The busy timeout that is computed for each erase/trim/discard operation,
can become quite long and may thus exceed the host->max_busy_timeout. If
that becomes the case, mmc_do_erase() converts from using an R1B response
to an R1 response, as to prevent the host from doing HW busy detection.
However, it has turned out that some hosts requires an R1B response no
matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note
that, if the R1B gets enforced, the host becomes fully responsible of
managing the needed busy timeout, in one way or the other.
Suggested-by: Sowjanya Komatineni <skomatineni(a)nvidia.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org>
---
drivers/mmc/core/core.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index aa54d359dab7..a971c4bcc442 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1732,8 +1732,11 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
* the erase operation does not exceed the max_busy_timeout, we should
* use R1B response. Or we need to prevent the host from doing hw busy
* detection, which is done by converting to a R1 response instead.
+ * Note, some hosts requires R1B, which also means they are on their own
+ * when it comes to deal with the busy timeout.
*/
- if (card->host->max_busy_timeout &&
+ if (!(card->host->caps & MMC_CAP_NEED_RSP_BUSY) &&
+ card->host->max_busy_timeout &&
busy_timeout > card->host->max_busy_timeout) {
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
} else {
--
2.20.1
It has turned out that some host controllers can't use R1B for CMD6 and
other commands that have R1B associated with them. Therefore invent a new
host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this.
In __mmc_switch(), let's check the flag and use it to prevent R1B responses
from being converted into R1. Note that, this also means that the host are
on its own, when it comes to manage the busy timeout.
Suggested-by: Sowjanya Komatineni <skomatineni(a)nvidia.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org>
---
drivers/mmc/core/mmc_ops.c | 6 ++++--
include/linux/mmc/host.h | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index da425ee2d9bf..e025604e17d4 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -542,9 +542,11 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
* If the max_busy_timeout of the host is specified, make sure it's
* enough to fit the used timeout_ms. In case it's not, let's instruct
* the host to avoid HW busy detection, by converting to a R1 response
- * instead of a R1B.
+ * instead of a R1B. Note, some hosts requires R1B, which also means
+ * they are on their own when it comes to deal with the busy timeout.
*/
- if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout))
+ if (!(host->caps & MMC_CAP_NEED_RSP_BUSY) && host->max_busy_timeout &&
+ (timeout_ms > host->max_busy_timeout))
use_r1b_resp = false;
cmd.opcode = MMC_SWITCH;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index ba703384bea0..4c5eb3aa8e72 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -333,6 +333,7 @@ struct mmc_host {
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | \
MMC_CAP_UHS_DDR50)
#define MMC_CAP_SYNC_RUNTIME_PM (1 << 21) /* Synced runtime PM suspends. */
+#define MMC_CAP_NEED_RSP_BUSY (1 << 22) /* Commands with R1B can't use R1. */
#define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */
#define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */
#define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */
--
2.20.1
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 242c46c023610dbc0213fc8fb6b71eb836bc5d95 Mon Sep 17 00:00:00 2001
From: Dragos Tarcatu <dragos_tarcatu(a)mentor.com>
Date: Fri, 7 Feb 2020 20:53:25 +0200
Subject: [PATCH] ASoC: topology: Fix memleak in soc_tplg_manifest_load()
In case of ABI version mismatch, _manifest needs to be freed as
it is just a copy of the original topology manifest. However, if
a driver manifest handler is defined, that would get executed and
the cleanup is never reached. Fix that by getting the return status
of manifest() instead of returning directly.
Fixes: 583958fa2e52 ("ASoC: topology: Make manifest backward compatible from ABI v4")
Signed-off-by: Dragos Tarcatu <dragos_tarcatu(a)mentor.com>
Link: https://lore.kernel.org/r/20200207185325.22320-3-dragos_tarcatu@mentor.com
Signed-off-by: Mark Brown <broonie(a)kernel.org>
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 953517a73298..22c38df40d5a 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2544,7 +2544,7 @@ static int soc_tplg_manifest_load(struct soc_tplg *tplg,
{
struct snd_soc_tplg_manifest *manifest, *_manifest;
bool abi_match;
- int err;
+ int ret = 0;
if (tplg->pass != SOC_TPLG_PASS_MANIFEST)
return 0;
@@ -2557,19 +2557,19 @@ static int soc_tplg_manifest_load(struct soc_tplg *tplg,
_manifest = manifest;
} else {
abi_match = false;
- err = manifest_new_ver(tplg, manifest, &_manifest);
- if (err < 0)
- return err;
+ ret = manifest_new_ver(tplg, manifest, &_manifest);
+ if (ret < 0)
+ return ret;
}
/* pass control to component driver for optional further init */
if (tplg->comp && tplg->ops && tplg->ops->manifest)
- return tplg->ops->manifest(tplg->comp, tplg->index, _manifest);
+ ret = tplg->ops->manifest(tplg->comp, tplg->index, _manifest);
if (!abi_match) /* free the duplicated one */
kfree(_manifest);
- return 0;
+ return ret;
}
/* validate header magic, size and type */
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: d907b3e6c735 - ASoC: intel: skl: Fix possible buffer overflow in debug outputs
The results of these automated tests are provided below.
Overall result: FAILED (see details below)
Merge: OK
Compile: OK
Tests: PANICKED
All kernel binaries, config files, and logs are available for download here:
https://cki-artifacts.s3.us-east-2.amazonaws.com/index.html?prefix=dataware…
One or more kernel tests failed:
s390x:
💥 LTP
ppc64le:
❌ audit: audit testsuite test
aarch64:
❌ audit: audit testsuite test
x86_64:
❌ audit: audit testsuite test
We hope that these logs can help you find the problem quickly. For the full
detail on our testing procedures, please scroll to the bottom of this message.
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ lvm thinp sanity
✅ storage: software RAID testing
🚧 ✅ Storage blktests
Host 2:
✅ Boot test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking MACsec: sanity
✅ Networking socket: fuzz
✅ Networking sctp-auth: sockopts test
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
❌ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ tuned: tune-processes-through-perf
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
✅ trace: ftrace/tracer
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - DaCapo Benchmark Suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ LTP: openposix test suite
🚧 ✅ Networking vnic: ipvlan/basic
🚧 ✅ iotop: sanity
🚧 ✅ Usex - version 1.9-29
🚧 ✅ storage: dm/common
ppc64le:
Host 1:
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ lvm thinp sanity
✅ storage: software RAID testing
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
Host 2:
✅ Boot test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking MACsec: sanity
✅ Networking socket: fuzz
✅ Networking sctp-auth: sockopts test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - tunnel
❌ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ tuned: tune-processes-through-perf
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ trace: ftrace/tracer
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - DaCapo Benchmark Suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ LTP: openposix test suite
🚧 ✅ Networking vnic: ipvlan/basic
🚧 ✅ iotop: sanity
🚧 ✅ Usex - version 1.9-29
🚧 ✅ storage: dm/common
s390x:
Host 1:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ stress: stress-ng
🚧 ✅ Storage blktests
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ Podman system integration test - as root
⚡⚡⚡ Podman system integration test - as user
💥 LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Ethernet drivers sanity
⚡⚡⚡ Networking MACsec: sanity
⚡⚡⚡ Networking sctp-auth: sockopts test
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - transport
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ audit: audit testsuite test
⚡⚡⚡ httpd: mod_ssl smoke sanity
⚡⚡⚡ tuned: tune-processes-through-perf
⚡⚡⚡ trace: ftrace/tracer
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ jvm - DaCapo Benchmark Suite
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ LTP: openposix test suite
🚧 ⚡⚡⚡ Networking vnic: ipvlan/basic
🚧 ⚡⚡⚡ iotop: sanity
🚧 ⚡⚡⚡ Usex - version 1.9-29
🚧 ⚡⚡⚡ storage: dm/common
x86_64:
Host 1:
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ lvm thinp sanity
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ IOMMU boot test
🚧 ✅ Storage blktests
Host 2:
✅ Boot test
✅ Storage SAN device stress - mpt3sas driver
Host 3:
✅ Boot test
✅ Storage SAN device stress - megaraid_sas
Host 4:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking MACsec: sanity
✅ Networking socket: fuzz
✅ Networking sctp-auth: sockopts test
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
❌ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ tuned: tune-processes-through-perf
✅ pciutils: sanity smoke test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
⚡⚡⚡ trace: ftrace/tracer
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ jvm - DaCapo Benchmark Suite
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ LTP: openposix test suite
🚧 ⚡⚡⚡ Networking vnic: ipvlan/basic
🚧 ⚡⚡⚡ iotop: sanity
🚧 ⚡⚡⚡ Usex - version 1.9-29
🚧 ⚡⚡⚡ storage: dm/common
Test sources: https://github.com/CKI-project/tests-beaker
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.