inc_not_zero(&bp->b_hold)) { /* found an existing buffer */ - atomic_inc(&bp->b_hold); spin_unlock(&bch->bc_lock); error = xfs_buf_find_lock(bp, flags); if (error)

3 weeks, 2 days

1
0
0 0

[PATCH v2] usb: gadget: f_midi: Fixing wMaxPacketSize exceeded issue during MIDI bind retries

by Selvarasu Ganesan

The current implementation sets the wMaxPacketSize of bulk in/out endpoints to 1024 bytes at the end of the f_midi_bind function. However, in cases where there is a failure in the first midi bind attempt, consider rebinding. This scenario may encounter an f_midi_bind issue due to the previous bind setting the bulk endpoint's wMaxPacketSize to 1024 bytes, which exceeds the ep->maxpacket_limit where configured dwc3 TX/RX FIFO's maxpacket size of 512 bytes for IN/OUT endpoints in support HS speed only. Here the term "rebind" in this context refers to attempting to bind the MIDI function a second time in certain scenarios. The situations where rebinding is considered include: * When there is a failure in the first UDC write attempt, which may be caused by other functions bind along with MIDI. * Runtime composition change : Example : MIDI,ADB to MIDI. Or MIDI to MIDI,ADB. This commit addresses this issue by resetting the wMaxPacketSize before endpoint claim. And here there is no need to reset all values in the usb endpoint descriptor structure, as all members except wMaxPacketSize and bEndpointAddress have predefined values. This ensures that restores the endpoint to its expected configuration, and preventing conflicts with value of ep->maxpacket_limit. It also aligns with the approach used in other function drivers, which treat endpoint descriptors as if they were full speed before endpoint claim. Fixes: 46decc82ffd5 ("usb: gadget: unconditionally allocate hs/ss descriptor in bind operation") Cc: stable(a)vger.kernel.org Signed-off-by: Selvarasu Ganesan <selvarasu.g(a)samsung.com> --- Changes in v2: - Expanded changelog as per the comment from Greg KH. - Link to v1: https://lore.kernel.org/all/20241208152322.1653-1-selvarasu.g@samsung.com/ --- drivers/usb/gadget/function/f_midi.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 837fcdfa3840..9b991cf5b0f8 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -907,6 +907,15 @@ static int f_midi_bind(struct usb_configuration *c, struct usb_function *f) status = -ENODEV; + /* + * Reset wMaxPacketSize with maximum packet size of FS bulk transfer before + * endpoint claim. This ensures that the wMaxPacketSize does not exceed the + * limit during bind retries where configured dwc3 TX/RX FIFO's maxpacket + * size of 512 bytes for IN/OUT endpoints in support HS speed only. + */ + bulk_in_desc.wMaxPacketSize = cpu_to_le16(64); + bulk_out_desc.wMaxPacketSize = cpu_to_le16(64); + /* allocate instance-specific endpoints */ midi->in_ep = usb_ep_autoconfig(cdev->gadget, &bulk_in_desc); if (!midi->in_ep) -- 2.17.1

3 weeks, 2 days

2
1
0 0

[PATCH 6.1] nvme: fix metadata handling in nvme-passthrough

by Hagar Hemdan

From: Puranjay Mohan <pjy(a)amazon.com> [ Upstream commit 7c2fd76048e95dd267055b5f5e0a48e6e7c81fd9 ] On an NVMe namespace that does not support metadata, it is possible to send an IO command with metadata through io-passthru. This allows issues like [1] to trigger in the completion code path. nvme_map_user_request() doesn't check if the namespace supports metadata before sending it forward. It also allows admin commands with metadata to be processed as it ignores metadata when bdev == NULL and may report success. Reject an IO command with metadata when the NVMe namespace doesn't support it and reject an admin command if it has metadata. [1] https://lore.kernel.org/all/mb61pcylvnym8.fsf@amazon.com/ Suggested-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Sagi Grimberg <sagi(a)grimberg.me> Reviewed-by: Anuj Gupta <anuj20.g(a)samsung.com> Signed-off-by: Keith Busch <kbusch(a)kernel.org> [ Minor changes to make it work on 6.1 ] Signed-off-by: Puranjay Mohan <pjy(a)amazon.com> Signed-off-by: Hagar Hemdan <hagarhem(a)amazon.com> --- Resend as all stables contain the fix except 6.1. --- drivers/nvme/host/ioctl.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c index 875dee6ecd40..19a7f0160618 100644 --- a/drivers/nvme/host/ioctl.c +++ b/drivers/nvme/host/ioctl.c @@ -3,6 +3,7 @@ * Copyright (c) 2011-2014, Intel Corporation. * Copyright (c) 2017-2021 Christoph Hellwig. */ +#include <linux/blk-integrity.h> #include <linux/ptrace.h> /* for force_successful_syscall_return */ #include <linux/nvme_ioctl.h> #include <linux/io_uring.h> @@ -171,10 +172,15 @@ static int nvme_map_user_request(struct request *req, u64 ubuffer, struct request_queue *q = req->q; struct nvme_ns *ns = q->queuedata; struct block_device *bdev = ns ? ns->disk->part0 : NULL; + bool supports_metadata = bdev && blk_get_integrity(bdev->bd_disk); + bool has_metadata = meta_buffer && meta_len; struct bio *bio = NULL; void *meta = NULL; int ret; + if (has_metadata && !supports_metadata) + return -EINVAL; + if (ioucmd && (ioucmd->flags & IORING_URING_CMD_FIXED)) { struct iov_iter iter; @@ -198,7 +204,7 @@ static int nvme_map_user_request(struct request *req, u64 ubuffer, if (bdev) bio_set_dev(bio, bdev); - if (bdev && meta_buffer && meta_len) { + if (has_metadata) { meta = nvme_add_user_metadata(req, meta_buffer, meta_len, meta_seed); if (IS_ERR(meta)) { -- 2.40.1

3 weeks, 2 days

3
2
0 0

[PATCH v2] kbuild: switch from lz4c to lz4 for compression

by Parth Pancholi

From: Parth Pancholi <parth.pancholi(a)toradex.com> Replace lz4c with lz4 for kernel image compression. Although lz4 and lz4c are functionally similar, lz4c has been deprecated upstream since 2018. Since as early as Ubuntu 16.04 and Fedora 25, lz4 and lz4c have been packaged together, making it safe to update the requirement from lz4c to lz4. Consequently, some distributions and build systems, such as OpenEmbedded, have fully transitioned to using lz4. OpenEmbedded core adopted this change in commit fe167e082cbd ("bitbake.conf: require lz4 instead of lz4c"), causing compatibility issues when building the mainline kernel in the latest OpenEmbedded environment, as seen in the errors below. This change also updates the LZ4 compression commands to make it backward compatible by replacing stdin and stdout with the '-' option, due to some unclear reason, the stdout keyword does not work for lz4 and '-' works for both. In addition, this modifies the legacy '-c1' with '-9' which is also compatible with both. This fixes the mainline kernel build failures with the latest master OpenEmbedded builds associated with the mentioned compatibility issues. LZ4 arch/arm/boot/compressed/piggy_data /bin/sh: 1: lz4c: not found ... ... ERROR: oe_runmake failed Cc: stable(a)vger.kernel.org Link: https://github.com/lz4/lz4/pull/553 Suggested-by: Francesco Dolcini <francesco.dolcini(a)toradex.com> Signed-off-by: Parth Pancholi <parth.pancholi(a)toradex.com> --- v2: correct the compression command line to make it compatible with lz4 v1: https://lore.kernel.org/all/20241112150006.265900-1-parth105105@gmail.com/ --- Makefile | 2 +- scripts/Makefile.lib | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Makefile b/Makefile index 79192a3024bf..7630f763f5b2 100644 --- a/Makefile +++ b/Makefile @@ -508,7 +508,7 @@ KGZIP = gzip KBZIP2 = bzip2 KLZOP = lzop LZMA = lzma -LZ4 = lz4c +LZ4 = lz4 XZ = xz ZSTD = zstd diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 01a9f567d5af..fe5e132fcea8 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -371,10 +371,10 @@ quiet_cmd_lzo_with_size = LZO $@ cmd_lzo_with_size = { cat $(real-prereqs) | $(KLZOP) -9; $(size_append); } > $@ quiet_cmd_lz4 = LZ4 $@ - cmd_lz4 = cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout > $@ + cmd_lz4 = cat $(real-prereqs) | $(LZ4) -l -9 - - > $@ quiet_cmd_lz4_with_size = LZ4 $@ - cmd_lz4_with_size = { cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout; \ + cmd_lz4_with_size = { cat $(real-prereqs) | $(LZ4) -l -9 - -; \ $(size_append); } > $@ # U-Boot mkimage -- 2.34.1

3 weeks, 2 days

6
9
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror