- Linux-stable-mirror - lists.linaro.org

[PATCH 1/1] arm64: dts: qcom: x1e80100: Fix up BAR space size for PCIe6a

by Qiang Yu

As per memory map table, the region for PCIe6a is 64MByte. Hence, set the size of 32 bit non-prefetchable memory region beginning on address 0x70300000 as 0x3d00000 so that BAR space assigned to BAR registers can be allocated from 0x70300000 to 0x74000000. Fixes: 7af141850012 ("arm64: dts: qcom: x1e80100: Fix up BAR spaces") Cc: stable(a)vger.kernel.org Signed-off-by: Qiang Yu <quic_qianyu(a)quicinc.com> --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index f044921457d0..90ddac606719 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -3126,7 +3126,7 @@ pcie6a: pci@1bf8000 { #address-cells = <3>; #size-cells = <2>; ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>, - <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x1d00000>; + <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>; bus-range = <0x00 0xff>; dma-coherent; -- 2.34.1

1 year

3
2
0 0

[PATCH v2 1/2] soc: qcom: pmic_glink: fix scope of __pmic_glink_lock in pmic_glink_rpmsg_probe()

by Krzysztof Kozlowski

File-scope "__pmic_glink_lock" mutex protects the filke-scope "__pmic_glink", thus reference to it should be obtained under the lock, just like pmic_glink_rpmsg_remove() is doing. Otherwise we have a race during if PMIC GLINK device removal: the pmic_glink_rpmsg_probe() function could store local reference before mutex in driver removal is acquired. Fixes: 58ef4ece1e41 ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Changes in v2: 1. None --- drivers/soc/qcom/pmic_glink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c index 9606222993fd..452f30a9354d 100644 --- a/drivers/soc/qcom/pmic_glink.c +++ b/drivers/soc/qcom/pmic_glink.c @@ -217,10 +217,11 @@ static void pmic_glink_pdr_callback(int state, char *svc_path, void *priv) static int pmic_glink_rpmsg_probe(struct rpmsg_device *rpdev) { - struct pmic_glink *pg = __pmic_glink; + struct pmic_glink *pg; int ret = 0; mutex_lock(&__pmic_glink_lock); + pg = __pmic_glink; if (!pg) { ret = dev_err_probe(&rpdev->dev, -ENODEV, "no pmic_glink device to attach to\n"); goto out_unlock; -- 2.43.0

1 year

2
1
0 0

Re: [RFC PATCH] epoll: Add synchronous wakeup support for ep_poll_callback

by Brian Geffon

On Wed, Oct 16, 2024 at 03:10:34PM +0200, Christian Brauner wrote: > On Fri, 26 Apr 2024 16:05:48 +0800, Xuewen Yan wrote: > > Now, the epoll only use wake_up() interface to wake up task. > > However, sometimes, there are epoll users which want to use > > the synchronous wakeup flag to hint the scheduler, such as > > Android binder driver. > > So add a wake_up_sync() define, and use the wake_up_sync() > > when the sync is true in ep_poll_callback(). > > > > [...] > > Applied to the vfs.misc branch of the vfs/vfs.git tree. > Patches in the vfs.misc branch should appear in linux-next soon. > > Please report any outstanding bugs that were missed during review in a > new review to the original patch series allowing us to drop it. > > It's encouraged to provide Acked-bys and Reviewed-bys even though the > patch has now been applied. If possible patch trailers will be updated. > > Note that commit hashes shown below are subject to change due to rebase, > trailer updates or similar. If in doubt, please check the listed branch. > > tree: https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs.git > branch: vfs.misc This is a bug that's been present for all of time, so I think we should: Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable(a)vger.kernel.org I sent a patch which adds a benchmark for nonblocking pipes using epoll: https://lore.kernel.org/lkml/20241016190009.866615-1-bgeffon@google.com/ Using this new benchmark I get the following results without this fix and with this fix: $ tools/perf/perf bench sched pipe -n # Running 'sched/pipe' benchmark: # Executed 1000000 pipe operations between two processes Total time: 12.194 [sec] 12.194376 usecs/op 82005 ops/sec $ tools/perf/perf bench sched pipe -n # Running 'sched/pipe' benchmark: # Executed 1000000 pipe operations between two processes Total time: 9.229 [sec] 9.229738 usecs/op 108345 ops/sec > > [1/1] epoll: Add synchronous wakeup support for ep_poll_callback > https://git.kernel.org/vfs/vfs/c/2ce0e17660a7

1 year

2
4
0 0

[for-linus v2][PATCH 1/2] fgraph: Still initialize idle shadow stacks when starting

by Steven Rostedt

From: Steven Rostedt <rostedt(a)goodmis.org> A bug was discovered where the idle shadow stacks were not initialized for offline CPUs when starting function graph tracer, and when they came online they were not traced due to the missing shadow stack. To fix this, the idle task shadow stack initialization was moved to using the CPU hotplug callbacks. But it removed the initialization when the function graph was enabled. The problem here is that the hotplug callbacks are called when the CPUs come online, but the idle shadow stack initialization only happens if function graph is currently active. This caused the online CPUs to not get their shadow stack initialized. The idle shadow stack initialization still needs to be done when the function graph is registered, as they will not be allocated if function graph is not registered. Cc: stable(a)vger.kernel.org Cc: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Link: https://lore.kernel.org/20241211135335.094ba282@batman.local.home Fixes: 2c02f7375e65 ("fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks") Reported-by: Linus Walleij <linus.walleij(a)linaro.org> Tested-by: Linus Walleij <linus.walleij(a)linaro.org> Closes: https://lore.kernel.org/all/CACRpkdaTBrHwRbbrphVy-=SeDz6MSsXhTKypOtLrTQ+DgG… Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- kernel/trace/fgraph.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/trace/fgraph.c b/kernel/trace/fgraph.c index 0bf78517b5d4..ddedcb50917f 100644 --- a/kernel/trace/fgraph.c +++ b/kernel/trace/fgraph.c @@ -1215,7 +1215,7 @@ void fgraph_update_pid_func(void) static int start_graph_tracing(void) { unsigned long **ret_stack_list; - int ret; + int ret, cpu; ret_stack_list = kcalloc(FTRACE_RETSTACK_ALLOC_SIZE, sizeof(*ret_stack_list), GFP_KERNEL); @@ -1223,6 +1223,12 @@ static int start_graph_tracing(void) if (!ret_stack_list) return -ENOMEM; + /* The cpu_boot init_task->ret_stack will never be freed */ + for_each_online_cpu(cpu) { + if (!idle_task(cpu)->ret_stack) + ftrace_graph_init_idle_task(idle_task(cpu), cpu); + } + do { ret = alloc_retstack_tasklist(ret_stack_list); } while (ret == -EAGAIN); -- 2.45.2

1 year

1
0
0 0

[PATCH v2] RDMA/srp: Fix error handling in srp_add_port

by Ma Ke

Once device_add() failed, we should call only put_device() to decrement reference count for cleanup. We should not call device_del() before put_device(). As comment of device_add() says, 'if device_add() succeeds, you should call device_del() when you want to get rid of it. If device_add() has not succeeded, use only put_device() to drop the reference count'. Found by code review. Cc: stable(a)vger.kernel.org Fixes: c8e4c2397655 ("RDMA/srp: Rework the srp_add_port() error path") Signed-off-by: Ma Ke <make_ruc2021(a)163.com> --- Changes in v2: - modified the bug description as suggestions. --- drivers/infiniband/ulp/srp/ib_srp.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 2916e77f589b..7289ae0b83ac 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -3978,7 +3978,6 @@ static struct srp_host *srp_add_port(struct srp_device *device, u32 port) return host; put_host: - device_del(&host->dev); put_device(&host->dev); return NULL; } -- 2.25.1

1 year

2
1
0 0

[PATCH] usb: fix reference leak in usb_new_device()

by Ma Ke

When device_add(&udev->dev) failed, calling put_device() to explicitly release udev->dev. Otherwise, it could cause double free problem. Found by code review. Cc: stable(a)vger.kernel.org Fixes: 9f8b17e643fe ("USB: make usbdevices export their device nodes instead of using a separate class") Signed-off-by: Ma Ke <make_ruc2021(a)163.com> --- drivers/usb/core/hub.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4b93c0bd1d4b..05b778d2ad63 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2651,6 +2651,7 @@ int usb_new_device(struct usb_device *udev) err = device_add(&udev->dev); if (err) { dev_err(&udev->dev, "can't device_add, error %d\n", err); + put_device(&udev->dev); goto fail; } @@ -2683,6 +2684,9 @@ int usb_new_device(struct usb_device *udev) pm_runtime_put_sync_autosuspend(&udev->dev); return err; +out_del_dev: + device_del(&udev->dev); + put_device(&udev->dev); fail: usb_set_device_state(udev, USB_STATE_NOTATTACHED); pm_runtime_disable(&udev->dev); -- 2.25.1

1 year

3
2
0 0

FAILED: patch "[PATCH] ALSA: usb-audio: Fix a DMA to stack memory bug" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x f7d306b47a24367302bd4fe846854e07752ffcd9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024121040-distant-throng-b534@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f7d306b47a24367302bd4fe846854e07752ffcd9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)linaro.org> Date: Mon, 2 Dec 2024 15:57:54 +0300 Subject: [PATCH] ALSA: usb-audio: Fix a DMA to stack memory bug The usb_get_descriptor() function does DMA so we're not allowed to use a stack buffer for that. Doing DMA to the stack is not portable all architectures. Move the "new_device_descriptor" from being stored on the stack and allocate it with kmalloc() instead. Fixes: b909df18ce2a ("ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices") Cc: stable(a)kernel.org Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Link: https://patch.msgid.link/60e3aa09-039d-46d2-934c-6f123026c2eb@stanley.mount… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 8bc959b60be3..7c9d352864da 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -555,7 +555,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip, static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf) { struct usb_host_config *config = dev->actconfig; - struct usb_device_descriptor new_device_descriptor; + struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL; int err; if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD || @@ -566,15 +566,19 @@ static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interfac 0x10, 0x43, 0x0001, 0x000a, NULL, 0); if (err < 0) dev_dbg(&dev->dev, "error sending boot message: %d\n", err); + + new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL); + if (!new_device_descriptor) + return -ENOMEM; err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, - &new_device_descriptor, sizeof(new_device_descriptor)); + new_device_descriptor, sizeof(*new_device_descriptor)); if (err < 0) dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); - if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations) + if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations) dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n", - new_device_descriptor.bNumConfigurations); + new_device_descriptor->bNumConfigurations); else - memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor)); + memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor)); err = usb_reset_configuration(dev); if (err < 0) dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); @@ -906,7 +910,7 @@ static void mbox2_setup_48_24_magic(struct usb_device *dev) static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) { struct usb_host_config *config = dev->actconfig; - struct usb_device_descriptor new_device_descriptor; + struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL; int err; u8 bootresponse[0x12]; int fwsize; @@ -941,15 +945,19 @@ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) dev_dbg(&dev->dev, "device initialised!\n"); + new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL); + if (!new_device_descriptor) + return -ENOMEM; + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, - &new_device_descriptor, sizeof(new_device_descriptor)); + new_device_descriptor, sizeof(*new_device_descriptor)); if (err < 0) dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); - if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations) + if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations) dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n", - new_device_descriptor.bNumConfigurations); + new_device_descriptor->bNumConfigurations); else - memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor)); + memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor)); err = usb_reset_configuration(dev); if (err < 0) @@ -1259,7 +1267,7 @@ static void mbox3_setup_defaults(struct usb_device *dev) static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) { struct usb_host_config *config = dev->actconfig; - struct usb_device_descriptor new_device_descriptor; + struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL; int err; int descriptor_size; @@ -1272,15 +1280,19 @@ static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) dev_dbg(&dev->dev, "MBOX3: device initialised!\n"); + new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL); + if (!new_device_descriptor) + return -ENOMEM; + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, - &new_device_descriptor, sizeof(new_device_descriptor)); + new_device_descriptor, sizeof(*new_device_descriptor)); if (err < 0) dev_dbg(&dev->dev, "MBOX3: error usb_get_descriptor: %d\n", err); - if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations) + if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations) dev_dbg(&dev->dev, "MBOX3: error too large bNumConfigurations: %d\n", - new_device_descriptor.bNumConfigurations); + new_device_descriptor->bNumConfigurations); else - memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor)); + memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor)); err = usb_reset_configuration(dev); if (err < 0)

1 year

4
8
0 0

FAILED: patch "[PATCH] ALSA: usb-audio: Fix a DMA to stack memory bug" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x f7d306b47a24367302bd4fe846854e07752ffcd9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024121041-unread-utilize-cae6@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f7d306b47a24367302bd4fe846854e07752ffcd9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)linaro.org> Date: Mon, 2 Dec 2024 15:57:54 +0300 Subject: [PATCH] ALSA: usb-audio: Fix a DMA to stack memory bug The usb_get_descriptor() function does DMA so we're not allowed to use a stack buffer for that. Doing DMA to the stack is not portable all architectures. Move the "new_device_descriptor" from being stored on the stack and allocate it with kmalloc() instead. Fixes: b909df18ce2a ("ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices") Cc: stable(a)kernel.org Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Link: https://patch.msgid.link/60e3aa09-039d-46d2-934c-6f123026c2eb@stanley.mount… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 8bc959b60be3..7c9d352864da 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -555,7 +555,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip, static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf) { struct usb_host_config *config = dev->actconfig; - struct usb_device_descriptor new_device_descriptor; + struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL; int err; if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD || @@ -566,15 +566,19 @@ static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interfac 0x10, 0x43, 0x0001, 0x000a, NULL, 0); if (err < 0) dev_dbg(&dev->dev, "error sending boot message: %d\n", err); + + new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL); + if (!new_device_descriptor) + return -ENOMEM; err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, - &new_device_descriptor, sizeof(new_device_descriptor)); + new_device_descriptor, sizeof(*new_device_descriptor)); if (err < 0) dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); - if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations) + if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations) dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n", - new_device_descriptor.bNumConfigurations); + new_device_descriptor->bNumConfigurations); else - memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor)); + memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor)); err = usb_reset_configuration(dev); if (err < 0) dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); @@ -906,7 +910,7 @@ static void mbox2_setup_48_24_magic(struct usb_device *dev) static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) { struct usb_host_config *config = dev->actconfig; - struct usb_device_descriptor new_device_descriptor; + struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL; int err; u8 bootresponse[0x12]; int fwsize; @@ -941,15 +945,19 @@ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) dev_dbg(&dev->dev, "device initialised!\n"); + new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL); + if (!new_device_descriptor) + return -ENOMEM; + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, - &new_device_descriptor, sizeof(new_device_descriptor)); + new_device_descriptor, sizeof(*new_device_descriptor)); if (err < 0) dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); - if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations) + if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations) dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n", - new_device_descriptor.bNumConfigurations); + new_device_descriptor->bNumConfigurations); else - memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor)); + memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor)); err = usb_reset_configuration(dev); if (err < 0) @@ -1259,7 +1267,7 @@ static void mbox3_setup_defaults(struct usb_device *dev) static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) { struct usb_host_config *config = dev->actconfig; - struct usb_device_descriptor new_device_descriptor; + struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL; int err; int descriptor_size; @@ -1272,15 +1280,19 @@ static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) dev_dbg(&dev->dev, "MBOX3: device initialised!\n"); + new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL); + if (!new_device_descriptor) + return -ENOMEM; + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, - &new_device_descriptor, sizeof(new_device_descriptor)); + new_device_descriptor, sizeof(*new_device_descriptor)); if (err < 0) dev_dbg(&dev->dev, "MBOX3: error usb_get_descriptor: %d\n", err); - if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations) + if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations) dev_dbg(&dev->dev, "MBOX3: error too large bNumConfigurations: %d\n", - new_device_descriptor.bNumConfigurations); + new_device_descriptor->bNumConfigurations); else - memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor)); + memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor)); err = usb_reset_configuration(dev); if (err < 0)

1 year

3
2
0 0

FAILED: patch "[PATCH] ALSA: usb-audio: Fix a DMA to stack memory bug" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x f7d306b47a24367302bd4fe846854e07752ffcd9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024121041-floss-compactor-3b56@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f7d306b47a24367302bd4fe846854e07752ffcd9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)linaro.org> Date: Mon, 2 Dec 2024 15:57:54 +0300 Subject: [PATCH] ALSA: usb-audio: Fix a DMA to stack memory bug The usb_get_descriptor() function does DMA so we're not allowed to use a stack buffer for that. Doing DMA to the stack is not portable all architectures. Move the "new_device_descriptor" from being stored on the stack and allocate it with kmalloc() instead. Fixes: b909df18ce2a ("ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices") Cc: stable(a)kernel.org Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Link: https://patch.msgid.link/60e3aa09-039d-46d2-934c-6f123026c2eb@stanley.mount… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 8bc959b60be3..7c9d352864da 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -555,7 +555,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip, static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf) { struct usb_host_config *config = dev->actconfig; - struct usb_device_descriptor new_device_descriptor; + struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL; int err; if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD || @@ -566,15 +566,19 @@ static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interfac 0x10, 0x43, 0x0001, 0x000a, NULL, 0); if (err < 0) dev_dbg(&dev->dev, "error sending boot message: %d\n", err); + + new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL); + if (!new_device_descriptor) + return -ENOMEM; err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, - &new_device_descriptor, sizeof(new_device_descriptor)); + new_device_descriptor, sizeof(*new_device_descriptor)); if (err < 0) dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); - if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations) + if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations) dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n", - new_device_descriptor.bNumConfigurations); + new_device_descriptor->bNumConfigurations); else - memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor)); + memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor)); err = usb_reset_configuration(dev); if (err < 0) dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); @@ -906,7 +910,7 @@ static void mbox2_setup_48_24_magic(struct usb_device *dev) static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) { struct usb_host_config *config = dev->actconfig; - struct usb_device_descriptor new_device_descriptor; + struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL; int err; u8 bootresponse[0x12]; int fwsize; @@ -941,15 +945,19 @@ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) dev_dbg(&dev->dev, "device initialised!\n"); + new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL); + if (!new_device_descriptor) + return -ENOMEM; + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, - &new_device_descriptor, sizeof(new_device_descriptor)); + new_device_descriptor, sizeof(*new_device_descriptor)); if (err < 0) dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); - if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations) + if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations) dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n", - new_device_descriptor.bNumConfigurations); + new_device_descriptor->bNumConfigurations); else - memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor)); + memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor)); err = usb_reset_configuration(dev); if (err < 0) @@ -1259,7 +1267,7 @@ static void mbox3_setup_defaults(struct usb_device *dev) static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) { struct usb_host_config *config = dev->actconfig; - struct usb_device_descriptor new_device_descriptor; + struct usb_device_descriptor *new_device_descriptor __free(kfree) = NULL; int err; int descriptor_size; @@ -1272,15 +1280,19 @@ static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) dev_dbg(&dev->dev, "MBOX3: device initialised!\n"); + new_device_descriptor = kmalloc(sizeof(*new_device_descriptor), GFP_KERNEL); + if (!new_device_descriptor) + return -ENOMEM; + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, - &new_device_descriptor, sizeof(new_device_descriptor)); + new_device_descriptor, sizeof(*new_device_descriptor)); if (err < 0) dev_dbg(&dev->dev, "MBOX3: error usb_get_descriptor: %d\n", err); - if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations) + if (new_device_descriptor->bNumConfigurations > dev->descriptor.bNumConfigurations) dev_dbg(&dev->dev, "MBOX3: error too large bNumConfigurations: %d\n", - new_device_descriptor.bNumConfigurations); + new_device_descriptor->bNumConfigurations); else - memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor)); + memcpy(&dev->descriptor, new_device_descriptor, sizeof(dev->descriptor)); err = usb_reset_configuration(dev); if (err < 0)

1 year

3
2
0 0

TI Ethernet Driver TI_K3_AM65_CPSW_NUSS

by Da Shi Cao

The driver of TI K3 ethernet port depends on PAGE_POOL configuration option. There should be a select PAGE_POOL under it configuration. --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -114,6 +114,7 @@ config TI_K3_AM65_CPSW_NUSS select TI_DAVINCI_MDIO select PHYLINK select TI_K3_CPPI_DESC_POOL + select PAGE_POOL imply PHY_TI_GMII_SEL depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS help Dashi Cao

1 year

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror