This reverts commit 2537b637eac0bd546f63e1492a34edd30878e8d4 that deleted the whole fib_tests.sh by mistake and caused fib_tests failure in kselftests run.
Signed-off-by: Shaoying Xu shaoyi@amazon.com --- net/ipv4/fib_semantics.c | 1 - tools/testing/selftests/net/fib_tests.sh | 1727 ++++++++++++++++++++++ 2 files changed, 1727 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/net/fib_tests.sh
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index f45b9daf62cf..908913d75847 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -420,7 +420,6 @@ static struct fib_info *fib_find_info(struct fib_info *nfi) nfi->fib_prefsrc == fi->fib_prefsrc && nfi->fib_priority == fi->fib_priority && nfi->fib_type == fi->fib_type && - nfi->fib_tb_id == fi->fib_tb_id && memcmp(nfi->fib_metrics, fi->fib_metrics, sizeof(u32) * RTAX_MAX) == 0 && !((nfi->fib_flags ^ fi->fib_flags) & ~RTNH_COMPARE_MASK) && diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh new file mode 100755 index 000000000000..6986086035d6 --- /dev/null +++ b/tools/testing/selftests/net/fib_tests.sh @@ -0,0 +1,1727 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This test is for checking IPv4 and IPv6 FIB behavior in response to +# different events. + +ret=0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +# all tests in this script. Can be overridden with -t option +TESTS="unregister down carrier nexthop suppress ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric ipv6_route_metrics ipv4_route_metrics ipv4_route_v6_gw rp_filter" + +VERBOSE=0 +PAUSE_ON_FAIL=no +PAUSE=no +IP="ip -netns ns1" +NS_EXEC="ip netns exec ns1" + +which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) + +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ ${rc} -eq ${expected} ]; then + printf " TEST: %-60s [ OK ]\n" "${msg}" + nsuccess=$((nsuccess+1)) + else + ret=1 + nfail=$((nfail+1)) + printf " TEST: %-60s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi + + if [ "${PAUSE}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi +} + +setup() +{ + set -e + ip netns add ns1 + ip netns set ns1 auto + $IP link set dev lo up + ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1 + ip netns exec ns1 sysctl -qw net.ipv6.conf.all.forwarding=1 + + $IP link add dummy0 type dummy + $IP link set dev dummy0 up + $IP address add 198.51.100.1/24 dev dummy0 + $IP -6 address add 2001:db8:1::1/64 dev dummy0 + set +e + +} + +cleanup() +{ + $IP link del dev dummy0 &> /dev/null + ip netns del ns1 + ip netns del ns2 &> /dev/null +} + +get_linklocal() +{ + local dev=$1 + local addr + + addr=$($IP -6 -br addr show dev ${dev} | \ + awk '{ + for (i = 3; i <= NF; ++i) { + if ($i ~ /^fe80/) + print $i + } + }' + ) + addr=${addr//*} + + [ -z "$addr" ] && return 1 + + echo $addr + + return 0 +} + +fib_unreg_unicast_test() +{ + echo + echo "Single path route test" + + setup + + echo " Start point" + $IP route get fibmatch 198.51.100.2 &> /dev/null + log_test $? 0 "IPv4 fibmatch" + $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null + log_test $? 0 "IPv6 fibmatch" + + set -e + $IP link del dev dummy0 + set +e + + echo " Nexthop device deleted" + $IP route get fibmatch 198.51.100.2 &> /dev/null + log_test $? 2 "IPv4 fibmatch - no route" + $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null + log_test $? 2 "IPv6 fibmatch - no route" + + cleanup +} + +fib_unreg_multipath_test() +{ + + echo + echo "Multipath route test" + + setup + + set -e + $IP link add dummy1 type dummy + $IP link set dev dummy1 up + $IP address add 192.0.2.1/24 dev dummy1 + $IP -6 address add 2001:db8:2::1/64 dev dummy1 + + $IP route add 203.0.113.0/24 \ + nexthop via 198.51.100.2 dev dummy0 \ + nexthop via 192.0.2.2 dev dummy1 + $IP -6 route add 2001:db8:3::/64 \ + nexthop via 2001:db8:1::2 dev dummy0 \ + nexthop via 2001:db8:2::2 dev dummy1 + set +e + + echo " Start point" + $IP route get fibmatch 203.0.113.1 &> /dev/null + log_test $? 0 "IPv4 fibmatch" + $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null + log_test $? 0 "IPv6 fibmatch" + + set -e + $IP link del dev dummy0 + set +e + + echo " One nexthop device deleted" + $IP route get fibmatch 203.0.113.1 &> /dev/null + log_test $? 2 "IPv4 - multipath route removed on delete" + + $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null + # In IPv6 we do not flush the entire multipath route. + log_test $? 0 "IPv6 - multipath down to single path" + + set -e + $IP link del dev dummy1 + set +e + + echo " Second nexthop device deleted" + $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null + log_test $? 2 "IPv6 - no route" + + cleanup +} + +fib_unreg_test() +{ + fib_unreg_unicast_test + fib_unreg_multipath_test +} + +fib_down_unicast_test() +{ + echo + echo "Single path, admin down" + + setup + + echo " Start point" + $IP route get fibmatch 198.51.100.2 &> /dev/null + log_test $? 0 "IPv4 fibmatch" + $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null + log_test $? 0 "IPv6 fibmatch" + + set -e + $IP link set dev dummy0 down + set +e + + echo " Route deleted on down" + $IP route get fibmatch 198.51.100.2 &> /dev/null + log_test $? 2 "IPv4 fibmatch" + $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null + log_test $? 2 "IPv6 fibmatch" + + cleanup +} + +fib_down_multipath_test_do() +{ + local down_dev=$1 + local up_dev=$2 + + $IP route get fibmatch 203.0.113.1 \ + oif $down_dev &> /dev/null + log_test $? 2 "IPv4 fibmatch on down device" + $IP -6 route get fibmatch 2001:db8:3::1 \ + oif $down_dev &> /dev/null + log_test $? 2 "IPv6 fibmatch on down device" + + $IP route get fibmatch 203.0.113.1 \ + oif $up_dev &> /dev/null + log_test $? 0 "IPv4 fibmatch on up device" + $IP -6 route get fibmatch 2001:db8:3::1 \ + oif $up_dev &> /dev/null + log_test $? 0 "IPv6 fibmatch on up device" + + $IP route get fibmatch 203.0.113.1 | \ + grep $down_dev | grep -q "dead linkdown" + log_test $? 0 "IPv4 flags on down device" + $IP -6 route get fibmatch 2001:db8:3::1 | \ + grep $down_dev | grep -q "dead linkdown" + log_test $? 0 "IPv6 flags on down device" + + $IP route get fibmatch 203.0.113.1 | \ + grep $up_dev | grep -q "dead linkdown" + log_test $? 1 "IPv4 flags on up device" + $IP -6 route get fibmatch 2001:db8:3::1 | \ + grep $up_dev | grep -q "dead linkdown" + log_test $? 1 "IPv6 flags on up device" +} + +fib_down_multipath_test() +{ + echo + echo "Admin down multipath" + + setup + + set -e + $IP link add dummy1 type dummy + $IP link set dev dummy1 up + + $IP address add 192.0.2.1/24 dev dummy1 + $IP -6 address add 2001:db8:2::1/64 dev dummy1 + + $IP route add 203.0.113.0/24 \ + nexthop via 198.51.100.2 dev dummy0 \ + nexthop via 192.0.2.2 dev dummy1 + $IP -6 route add 2001:db8:3::/64 \ + nexthop via 2001:db8:1::2 dev dummy0 \ + nexthop via 2001:db8:2::2 dev dummy1 + set +e + + echo " Verify start point" + $IP route get fibmatch 203.0.113.1 &> /dev/null + log_test $? 0 "IPv4 fibmatch" + + $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null + log_test $? 0 "IPv6 fibmatch" + + set -e + $IP link set dev dummy0 down + set +e + + echo " One device down, one up" + fib_down_multipath_test_do "dummy0" "dummy1" + + set -e + $IP link set dev dummy0 up + $IP link set dev dummy1 down + set +e + + echo " Other device down and up" + fib_down_multipath_test_do "dummy1" "dummy0" + + set -e + $IP link set dev dummy0 down + set +e + + echo " Both devices down" + $IP route get fibmatch 203.0.113.1 &> /dev/null + log_test $? 2 "IPv4 fibmatch" + $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null + log_test $? 2 "IPv6 fibmatch" + + $IP link del dev dummy1 + cleanup +} + +fib_down_test() +{ + fib_down_unicast_test + fib_down_multipath_test +} + +# Local routes should not be affected when carrier changes. +fib_carrier_local_test() +{ + echo + echo "Local carrier tests - single path" + + setup + + set -e + $IP link set dev dummy0 carrier on + set +e + + echo " Start point" + $IP route get fibmatch 198.51.100.1 &> /dev/null + log_test $? 0 "IPv4 fibmatch" + $IP -6 route get fibmatch 2001:db8:1::1 &> /dev/null + log_test $? 0 "IPv6 fibmatch" + + $IP route get fibmatch 198.51.100.1 | \ + grep -q "linkdown" + log_test $? 1 "IPv4 - no linkdown flag" + $IP -6 route get fibmatch 2001:db8:1::1 | \ + grep -q "linkdown" + log_test $? 1 "IPv6 - no linkdown flag" + + set -e + $IP link set dev dummy0 carrier off + sleep 1 + set +e + + echo " Carrier off on nexthop" + $IP route get fibmatch 198.51.100.1 &> /dev/null + log_test $? 0 "IPv4 fibmatch" + $IP -6 route get fibmatch 2001:db8:1::1 &> /dev/null + log_test $? 0 "IPv6 fibmatch" + + $IP route get fibmatch 198.51.100.1 | \ + grep -q "linkdown" + log_test $? 1 "IPv4 - linkdown flag set" + $IP -6 route get fibmatch 2001:db8:1::1 | \ + grep -q "linkdown" + log_test $? 1 "IPv6 - linkdown flag set" + + set -e + $IP address add 192.0.2.1/24 dev dummy0 + $IP -6 address add 2001:db8:2::1/64 dev dummy0 + set +e + + echo " Route to local address with carrier down" + $IP route get fibmatch 192.0.2.1 &> /dev/null + log_test $? 0 "IPv4 fibmatch" + $IP -6 route get fibmatch 2001:db8:2::1 &> /dev/null + log_test $? 0 "IPv6 fibmatch" + + $IP route get fibmatch 192.0.2.1 | \ + grep -q "linkdown" + log_test $? 1 "IPv4 linkdown flag set" + $IP -6 route get fibmatch 2001:db8:2::1 | \ + grep -q "linkdown" + log_test $? 1 "IPv6 linkdown flag set" + + cleanup +} + +fib_carrier_unicast_test() +{ + ret=0 + + echo + echo "Single path route carrier test" + + setup + + set -e + $IP link set dev dummy0 carrier on + set +e + + echo " Start point" + $IP route get fibmatch 198.51.100.2 &> /dev/null + log_test $? 0 "IPv4 fibmatch" + $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null + log_test $? 0 "IPv6 fibmatch" + + $IP route get fibmatch 198.51.100.2 | \ + grep -q "linkdown" + log_test $? 1 "IPv4 no linkdown flag" + $IP -6 route get fibmatch 2001:db8:1::2 | \ + grep -q "linkdown" + log_test $? 1 "IPv6 no linkdown flag" + + set -e + $IP link set dev dummy0 carrier off + sleep 1 + set +e + + echo " Carrier down" + $IP route get fibmatch 198.51.100.2 &> /dev/null + log_test $? 0 "IPv4 fibmatch" + $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null + log_test $? 0 "IPv6 fibmatch" + + $IP route get fibmatch 198.51.100.2 | \ + grep -q "linkdown" + log_test $? 0 "IPv4 linkdown flag set" + $IP -6 route get fibmatch 2001:db8:1::2 | \ + grep -q "linkdown" + log_test $? 0 "IPv6 linkdown flag set" + + set -e + $IP address add 192.0.2.1/24 dev dummy0 + $IP -6 address add 2001:db8:2::1/64 dev dummy0 + set +e + + echo " Second address added with carrier down" + $IP route get fibmatch 192.0.2.2 &> /dev/null + log_test $? 0 "IPv4 fibmatch" + $IP -6 route get fibmatch 2001:db8:2::2 &> /dev/null + log_test $? 0 "IPv6 fibmatch" + + $IP route get fibmatch 192.0.2.2 | \ + grep -q "linkdown" + log_test $? 0 "IPv4 linkdown flag set" + $IP -6 route get fibmatch 2001:db8:2::2 | \ + grep -q "linkdown" + log_test $? 0 "IPv6 linkdown flag set" + + cleanup +} + +fib_carrier_test() +{ + fib_carrier_local_test + fib_carrier_unicast_test +} + +fib_rp_filter_test() +{ + echo + echo "IPv4 rp_filter tests" + + setup + + set -e + ip netns add ns2 + ip netns set ns2 auto + + ip -netns ns2 link set dev lo up + + $IP link add name veth1 type veth peer name veth2 + $IP link set dev veth2 netns ns2 + $IP address add 192.0.2.1/24 dev veth1 + ip -netns ns2 address add 192.0.2.1/24 dev veth2 + $IP link set dev veth1 up + ip -netns ns2 link set dev veth2 up + + $IP link set dev lo address 52:54:00:6a:c7:5e + $IP link set dev veth1 address 52:54:00:6a:c7:5e + ip -netns ns2 link set dev lo address 52:54:00:6a:c7:5e + ip -netns ns2 link set dev veth2 address 52:54:00:6a:c7:5e + + # 1. (ns2) redirect lo's egress to veth2's egress + ip netns exec ns2 tc qdisc add dev lo parent root handle 1: fq_codel + ip netns exec ns2 tc filter add dev lo parent 1: protocol arp basic \ + action mirred egress redirect dev veth2 + ip netns exec ns2 tc filter add dev lo parent 1: protocol ip basic \ + action mirred egress redirect dev veth2 + + # 2. (ns1) redirect veth1's ingress to lo's ingress + $NS_EXEC tc qdisc add dev veth1 ingress + $NS_EXEC tc filter add dev veth1 ingress protocol arp basic \ + action mirred ingress redirect dev lo + $NS_EXEC tc filter add dev veth1 ingress protocol ip basic \ + action mirred ingress redirect dev lo + + # 3. (ns1) redirect lo's egress to veth1's egress + $NS_EXEC tc qdisc add dev lo parent root handle 1: fq_codel + $NS_EXEC tc filter add dev lo parent 1: protocol arp basic \ + action mirred egress redirect dev veth1 + $NS_EXEC tc filter add dev lo parent 1: protocol ip basic \ + action mirred egress redirect dev veth1 + + # 4. (ns2) redirect veth2's ingress to lo's ingress + ip netns exec ns2 tc qdisc add dev veth2 ingress + ip netns exec ns2 tc filter add dev veth2 ingress protocol arp basic \ + action mirred ingress redirect dev lo + ip netns exec ns2 tc filter add dev veth2 ingress protocol ip basic \ + action mirred ingress redirect dev lo + + $NS_EXEC sysctl -qw net.ipv4.conf.all.rp_filter=1 + $NS_EXEC sysctl -qw net.ipv4.conf.all.accept_local=1 + $NS_EXEC sysctl -qw net.ipv4.conf.all.route_localnet=1 + ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=1 + ip netns exec ns2 sysctl -qw net.ipv4.conf.all.accept_local=1 + ip netns exec ns2 sysctl -qw net.ipv4.conf.all.route_localnet=1 + set +e + + run_cmd "ip netns exec ns2 ping -w1 -c1 192.0.2.1" + log_test $? 0 "rp_filter passes local packets" + + run_cmd "ip netns exec ns2 ping -w1 -c1 127.0.0.1" + log_test $? 0 "rp_filter passes loopback packets" + + cleanup +} + +################################################################################ +# Tests on nexthop spec + +# run 'ip route add' with given spec +add_rt() +{ + local desc="$1" + local erc=$2 + local vrf=$3 + local pfx=$4 + local gw=$5 + local dev=$6 + local cmd out rc + + [ "$vrf" = "-" ] && vrf="default" + [ -n "$gw" ] && gw="via $gw" + [ -n "$dev" ] && dev="dev $dev" + + cmd="$IP route add vrf $vrf $pfx $gw $dev" + if [ "$VERBOSE" = "1" ]; then + printf "\n COMMAND: $cmd\n" + fi + + out=$(eval $cmd 2>&1) + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo " $out" + fi + log_test $rc $erc "$desc" +} + +fib4_nexthop() +{ + echo + echo "IPv4 nexthop tests" + + echo "<<< write me >>>" +} + +fib6_nexthop() +{ + local lldummy=$(get_linklocal dummy0) + local llv1=$(get_linklocal dummy0) + + if [ -z "$lldummy" ]; then + echo "Failed to get linklocal address for dummy0" + return 1 + fi + if [ -z "$llv1" ]; then + echo "Failed to get linklocal address for veth1" + return 1 + fi + + echo + echo "IPv6 nexthop tests" + + add_rt "Directly connected nexthop, unicast address" 0 \ + - 2001:db8:101::/64 2001:db8:1::2 + add_rt "Directly connected nexthop, unicast address with device" 0 \ + - 2001:db8:102::/64 2001:db8:1::2 "dummy0" + add_rt "Gateway is linklocal address" 0 \ + - 2001:db8:103::1/64 $llv1 "veth0" + + # fails because LL address requires a device + add_rt "Gateway is linklocal address, no device" 2 \ + - 2001:db8:104::1/64 $llv1 + + # local address can not be a gateway + add_rt "Gateway can not be local unicast address" 2 \ + - 2001:db8:105::/64 2001:db8:1::1 + add_rt "Gateway can not be local unicast address, with device" 2 \ + - 2001:db8:106::/64 2001:db8:1::1 "dummy0" + add_rt "Gateway can not be a local linklocal address" 2 \ + - 2001:db8:107::1/64 $lldummy "dummy0" + + # VRF tests + add_rt "Gateway can be local address in a VRF" 0 \ + - 2001:db8:108::/64 2001:db8:51::2 + add_rt "Gateway can be local address in a VRF, with device" 0 \ + - 2001:db8:109::/64 2001:db8:51::2 "veth0" + add_rt "Gateway can be local linklocal address in a VRF" 0 \ + - 2001:db8:110::1/64 $llv1 "veth0" + + add_rt "Redirect to VRF lookup" 0 \ + - 2001:db8:111::/64 "" "red" + + add_rt "VRF route, gateway can be local address in default VRF" 0 \ + red 2001:db8:112::/64 2001:db8:51::1 + + # local address in same VRF fails + add_rt "VRF route, gateway can not be a local address" 2 \ + red 2001:db8:113::1/64 2001:db8:2::1 + add_rt "VRF route, gateway can not be a local addr with device" 2 \ + red 2001:db8:114::1/64 2001:db8:2::1 "dummy1" +} + +# Default VRF: +# dummy0 - 198.51.100.1/24 2001:db8:1::1/64 +# veth0 - 192.0.2.1/24 2001:db8:51::1/64 +# +# VRF red: +# dummy1 - 192.168.2.1/24 2001:db8:2::1/64 +# veth1 - 192.0.2.2/24 2001:db8:51::2/64 +# +# [ dummy0 veth0 ]--[ veth1 dummy1 ] + +fib_nexthop_test() +{ + setup + + set -e + + $IP -4 rule add pref 32765 table local + $IP -4 rule del pref 0 + $IP -6 rule add pref 32765 table local + $IP -6 rule del pref 0 + + $IP link add red type vrf table 1 + $IP link set red up + $IP -4 route add vrf red unreachable default metric 4278198272 + $IP -6 route add vrf red unreachable default metric 4278198272 + + $IP link add veth0 type veth peer name veth1 + $IP link set dev veth0 up + $IP address add 192.0.2.1/24 dev veth0 + $IP -6 address add 2001:db8:51::1/64 dev veth0 + + $IP link set dev veth1 vrf red up + $IP address add 192.0.2.2/24 dev veth1 + $IP -6 address add 2001:db8:51::2/64 dev veth1 + + $IP link add dummy1 type dummy + $IP link set dev dummy1 vrf red up + $IP address add 192.168.2.1/24 dev dummy1 + $IP -6 address add 2001:db8:2::1/64 dev dummy1 + set +e + + sleep 1 + fib4_nexthop + fib6_nexthop + + ( + $IP link del dev dummy1 + $IP link del veth0 + $IP link del red + ) 2>/dev/null + cleanup +} + +fib_suppress_test() +{ + echo + echo "FIB rule with suppress_prefixlength" + setup + + $IP link add dummy1 type dummy + $IP link set dummy1 up + $IP -6 route add default dev dummy1 + $IP -6 rule add table main suppress_prefixlength 0 + ping -f -c 1000 -W 1 1234::1 >/dev/null 2>&1 + $IP -6 rule del table main suppress_prefixlength 0 + $IP link del dummy1 + + # If we got here without crashing, we're good. + log_test 0 0 "FIB rule suppress test" + + cleanup +} + +################################################################################ +# Tests on route add and replace + +run_cmd() +{ + local cmd="$1" + local out + local stderr="2>/dev/null" + + if [ "$VERBOSE" = "1" ]; then + printf " COMMAND: $cmd\n" + stderr= + fi + + out=$(eval $cmd $stderr) + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo " $out" + fi + + [ "$VERBOSE" = "1" ] && echo + + return $rc +} + +check_expected() +{ + local out="$1" + local expected="$2" + local rc=0 + + [ "${out}" = "${expected}" ] && return 0 + + if [ -z "${out}" ]; then + if [ "$VERBOSE" = "1" ]; then + printf "\nNo route entry found\n" + printf "Expected:\n" + printf " ${expected}\n" + fi + return 1 + fi + + # tricky way to convert output to 1-line without ip's + # messy ''; this drops all extra white space + out=$(echo ${out}) + if [ "${out}" != "${expected}" ]; then + rc=1 + if [ "${VERBOSE}" = "1" ]; then + printf " Unexpected route entry. Have:\n" + printf " ${out}\n" + printf " Expected:\n" + printf " ${expected}\n\n" + fi + fi + + return $rc +} + +# add route for a prefix, flushing any existing routes first +# expected to be the first step of a test +add_route6() +{ + local pfx="$1" + local nh="$2" + local out + + if [ "$VERBOSE" = "1" ]; then + echo + echo " ##################################################" + echo + fi + + run_cmd "$IP -6 ro flush ${pfx}" + [ $? -ne 0 ] && exit 1 + + out=$($IP -6 ro ls match ${pfx}) + if [ -n "$out" ]; then + echo "Failed to flush routes for prefix used for tests." + exit 1 + fi + + run_cmd "$IP -6 ro add ${pfx} ${nh}" + if [ $? -ne 0 ]; then + echo "Failed to add initial route for test." + exit 1 + fi +} + +# add initial route - used in replace route tests +add_initial_route6() +{ + add_route6 "2001:db8:104::/64" "$1" +} + +check_route6() +{ + local pfx + local expected="$1" + local out + local rc=0 + + set -- $expected + pfx=$1 + + out=$($IP -6 ro ls match ${pfx} | sed -e 's/ pref medium//') + check_expected "${out}" "${expected}" +} + +route_cleanup() +{ + $IP li del red 2>/dev/null + $IP li del dummy1 2>/dev/null + $IP li del veth1 2>/dev/null + $IP li del veth3 2>/dev/null + + cleanup &> /dev/null +} + +route_setup() +{ + route_cleanup + setup + + [ "${VERBOSE}" = "1" ] && set -x + set -e + + ip netns add ns2 + ip netns set ns2 auto + ip -netns ns2 link set dev lo up + ip netns exec ns2 sysctl -qw net.ipv4.ip_forward=1 + ip netns exec ns2 sysctl -qw net.ipv6.conf.all.forwarding=1 + + $IP li add veth1 type veth peer name veth2 + $IP li add veth3 type veth peer name veth4 + + $IP li set veth1 up + $IP li set veth3 up + $IP li set veth2 netns ns2 up + $IP li set veth4 netns ns2 up + ip -netns ns2 li add dummy1 type dummy + ip -netns ns2 li set dummy1 up + + $IP -6 addr add 2001:db8:101::1/64 dev veth1 nodad + $IP -6 addr add 2001:db8:103::1/64 dev veth3 nodad + $IP addr add 172.16.101.1/24 dev veth1 + $IP addr add 172.16.103.1/24 dev veth3 + + ip -netns ns2 -6 addr add 2001:db8:101::2/64 dev veth2 nodad + ip -netns ns2 -6 addr add 2001:db8:103::2/64 dev veth4 nodad + ip -netns ns2 -6 addr add 2001:db8:104::1/64 dev dummy1 nodad + + ip -netns ns2 addr add 172.16.101.2/24 dev veth2 + ip -netns ns2 addr add 172.16.103.2/24 dev veth4 + ip -netns ns2 addr add 172.16.104.1/24 dev dummy1 + + set +e +} + +# assumption is that basic add of a single path route works +# otherwise just adding an address on an interface is broken +ipv6_rt_add() +{ + local rc + + echo + echo "IPv6 route add / append tests" + + # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2" + log_test $? 2 "Attempt to add duplicate route - gw" + + # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro add 2001:db8:104::/64 dev veth3" + log_test $? 2 "Attempt to add duplicate route - dev only" + + # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64" + log_test $? 2 "Attempt to add duplicate route - reject route" + + # route append with same prefix adds a new route + # - iproute2 sets NLM_F_CREATE | NLM_F_APPEND + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro append 2001:db8:104::/64 via 2001:db8:103::2" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + log_test $? 0 "Append nexthop to existing route - gw" + + # insert mpath directly + add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + log_test $? 0 "Add multipath route" + + add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro add 2001:db8:104::/64 nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + log_test $? 2 "Attempt to add duplicate multipath route" + + # insert of a second route without append but different metric + add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" + run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2 metric 512" + rc=$? + if [ $rc -eq 0 ]; then + run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::3 metric 256" + rc=$? + fi + log_test $rc 0 "Route add with different metrics" + + run_cmd "$IP -6 ro del 2001:db8:104::/64 metric 512" + rc=$? + if [ $rc -eq 0 ]; then + check_route6 "2001:db8:104::/64 via 2001:db8:103::3 dev veth3 metric 256 2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024" + rc=$? + fi + log_test $rc 0 "Route delete with metric" +} + +ipv6_rt_replace_single() +{ + # single path with single path + # + add_initial_route6 "via 2001:db8:101::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:103::2" + check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024" + log_test $? 0 "Single path with single path" + + # single path with multipath + # + add_initial_route6 "nexthop via 2001:db8:101::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::2" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + log_test $? 0 "Single path with multipath" + + # single path with single path using MULTIPATH attribute + # + add_initial_route6 "via 2001:db8:101::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:103::2" + check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024" + log_test $? 0 "Single path with single path via multipath attribute" + + # route replace fails - invalid nexthop + add_initial_route6 "via 2001:db8:101::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:104::2" + if [ $? -eq 0 ]; then + # previous command is expected to fail so if it returns 0 + # that means the test failed. + log_test 0 1 "Invalid nexthop" + else + check_route6 "2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024" + log_test $? 0 "Invalid nexthop" + fi + + # replace non-existent route + # - note use of change versus replace since ip adds NLM_F_CREATE + # for replace + add_initial_route6 "via 2001:db8:101::2" + run_cmd "$IP -6 ro change 2001:db8:105::/64 via 2001:db8:101::2" + log_test $? 2 "Single path - replace of non-existent route" +} + +ipv6_rt_replace_mpath() +{ + # multipath with multipath + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::3 dev veth3 weight 1" + log_test $? 0 "Multipath with multipath" + + # multipath with single + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:101::3" + check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024" + log_test $? 0 "Multipath with single path" + + # multipath with single + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3" + check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024" + log_test $? 0 "Multipath with single path via multipath attribute" + + # multipath with dev-only + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 dev veth1" + check_route6 "2001:db8:104::/64 dev veth1 metric 1024" + log_test $? 0 "Multipath with dev-only" + + # route replace fails - invalid nexthop 1 + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:111::3 nexthop via 2001:db8:103::3" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + log_test $? 0 "Multipath - invalid first nexthop" + + # route replace fails - invalid nexthop 2 + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:113::3" + check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + log_test $? 0 "Multipath - invalid second nexthop" + + # multipath non-existent route + add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + run_cmd "$IP -6 ro change 2001:db8:105::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3" + log_test $? 2 "Multipath - replace of non-existent route" +} + +ipv6_rt_replace() +{ + echo + echo "IPv6 route replace tests" + + ipv6_rt_replace_single + ipv6_rt_replace_mpath +} + +ipv6_route_test() +{ + route_setup + + ipv6_rt_add + ipv6_rt_replace + + route_cleanup +} + +ip_addr_metric_check() +{ + ip addr help 2>&1 | grep -q metric + if [ $? -ne 0 ]; then + echo "iproute2 command does not support metric for addresses. Skipping test" + return 1 + fi + + return 0 +} + +ipv6_addr_metric_test() +{ + local rc + + echo + echo "IPv6 prefix route tests" + + ip_addr_metric_check || return 1 + + setup + + set -e + $IP li add dummy1 type dummy + $IP li add dummy2 type dummy + $IP li set dummy1 up + $IP li set dummy2 up + + # default entry is metric 256 + run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64" + run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64" + set +e + + check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 256 2001:db8:104::/64 dev dummy2 proto kernel metric 256" + log_test $? 0 "Default metric" + + set -e + run_cmd "$IP -6 addr flush dev dummy1" + run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64 metric 257" + set +e + + check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 256 2001:db8:104::/64 dev dummy1 proto kernel metric 257" + log_test $? 0 "User specified metric on first device" + + set -e + run_cmd "$IP -6 addr flush dev dummy2" + run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64 metric 258" + set +e + + check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 257 2001:db8:104::/64 dev dummy2 proto kernel metric 258" + log_test $? 0 "User specified metric on second device" + + run_cmd "$IP -6 addr del dev dummy1 2001:db8:104::1/64 metric 257" + rc=$? + if [ $rc -eq 0 ]; then + check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 258" + rc=$? + fi + log_test $rc 0 "Delete of address on first device" + + run_cmd "$IP -6 addr change dev dummy2 2001:db8:104::2/64 metric 259" + rc=$? + if [ $rc -eq 0 ]; then + check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259" + rc=$? + fi + log_test $rc 0 "Modify metric of address" + + # verify prefix route removed on down + run_cmd "ip netns exec ns1 sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1" + run_cmd "$IP li set dev dummy2 down" + rc=$? + if [ $rc -eq 0 ]; then + out=$($IP -6 ro ls match 2001:db8:104::/64) + check_expected "${out}" "" + rc=$? + fi + log_test $rc 0 "Prefix route removed on link down" + + # verify prefix route re-inserted with assigned metric + run_cmd "$IP li set dev dummy2 up" + rc=$? + if [ $rc -eq 0 ]; then + check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259" + rc=$? + fi + log_test $rc 0 "Prefix route with metric on link up" + + # verify peer metric added correctly + set -e + run_cmd "$IP -6 addr flush dev dummy2" + run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::1 peer 2001:db8:104::2 metric 260" + set +e + + check_route6 "2001:db8:104::1 dev dummy2 proto kernel metric 260" + log_test $? 0 "Set metric with peer route on local side" + check_route6 "2001:db8:104::2 dev dummy2 proto kernel metric 260" + log_test $? 0 "Set metric with peer route on peer side" + + set -e + run_cmd "$IP -6 addr change dev dummy2 2001:db8:104::1 peer 2001:db8:104::3 metric 261" + set +e + + check_route6 "2001:db8:104::1 dev dummy2 proto kernel metric 261" + log_test $? 0 "Modify metric and peer address on local side" + check_route6 "2001:db8:104::3 dev dummy2 proto kernel metric 261" + log_test $? 0 "Modify metric and peer address on peer side" + + $IP li del dummy1 + $IP li del dummy2 + cleanup +} + +ipv6_route_metrics_test() +{ + local rc + + echo + echo "IPv6 routes with metrics" + + route_setup + + # + # single path with metrics + # + run_cmd "$IP -6 ro add 2001:db8:111::/64 via 2001:db8:101::2 mtu 1400" + rc=$? + if [ $rc -eq 0 ]; then + check_route6 "2001:db8:111::/64 via 2001:db8:101::2 dev veth1 metric 1024 mtu 1400" + rc=$? + fi + log_test $rc 0 "Single path route with mtu metric" + + + # + # multipath via separate routes with metrics + # + run_cmd "$IP -6 ro add 2001:db8:112::/64 via 2001:db8:101::2 mtu 1400" + run_cmd "$IP -6 ro append 2001:db8:112::/64 via 2001:db8:103::2" + rc=$? + if [ $rc -eq 0 ]; then + check_route6 "2001:db8:112::/64 metric 1024 mtu 1400 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + rc=$? + fi + log_test $rc 0 "Multipath route via 2 single routes with mtu metric on first" + + # second route is coalesced to first to make a multipath route. + # MTU of the second path is hidden from display! + run_cmd "$IP -6 ro add 2001:db8:113::/64 via 2001:db8:101::2" + run_cmd "$IP -6 ro append 2001:db8:113::/64 via 2001:db8:103::2 mtu 1400" + rc=$? + if [ $rc -eq 0 ]; then + check_route6 "2001:db8:113::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + rc=$? + fi + log_test $rc 0 "Multipath route via 2 single routes with mtu metric on 2nd" + + run_cmd "$IP -6 ro del 2001:db8:113::/64 via 2001:db8:101::2" + if [ $? -eq 0 ]; then + check_route6 "2001:db8:113::/64 via 2001:db8:103::2 dev veth3 metric 1024 mtu 1400" + log_test $? 0 " MTU of second leg" + fi + + # + # multipath with metrics + # + run_cmd "$IP -6 ro add 2001:db8:115::/64 mtu 1400 nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" + rc=$? + if [ $rc -eq 0 ]; then + check_route6 "2001:db8:115::/64 metric 1024 mtu 1400 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" + rc=$? + fi + log_test $rc 0 "Multipath route with mtu metric" + + $IP -6 ro add 2001:db8:104::/64 via 2001:db8:101::2 mtu 1300 + run_cmd "ip netns exec ns1 ${ping6} -w1 -c1 -s 1500 2001:db8:104::1" + log_test $? 0 "Using route with mtu metric" + + run_cmd "$IP -6 ro add 2001:db8:114::/64 via 2001:db8:101::2 congctl lock foo" + log_test $? 2 "Invalid metric (fails metric_convert)" + + route_cleanup +} + +# add route for a prefix, flushing any existing routes first +# expected to be the first step of a test +add_route() +{ + local pfx="$1" + local nh="$2" + local out + + if [ "$VERBOSE" = "1" ]; then + echo + echo " ##################################################" + echo + fi + + run_cmd "$IP ro flush ${pfx}" + [ $? -ne 0 ] && exit 1 + + out=$($IP ro ls match ${pfx}) + if [ -n "$out" ]; then + echo "Failed to flush routes for prefix used for tests." + exit 1 + fi + + run_cmd "$IP ro add ${pfx} ${nh}" + if [ $? -ne 0 ]; then + echo "Failed to add initial route for test." + exit 1 + fi +} + +# add initial route - used in replace route tests +add_initial_route() +{ + add_route "172.16.104.0/24" "$1" +} + +check_route() +{ + local pfx + local expected="$1" + local out + + set -- $expected + pfx=$1 + [ "${pfx}" = "unreachable" ] && pfx=$2 + + out=$($IP ro ls match ${pfx}) + check_expected "${out}" "${expected}" +} + +# assumption is that basic add of a single path route works +# otherwise just adding an address on an interface is broken +ipv4_rt_add() +{ + local rc + + echo + echo "IPv4 route add / append tests" + + # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL + add_route "172.16.104.0/24" "via 172.16.101.2" + run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.2" + log_test $? 2 "Attempt to add duplicate route - gw" + + # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL + add_route "172.16.104.0/24" "via 172.16.101.2" + run_cmd "$IP ro add 172.16.104.0/24 dev veth3" + log_test $? 2 "Attempt to add duplicate route - dev only" + + # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL + add_route "172.16.104.0/24" "via 172.16.101.2" + run_cmd "$IP ro add unreachable 172.16.104.0/24" + log_test $? 2 "Attempt to add duplicate route - reject route" + + # iproute2 prepend only sets NLM_F_CREATE + # - adds a new route; does NOT convert existing route to ECMP + add_route "172.16.104.0/24" "via 172.16.101.2" + run_cmd "$IP ro prepend 172.16.104.0/24 via 172.16.103.2" + check_route "172.16.104.0/24 via 172.16.103.2 dev veth3 172.16.104.0/24 via 172.16.101.2 dev veth1" + log_test $? 0 "Add new nexthop for existing prefix" + + # route append with same prefix adds a new route + # - iproute2 sets NLM_F_CREATE | NLM_F_APPEND + add_route "172.16.104.0/24" "via 172.16.101.2" + run_cmd "$IP ro append 172.16.104.0/24 via 172.16.103.2" + check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 via 172.16.103.2 dev veth3" + log_test $? 0 "Append nexthop to existing route - gw" + + add_route "172.16.104.0/24" "via 172.16.101.2" + run_cmd "$IP ro append 172.16.104.0/24 dev veth3" + check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 dev veth3 scope link" + log_test $? 0 "Append nexthop to existing route - dev only" + + add_route "172.16.104.0/24" "via 172.16.101.2" + run_cmd "$IP ro append unreachable 172.16.104.0/24" + check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 unreachable 172.16.104.0/24" + log_test $? 0 "Append nexthop to existing route - reject route" + + run_cmd "$IP ro flush 172.16.104.0/24" + run_cmd "$IP ro add unreachable 172.16.104.0/24" + run_cmd "$IP ro append 172.16.104.0/24 via 172.16.103.2" + check_route "unreachable 172.16.104.0/24 172.16.104.0/24 via 172.16.103.2 dev veth3" + log_test $? 0 "Append nexthop to existing reject route - gw" + + run_cmd "$IP ro flush 172.16.104.0/24" + run_cmd "$IP ro add unreachable 172.16.104.0/24" + run_cmd "$IP ro append 172.16.104.0/24 dev veth3" + check_route "unreachable 172.16.104.0/24 172.16.104.0/24 dev veth3 scope link" + log_test $? 0 "Append nexthop to existing reject route - dev only" + + # insert mpath directly + add_route "172.16.104.0/24" "nexthop via 172.16.101.2 nexthop via 172.16.103.2" + check_route "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" + log_test $? 0 "add multipath route" + + add_route "172.16.104.0/24" "nexthop via 172.16.101.2 nexthop via 172.16.103.2" + run_cmd "$IP ro add 172.16.104.0/24 nexthop via 172.16.101.2 nexthop via 172.16.103.2" + log_test $? 2 "Attempt to add duplicate multipath route" + + # insert of a second route without append but different metric + add_route "172.16.104.0/24" "via 172.16.101.2" + run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.2 metric 512" + rc=$? + if [ $rc -eq 0 ]; then + run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.3 metric 256" + rc=$? + fi + log_test $rc 0 "Route add with different metrics" + + run_cmd "$IP ro del 172.16.104.0/24 metric 512" + rc=$? + if [ $rc -eq 0 ]; then + check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 via 172.16.103.3 dev veth3 metric 256" + rc=$? + fi + log_test $rc 0 "Route delete with metric" +} + +ipv4_rt_replace_single() +{ + # single path with single path + # + add_initial_route "via 172.16.101.2" + run_cmd "$IP ro replace 172.16.104.0/24 via 172.16.103.2" + check_route "172.16.104.0/24 via 172.16.103.2 dev veth3" + log_test $? 0 "Single path with single path" + + # single path with multipath + # + add_initial_route "nexthop via 172.16.101.2" + run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.2" + check_route "172.16.104.0/24 nexthop via 172.16.101.3 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" + log_test $? 0 "Single path with multipath" + + # single path with reject + # + add_initial_route "nexthop via 172.16.101.2" + run_cmd "$IP ro replace unreachable 172.16.104.0/24" + check_route "unreachable 172.16.104.0/24" + log_test $? 0 "Single path with reject route" + + # single path with single path using MULTIPATH attribute + # + add_initial_route "via 172.16.101.2" + run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.103.2" + check_route "172.16.104.0/24 via 172.16.103.2 dev veth3" + log_test $? 0 "Single path with single path via multipath attribute" + + # route replace fails - invalid nexthop + add_initial_route "via 172.16.101.2" + run_cmd "$IP ro replace 172.16.104.0/24 via 2001:db8:104::2" + if [ $? -eq 0 ]; then + # previous command is expected to fail so if it returns 0 + # that means the test failed. + log_test 0 1 "Invalid nexthop" + else + check_route "172.16.104.0/24 via 172.16.101.2 dev veth1" + log_test $? 0 "Invalid nexthop" + fi + + # replace non-existent route + # - note use of change versus replace since ip adds NLM_F_CREATE + # for replace + add_initial_route "via 172.16.101.2" + run_cmd "$IP ro change 172.16.105.0/24 via 172.16.101.2" + log_test $? 2 "Single path - replace of non-existent route" +} + +ipv4_rt_replace_mpath() +{ + # multipath with multipath + add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" + run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.3" + check_route "172.16.104.0/24 nexthop via 172.16.101.3 dev veth1 weight 1 nexthop via 172.16.103.3 dev veth3 weight 1" + log_test $? 0 "Multipath with multipath" + + # multipath with single + add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" + run_cmd "$IP ro replace 172.16.104.0/24 via 172.16.101.3" + check_route "172.16.104.0/24 via 172.16.101.3 dev veth1" + log_test $? 0 "Multipath with single path" + + # multipath with single + add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" + run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3" + check_route "172.16.104.0/24 via 172.16.101.3 dev veth1" + log_test $? 0 "Multipath with single path via multipath attribute" + + # multipath with reject + add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" + run_cmd "$IP ro replace unreachable 172.16.104.0/24" + check_route "unreachable 172.16.104.0/24" + log_test $? 0 "Multipath with reject route" + + # route replace fails - invalid nexthop 1 + add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" + run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.111.3 nexthop via 172.16.103.3" + check_route "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" + log_test $? 0 "Multipath - invalid first nexthop" + + # route replace fails - invalid nexthop 2 + add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" + run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.113.3" + check_route "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" + log_test $? 0 "Multipath - invalid second nexthop" + + # multipath non-existent route + add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" + run_cmd "$IP ro change 172.16.105.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.3" + log_test $? 2 "Multipath - replace of non-existent route" +} + +ipv4_rt_replace() +{ + echo + echo "IPv4 route replace tests" + + ipv4_rt_replace_single + ipv4_rt_replace_mpath +} + +ipv4_route_test() +{ + route_setup + + ipv4_rt_add + ipv4_rt_replace + + route_cleanup +} + +ipv4_addr_metric_test() +{ + local rc + + echo + echo "IPv4 prefix route tests" + + ip_addr_metric_check || return 1 + + setup + + set -e + $IP li add dummy1 type dummy + $IP li add dummy2 type dummy + $IP li set dummy1 up + $IP li set dummy2 up + + # default entry is metric 256 + run_cmd "$IP addr add dev dummy1 172.16.104.1/24" + run_cmd "$IP addr add dev dummy2 172.16.104.2/24" + set +e + + check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2" + log_test $? 0 "Default metric" + + set -e + run_cmd "$IP addr flush dev dummy1" + run_cmd "$IP addr add dev dummy1 172.16.104.1/24 metric 257" + set +e + + check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257" + log_test $? 0 "User specified metric on first device" + + set -e + run_cmd "$IP addr flush dev dummy2" + run_cmd "$IP addr add dev dummy2 172.16.104.2/24 metric 258" + set +e + + check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258" + log_test $? 0 "User specified metric on second device" + + run_cmd "$IP addr del dev dummy1 172.16.104.1/24 metric 257" + rc=$? + if [ $rc -eq 0 ]; then + check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258" + rc=$? + fi + log_test $rc 0 "Delete of address on first device" + + run_cmd "$IP addr change dev dummy2 172.16.104.2/24 metric 259" + rc=$? + if [ $rc -eq 0 ]; then + check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259" + rc=$? + fi + log_test $rc 0 "Modify metric of address" + + # verify prefix route removed on down + run_cmd "$IP li set dev dummy2 down" + rc=$? + if [ $rc -eq 0 ]; then + out=$($IP ro ls match 172.16.104.0/24) + check_expected "${out}" "" + rc=$? + fi + log_test $rc 0 "Prefix route removed on link down" + + # verify prefix route re-inserted with assigned metric + run_cmd "$IP li set dev dummy2 up" + rc=$? + if [ $rc -eq 0 ]; then + check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259" + rc=$? + fi + log_test $rc 0 "Prefix route with metric on link up" + + # explicitly check for metric changes on edge scenarios + run_cmd "$IP addr flush dev dummy2" + run_cmd "$IP addr add dev dummy2 172.16.104.0/24 metric 259" + run_cmd "$IP addr change dev dummy2 172.16.104.0/24 metric 260" + rc=$? + if [ $rc -eq 0 ]; then + check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.0 metric 260" + rc=$? + fi + log_test $rc 0 "Modify metric of .0/24 address" + + run_cmd "$IP addr flush dev dummy2" + run_cmd "$IP addr add dev dummy2 172.16.104.1/32 peer 172.16.104.2 metric 260" + rc=$? + if [ $rc -eq 0 ]; then + check_route "172.16.104.2 dev dummy2 proto kernel scope link src 172.16.104.1 metric 260" + rc=$? + fi + log_test $rc 0 "Set metric of address with peer route" + + run_cmd "$IP addr change dev dummy2 172.16.104.1/32 peer 172.16.104.3 metric 261" + rc=$? + if [ $rc -eq 0 ]; then + check_route "172.16.104.3 dev dummy2 proto kernel scope link src 172.16.104.1 metric 261" + rc=$? + fi + log_test $rc 0 "Modify metric and peer address for peer route" + + $IP li del dummy1 + $IP li del dummy2 + cleanup +} + +ipv4_route_metrics_test() +{ + local rc + + echo + echo "IPv4 route add / append tests" + + route_setup + + run_cmd "$IP ro add 172.16.111.0/24 via 172.16.101.2 mtu 1400" + rc=$? + if [ $rc -eq 0 ]; then + check_route "172.16.111.0/24 via 172.16.101.2 dev veth1 mtu 1400" + rc=$? + fi + log_test $rc 0 "Single path route with mtu metric" + + + run_cmd "$IP ro add 172.16.112.0/24 mtu 1400 nexthop via 172.16.101.2 nexthop via 172.16.103.2" + rc=$? + if [ $rc -eq 0 ]; then + check_route "172.16.112.0/24 mtu 1400 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" + rc=$? + fi + log_test $rc 0 "Multipath route with mtu metric" + + $IP ro add 172.16.104.0/24 via 172.16.101.2 mtu 1300 + run_cmd "ip netns exec ns1 ping -w1 -c1 -s 1500 172.16.104.1" + log_test $? 0 "Using route with mtu metric" + + run_cmd "$IP ro add 172.16.111.0/24 via 172.16.101.2 congctl lock foo" + log_test $? 2 "Invalid metric (fails metric_convert)" + + route_cleanup +} + +ipv4_route_v6_gw_test() +{ + local rc + + echo + echo "IPv4 route with IPv6 gateway tests" + + route_setup + sleep 2 + + # + # single path route + # + run_cmd "$IP ro add 172.16.104.0/24 via inet6 2001:db8:101::2" + rc=$? + log_test $rc 0 "Single path route with IPv6 gateway" + if [ $rc -eq 0 ]; then + check_route "172.16.104.0/24 via inet6 2001:db8:101::2 dev veth1" + fi + + run_cmd "ip netns exec ns1 ping -w1 -c1 172.16.104.1" + log_test $rc 0 "Single path route with IPv6 gateway - ping" + + run_cmd "$IP ro del 172.16.104.0/24 via inet6 2001:db8:101::2" + rc=$? + log_test $rc 0 "Single path route delete" + if [ $rc -eq 0 ]; then + check_route "172.16.112.0/24" + fi + + # + # multipath - v6 then v4 + # + run_cmd "$IP ro add 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3" + rc=$? + log_test $rc 0 "Multipath route add - v6 nexthop then v4" + if [ $rc -eq 0 ]; then + check_route "172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" + fi + + run_cmd "$IP ro del 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1" + log_test $? 2 " Multipath route delete - nexthops in wrong order" + + run_cmd "$IP ro del 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3" + log_test $? 0 " Multipath route delete exact match" + + # + # multipath - v4 then v6 + # + run_cmd "$IP ro add 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1" + rc=$? + log_test $rc 0 "Multipath route add - v4 nexthop then v6" + if [ $rc -eq 0 ]; then + check_route "172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 weight 1 nexthop via inet6 2001:db8:101::2 dev veth1 weight 1" + fi + + run_cmd "$IP ro del 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3" + log_test $? 2 " Multipath route delete - nexthops in wrong order" + + run_cmd "$IP ro del 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1" + log_test $? 0 " Multipath route delete exact match" + + route_cleanup +} + +################################################################################ +# usage + +usage() +{ + cat <<EOF +usage: ${0##*/} OPTS + + -t <test> Test(s) to run (default: all) + (options: $TESTS) + -p Pause on fail + -P Pause after each test before cleanup + -v verbose mode (show commands and output) +EOF +} + +################################################################################ +# main + +while getopts :t:pPhv o +do + case $o in + t) TESTS=$OPTARG;; + p) PAUSE_ON_FAIL=yes;; + P) PAUSE=yes;; + v) VERBOSE=$(($VERBOSE + 1));; + h) usage; exit 0;; + *) usage; exit 1;; + esac +done + +PEER_CMD="ip netns exec ${PEER_NS}" + +# make sure we don't pause twice +[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no + +if [ "$(id -u)" -ne 0 ];then + echo "SKIP: Need root privileges" + exit $ksft_skip; +fi + +if [ ! -x "$(command -v ip)" ]; then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +ip route help 2>&1 | grep -q fibmatch +if [ $? -ne 0 ]; then + echo "SKIP: iproute2 too old, missing fibmatch" + exit $ksft_skip +fi + +# start clean +cleanup &> /dev/null + +for t in $TESTS +do + case $t in + fib_unreg_test|unregister) fib_unreg_test;; + fib_down_test|down) fib_down_test;; + fib_carrier_test|carrier) fib_carrier_test;; + fib_rp_filter_test|rp_filter) fib_rp_filter_test;; + fib_nexthop_test|nexthop) fib_nexthop_test;; + fib_suppress_test|suppress) fib_suppress_test;; + ipv6_route_test|ipv6_rt) ipv6_route_test;; + ipv4_route_test|ipv4_rt) ipv4_route_test;; + ipv6_addr_metric) ipv6_addr_metric_test;; + ipv4_addr_metric) ipv4_addr_metric_test;; + ipv6_route_metrics) ipv6_route_metrics_test;; + ipv4_route_metrics) ipv4_route_metrics_test;; + ipv4_route_v6_gw) ipv4_route_v6_gw_test;; + + help) echo "Test names: $TESTS"; exit 0;; + esac +done + +if [ "$TESTS" != "none" ]; then + printf "\nTests passed: %3d\n" ${nsuccess} + printf "Tests failed: %3d\n" ${nfail} +fi + +exit $ret