- Linux-stable-mirror - lists.linaro.org

FAILED: patch "[PATCH] spi: atmel-qspi: Memory barriers after memory-mapped I/O" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x be92ab2de0ee1a13291c3b47b2d7eb24d80c0a2c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021000-onslaught-gumming-8c6b@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From be92ab2de0ee1a13291c3b47b2d7eb24d80c0a2c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bence=20Cs=C3=B3k=C3=A1s?= <csokas.bence(a)prolan.hu> Date: Thu, 19 Dec 2024 10:12:58 +0100 Subject: [PATCH] spi: atmel-qspi: Memory barriers after memory-mapped I/O MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The QSPI peripheral control and status registers are accessible via the SoC's APB bus, whereas MMIO transactions' data travels on the AHB bus. Microchip documentation and even sample code from Atmel emphasises the need for a memory barrier before the first MMIO transaction to the AHB-connected QSPI, and before the last write to its registers via APB. This is achieved by the following lines in `atmel_qspi_transfer()`: /* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */ (void)atmel_qspi_read(aq, QSPI_IFR); However, the current documentation makes no mention to synchronization requirements in the other direction, i.e. after the last data written via AHB, and before the first register access on APB. In our case, we were facing an issue where the QSPI peripheral would cease to send any new CSR (nCS Rise) interrupts, leading to a timeout in `atmel_qspi_wait_for_completion()` and ultimately this panic in higher levels: ubi0 error: ubi_io_write: error -110 while writing 63108 bytes to PEB 491:128, written 63104 bytes After months of extensive research of the codebase, fiddling around the debugger with kgdb, and back-and-forth with Microchip, we came to the conclusion that the issue is probably that the peripheral is still busy receiving on AHB when the LASTXFER bit is written to its Control Register on APB, therefore this write gets lost, and the peripheral still thinks there is more data to come in the MMIO transfer. This was first formulated when we noticed that doubling the write() of QSPI_CR_LASTXFER seemed to solve the problem. Ultimately, the solution is to introduce memory barriers after the AHB-mapped MMIO transfers, to ensure ordering. Fixes: d5433def3153 ("mtd: spi-nor: atmel-quadspi: Add spi-mem support to atmel-quadspi") Cc: Hari.PrasathGE(a)microchip.com Cc: Mahesh.Abotula(a)microchip.com Cc: Marco.Cardellini(a)microchip.com Cc: stable(a)vger.kernel.org # c0a0203cf579: ("spi: atmel-quadspi: Create `atmel_qspi_ops`"...) Cc: stable(a)vger.kernel.org # 6.x.y Signed-off-by: Bence Csókás <csokas.bence(a)prolan.hu> Link: https://patch.msgid.link/20241219091258.395187-1-csokas.bence@prolan.hu Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index f46da363574f..8fdc9d27a95e 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -661,13 +661,20 @@ static int atmel_qspi_transfer(struct spi_mem *mem, (void)atmel_qspi_read(aq, QSPI_IFR); /* Send/Receive data */ - if (op->data.dir == SPI_MEM_DATA_IN) + if (op->data.dir == SPI_MEM_DATA_IN) { memcpy_fromio(op->data.buf.in, aq->mem + offset, op->data.nbytes); - else + + /* Synchronize AHB and APB accesses again */ + rmb(); + } else { memcpy_toio(aq->mem + offset, op->data.buf.out, op->data.nbytes); + /* Synchronize AHB and APB accesses again */ + wmb(); + } + /* Release the chip-select */ atmel_qspi_write(QSPI_CR_LASTXFER, aq, QSPI_CR);

2 weeks, 2 days

1
0
0 0

FAILED: patch "[PATCH] cpufreq: fix using cpufreq-dt as module" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x f1f010c9d9c62c865d9f54e94075800ba764b4d9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021010-liquefy-pointer-8122@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f1f010c9d9c62c865d9f54e94075800ba764b4d9 Mon Sep 17 00:00:00 2001 From: Andreas Kemnade <andreas(a)kemnade.info> Date: Sun, 3 Nov 2024 22:02:51 +0100 Subject: [PATCH] cpufreq: fix using cpufreq-dt as module This driver can be built as a module since commit 3b062a086984 ("cpufreq: dt-platdev: Support building as module"), but unfortunately this caused a regression because the cputfreq-dt-platdev.ko module does not autoload. Usually, this is solved by just using the MODULE_DEVICE_TABLE() macro to export all the device IDs as module aliases. But this driver is special due how matches with devices and decides what platform supports. There are two of_device_id lists, an allow list that are for CPU devices that always match and a deny list that's for devices that must not match. The driver registers a cpufreq-dt platform device for all the CPU device nodes that either are in the allow list or contain an operating-points-v2 property and are not in the deny list. Enforce builtin compile of cpufreq-dt-platdev to make autoload work. Fixes: 3b062a086984 ("cpufreq: dt-platdev: Support building as module") Link: https://lore.kernel.org/all/20241104201424.2a42efdd@akair/ Link: https://lore.kernel.org/all/20241119111918.1732531-1-javierm@redhat.com/ Cc: stable(a)vger.kernel.org Signed-off-by: Andreas Kemnade <andreas(a)kemnade.info> Reported-by: Radu Rendec <rrendec(a)redhat.com> Reported-by: Javier Martinez Canillas <javierm(a)redhat.com> [ Viresh: Picked commit log from Javier, updated tags ] Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 92a83a9bb2e1..ea9afdc119fb 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -232,7 +232,7 @@ config CPUFREQ_VIRT If in doubt, say N. config CPUFREQ_DT_PLATDEV - tristate "Generic DT based cpufreq platdev driver" + bool "Generic DT based cpufreq platdev driver" depends on OF help This adds a generic DT based cpufreq platdev driver for frequency diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index 2a3e8bd317c9..9c198bd4f7e9 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -235,5 +235,3 @@ static int __init cpufreq_dt_platdev_init(void) sizeof(struct cpufreq_dt_platform_data))); } core_initcall(cpufreq_dt_platdev_init); -MODULE_DESCRIPTION("Generic DT based cpufreq platdev driver"); -MODULE_LICENSE("GPL");

2 weeks, 2 days

1
0
0 0

[PATCH v4 0/2] Tegra ADMA fixes

by Mohan Kumar D

- Fix build error due to 64-by-32 division - Additional check for adma max page Mohan Kumar D (2): dmaengine: tegra210-adma: Fix build error due to 64-by-32 division dmaengine: tegra210-adma: check for adma max page drivers/dma/tegra210-adma.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) -- 2.25.1

2 weeks, 2 days

4
13
0 0

[PATCH] USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk

by Marek Vasut

Add Renesas R-Car D3 USB Download mode quirk and update comments on all the other Renesas R-Car USB Download mode quirks to discern them from each other. This follows R-Car Series, 3rd Generation reference manual Rev.2.00 chapter 19.2.8 USB download mode . Fixes: 6d853c9e4104 ("usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode") Signed-off-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> --- Cc: Chris Brandt <chris.brandt(a)renesas.com> Cc: Geert Uytterhoeven <geert+renesas(a)glider.be> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Oliver Neukum <oneukum(a)suse.com> Cc: linux-renesas-soc(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org Cc: stable(a)vger.kernel.org --- drivers/usb/class/cdc-acm.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6b37d1c47fce1..06c7d86c5449e 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1727,13 +1727,16 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, - { USB_DEVICE(0x045b, 0x023c), /* Renesas USB Download mode */ + { USB_DEVICE(0x045b, 0x023c), /* Renesas R-Car H3 USB Download mode */ .driver_info = DISABLE_ECHO, /* Don't echo banner */ }, - { USB_DEVICE(0x045b, 0x0248), /* Renesas USB Download mode */ + { USB_DEVICE(0x045b, 0x0247), /* Renesas R-Car D3 USB Download mode */ .driver_info = DISABLE_ECHO, /* Don't echo banner */ }, - { USB_DEVICE(0x045b, 0x024D), /* Renesas USB Download mode */ + { USB_DEVICE(0x045b, 0x0248), /* Renesas R-Car M3-N USB Download mode */ + .driver_info = DISABLE_ECHO, /* Don't echo banner */ + }, + { USB_DEVICE(0x045b, 0x024D), /* Renesas R-Car E3 USB Download mode */ .driver_info = DISABLE_ECHO, /* Don't echo banner */ }, { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov(a)gmail.com */ -- 2.47.2

2 weeks, 2 days

4
4
0 0

[PATCH v5.15-v5.4] lib/generic-radix-tree.c: Don't overflow in peek()

by hsimeliere.opensource＠witekio.com

From: Kent Overstreet <kent.overstreet(a)gmail.com> [ Upstream commit 9492261ff2460252cf2d8de89cdf854c7e2b28a0 ] When we started spreading new inode numbers throughout most of the 64 bit inode space, that triggered some corner case bugs, in particular some integer overflows related to the radix tree code. Oops. Signed-off-by: Kent Overstreet <kent.overstreet(a)gmail.com> Signed-off-by: Bruno VERNAY <bruno.vernay(a)se.com> Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource(a)witekio.com> --- include/linux/generic-radix-tree.h | 7 +++++++ lib/generic-radix-tree.c | 17 ++++++++++++++--- 2 files changed, 21 insertions(+), 3 deletions(-) diff --git a/include/linux/generic-radix-tree.h b/include/linux/generic-radix-tree.h index bfd00320c7f3..0e7abc635e5f 100644 --- a/include/linux/generic-radix-tree.h +++ b/include/linux/generic-radix-tree.h @@ -39,6 +39,7 @@ #include <asm/page.h> #include <linux/bug.h> #include <linux/kernel.h> +#include <linux/limits.h> #include <linux/log2.h> struct genradix_root; @@ -183,6 +184,12 @@ void *__genradix_iter_peek(struct genradix_iter *, struct __genradix *, size_t); static inline void __genradix_iter_advance(struct genradix_iter *iter, size_t obj_size) { + if (iter->offset + obj_size < iter->offset) { + iter->offset = SIZE_MAX; + iter->pos = SIZE_MAX; + return; + } + iter->offset += obj_size; if (!is_power_of_2(obj_size) && diff --git a/lib/generic-radix-tree.c b/lib/generic-radix-tree.c index 34d3ac52de89..78f081d695d0 100644 --- a/lib/generic-radix-tree.c +++ b/lib/generic-radix-tree.c @@ -168,6 +168,10 @@ void *__genradix_iter_peek(struct genradix_iter *iter, struct genradix_root *r; struct genradix_node *n; unsigned level, i; + + if (iter->offset == SIZE_MAX) + return NULL; + restart: r = READ_ONCE(radix->root); if (!r) @@ -186,10 +190,17 @@ void *__genradix_iter_peek(struct genradix_iter *iter, (GENRADIX_ARY - 1); while (!n->children[i]) { + size_t objs_per_ptr = genradix_depth_size(level); + + if (iter->offset + objs_per_ptr < iter->offset) { + iter->offset = SIZE_MAX; + iter->pos = SIZE_MAX; + return NULL; + } + i++; - iter->offset = round_down(iter->offset + - genradix_depth_size(level), - genradix_depth_size(level)); + iter->offset = round_down(iter->offset + objs_per_ptr, + objs_per_ptr); iter->pos = (iter->offset >> PAGE_SHIFT) * objs_per_page; if (i == GENRADIX_ARY) -- 2.43.0

2 weeks, 2 days

2
3
0 0

[PATCH] fuse: prevent folio use-after-free in readahead

by Vlastimil Babka

There have been crash reports in 6.13+ kernels related to FUSE and Flatpak, such as from Christian: BUG: Bad page state in process rnote pfn:67587 page: refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x67587 flags: 0xfffffc8000020(lru|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc8000020 dead000000000100 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag(s) set CPU: 0 UID: 1000 PID: 1962 Comm: rnote Not tainted 6.14.0-rc1-1-mainline #1 715c0460cf5d3cc18e3178ef3209cee42e97ae1c Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 Call Trace: dump_stack_lvl+0x5d/0x80 bad_page.cold+0x7a/0x91 __rmqueue_pcplist+0x200/0xc50 get_page_from_freelist+0x2ae/0x1740 ? srso_return_thunk+0x5/0x5f ? __pm_runtime_suspend+0x69/0xc0 ? srso_return_thunk+0x5/0x5f ? __seccomp_filter+0x303/0x520 ? srso_return_thunk+0x5/0x5f __alloc_frozen_pages_noprof+0x184/0x330 alloc_pages_mpol+0x7d/0x160 folio_alloc_mpol_noprof+0x14/0x40 vma_alloc_folio_noprof+0x69/0xb0 do_anonymous_page+0x32a/0x8b0 ? srso_return_thunk+0x5/0x5f ? ___pte_offset_map+0x1b/0x180 __handle_mm_fault+0xb5e/0xfe0 handle_mm_fault+0xe2/0x2c0 do_user_addr_fault+0x217/0x620 exc_page_fault+0x81/0x1b0 asm_exc_page_fault+0x26/0x30 RIP: 0033:0x7fcfc31c8cf9 Or Mantas: list_add corruption. next->prev should be prev (ffff889c8f5bd5f0), but was ffff889940066a10. (next=ffffe3ce8b683548). WARNING: CPU: 3 PID: 2184 at lib/list_debug.c:29 __list_add_valid_or_report+0x62/0xb0 spi_intel_pci soundcore nvme_core spi_intel rfkill rtsx_pci nvme_auth cec i8042 video serio wmi CPU: 3 UID: 1000 PID: 2184 Comm: fuse mainloop Tainted: G U OE 6.13.1-arch1-1 #1 c1258adae10e6ad423427764ae6ad3679b7d8e8a Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: LENOVO 20S6003QPB/20S6003QPB, BIOS N2XET42W (1.32 ) 06/12/2024 RIP: 0010:__list_add_valid_or_report+0x62/0xb0 Call Trace: <TASK> ? __list_add_valid_or_report+0x62/0xb0 ? __warn.cold+0x93/0xf6 ? __list_add_valid_or_report+0x62/0xb0 ? report_bug+0xff/0x140 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __list_add_valid_or_report+0x62/0xb0 free_unref_page_commit.cold+0x9/0x12 free_unref_page+0x46e/0x570 fuse_copy_page+0x37e/0x6c0 fuse_copy_args+0x186/0x210 fuse_dev_do_write+0x796/0x12a0 fuse_dev_splice_write+0x29d/0x380 do_splice+0x308/0x890 __do_splice+0x204/0x220 __x64_sys_splice+0x84/0xf0 do_syscall_64+0x82/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x77e0dde36e56 Christian bisected the issue to 3eab9d7bc2f4 ("fuse: convert readahead to use folios"). The bug reports suggest a refcount underflow on struct page due to a use after free or double free. The bisected commit switches fuse_readahead() to readahead_folio() which includes a folio_put() and removes folio_put() from fuse_readpages_end(). As a result folios on the ap->folios (previously ap->pages) don't have an elevated refcount. According to Matthew the folio lock should protect them from being freed prematurely. It's unclear why not, but before this is fully resolved we can stop the kernels from crashing by having the refcount relevated again. Thus switch to __readahead_folio() that does not drop the refcount, and reinstate folio_put() in fuse_readpages_end(). Fixes: 3eab9d7bc2f4 ("fuse: convert readahead to use folios") Reported-by: Christian Heusel <christian(a)heusel.eu> Closes: https://lore.kernel.org/all/2f681f48-00f5-4e09-8431-2b3dbfaa881e@heusel.eu/ Closes: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/110 Reported-by: Mantas Mikulėnas <grawity(a)gmail.com> Closes: https://lore.kernel.org/all/34feb867-09e2-46e4-aa31-d9660a806d1a@gmail.com/ Closes: https://bugzilla.opensuse.org/show_bug.cgi?id=1236660 Tested-by: Joanne Koong <joannelkoong(a)gmail.com> Cc: Vlastimil Babka <vbabka(a)suse.cz> Cc: Matthew Wilcox <willy(a)infradead.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Vlastimil Babka <vbabka(a)suse.cz> --- Given the impact on users and positive testing feedback, this is the proper patch in case Miklos decides to mainline and stable it before the full picture is known. fs/fuse/file.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 7d92a5479998..a40d65ffb94d 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -955,8 +955,10 @@ static void fuse_readpages_end(struct fuse_mount *fm, struct fuse_args *args, fuse_invalidate_atime(inode); } - for (i = 0; i < ap->num_folios; i++) + for (i = 0; i < ap->num_folios; i++) { folio_end_read(ap->folios[i], !err); + folio_put(ap->folios[i]); + } if (ia->ff) fuse_file_put(ia->ff, false); @@ -1048,7 +1050,7 @@ static void fuse_readahead(struct readahead_control *rac) ap = &ia->ap; while (ap->num_folios < cur_pages) { - folio = readahead_folio(rac); + folio = __readahead_folio(rac); ap->folios[ap->num_folios] = folio; ap->descs[ap->num_folios].length = folio_size(folio); ap->num_folios++; -- 2.48.1

2 weeks, 2 days

1
0
0 0

[PATCH] mm/cma: add an API to enable/disable concurrent memory allocation for the CMA

by yangge1116＠126.com

From: yangge <yangge1116(a)126.com> Commit 60a60e32cf91 ("Revert "mm/cma.c: remove redundant cma_mutex lock"") simply reverts to the original method of using the cma_mutex to ensure that alloc_contig_range() runs sequentially. This change was made to avoid concurrency allocation failures. However, it can negatively impact performance when concurrent allocation of CMA memory is required. To address this issue, we could introduce an API for concurrency settings, allowing users to decide whether their CMA can perform concurrent memory allocations or not. Fixes: 60a60e32cf91 ("Revert "mm/cma.c: remove redundant cma_mutex lock"") Signed-off-by: yangge <yangge1116(a)126.com> Cc: <stable(a)vger.kernel.org> --- include/linux/cma.h | 2 ++ mm/cma.c | 22 ++++++++++++++++++++-- mm/cma.h | 1 + 3 files changed, 23 insertions(+), 2 deletions(-) diff --git a/include/linux/cma.h b/include/linux/cma.h index d15b64f..2384624 100644 --- a/include/linux/cma.h +++ b/include/linux/cma.h @@ -53,6 +53,8 @@ extern int cma_for_each_area(int (*it)(struct cma *cma, void *data), void *data) extern void cma_reserve_pages_on_error(struct cma *cma); +extern bool cma_set_concurrency(struct cma *cma, bool concurrency); + #ifdef CONFIG_CMA struct folio *cma_alloc_folio(struct cma *cma, int order, gfp_t gfp); bool cma_free_folio(struct cma *cma, const struct folio *folio); diff --git a/mm/cma.c b/mm/cma.c index de5bc0c..49a7186 100644 --- a/mm/cma.c +++ b/mm/cma.c @@ -460,9 +460,17 @@ static struct page *__cma_alloc(struct cma *cma, unsigned long count, spin_unlock_irq(&cma->lock); pfn = cma->base_pfn + (bitmap_no << cma->order_per_bit); - mutex_lock(&cma_mutex); + + /* + * If the user sets the concurr_alloc of CMA to true, concurrent + * memory allocation is allowed. If the user sets it to false or + * does not set it, concurrent memory allocation is not allowed. + */ + if (!cma->concurr_alloc) + mutex_lock(&cma_mutex); ret = alloc_contig_range(pfn, pfn + count, MIGRATE_CMA, gfp); - mutex_unlock(&cma_mutex); + if (!cma->concurr_alloc) + mutex_unlock(&cma_mutex); if (ret == 0) { page = pfn_to_page(pfn); break; @@ -610,3 +618,13 @@ int cma_for_each_area(int (*it)(struct cma *cma, void *data), void *data) return 0; } + +bool cma_set_concurrency(struct cma *cma, bool concurrency) +{ + if (!cma) + return false; + + cma->concurr_alloc = concurrency; + + return true; +} diff --git a/mm/cma.h b/mm/cma.h index 8485ef8..30f489d 100644 --- a/mm/cma.h +++ b/mm/cma.h @@ -16,6 +16,7 @@ struct cma { unsigned long *bitmap; unsigned int order_per_bit; /* Order of pages represented by one bit */ spinlock_t lock; + bool concurr_alloc; #ifdef CONFIG_CMA_DEBUGFS struct hlist_head mem_head; spinlock_t mem_head_lock; -- 2.7.4

2 weeks, 2 days

6
8
0 0

[PATCH v3 2/5] misc: pci_endpoint_test: Fix disyplaying irq_type after request_irq error

by Kunihiko Hayashi

There are two variables that indicate the interrupt type to be used in the next test execution, global "irq_type" and test->irq_type. The former is referenced from pci_endpoint_test_get_irq() to preserve the current type for ioctl(PCITEST_GET_IRQTYPE). In pci_endpoint_test_request_irq(), since this global variable is referenced when an error occurs, the unintended error message is displayed. For example, the following message shows "MSI 3" even if the current irq type becomes "MSI-X". # pcitest -i 2 pci-endpoint-test 0000:01:00.0: Failed to request IRQ 30 for MSI 3 SET IRQ TYPE TO MSI-X: NOT OKAY Fix this issue by using test->irq_type instead of global "irq_type". Cc: stable(a)vger.kernel.org Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam(a)linaro.org> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko(a)socionext.com> --- drivers/misc/pci_endpoint_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index bbcccd425700..f13fa32ef91a 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -242,7 +242,7 @@ static int pci_endpoint_test_request_irq(struct pci_endpoint_test *test) return 0; fail: - switch (irq_type) { + switch (test->irq_type) { case IRQ_TYPE_INTX: dev_err(dev, "Failed to request IRQ %d for Legacy\n", pci_irq_vector(pdev, i)); -- 2.25.1

2 weeks, 2 days

1
0
0 0

[PATCH 6.6 v2 0/6] md/md-bitmap: move bitmap_{start, end}write to md upper layer

by Yu Kuai

From: Yu Kuai <yukuai3(a)huawei.com> Changes in v2: - Add descriptions about chagnes from the original commits, in order to fix conflicts. This set is actually a refactor, we're bacporting this set because following problems can be fixed: https://lore.kernel.org/all/CAJpMwyjmHQLvm6zg1cmQErttNNQPDAAXPKM3xgTjMhbfts… https://lore.kernel.org/all/ADF7D720-5764-4AF3-B68E-1845988737AA@flyingcirc… See details in patch 6. I'll suggest people to upgrade their kernel to v6.6+, please let me know if anyone really want this set for lower version. Benjamin Marzinski (1): md/raid5: recheck if reshape has finished with device_lock held Yu Kuai (5): md/md-bitmap: factor behind write counters out from bitmap_{start/end}write() md/md-bitmap: remove the last parameter for bimtap_ops->endwrite() md: add a new callback pers->bitmap_sector() md/raid5: implement pers->bitmap_sector() md/md-bitmap: move bitmap_{start, end}write to md upper layer drivers/md/md-bitmap.c | 75 ++++++++++------- drivers/md/md-bitmap.h | 6 +- drivers/md/md.c | 26 ++++++ drivers/md/md.h | 5 ++ drivers/md/raid1.c | 35 ++------ drivers/md/raid1.h | 1 - drivers/md/raid10.c | 26 +----- drivers/md/raid10.h | 1 - drivers/md/raid5-cache.c | 4 - drivers/md/raid5.c | 174 ++++++++++++++++++++++----------------- drivers/md/raid5.h | 4 - 11 files changed, 185 insertions(+), 172 deletions(-) -- 2.39.2

2 weeks, 2 days

1
6
0 0

[PATCH v2 1/3] misc: pci_endpoint_test: Avoid issue of interrupts remaining after request_irq error

by Kunihiko Hayashi

After devm_request_irq() fails with error, pci_endpoint_test_free_irq_vectors() is called to free allocated vectors with pci_free_irq_vectors(). However some requested IRQs are still allocated, so there are still /proc/irq/* entries remaining and we encounters WARN() with the following message: remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'pci-endpoint-test.0' WARNING: CPU: 0 PID: 80 at fs/proc/generic.c:717 remove_proc_entry +0x190/0x19c To solve this issue, set the number of remaining IRQs and release the IRQs in advance by calling pci_endpoint_test_release_irq(). Cc: stable(a)vger.kernel.org Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko(a)socionext.com> --- drivers/misc/pci_endpoint_test.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 3702dcc89ab7..302955c20979 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -252,6 +252,9 @@ static bool pci_endpoint_test_request_irq(struct pci_endpoint_test *test) break; } + test->num_irqs = i; + pci_endpoint_test_release_irq(test); + return false; } -- 2.25.1

2 weeks, 2 days

2
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror