6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikhail Kshevetskiy mikhail.kshevetskiy@iopsys.eu
[ Upstream commit 0b7d9b25e4bc2e478c9d06281a65f930769fca09 ]
Attaching UBI on the flash with more than one plane per lun will lead to the following error:
[ 2.980989] spi-nand spi0.0: Micron SPI NAND was found. [ 2.986309] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 [ 2.994978] 2 fixed-partitions partitions found on MTD device spi0.0 [ 3.001350] Creating 2 MTD partitions on "spi0.0": [ 3.006159] 0x000000000000-0x000000020000 : "bl2" [ 3.011663] 0x000000020000-0x000010000000 : "ubi" ... [ 6.391748] ubi0: attaching mtd1 [ 6.412545] ubi0 error: ubi_attach: PEB 0 contains corrupted VID header, and the data does not contain all 0xFF [ 6.422677] ubi0 error: ubi_attach: this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection [ 6.434249] Volume identifier header dump: [ 6.438349] magic 55424923 [ 6.441482] version 1 [ 6.444007] vol_type 0 [ 6.446539] copy_flag 0 [ 6.449068] compat 0 [ 6.451594] vol_id 0 [ 6.454120] lnum 1 [ 6.456651] data_size 4096 [ 6.459442] used_ebs 1061644134 [ 6.462748] data_pad 0 [ 6.465274] sqnum 0 [ 6.467805] hdr_crc 61169820 [ 6.470943] Volume identifier header hexdump: [ 6.475308] hexdump of PEB 0 offset 4096, length 126976 [ 6.507391] ubi0 warning: ubi_attach: valid VID header but corrupted EC header at PEB 4 [ 6.515415] ubi0 error: ubi_compare_lebs: unsupported on-flash UBI format [ 6.522222] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22 [ 6.529294] UBI error: cannot attach mtd1
Non dirmap reading works good. Looking to spi_mem_no_dirmap_read() code we'll see:
static ssize_t spi_mem_no_dirmap_read(struct spi_mem_dirmap_desc *desc, u64 offs, size_t len, void *buf) { struct spi_mem_op op = desc->info.op_tmpl; int ret;
// --- see here --- op.addr.val = desc->info.offset + offs; //----------------- op.data.buf.in = buf; op.data.nbytes = len; ret = spi_mem_adjust_op_size(desc->mem, &op); if (ret) return ret;
ret = spi_mem_exec_op(desc->mem, &op); if (ret) return ret;
return op.data.nbytes; }
The similar happens for spi_mem_no_dirmap_write(). Thus the address passed to the flash should take in the account the value of desc->info.offset.
This patch fix dirmap reading/writing of flashes with more than one plane per lun.
Fixes: a403997c12019 ("spi: airoha: add SPI-NAND Flash controller driver") Signed-off-by: Mikhail Kshevetskiy mikhail.kshevetskiy@iopsys.eu Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Link: https://patch.msgid.link/20251012121707.2296160-7-mikhail.kshevetskiy@iopsys... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-airoha-snfi.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-airoha-snfi.c b/drivers/spi/spi-airoha-snfi.c index 8143fbb0cf4e6..b78163eaed61d 100644 --- a/drivers/spi/spi-airoha-snfi.c +++ b/drivers/spi/spi-airoha-snfi.c @@ -733,8 +733,9 @@ static ssize_t airoha_snand_dirmap_read(struct spi_mem_dirmap_desc *desc, if (err) goto error_dma_unmap;
- /* set read addr */ - err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_RD_CTL3, 0x0); + /* set read addr: zero page offset + descriptor read offset */ + err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_RD_CTL3, + desc->info.offset); if (err) goto error_dma_unmap;
@@ -870,7 +871,9 @@ static ssize_t airoha_snand_dirmap_write(struct spi_mem_dirmap_desc *desc, if (err) goto error_dma_unmap;
- err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_PG_CTL2, 0x0); + /* set write addr: zero page offset + descriptor write offset */ + err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_PG_CTL2, + desc->info.offset); if (err) goto error_dma_unmap;