From: Greg Kroah-Hartman gregkh@linuxfoundation.org
From: Stanislaw Gruszka stf_xl@wp.pl
commit a4a251f8c23518899d2078c320cf9ce2fa459c9f upstream.
On some systems rt2800usb and mt7601u devices are unable to operate since commit f8f80be501aa ("xhci: Use soft retry to recover faster from transaction errors")
Seems that some xHCI controllers can not perform Soft Retry correctly, affecting those devices.
To avoid the problem add xhci->quirks flag that restore pre soft retry xhci behaviour for affected xHCI controllers. Currently those are AMD_PROMONTORYA_4 and AMD_PROMONTORYA_2, since it was confirmed by the users: on those xHCI hosts issue happen and is gone after disabling Soft Retry.
[minor commit message rewording for checkpatch -Mathias]
Fixes: f8f80be501aa ("xhci: Use soft retry to recover faster from transaction errors") Cc: stable@vger.kernel.org # 4.20+ Reported-by: Bernhard bernhard.gebetsberger@gmx.at Tested-by: Bernhard bernhard.gebetsberger@gmx.at Signed-off-by: Stanislaw Gruszka stf_xl@wp.pl Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202541 Link: https://lore.kernel.org/r/20210311115353.2137560-2-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-pci.c | 5 +++++ drivers/usb/host/xhci-ring.c | 3 ++- drivers/usb/host/xhci.h | 1 + 3 files changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -295,6 +295,11 @@ static void xhci_pci_quirks(struct devic pdev->device == 0x9026) xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
+ if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2 || + pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4)) + xhci->quirks |= XHCI_NO_SOFT_RETRY; + if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Resetting on resume"); --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2307,7 +2307,8 @@ static int process_bulk_intr_td(struct x remaining = 0; break; case COMP_USB_TRANSACTION_ERROR: - if ((ep_ring->err_count++ > MAX_SOFT_RETRY) || + if (xhci->quirks & XHCI_NO_SOFT_RETRY || + (ep_ring->err_count++ > MAX_SOFT_RETRY) || le32_to_cpu(slot_ctx->tt_info) & TT_SLOT) break; *status = 0; --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1879,6 +1879,7 @@ struct xhci_hcd { #define XHCI_SKIP_PHY_INIT BIT_ULL(37) #define XHCI_DISABLE_SPARSE BIT_ULL(38) #define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39) +#define XHCI_NO_SOFT_RETRY BIT_ULL(40)
unsigned int num_active_eps; unsigned int limit_active_eps;