From: Stephen Suryaputra ssuryaextr@gmail.com
[ Upstream commit 205704c618af0ab2366015d2281a3b0814d918a0 ]
Depending on the order of the routes to fe80::/64 are installed on the VRF table, the NS for the source link-local address of the originator might be sent to the wrong interface.
This patch ensures that packets with link-local addr source is doing a lookup with the orig_iif when the destination addr indicates that it is strict.
Add the reproducer as a use case in self test script fcnal-test.sh.
Fixes: b4869aa2f881 ("net: vrf: ipv6 support for local traffic to local addresses") Signed-off-by: Stephen Suryaputra ssuryaextr@gmail.com Reviewed-by: David Ahern dsahern@kernel.org Link: https://lore.kernel.org/r/20201204030604.18828-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/vrf.c | 10 ++- tools/testing/selftests/net/fcnal-test.sh | 95 ++++++++++++++++++++++++++++++ 2 files changed, 103 insertions(+), 2 deletions(-)
--- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -1315,11 +1315,17 @@ static struct sk_buff *vrf_ip6_rcv(struc int orig_iif = skb->skb_iif; bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr); bool is_ndisc = ipv6_ndisc_frame(skb); + bool is_ll_src;
/* loopback, multicast & non-ND link-local traffic; do not push through - * packet taps again. Reset pkt_type for upper layers to process skb + * packet taps again. Reset pkt_type for upper layers to process skb. + * for packets with lladdr src, however, skip so that the dst can be + * determine at input using original ifindex in the case that daddr + * needs strict */ - if (skb->pkt_type == PACKET_LOOPBACK || (need_strict && !is_ndisc)) { + is_ll_src = ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL; + if (skb->pkt_type == PACKET_LOOPBACK || + (need_strict && !is_ndisc && !is_ll_src)) { skb->dev = vrf_dev; skb->skb_iif = vrf_dev->ifindex; IP6CB(skb)->flags |= IP6SKB_L3SLAVE; --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -256,6 +256,28 @@ setup_cmd_nsb() fi }
+setup_cmd_nsc() +{ + local cmd="$*" + local rc + + run_cmd_nsc ${cmd} + rc=$? + if [ $rc -ne 0 ]; then + # show user the command if not done so already + if [ "$VERBOSE" = "0" ]; then + echo "setup command: $cmd" + fi + echo "failed. stopping tests" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue" + read a + fi + exit $rc + fi +} + # set sysctl values in NS-A set_sysctl() { @@ -471,6 +493,36 @@ setup() sleep 1 }
+setup_lla_only() +{ + # make sure we are starting with a clean slate + kill_procs + cleanup 2>/dev/null + + log_debug "Configuring network namespaces" + set -e + + create_ns ${NSA} "-" "-" + create_ns ${NSB} "-" "-" + create_ns ${NSC} "-" "-" + connect_ns ${NSA} ${NSA_DEV} "-" "-" \ + ${NSB} ${NSB_DEV} "-" "-" + connect_ns ${NSA} ${NSA_DEV2} "-" "-" \ + ${NSC} ${NSC_DEV} "-" "-" + + NSA_LINKIP6=$(get_linklocal ${NSA} ${NSA_DEV}) + NSB_LINKIP6=$(get_linklocal ${NSB} ${NSB_DEV}) + NSC_LINKIP6=$(get_linklocal ${NSC} ${NSC_DEV}) + + create_vrf ${NSA} ${VRF} ${VRF_TABLE} "-" "-" + ip -netns ${NSA} link set dev ${NSA_DEV} vrf ${VRF} + ip -netns ${NSA} link set dev ${NSA_DEV2} vrf ${VRF} + + set +e + + sleep 1 +} + ################################################################################ # IPv4
@@ -3787,10 +3839,53 @@ use_case_br() setup_cmd_nsb ip li del vlan100 2>/dev/null }
+# VRF only. +# ns-A device is connected to both ns-B and ns-C on a single VRF but only has +# LLA on the interfaces +use_case_ping_lla_multi() +{ + setup_lla_only + # only want reply from ns-A + setup_cmd_nsb sysctl -qw net.ipv6.icmp.echo_ignore_multicast=1 + setup_cmd_nsc sysctl -qw net.ipv6.icmp.echo_ignore_multicast=1 + + log_start + run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV} + log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Pre cycle, ping out ns-B" + + run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV} + log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Pre cycle, ping out ns-C" + + # cycle/flap the first ns-A interface + setup_cmd ip link set ${NSA_DEV} down + setup_cmd ip link set ${NSA_DEV} up + sleep 1 + + log_start + run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV} + log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV}, ping out ns-B" + run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV} + log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV}, ping out ns-C" + + # cycle/flap the second ns-A interface + setup_cmd ip link set ${NSA_DEV2} down + setup_cmd ip link set ${NSA_DEV2} up + sleep 1 + + log_start + run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV} + log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV2}, ping out ns-B" + run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV} + log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV2}, ping out ns-C" +} + use_cases() { log_section "Use cases" + log_subsection "Device enslaved to bridge" use_case_br + log_subsection "Ping LLA with multiple interfaces" + use_case_ping_lla_multi }
################################################################################