- Linux-stable-mirror - lists.linaro.org

FAILED: patch "[PATCH] ext4: preserve SB_I_VERSION on remount" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x f2326fd14a224e4cccbab89e14c52279ff79b7ec # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082138-barracuda-engorge-cf38@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f2326fd14a224e4cccbab89e14c52279ff79b7ec Mon Sep 17 00:00:00 2001 From: Baokun Li <libaokun1(a)huawei.com> Date: Thu, 3 Jul 2025 15:39:03 +0800 Subject: [PATCH] ext4: preserve SB_I_VERSION on remount IMA testing revealed that after an ext4 remount, file accesses triggered full measurements even without modifications, instead of skipping as expected when i_version is unchanged. Debugging showed `SB_I_VERSION` was cleared in reconfigure_super() during remount due to commit 1ff20307393e ("ext4: unconditionally enable the i_version counter") removing the fix from commit 960e0ab63b2e ("ext4: fix i_version handling on remount"). To rectify this, `SB_I_VERSION` is always set for `fc->sb_flags` in ext4_init_fs_context(), instead of `sb->s_flags` in __ext4_fill_super(), ensuring it persists across all mounts. Cc: stable(a)kernel.org Fixes: 1ff20307393e ("ext4: unconditionally enable the i_version counter") Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Jan Kara <jack(a)suse.cz> Link: https://patch.msgid.link/20250703073903.6952-2-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 9203518786e4..ed1b36bd51c8 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1998,6 +1998,9 @@ int ext4_init_fs_context(struct fs_context *fc) fc->fs_private = ctx; fc->ops = &ext4_context_ops; + /* i_version is always enabled now */ + fc->sb_flags |= SB_I_VERSION; + return 0; } @@ -5316,9 +5319,6 @@ static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb) sb->s_flags = (sb->s_flags & ~SB_POSIXACL) | (test_opt(sb, POSIX_ACL) ? SB_POSIXACL : 0); - /* i_version is always enabled now */ - sb->s_flags |= SB_I_VERSION; - /* HSM events are allowed by default. */ sb->s_iflags |= SB_I_ALLOW_HSM;

4 months

2
1
0 0

[PATCH v2] serial: stm32: allow selecting console when the driver is module

by Raphael Gallais-Pou

Console can be enabled on the UART compile as module. Change dependency to allow console mode when the driver is built as module. Fixes: 48a6092fb41fa ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable(a)vger.kernel.org Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou(a)foss.st.com> --- Changes in v2: - Cced stable tree --- drivers/tty/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index e661f5951f558..1e27a822c1cba 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1420,7 +1420,7 @@ config SERIAL_STM32 config SERIAL_STM32_CONSOLE bool "Support for console on STM32" - depends on SERIAL_STM32=y + depends on SERIAL_STM32 select SERIAL_CORE_CONSOLE select SERIAL_EARLYCON -- 2.25.1

4 months

1
0
0 0

[PATCH 5.15.y 0/2] mptcp: fix recent failed backports (20250822)

by Matthieu Baerts (NGI0)

Greg recently reported the following patches could not be applied without conflicts in this tree: - f5ce0714623c ("mptcp: disable add_addr retransmission when timeout is 0") - 452690be7de2 ("selftests: mptcp: pm: check flush doesn't reset limits") Conflicts have been resolved, and documented in each patch. Geliang Tang (1): mptcp: disable add_addr retransmission when timeout is 0 Matthieu Baerts (NGI0) (1): selftests: mptcp: pm: check flush doesn't reset limits Documentation/networking/mptcp-sysctl.rst | 2 ++ net/mptcp/pm_netlink.c | 13 ++++++++++--- tools/testing/selftests/net/mptcp/pm_netlink.sh | 1 + 3 files changed, 13 insertions(+), 3 deletions(-) -- 2.50.0

4 months

1
2
0 0

FAILED: patch "[PATCH] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x a0b8da04153eb61cc2eaeeea5cc404e91e557f6b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082104-undermost-dispute-929c@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From a0b8da04153eb61cc2eaeeea5cc404e91e557f6b Mon Sep 17 00:00:00 2001 From: Judith Mendez <jm(a)ti.com> Date: Mon, 7 Jul 2025 14:08:30 -0500 Subject: [PATCH] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file This moves pinmux child nodes for sdhci0 node from k3-am62x-sk-common to each top level board file. This is needed since we require internal pullups for AM62x SK and not for AM62 LP SK since it has external pullups on DATA 1-7. Internal pulls are required for AM62 SK as per JESD84 spec recommendation to prevent unconnected lines floating. Fixes: d19a66ae488a ("arm64: dts: ti: k3-am625-sk: Enable on board peripherals") Cc: stable(a)vger.kernel.org Signed-off-by: Judith Mendez <jm(a)ti.com> Link: https://lore.kernel.org/r/20250707190830.3951619-1-jm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr(a)ti.com> diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index aafdb90c0eb7..4609f366006e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -74,6 +74,22 @@ vddshv_sdio: regulator-4 { }; &main_pmx0 { + main_mmc0_pins_default: main-mmc0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (V1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (W2) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (W1) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (Y2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (W3) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (W4) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (V4) MMC0_DAT7 */ + >; + }; + vddshv_sdio_pins_default: vddshv-sdio-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ @@ -144,6 +160,14 @@ exp2: gpio@23 { }; }; +&sdhci0 { + bootph-all; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + status = "okay"; +}; + &sdhci1 { vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vddshv_sdio>; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 2fbfa3719345..d240165bda9c 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -106,6 +106,22 @@ vcc_1v8: regulator-5 { }; &main_pmx0 { + main_mmc0_pins_default: main-mmc0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + main_rgmii2_pins_default: main-rgmii2-default-pins { bootph-all; pinctrl-single,pins = < @@ -195,6 +211,14 @@ exp1: gpio@22 { }; }; +&sdhci0 { + bootph-all; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + status = "okay"; +}; + &sdhci1 { vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vdd_sd_dv>; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index ee8337bfbbfd..13e1d36123d5 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -203,22 +203,6 @@ AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */ >; }; - main_mmc0_pins_default: main-mmc0-default-pins { - bootph-all; - pinctrl-single,pins = < - AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ - AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ - AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */ - AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */ - AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */ - AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */ - AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */ - AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */ - AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */ - AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */ - >; - }; - main_mmc1_pins_default: main-mmc1-default-pins { bootph-all; pinctrl-single,pins = < @@ -457,14 +441,6 @@ &main_i2c2 { clock-frequency = <400000>; }; -&sdhci0 { - bootph-all; - status = "okay"; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; -}; - &sdhci1 { /* SD/MMC */ bootph-all;

4 months

2
4
0 0

FAILED: patch "[PATCH] ext4: preserve SB_I_VERSION on remount" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x f2326fd14a224e4cccbab89e14c52279ff79b7ec # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082138-qualm-causation-5828@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f2326fd14a224e4cccbab89e14c52279ff79b7ec Mon Sep 17 00:00:00 2001 From: Baokun Li <libaokun1(a)huawei.com> Date: Thu, 3 Jul 2025 15:39:03 +0800 Subject: [PATCH] ext4: preserve SB_I_VERSION on remount IMA testing revealed that after an ext4 remount, file accesses triggered full measurements even without modifications, instead of skipping as expected when i_version is unchanged. Debugging showed `SB_I_VERSION` was cleared in reconfigure_super() during remount due to commit 1ff20307393e ("ext4: unconditionally enable the i_version counter") removing the fix from commit 960e0ab63b2e ("ext4: fix i_version handling on remount"). To rectify this, `SB_I_VERSION` is always set for `fc->sb_flags` in ext4_init_fs_context(), instead of `sb->s_flags` in __ext4_fill_super(), ensuring it persists across all mounts. Cc: stable(a)kernel.org Fixes: 1ff20307393e ("ext4: unconditionally enable the i_version counter") Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Jan Kara <jack(a)suse.cz> Link: https://patch.msgid.link/20250703073903.6952-2-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 9203518786e4..ed1b36bd51c8 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1998,6 +1998,9 @@ int ext4_init_fs_context(struct fs_context *fc) fc->fs_private = ctx; fc->ops = &ext4_context_ops; + /* i_version is always enabled now */ + fc->sb_flags |= SB_I_VERSION; + return 0; } @@ -5316,9 +5319,6 @@ static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb) sb->s_flags = (sb->s_flags & ~SB_POSIXACL) | (test_opt(sb, POSIX_ACL) ? SB_POSIXACL : 0); - /* i_version is always enabled now */ - sb->s_flags |= SB_I_VERSION; - /* HSM events are allowed by default. */ sb->s_iflags |= SB_I_ALLOW_HSM;

4 months

2
1
0 0

[PATCH 6.6.y 0/3] mptcp: fix recent failed backports (20250822)

by Matthieu Baerts (NGI0)

Greg recently reported the following patches could not be applied without conflicts in this tree: - 5d13349472ac ("mptcp: remove duplicate sk_reset_timer call") - f5ce0714623c ("mptcp: disable add_addr retransmission when timeout is 0") - 452690be7de2 ("selftests: mptcp: pm: check flush doesn't reset limits") Conflicts have been resolved, and documented in each patch. Geliang Tang (2): mptcp: remove duplicate sk_reset_timer call mptcp: disable add_addr retransmission when timeout is 0 Matthieu Baerts (NGI0) (1): selftests: mptcp: pm: check flush doesn't reset limits Documentation/networking/mptcp-sysctl.rst | 2 ++ net/mptcp/pm_netlink.c | 18 ++++++++++++------ .../testing/selftests/net/mptcp/pm_netlink.sh | 1 + 3 files changed, 15 insertions(+), 6 deletions(-) -- 2.50.0

4 months

1
3
0 0

FAILED: patch "[PATCH] arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 265f70af805f33a0dfc90f50cc0f116f702c3811 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082119-deafness-faster-0127@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 265f70af805f33a0dfc90f50cc0f116f702c3811 Mon Sep 17 00:00:00 2001 From: Judith Mendez <jm(a)ti.com> Date: Mon, 7 Jul 2025 14:12:50 -0500 Subject: [PATCH] arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR support For eMMC, High Speed DDR mode is not supported [0], so remove mmc-ddr-1_8v flag which adds the capability. [0] https://www.ti.com/lit/gpn/am625 Fixes: c37c58fdeb8a ("arm64: dts: ti: k3-am62: Add more peripheral nodes") Cc: stable(a)vger.kernel.org Signed-off-by: Judith Mendez <jm(a)ti.com> Link: https://lore.kernel.org/r/20250707191250.3953990-1-jm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr(a)ti.com> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 9e0b6eee9ac7..120ba8f9dd0e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -553,7 +553,6 @@ sdhci0: mmc@fa10000 { clocks = <&k3_clks 57 5>, <&k3_clks 57 6>; clock-names = "clk_ahb", "clk_xin"; bus-width = <8>; - mmc-ddr-1_8v; mmc-hs200-1_8v; ti,clkbuf-sel = <0x7>; ti,otap-del-sel-legacy = <0x0>;

4 months

2
1
0 0

[PATCH 6.12.y 0/2] mptcp: fix recent failed backports (20250822)

by Matthieu Baerts (NGI0)

Greg recently reported the following patches could not be applied without conflicts in this tree: - 5d13349472ac ("mptcp: remove duplicate sk_reset_timer call") - f5ce0714623c ("mptcp: disable add_addr retransmission when timeout is 0") Conflicts have been resolved, and documented in each patch. Geliang Tang (2): mptcp: remove duplicate sk_reset_timer call mptcp: disable add_addr retransmission when timeout is 0 Documentation/networking/mptcp-sysctl.rst | 2 ++ net/mptcp/pm_netlink.c | 18 ++++++++++++------ 2 files changed, 14 insertions(+), 6 deletions(-) -- 2.50.0

4 months

1
2
0 0

FAILED: patch "[PATCH] mptcp: remove duplicate sk_reset_timer call" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 5d13349472ac8abcbcb94407969aa0fdc2e1f1be # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082231-attempt-trickily-0b68@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5d13349472ac8abcbcb94407969aa0fdc2e1f1be Mon Sep 17 00:00:00 2001 From: Geliang Tang <geliang(a)kernel.org> Date: Fri, 15 Aug 2025 19:28:22 +0200 Subject: [PATCH] mptcp: remove duplicate sk_reset_timer call sk_reset_timer() was called twice in mptcp_pm_alloc_anno_list. Simplify the code by using a 'goto' statement to eliminate the duplication. Note that this is not a fix, but it will help backporting the following patch. The same "Fixes" tag has been added for this reason. Fixes: 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout") Cc: stable(a)vger.kernel.org Signed-off-by: Geliang Tang <tanggeliang(a)kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-4-521fe9… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/mptcp/pm.c b/net/mptcp/pm.c index 420d416e2603..c5f6a53ce5f1 100644 --- a/net/mptcp/pm.c +++ b/net/mptcp/pm.c @@ -353,9 +353,7 @@ bool mptcp_pm_alloc_anno_list(struct mptcp_sock *msk, if (WARN_ON_ONCE(mptcp_pm_is_kernel(msk))) return false; - sk_reset_timer(sk, &add_entry->add_timer, - jiffies + mptcp_get_add_addr_timeout(net)); - return true; + goto reset_timer; } add_entry = kmalloc(sizeof(*add_entry), GFP_ATOMIC); @@ -369,6 +367,7 @@ bool mptcp_pm_alloc_anno_list(struct mptcp_sock *msk, add_entry->retrans_times = 0; timer_setup(&add_entry->add_timer, mptcp_pm_add_timer, 0); +reset_timer: sk_reset_timer(sk, &add_entry->add_timer, jiffies + mptcp_get_add_addr_timeout(net));

4 months

2
1
0 0

FAILED: patch "[PATCH] btrfs: subpage: keep TOWRITE tag until folio is cleaned" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x b1511360c8ac882b0c52caa263620538e8d73220 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025082102-scoff-lasso-16ce@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b1511360c8ac882b0c52caa263620538e8d73220 Mon Sep 17 00:00:00 2001 From: Naohiro Aota <naohiro.aota(a)wdc.com> Date: Thu, 31 Jul 2025 12:46:56 +0900 Subject: [PATCH] btrfs: subpage: keep TOWRITE tag until folio is cleaned btrfs_subpage_set_writeback() calls folio_start_writeback() the first time a folio is written back, and it also clears the PAGECACHE_TAG_TOWRITE tag even if there are still dirty blocks in the folio. This can break ordering guarantees, such as those required by btrfs_wait_ordered_extents(). That ordering breakage leads to a real failure. For example, running generic/464 on a zoned setup will hit the following ASSERT. This happens because the broken ordering fails to flush existing dirty pages before the file size is truncated. assertion failed: !list_empty(&ordered->list) :: 0, in fs/btrfs/zoned.c:1899 ------------[ cut here ]------------ kernel BUG at fs/btrfs/zoned.c:1899! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 1906169 Comm: kworker/u130:2 Kdump: loaded Not tainted 6.16.0-rc6-BTRFS-ZNS+ #554 PREEMPT(voluntary) Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_finish_ordered_zoned.cold+0x50/0x52 [btrfs] RSP: 0018:ffffc9002efdbd60 EFLAGS: 00010246 RAX: 000000000000004c RBX: ffff88811923c4e0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff827e38b1 RDI: 00000000ffffffff RBP: ffff88810005d000 R08: 00000000ffffdfff R09: ffffffff831051c8 R10: ffffffff83055220 R11: 0000000000000000 R12: ffff8881c2458c00 R13: ffff88811923c540 R14: ffff88811923c5e8 R15: ffff8881c1bd9680 FS: 0000000000000000(0000) GS:ffff88a04acd0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f907c7a918c CR3: 0000000004024000 CR4: 0000000000350ef0 Call Trace: <TASK> ? srso_return_thunk+0x5/0x5f btrfs_finish_ordered_io+0x4a/0x60 [btrfs] btrfs_work_helper+0xf9/0x490 [btrfs] process_one_work+0x204/0x590 ? srso_return_thunk+0x5/0x5f worker_thread+0x1d6/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x118/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x205/0x260 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Consider process A calling writepages() with WB_SYNC_NONE. In zoned mode or for compressed writes, it locks several folios for delalloc and starts writing them out. Let's call the last locked folio folio X. Suppose the write range only partially covers folio X, leaving some pages dirty. Process A calls btrfs_subpage_set_writeback() when building a bio. This function call clears the TOWRITE tag of folio X, whose size = 8K and the block size = 4K. It is following state. 0 4K 8K |/////|/////| (flag: DIRTY, tag: DIRTY) <-----> Process A will write this range. Now suppose process B concurrently calls writepages() with WB_SYNC_ALL. It calls tag_pages_for_writeback() to tag dirty folios with PAGECACHE_TAG_TOWRITE. Since folio X is still dirty, it gets tagged. Then, B collects tagged folios using filemap_get_folios_tag() and must wait for folio X to be written before returning from writepages(). 0 4K 8K |/////|/////| (flag: DIRTY, tag: DIRTY|TOWRITE) However, between tagging and collecting, process A may call btrfs_subpage_set_writeback() and clear folio X's TOWRITE tag. 0 4K 8K | |/////| (flag: DIRTY|WRITEBACK, tag: DIRTY) As a result, process B won't see folio X in its batch, and returns without waiting for it. This breaks the WB_SYNC_ALL ordering requirement. Fix this by using btrfs_subpage_set_writeback_keepwrite(), which retains the TOWRITE tag. We now manually clear the tag only after the folio becomes clean, via the xas operation. Fixes: 3470da3b7d87 ("btrfs: subpage: introduce helpers for writeback status") CC: stable(a)vger.kernel.org # 6.12+ Reviewed-by: Qu Wenruo <wqu(a)suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn(a)wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota(a)wdc.com> Signed-off-by: David Sterba <dsterba(a)suse.com> diff --git a/fs/btrfs/subpage.c b/fs/btrfs/subpage.c index c9b3821957f7..cb4f97833dc3 100644 --- a/fs/btrfs/subpage.c +++ b/fs/btrfs/subpage.c @@ -448,8 +448,25 @@ void btrfs_subpage_set_writeback(const struct btrfs_fs_info *fs_info, spin_lock_irqsave(&bfs->lock, flags); bitmap_set(bfs->bitmaps, start_bit, len >> fs_info->sectorsize_bits); + + /* + * Don't clear the TOWRITE tag when starting writeback on a still-dirty + * folio. Doing so can cause WB_SYNC_ALL writepages() to overlook it, + * assume writeback is complete, and exit too early — violating sync + * ordering guarantees. + */ if (!folio_test_writeback(folio)) - folio_start_writeback(folio); + __folio_start_writeback(folio, true); + if (!folio_test_dirty(folio)) { + struct address_space *mapping = folio_mapping(folio); + XA_STATE(xas, &mapping->i_pages, folio->index); + unsigned long flags; + + xas_lock_irqsave(&xas, flags); + xas_load(&xas); + xas_clear_mark(&xas, PAGECACHE_TAG_TOWRITE); + xas_unlock_irqrestore(&xas, flags); + } spin_unlock_irqrestore(&bfs->lock, flags); }

4 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror